IT8212...2 (1) IDE... 2 (2) BIOS IDE RAID... 3 (3) RAID BIOS RAID... 5 (4) R A I D... 13 (5) ID E RA ID... 15
Ác Åé å IT8212 (1) IDE (2) BIOS IDE RAID (3) RAID BIOS RAID (4) RAID (5) RAID (a) ( )IDE ( IDE RAID ) (b) (c) Windows XP 2000 (d) (1) IDE IDE IDE IDE GA-8I875 Ultra IT8212 IDE IDE3 IDE4 ITE8212 IDE RAID - 2 -
(2) BIOS IDE RAID BIOS IDE RAID 1 BIOS POST (Power-On Self Test ) <Del> BIOS CMOS SETUP RAID Integrated Peripherals Onboard H/W GIGARAID Enabled GigaRAID Function RAID ( 1) RAID GigaRAID Function ATA CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals On-Chip Primary PCI IDE On-Chip Secondary PCI IDE On-Chip SATA [Auto] x SATA Port0 Configure as SATA Port0 SATA Port1 Configure as SATA Port1 SATA RAID Function USB Controller USB 2.0 Controller USB Keyboard Support [Disabled] USB Mouse Support [Disabled] AC97 Audio [Auto] Onboard H/W SATA Serial ATA Function [RAID] Onboard H/W GIGARAID GigaRAID Function [RAID] Onboard H/W 1394 Onboard H/W LAN Onboard Serial Port 1 [3F8/IRQ4] Onboard Serial Port 2 [2F8/IRQ3] 1 Item Help Menu Level If a hard disk controller card is used, set as Disabled Enabled onboard IDE Port [Disabled] Disabled onboard IDE Port : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults - 3 - ITE 8212 IDE RAID
Ác Åé å 2 Advanced BIOS Features Hard Disk Boot Priority Microsoft Windows 2000/XP IDE 1. SCSI-0: IT8212 ( 2 ) 1. SCSI-0 : IT8212 2. Bootable Add-in Cards CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Hard Disk Boot Priority Item Help Menu Level Use < > or < > to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu. : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit 2 3 First Boot Device CD-ROM CD-ROM ( 3) Hard Disk Boot Priority First Boot Device Second Boot Device Third Boot Device Password Check Limit CPUID Max. to 3 DRAM Data Integrity Mode CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Advanced BIOS Features [Press Enter] [CDROM] [Hard Disk] [CDROM] [Setup] Non-ECC Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 3 4 B I O S ITE8212 IDE RAID - 4 -
(3) RAID BIOS RAID IDE RAID BIOS RAID BIOS POST (Power-On Self Test ) 4 <Ctrl>+<G> <F4> GigaRAID BIOS GigaRAID BIOS V1.41 F/W Ver 02093030 Copyright 2002-2003 ITE, Inc. All Rights Reserved Press wait for IDE scan... Drive 0: Maxtor 6E030L0 IDE 0 Drive 1: Not Detected Drive 3: Maxtor 6E030L0 IDE2 Drive 4: Not Detected Press <Ctrl-G> to enter Setup Utility or Press <ESC> or <S> to continue booting... 4 GigaRAID Setup Utility 5 : < 1> ~< 5> Auto Configuration [1]: Define RAID [2]: Delete RAID [3]: Rebuild RAID [4]: ( RAID 1 RAID 0+1) RAID Card Configuration [5]: RAID GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. [ Main Menu ] ] Auto Configuration... [ 1 ] Define RAID... [ 2 ] Delete RAID... [ 3 ] Rebuild RAID... [ 4 ] RAID Card Configuration... [ 5 ] [1]..[5] Select [ESC] Exit 5-5 - ITE 8212 IDE RAID
