USB3.0 SA-DK2-U3R 2007.0
2 3 4 5 6 7 8 System Info. Manual Rebuild Delete RAID RAID Alarm Rebuild Rate Auto compare Temp Management Load Default Elapse time Event Log <<Warning!!>> 0 2 3 4
2
3
4 ESC
5
6
2 2 7
3. 2. 2 2 3 3 4 8
5 6 6 5 6 3. 4. 3. 3 4
4 Mode not created. 2. 3. SA-DK2-U3R Booting RAID Ver.0 Booting SA-DK2-U3R 2ch-RAID BOX <<Warning!!>> Mode not create! 4. ESC <<Warning!!>> Mode not create! 0
2 Set RAID0 mode OK? > RAID 3 Select Primary Disk: HDD is too Small!! 3 4 4 All data on HDD will be lost? No Yes Do you want to [Quit]? No Yes 5 Switching mode Please wait... 6 7 SA-DK2-U3R RAID0 Ready Limited capacity to 2TB? No Yes Yes 5
5. 2. 6 2
6. 2. 5 6 4 6 3
3. 4. 5. 4
6. 6 5
7. 2. 3. SA-DK2-U3R Booting RAID Ver.0 Booting SA-DK2-U3R 2ch-RAID BOX SA-DK2-U3R RAID0 Ready 0. 2. 6
7 7 8 8 2. 3.. 4. 5. SA-DK2-U3R RAID0 Ready <<Warning!!>> Mode mismatch! 0
SA-DK2-U3R RAID Ready ESC ESC 8
SA-DK2-U3R RAID Ready System Info. RAID Setting Manual Rebuild Delete RAID RAID Alarm OFF Rebuild Rate Fast Auto compare OFF Advanced Setting Temp Management Load Default Event Log Elapse time 0 Day 02:43:35 <<Worning!!>>
System Info. System Info. 2 RAID Ready Capacity :.83TB 3 S:Good Info. 4 5 6 ESC Model : SAMSUNG HD203WI S/N: JLZ200606 Capacity :.83TB :3 7 S:Good Info. 4 6 8 ESC Firmware Ver.0 Version 20
Manual Rebuild Manual Rebuild 2 ESC Select Primary Disk : 4 5 6 Rebuild > 2 continue? Yes 3 Rebuild > 2 62% Left Time 0:5 Rebuild => 2 is completed!! HDD is too Small!! 2 No Manual Rebuild System Info. 7 8 Compare > 2 62% Left Time 0:5 Compare => 2 is completed!! SA-DK2-U3R RAID Ready 2
Delete RAID Delete RAID 2 All data on HDD will be lost? No Yes 3 <<Warning!!>> Mode not create! RAID Alarm OFF RAID Alarm 2 OFF RAID Alarm ON 22
Rebuild Rate Rebuild Rate Fast 2 Rebuild Rate Fast Auto compare Auto compare OFF Fast/Slow/Normal Auto compare Auto compare Rebuild Rate Rebuild Rate RAID Alarm RAID Alarm Delete RAID Delete RAID 2 Auto compare OFF ON 23
Temp Management Temp Management 2 Warn temperature 60 3 Warn temperature 60 4 3 Warn tolerance 5 3 Warn tolerance 6 ESC Interval time 5 Minutes 7 Interval time 5 Minutes 24
Load Default Load Default 2 Load Default? No Yes RAID Setting RAID Alarm Rebuild Rate Auto compare Advanced Setting > Temp Management Warn temperature Warn tolerance Intervai time Elapse time Elapse time 0 Day 02:43:35 OFF Fast OFF 60 3 5 Minutes Temp Management Load Default Elapse time 25
Display Log Event Log 2 Display Log 3 00-Create RAID 0 Day 00:00:00 ESC 4 ESC Erase Log 5 No Erase Log Yes Ch/Ch2 Detected(power on) + HDD info. Ch/Ch2 Removed + HDD info. Ch/Ch2 Inserted + HDD info. Bad On Ch/Ch2 (Bad sector LBA/Length) Ch/Ch2 overheat Begin RB >2 or 2> Begin CP >2 or 2> Stop RB >2 or 2> Stop CP >2 or 2> Error RB >2 or 2> Error CP >2 or 2> Cancel RB>2 or 2> Power On Conf. Update (Change configuration settings) Erase log F/W Update One day pass Create RAID0 Create RAID Delete RAID / / / / / >2 2> >2 2> >2 2> >2 2> >2 2> >2 2> >2 2> RAID0 RAID RAID 26
<<Warning!!>> <<Warning!!>> Mode mismatch! <<Warning!!>> Degraded Array! <<Warning!!>> No Drive <<Warning!!>> <<Warning!!>> Display Log Display Log <<Warning!!>> RAID0/ Fail 27
<<Warning!!>> /2 is removed! <<Warning!!>> /2 over heat! <<Warning!!>> /2 Bad Sector! <<Warning!!>> Mode not create! 4 28
0 <<Warning!!>> Degraded Array!. 2. 3. 4. Disk detecting Please wait... 2. <<Warning!!>> Degraded Array! 0 Rebuild > 2 OK? Yes Yes/No No 2
30 8 8
3. 2. 2. 4. 3. <<Warning!!>> Degraded Array! OK? Yes Rebuild > 2 Yes/No Degraded Array! <<Warning!!>> 2.
. <<Warning!!>> Degraded Array! 2. Rebuild > 2 OK? Yes 3. No. <<Warning!!>> Degraded Array! 7 Rebuild 2 > 62% Left Time 0:5 2 3 4 5 6 System Info. RAID Setting Manual Rebuild Select Primary Disk : Rebuild 2 > continue? Yes 8 Rebuild 2 => is completed!! Compare 2 => is completed!! SA-DK2-U3R RAID Ready Compare 2 > 62% Left Time 0:5 0 32
33
34 2 2 2 2 2 2
2 2 3 3 35 3 3
4 36
SA-DK2-U3R FAX06-6633-3553 http://www.ratocsystems.com/info/privacy.html
http://www.ratocsystems.com/ Trademark of American Soybean Association C RATOC Systems, Inc. All rights reserved. Printed in Japan