pages.pdf

Size: px

Start display at page:

Download "pages.pdf"

指榭崔
7 years ago
Views:

microstrip patch antenna for Wireless Local Area Network (WLAN) application is proposed. Dual band characteristic for the 2.4 GHz band and the 5 GHz band is produced by using U-slot and T-slot.

1 A Novel Dual-Band Microstrip Antenna for WLAN Application R.J. Lin, M. Ye School of Communication and Information Engineering, Shanghai University, Shanghai , China Keywords: dual-band; microstrip antenna; WLAN; U-slot; T- slot Abstract A novel dual-band microstrip patch antenna for Wireless Local Area Network (WLAN) application is proposed. Dual band characteristic for the 2.4 GHz band and the 5 GHz band is produced by using U-slot and T-slot. The rectangular window for ground plate is used to increase the impedance bandwidth. This design can completely cover the 2.4/5 GHz band for IEEE b/g and a standards. axis and the distance from the feed point to right margin of the patch is L 5. The antenna parameters are determined by using the commercial simulation software Ansoft HFSS Introduction With the rapid development of wireless communications, wireless local area network (WLAN) applications nowadays have become more popular. WLAN provides wireless communication between the client devices with an access point in a local network. According to the standard of IEEE for WLAN, the network works at 2.4 GHz band ( GHz for IEEE b/g) and 5 GHz band ( GHz and GHz for IEEE a). Antenna is an important device in WLAN communication system because its performance will directly impact on the quality of wireless communications. Moreover, one antenna that can operate at all these frequencies is more efficient than several antennas for each frequency band. Therefore dualband antenna which can work at IEEE standards for WLAN is needed. In recent years, some dual-band antennas for WLAN application have proposed such as [1-4]. However, these researches can not cover all of the WLAN frequencies. In this paper, we proposed a dual-band antenna which can completely cover the all of the WLAN frequencies. The proposed antenna is composed of U-slot and T-slot on the patch and a rectangular window for ground plate. (a) (b) 2 Antenna design and analysis The geometry of the proposed dual-band antenna is showed in Fig. 1. The substrate considered for this study is FR4_expoy ( r =4.4) and the thickness of the substrate is h=4mm. The proposed antenna occupies a size of W L. U-slot and T-slot are on the horizontal axis of symmetry. The parameters of U- slot are: D 1, L 3, W 2, W 4, and W 5. The parameters of T-slot are: D, L 2, W 1 and W 3. The distance from T-slot to left margin of the patch is L 1. A rectangular window of D 2 L 6 for ground plate is on the horizontal axis of symmetry. The distance from the bottom of the rectangular window to right margin of the patch is L 7. The feed point of the antenna is at the horizontal (c) Fig.1 Configuration of the proposed antenna (a) top view, (b) bottom view and (c) side view The proposed antenna is composed of U-slot and T-slot on the patch and a rectangular window for ground plate. Dual band characteristic for the 2.4GHz band and the 5 GHz is produced by using U-slot and T-slot. The rectangular window for ground plate is used to increase the impedance bandwidth. Fig. 2 shows the simulated return loss for the proposed antenna 269

2 with various L 3. It is found that with the increase of L 3, the lower resonant frequency is decreased and the upper resonant frequency is increased. Fig. 3 shows the simulated return loss for the proposed antenna with various D. It is found that with the increase of D, the lower resonant frequency is slightly affected and the upper resonant frequency is increased. In Fig. 2, other parameters used for this study are: W = 30 mm, L = 46 mm, L 1 = 4.5 mm, D = 14 mm, W 1 = 2 mm, L 4 = 4.5 mm, D 1 = 17 mm, W 2 = 2 mm, L 2 = 15 mm, W 3 = 2 mm, W 4 = 2 mm, W 5 = 2 mm, L 5 = 16 mm, L 6 = 7 mm, D 2 = 24 mm, L 7 = 37.5 mm. In Fig. 3, other parameters are: W = 30 mm, L = 46 mm, L 1 = 4.5 mm, W 1 = 2 mm, L 4 = 4.5 mm, D 1 = 17 mm, W 2 = 2 mm, L 2 = 15 mm, L 3 = 14.5 mm, W 3 = 2 mm, W 4 = 2 mm, W 5 = 2 mm, L 5 = 16 mm, L 6 = 7 mm, D 2 = 24 mm, L 7 = 37.5 mm GHz). Figs. 5, 6 and 7 show the simulated normalized radiation patterns at 2.45 GHz, 5.2 GHz and 5.8 GHz. It is observed that the lower and higher bands have similar radiation characteristics. The simulated peak gain of the proposed antenna is 4.48dBi, 5.1dBi and 6.5dBi at 2.45 GHz, 5.2 GHz and 5.8 GHz respectively. Fig.4 Simulated return loss for the proposed antenna Fig.2 Return loss against frequency for various L 3 Fig.5 Normalized radiation patterns at 2.45 GHz Fig.3 Return loss against frequency for various D 3 Simulated results After an abundant parametric study, the proposed antenna parameters are set as follows: W=30mm, L=46mm, L 1 =4.5mm, D=14mm, W 1 =2mm, L 4 =4.5mm, D 1 =17mm, W 2 =2mm, L 2 =15mm, L 3 =14.5mm, W 3 =2mm, W 4 =2mm, W 5 =2mm, L 5 =16mm, L 6 =7mm, D 2 =24mm, L 7 =37.5mm. Fig. 4 shows the simulated return loss of this proposed antenna. The simulated impedance bandwidth for -10dB return loss is from 2.40 GHz to 2.49 GHz and 5.15 GHz to 5.89 GHz, covering the two standard WLAN bands at IEEE b/g ( GHz) and IEEE a ( GHz and Fig.6 Normalized radiation patterns at 5.2 GHz 270

