Microsoft Word - HANDBOOK.doc

Chapter 1 產品認證篇 Item 1. 南非插頭及配線. 1.1 標準 : SABS1574:1992 Electric cables Flexible cords and flexible cables. SABS1661:1996. Safety of cord sets and cord extension sets 1.2 產品認証 : 1.2.1 Cable: H05VV-F 3G0.5 Certificate No. 6626/9814 Date of Issue: 2000.04.04 H05VV-F 3G0.75--Certificate No. 6626/9814 Date of Issue: 2000.04.04 H05VV-F 3G1.0 Certificate No. 6626/9814 Date of Issue: 2000.04.04 H05VV-F 3G1.5 Certificate No. 6626/9814 Date of Issue: 2000.04.04 H05VV-F 3G2.5 Certificate No. 6626/9814 Date of Issue: 2000.04.04 使用說明 :(ref: SABS1574, Annex B) 不可埋在. 不建議使用不適當的長度. ㆒般用於 0 度以, 當用於 0 度以時, 客戶需咨詢制造商. 溫度等級 :70. 額定電流 ( 最大的連續電流等級 ): 大多數情況導體截面和額定電流的關係. 0.5 mm 2 ----Single phase 3A------Three Phase 3A 0.75mm 2 ---Single phase 6A------Three Phase 6A 1.0mm 2 ----Single phase 10A-----Three Phase 10A 1.5mm 2 ----Single phase 16A------Three Phase 16A 2.5mm 2 ----Single phase 25A------Three Phase 20A 4.0mm 2 ----Single phase 32A------Three Phase 25A 如果在特別的條件使用, 如環境溫度超過 30, 超長度使用, 通風受到限制的場合, 或用於機內場合, 需要咨詢制造商. 短路時, 導體最高溫度不可超過 160. 這是基於絕緣材料固有的特性. 1.2.2 Plug: CS-004SA(6A,250V)-Certificate No. 6626/9815 Date of Issue:2000.04.04 配線 : H05VV-F 3G0.5 H05VV-F 3G1.0 H05VV-F 3G1.5 CS-006SA(16A,250V)-Certificate No. 6626/9815-Date of Issue:2000.04.04 Prepared by Tonyfeng Page:1 / Total Page:250 Issued Data: 03/06/24

配線 : H05VV-F 3G1.5 H05VV-F 3G2.5 Note: H05VV-F 3G0.5 規格未出現在 SABS1574:1992 標準. 1.3 聯絡信息 : SABS (Contact time: 3:30pm or after) CERTIFICATE STATUS Primary Contact Person: Mr. Wynand. M. Britz Tel: 27-12-428-6303 Fax: 27-12-428-7922 27-12-428-6327 Second Contact Person: Tel: 27-12-428-6405 Fax: 27-12-428-7922 E-mail: TECHNICAL Contact Person: Tel: 27-11-3162005 Fax: 27-11-3164979 brashaed@sabs.co.za Eileen Brashaw Eddie Vermaak 1.4 額定電流等級和配線長度關係. SABS1661 Amendment No.2---1997.07.21 Table1 Maximum length of cord Current rating 10A: 配線 : 1.0mm 2 1.5mm 2 2.5mm 2 4.0mm 2 Current rating 16A: 配線 : 1.5mm 2 2.5mm 2 4.0mm 2 最大長度 25m 最大長度 35m 最大長度 65m 最大長度 100m 最大長度 20m 最大長度 40m 最大長度 65m Note: The length limitation is to prevent a voltage drop of more than 5% in the cord. Prepared by Tonyfeng Page:2 / Total Page:250 Issued Data: 03/06/24

Item 2. SAA 澳洲插頭及配線. 1.1 標準 : AS/NZS 3112:2000 Approval and test specification - plugs and socket-outlets AS/NZS 3191:1996 Approval and test specification - Electric flexible cords AS/NZS 3120:1999 Approval and test specification - Cord extension sockets AS/NZS 3109.1:1996 Approval and test specification- Appliance couplers for household and similar general purposes Part 1: General requirements AS/NES 3100:1997 1.2 產品認証 : Approval and test specification- General requirements for electrical equipment. 1.2.1 Cable, Complies with AS3191:1996, Approval No. S/338: T250 2X0.1 溫度等級 75 和 90, 電壓等級 250/250V 2003.05.23 增加 Trade name: Tyco Certificate No. 10327 Date of Issue: 2003.02.19 P250 2X0.75, 2.5 溫度等級 75 和 90, 電壓等級 250/250V 2003.05.23 增加 Trade name: Tyco Certificate No. 10327 Date of Issue: 2003.02.19 F250 2X0.75 溫度等級 75 和 90, 電壓等級 250/250V 2003.05.22 增加 Trade name: Tyco Certificate No. 10327 Date of Issue: 2003.02.19 ( 述 3 款產品證書號相同 ) F440 2X0.75 溫度等級 75 和 90, 電壓等級 250/440V 2003.05.22 增加 Trade name: Tyco Certificate No. 10328 Date of Issue: 2002.03.27 R440 2X0.75, 1.0, 2.5 溫度等級 75 和 90, 電壓等級 250/440V 2003.05.22 增加 Trade name: Tyco Certificate No. 10329 Date of Issue: 2003.02.19 R440 3X0.75, 1.0, 1.5, 2.5 溫度等級 75 和 90, 電壓等級 250/440V 2003.05.22 增加 Trade name: Tyco Certificate No. 10330 Date of Issue: 2003.02.19 R440 4~5CX2.5 溫度等級 75 和 90, 電壓等級 250/440V, Ordinary duty. 此產品不屬於強制認証產品範圍, 電線表面不可印 S/338, 只可印 CS/1222/S. 見 SAA King, Brian (PIRSA)" <King.Brian@saugov.sa.gov.au> 如回复 : Prepared by Tonyfeng Page:3 / Total Page:250 Issued Data: 03/06/24

The 4 & 5 core supply flexible cords on the certificate of suitability1222 are not prescribed products and may not be marked with an approval number. The authorised mark CS/1222/S indicates to your clients that you have voluntary approval of a non-prescribed product and your product complies with the Australian standard. The flexible cords on all of the certificates of approval must be marked with your approval number. 2003.05.22 增加 Trade name: Tyco Certificate No. 1222 Date of Issue: 2003.02.19 R600 2X1.0~1.5, 3X1.0~1.5, 電壓等級 0.6/1V Felxible cord Certification No.: Q03248 by Queensland-date of issue:2003.02.27 H05RR-F 2~3C, 0.75~2.5mm^2, Rubber insulation and sheath circular flexible cord, 250/440V Ordinary duty. 2003.05.22 增加 Trade name: Tyco Certificate No. 10889 Date of Issue: 2003.04.23. H07RN-F 2~3C, 0.75~2.5mm^2, Rubber insulation and sheath circular flexible cord, 0.6/1KV heavy duty. 2003.05.23 增加 Trade name: Tyco Certificate No. 10889 Date of Issue: 2003.04.23. ( 注 : H05RN-F 和 H07RN-F 與 VDE 標準或 HD 標準的型號無任何關係 ) 編號規則列舉 : T250 F250 P250 R440 R600 T---Tinsel, 250---250/250V F---Flat P---Parallel. R---Round, 440---250/440V 600---0.6/1KV 這些編號為周氏所獨有, 並不是標準的要求. 1.2.2 Non-rewirable Plug, Complies with AS3112:2000, Approval No. S/338: SP-500 3pin, 額定電壓 250V, 額定電流 7.5A,10A,15A 配線 : 7.5A--3X0.75 10A 3X1.0, 1.5 15A 3X1.5 Plugs suitable for use with 0.6/1KV heavy duty flexible cord. 2003.05.22 增加 Trade name: Tyco Certificate No. 10339 Date of Issue: 2003.05.22 SP-500A 3pin, 額定電壓 250V, 額定電流 10A,15A, 20A Prepared by Tonyfeng Page:4 / Total Page:250 Issued Data: 03/06/24

配線 : 10A, 15A, 20A 3X2.5 或 2X2.5 Plugs suitable for use with 0.6/1KV heavy duty flexible cord. 2003.05.22 增加 Trade name: Tyco Certificate No. 10339 Date of Issue: 2003.05.22 SP-501 2pin, 額定電壓 250V, 額定電流 7.5A,10A 配線 : 7.5A--2X0.75 T250 2X0.1 P250 Light duty flat F250 Light duty flat F440 Ordinary duty flat type R440 Ordinary duty round H05RR-F Ordinary duty( 未規定相配線規 ) H07RN-F Heavy duty( 未規定相配線規 ) 10A 2X1.0 F250 Light duty flat P250 Light duty flat F440 Ordinary duty flat type R440 Ordinary duty round H05RR-F Ordinary duty( 未規定相配線規 ) H07RN-F Heavy duty( 未規定相配線規 ) Plugs suitable for use with 0.6/1KV heavy duty flexible cord. 2003.05.22 增加 Trade name: Tyco Certificate No. 10339 Date of Issue: 2003.05.22 SP-502 3pin, 額定電壓 250V, 額定電流 7.5A,10A,15A 配線 : 7.5A--3X0.75 10A 3X1.0 15A 3X1.5 Plugs suitable for use with 0.6/1KV heavy duty flexible cord. 2003.05.22 增加 Trade name: Tyco Certificate No. 10339 Date of Issue: 2003.05.22 SP-505 2pin, 額定電壓 250V, 額定電流 7.5A 配線 : 7.5A--2X0.75 Ordinary duty F440 or Light duty F250. Plugs suitable for use with 0.6/1KV heavy duty flexible cord. 2003.05.22 增加 Trade name: Tyco Prepared by Tonyfeng Page:5 / Total Page:250 Issued Data: 03/06/24

Certificate No. 10339 Date of Issue: 2003.05.22 SP-506 3pin,side entry plug 額定電壓 250V, 額定電流 7.5A, 10A 注 : 配線 : 7.5A 3X0.75 10A--3X0.75, 1.0, 3X1.5 PVC circular OD flexible cords. Note: 1. The length of 0.75mm^2 flexible cord on 10A plug not exceeding 2 meters. 2. SP-506 10A 配 3X1.0 線材可在 Todaiji 生產. Plugs suitable for use with 0.6/1KV heavy duty flexible cord. 2003.05.22 增加 Trade name: Tyco Certificate No. 10339 Date of Issue: 2003.05.22 AS/NZS3112: 2000 要求, 7.5A,10A,15A 插頭的 L 极和 N 极需要采用半絕緣銅片. 2005.04.03 之后, 不帶絕緣銅片的插頭將不能在澳洲銷售, 如果銷售則視為違法行為, 技術部暫定 2004.04.03 之后將相關產品全部進行更改,7.5A, 10A, 15A 插頭的 L 极和 N 极都是相同呎寸的銅片, 用帶半絕緣的 BL-P97658BS-1( 建通編號 - P97658BS-1) 取代 BL-SAA-10A-1( 不帶絕緣 ). 目的 : Prevent contact with live pins when a plug is only partially inserted into an outlet. The change is being introduced as an additional safety measure because electric shocks have occurred when thin conductors such as blades have contacted live pins. It has not been deemed necessary to make it a matter of urgency. (Refer to www.aeema.asn.au/docs/insulated_pins.pdf,) 1.2.3 Cord Extension Socket, Approved to AS/NZS 3120:1999 Approval No S/338. SP-503 3pin, 額定電壓 250V, 額定電流 15A 結構呎寸依据 AS/NES 3112:2000 table 3.1 配線 : 15A 3X1.5 Ordinary duty Sockets may be connected to approved V-90 flexible cords Sockets suitable for use with 0.6/1KV heavy duty flexible cords. 2003.05.22 增加 Trade name: Tyco Certificate No. 10439 Date of Issue: 2003.05.22 SP-503A 3pin, 額定電壓 250V, 額定電流 15A, 10A 結構呎寸依据 AS/NES 3112:2000 table 3.1 配線 : 10A 3X1.0 Ordinary duty Prepared by Tonyfeng Page:6 / Total Page:250 Issued Data: 03/06/24

15A 3X1.5 Ordinary duty Sockets may be connected to approved V-90 flexible cords Sockets suitable for use with 0.6/1KV heavy duty flexible cords. 2003.05.22 增加 Trade name: Tyco Certificate No. 10439 Date of Issue: 2003.05.22 1.2.4 Appliance Connector( 器具耦合器 ), Complies with AS/NZS 3109.1:1996. Approval No S/338 CE-601 10A, 250V Non-rewirable connector for class Ⅰ equipment for cold conditions. 配線 : 3X1.0 Ordinary duty circular flexible cord. Appliance connector may be connected to approved V-90 flexible cords. 2003.05.22 增加 Trade name: Tyco Certificate No. 10332 Date of Issue: 2002.03.27 CE-023( 插頭匯總沒有此型號? 用 CE-601R 編號應是錯誤的 ) CE-602 1.3 聯絡信息 : Similar to CE-601 except for side entry in lieu of rear entry. 2.5A, 250V Non-rewirable connector for class Ⅱ equipment for cold conditions. 配線 : 2X0.75 flat, ordinary duty flexible cord Appliance connector may be connected to approved V-90 flexible cords. 2003.05.22 增加 Trade name: Tyco Certificate No. 10333 Date of Issue: 2002.03.27 CE-605 0.2A, 250V~ Non-rewirable rear entry connector for class Ⅱ equipment for cold conditions. 配線 : T250 2X0.1 flexible cord 2003.05.22 增加 Trade name: Tyco Certificate No. 10600 Date of Issue: 1999.10.8 SAMPLE & QUOTATION Contact Person: Fax: 61-8-8346-7072 E-mail: CERTIFICATE Contact Person: Mr. David Gray david.gray@itacslab.com Tel: 61-8-8226-5500 Mr. Brian King Prepared by Tonyfeng Page:7 / Total Page:250 Issued Data: 03/06/24

Fax: 61-8-8226-5531 E-mail: king.brian@saugov.sa.gov.au Prepared by Tonyfeng Page:8 / Total Page:250 Issued Data: 03/06/24

Item 3. 美國 UL 認証產品 1. 術語名詞 UL Underwriters Laboratories Inc. (UL) is an independent, not-for-profit productsafety testing and certification organization. We have tested products for public safety for more than a century. Since our founding in 1894, we have held the undisputed reputation as a leader in product-safety testing and certification within the United States. Building on our household name in the United States, UL is becoming one of the most recognized, reputable conformity assessment providers in the world. Today, our services extend to helping companies achieve global acceptance, whether for an electrical device, a programmable system, or an organization's quality process. APPLICANT The company or individual who applies to UL for the certification of a component, product or system. This party contractually assumes the financial responsibility for the cost of the product investigation and Follow-Up Service, and thereby exercises the rights to information obtained as a result of the investigation. APPLICANT FILE A file of correspondence, reports and data established in the name of an Applicant for a particular product category (see also FILE NUMBER). AUTHORIZATION PAGE The first page in UL's Follow-Up Service Procedure that authorizes the use of the UL Mark. The Authorization Page contains the name, address and corporate identifier of the Applicant, Listee, and manufacturers, and the UL product category (CCN). CATEGORY CONTROL NUMBER (CCN) An alphanumeric system used to designate and identify individual product categories covered by UL's Listing Information System (LIS). CERTIFICATION MARK A generic term intended to include the UL Listing Mark, Classification Mark, Recognized Component Mark and Recognized Markings. Authorized use of a UL certification mark by a manufacturer is the manufacturer's declaration that the product was produced according to the UL requirements in effect at the time of manufacture and subject to UL's Follow- Up Service. CLASSIFICATION MARK This UL Mark consists of the following elements: the UL symbol, the word CLASSIFIED above the UL symbol, the product name (e.g., Fire Door ), a statement on or in connection with the product delineating the nature and extent (limitations) of UL's coverage, and a control number. COMPONENT A portion of a product that is subject to separate test Prepared by Tonyfeng Page:9 / Total Page:250 Issued Data: 03/06/24

performance and/or construction requirements in addition to those applied to it during the complete product investigation. A component may be either Listed, Recognized, or described as an Unlisted Component. FACTORY IDENTIFICATION A distinctive marking applied by a manufacturer to a product produced at more than one factory to identify the factory in which the product was produced. FACTORY INSPECTION Audits conducted by UL's Field Representatives at a manufacturer's facility where Listed (or other) products are produced for the purpose of factory surveillance under UL's Follow-Up Service Program (see also FOLLOW-UP SERVICE PROGRAM). FACTORY PRODUCTION INSPECTION (FPI) Similar to an IPI, except the inspection is conducted by a UL engineer for select product categories (e.g., audio/video products). FILE NUMBER An alphanumeric designation assigned by UL to identify a file for an Applicant within a specific product category. All UL Reports include the file number at the top of each page. The number shall be referenced in all correspondence with UL concerning that product category. FOLLOW-UP INSPECTION INSTRUCTIONS (FUII) Specific instructions and responsibilities applicable to UL's Follow-Up Service Program. FUIIs are generally issued when the UL Standard is included in the Procedure. FUIIs are the same for all manufacturers within a particular product category. FOLLOW-UP SERVICE PROCEDURE A document issued by UL upon determination that a product is eligible for Listing (or other). The document is loaned to a manufacturer for use by the manufacturer and UL's Field Representative. It contains requirements and other provisions and conditions regarding the UL certified product, the use of the UL Mark on the product and the conduct of Follow-Up Service. INITIAL PRODUCTION INSPECTION (IPI) Inspection of the first production run of a product to ensure that manufacturers of a Listed (or other) product are producing the product in accordance with the requirements in the FUS Procedure. LISTED PRODUCT A product that has been produced under UL's Listing and Follow-Up Service program in accordance with the terms of UL's Service Agreement and that bears the UL Listing Mark as the manufacturer's declaration that the product complies with UL's requirements. LISTEE The company or individual whose name is used on, or in conjunction with, a product and appears under a product category in one of UL's Product Directories and in a searchable, online database at UL's Intranet and Internet Prepared by Tonyfeng Page:10 / Total Page:250 Issued Data: 03/06/24

websites. The terms Classified company or Recognized company are equivalent to Listee and used in relation to the other types of UL services. LISTING MARK This UL Mark consists of four elements: the UL symbol, the word LISTED, the product name (e.g., Portable Lamp ), and a control number. LISTING MARK, COMBINATION A form of the Type L Follow-Up Service Listing Mark. It combines a manufacturer's product nameplate with the four elements of the UL Listing Mark. LISTING MARK, STANDARD For selected product categories, UL maintains a stock of standard Listing Marks. Standard Listing Marks offer the advantage of immediate availability. LISTING SERVICE A service whereby UL determines that a manufacturer has demonstrated the ability to produce a product that complies with UL's requirements with respect to reasonably foreseeable risks associated with the product. As part of the service, by the terms of UL's Service Agreement, UL authorizes the manufacturer to use the UL Listing Mark on products that comply with UL's requirements and establishes Follow-Up Service conducted by UL as a check of the means the manufacturer exercises to determine compliance with UL's requirements. RECOGNITION SERVICE A service whereby UL determines that a manufacturer has demonstrated the ability to produce a component for use in an end product that complies with UL's requirements. It takes into account the performance and constructional characteristics of such end product insofar as this can be determined and the areas that require additional consideration for application of the component to the product. By the terms of UL's Service Agreement, UL authorizes the manufacturer to use the Recognized Marking and other required markings on components that comply with UL's requirements and establishes a Follow-Up Service conducted by UL as a check of the means the manufacturer exercises to determine compliance with UL's requirements. RECOGNIZED COMPONENT A part or subassembly covered under UL's Recognition Service and intended for factory installation in Listed (or other) products. Recognized Components are incomplete in certain construction features or restricted in performance capabilities and not intended for separate installation in the field, rather they are intended for use as components of incomplete equipment submitted for investigation by UL. Final acceptance of the component in the complete equipment is dependent upon its installation and use in accordance with all applicable use conditions and ratings Prepared by Tonyfeng Page:11 / Total Page:250 Issued Data: 03/06/24

noted (1) in the component report issued by UL, (2) in the Guide Information and (3) in the individual client's Recognized Component Information Page. RECOGNIZED MARKING The marking that a component manufacturer is authorized to apply to a component manufactured under UL's Recognition Service. It consists of the Recognized company identification/name and catalog number, model number or other designation. The UL Recognized Component Mark (UR) may be used in conjunction with the Recognized Marking. SP VOLUME Special volume of a Procedure that describes one or more Unlisted Components for use in an Applicant's basic products SPECIAL SERVICES An agency, association, group, company or individual may initiate a project for special services which does not result in Listing (or other) and Follow-Up Service. Such requests may include, but are not limited to: adjunct testing, evaluation or inspection that is supplemental to but not essentially a part of Listing (or other); one-time testing, evaluation or inspection using criteria developed by a federal, state or local authority or to satisfy product performance and/or installation requirements specified in regulations or standards of others; developing requirements, tests or other data for use by other Applicants in establishing Listing (or other) and Follow-Up Service on a product; research investigations; or work for a government agency TYPE L SERVICE A form of Follow-Up Service applicable to products or systems for which UL conducts FUS factory inspections on the basis of the number of UL certification marks being used by a manufacturer on a product or system. TYPE R SERVICE A form of Follow-Up Service applicable to products or systems for which UL conducts FUS factory inspections on a periodic calendar basis with a minimum of four inspections per year. UNLISTED COMPONENT A component used in a Listed (or other) product which is separately investigated for a product manufacturer as a component of the complete product using appropriate requirements applicable for Listing (or other) of the part, but for which no published recognition is requested. VARIATION NOTICE (VN) A document used by UL's Field Operations to record observed differences between a product or manufacturing process and a description in a FUS Procedure. 2. UL 產品概況因种類較多, 待后續補充 3. 申請者資料只選擇部分列出 Prepared by Tonyfeng Page:12 / Total Page:250 Issued Data: 03/06/24

