RF-ID Transponder operating at 13.56 MHz Radio Frequency Identification Systems (RF-ID) are widely used and allow advanced solutions for a variety of applications in the area of authentication, ticketing, access control, supply management, etc. The example presented here is operating at 13.56 MHz with dimensions given by an Internet data sheet. After rebuilding the 3D geometrical model the frequency domain solver of CST MICROWAVE STUDIO has been used to accurately compute the input impedance versus a limited frequency band. In another step the impedance data has been used as a reference to develope a simple equivalent circuit consisting of lumped elements. Figure 1: Photo of the transponder Figure 1. shows a typical example of an RFID. Dimensions are publically available, e.g. on the Internet. The 2D-layout was modeled in CST MWS. Applying appropriate extrusion operations to create metal thicknesses and by adding the substrate (with an assumed epsilon-rel=3) the model was converted into a 3D model shown in Figure 2. Figure 2: 3D- Model of the RF-ID tag used for simulation 2012 CST AG - http://www.cst.com Page 1 of 3
The frequency domain solver was applied to calculate the S-Parameter as the primary result, shown as Smith-Chart representation in Figure 3. The mesh consisted of approximately 300.000 Hexa-meshcells with a runtime of 20 min per frequency point (2.6 GHz PC); 5 frequency points gave the required accuracy for the broadband result covering the range of 10-15 MHz. Figure 3: Smith Chart Representation of the reflection parameter S11 The reflection coefficient can be used to be converted into an impedance curve which is more convenient for illustration purposes. The result of this conversion is shown in Figure 4: The real part of the impedance shows its maximum at the resonance of about 13.56 MHz, whereas the the reactance passes a zero crossing. The behaviour of the impedance curve is very much similar to a parallel LC resonance circuit with a small damping included. Thus a simple RLC parallel resonance circuit was used as equivalent circuit and the three lumped element values of R, L and C where found by a curve-fit optimization of the reflection coefficient S11 within CST DS. Impedance curves are shown for both, the 3D model and the equivalent circuit model in Figure 4. The Q-factor of the equivalent circuit is computed by the equation Q= 1/(1/R*sqrt(L/C)) = 25.9. Figure 4: Impedance R+jX of the 3D model and the equivalent circuit model. For small band comparison the results agree very well 2012 CST AG - http://www.cst.com Page 2 of 3