Ác Åé å (A uto Con fig urat ion ) < 1 > 6 Auto Configuration Menu: <Space> Setup Array Type as RA ID 0 RA ID 1 R AID 0+ 1 JBOD Normal ( ATA ) 6 RAID 0 Array Configuration: GigaRAID Setup GigaRAID Utility Setup (C)Copyright Utility (C)Copyright 2002-2003 ITE, 2002-2003 Inc. ITE, Inc. RAID <Ctrl>+<Y> < Y > [ Auto Configuration Menu ] ] Setup Array Type as: RAID0 [ Array Configuration ] ] RAID Mode... Stripe Un-used Drives... 0 Drive(s) in Array... 2 Array Capacity (size in MB)... 55791 6 [, Space] Change Option [CTRL-Y] Save [ESC] Exit 6 ITE8212 IDE RAID - 6 -
(D ef in e RA ID ): RAID 1/R AID 0+1 < 2 > 7 A r ra y N u mb e r. Array Number <Enter> Define RAID Sub-Menu ( 8) GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. [ Define RAID Menu ] Array No Array Mode Drive No Size(MB) Status Array 0 ---- ---- ---- ---- Array 1 ---- ---- ---- ---- Array 2 ---- ---- ---- ---- Array 3 ---- ---- ---- ---- * : Capacity (GB) : Bootable Array [ ] Up [ ] Down [Space] Boot Array [Enter] Select [ESC] Exit 7-7 - ITE 8212 IDE RAID
Ác Åé å (Define RAID Sub-Menu) ( 8): < S p a c e > - - 1. (A rray Mo de): Sp ace Span Stripe Mirror Stripe+Mirror Stripe 2. (Block Size) Stripe Stripe+Mirror 1KB 2KB 4KB 8KB 16KB 32KB 64KB 3. ( A ss i g n m en t ) R AI D Assignment <Space> Y Y RA ID Dr iv e No Y 4. <Ctrl>+<Y> 5. < Y> < N > S t a - tus Functional. 6. <Esc> Define RAID ( 9) GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. [ Define RAID Sub-Menu ] Array No Array Mode Drive No Status Array 0 Stripe 0 Non-functional Block Size: 64KB [ Drive Assignments ] Channel ID Drive Name Size (MB) Assignment Pri/D0 Maxtor 6E030L0 29324 N Sec/D0 Maxtor 6E030L0 29324 N * : Capacity (GB) [ ] Up [ ] Down [Space] Change Option [Ctrl-Y] Save [ESC] Exit 8 ITE8212 IDE RAID - 8 -
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, ITE, Inc. Inc. [ Define RAID Menu ] Array No Array Mode Drive No Size(MB) Status Array 0 Striped 2 55791 Functional Array 1 ---- ---- ---- ---- Array 2 ---- ---- ---- ---- Array 3 ---- ---- ---- ---- * : Capacity (GB) : Bootable Array [ ] Up [ ] Down [Space] Boot Array [Enter] Select [ESC] Exit 9 : - 9 - ITE 8212 IDE RAID
Ác Åé å (Delete RAID): 3 1 0 < D e l > GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. [ Delete RAID Menu ] Array No Array Mode Drive No Size(MB) Status Array 0 Stripe 2 55791 Functional Array 1 ---- ---- ---- ---- Array 2 ---- ---- ---- ---- Array 3 ---- ---- ---- ---- * : Capacity (GB) : Bootable Array [ ] Up [ ] Down [Del] Delete [ESC] Exit 10 1 1 < C t r l > +<Y> "Erase the data in the array?" < Y > GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. [ Delete RAID Sub-Menu ] Array No Array Mode Drive No Status Array 0 Stripe 2 Functional Block Size: 64KB [ Drive Assignments ] Channel ID Drive Name Size (MB) Assignment Pri/D0 Maxtor 6E030L0 29324 Y Sec/D0 Maxtor 6E030L0 29324 Y Are you sure you want to delete this array? Press Ctrl-Y to Delete or other key to abort * : Capacity (GB) 11 ITE8212 IDE RAID - 10 -