File No.: 085350-0-000, 088617-0-000 Submittor: Factories: Chau s Electrical Co., Ltd. F1: Chau s Electrical Co., Ltd.(Dong Guan) F2: Chau s Electrical Co., Ltd.(Shanghai) 4. 周氏擁用的 UL File 清單. 周氏有 17 個 UL File No. 分別是 : 1) AVLV2.E114082 Appliance Wiring Material-Component 2) AVLV8.E114082 Appliance Wiring Material Certified for Canada-Component. 3) DUXR.E139562 Communication Circuit Accessories 4) ELBZ.E124162 Cord Sets and Power Supply Cords. 5) ELBZ7.E124162 Cord Sets and Power Supply Cords Certified for Canada. 6) YDPU.E193824 Extruded Tubing, Electrical-Component 7) ZIPR.E114236 Fixture Wire. 8) ZJCZ.E114235 Flexible Cord. 9) ZJCZ7.E114235 Flexible Cord Certified for Canada. 10) QMFZ2.E213359 Plastics-Component. 11) QMTT2.E191227 Polymeric Material for Use in Wire and Cable-Component. 12) ZPFW8.E124233 Wiring Harness Certified for Canada-Component. 13) OBMW2.E176849 Magnet Wire-Component.( 華藝 ) C/O DM Technology & Energy 14) DUXR2.E139562 Communication Circuit Accessories-Component. C/O DM Technology & Energy Co. 15) PGIS2.MH18785 Prepared by Tonyfeng Page:13 / Total Page:250 Issued Data: 03/06/24

Marking and Labeling Systems, Limited Use-Component C/O DM Technology & Energy Co. 16) ZKLU2.E146818 Processed Wire-Component C/O DM Technology & Energy Co. 17) ZPFW2.E124233 Wiring Harness-Component C/O DM Technology & Energy Co. 5. UL 認証產品. 5.1 File No. E114082(AVLV2, AVLV8 ), Vol.2 的產品 Follow-up Service Procedure Issued 1989.08.15, Revised: 1997.08.15 Type: L Manufacturer: Chau s Electrical Co., Ltd.(Guangdong) Applicant: Recognized: Chau s Electrical Co., Ltd.(Hong Kong) Same as Applicant. AVLV2---Appliance Wiring Material-Component AVLV8---Appliance Wiring Material Certified for Canada-Component. 5.1.1 USL Single Conductor Thermoplastic (Section1) 1) 1007(F), 80, 300V 認証時間 89.08.15, 未測試, 用 2592 代替測試. 2) 1015(F), 105, 600V 認証時間 90.03.05, 未測試, 因 E114235 有類似產品. Oil resistant insulation: 60C maximum. 3) 1056(F), 105, 600V 認証時間 99.11.24, 未測試, 因類似 1015( Reported 90.03.05) Oil resistant insulation: 60C maximum. 4) 1061(F), 80, 300V 認証時間 92.01.22. 5) 1095, 80, 300V 認証時間 92.09.18, 未測試, 因類似 1561( Reported 92.01.22), 當時只花 500USD 即可完成認証. 6) 1185, 80, 300V 認証時間 92.01.22, 未測試, 因當時有類似產品測試 (1365, 2464, 2592) 7) 1195(F) 認証時間 92.01.22, 未測試, 因當時有類似產品測試 (1365, 2464, 2592) 8) 1208(F) 認証時間 92.01.22, 未測試, 因當時有類似產品測試 (1365, 2464, 2592) 9) 1285, 105, 125V Prepared by Tonyfeng Page:14 / Total Page:250 Issued Data: 03/06/24

認証時間 95.05.08. 10) 1316(F),105C, 600V 認証時間 96.04.17. 与 1452 ㆒起認證費用 3000USD. Oil resistant insulation 60C maximum 11) 1330, 200, 600V(Fluorinated Ethylene Propylene insulated, 周氏不能生產 ) 認証時間 97.08.15. 12) 1331, 150, 600V(Fluorinated Ethylene Propylene insulated, 周氏不能生產 ) 認証時間 97.08.15. 13) 1332(F), 200, 600V(Fluorinated Ethylene Propylene insulated, 周氏不能生產 ) 認証時間 97.08.15. 14) 1333(F), 150, 600V(Fluorinated Ethylene Propylene insulated, 周氏不能生產 ) 認証時間 97.08.15. 15) 1365, 60, 300V 認証時間 92.01.22 16) 1452(F), 90, 300V(Nylon covering, 周氏不能生產 ) 認証時間 96.04.17. Oil resistant insulation 60C maximum 17) 1478, 60, 30V 認証時間 92.01.22, 未測試, 因有類似產品 2464(Report dated 90.12.18) 18) 1497, 80C, 300V 認証時間 92.01.22, 未測試. 19) 1500, 105, 600V 認証時間 92.01.22, 未測試. 20) 1503(F), 80C, 150V 認証時間 92.01.22. 21) 1533(F), 80, VNS 認証時間 92.01.22, 未測試, 因當時間有類似產品測試 (1365, 2464, 2592) Jacket 15mils minimum average, 13mils any point. 22) 1561(F), 80, VNS 認証時間 92.01.22, 未測試, 因當時間有類似產品測試 (1365, 2464, 2592) Insulation 12 mils minimum average, 10 mils any point. Jacket 15mils minimum average, 13mils any point. 23) 1569, 105,300V 認証時間 98.01.20, 未測試, 因 E114082 有 CAWM 類似產品 (Reported 97.08.16). 24) 1571(F), 80, 30V Prepared by Tonyfeng Page:15 / Total Page:250 Issued Data: 03/06/24

認証時間 91.06.26, 未測試, 因類似 1007. Insulation PVC only. 25) 1672, 105, 300V 認証時間 91.11.06, 未測試, 因類似 2464. 26) 1777(F), 80C, 300V 認証時間 92.01.22, 未測試, 因當時間有類似產品測試 (1365, 2464, 2592) 注 : 1007, 1015, 1061, 1497, 1500 最早認証于 88.06.07, 當時周氏是松普的㆒個制造商, UL File No. E89980. 5.1.2 USL Multi-conductor Thermoplastic (Section2) 1) 2010, 90, 300V 認証時間 91.09.23, 未測試, 因類似 E114235 的 SPT-2 (Report dated89.06.15) 2) 2464, 80, 300V 認証時間 89.03.23. 3) 2468(F), 80, 300V 認証時間 89.03.23, 未測試, 因當時間有類似產品測試 (1365, 2464, 2592) Oil resistant insulation 60C maximum. 4) 2480, 80, 300V 認証時間 94.06.10, 未測試, 因類似 2678(Report dated 94.05.11) 5) 2547(F), 80, VNS 認証時間 92.01.22, 未測試, 因當時間有類似產品測試 (1365, 2464, 2592) Jacket 15mils minimum average, 13mils any point. 6) 2562(F), 80, 300V 認証時間 92.01.22, 未測試, 因當時間有類似產品測試 (1365, 2464, 2592) Insulation 12mils minimum average, 10mils any point. Jacket 15mils minimum average, 13mils any point. 7) 2592(F), 80C, VNS 認証時間 89.03.23. 8) 2651(F), 105, 300V 認証時間 94.06.10, 未測試, 因類似 2678(Report dated 94.05.11) 9) 2678(F), 105, 150V 認証時間 94.05.11. 10) 2733, 105, 600V 認証時間 92.04.22. 11) 2851, 80, 30V 認証時間 91.06.26, 未測試, 因已有類似產品. 12) 2919, 80, 30V 認証時間 92.01.22, 未測試, 因已有類似產品 2464. Prepared by Tonyfeng Page:16 / Total Page:250 Issued Data: 03/06/24

13) 2969, 80, 30V 認証時間 95.01.30, 未測試, 因已有類似產品 2464,2919(Report dated 90.06.29). 12) 2990, 80, 30V 認証時間 95.01.30, 未測試, 因已有類似產品 2464,2919(Report dated 92.01.22). 13) 20097(F), 60, 150V 認証時間 92.01.22. Insulation: Polyester Elastomer Hytrel #7246. 14) 20251(F), 60, 150V 認証時間 92.01.22. Insulation: 9mils minimum average thickness, 7mils minimum at any point. 15) 20288, 105C, 300V 認証時間 96.03.26. 16) 20394, 60C, 300V 認証時間 92.01.22. 17) 20404(F), 105, 300V 認証時間 91.12.17, 未測試, 因 E114235 已有類似產品 SPT-3 Insulation material: Cords must use any of the compounds listed in the latest edition of UL62, 1072, 1277, and 1569 Bulletin entitled, List of Acceptable Sunlight-Resistant PVC Compounds for use as Insulation and/or Jacketing Materials on Listed Outdoor Flexible Cords and Christmas-Tree Wire and Cords, Medium Voltage Cable, power and Control Tray Cable, and Metal-Clad Cable 18) 20707, 60C, 300V 認証時間 98.01.06, 未測試, 因已有類似產品 20394, 認証費用 400USD. 5.1.3 USL Single Conductor Thermoset (Section3) 1) 3122(F), 200, 300V (Silicone rubber insulated) 認証時間 99.11.30, 未測試, 因已有類似產品 CAWM 200,300V(Report dated 97.08.16) Conductors: Tinned only. 5.1.4 CNL Appliance Wiring Material (Section6) 1) FEP Insulated Single C22.2 No.210.2 Class: I (Internal use) Group:A (Not subject to mechanical abuse) Voltage Rating: 30, 150, 300, 600V Temperature: 150, 200C Prepared by Tonyfeng Page:17 / Total Page:250 Issued Data: 03/06/24

Flame Rating: Conductor: Insulation Thickness: FT1, FT2 Solid or stranded. 30~10AWG, Minimum average thickness: 19 mils, Minimum thickness at any point: 17mils. 2) PVC Insulated Single C22.2 No.210.2 Class: I (Internal use) Group:A (Not subject to mechanical abuse) Voltage Rating: 30, 150, 300V Temperature: Flame Rating: Conductor: Insulation Thickness: 60, 80, 90, 105C FT1, FT2 Solid or stranded. 30~10AWG, Minimum average thickness: 15 mils, Minimum thickness at any point: 13mils. 3) Silicone Rubber Insulated Single C22.2 No.210.2 Class: I (Internal use) Group:A (Not subject to mechanical abuse) Voltage Rating: 30, 150, 300V Temperature: Flame Rating: Conductor: 200C FT2 Insulation Thickness: Solid or stranded, Tinned only. 26~16AWG, Minimum average thickness: 16 mils, Minimum thickness at any point: 14mils. 5.2 File No. E139562(DUXR) 的產品 Communication Circuit Accessories 1) Telephone handset cord Model CC Series 2) Telephone line cord Model CS Series 5.3 File No. E139562(DUXR2) 的產品 Modular telephone jacks: Models Series 616, 623, 641. The difference between each model is the configuration of housing and number of possible conductor pins employed. These units are intended for indoor use only on the equipment side of Listed Prepared by Tonyfeng Page:18 / Total Page:250 Issued Data: 03/06/24

telephone protector. 5.4 File No. E124162 的產品 5.4.1 E124162(ELBZ, ELBZ7) 文件結構 : Follow-up Service Procedure Issued 1989.07.10, Revised: 2003.02.14 E124162 Vol.1 Index A Issued 1989.07.10, Revised: 1993.12.10 E124162 Vol.1 App. A Issued 1989.07.10, Revised: 1996.03.04 E124162 Vol.1 Sec. Gen. Page.1 Issued 1989.07.10, Revised: 2000.08.15 E124162 Vol.1 Sec. Gen. Page.2 Issued 1989.07.10, Revised: 1995.08.29 E124162 Vol.1 Sec.1 Issued 1989.07.10, Revised: 1995.08.14 Product Covered: Cord Sets---General Use. E124162 Vol.1 Sec.2 Issued 1995.03.31, Revised 1996.08.01 Product Covered: Cord Sets---Outdoor Use E124162 Vol.1 Sec.6 Issued 1989.07.17. Product Covered: Cord Sets---Outdoor Use E124162 Vol.1 Sec.11 Issued 1989.07.24, Revised 1993.12.10 Product Covered: Non-detachable Power Supply Cords---Special Use E124162 Vol.1 Sec.12 Issued 1989.07.25 Product Covered: Detachable Power Supply Cords---General Use. E124162SP Vol.1 Index Page.1 Issued:1989.08.01, Revised:2000.10.24 Attachment Plug Caps. E124162SP Vol.1 Index Page.2 Issued:1989.08.01, Revised:2002.07.24 Cord Connector Bodies, Current Taps. E124162SP Vol.1 Sec. Gen. Issued:1989.08.01, Revised:1997.05.22 E124162SP Vol.1 Sec.1 Page.1 Issued:1989.08.01, Revised:2003.06.04 E124162SP Vol.1 Sec.1 Page.2 Issued:1989.08.01, Revised:2002.10.01 E124162SP Vol.1 Sec.1 Page.4 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-002, SP-002P, CS-024 FIG.1(R88-9502) Ill.1 E124162SP Vol.1 Sec.1 Page.5 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-020, SP-020P. FIG.2(R87-10425) Ill.26 E124162SP Vol.1 Sec.1 Page.6 Issued:1989.08.01, Revised:2002.11.12 Cat No.: Figure: Illustration: SP-021, SP-021P, SP-021APS FIG.3(R88-9056) Ill.3, Ill.3A, Ill.4 E124162SP Vol.1 Sec.1 Page.7 Issued:1989.08.01, Revised:2001.01.03 Prepared by Tonyfeng Page:19 / Total Page:250 Issued Data: 03/06/24

Cat No.: Figure: Illustration: SP-022. FIG.4(R87-10566) Ill.5 E124162SP Vol.1 Sec.1 Page.8 Issued:1989.08.01, Revised:2003.05.21 Cat No.: Figure: Illustration: SP-021A, SP-021AP FIG.5(R88-9058) Ill.6 E124162SP Vol.1 Sec.1 Page.9 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-033, SP-033P FIG.6(R89-2684) Ill.8 E124162SP Vol.1 Sec.1 Page.10, 10A Issued:1989.08.01, Revised:2002.10.01 Cat No.: Figure: Illustration: SP-035, SP-035A, SP-080, SP-043 FIG.7(R88-9055) Ill.10, Ill.36, Ill.11, Ill.31 E124162SP Vol.1 Sec.1 Page.11 Issued:1989.08.01, Revised:2002.03.26 Cat No.: Figure: Illustration: SP-022A FIG.8(R88-9057) Ill.12 E124162SP Vol.1 Sec.1 Page.12 Issued:1989.08.01, Revised:2003.06.04 Cat No.: Figure: Illustration: SP-037, SP-057, SP-038, SP-039, SP-040 FIG.9(R88-9053) Ill.27, Ill.13 E124162SP Vol.1 Sec.1 Page.13 Issued:1989.08.01, Revised:2002.10.01 Cat No.: Figure: Illustration: SP-003, SP-056 FIG.10(R89-2683) Ill.28 E124162SP Vol.1 Sec.1 Page.14 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-015P FIG.11(R89-6003) Ill.14 E124162SP Vol.1 Sec.1 Page.15 Issued:1989.08.01, Revised:2002.10.01 Cat No.: Figure: Illustration: SP-007, SP-008, SP-052 FIG.12(R89-6004) Ill.17, Ill.18, Ill.21 E124162SP Vol.1 Sec.1 Page.16, 16A Issued:1989.08.01, Revised:2002.10.01 Cat No.: Figure: SP-010, SP-009, SP-042 FIG.13(R89-6005) Prepared by Tonyfeng Page:20 / Total Page:250 Issued Data: 03/06/24

Illustration: Ill.29, Ill.15, Ill.22 E124162SP Vol.1 Sec.1 Page.17 Issued:1989.08.01, Revised:2003.02.26 Cat No.: Figure: Illustration: SP-120, SP-120P FIG.14(R91-7777) Ill.19, Ill.35 E124162SP Vol.1 Sec.1 Page.18 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-051. FIG.15(R97-5657) Ill.24, Ill.23, Ill.30 E124162SP Vol.1 Sec.1 Page.19 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-050. FIG.16(R97-5657) Ill.25, Ill.23, Ill.30 E124162SP Vol.1 Sec.1 Page.20 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-003A FIG.17(R98-5148) Ill.32 E124162SP Vol.1 Sec.1 Page.21 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-004 FIG.18(R98-5147) Ill.33 E124162SP Vol.1 Sec.1 Page.22 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-005 FIG.19(R98-5146) Ill.34 E124162SP Vol.1 Sec.1 Page.23 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-060, SP-061, SP-062, SP-065, SP-066 FIG.20(R00-15166) Ill.35, Ill.36, Ill.37, Ill.38, Ill.38A, Ill.39, E124162SP Vol.1 Sec.1 Page.24 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-095 FIG.21(R00-21442) Ill.40, Ill.40A, Ill.40B, Ill.40C E124162SP Vol.1 Sec.1 Page.25 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-090 FIG.22(R00-21443) Ill.35, Ill.41A E124162SP Vol.1 Sec.1 Page.26 Issued:1989.08.01, Revised:2001.01.03 Prepared by Tonyfeng Page:21 / Total Page:250 Issued Data: 03/06/24

Cat No.: Figure: Illustration: SP-091 FIG.23(R00-21444) Ill.35, Ill.42A, Ill.42B E124162SP Vol.1 Sec.1 Page.27 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-094 FIG.24(R00-21441) Ill.35, Ill.42B E124162SP Vol.1 Sec.1 Page.28 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-092 FIG.25(R00-15167) Ill.35, Ill.40A, Ill.40B, Ill.40C, Ill.38B E124162SP Vol.1 Sec.1 Page.29 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-093 FIG.26(R00-15165) Ill.35, Ill.40A, Ill.40B, Ill.40C, Ill.38B E124162SP Vol.1 Sec.1 Page.30 Issued:1989.08.01, Revised:2001.01.03 Cat No.: Figure: Illustration: CS-027 FIG.27(R00-53464) Ill.46 E124162SP Vol.1 Sec.1 Page.31 Issued:1989.08.01, Revised:2001.12.20 Cat No.: Figure: Illustration: SP-017 FIG.28(R01-7250) Ill.47, Ill.48, Ill.49 E124162SP Vol.1 Sec.2 Page.1 Issued:1989.08.02, Revised:2002.07.24 Cord Connector Bodies. E124162SP Vol.1 Sec.2 Page.3 Issued:1989.08.02, Revised:2001.01.23 Cat No.: Figure: Illustration: SP-012 FIG.1(R87-10428) Ill.5 E124162SP Vol.1 Sec.2 Page.4 Issued:1989.08.02, Revised:2002.03.26 Cat No.: Figure: Illustration: SP-013 FIG.2(R87-10429) Ill.5, Ill.8 E124162SP Vol.1 Sec.2 Page.5 Issued:1989.08.02, Revised:2002.03.26 Cat No.: Figure: Illustration: SP-016, SP-016X, SP-016B, SP-016C, SP-016D, SP-016E FIG.3(R87-10430) Ill.4, Ill.4A, Ill.5, Ill.11, Ill.12, Ill.13 E124162SP Vol.1 Sec.2 Page.6 Issued:1989.08.02, Revised:2002.03.26 Prepared by Tonyfeng Page:22 / Total Page:250 Issued Data: 03/06/24

Cat No.: Figure: Illustration: SP-026 FIG.4(R87-10431) Ill.5 E124162SP Vol.1 Sec.2 Page.7 Issued:1989.08.02, Revised:2001.09.27 Cat No.: Figure: Illustration: SP-024 FIG.5(R88-9054) Ill.1, Ill.6 E124162SP Vol.1 Sec.2 Page.8 Issued:1989.08.02, Revised:2001.10.10 Cat No.: Figure: Illustration: SP-023, SP-023R, SP-023L, SP-023RM FIG.6(R88-9050) Ill.2, Ill.2A, Ill.2B, Ill.2C, Ill.6 E124162SP Vol.1 Sec.2 Page.9 Issued:1989.08.02, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-011 FIG.7(R89-3670) Ill.3 E124162SP Vol.1 Sec.2 Page.10 Issued:1989.08.02, Revised:2002.03.26 Cat No.: Figure: Illustration: SP-605 FIG.8(98-2661) Ill.7, Ill.5 E124162SP Vol.1 Sec.2 Page.11 Issued:1989.08.02, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-013B, SP-013R FIG.9(R98-5145) Ill.9, Ill.10, Ill.5 E124162SP Vol.1 Sec.2 Page.12 Issued:1989.08.02, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-372 FIG.10(R99-3257) Ill.14, Ill.5 E124162SP Vol.1 Sec.2 Page.13 Issued:1989.08.02, Revised:2001.12.20 Cat No.: Figure: Illustration: SP-016H FIG.11(R01-7248) Ill.15, Ill.16 E124162SP Vol.1 Sec.2 Page.14 Issued:1989.08.02, Revised:2002.07.24 Cat No.: Figure: Illustration: SP-041 FIG.12(R02-21014) Ill.17, Ill.5 E124162SP Vol.1 Sec.3 Page.1 Issued:1989.08.03, Revised:1999.10.22 Cord Connector Body.(NEMA Configuration) E124162SP Vol.1 Sec.3 Page.2 Issued:1989.08.03, Revised:2002.07.24 Prepared by Tonyfeng Page:23 / Total Page:250 Issued Data: 03/06/24