3 Fig.7 Normalized radiation patterns at 5.8 GHz 4 Conclusion A dual-band microstrip antenna for WLAN application has been proposed in this paper. The simulated impedance bandwidth for -10dB return loss is from 2.40 GHz to 2.49 GHz and 5.15 GHz to 5.89 GHz, covering 2.4 GHz ( GHz) and 5 GHz ( GHz and GHz) WLAN bands. It is shown that the proposed antenna is suitable for WLAN application. References [1] V. Deepu, R. Sujith, S. Mridula. ACS fed printed F-shaped uniplanar antenna for dual band WLAN applications, Microwave and Optical Technology Letters, 51, pp , (2009). [2] Gyoo-Soo Chae, Joong-Soo Lim, Min-Nyun Kim. Compact planar antennas with a parasitic shorted-strip for dual-band WLAN, Microwave and Optical Technology Letters, 50, pp , (2008). [3] Augustin, G, Shynu, S.V, Mohanan, P. Compact dualband antenna for wireless access point, Electronic Letters, 42, pp , (2006). [4] Yong-shuai Zheng, Shao-jun Fang. Dual-Band Rectangular Patch Antenna with a Pair of L-Shaped Slots for WLAN, in IEEE International Symposium on Microwave, Antena, Propagation and EMC Technologies for Wireless Communication Proceedings,

易迪拓培训专注于微波射频天线设计人才的培养网址 :http://www.edatop.

4 易迪拓培训专注于微波射频天线设计人才的培养网址 : H F S S 视频培训课程推荐 HFSS 软件是当前最流行的微波无源器件和天线设计软件, 易迪拓培训 ( 是国内最专业的微波射频和天线设计培训机构为帮助工程师能够更好更快地学习掌握 HFSS 的设计应用, 易迪拓培训特邀李明洋老师主讲了多套 HFSS 视频培训课程李明洋老师具有丰富的工程设计经验, 曾编著出版了 HFSS 电磁仿真设计应用详解 HFSS 天线设计等多本 HFSS 专业图书视频课程, 专家讲解, 直观易学, 是您学习 HFSS 的最佳选择 HFSS 学习培训课程套装该套课程套装包含了本站全部 HFSS 培训课程, 是迄今国内最全面最专业的 HFSS 培训教程套装, 可以帮助您从零开始, 全面深入学习 HFSS 的各项功能和在多个方面的工程应用购买套装, 更可超值赠送 3 个月免费学习答疑, 随时解答您学习过程中遇到的棘手问题, 让您的 HFSS 学习更加轻松顺畅课程网址 : HFSS 天线设计培训课程套装套装包含 6 门视频课程和 1 本图书, 课程从基础讲起, 内容由浅入深, 理论介绍和实际操作讲解相结合, 全面系统的讲解了 HFSS 天线设计的全过程是国内最全面最专业的 HFSS 天线设计课程, 可以帮助您快速学习掌握如何使用 HFSS 设计天线, 让天线设计不再难课程网址 : 更多 HFSS 视频培训课程 : 两周学会 HFSS 中文视频培训课程课程从零讲起, 通过两周的课程学习, 可以帮助您快速入门自学掌握 HFSS, 是 HFSS 初学者的最好课程, 网址 : HFSS 微波器件仿真设计实例中文视频教程 HFSS 进阶培训课程, 通过十个 HFSS 仿真设计实例, 带您更深入学习 HFSS 的实际应用, 掌握 HFSS 高级设置和应用技巧, 网址 : HFSS 天线设计入门中文视频教程 HFSS 是天线设计的王者, 该教程全面解析了天线的基础知识 HFSS 天线设计流程和详细操作设置, 让 HFSS 天线设计不再难, 网址 : 更多 HFSS 培训课程, 敬请浏览 :

5 ` 专注于微波射频天线设计人才的培养易迪拓培训网址 : 关于易迪拓培训 : 易迪拓培训 ( 由数名来自于研发第一线的资深工程师发起成立, 一直致力和专注于微波射频天线设计研发人才的培养 ; 后于 2006 年整合合并微波 EDA 网 ( 现已发展成为国内最大的微波射频和天线设计人才培养基地, 成功推出多套微波射频以及天线设计相关培训课程和 ADS HFSS 等专业软件使用培训课程, 广受客户好评 ; 并先后与人民邮电出版社电子工业出版社合作出版了多本专业图书, 帮助数万名工程师提升了专业技术能力客户遍布中兴通讯研通高频埃威航电国人通信等多家国内知名公司, 以及台湾工业技术研究院永业科技全一电子等多家台湾地区企业我们的课程优势 : 成立于 2004 年,10 多年丰富的行业经验一直专注于微波射频和天线设计工程师的培养, 更了解该行业对人才的要求视频课程既能达到现场培训的效果, 又能免除您舟车劳顿的辛苦, 学习工作两不误经验丰富的一线资深工程师讲授, 结合实际工程案例, 直观实用易学联系我们 : 易迪拓培训官网 : 微波 EDA 网 : 官方淘宝店 : 专注于微波射频天线设计人才的培养易迪拓培训官方网址 : 淘宝网店 :

PowerPoint Presentation

PowerPoint Presentation Sizing Handbook I 6 to 10 10w, w or 5w (3 to 4), w < Note: Port sizing guidelines are not inviolable rules true in all cases. For example, if meeting te eigt and widt requirements outlined result in a