(R ebui ld RAID ): RAID 1 RAID 0+1 <4 > Re bui ld RAI D ( 12) RAID 1 RAID 0+1 GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. [ Rebuild RAID Menu ] Array No Array Mode Drive No Size(MB) Status Array 0 Mirror 2 29875 Functional Array 1 ---- ---- ---- ---- Array 2 ---- ---- ---- ---- Array 3 ---- ---- ---- ---- * : Capacity (GB) : Bootable Array [ ] Up [ ] Down [Enter] Select [ESC] Exit 12 < En t e r> 1 3 < E n t e r > GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. [ Source Drive ] Channel ID Drive Name Size (MB) [ Target Drive ] Channel ID Drive Name Size (MB) [ Drive List ] Channel ID Drive Name Size (MB) Pri/D0 Maxtor 6E030L0 27895 Sec/D0 Maxtor 6E030L0 27895 * : Capacity (GB) : Bootable Array [ ] Up [ ] Down [Enter] Select [ESC] Exit 13-11 - ITE 8212 IDE RAID
Ác Åé å So urc e D riv e Ta rge t D riv e < Y > ( 1 4 ) ("Do you like monitoring the reconstruction status till it completes?") <Y> GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. [ Source Drive ] Channel ID Drive Name Size (MB) Pri/D0 Maxtor 6E030L0 27895 [ Target Drive ] Channel ID Drive Name Size (MB) Sec/D0 Maxtor 6E030L0 27895 Start to duplicate the image Do you like to continue? Y- Continue [ / ESC- Drive Abort List ] Channel ID Drive Name Size (MB) Pri/D0 Maxtor 6E030L0 27895 Sec/D0 Maxtor 6E030L0 27895 * : Capacity (GB) : Bootable Array [ ] Up [ ] Down [Enter] Select [ESC] Exit 14 ITE8212 IDE RAID - 12 -
RAID Card Configuration: < 5 > 1 5 RAID Card Configuration: Auto-Rebuild Enabled ( Space ) GigaRAID Disabled 8 Re bui ld RAI D RAID Card Resource: GigaRAID I/O Driver Status: GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc. Auto-Rebuild: [ RAID Card Configuration ] Disabled [ RAID Card Resource ] Channel 0 Interrupt: A I/P Port: 0008410 Channel 1 Interrupt: A I/P Port: 0008C10 [ Drive Status] Channel Size Drive ID Drive Name (MB) Array No Mode Pri/D0 Maxtor 6E030L0 27895 Array 0 U6 Sec/D0 Maxtor 6E030L0 27895 Array 0 U6 * : Capacity (GB) Drive Mode: P: PIO, D:DMA, U: UDMA [, Space] Change Option [ESC] Exit 15-13 - ITE 8212 IDE RAID
Ác Åé å (4) R A I D Microsoft Windows 2000/XP IDE RAID I DE R AI D R A I D 1 2 ( 1 6 ) 11 16 B o o t D r v MENU.EXE( 17) 17 ITE8212 IDE RAID - 14 -
3 ME NU. EX E MS -D OS ( 1 8 ) 18 4 < 2 > ( 2 ) G I GA R A I D G i g a R A I D 5 ( 19 ) <0 > Gig arai D 19-15 - ITE 8212 IDE RAID
Ác Åé å (5) IDE RAID Gig arai D BIO S Microsoft Windows 2000 XP IDE ( Microsoft Windows XP ) 1 Microsoft Windows 2000 XP Press F6 if you need to install a 3rd party SCSI or RAID driver < F 6 > ( 2 0 ) < F 6 > 2 1 < F 6 > 1 Windows Setup Press F6 if you need to install a 3rd party SCSI or RAID driver. 20 2 Gig arai D <S > ( 21 ) Windows Setup Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s) <none> * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit 21 ITE8212 IDE RAID - 16 -
3 RAID Controller (Windows 2000/XP) ( 22) ( 22) Windows XP "ITE IT8212 ATA 22 GigaRAID 4 <Enter> GigaRAID 23-17 - ITE 8212 IDE RAID
Ác Åé å G i g a R A I D ( 2 4 ) <ENTER> Microsoft Windows 2000 XP WindowsXP Professional Microsoft(R) Windows (R) XP Windows XP Windows XP indows XP ENTER= R= F3= 24 ITE8212 IDE RAID - 18 -