Cat No.: Figure: Illustration: SP-019 FIG.1(R88-7623) Ill.1, Ill.5 E124162SP Vol.1 Sec.3 Page.3 Issued:1989.08.03, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-032, SP-054 FIG.2(R89-4153) Ill.2, Ill.2A, Ill.2B, Ill.11 E124162SP Vol.1 Sec.3 Page.4 Issued:1989.08.03, Revised:2003.03.24 Cat No.: Figure: Illustration: SP-034, SP-044, SP-058, SP-081 FIG.3(R89-3673) Ill.4, Ill.6, Ill.6A, Ill.6B, Ill.6C, Ill.7, Ill.8 E124162SP Vol.1 Sec.3 Page.5 Issued:1989.08.03, Revised:2002.07.24 Cat No.: Figure: Illustration: SP-018 FIG.4(R89-3672) Ill.6, Ill.6A, Ill.6B, Ill.6C. E124162SP Vol.1 Sec.3 Page.6 Issued:1989.08.03, Revised:2001.01.03 Cat No.: Figure: Illustration: SP-053, SP-053L FIG.5(R98-5144) Ill.9, Ill.12, Ill.13 E124162SP Vol.1 Sec.3 Page.7 Issued:1989.08.03, Revised:2002.11.25 Cat No.: Figure: Illustration: SP-055 5.4.2 E124162 PROCEDURE Type: L FIG.6(R97-2178) Ill.10, Ill.6, Ill.6A, Ill.6B, Ill.6C, Ill.7 ELBZ --- Cord Sets and Power Supply Cords. ELBZ7---Cord Sets and Power Supply Cords Certified for Canada. Special Instructions: Field Representative: 1) When performing Follow-up Service Inspection on the Cord Sets and Power Supply Cords covered by this Procedure, please have available Procedure, Volumes E124162SP, which cover Unlisted Components for use with these Cord Sets and Power Supply Cords. 2) The molded-on and factory assembled Cord Connector Bodies and Attachment Plug Caps described in this Procedure are not to be marked with any current rating except that the load fitting of a cord set or detachable power supply cord may be marked with a Current rating if the flexible cord, and any through cord switch used thereon, have an ampacity(current rating) equal to or greater than the current rating of the load fitting. Product Covered: Cord Sets and Power Supply Cords. Prepared by Tonyfeng Page:24 / Total Page:250 Issued Data: 03/06/24

General Construction: Products bearing Listing Marks shall comply with the Standard of UL for Cord Sets and Power Supply Cords(UL817), the Canadian National Standard for Cord Sets and Power Supply Cords(C22.2 No. 21-95) where applicable and with the applicable description, if any, given elsewhere in this Volume or in File E124162SP, Volume 1. Flexible cord intended for use with C-UL Listed Cord Sets and Power Supply Cords shall be UL Listed and meet the requirements of CSA C22.2 No. 21-95. 5.4.3 E124162SP Vol.1 Sec. Gen. 的內容 Issued:1989.08.01, Revised:1995.09.25 Product Covered: Marking: Spacing: Unlisted Component---Attachment Plug Caps, Cord Connector Bodies and Current Taps. Manufacturer s name and/or E124162, Catalog number are provided. The electrical rating is provided only where indicated in the individual sections of this file. For fittings rated 250V and less, minimum 3/64 in.(1.2mm), for fittings rated 251 V through 600V, minimum 1/8 in.(3.2mm) between uninsulated live-metal parts of opposite polarity and between uninsulated live-metal parts and dead-metal parts. Construction: Specified in UL817. 5.4.4 Attachment Plug Caps Attachment Plug Caps and Current Tabs contain in E124162SP Vol.1 Section 1. Note to inspector: Note: Inspector shall verify that blades described in Figs are crimped and soldered unless specifically described as a R/C blades (AXNU2) including manufacturers name and catalog number. Inspector shall verify that soldering shall flow through the crimp area and that solder is shiny and smooth, denoting a proper solder joint. This requirement only applies to blades used on No.18 AWG through N0. 10AWG type flexible cord. If blade is R/C but not for the AWG being used, the product as described is acceptable if additionally soldered. Engineering Considerations: USL---Indicates investigation to United States UL817. Prepared by Tonyfeng Page:25 / Total Page:250 Issued Data: 03/06/24

CNL---Indicates investigation to Canadian National Standard C22.2 No.21-95 Conditions of acceptability; These devices have been evaluated when molded on the specific conductor size and type specified in the procedure. Use with any other size of or type cord may require additional evaluation. These fittings should be used only within their electrical rating. 5.4.4.1 NEMA Configuration (Section 1). 1) SP-002, -002P Issued: 1989.08.01, Revised: 2001.01.03 Configuration: 1-15P Cord: Electrical: C-UL: Cord type: 18, 16AWG 10, 13A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: SPT-1, NISPT-1, SJT, SPT-2, NISPT-2 16AWG/2C: SJT, SPT-2, NISPT-2 Conditions of Acceptability: Marking: 2) SP-003 Be only used on special use power supply cords due to large face dimensions. A special-use non-detachable power supply cord intended for use with a toy transformer or electric toy shall be marked For use with toy transformers or electric toys or an equivalent statement. Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 18, 16, 14, 12AWG 10, 13, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SVT, SJT, ST 16AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, ST 14AWG/3C: SPT-3, SJT, ST Prepared by Tonyfeng Page:26 / Total Page:250 Issued Data: 03/06/24

3) SP-003A 12AWG/3C: SJT, ST Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 4) SP-004 18, 16, 14, 12AWG 10, 13, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-2, NISPT-2, SPT-3, SVT, SJT, ST 16AWG/3C: SPT-2, NISPT-2, SPT-3,SJT, ST 14AWG/3C: SPT-3, SJT, ST 12AWG/3C: SJT, ST Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 5) SP-005 18, 16, 14AWG 10, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-2, NISPT-2, SPT-3, SVT, SJT, ST 16AWG/3C: SPT-2, NISPT-2, SPT-3,SJT, ST 14AWG/3C: SPT-3, SJT, ST Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 18, 16, 14AWG 10, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: Prepared by Tonyfeng Page:27 / Total Page:250 Issued Data: 03/06/24

6) SP-007 SPT-2, NISPT-2, SPT-3, SJT, ST 16AWG/3C: SPT-2, NISPT-2, SPT-3,SJT, ST 14AWG/3C: SPT-3, SJT, ST Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 7) SP-008 18, 16, 14AWG 10, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SJT, SJTW, ST 16AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, SJTW, ST 14AWG/3C: SPT-3, SJT, SJTW, ST Configuration: 6-15P Cord: Electrical: C-UL: Cord type: 8) SP-009 18, 16, 14AWG 10, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SJT, SJTW, ST 16AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, SJTW, ST 14AWG/3C: SPT-3, SJT, SJTW, ST Configuration: 6-20P Cord: Electrical: C-UL: Cord type: 18, 16, 14, 12, 10AWG 10, 13, 15, 18, 20A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: Prepared by Tonyfeng Page:28 / Total Page:250 Issued Data: 03/06/24

9) SP-010 18AWG/3C: SPT-3, SJT, SJOW, SJOOW, ST. 16AWG/3C: SPT-3, SJT, SJOW, SJOOW, ST. 14AWG/3C: SPT-3, SJT, SJOW, SJOOW, ST. 12AWG/3C: SPT-3, SJTW, SJE, SJEO, SJOW, SJOOW, SJT, ST. 10AWG/3C: SJTW, SJE, SJEO, SJOW, SJOOW, SJT, ST. Configuration: 5-20P Cord: Electrical: C-UL: Cord type: 18, 16, 14, 12, 10AWG 10, 13, 15, 20, 20A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-3, SJT, SJOW, SJOOW, ST. 16AWG/3C: SPT-3, SJT, SJOW, SJOOW, ST. 14AWG/3C: SPT-3, SJT, SJOW, SJOOW, ST. 12AWG/3C: SPT-3, SJTW, SJE, SJEO, SJOW, SJOOW, SJT, ST. 10AWG/3C: 10) SP-020, SP-020P SJTW, SJE, SJEO, SJOW, SJOOW, SJT, ST. Configuration: 1-15P Cord: Electrical: C-UL: Cord type: 20, 18, 16AWG 3, 10, 13A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 20AWG/2C: XT 18AWG/2C: SPT-1, NISPT-1, SPT-2, NISPT-2, HPN Prepared by Tonyfeng Page:29 / Total Page:250 Issued Data: 03/06/24

16AWG/2C: 11) SP-021, SP-021P SPT-2, NISPT-2, HPN Configuration: 1-15P Cord: Electrical: C-UL: Cord type: 27, 18, 16, 14AWG 1.5, 10, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 27AWG/2C: TST, TPT 18AWG/2C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SV, SVT, SJ, SJT, SJOW, SJOOW, SJTW, HPN 16AWG/2C: SPT-2, NISPT-2, SPT-3, SV, SVT, SJ, SJT, SJOW, SJOOW, SJTW, HPN 14AWG/2C: 12) SP-021APS. SPT-3,SJ, SJT, SJOW, SJOOW, SJTW Configuration: 1-15P Cord: Electrical: C-UL: Cord type: 27, 18, 17, 16, 14AWG 1.5, 10, 12, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 27AWG/2C: TST, TPT 18AWG/2C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SVT, SJEOW, SJTOW, SJOW, SJOOW, SJTW, SJT, HPN 17AWG/2C: SV, SVT 16AWG/2C: SPT-2, NISPT-2, SPT-3, SJEOW, SJTOW, SJOW, SJOOW, SJTW, SJT, SVT, HPN 14AWG/2C: SPT-3, SJT, SJEOW, SJOW, SJOOW, SJTOW, SJTW Prepared by Tonyfeng Page:30 / Total Page:250 Issued Data: 03/06/24

13) SP-021A, SP-021AP. Configuration: 1-15P Cord: Electrical: C-UL: Cord type: 14) SP-022 18, 17, 16, 14AWG 10, 12, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SVT, SJEOW, SJTOW, SJOW, SJOOW, SJTW, SJT, HPN 17AWG/2C: SVT 16AWG/2C: SPT-2, NISPT-2, SPT-3, SJEOW, SJTOW, SJOW, SJOOW, SJTW, SJT, SVT, HPN 14AWG/2C: SPT-3, SJT, SJEOW, SJOW, SJOOW, SJTOW, SJTW Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 15) SP-022A 18, 16, 14AWG 10, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SVT, SJT 16AWG/3C: SPT-2, NISPT-2, SPT-3, SJT. 14AWG/3C: SPT-3, SJT Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 18, 16AWG 10, 13A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: Prepared by Tonyfeng Page:31 / Total Page:250 Issued Data: 03/06/24

SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, STW, SVT, SJT, SJTW. 16AWG/3C: 16) SP-033, -033P SPT-2, NISPT-2, SPT-3, STW, SJT, SJTW. Configuration: 1-15P Cord: Electrical: C-UL: Cord type: 27, 20, 18, 16AWG 1.5, 3, 10, 13A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 27AWG/2C: TPT 20AWG/2C: XT 18AWG/2C: SPT-1, NISPT-1, SPT-2, NISPT-2, HPN. 16AWG/2C: 17) SP-035, SP-035A SPT-2, NISPT-2, HPN. Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 18, 16, 14, 12AWG 10, 13, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-1, NISPT-1, SJTW, SJEOW, SJOW, SJOOW, STW, SJTOW, SJEO, SJTO, HPN, SJE, SPT-2, NISPT-2, SPT-3, SVT, SJT, SJ. 16AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, STW, SJEW, SJTO, SJOW, SJOOW, SJEO, HPN, SJE, SJTOW, SJ, SJTW. 14AWG/3C: SJT, SJEOW, STW, SJTO, SJOW, SJ, SJOOW, SPT-3, SJEO, SJTOW, HPN, SJE, SJTW. 12AWG/3C: SJT, SJ, SPT-3, SJEO, SJTO, SJEOW, SJOW, SJOOW, SJTW, STW, SJTOW, SJTW. Prepared by Tonyfeng Page:32 / Total Page:250 Issued Data: 03/06/24

18) SP-037 Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 19) SP-038 18, 16, 14, 12, 10AWG 10, 13, 15, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-3, SJEO, SJTO, SJOW, SJOOW, SJT, STW, SJTW, STOW, ST. 16AWG/3C: SPT-3, SJEO, SJTO, SJOW, SJOOW, SJT, STW, SJTW, STOW, ST. 14AWG/3C: SPT-3, SJEO, SJTO, SJOW, SJOOW, SJT, STW, SJTW, STOW, ST. 12AWG/3C: SPT-3, SJEO,STW, SJTW, SJOW, SJOOW, SJTO, SJT, STOW, ST. 10AWG/3C: SPT-3, SJEO, SJTO, STW, SJTW, SJOW, SJOOW, SJT, STOW, ST. Configuration: 6-15P Cord: Electrical: C-UL: Cord type: 14, 12, 10AWG 15, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 14AWG/3C: SPT-3, SJEO, SJTO, SJOW, SJOOW, SJT, STW, SJTW, STOW, ST. 12AWG/3C: SPT-3, SJEO,STW, SJTW, SJOW, SJOOW, SJTO, SJT, STOW, ST. 10AWG/3C: SPT-3, SJEO, SJTO, STW, SJTW, SJOW, SJOOW, SJT, STOW, ST. Prepared by Tonyfeng Page:33 / Total Page:250 Issued Data: 03/06/24

20) SP-039 Configuration: 5-20P Cord: Electrical: C-UL: Cord type: 21) SP-040 14, 12, 10AWG 18, 20, 20A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 14AWG/3C: SPT-3, SJEO, SJTO, SJOW, SJOOW, SJT, STW, SJTW, STOW, ST. 12AWG/3C: SPT-3, SJEO,STW, SJTW, SJOW, SJOOW, SJTO, SJT, STOW, ST. 10AWG/3C: SPT-3, SJEO, SJTO, STW, SJTW, SJOW, SJOOW, SJT, STOW, ST. Configuration: 6-20P Cord: Electrical: C-UL: Cord type: 22) SP-042 14, 12, 10AWG 18, 20, 20A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 14AWG/3C: SPT-3, SJEO, SJTO, SJOW, SJOOW, SJT, STW, SJTW, STOW, ST. 12AWG/3C: SPT-3, SJEO,STW, SJTW, SJOW, SJOOW, SJTO, SJT, STOW, ST. 10AWG/3C: SPT-3, SJEO, SJTO, STW, SJTW, SJOW, SJOOW, SJT, STOW, ST. Configuration: 6-30P Cord: Electrical: C-UL: Cord type: 12, 10AWG 25, 30A Yes. Prepared by Tonyfeng Page:34 / Total Page:250 Issued Data: 03/06/24

USL - Listed and/or CNL - C-UL or CSA Certified: 12AWG/3C: SPT-3, SJTW, SJE, SJEO, SJOW, SJOOW, SJT, ST. 10AWG/3C: 23) SP-043, SP-080 SJTW, SJE, SJEO, SJOW, SJOOW, SJT, ST. Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 24) SP-052 18, 16, 14, 12, 10AWG 10, 13, 15, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-1, NISPT-1, SJTW, SJEOW, SJOW, SJOOW, STW, SJTOW, SJEO, SJTO, HPN, SJE, SPT-2, NISPT-2, SPT-3, SVT, SJT, SJ. 16AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, STW, SJEW, SJTO, SJOW, SJOOW, SJEO, HPN, SJE, SJTOW, SJ, SJTW. 14AWG/3C: SJT, SJEOW, STW, SJTO, SJOW, SJ, SJOOW, SPT-3, SJEO, SJTOW, HPN, SJE, SJTW. 12AWG/3C: SJT, SJ, SPT-3, SJEO, SJTO, SJEOW, SJOW, SJOOW, SJTW, STW, SJTOW, SJTW. 10AWG/3C: SJT, SJ, SJTW, SJOW, SJOOW, SPT-3, STW, ST, SE, SJE. Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 18, 16, 14AWG 10, 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SJT, SJTW, ST 16AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, SJTW, ST 14AWG/3C: Prepared by Tonyfeng Page:35 / Total Page:250 Issued Data: 03/06/24

25) SP-056 SPT-3, SJT, SJTW, ST Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 26) SP-057 18, 16, 14, 12AWG 10, 13, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: SPT-1, NISPT-1, SPT-2, NISPT-2, SPT-3, SVT, SJT, ST 16AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, ST 14AWG/3C: SPT-3, SJT, ST 12AWG/3C: SJT, ST Configuration: 5-15P Cord: Electrical: C-UL: Cord type: 14, 12, 10AWG 15, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 14AWG/3C: SPT-3, SJEO, SJTO, SJOW, SJOOW, SJT, STW, SJTW, STOW, ST. 12AWG/3C: SPT-3, SJEO,STW, SJTW, SJOW, SJOOW, SJTO, SJT, STOW, ST. 10AWG/3C: SPT-3, SJEO, SJTO, STW, SJTW, SJOW, SJOOW, SJT, STOW, ST. 27) SP-060, -061 Configuration: 14-30P Cord: Electrical: C-UL: Cord type: 10AWG 30A Yes. Prepared by Tonyfeng Page:36 / Total Page:250 Issued Data: 03/06/24

28) SP-062 USL - Listed and/or CNL - C-UL or CSA Certified: 10AWG/4C: SRDT Configuration: 10-30P Cord: Electrical: C-UL: Cord type: 29) SP-065, -066 12, 10AWG 25, 30A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 12AWG/3C: 10AWG/3C: Configuration: 14-50P Cord: Electrical: C-UL: Cord type: 30) SP-090 SRDT SRDT 10, 8AWG 30, 40A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 10AWG/4C: 8AWG/4C: Configuration: 7-15P Cord: Electrical: C-UL: Cord type: 31) SP-091 SRDT SRDT 16, 14AWG 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/3C: 14AWG/3C: Configuration: 7-20P Cord: Electrical: C-UL: Cord type: SPT-3 SPT-3 14, 12AWG 15, 20A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 14AWG/3C: 12AWG/3C: SPT-3 SPT-3 Prepared by Tonyfeng Page:37 / Total Page:250 Issued Data: 03/06/24

32) SP-092 Configuration: 7-30P Cord: Electrical: C-UL: Cord type: 33) SP-093 12AWG 25A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 12AWG/3C: Configuration: 7-15P Cord: Electrical: C-UL: Cord type: 34) SP-094 SPT-3 16, 14AWG 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/3C: 14AWG/3C: Configuration: 7-20P Cord: Electrical: C-UL: Cord type: 35) SP-095 SPT-3 SPT-3 14, 12AWG 15, 20A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 14AWG/3C: 12AWG/3C: Configuration: 7-30P Cord: Electrical: C-UL: Cord type: 36) SP-120, -120P SPT-3 SPT-3 12AWG 25A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 12AWG/3C: Configuration: 1-15P Cord: Electrical: SPT-3 18, 16, 14AWG 10, 13, 15A Prepared by Tonyfeng Page:38 / Total Page:250 Issued Data: 03/06/24

C-UL: Cord type: 37) CS-024 Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: SPT-1, NISPT-1, SJ, SPT-1W, SPT-2, NISPT-2, HPN 16AWG/2C: SPT-2, NISPT-2, SJ, HPN 14AWG/2C: SJ Identical to SP-002 except body has shroud( 護裙 ) Configuration: 1-15P Cord: USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: SPT-1, NISPT-1, SJT, SPT-2, NISPT-2 16AWG/2C: Electrical: C-UL: Marking: 38) CS-027 SJT, SPT-2, NISPT-2 10, 13A Yes. A special-use non-detachable power supply cord intended for use with a toy transformer or electric toy shall be marked For use with toy transformers or electric toys or an equivalent statement. Configuration: 1-15P Cord: Electrical: C-UL: Cord type: 18AWG 10A Yes. USR - Recognized and/or CNR - C-UL or CSA Certified: 18AWG/2: AWM style 1015 5.4.4.2 Non-Standard Configuration.(Section1) 1) SP-017 Configuration: Cord: Electrical: C-UL: Non-standard 18AWG/2C 7A/125V Yes. Prepared by Tonyfeng Page:39 / Total Page:250 Issued Data: 03/06/24

Cord type: Marking: 2) SP-050 USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: See Sec. Gen. SPT-1 USR/CNR-R/C AWM style 1007 Only to be marked Detachable Power Supply Cord Special Use for use in vacuum cleaners only. Configuration: Cord: Electrical: C-UL: Cord type: Marking: 3) SP-051 Non-standard 18, 16AWG/3C 10, 13A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: 16AWG/3C: SPT-2 SPT-2 Detachable Power Supply Cord Special Use. Used only with Microwaves. Configuration: Cord: Electrical: C-UL: Cord type: Marking: Non-standard 18, 16, 14AWG/3C 10, 13, 15A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: 16AWG/3C: 14AWG/3C: SPT-2 SPT-2 SPT-3 Detachable Power Supply Cord Special Use. Used only with Microwaves. 5.4.5 Cord Connector Bodies. 5.4.5.1 NEMA Configuration.( Section 3) NEMA Configuration of Cord Connector Bodies contain in E124162SP Vol.1 Section 3. Engineering Considerations: Prepared by Tonyfeng Page:40 / Total Page:250 Issued Data: 03/06/24