Not only integral parameters can be computed in CST MWS but also near fields of the calculation domain. Current distributions and magnetic field radiations can be observed and quantified. Figure 5: Depicted here is the surface current distribution of the coil and the magn fieldstrength along a vertical cutplane at 13.56 MHz Conclusion: The application example of an RF-ID demonstrates the ability of CST MWS to simulate antenna structures in a low frequency band helping to understand and describe the characteristics of the device without heavy prototyping. 2012 CST AG - http://www.cst.com Page 3 of 3
易迪拓培训 专注于微波 射频 天线设计人才的培养网址 :http://www.edatop.com 射频和天线设计培训课程推荐 易迪拓培训 (www.edatop.com) 由数名来自于研发第一线的资深工程师发起成立, 致力并专注于微波 射频 天线设计研发人才的培养 ; 我们于 2006 年整合合并微波 EDA 网 (www.mweda.com), 现已发展成为国内最大的微波射频和天线设计人才培养基地, 成功推出多套微波射频以及天线设计经典培训课程和 ADS HFSS 等专业软件使用培训课程, 广受客户好评 ; 并先后与人民邮电出版社 电子工业出版社合作出版了多本专业图书, 帮助数万名工程师提升了专业技术能力 客户遍布中兴通讯 研通高频 埃威航电 国人通信等多家国内知名公司, 以及台湾工业技术研究院 永业科技 全一电子等多家台湾地区企业 易迪拓培训课程列表 :http://www.edatop.com/peixun/rfe/129.html 射频工程师养成培训课程套装该套装精选了射频专业基础培训课程 射频仿真设计培训课程和射频电路测量培训课程三个类别共 30 门视频培训课程和 3 本图书教材 ; 旨在引领学员全面学习一个射频工程师需要熟悉 理解和掌握的专业知识和研发设计能力 通过套装的学习, 能够让学员完全达到和胜任一个合格的射频工程师的要求 课程网址 :http://www.edatop.com/peixun/rfe/110.html ADS 学习培训课程套装该套装是迄今国内最全面 最权威的 ADS 培训教程, 共包含 10 门 ADS 学习培训课程 课程是由具有多年 ADS 使用经验的微波射频与通信系统设计领域资深专家讲解, 并多结合设计实例, 由浅入深 详细而又全面地讲解了 ADS 在微波射频电路设计 通信系统设计和电磁仿真设计方面的内容 能让您在最短的时间内学会使用 ADS, 迅速提升个人技术能力, 把 ADS 真正应用到实际研发工作中去, 成为 ADS 设计专家... 课程网址 : http://www.edatop.com/peixun/ads/13.html HFSS 学习培训课程套装该套课程套装包含了本站全部 HFSS 培训课程, 是迄今国内最全面 最专业的 HFSS 培训教程套装, 可以帮助您从零开始, 全面深入学习 HFSS 的各项功能和在多个方面的工程应用 购买套装, 更可超值赠送 3 个月免费学习答疑, 随时解答您学习过程中遇到的棘手问题, 让您的 HFSS 学习更加轻松顺畅 课程网址 :http://www.edatop.com/peixun/hfss/11.html `
易迪拓培训 专注于微波 射频 天线设计人才的培养网址 :http://www.edatop.com CST 学习培训课程套装该培训套装由易迪拓培训联合微波 EDA 网共同推出, 是最全面 系统 专业的 CST 微波工作室培训课程套装, 所有课程都由经验丰富的专家授课, 视频教学, 可以帮助您从零开始, 全面系统地学习 CST 微波工作的各项功能及其在微波射频 天线设计等领域的设计应用 且购买该套装, 还可超值赠送 3 个月免费学习答疑 课程网址 :http://www.edatop.com/peixun/cst/24.html HFSS 天线设计培训课程套装套装包含 6 门视频课程和 1 本图书, 课程从基础讲起, 内容由浅入深, 理论介绍和实际操作讲解相结合, 全面系统的讲解了 HFSS 天线设计的全过程 是国内最全面 最专业的 HFSS 天线设计课程, 可以帮助您快速学习掌握如何使用 HFSS 设计天线, 让天线设计不再难 课程网址 :http://www.edatop.com/peixun/hfss/122.html 13.56MHz NFC/RFID 线圈天线设计培训课程套装套装包含 4 门视频培训课程, 培训将 13.56MHz 线圈天线设计原理和仿真设计实践相结合, 全面系统地讲解了 13.56MHz 线圈天线的工作原理 设计方法 设计考量以及使用 HFSS 和 CST 仿真分析线圈天线的具体操作, 同时还介绍了 13.56MHz 线圈天线匹配电路的设计和调试 通过该套课程的学习, 可以帮助您快速学习掌握 13.56MHz 线圈天线及其匹配电路的原理 设计和调试 详情浏览 :http://www.edatop.com/peixun/antenna/116.html 我们的课程优势 : 成立于 2004 年,10 多年丰富的行业经验, 一直致力并专注于微波射频和天线设计工程师的培养, 更了解该行业对人才的要求 经验丰富的一线资深工程师讲授, 结合实际工程案例, 直观 实用 易学 联系我们 : 易迪拓培训官网 :http://www.edatop.com 微波 EDA 网 :http://www.mweda.com 官方淘宝店 :http://shop36920890.taobao.com 专注于微波 射频 天线设计人才的培养易迪拓培训官方网址 :http://www.edatop.com 淘宝网店 :http://shop36920890.taobao.com