USL---Indicates investigation to United States UL817. CNL---Indicates investigation to Canadian National Standard C22.2 No.21-95 and C22.2 No.42 Conditions of acceptability; These devices have been evaluated when molded on the specific conductor size and type specified in the procedure. Use with any other size of or type cord may require additional evaluation. These fittings should be used only within their electrical rating. Products: 1) SP-018 Configuration: 1-15R Cord: 16, 14AWG Electrical: 13, 15A C-UL: Yes. Cord type: USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/2C: SPT-2, NISPT-2, SJT, SJTW, HPN(15A) 14AWG/2C: SJT, SJTW Marking: Cord Set Out Door Use 2) SP-019 Configuration: 1-15R, 3 outlet Cord: 16AWG Electrical: 13A C-UL: Yes. Cord type: USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/2C: SPT-2, NISPT-2 Marking: Cord Set General Use, R/C Cord Tag Required. 3) SP-032 Configuration: 5-15R, 3 outlet Cord: 16, 14, 12AWG Electrical: 13, 15, 15A C-UL: Yes. Cord type: USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/3C: SJT, SJTW, SPT-2, SPT-3, NISPT-2 Prepared by Tonyfeng Page:41 / Total Page:250 Issued Data: 03/06/24

4) SP-034 14AWG/3C: 12AWG/3C: SJT, SJTW, SPT-3 ST, SJTW Configuration: 5-15R Cord: Electrical: C-UL: Cord type: Marking: 5) SP-044, -081 16, 14, 12, 10AWG 13, 15, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/3C: 14AWG/3C: 12AWG/3C: 10AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, ST, SJO, SJTW. SPT-3, ST, SJT, SJO, SJTW ST, SJT, SJO, STW, SPT-3, SJTW ST, SJT, SJO, SJTW Cord Set Out Door Use Configuration: 5-15R Cord: Electrical: C-UL: Cord type: Marking: 16, 14, 12, 10AWG 13, 15, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/3C: 14AWG/3C: 12AWG/3C: 10AWG/3C: SPT-2, NISPT-2, SPT-3, SJT, ST, SJO, SJTW. SPT-3, ST, SJT, SJO, SJTW ST, SJT, SJO, STW, SPT-3, SJTW ST, SJT, SJO, SJTW Cord Set Out Door Use 6) SP-053, SP-053L Configuration: Cord: Electrical: C-UL: Cord type: Marking: 5-15R, 3 outlet 12, 10AWG 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 12AWG/3C: 10AWG/3C: SJT, SJTW, STW SJT, SJTW, STW Prepared by Tonyfeng Page:42 / Total Page:250 Issued Data: 03/06/24

7) SP-054 8) SP-055 Cord Set Out Door Use or Adapter Cord Set Configuration: Cord: Electrical: C-UL: Cord type: 5-15R, 3 outlet 16, 14AWG 13, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/3C: 14AWG/3C: Configuration: Cord: Electrical: C-UL: Cord type: Marking: SJT, SJTW, SPT-2, SPT-3, NISPT-2 SJT, SJTW, SPT-3 5-15R, 3 outlet 16, 14, 12AWG 13, 15, 15A Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 16AWG/3C: 14AWG/3C: 12AWG/3C: SJTW SJTW SJTW, SJT, STW Cord Set Out Door Use or Adapter Cord Set 5.4.5.2 IEC/Non-Standard Configuration.(Section 2) IEC/Non-Standard Configuration of Cord Connector Bodies contain in E124162SP Vol.1 Section 2. Engineering Considerations: USL---Indicates investigation to United States UL817. CNL---Indicates investigation to Canadian National Standard C22.2 Conditions of acceptability; Products: 1) SP-011 No.21-95 and C22.2 No.42 These devices have been evaluated when molded on the specific conductor size and type specified in the procedure. Use with any other size of or type cord may require additional evaluation and should be sent to UL. These fittings should be used only within their electrical rating. Configuration: Cord: Phenolic 18AWG/2C Prepared by Tonyfeng Page:43 / Total Page:250 Issued Data: 03/06/24

Electrical: C-UL: Cord type: 2) SP-012 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: 3) SP-013 HPN Non-standard 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: 4) SP-013B SPT-1, NISPT-1, SPT-2, NISPT-2. C7 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: 5) SP-013R SPT-1, NISPT-1, SPT-2, NISPT-2. C7 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: SPT-1, NISPT-1, SPT-2, NISPT-2. C7 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: 6) SP-016, SP-016X SPT-1, NISPT-1, SPT-2, NISPT-2. Prepared by Tonyfeng Page:44 / Total Page:250 Issued Data: 03/06/24

Configuration: Cord: Electrical: C-UL: Cord type: 7) SP-016B C1 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: 8) SP-016C SPT-1, NISPT-1, SPT-2, NISPT-2. C1 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: 9) SP-016D SPT-1, NISPT-1, SPT-2, NISPT-2. C1 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: 10) SP-016E SPT-1, NISPT-1, SPT-2, NISPT-2. C1 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: SPT-1, NISPT-1, SPT-2, NISPT-2. C1 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: Prepared by Tonyfeng Page:45 / Total Page:250 Issued Data: 03/06/24

11) SP-016H 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: 12) SP-023 SPT-1, NISPT-1, SPT-2, NISPT-2. Non-standard 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: 13) SP-023L SPT-1, NISPT-1, SPT-2, NISPT-2. C13 18, 16, 14AWG 10, 13, 15A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: 16AWG/3C: 14AWG/3C: Configuration: Cord: Electrical: C-UL: Cord type: 14) SP-023R SJT, SVT SJT SJT C13 18, 16, 14AWG 10, 13, 15A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: 16AWG/3C: 14AWG/3C: Configuration: Cord: Electrical: C-UL: Cord type: SJT, SVT SJT SJT C13 18, 16, 14AWG 10, 13, 15A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: 16AWG/3C: SJT, SVT SJT Prepared by Tonyfeng Page:46 / Total Page:250 Issued Data: 03/06/24

15) SP-023RM 14AWG/3C: Configuration: Cord: Electrical: C-UL: Cord type: 16) SP-024 SJT C13 18, 16, 14AWG 10, 13, 15A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: 16AWG/3C: 14AWG/3C: Configuration: Cord: Electrical: C-UL: Cord type: 17) SP-026 SJT, SVT SJT SJT C13 18, 16, 14AWG 10, 13, 15A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/3C: 16AWG/3C: 14AWG/3C: Configuration: Cord: Electrical: C-UL: Cord type: 18) SP-041 SJT, SPT-2, HPN, SVT SJT, HPN SJT Non-standard 18AWG/2C 10A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: Configuration: Cord: Electrical: C-UL: 19) SP-372 Configuration: Cord: Electrical: SPT-1, NISPT-1, SPT-2, NISPT-2. Non-standard 18, 16, 14AWG 10, 13, 15A/125V Yes. Non-standard 18, 17AWG 10, 12A/125V Prepared by Tonyfeng Page:47 / Total Page:250 Issued Data: 03/06/24

C-UL: Cord type: 20) SP-605 Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 18AWG/2C: 17AWG/2C: Configuration: Cord: Electrical: C-UL: Cord type: SPT-1, NISPT-1, SPT-2, NISPT-2, SVT SVT C1 27AWG/2C 2A/125V Yes. USL - Listed and/or CNL - C-UL or CSA Certified: 27AWG/2C: 5.4.6 Current Taps.(Section 1) 1) SP-015P TST, TPT Configuration: 1-15P & 1-15R Cord: Electrical: C-UL: Cord type: 20AWG/2C: XT 18AWG/2C: 20, 18, 16AWG 3, 10, 13A Yes. SPT-1, NISPT-1, SPT-2, NISPT-2, HPN 16AWG/3C: SPT-2, NISPT-2, HPN 5.5 File No. E114235(ZJCZ, ZJCZ7), Vol.2 的產品 5.5.1 E114235 文件結構 : Follow-up Service Procedure Issued 1989.08.13, Revised: 1998.04.17 E114235 Vol.1 Sec. Gen. Issued 1989.08.13, Revised: 1998.04.17 E114235 Vol.1 Index Issued 1989.08.13, Revised: 2002.03.18 E114235 Vol.1 App. A Issued 1998.04.17, Revised: 2002.09.06 E114235 Vol.1 Sec. 1 Issued 1989.08.13, Revised: 2001.09.17 E114235 Vol.1 Sec. 3 Issued 1989.08.16, Revised: 2000.11.16 E114235 Vol.1 Sec. 4 Issued 1989.12.19, Revised: 2001.07.09 E114235 Vol.1 Sec. 5 Issued 1993.04.30, Revised: 1999.10.27 E114235 Vol.1 Sec. 6 Issued 1997.06.04, Revised: 2001.02.09 E114235 Vol.1 Sec. 8 Issued 1999.01.07 Prepared by Tonyfeng Page:48 / Total Page:250 Issued Data: 03/06/24

E114235 Vol.1 Sec. 9 Issued 1999.04.27. E114235 Vol.1 Sec. 10 Issued 2000.06.16, Revised: 2002.03.18 5.5.2 E114235 包括的產品 1)E114235 Vol.1 Sec. 1----PVC Insulated Parallel Cords. USL: CNL: SPT-1, SPT-2, SPT-3, NISPT-1, NISPT-2, SPT-1W, SPT-2W. SPT-1, SPT-2, SPT-3. UL62 Flexible Cords and Fixture Wires Insulation: USL: CNL: C22.2 No.49-92 Flexible Cords and Cables 60, 75, 90, 105C PVC 60, 105C PVC USL Outdoor use cords, type SPT-1W, SPT-2W must use a Recognized Component-Polymeric Materials for Use in Wire and Cable(QMTT2), PVC insulation material, rated for 60C water resistance and 720 hrs. sunlight resistance Jacket(Non-integral): USL: CNL: 60, 75, 90, 105C PVC 60, 105C PVC Ground Conductor(non-integral): Integral two conductor cord may include non-integral green grounding conductor. USL: CNL: Optional Marking: 60, 75, 90, 105C PVC 60, 105C PVC SPT-1W, SPT-2W may be marked OUTDOOR on the cable surface Flame Rating Marking: USL/CNL: May be marked VW-1 or FT1 when complies with Flame test. Must be marked FT2 if not marked FT1 2)E114235 Vol.1 Sec. 3----PVC Jacket Cords USL:SVT, SVTO, SJT, ST, SJTO, SJTW, STW, STO,STOW, SJTOW CNL: SVT, SVTO, SJT, ST, SJTO, SJTW, STW, STO,STOW, SJTOW UL62 Flexible Cords and Fixture Wires Insulation: USL: CNL: C22.2 No.49-92 Flexible Cords and Cables 60, 75, 90, 105C PVC 60, 105C PVC Outdoor use cords must use a Recognized Component-Polymeric Materials for Use in Wire and Cable(QMTT2), PVC insulation Prepared by Tonyfeng Page:49 / Total Page:250 Issued Data: 03/06/24

Shielded: Jacket: material, rated for 60C water resistance. USL/CNL, optional, Cord may employ an aluminum faced polyester(mylar) type shield in accordance with the appropriate standards. Cords employing shields shall be marked Shielded USL: CNL: Optional: 60, 75, 90, 105C PVC 60, 105C PVC Outdoor use cords must use a Recognized Component-Polymeric Materials for Use in Wire and Cable(QMTT2), PVC Jacket material, rated for 720 hrs. sunlight resistance. Jacket of outdoor use cords is a Recognized Component-Polymeric Materials for Use in Wire and Cable(QMTT2) PVC Jacket rated for 720 hrs and insulation is a Recognized Component-Polymeric Materials for Use in Wire and Cable(QMTT2) PVC rated for 60C water resistance. Optional word WATER RESISTANT may be marked on cable surface. USL/CNL: USL/CNL: May be helically coiled Drain wire provided it to be in contact with the metal part of the tap. Flame Rating Marking: USL/CNL: May be marked VW-1 or FT1 when complies with Flame test. Must be marked FT2 if not marked FT1 3)E114235 Vol.1 Sec. 4----CXTW, XTW USL: Single and two conductor Type CXTW, rated 105 : Two conductor Type XTW, rated 105 Conductor: CXTW: 22AWG~18AWG XTW: Insulation: 20AWG~18AWG Minimum average thickness 30 mils. Types CXTW and XTW shall employ any Recognized Component- Polymeric Materials for use in Wire and Cable(QMTT2), PVC, Recognized for 105, 720 hours sunlight resistance and wet rated Flexible Cords. Flame Rating: Must be marked VW-1 Prepared by Tonyfeng Page:50 / Total Page:250 Issued Data: 03/06/24

Note: 22AWG conductor shall employ flexible stranding composed of 36~34 AWG strands with a maximum length of lay of 1.25 in. 4)E114235 Vol.1 Sec. 5---Tinsel Cord USL: CNL: TST TST UL62 Flexible Cords and Fixture Wires Conductor: C22.2 No.49-92 Flexible Cords and Cables 27AWG construction: Insulation: Flame Rating Marking: USL/CNL 60C PVC 3/6/39AWG or 6/37AWG USL/CNL: May be marked VW-1 or FT1 when complies with Flame test. Must be marked FT2 if not marked FT1 5)E114235 Vol.1 Sec. 6----Heater Cord USL: CNL: HPN, HPD HPN UL62 Flexible Cords and Fixture Wires Integral Insulation: USL: CNL: C22.2 No.49-92 Flexible Cords and Cables Construction Details: USL: CNL: 90, 105C CPE 90, 105C CPE Type HPN, integral constructions only. Type HPD, tinned copper conductors only Type HPN, integral constructions only. Non-integral Ground Conductor: Cords may include non-integral green grounding conductor. USL: CNL: 90, 105C EP or 90, 105C CPE 90, 105C EP Flame Rating Marking: USL/CNL: May be marked VW-1 or FT1 when complies with Flame test. Must be marked FT2 if not marked FT1 6)E114235 Vol.1 Sec. 8---Tinsel Cord USL: CNL: TPT TPT UL62 Flexible Cords and Fixture Wires Prepared by Tonyfeng Page:51 / Total Page:250 Issued Data: 03/06/24

Conductor: C22.2 No.49-92 Flexible Cords and Cables 27AWG construction: An assembly of seven or more strands, each consisting of a flattened copper wire no larger than No.35AWG and no smaller than No. 39 AWG, and having a total cross-sectional area of no less than 198 cmil or 0.100mmsq(No.27). The construction and arrangement of the strands is not specified, but the finished cord shall be acceptable for the purpose, as determined by an investigation that includes a Flexibility Test. Insulation: Flame Rating Marking: USL/CNL 60C PVC USL/CNL: May be marked VW-1 or FT1 when complies with Flame test. Must be marked FT2 if not marked FT1 7)E114235 Vol.1 Sec. 9---Range and Dryer Cords USL: CNL: SRDT, rated 60 or 90C DRT, rated 60C UL62 Flexible Cords and Fixture Wires Insulation: Jacket: USL: CNL: USL: CNL: C22.2 No.49-92 Flexible Cords and Cables 60, 90C PVC 60C PVC 60, 90C PVC 60C PVC Flame Rating Marking: USL/CNL: May be marked VW-1 or FT1 when complies with Flame test. Must be marked FT2 if not marked FT1 8)E114235 Vol.1 Sec. 10---Thermoset Jacket Cords USL: CNL: SJ, SJO, SJOO, SJOOW SJ, SJO, SJOO, SJOOW UL62 Flexible Cords and Fixture Wires Conductors; C22.2 No.49-92 Flexible Cords and Cables Tinned copper conductors only. Insulation: No.18~12AWG range: Minimum average thickness 38 mils, minimum at any point 31mils. Prepared by Tonyfeng Page:52 / Total Page:250 Issued Data: 03/06/24

Shield: Jacket: USL: CNL: 60, 75, 90, 105C---EP 60, 90, 105C---EP The temperature limits for types SJOO, SJOW, SJOOW are 60, 75 or 90C. USL/CNL: Shield not authorized. No.18~14AWG range: Minimum average thickness 42 mils, minimum at any point 34mils. USL: CNL: 60, 75, 90, 105C---CP 60, 90, 105C---CP For types SJOO, SJOW, SJOOW the following must be used: USL: 60, 75, 90---CP CNL:60, 90---CP Flame Rating Marking: USL/CNL: May be marked VW-1 or FT1 when complies with Flame test. Must be marked FT2 if not marked FT1 5.6 File No. E114236(ZIPR), Vol.2 的產品 Thermoplastic insulated wires Fixture Wire Types: FFH2,RFH-2 5.7 File No. E213359(QMFZ2), Vol.1 的產品 5.7.1 E213359 文件結構 : Follow-up Service Procedure Issued 2001.02.09, Revised: 2003.03.25 E213359 Vol.1 Sec. Gen. Issued 2003.03.25 E213359 Vol.1 Sec.1 Issued 2000.10.06, Revised: 2001.02.09 5.7.2 E213359 包含的產品. Type: R Product: Component Plastic: PVC Material Designation: G-006 5.8 File No. E191227(QMTT2), Vol.1 的產品 5.8.1 E191227 文件結構 : Follow-up Service Procedure Issued 1998.05.28, Revised: 2003.02.24 Type: R E191227 Vol.1 Sec. Gen. Issued 1998.05.28, Revised: 2003.02.24 Product Cover: Component-Polymeric Material for use in Wire and Cables E191227 Vol.1 Sec.1 Issued 1998.05.28 E191227 Vol.1 Sec.2 Issued 1998.05.28 5.8.2 E191227 包含的產品. 1)E191227 Vol.1 Sec.1 Prepared by Tonyfeng Page:53 / Total Page:250 Issued Data: 03/06/24

Product: PVC 720 Hr Sunlight Resistant Insulation and/or Jacket Compounds Grade Designation: B-7023 Color: Insulation: Jacket: All X X Temperature rating:105c 2)E191227 Vol.1 Sec.2 Product: PVC Flexible Cord Wet-Location Insulation Compounds Grade Designation: B-7023 Color: All Min Insulation Thickness, mils: 30 Flame rating: VW-1 5.9 File No. E193824(YDPU2), Vol.1 的產品 Extruded Tubing, Electrical Component Type: Max V: Color: VW-1: N5U 300, 600V BK, CL Yes. 5.10 File No. E124233(ZPFW2, ZPFW8), Vol.1 的產品 Wiring Harnesses 5.11 File No. E146818(ZPFW2, ZPFW8), Vol.1 的產品 Processed Wiring-Component 5.12 File No. MH18785(PGIS2), Vol.1 的產品 5.12.1 MH18785 文件結構及產品 Follow-up Service Procedure Issued 1995.10.02, Revised: 1996.08.12 MH18785 Vol.1 App. A Issued 1995.10.02 MH18785 Vol.1 Sec.1 Issued 1995.10.02, Revised: 1996.08.12 Product Covered: Pressure-sensitive limited use Marking and Labeling System CE1000-1 MH18785 Vol.1 Sec.2 Issued 1995.10.03, Revised: 1997.06.10 Product Covered: Pressure-sensitive limited use Marking and Labeling System Hang Type Designated CE1000-2 MH18785 Vol.1 Sec.3 Issued 1995.10.04 Product Covered: Prepared by Tonyfeng Page:54 / Total Page:250 Issued Data: 03/06/24

Pressure-sensitive limited use Marking and Labeling System 73518 由于周氏目前不制作述標簽, 故此 File 暫時無用. 5.13 File No. E176849(OBMW2), Vol.1 的產品 Component-Magnet Wire Product: 2UEW, PEW 漆包線 --- 此 File 為華藝使用. Prepared by Tonyfeng Page:55 / Total Page:250 Issued Data: 03/06/24

Item 4. CCC 認証產品. 1. CCC 線材標準依据 : GB5013.1~7-1997 額定電壓 450/750V 及以橡皮絕緣電纜. 等同采用 IEC245.1~7-1994 取代 GB5013.1~3-85, GB5013.4-87 和 GB3958-83( 橡皮絕緣編織軟線 ) GB5023.1~7-1997 額定電壓 450/750V 及以聚氯烯絕緣電纜等同采用 IEC227.1~7-1994 取代 GB5023.1~3-85 JB8734.1~5-1998 額定電壓 450/750V 及以聚氯烯絕緣電線和軟線此標準是對 GB5023.1~7-1997 的補充, 它涵蓋了原在 GB5023.1~3-85 及 GB5023.4~5-86 的部分規定, 而 GB5023.1~7-1997 已等同采用了 IEC227, 因而有些產品盡管國內市場及出口貿易有需求, 但未能納入其, 故這部分將出現在 JB8734.1~5-1998. 另外, 此標準的主要技術參數, 基本試驗條件及性能指標均與 GB5023.1~7-1997 的規定協調㆒致, 本標準將取代 GB5023.1~3-85 及 GB5023.4~5-86 相應的內容. JB8735.1~3-1998 額定電壓 450/750V 及以橡皮絕緣軟線和軟電纜此標準是對 GB5013.1~7-1997 的補充, 它涵蓋了原在 GB5013.2-85 和 GB3958-83 的部分規定, 而 GB5013.1~7-1997 已等同采用了 IEC245, 因而有些產品盡管國內市場及出口貿易有需求, 但未能納入其, 故這部分將出現在 JB8735.1~3-1998. 另外, 此標準的主要技術參數, 基本試驗條件及性能指標均與 GB5013.1~7-1997 的規定協調㆒致, 本標準將取代 GB5013.1~2-85 及 GB3958-83 相應的內容. 證書編號型號範圍 CCC 字高 2002010105011353 227 IEC 01(BV)-450/750 1.5-10 1.5-2.5 1.0 4.0-10 1.2 227 IEC 02(RV)-450/750 1.5-2.5 1.5-2.5 1.0 227 IEC 05(BV)-300/500 0.5-1 0.5-1 0.6 227 IEC 06(RV)-300/500 0.5-1 0.5-1 0.6 227 IEC 07(BV-90)-300/500 0.5-2.5 0.5-1.5 0.6 2.5 1.0 227 IEC 08(RV-90)-300/500 0.5-2.5 0.5-1.5 0.6 2.5 1.0 BV-300/500 0.75-1 0.75-1 0.6 BVR-450/750 2.5-70 2.5-10 1.2 16 1.5 25-70 2.0 2003010105052144 227 IEC 02(RV)-450/750 4.0-25 4.0-25 1.5 2002010105011354 227 IEC 10(BVV)-300/500 1.5-10(2-5 芯 ) 1.5-10(2 芯 ) 1.0 1.5-10(3-5 芯 ) 1.5 Prepared by Tonyfeng Page:56 / Total Page:250 Issued Data: 03/06/24

BVV-300/500 0.75-10 0.75-2.5 1.0 2.5-10 1.5 BVVB-300/500 0.75-10(2,3 芯 ) 0.75-4(2 芯 ) 1.0 0.75-2.5(3 芯 ) 1.0 6-10(2 芯 ) 1.5 4-10(3 芯 ) 1.5 2002010105011356 227 IEC 42(RVB)-300/300 0.5-0.75 0.5-0.75 0.8 227 IEC 52(RVV)-300/300 0.5-0.75(2,3 芯 ) 0.5-0.75(2,3 芯 ) 1.2 227 IEC 53(RVV)-300/500 0.75-2.5(2-5 芯 ) 0.75-2.5(2 芯 ) 1.2 0.75-2.5(3 芯 ) 1.5 0.75-2.5(4-5 芯 ) 2.0 RVS-300/300 0.5-0.75 0.5-0.75 1.0 2002010104011357 245 IEC 53(YZ)-300/500 0.75-2.5(2-5 芯 ) 0.75-2.5(2-3 芯 ) 1.0 0.75-2.5(4-5 芯 ) 1.5 245 IEC 57(YZW)-300/500 0.75-2.5(2-5 芯 ) 0.75(2 芯 ) 1.2 1.0-2.5(2 芯 ) 1.5 0.75-2.5(3-5 芯 ) 1.5 245 IEC 66(YCW)-450/750 1.5-6(1 芯 ) 1.5-6(1 芯 ) 1.0 245 IEC 66(YCW)-450/750 1.0-6(2-5 芯 ) 1.0-6(2-5 芯 ) 1.5 YQ-300/300 0.3-0.5(2,3 芯 ) 0.3-0.5(2,3 芯 ) 1.2 YQW-300/300 0.3-0.5(2,3 芯 ) 0.3-0.5(2,3 芯 ) 1.2 YZ-300/500 4-6(2-5 芯 ), 1.5-6( ㆕芯㆔大㆒小 ) 4-6(2-5 芯 ), 1.5-6( ㆕芯㆔大㆒小 ) 1.5 YZW-300/500 4-6(2-5 芯 ), 1.5-6( ㆕芯㆔大㆒小 ) 4-6(2-5 芯 ), 1.5-6( ㆕芯㆔大㆒小 ) 2.0 YC-450/750 1.5-6(1-5 芯 ) 2.5-6( ㆕芯㆔大㆒小 ) 1.5-6(1-5 芯 ) 2.5-6( ㆕芯㆔大㆒小 ) 1.5 YCW-450/750 2.5-6( ㆕芯㆔大㆒小 ) 2.5-6( ㆕芯㆔大㆒小 ) 1.5 YZ-300/500 0.75-6(6 芯 ) 0.75-6(6 芯 ) 2.0 YZW-300/500 0.75-6(6 芯 ) 0.75-6(6 芯 ) 2.0 YZB-300/500 0.75-6(2-6 芯 ) 0.75-6(2-3 芯 ) 1.5 0.75-6(4-6 芯 ) 2.0 YZWB-300/500 0.75-6(2-6 芯 ) 0.75-6(2-3 芯 ) 1.5 0.75-6(4-6 芯 ) 2.0 2002010104011358 245 IEC51(RX)-300/300 0.75-1.5(2,3 芯 ) 0.75-1.5(2,3 芯 ) 0.6 RX-300/300 0.3-4(2,3 芯 ) 0.3-4(2,3 芯 ) 0.6 RXS-300/300 0.3-4(2 芯 ) 0.3-4(2 芯 ) 0.6 RXH-300/300 0.3-4(2,3 芯 ) 0.3-4(2,3 芯 ) 1.0 2. CCC 器具耦合器標準依據 : GB17465.1:1998 eqv IEC320-1:1994. Appliance couplers for household and similar general purpose. Part1: General requirements( 家用和類似用途的器具耦合器, eqv=equivalent 等效采用 ) 周氏取得 CCC 認證的器具耦合器產品共 6 個, 如 : CE-045A 10A 250V 單相兩极帶接不可拆線移動式連接器. 是用於冷條件 Ι 類設備. 證書號 : 2002010204015618 CE-601A 10A 250V 單相兩极帶接不可拆線移動式連接器. 是用於冷條件 Ι 類設備. Prepared by Tonyfeng Page:57 / Total Page:250 Issued Data: 03/06/24

證書號 : 2002010204015617 3. CCC 插頭, 插座標準依據 : CE-602A 2.5A 250V 單相兩极不可拆線移動式連接器. 是用於冷條件 Ⅱ 類設備. 證書號 : 2002010204015614 CE-605A 0.2A 250V 單相兩极不可拆線移動式連接器. 是用於冷條件 Ⅱ 類設備 ( 如果設備標準允許, 僅用于連接小型手持 Ⅱ 類設備 ). 證書號 : 2002010204015615 CE-608A 2.5A 250V 單相兩极帶接不可拆線移動式連接器. 是用於冷條件 Ι 類設備. 證書號 : 2002010204015032 CS-001A 10A 250V 單相兩极帶接不可拆線移動式連接器. 是用於熱條件 Ι 類設備. 證書號 : 2002010204015616 GB2099.1-1996 家用或類似用途插頭插座. 1 通用要求等效采用了 IEC60884-1:1994+AMD1, AMD2 標準 GB1002-1996 單相插頭插座基本參數和呎寸. 周氏取得 CCC 認證的插頭產品共 26 個, 插座共 2 個如 : 証書編號 : 2002010201015127 單相兩极帶接不可拆線插頭. CN-001 6A 250V CN-001 10A 250V CN-002 6A 250V CN-002 10A 250V CN-003 6A 250V CN-003 10A 250V CN-004 16A 250V CN-006 6A 250V CN-006 10A 250V CN-007 6A 250V CN-007 10A 250V CN-008 16A 250V Prepared by Tonyfeng Page:58 / Total Page:250 Issued Data: 03/06/24

CN-009 16A 250V CN-011 6A 250V CN-011 10A 250V CN-012 16A 250V CN-017 16A 250V CN-016 6A 250V CN-016 10A 250V CN-015 10A 250V CN-018 6A 250V CN-018 10A 250V 証書編號 : 2002010201014989 單相兩极不可拆線插頭. CN-005 6A 250V CN-005 10A 250V CN-019 6A 250V CN-019 10A 250V 証書編號 : 2002010201014990 CN-503 10A 250V 單相兩极帶接不可拆線移動式插座 CN-501 10A 250V 單相兩极不可拆線移動式插座 Prepared by Tonyfeng Page:59 / Total Page:250 Issued Data: 03/06/24

Item 5. 日本 PSE-mark, T-mark, F-mark 認証產品. 1. PSE-mark, T-mark, F-mark 簡介平成元年 =1988 年, 平成 5 年 =1988+5=1993 年. 周氏的日本認証產品分為兩類第㆒類為 T-mark( 包括 PSE-mark) 第㆓類為 F-mark T-Mark 証書是由 MITI(Ministry of International Trade and Industry) 通商產業省或 METI(Ministry of Economy Trade and Industry) 經濟產業省根据 JET 發出的合格証及型試試驗結果和預訂型式認可番號發出的, 証書包括型式承認和型式區分表兩部分. 周氏的 T-Mark 証書屬於种電器用品, 具体結構在型式區分表進行描述. 周氏早期的 T-Mark 證書, 即平成 5 年及之前, 是由 TAYA 公司代理認証, 在平成 6 年及之后則全部轉為周氏自己申請, 不再利用代理認証公司. 日本政府自 2001 年 4 月 1 日起頒布實施電器產品及材料安全法 ( Electrical Appliance and Material Safety Law ), 原電器產品及材料管制法 ( Electrical Appliance and Material Control Law ), 自 2001 年 4 月 1 日起廢止實施. 2001 年 4 月 1 日前提請的安規申請仍以原電器產品及材料管制法規定的程序執行. 自 2001 年 4 月 1 日以後提出的安規申請以新的電器產品及材料安全法規定的程序執行. 在原電器產品及材料管制法規定, 日本電器安全檢驗所 (JET) 為日本政府經濟產業省指定的檢測機構, 在 JET 出具合格證書 ( JET 證書 ) 后, 同時授權 JET 代表日本政府經濟產業省發放 METI 證書, 即 T-mark 證書, 獲得 T-mark 證書的產品, 即可印 T-mark 標誌. 在新的電器產品及材料安全法,JET( 日本電器安全檢驗所 ) 仍為日本政府經濟產業省指定的合法檢測機構, 但取消 METI 證書即 T-mark 證書. 因而在此程序,JET 只可簽發 JET 證書, 不可再簽發 METI 證書, 相應產品也不可再印 T-mark. 原來 T-mark 以製造商名義取得, 因而與之相適應的責任與義務由製造商承擔. 但現行的電器產品與材料安全法規定製造廠商只有責任與義務取得產品符合證書即 JET 證書. 日本進口商負責保存國外製造商提供的產品符合證書之副本. 在日本經濟產業省注冊備案后, 即可在產品加印 PSEmark. 日本進口商在該宗進口業務開始后的 30 之內必須通知日本經濟產業省電力安全課進行備案. 因而我們可以在客戶通知許可的情況, 在客戶作備案動作之前加印 PSE-mark. 對日本國內公司, PSE-mark 的過渡期為 2 年 ( 電線 ) 或 3 年 ( 配線器具 ), 但對國外制造商, T-mark 從取得之后㆒直有效 7 年. 題. 面是我們與日本 JET 聯絡信函的㆒段內容, 有助于理解 PSE-mark 印字問 In principle, PSE-mark should not be printed on a product when it applies for Certification of Conformity Assessment and It s copies. Refering the flow chart, PSEmark can be printed on a product after Japanese importer register to MITI with Copy of Certification of Conformity Assessment and Test report of a product of foreign Prepared by Tonyfeng Page:60 / Total Page:250 Issued Data: 03/06/24

manufactures. However, it is hard for Japanese importers to print such products as cord, wiring devices etc, so Japanese importers and foreign manufacturers should make contract such that manufacturers print PSE-mark, JET, Japanese importer s name on products on behalf of Japanese importers. A foreign manufacture should apply for not PSE-mark, but Certification of Conformity Assessment and It s copies under the new Electrical Appliance and Material Safety Law. Japanese importer can import from these certified manufacturers (please note the products whose T-mark hasn t expired can be imported to Japan though Japanese importers without this certification). T-mark applied and accomplished by a foreign manufacturer will be effective till the printed expired date(also after March 31 of 2003 or 2004). It means Japanese importers can keep importing such products with the T-mark certified under the name of a foreign manufacturer till the expired date. In contrast, T-mark certified under the name of Japanese importer should be change to PSE-mark befor March 31 of 2003 (cord) or 2004 (wiring devices) because new Electrical Appliance and Material Safety Law will be applied only to Japanese companies. It is not required to newly apply for PSE-mark till the T-mark s expired date. Therefore, a product made by a foreign manufacturer imported with T-mark under the name of Japanese importer should be printed PSE-mark, JET, Japanese importer s name on after March 31 of 2003 or 2004. Such contract should be made between a Japanese importer and a foreign manufacturer. F-Mark 証書是由 JMI 或 JQA 發出的, JMI(Japan Machinery Inspection) 是日本機械電子檢查檢定協會, 是受 MITI 控制的㆒個組織, JQA(Japan Quality Assurance Organization) 是日本品質保證機構. F-Mark 關注的是電線的燃燒性能是否合格, 當樣品經過 JMI 或 JQA 測試合格后, 會發出㆒份機器用電線的燃燒性能登錄證明書和㆒份型式區分表. 周氏產品在平成 5 年獲得 4 份証 F-Mark 証書, 當時是由日本 TAYA 公司代理認証並由 JMI 發証, 在平成 9 年由周氏自己申請並獲得 1 份 F-Mark 證書, 由 JQA 發出. 2. T-Mark 產品周氏在日本獲得 T-Mark 產品的登錄番號有 3 個, 分別是 F279, F280 和 F743. 具体分類如 : F279 配線器具製造事業 ( 插頭插座類 ), 共有 5 類 (25 個型式 ), 于平成 5 年登錄. a. 種電器用品名 : 插入式插頭 (Plug) 認可番號 : 41-22317, 41-22318, 41-25398, 41-25399, 41-25921, 41-25922, 41-26128, 41-27211, 41-27237, 41-27353, JET1206-43001-1001, JET1206-43001-1002 b. 種電器用品名 : 尾插 (Cord connector body) Prepared by Tonyfeng Page:61 / Total Page:250 Issued Data: 03/06/24

認可番號 : 41-22315, 41-22316, 41-25007, 41-25575, 41-26720 c. 種電器用品名 : 器具耦合器 ( 器具用插入式尾插 ). 認可番號 : 41-23743, 41-26124, 41-26172 d. 種電器用品名 : 多功能分支插座. 認可番號 : 41-26117, 41-26204, 41-26292 e. 種電器用品名 : 適配器或轉換器 (Adaptor). 認可番號 : 41-26078, 41-26079 ( 注 : 述証書由 MITI 發布 ) F280 合成樹脂 (Plastic material) 系絕緣電線類製造事業 (PVC 絕緣電線類 ), 于平成 5 年登錄 a. 種電器用品名 : 單芯 PVC 線合格書番號 : JET1206-12005-1001, JET1206-12011-1001, b. 種電器用品名 : Tinsel wire 認可番號 : 12-9025 c. 種電器用品名 : Cab tyre cord JET1206-12011-1002, 12-8400(HVSF 取消 ) 認可番號 : 12-8210, 12-8211, 12-9835. ( 注 : 述証書由 MITI 發布 ) F743 橡膠系絕緣電線類製造事業 ( 橡膠線類 ), 于平成 12 年登錄 a. 種電器用品名 : Cab tyre cord 認可番號 : 11-5099 b. 種電器用品名 : 其它橡膠線認可番號 : 11-5108, 11-5087, 11-5096 ( 注 : 述証書由 METI 發布 ) 2.1 F279-- 配線器具 ( 插頭 & 尾插類 ): 標準 : JIS C8303-1993 Plugs and receptacles for domestic and similar general use. 日本配線器具根据型式區分共有 25 個產品認証. 插頭 & 尾插的認証是根據型式區分來確定, 如果只是外形不同, 則不必重新認証, 找㆒個型式區分相同的証書套用即可, 本廠的插頭 & 尾插編號與証書不是㆒對㆒的關係, 具體如 : 1) 型式承認番號 41-22315, 獲証日期 : 平成 12 年 8 月 11 日 ( 最早于平成 5 年取得認証 ) 型式試驗規格 :125V, 7A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :3~7A 3) 极數 :3 极 ( 包括接极 ) 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material) 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 無 8) 成型方式 : ㆒体化 Prepared by Tonyfeng Page:62 / Total Page:250 Issued Data: 03/06/24

9) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-024 2) 型式承認番號 41-22316 獲証日期 : 平成 12 年 8 月 25 日 ( 最早于平成 5 年取得認証 ) 型式試驗規格 125V, 10A, 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :7~10A 3) 极數 :3 极 ( 包括接极 ) 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 無 8) 成型方式 : ㆒体化 9) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-024 3) 型式承認番號 41-22317 獲証日期 : 平成 12 年 8 月 29 日 ( 最早認証時間 : 平成 5 年 ) 型式試驗規格 125V, 10A. 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :7~15A 3) 极配置 :. 3 极 ( 包括接极 ) 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-035 4) 型式承認番號 41-22318 獲証日期 : 平成 12 年 8 月 29 日 ( 最早認証時間 : 平成 5 年 ) 型式試驗規格 125V, 7A. 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :3~7A 3) 极配置 :. 3 极 ( 包括接极 ) 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-035. 5) 型式承認番號 41-23743 獲証日期 : 平成 12 年 7 月 25 日 (. 最早獲証日期 : 平成 4 年 ) 型式試驗規格 125V, 7A Prepared by Tonyfeng Page:63 / Total Page:250 Issued Data: 03/06/24

型式區分 : 1) 額定電壓 :125V 2) 額定電流 :3~7A 3) 极配置 :.. 2 极 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ) 5) 銅片插入構造 (Blade receiving construction): 兩面接觸 (Double side connecting) 6) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 7) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7)Fuse 安裝 : 無 8) 開關 : 無 9) 電線 (Cable): 有 (Provided) 10) 電線夾緊件 (cord grip, 線箍 ): 無 11) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-016, JS-602, JS-013B 6) 型式承認番號 41-25007, 獲証日期 : 平成 9 年 1 月 21 日型式試驗規格 125V, 12A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :10~15A 3) 极數 :3 极 ( 包括接极 ) 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 無 8) 成型方式 : ㆒体化 9) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-023R, JS-023L 7) 型式承認番號 41-25398 獲証日期 : 平成 9 年 8 月 8 日型式試驗規格 125V, 7A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :3~7A 3) 极配置 : 2 极 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-120RB, JS-120RS, JS-120S 8) 型式承認番號 41-25399 獲証日期 : 平成 9 年 8 月 8 日型式試驗規格 125V, 15A. 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :7~15A 3) 极配置 : 2 极 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). Prepared by Tonyfeng Page:64 / Total Page:250 Issued Data: 03/06/24

5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-120RB, JS-120RS, JS-120S, JS-120RN 9) 型式承認番號 41-25575 獲証日期 : 平成 9 年 10 月 31 日型式試驗規格 125V, 15A. 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :10~15A 3) 极數 :3 极 ( 包括接极 ) 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 無 8) 成型方式 : ㆒体化 9) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-024 10) 型式承認番號 41-25921 獲証日期 : 平成 10 年 5 月 7 日型式試驗規格 125V, 7A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :3~7A 3) 极配置 : 2 极 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-120G 11) 型式承認番號 41-25922 獲証日期 : 平成 10 年 5 月 7 日型式試驗規格 125V, 15A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :7~15A 3) 极配置 : 2 极 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-120G Prepared by Tonyfeng Page:65 / Total Page:250 Issued Data: 03/06/24

12) 型式承認番號 41-26078. 獲証日期 : 平成 10 年 7 月 28 日型式試驗規格 125V, 3A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :1~3A 3) 電源側接線形狀 : 片型 ( 含 Pin). 4) 負荷側接線形狀 : 片型 ( 含 Pin). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material) 6) 開關 : 無 7) 間引出線 ( 包括間出口線用端子 ): 有周氏產品編號 :JS-047 13) 型式承認番號 41-26079. 獲証日期 : 平成 10 年 7 月 28 日型式試驗規格 125V, 8A. 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :7~10A 3) 電源側接線形狀 : 片型 ( 含 Pin). 4) 負荷側接線形狀 : 片型 ( 含 Pin). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material) 6) 開關 : 無 7) 間引出線 ( 包括間出口線用端子 ): 有周氏產品編號 :JS-047 14) 型式承認番號 41-26117 獲証日期 : 平成 10 年 8 月 7 日型式試驗規格 125V, 15A. 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :10~15A 3) 极配置 : 2 极 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 無 8) 電源接線 ( 限于多功能分支 (Multifilament Tap) 場合 : Cab tyre cable or cord 9) 電線和器具㆒体成型 : 是 10) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-046. 15) 型式承認番號 41-26124 獲証日期 : 平成 10 年 8 月 25 日型式試驗規格 125V, 7A Prepared by Tonyfeng Page:66 / Total Page:250 Issued Data: 03/06/24

型式區分 : 1) 額定電壓 :125V 2) 額定電流 :3~7A 3) 极數 :2 极 ( 包括接极 ) 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 無 8) 電線與器具㆒体成型 : 非㆒体 9) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-050. 16) 型式承認番號 41-26128 獲証日期 : 平成 10 年 8 月 28 日型式試驗規格 125V, 3A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :3A 及以 3) 极配置 : 2 极 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-110, JS-120. 17) 型式承認番號 41-26172 獲証日期 : 平成 10 年 9 月 16 日型式試驗規格 125V, 3A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :3A 及以 3) 极數 :2 极 ( 包括接极 ) 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 無 8) 電線與器具㆒体成型 : 是 9) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :SP-605 18) 型式承認番號 41-26204 獲証日期 : 平成 10 年 10 月 2 日型式試驗規格 125V, 15A, 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :10~15A 3) 极配置 :. 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插板 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). Prepared by Tonyfeng Page:67 / Total Page:250 Issued Data: 03/06/24

7) 開關 : 無 8) 電源接線 ( 限于多功能分支 (Multifilament Tap) 場合 : Cab tyre cable or cord 9) 電線和器具㆒体成型 : 非㆒體成型 10) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-049. 19) 型式承認番號 41-26292 獲証日期 : 平成 10 年 12 月 1 日型式試驗規格 125V, 15A 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :10~15A 3) 极配置 : 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插板 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 有 8) 電源接線 ( 限于多功能分支 (Multifilament Tap) 場合 : Cab tyre cable or cord 9) 電線和器具㆒体成型 : 非㆒體成型 10) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-048 20) 型式承認番號 41-26720 獲証日期 : 平成 11 年 8 月 27 日型式試驗規格 125V, 12A. 型式區分 1) 額定電壓 :125V 2) 額定電流 :10~15A 3) 极配置 : 2 极 4) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 尾插 ), 螺絲固定式除外. 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 開關 : 無 8) 電線和器具㆒体成型 : ㆒体成型. 9) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 : JS-015 21) 型式承認番號 41-27211 獲証日期 : 平成 12 年 7 月 18 日型式試驗規格 250V, 15A( 為何 JET 合格報告与通產省證書有差异?) 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :7~15A 3) 极配置 : - - 2 极 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. Prepared by Tonyfeng Page:68 / Total Page:250 Issued Data: 03/06/24

8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏編號 : JS-008 22) 型式承認番號 41-27237 獲証日期 : 平成 12 年 7 月 25 日型式試驗規格 250V, 20A. ( 為何 JET 合格報告与通產省證書有差异?) 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :15~20A 3) 极配置 : 2 极 ( 含接极 ) 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏編號 : JS-009 23) 型式承認番號 41-27353 獲証日期 : 平成 12 年 10 月 3 日型式試驗規格 125V, 20A. 型式區分 : 1) 額定電壓 :125V 2) 額定電流 :15~20A 3) 极配置 : 4) 銅片連接方法 (Blade attachment method): 不可拆線 (Non-rewirable). 5) 主絕緣材料 (Main Insulation Material): 合成樹脂 (Plastic material). 6) 外部材料 (Enclosure Material): 合成樹脂 (Plastic material). 7) 連接方式 (Method of connection): 插入 (Plug-in) 型 ( 插頭 ), 螺絲固定式除外. 8) 防水 (Waterproofing) 結構 : 不防水 (No treated with waterproofing) 周氏產品編號 :JS-130 24) 合格書番號 : JET1206-43001-1001 獲証日期 : 平成 13 年 8 月 24 日 ( 最早認証時間 : 平成 6 年 ) 型式試驗規格 125V, 7A, 型式區分 : 125V, 3~7A, 2 极周氏產品編號 :JS-120, JS-120N, JS-120RU 25) 合格書番號 : JET1206-43001-1002 獲証日期 : 平成 13 年 9 月 4 日 ( 最早認証時間 : 平成 6 年 ) 型式試驗規格 125V, 12A, 型式區分 : 125V, 7~15A, 2 极周氏產品編號 :JS-120, JS-120N, JS-120RU 2.2 F280 PVC 絕緣電線類 : 標準 : JIS C3306-1987 Polyvinyl Chloride Insulated Flexible Cords Prepared by Tonyfeng Page:69 / Total Page:250 Issued Data: 03/06/24

JIS C3312-1987 600V Grade polyvinyl Chloride Insulated and Sheathed Portable Power Cables (VCT 線材依照此標準設計 ) 根据型式區分 ( 即按証書區分 ), 周氏共用 7 線材認証. 1) 型式承認番號 12-8210 獲証日期 : 平成 12 年 7 月 14 日 ( 最早認証時間為 : 平成 5 年 ) 型式試驗規格 2X1.25mmsq 型式區分 : 1) 絕緣體主材料 : PVC 混合物, 2) 外裝主材料 : PVC 混合物 3) 導體種類 : A 類 4) 線心構造 (Core construction): 同㆒ (Each core same) 5) 耐震性 : 無 6) 金屬制導體補強線 : 無周氏產品編號 :VCTF, VCTFK 2) 型式承認番號 12-8211 獲証日期 : 平成 12 年 7 月 14 日 ( 最早認証時間為 : 平成 5 年 ) 型式試驗規格 2X1.25mmsq 型式區分 : 1) 絕緣體主材料 : 耐熱 PVC 混合物 2) 外裝主材料 : 耐熱 PVC 混合物 3) 導體種類 : A 類 4) 線心構造 (Core construction): 同㆒ (Each core same) 5) 耐震性 : 無 6) 金屬制導體補強線 : 無周氏產品編號 :HVCTFK, HVCTF ( 注 : 1993 年 4 月申請 HVCTF 時, 來往信件曾注明溫度等級為 80 度, 應是錯誤的, 正確的應為 75 度, 而 VCTF 溫度等級為 60 度, 可以參考標準的高溫絕緣電阻測試的溫度要求.) 3) 型式承認番號 12-9025 獲証日期 : 平成 10 年 8 月 14 日型式試驗規格 :2 芯平行線型式區分 : 1) 絕緣體主材料 : PVC 混合物 2) 外裝 : 無 3) 導體種類 : A 類周氏產品編號 :TINSEL wire 4) 型式承認番號 12-9835 獲証日期 : 平成 13 年 9 月 27 日 ( 最早認証時間為 : 平成 6 年 ) 型式試驗規格 2.0mmsq 型式區分 : 1) 導體截面 8.0Mmmsq 以. 2 絕緣體主材料 : PVC 混合物 3) 外裝主材料 : PVC 混合物 4) 線心 : 2 芯以 5) 線心構造 (Core construction): 圓形 Prepared by Tonyfeng Page:70 / Total Page:250 Issued Data: 03/06/24

6) 耐震性 : 無 7) 金屬制導體補強線 : 無周氏產品編號 : VCT 5) 合格書番號 JET1206-12005-1001 獲証日期 : 平成 13 年 9 月 27 日 ( 最早認証時間為 : 平成 6 年 ) 型式試驗規格 2.0mmsq 型式區分 : 1) 絕緣體主材料 : 其他 ( 通用 PVC) 2) 導體種類 : A 類 3) 線芯構造 ( 單支導體 PVC 線情況除外 ): 同㆒ (Each core same) 周氏產品編號 :VSF 注 : HVSF( 已于取消此認証, 最早認証時間平成 6 年 ) 6) 合格書番號 JET1206-12011-1001 獲証日期 : 平成 13 年 11 月 10 日 ( 最早認証時間為 : 平成 6 年 ) 型式試驗規格 2X2.0mmsq 型式區分 : 1) 絕緣體主材料 : 其他 ( 通用 PVC) 2) 導體種類 : A 類 3) 線芯構造 ( 單支導體 PVC 線情況除外 ): 同㆒ (Each core same) 周氏產品編號 :VFF 7) 合格書番號 JET1206-12011-1002 獲証日期 : 平成 13 年 11 月 9 日 ( 最早認証時間為 : 平成 6 年 ) 型式試驗規格 2X2.0mmsq 型式區分 : 1) 絕緣體主材料 : 耐熱 PVC 混合物 2) 導體種類 : A 類 3) 線芯構造 ( 單支導體 PVC 線情況除外 ): 同㆒ (Each core same) 周氏產品編號 :HVFF 2.3 F743 橡膠絕緣電線類 : 標準 : JIS C3301-1987 Rubber Insulated Flexible Cords 根据型式區分 ( 即按証書區分 ), 周氏共用 4 种橡膠線材認証, 具體如 : 1) 型式承認番號 11-5087 獲証日期 : 平成 13 年 3 月 13 日型式試驗規格 2X2.0mmsq 型式區分 1) 絕緣體主材料 : 烯烯混合物 (ethylene proplene, 橡膠 ). 2) 外部編織 : 無 3) 導體種類 : A 類 3) 線芯構造 ( 單支導體橡膠線情況除外 ): 同㆒ (Each core same) 4) 石棉纖維編織 : 無周氏產品編號 :EPPFF, EPFF, EPRF Prepared by Tonyfeng Page:71 / Total Page:250 Issued Data: 03/06/24

2) 型式承認番號 11-5096 獲証日期 : 平成 13 年 3 月 27 日型式試驗規格 2X2.0mmsq 型式區分 1) 絕緣體主材料 : 氯磺化聚烯 (Chlorosulfonated polyethylene). 2) 外部編織 : 無 3) 導體種類 : A 類 3) 線芯構造 ( 單支導體橡膠線情況除外 ): 同㆒ (Each core same) 4) 石棉纖維編織 : 無周氏產品編號 :HHFF( 用 CPE 絕緣 ) 3) 型式承認番號 11-5099, 獲証日期 : 平成 13 年 3 月 30 日型式試驗規格 2X2.0mmsq 型式區分 1) 絕緣體主材料 : 烯烯混合物 (ethylene proplene, 橡膠 ). 2) 外裝主材料 : 氯 ㆓烯橡膠混合物 (Chloroprene, 氯橡膠 ). 3) 導體種類 : A 類 4) 線芯構造 : 同㆒ (Each core same) 5) 耐震性 : 無 6) 金屬制導體補強線 : 無周氏產品編號 :PNCTFK, PNCTF ( 用 CPE 作外皮 ) 4) 型式承認番號 11-5108 獲証日期 : 平成 13 年 7 月 10 日型式試驗規格 2X2.0mmsq 型式區分 1) 絕緣體主材料 : 氯 ㆓烯橡膠混合物 (Chloroprene, 氯橡膠 ). 2) 外部編織 : 無 3) 導體種類 : A 類 3) 線芯構造 ( 單支導體橡膠線情況除外 ): 同㆒ (Each core same) 4) 石棉纖維編織 : 無周氏產品編號 :NNFF, NRF?, NFF? ( 用 CPE 絕緣 ) 3. F-Mark 認証產品周氏獲得 F-Mark 認証電線產品都是㆒般電線 (Equipment wire), 是根據電器用品部品 / 材料任意登入制度 (CMJ-Optional Registration System for Components and Materials used in Electrical Appliances) 在日本進行登錄, 登錄是根據型式區分來進行的. F-mark 登錄證明書的有效期是沒有規定的, 是通過定期工廠調查 (Periodic Factory Inspection) 來保證其有效性, 工廠調查由 JQA 負責執行. 3.1 型式區分 A: Number of Conductors Classification: 1---1 2---2 to 7 3---8 or more B: Cross sectional Area of Conductor Prepared by Tonyfeng Page:72 / Total Page:250 Issued Data: 03/06/24

Classification: C(C1&C2): 1---Less than or equal to 0.13sqmm(AWG26) 2---Exceeding 0.13sqmm(AWG26) and less than or equal to 0.5mmsq(AWG20) 3--- Exceeding 0.5mmsq(AWG20) C1: Insulation material Classification: 1---Polyvinyl chloride (semi-hard) 3---Cross-linked polyvinyl chloride 5---Cross-linked polyethylene 7---Chloroprene rubber 9---Silicon rubber 11 Other C2: Insulation material Classification: 1---Polyvinyl chloride 3---Fluororesin 5---Synthetic rubber D: Insulation thickness Classification: E: Inner sheath 1---Less than or equal to 0.6mm 2---Polyvinyl chloride (soft) 4---Polyethylene 6---Fluororesin 8---Ethylene propylene rubber 10---Chlorinated polyethylene rubber 2---Polyethylene 4---Natural rubber 6---Other 2---Exceeding 0.6mm and less than or equal to 1.2mm 3---Exceeding 1.2mm Classification: F: Shielding G 1---With Classification: 1---With Sheath material Classification: 1---Polyvinyl chloride (semi-hard) 3---Cross-linked polyvinyl chloride 5---Cross-linked polyethylene 7---Chloroprene rubber 9---Silicon rubber 11---Glass braiding H: Sheath thickness 2---Without 2---Without 2---Polyvinyl chloride (soft) 4---Polyethylene 6---Fluororesin 8---Ethylene propylene rubber 10---Chlorinated polyethylene rubber 12---Other Prepared by Tonyfeng Page:73 / Total Page:250 Issued Data: 03/06/24

Classification: 1---Less than or equal to 0.6mm 2---Exceeding 0.6mm and less than or equal to 1.2mm 3---Exceeding 1.2mm I: Color of insulation. Classification: 1---Light Color ((semi) transparent, white, yellow, gray, pink light blue (water blue), red, orange, yellow green) 2---Dark Color (black, dark gray, dark brown, blue, purple, green, brown) 3---Mixed Color J: Outer diameter. Classification: K: Inner diameter. 1---Less than or equal to 6mm 2---Exceeding 6mm and less than or equal to 12mm 3---Exceeding 12mm Classification: 3.2 產品登錄番號 1---Less than or equal to 3mm 2---Exceeding 3mm and less than or equal to 6mm 3---Exceeding 6mm and less than or equal to 10mm 4---Exceeding 10mm 周氏登錄番號有 4 個, 分別是 : F-CEE1-001, F-CEE1-002, F-CEE1-003, F-CEE1-004( 由 JMI 和 JQA 各發㆒份, 型式不同 ) 產品具体分類如 : 1) 登錄番號 F-CEE1-001( 由 JMI 發出 ) 登錄日期 : 平成 5 年 6 月 4 日型式區分 : A B C D E F G H I J K 備注 ( 周氏產品 ) 1 1 2 1 2 2 - - 1 - - UL1007: 32,30,28,26AWG Light Color 1 1 2 1 2 2 - - 2 - - UL1007: 32,30,28,26AWG Dark Color 1 2 2 1 2 2 - - 1 - - UL1007: 24,22,20AWG Light Color 1 2 2 1 2 2 - - 2 - - UL1007: 24,22,20AWG Dark Color 1 3 2 1 2 2 - - 1 - - UL1007: AWG>20 Light Color 1 3 2 1 2 2 - - 2 - - UL1007: AWG>20 Dark Color 2) 登錄番號 F-CEE1-002( 由 JMI 發出 ) 登錄日期 : 平成 5 年 6 月 4 日型式區分 : A B C D E F G H I J K 備注 ( 周氏產品 ) 1 3 2 2 2 2 - - 1 - - UL1015 AWG>20&VSF>0.5mmsq Light Color Prepared by Tonyfeng Page:74 / Total Page:250 Issued Data: 03/06/24

1 3 2 2 2 2 - - 2 - - UL1015 AWG>20&VSF>0.5mmsq Dark Color 1 2 2 2 2 2 - - 1 - - UL1015 26<AWG<=20&VSF=0.5mmsq Light Color 1 2 2 2 2 2 - - 2 - - UL1015 26<AWG<=20&VSF=0.5mmsq Dark Color 3) 登錄番號 F-CEE1-003( 由 JMI 發出 ) 登錄日期 : 平成 5 年 6 月 4 日型式區分 : A B C D E F G H I J K 備注 ( 周氏產品 ) 2 2 2 1 2 2 2 2 1 - - UL2464 26<AWG<=20, 2C~7C, Light Color 4) 登錄番號 F-CEE1-004( 由 JMI 發出 ) 登錄日期 : 平成 5 年 6 月 30 日型式區分 : A B C D E F G H I J K 備注 ( 周氏產品 ) 2 3 2 2 2 2 - - 1 - - VFF, HVFF conductor section area>0.5mmsq Light Color 2 3 2 2 2 2 - - 2 - - VFF, HVFF conductor section area>0.5mmsq Dark Color 5) 登錄番號 F-CEE1-004( 由 JQA 發出 ) 登錄日期 : 平成 9 年 5 月 23 日型式區分 : A B C D E F G H I J K 備注 ( 周氏產品 ) 2 3 2 2 2 2 2 2 1 - - VCTF,VCTFK,HVCTF,HVCTFK Light Color 2 3 2 2 2 2 2 2 2 - - VCTF,VCTFK,HVCTF,HVCTFK Dark Color 4. 日本產品認証費用問題 : 1) 1993 年 7 月由 TAYA 公司代理申請 VCTF1.25sqmm+Plug 和 VCTF1.25sqmm+Connector 時費用如 : Inspection fee to VCTF1.25sqmm+Plug J 153100 Inspection fee to VCTF1.25sqmm+Connector J 259800 Banking charge J 1912 2) 1993 年 7 月由 TAYA 公司代理申請 F-mark 時費用如 : F-mark testing fee J 24600 Registration fee J 5100 Banking charge J 31612 3) 1993 年 11 月 F-mark 進行定期工廠調查時費用如 : F-mark factory inspection fee J 51500 Travel expensive J 9110 4) 1993 年 4 月申請 VCTF 和 HVCTF 線材的 T-mark 認証時費用如 : T-mark application fee for VCTF2X0.75sqmm J 262500 Prepared by Tonyfeng Page:75 / Total Page:250 Issued Data: 03/06/24

T-mark application fee for HVCTF2X0.75sqmm J 262500 5) 1993 年 1 月申請 1015 F-mark 認証時費用如 : Inspection fee J 110000 Application fee J 16700 6) 1992 年 11 月申請 HVFF 的 T-mark 認証時費用如 : Application fee 7) US$2557 JQA Registration maintenance fee: J 22600 (From 2003.04.01~2004.03.31) Periodical Factory Inspection under Optional Registration System for Components and Materials used in Electrical Appliance (CMJ) Foreign Inspection Institutions Entrusted Periodical factory Inspection in 2003. CHINA: CQC(China Quality Certification Centre) ETC(Electonics Testing Centre Taiwan) Prepared by Tonyfeng Page:76 / Total Page:250 Issued Data: 03/06/24

Item 6. 新加坡 PSB 認証. 1. 術語名詞 : PSB Singapore Productivity and Standard Board( 新加坡生產力与標準准局 ) CPS Singapore Consumer Protection (safety requirement) registration Scheme CAB Conformity Assessment Body. MRA Mutual Recognition Agreement SAC Singapore Accreditation Council( 新加坡認可委員會 ) COC--Certificate of Conformity 是根據 Singapore Consumer Protection (Safety Requirements) Registration Scheme 的規則進行產品注冊, 注冊時必需提交 CAB 出具的 PSB Corporation Pte Ltd( 新加坡認証有限公司 ) 是新加坡 PSB 的㆒個新生機构, 是 2. 注冊流程 : PSB 授權許可的首家認証機构, 2001 年 4 月 1 日成為 PSB 的分支機構, 是新加坡體系認証的主導者, 是基于國家, 國際及行業標准如 ISO9000, ISO14000 和 QS9000 等進行專業評估, 審核組織管理体系的認証机构. 該組織已在 SAC 注冊, 請見如网址 : http://www.psbcert.com/psb/chinese/msc-cp-useofcertificationmarks.html Only one part in the chain of supply of the controlled goods in Singapore needs to register the controlled goods with the Safety Authority (Spring Singapore) Flow chart: 1) Supplier applies to Safety Authority to be a Registered Supplier 2) Registered Supplier submits controlled goods to CAB (Local) or CAB(Foreign-MRA) for certification 3) CAB (Local) or CAB (Foreign-MRA) issues COC to Registered Supplier after certifying the Controlled goods 4) Registered Supplier submits COC to Safety Authority for registration of certified Controlled goods 5) Registered Supplier commences supply of the registered goods. 新加坡對于控制產品需要進行注冊, 對於非控制產品也需在 Safety Authority 進行注冊. COC 屬於新加坡進行口商, 有效期為 3 年, 測試報告屬於制造商, 制造商需要授權進口商使用其測試報告進行 CPS 注冊. 另外 COC 的復印件需保存在制造商處, 以便在產品表面印 Certification Number. 在网址 http://www.safety.org.sg/ 的 Register of Registered Controlled Goods 清單可以看到 CHAU S 商標對應產品的 Model Number 和進口商的 Registration Number 及 Registered Date. 3. 獲得認証產品周氏有如產品可以進入新加坡市場, 但必需通過相應的新加坡進口商來出口產品. Trade Name Model Number Registration Number Registered Date CHAU'S CS-006 CPA HHE PLC 030382-00 2003/4/24 CHAU'S BS-01 CPA SKO PLR 021240-00 2002/6/13 Prepared by Tonyfeng Page:77 / Total Page:250 Issued Data: 03/06/24

Registered Control Goods: CS-06----3-pin 15-Ampere plug (Round Type) 1) BS-01 3A, 5A, 10A, 250V ~ 配線 : BS-01----3-pin 13-Ampere plug (Rectangle Type) 3A H05VVH2-F 2X0.75sqmm(Gray, White), H05VV-F 3X0.75sqmm(Gray, White, Black) 5A--H05VV-F 3X0.75mmsq(Light gray) 10A--H05VV-F 3X1.0sqmm(Light gray) 新加坡進口商 : 2) CS-006 15A, 250V ~ 配線 : H05VV-F 3G1.5sqmm( 未指定顏色 ) 新加坡進口商 : 4. 新加坡認証產品的祥細情況. 1. BS-01 3A, 5A, 10A, 250V ~ Stocko Electronics Asia Pacific Pte Ltd. Hitachi Home Electronics Asia (S) Pte Ltd. 1.1 PSB test report No. 30S004849/LKM/PKS STOCKO 于 2001.01.11 獲得 PSB test report ( 由 PSB 的 Electrical & Electronics Test Center 發出 ). 測試確認的目的 (Purpose of Verification) Application for registration with Consumer Protection (Safety Requirement) Scheme. 產品名稱 : Non-rewirable plug. Brand: Model: CHAUS BS-01 Type: Non-rewirable, rough use, resilient and sleeved pins fused plug with 3 Color: cores 1.0sqmm and 3 cores 0.75sqmm flexible cords. Black Rating: 10A & 5A, 250V ~ Cable: Chau s H05VV-F 3X1.0sqmm & H05VV-F 3X0.75mmsq. Manufacturer: Chau s Electrical co. ltd. Method of test: Singapore Standard 145 Part1: 1997, Specification for rewirable and Results of verification: non-rewirable 13A fused plugs. Based on BSI test report were submitted to PSB for verification, the verification test results showed that they were done in compliance with the Singapore Standard 145 Part1: 1997. 由于測試報告指定了產品的顏色為 Black, 但 STOKO 需要在新加坡銷售 Light gray 產品, 而不需銷售 Black 產品, 故在 2001.05.04 日再次獲得㆒份補充測試報告 (Supplementary test report, 由 PSB 的 Switchgear & Accessories Test Group 發出 ), 測試報告編號為 55S00104/LKM/PKS. 它是 2001.01.11 日發出的 PSB Test Report Prepared by Tonyfeng Page:78 / Total Page:250 Issued Data: 03/06/24

30S0004849 的補件. 補充內容是將產品顏色更改為 Light gray 並且在插頭標識 SS145/A, 報告同時指出了 Fuse 為 Bussmann 品牌的 5A 和 10A fuse. 1.2 PSB test report No. 55S02554/LKM/PKS STOCKO 于 2002.01.30 獲得 PSB test report ( 由 PSB 的 Switchgear & Accessories Test Group 發出 ). 測試確認的目的 (Purpose of Verification) Application for registration with Consumer Protection (Safety Requirement) Scheme. 產品名稱 : Non-rewirable plug. Brand: CHAUS Model: BS-01 Type: Non-rewirable, rough use, resilient and sleeved pins fused plug with 2 cores 0.75sqmm and 3 cores 0.75sqmm flexible cords. Color: Gray and White Rating: 3A, 250V ~ Cable: Chau s H05VVH2-F 2X0.75sqmm & H05VV-F 3X0.75mmsq. Manufacturer: Chau s Electrical co. ltd. Method of test: Singapore Standard 145 Part1: 1997, Specification for rewirable and non-rewirable 13A fused plugs. Results of verification: Based on BSI test report were submitted to PSB for verification, the verification test results showed that they were done in compliance with the Singapore Standard 145 Part1: 1997. 由于測試報告指定了產品的顏色為 Gray and White, 但 STOKO 還需要在新加坡銷售 Black 產品 ( 配線為 H05VV-F 3X0.75sqmm), 故在 2002.05.23 日再次獲得㆒份補充測試報告 (Supplementary test report, 由 PSB 的 Switchgear & Accessories Test Group 發出 ), 測試報告編號為 55S020427/LKM/PKS. 它是 2002.01.30 日發出的 PSB Test Report 55S02554 的補件. 補充內容為將增加產品顏色 Black, 並且在插頭附加標識 FITTED WITH BS1362 3A FUSE. 1.3 COC(Certificate of Conformity) Stocko 于 2002.06.13 日獲得 COC, 有效期至 2005.06.12. Certificate Number: CPA SKO PLR 021240-00 Description of controlled goods: 3-pin Non-Rewirable 10A, 5A, 3A Fused Plug with flexible cord. Trade Name: CHAU S Model Number: BS-01 Country where controlled goods are likely to be manufactured by: CHINA Test report number: Prepared by Tonyfeng Page:79 / Total Page:250 Issued Data: 03/06/24

30S0004898/LKM/PKS, 55S00104/LKM/PKS, 55S02554/LKM/PKS 55S020427/LKM/PKS, 241/000184, 241/005022, 241/005167 Testing laboratory: PSB Corporation Pte Ltd & BSI Product Certification. Tested according to: SS145 Part 1: 1997 2. CS-006 15A, 250V ~ 2.1 PSB test report No. 55S021915/ASY/PKS Hitachi 于 2003.01.28 獲得 PSB test report ( 由 PSB 的 Switchgear & Accessories Test Group 發出 ). 測試確認的目的 (Purpose of Verification) Application for registration with Consumer Protection (Safety Requirement) Scheme. Brand: Model: Type: CHAU S CS-006 Rating: 15A, 250V ~ Cord size: Non-rewirable moulded plug 1.5sqmm Manufacturer: Chau s Electrical co. ltd. Method of test: SS472: 1999, SS241: 1996 2.2 COC (Certificate of Conformity) Hitachi 於 2003.04.24 日獲得 COC, 有效期至 2006.04.23. Certificate Number: CPA HHE PLR 030328-00 COC 內容如 : Description of controlled goods: 3-pin Non-Rewirable 15A Plug with flexible cord. Trade Name: Model Number: CHAU S CS-006 Country where controlled goods are likely to be manufactured by: CHINA Test report number: 55S021915/ASY/PKS Testing laboratory: PSB Corporation Pte Ltd Tested according to: SS472: 1999 Prepared by Tonyfeng Page:80 / Total Page:250 Issued Data: 03/06/24

Item 7. 阿根廷 (Argentina) 產品認証. 1. 術語名詞 IRAM---( 西班牙文 Instituto Argentino de Racionalización de Materiales), is a civil, non-profit making association, founded in 1935. 它參于標準的制定及體系或產品認証, 并與許多其它國家的認証機構有協議, 可以相互認可對方的測試結果. UL de Argentina S.R.L(AR-UL)---UL 的阿根廷分公司, 獨立的認証機構. S.I.C.&M---Argentina Secretariat of Industry, Commence and Mining ( 阿根廷工業, 商業, 礦業秘書處 ) OAA---Argentina Accreditation Organization( 阿根廷認可組織 ) Resolution92/98(92/98 決義 ) 2. 認証標識 Resolution 92/98 is very similar to the European Union s Low Voltage Directive (LVD) and covers most electrical and electronic equipment. Resolution92/98 s Essential Safety Requirements defined the safety hazards that manufacturer must take into account. For most part, they mirror those of the European Union s LVD. Compliance with Resolution92/98 established in threephase process. Now we are in the Phase 3 Process. In Phase 3, products must bear the recognized S.I.C&M compliance mark, the S- mark, along with the Trademark of the OAA-accredited Certification Organization that verified a product s technical documentation for compliance with Resolution 92/98. Certification is based on acceptance of valid test reports using IEC or IRAM standards and a factory inspection. IRAM 和 AR-UL 兩個認証机构都是 OAA 鑒定合格並且由 S.I.C &M 認可的組織. 由述兩個認証機构認証的產品需印有符合 S.I.C&M resolution92/98 規定的 Safety mark ( 即 S-mark) 以及相對應認証機构的 Trademark(IRAM-mark 或 AR-UL mark). 3. AR-UL 認証產品 License No.: 02AR31N01( 通過 UL de Argentina S.R.L 取得 ) File No. AR-1101 工厂代碼 : AR-16 Date of issue: 2002.06.09 Applicant: Manufacturer: Factory: Chau s Electrical Co., Ltd. (Hong Kong) Chau s Electrical Co., Ltd. (Hong Kong) Chau s Electrical Co., Ltd. (Dong Guan) Rating and principle characteristics: 10A, 250V~ Trade mark: Type reference: CHAU S CS016 & CS021 Prepared by Tonyfeng Page:81 / Total Page:250 Issued Data: 03/06/24

Product: Argentina Attachment Plug Cap Conformity with the standard: According to the test report: AR1011 V1 S1 IRAM2063 & IRAM2073 ( 注 AR-UL 于 2000 年 12 月獲得阿根廷政府批準可以使用 S-mark) 認証產品祥細描述. CS016 2pin plug 銅片壓接后需錫備案注塑料 R/C Plastic (QMFZ2), G-006 manufactured by Chaus. 備案銅片 : ASW50 manufactured by Kitani( 目前周氏未使用 ) WP1118-TX03 manufactured by Sumiko( 目前周氏大量使用, P/N: BL- SAA-10A-1) 備案配線 : CS021 3pin Plug H05VV-F 0.75mmsq, H03VVH2-F 0.75mmsq, H05VVH2-F 0.75sqmm H05VVH2-F 1.0sqmm 銅片壓接后需錫備案注塑料 R/C Plastic (QMFZ2), G-006 manufactured by Chaus. 備案銅片 : 備案配線 : 4. IRAM 認証產品 ASW50 manufactured by Kitani( 目前周氏未使用 ) WP1118-TX03 manufactured by Sumiko( 目前周氏大量使用, P/N: BL- SAA-10A-1) H05VV-F 0.75sqmm and 1.5sqmm License No.: DC-F-C96-001.1 ( 通過 IRAM 取得 ) Date of issue: 2002.01.22 License holder: Chau s Electrical Co., Ltd. Product: Two poles plug with earthing contact Main Characteristics: 20A, 250V~, Moulded on cord H05VV-F 3G1.5sqmm Type reference: Trade mark: CS-021A CHAU S Conformity with the standard: IRAM2073: 1996 This IRAM License has been granted on the basis of the License-Certificate-Report No. 2014161.01A issued by KEMA Prepared by Tonyfeng Page:82 / Total Page:250 Issued Data: 03/06/24

Item 8. 英國 BSI 產品認証 1. 術語名詞 BSI---British Standard Institution 英國標準機構. Kitemark BSI is proud of owning the Kitemark, and with good reason. It is the most well-known and respected product quality mark in the world. Regular UK consumer surveys tell us that 80% of the British public recognise the Kitemark as a symbol of quality and safety. What s more, 60% of them are prepared to pay a price premium for products that bear the Kitemark. 2. BSI 認証產品 BSI 認証產品共有 6 种, 分別為 BS-01,CE-605, CE-602, CE-608, CE-601, CE-508. A)License No.: KM41436 Issued date: 2002.11.22 Type: BS-01, 250V, rough use, non-rewireable plug to BS1363: Part 1: 1995 Cable fitted: H03VV-F 3X 0.75 VDE approved, BSI tested rating 6A H03VVH2-F 2X 0.75 VDE approved rating 6A H05V2V2-F 2X 0.75 BSI tested H05VV-F 2X 0.75 BSI tested rating 6A H05VV-F 2X1.0 BSI tested rating 10A H05VV-F 2X1.25 BSI tested rating 13A H05VV-F 3X 0.75 VDE approved, BSI tested rating 6A H05VV-F 3X1.0 VDE approved, BSI tested rating 10A H05VV-F 3X1.25 BSI tested rating 13A H05VVH2-F 2X 0.75 VDE approved rating 6A H05RN-F 3X1.0 VDE approved rating 10A H05RR-F 3X1.0 VDE approved rating 10A H05RR-F 3X1.5 VDE approved rating 13A H07RN-F 3X1.0 VDE approved rating 10A H07RN-F 3X1.5 VDE approved rating 13A B)License No.: KM51842 Issued date: 1999.08.11 Type: 1) Non rewireable connectors rated 0.2A CE-605, 250V, 0.2A, classⅡ, cold conditions, black In conformity with BS EN60320-1: 1996 plug amendment 1 Appliance Couplers Cable fitted: Prepared by Tonyfeng Page:83 / Total Page:250 Issued Data: 03/06/24

H03VH-Y 2X0.1 Approved by VDE Rating 0.2A 2) Non rewireable connectors rated 2.5A CE-602, 250V, 2.5A, classⅡ, cold conditions, black In conformity with BS EN60320-1: 1996 Appliance Couplers Cable fitted: H03VVH2-F 2X0.75 Approved by VDE Rating 2.5A H05VVH2-F 2X0.75 Approved by VDE Rating 2.5A 3) Non rewireable connectors rated 2.5A CE-608, 250V, 2.5A, classⅠ, cold conditions, black In conformity with BS EN60320-1: 1996 Appliance Couplers Cable fitted: H03VV-F 3X0.75 Approved by VDE Rating 2.5A H05VV-F 3X0.75 Approved by VDE Rating 2.5A 4) Non rewireable connectors rated 10A CE-601, 250V, 10A, classⅠ, cold conditions, black In conformity with BS EN60320-1: 1996 Appliance Couplers Cable fitted: C)License No.: KM51848 H05VV-F 3X0.75 BSI tested Rating 10A H05VV-F 3X1.0 BSI tested Rating 10A Note: Connectors fitted with 0.75sqmm cord are restricted to a cord length of less than 2m. Issued date: 2000.08.11 issue 2 Type: Cable fitted: 3. 聯絡方式 Contact Person: CE-508, 250V, 0.2A in conformity with BS4573: 1970 plug amendments 1, 2 and 3, 2-pin reversible plug (two pin non-rewireable shaver plug) H03VH-Y 2X0.1 Approved by VDE H03VVH2-F 2X0.75 Approved by VDE Tel: 44-1-442-230442 Fax: 44-1-442-231442 Mr. Kevan Bott E-mail: kevan.bott@bsi.org.uk Prepared by Tonyfeng Page:84 / Total Page:250 Issued Data: 03/06/24

Item 9 香港 HKSI 認証產品 1. 術語名詞 HKSI---the Hong Kong Safety Institute ltd 香港安全認証心. 2. 概況 HKSI 產品認証先由 ITS 公司測試, 測試 OK 后 HKSI 發証書, 證書包括 3 部分, 分別為 License, Certification Contract, Certification Report(Section A product description, Section B safety test report), 證書申請費 1000HK$, 確認和報告費 10100HK$, 檢證書年費 3300HK$, 另外, 生產廠商需簽署㆒份 Declaration of Conformity. 3. HKSI 認証產品 HKSI 認証產品其有 4 种, 分別為 CS-006, CS-004, BS-01, CE-508 License Number: L00049A Issue Date: 2000.05.26 Expiry Date: 2003.06.30 Product Category: Electrical Product Product Description: Type: 1) CS-006, 15A, 250V ~ Applicable standards: Non rewireable mains plug BS546: 1950+PD1752: 1953+PD4007:1960+PD4389: 1961 +AMD251; 1969+AMD2307: 1977+AMD4045: 1982+AMD5809: 1987 +AMD6144: 1989+Supplement No.1: 1960+Supplement No.2: 1987. Specification for safety requirements for two-pole and earthing pin plugs, socket-outlets and socket-outlet adaptors. Fitted cable: H05VV-F 3X 2.5 VDE Approved H05VV-F 3X 1.5 VDE Approved 2) CS-004, 5A, 250V ~ Applicable standards: Fitted cable: ( 同 CS-006) H05VV-F 3X 0.75 VDE Approved Appliance connector (Optional) CE-601 10A, 250V~, Provided with cord guard, VDE approved 3) BS-01, 13A Applicable standards: BS1363 Part1: 1995, 13A plugs, socket outlets, adaptors and connection units, part1. Specification for rewireable and non-rewireable 13A fused plugs. Fitted cable: Prepared by Tonyfeng Page:85 / Total Page:250 Issued Data: 03/06/24

H03VV-F 2X 0.75 VDE and/or BSI Approved rating 6A H03VV-F 3X 0.75 VDE and/or BSI Approved rating 6A H03VVH2-F 2X 0.75 VDE and/or BSI Approved rating 6A H05VV-F 2X 0.75 VDE and/or BSI Approved rating 6A H05VV-F 2X1.0 VDE and/or BSI Approved rating 10A H05VV-F 2X1.25 VDE and/or BSI Approved rating 13A H05VV-F 3X 0.75 VDE and/or BSI Approved rating 6A H05VV-F 3X1.0 VDE and/or BSI Approved rating 10A H05VV-F 3X1.25 VDE and/or BSI Approved rating 13A H05VVH2-F 2X 0.75 VDE and/or BSI Approved rating 6A Appliance connector (Optional) CE-601, CE-602 10A, 250V~, Provided with cord guard, VDE approved 4) CE-508, 0.2A, 250V ~ Non-rewireable plug for shavers Applicable standards: BS4573: 1970 Specification for 2 pin reversible plugs and shaver socket-outlets. Cable fitted: H03VH-Y 2X0.1 Approved by VDE H03VVH2-F 2X0.75 Approved by VDE Appliance connector (Optional) CE-605 0.2A, 250V~, Provided with cord guard, Approved by VDE 4. 聯絡信息. Contact Person: Ms. Mona Lee Tel: 2742-5638 Fax: 2743-8727 ( 注 : 2000 年 3 月, 增加 CE-605 花費 500HK$, 不包括測試費 ) Prepared by Tonyfeng Page:86 / Total Page:250 Issued Data: 03/06/24

Item 10. 德國 VDE 認証 1. 術語名詞 VDE Marks Licence 是由 VDE Testing and Certification Institute 發出 The VDE Testing and Certification Institute is accredited on a national and international level for the area of testing and certification of electrotechnical equipment, components and systems. Testing of electrotechnical products is conducted for safety, electromagnetic compatibility and other characteristics. The VDE Testing Institute was founded in the year 1920 in Berlin as an activity of the VDE Association. Since 1968 located in Offenbach am Main, the VDE Institute gained worldwide importance. The results of testing are evaluated scientifically and contribute to the development of electrotechnical standards. EU---European Union( 歐盟 ). COUNCIL DIRECTIVE 73/23/EEC It s a harmonization of the laws of Member States relating to Electrical Equipment designed for use within certain voltage limits. This directive has been amended by the following Council Directives: 1. 92/59/EEC of 29 June 1992 (General Product Safety); CE Marking 2. 93/68/EEC of 22 July 1993 (CE Marking directive). 字母 "CE" 是法文句子 "Conformité Européene" 的縮寫, 其意為 " 符合歐洲 ( 標準 )". CE 標記最初所使用的英文術語為 "EC Mark", 該術語于 1993 年簽署的歐洲盟產品指令第 93/68/EEC 號正式被術語 "CE Marking" 所取代. 現在, 所有的歐盟官方文件均使用 "CE Marking". 術語 "CE Mark" 有時也使用, 但是并非官方術語. ㆒個產品帶有 CE 標記意味著其制造商宣告 : 該產品符合歐洲的健康, 安全, 与環境保護之相關法律所規定的基本要求. 在實際, 這些法律多以所謂的產品指令 (Product Directives) 之方式而發布. 產品指令通常包含產品必須滿足的 " 基本要求 essential requirements" 或者 " 性能水平 performance levels" 与 " 協調標準 Harmonized Standards". 協調准指的是由若干歐洲標準局 (CEN, CENELEC 等 ) 所制定的具体技術范 ( 也称 : 歐洲標準 European Standards 或協調文件 Harmonization Documents). CEN- 歐洲標準委員會 CENELEC 歐洲電工技術標準委員會. ㆒個產品帶有 CE 標記也就是向歐盟盟國的官員表明 : 該品可以合法 Prepared by Tonyfeng Page:87 / Total Page:250 Issued Data: 03/06/24

進入歐盟統㆒市場. ㆒個產品帶有 CE 標記可以确保 : 該品可以自由在歐盟統㆒市場內流通. 隨著越來越多的產品指令進入實施階段, 越來越多的產品已經被化入必須帶有 CE 標記, 否則不准進入歐盟統㆒市場流通. Why is CE Marking called the "Passport to Europe" for non-eu products? The European Union's 'New Approach directives' are mandatory on all member countries to enact through national legislation. This legislation requires manufacturers to display CE Marking on their product, packaging and accompanying literature. Where a new approach directive is in force, it is (with few exceptions) an offence to place a product on the market without CE Marking. The manufacturer is legally responsible for ensuring that the product confirms to the requirements of the directive and for applying CE Marking. CE Marking is one important measure that the EU has adopted to establish the single market and foster economic development for the member states. The objective of the directives is to simplify the movement of goods into and within the EU. This may eventually lead to the free movement of goods throughout Europe as more and more European countries are expected to join the EU. The European Commission thus refers to the CE Marking as a "Passport" which allows products to be freely circulated within the EU single market. Often, consumers will consider CE Marking on a product as an indication of conformance to laid down minimum standards, and therefore a minimum level of quality which other products may lack. CE Marking is thus for many consumers a "Symbol of Quality." Being a manufacturer exporting to EU, if you have not got your products fixed with CE Marking, it is now time to invest in it. A CE Marking on your product will be more valuable than millions of dollars spent on TV advertising. Nowadays, it is not unusual to see some high-quality, even known brand, products have to appear in Second-hand Stores (which sells used products) or on streetvendor's Stands. Why? lack CE Marking! 2. VDE 認証產品概況. 已取得認證的產品分為 6 類, 分別為 : 1) Flexible cable(cord). 證書有 3 份, 型號有 9 個, VDE 發出 Marks Licence 的時同時發出了 EC Declaration of Conformity 文件. H05RR-F 2~5C, 0.75-2.5sqmm Prepared by Tonyfeng Page:88 / Total Page:250 Issued Data: 03/06/24

H05RN-F 2~3C, 0.75-1.0sqmm H03VH-Y H03VV-F 2X0.1sqmm 2~3C, 0.5~0.75sqmm H03VVH2-F 2C, 0.5~0.75sqmm H05VV-F 2C, 0.75~2.5 sqmm; 3C, 0.75-1.5 sqmm H05VVH2-F 2C, 0.75~1.0 sqmm H03RT-F 2C, 0.75-1.5mmsq; 3C, 0.75-1.0mmsq H07RN-F 2~5C, 1.0-2.5mmsq 2) Cord extension set, non-rewirable. 證書有 1 份, 型號有 1 個. CE-511/CE-604 3) Cord set 證書有 5 份, VDE 發出 Marks Licence 的時同時發出了 EC Declaration of Conformity 文件. CE-501/CE-601 CE-502/CS-001A CE-502/CE-601 CE-503/CE-602 CE-503/CE-605 4) Plug non-rewirable 證書有 9 份, 型號有 11 個. CE-501 straight cable entry CE-502, CE-502N angle cable entry CE-503 straight cable entry CE-503B straight cable entry CE-504 straight cable entry CE-510 straight cable entry CE-511 straight cable entry CE-512 angled cable entry CE-513 straight cable entry CE-513G straight cable entry 5) Connector, non-rewirable 證書有 7 份, 型號有 7 個, VDE 發出 Marks Licence 的時同時發出了 EC Declaration of Conformity 文件. CE-045 CE-601 CE-602, straight cable entry CE-605 Prepared by Tonyfeng Page:89 / Total Page:250 Issued Data: 03/06/24

CE-607 straight cable entry. CE-608 straight cable entry CS-001A, straight cable entry 6) Socket-outlet, non-rewirable, portable 證書有 1 份, 型號有 1 個 CE-604 對 VDE 發出的 EC Declaration of Conformity 文件的理解 : 這份文件的目的是協助制造商履行 CE-marking 的責任, 必需由在歐共体內的制造商合法代表, 即代理商或進行口商簽署之后與 Marks Licence ㆒ 起使用, 由此來表明產品符合歐洲 Low-Voltage Directive 73/23/EEC, 可以在產品及包裝印 CE-Marking. 我們可以在 Marks Licence 看到面㆒段話 : This Marks license is the basis for the EC Declaration of Conformity and the CE Marking by the manufacturer or his agent and shows the conformity with the said standards as defined by the EC Low-Voltage Directive 73/23/EEC including amendments. 3. 認証產品描述 3.1 Flexible cable(cord). 1) Marks Licence No.: 113035 (file ref: 17058-5150-004/30YGG) Issued date: 1998.08.13 updated 1999.03.24 Types: DIN VDE 0282-4(VDE 0282 Teil 4):1995-12; HD 22.4 S3: 1995 H05RR-F 2~5C, 0.75-2.5sqmm H05RN-F 2~3C, 0.75-1.0sqmm 2) Marks Licence No.: 113934 (file ref: 1705800-5140-005) Issued date: 1998.10.16 updated 2002.10.23 Types: DIN VDE 0281-5(VDE 0281 Teil 5):2002-09; HD 21.5 S3: 1994 + A1: 1999 + A2: 2001 H03VH-Y H03VV-F 2X0.1sqmm 2~3C, 0.5~0.75sqmm H03VVH2-F 2C, 0.5~0.75sqmm H05VV-F 2C, 0.75~2.5 sqmm; 3C,0.75-1.5 sqmm H05VVH2-F 2C, 0.75~1.0 sqmm 3) Marks Licence No.: 118150 (file ref: 17058-5150-004/32E8S) Prepared by Tonyfeng Page:90 / Total Page:250 Issued Data: 03/06/24

Issued date: 1999.03.25 updated 2000.12.04 Types: DIN VDE 0282-4(VDE 0282 Teil 4):2000-07; HD 22.4 S3: 1995+A1:1999 H03RT-F 2C, 0.75-1.5mmsq; 3C, 0.75-1.0mmsq H07RN-F 2~5C, 1.0-2.5mmsq 3.2 Cord extension set, non-rewirable. 1) Marks Licence No.: 40001171(File ref1705800-1572-0001/25436) Issued date: 2002.04.20 updated 2003.02.14 DIN VDE 0620-1(VDE 0620 Teil 1): 2002.01 Meet Appliance Safety Law ξ3 CE-511/CE-604 16A, 250V~ Number of poles: Two poles with earthing contact Kind of construction: DIN 49440/DIN 49441 R2 Degree of protection: 3.3 Cord set IP20 H05RR-F 3G 1.0mmsq(length max. 2m) H05RN-F 3G 1.0mmsq(length max. 2m) H07RN-F 3G 1.0mmsq(length max. 2m) H05RR-F 3G 1.5mmsq H07RN-F 3G 1.5mmsq 1) Marks Licence No.: 80616(File ref17058-1570-1007) Sum of annual fee units 50 Issued date: 1993.11.22 DIN EN60320-1 A1(VDE 0625-1 A2): 1993.03. DIN VDE 0626/06.88(EN 60799:1986) CE-501/CE-601 10A, 250V~ Prepared by Tonyfeng Page:91 / Total Page:250 Issued Data: 03/06/24

Number of poles: Two poles with earthing contact Kind of construction: Remarks; Plug type CE-501: DIN 49441-R2 Connector type CE-601: standard sheet C13 H05VV-F 3G 0.75mmsq H05VV-F 3G 1.0mmsq Plug type CE-501 approved under VDE-ref: 17058-1560-7001 Connector type CS-001A approved under VDE-ref; 17058-1550-7004 2) Marks Licence No.: 40002105(File ref1705800-1570-0010/a4009t) Sum of annual fee units 186 Issued date: 2002.06.27 DIN EN60799(VDE 0626): 1999.06; EN60799: 1998 DIN VDE 0620: 1992.05 DIN EN60320-1(VDE0625 Teil 1): 1997.07; EN60320-1:1996+A1:1996 DIN VDE60320-1/A2(VDE0625 Teil1/A2): 1998.10; EN60320-1/A2:1998 CE-502/CS-001A 10A, 250V~ Number of poles: Two poles with earthing contact Kind of construction: Remarks; Plug type CE-502: DIN 49441-R2 Connector type CS-001A: standard sheet C15 H05RR-F 3G 1.0mmsq Plug type CE-502 approved under VDE-ref: 1705800-1560-0001 Connector type CS-001A approved under VDE-ref; 1705800-1550-0013 3) Marks Licence No.: 80615(File ref17058-1570-1006) Sum of annual fee units 50 Issued date: 1993.11.22 DIN EN60320-1 A1(VDE 0625-1 A2): 1993.03. DIN VDE 0626/06.88(EN 60799:1986) Prepared by Tonyfeng Page:92 / Total Page:250 Issued Data: 03/06/24

CE-502/CE-601 10A, 250V~ Number of poles: Two poles with earthing contact Kind of construction: Remarks; Plug type CE-502: DIN 49441-R2 Connector type CE-601: standard sheet C13 H05VV-F 3G 0.75mmsq H05VV-F 3G 1.0mmsq Plug type CE-502 approved under VDE-ref: 17058-1560-1001 Connector type CS-001A approved under VDE-ref; 17058-1550-7004 4) Marks Licence No.: 80617(File ref17058-1570-1008) Sum of annual fee units 50 Issued date: 1993.11.22 DIN EN60320-1 A1(VDE 0625-1 A2): 1993.03. DIN VDE 0626/06.88(EN 60799:1986) CE-503/CE-602 2.5A, 250V~ Number of poles: Two poles with earthing contact Kind of construction: Remarks; Plug type CE-503: standard sheet 1 Connector type CE-602: standard sheet C7 H03VVH2-F 3G 0.75mmsq Plug type CE-503 approved under VDE-ref: 17058-1560-7002 Connector type CE-602 approved under VDE-ref; 17058-1550-7005 5) Marks Licence No.: 40000313(File ref1705800-1570-0009/10769) Sum of annual fee units 187 Issued date: 2002.02.20 DIN EN60799(VDE 0626): 1999.06; EN60799: 1998 DIN VDE 0620 Teil 101: 1992.05; EN50075:1990 Prepared by Tonyfeng Page:93 / Total Page:250 Issued Data: 03/06/24

DIN EN60320-1(VDE0625 Teil 1): 1997.07; EN60320-1:1996+A1:1996 DIN VDE60320-1/A2(VDE0625 Teil1/A2): 1998.10; EN60320-1/A2:1998 CE-503/CE-605 0.2A, 250V~ Number of poles: Two poles without earthing contact Kind of construction: Remarks; Plug type : standard sheet 1 Connector type : standard sheet C1 H03VH-Y 2X 0.1mmsq(Max. 2M) Plug type CE-503 approved under VDE-ref: 1705800-1560-0002 Connector type Ce-605 approved under VDE-ref; 1705800-1550-0010 3.4 Plug non-rewirable 1) Marks Licence No.: 080423(file ref 17058-1560-0001/F33/E) sum of annual fee units 953 Issued date: 1993.10.14 updated 1999.04.07 CE-501 straight cable entry CE-502, CE-502N angle cable entry 16A, 250V~(10A 250V DC) Number of poles: Two poles with dual earthing contact system Kind of construction: DIN 49441R2 Degree of protection: CE-501& CE-502 配線 H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75mmsq H05VV-F 3G 1.0mmsq H05VV-F 3G 1.5mmsq H03RT-F 3G 0.75mmsq H03RT-F 3G 1.0mmsq H05RR-F 3G 0.75mmsq ordinary accessories Prepared by Tonyfeng Page:94 / Total Page:250 Issued Data: 03/06/24

H05RR-F 3G 1.0mmsq H05RR-F 3G 1.5mmsq CE-502N 配線 H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75mmsq H05VV-F 3G 1.0mmsq H05VV-F 3G 1.5mmsq H03RT-F 3G 0.75mmsq H03RT-F 3G 1.0mmsq Material of the life part carriers a) Taller type B04, VDE file ref 15181-1560-1006 b) GEM, Dupont SK 6555FR. 2) Marks Licence No.:40000488(File ref1705800-1560-0002/a40237) sum of annual fee unit 698 Issued date: 2002.03.06 DIN VDE 0620 Teil 101:1992.05; EN50075:1990 DIN VDE 0620-1(VDE 0620 Teil 1): 2002.01 CE-503 straight cable entry 2.5A, 250V~ Number of poles: Two poles version without earthing contact Kind of construction: Standard sheet: 1 Degree of protection: Plug insert: ordinary H03VH-Y 2X 0.1mmsq(max. 2m) H03VV-F 2X 0.75mmsq H03VVH2-F 2X 0.5mmsq(max. 2m) H03VVH2-F 2X 0.75mmsq H05VVH2-F 2X 0.75mmsq Type: YS-02; Yih Suh Corp. Insulation material of plug insert: Nylon 66; Type : Mapex; Ginar Chemical. 3) Marks Licence No.:127104(File ref1705800-1560-0005/31ssk) sum of annual fee unit 326 Issued date: 2000.03.08 Prepared by Tonyfeng Page:95 / Total Page:250 Issued Data: 03/06/24

E DIN VDE 0624(VDE 0624 Teil 1):1999.09 CE-503B straight cable entry 2.5A, 250V~ Number of poles: Two poles version without earthing contact Kind of construction: Standard sheet: 1 Degree of protection: Plug insert: ordinary H03VVH2-F 2X 0.75mmsq Type: YS-02; Yih Suh Corp. Insulation material of plug insert: Nylon 66; Type : Ginar Chemical. 4) Marks Licence No.:40000141(File ref1705800-1560-0003/a40230) sum of annual fee unit 698 Issued date: 2002.02.04 updated 2002.12.19 DIN VDE 0620-1(VDE 0620 Teil 1): 2002.01 CE-504 straight cable entry 16A, 250V~ Number of poles: Two poles without earthing contact Kind of construction: Standard sheet DIN 49406-R Degree of protection: ordinary H03VVH2-F 2X 0.75mmsq H05VVH2-F 2X 0.75mmsq H05VVH2-F 2X 1.0mmsq H05VV-F H05VV-F 2X 0.75mmsq 2X 1.0mmsq Insulation material of plug insert: Crastin type: SK655FRNC010; Dupont Prepared by Tonyfeng Page:96 / Total Page:250 Issued Data: 03/06/24

5) Marks Licence No.: 40001389 (File ref1705800-1560-0004/13788) Sum of annual fee units 698 Issued date: 2002.05.07. DIN VDE 0620-1(VDE 0620 Teil 1): 2002.01 CE-510 straight cable entry 16A, 250V~ Number of poles: Two poles without earthing contact Kind of construction: Standard sheet: DIN 49406-R Degree of protection: Plug insert: ordinary H05VV-F 2X0.75mmsq H05VV-F 2X1.0mmsq H05RN-F 2X0.75mmsq H05RN-F 2X1.0mmsq H07RN-F 2X1.0mmsq GEM. Insulation material of plug insert: PBT Type Crastin SK655 FR; Dupont 6) Marks Licence No.:40001392 (File ref1705800-1560-0008/13787 Sum of annual fee units 884 Issued date: 2002.05.07 updated 2002.12.19 DIN VDE 0620-1(VDE 0620 Teil 1): 2002.01 CE-511 straight cable entry 16A, 250V~ Number of poles: Two poles with dual earthing contact system Kind of construction: Standard sheet: DIN 49441-R2 Degree of protection: ordinary H05RR-F 3G 1.0mmsq H05RR-F 3G 1.5mmsq Prepared by Tonyfeng Page:97 / Total Page:250 Issued Data: 03/06/24

Plug insert: H05RN-F 3G 0.75mmsq H05RN-F 3G 1.0mmsq H07RN-F 3G 1.0mmsq H07RN-F 3G 1.5mmsq 1) GEM, 2) B04..; Taller Insulation material of plug insert: 1) PBT Type Crastin SK655FR; Dupont 2) Approved under VDE-Ref: 15181-1560-0008. 7) Marks Licence No.:40001201(File ref1705800-1560-0007/12958) sum of annual fee unit 791 Issued date: 2002.04.23. DIN VDE 0620-1(VDE 0620 Teil 1): 2002.01 CE-512 angled cable entry 16A, 250V~ Number of poles: Two poles with dual earthing contact system Kind of construction: Standard sheet: DIN 49441-R2 Degree of protection: ordinary H03VV-F 3G 0.75mmsq H05RN-F 3G 0.75mmsq H05RN-F 3G 1.0mmsq H07RN-F 3G 1.0mmsq H07RN-F 3G 1.5mmsq Insulation material of plug insert: PBT; Type : Crastin SK655FR; Dupont 8) Marks Licence No.:131088(File ref1705800-1560-0006) sum of annual fee unit 512 Issued date: 2001.02.05 updated 2003.03.28 DIN VDE 0624-1(VDE 0624 Teil 1): 1999.09 CE-513 straight cable entry 16A, 250V~(10A 250V DC) Number of poles: Prepared by Tonyfeng Page:98 / Total Page:250 Issued Data: 03/06/24

Two poles Kind of construction: Standard sheet: DIN 49406-2-RA Degree of protection: IP44 H05RN-F 2X 0.75mmsq H05RN-F 2X 1.0mmsq 9) Marks Licence No.:40004162 (File ref1705800-1560-0009/18044) Sum of annual fee units 512 Issued date: 2002.11.21 DIN VDE 0620-1(VDE 0620 Teil 1): 2002.01 CE-513G straight cable entry 16A, 250V~ Number of poles: Two poles with dual earthing contact system Kind of construction: Standard sheet: DIN 49441-R2 and DIN DIN49441-2-AR2 Degree of protection: Plug insert: IP44 H05RN-F 3G 1.0mmsq GEM Insulation material of plug insert: PBT Type 4830-BK Chang Chun Plastic 3.5 Connector, non-rewirable 1) Marks Licence No.: 88823(File ref17058-1550-7009) Sum of annual fee units? Issued date: 1995.04.05 Type CE-045, 10A, 250V~ Two poles with earthing contact Rated temperature: max65 H05VV-F 3G0.75mmsq 2) Marks Licence No.: 77592(File ref17058-1550-7004) Sum of annual fee units 50 Issued date: 1993.10.27 Type CE-601, 10A, 250V~ Two poles with earthing contact Rated temperature: max65 H05VV-F 3G0.75mmsq Prepared by Tonyfeng Page:99 / Total Page:250 Issued Data: 03/06/24

H05VV-F 3G1.0mmsq 3) Marks Licence No.: 40003526(File ref1705800-1550-0005/a407k6) Sum of annual fee units 465 Issued date: 2002.10.10. DIN EN60320-1(VDE 0625 Teil 1): 2002.06; EN 60320-1:2001 CE-602, straight cable entry 2.5A, 250V~ Number of poles: Two poles without earthing contact Kind of construction: Standard sheet: C7 Insulation material: Remarks: H03VVH2-F 2X0.5mmsq(length max. 2m) PBT Type Crastin SK652 FR; Dupont Engineering Connectors without earthing contact shall be part of a cord set or interconnection cord set. 4) Marks Licence No.: 113078(File ref17058-1550-0010/310ex) Sum of annual fee units 465 Issued date: 2002.06.27. DIN EN60320-1(VDE 0625 Teil 1): 1997.07; EN 60320-1:1996+A1:1996 DIN EN60320-1/A2(VDE 0625 Teil 1/A2): 1998.10; EN 60320-1/A2:1998 CE-605 0.2A, 250V~ Number of poles: Two poles without earthing contact Type of construction: Standard sheet: C1 Option insert types: H03VH-Y 2X 0.1mmsq(max. 2m) 1. type 33.012; Taller Company 2. Chau s Prepared by Tonyfeng Page:100 / Total Page:250 Issued Data: 03/06/24

Remarks: Connectors without earthing contact shall be part of a cord set. 5) Marks Licence No.: 129657(File ref17058-1550-0012/328gn) Sum of annual fee units 465 Issued date: 2000.11.13 DIN EN60320-1(VDE 0625 Teil 1): 1997.07; EN 60320-1:1996+A1:1996 DIN EN60320-1/A2(VDE 0625 Teil 1/A2): 1998.10; EN 60320-1/A2:1998 CE-607 straight cable entry. 10A, 250V~ Number of poles: Two poles without earthing contact Type of construction: Standard sheet: C17 H05VV-F 2X 0.75mmsq(max. 2m) Material of live part carriers: Remarks: Crastin SK655FR Connectors without earthing contact shall be part of a cord set or interconnection cord set. 6) Marks Licence No.: 126853(File ref17058-1550-0011/31x0y) Sum of annual fee units 465 Issued date: 2000.07.12. DIN EN60320-1(VDE 0625 Teil 1): 1997.07; EN 60320-1:1996+A1:1996 DIN EN60320-1/A2(VDE 0625 Teil 1/A2): 1998.10; EN 60320-1/A2:1998 CE-608 straight cable entry 2.5A, 250V~ Number of poles: Two poles with earthing contact Type of construction: Standard sheet: C5 H03VV-F 3X 0.75mmsq H05VV-F 3X 0.75mmsq Prepared by Tonyfeng Page:101 / Total Page:250 Issued Data: 03/06/24

Insulation of insert Remarks: Chang Cun Plastic Type 8875002471 Connectors 2.5A with earthing contact shall be part of a cord set. 7) Marks Licence No.: 40002106(File ref1705800-1550-0013/a4009y) Sum of annual fee units 465 Issued date: 2002.06.27. DIN EN60320-1(VDE 0625 Teil 1): 1997.07; EN 60320-1:1996+A1:1996 DIN EN60320-1/A2(VDE 0625 Teil 1/A2): 1998.10; EN 60320-1/A2:1998 CS-001A, straight cable entry 10A, 250V~ Number of poles: Two poles with earthing contact Kind of construction: Standard sheet: C15 Insulation material: H05RR-F 3G 1.0mmsq Insert Type B31.001; Taller. 3.6 Socket-outlet, non-rewirable, portable 1) Marks Licence No.: 40001504(File ref1705800-1540-0001/28025) Sum of annual fee units 467 Issued date: 2002.05.21 updated 2003.04.15 DIN VDE 0620-1(VDE 0620 Teil 1):2002.01 CE-604 16A, 250V~ Number of poles: Two poles with earthing contact Kind of construction: DIN 49440. H05VV-F 3G 1.0mmsq H05VV-F 3G 1.5mmsq H05RN-F 3G 1.0mmsq Prepared by Tonyfeng Page:102 / Total Page:250 Issued Data: 03/06/24

H05RR-F 3G 1.0mmsq H05RR-F 3G 1.5mmsq H07RN-F 3G 1.0mmsq H07RN-F 3G 1.5mmsq Degree of protection: IP20 Insulation material of current carrying parts Taller-Einsatz B40. Prepared by Tonyfeng Page:103 / Total Page:250 Issued Data: 03/06/24

Item 11 挪威 NEMKO 產品認証 1. 術語名詞 NEMKO NEMKO is an independent testing and certification body and competence center for technical safety and reliability, a non-profit foundation. The original NEMKO (Norges Elektriske Materiellkontroll) was established in 1933 as an institution for mandatory safety testing and national approval of electrical equipment to marketed and sold in Norway for connection the public utility network. Later, also testing of radio interference requirements became part of the approval regime. In 1990, as Norway entered into the European Economical Area agreement, the European Community Directives for product safety were adopted, whereby the traditional mandatory approval scheme was abandoned. In this connection, NEMKO was transformed into an independent, self-owned foundation, having a council of representatives from different interest groups (industry and trade organizations, consumer associations, utility companies etc.) as the highest level of supervision. At the same time, the foundation established and became the sole owner of Nemko AS, which constitutes the central operating company and is responsible for what is today denoted the Nemko Group. Since 1992, both the scope of services and the global presence of Nemko have been drastically expanded. The Nemko Group today offers testing, inspection and certification services concerning products, machinery, installations and systems worldwide. 2. 申請者資料 Applicant: R & L Company or Chau s Electrical Co., Ltd.(Hong Kong) ( 未注明的全部的申請為 R&L Company) Manufacturer: Chau s Electrical Co., Ltd.(Hong Kong) Factory: 3. 認証產品清單. 1) Cord or Cable Chau s Electrical Co., Ltd.(Dong Guan) 共有 9 份証書, 包含 12 個產品型號. H03VH-F 2X0.1mmsq Black H03VVH2-F 2X0.5~0.75mmsq All colors H03VV-F H05VV-F 2X0.5~0.75mmsq, 3G 0.5~0.75mmsq All colors 2X0.75~2.5mmsq, 3~5G 0.75~2.5mmsq. All colors. H05VVH2-F 2X0.75~1.0mmsq Black H05V2V2-F 2X0.75mmsq Prepared by Tonyfeng Page:104 / Total Page:250 Issued Data: 03/06/24

H05RN-F H05RR-F A05RR-F H07RN-F A07RN-F H03RT-F 2) Non-rewirable PLUG 2X0.75~1.0mmsq, 3G 0.75~1.0mmsq. Black. 2X0.75~2.5mmsq, 3~4G 0.75~6.0mmsq, 5G 0.75~2.5mmsq 5X 1.5~2.5mmsq 2X1.0~2.5mmsq, 3~5G 1.0~2.5mmsq Black. 2X1.0~2.5mmsq, 3~5G 1.0~2.5mmsq Black. 2X0.75~1.5mmsq, 3G 0.75~1.5mmsq 共有 6 份証書, 包含 7 個產品型號. CE-501 CE-502 CE-502N CE-503 CE-504 CE-510 CE-512 3) Plug connecor 共有 3 份証書, 包含 3 個產品型號. CE-405 CE-601 CE-602 4) Cord set 共有 1 份証書, 包含 1 個產品型號. CE-503/CE-605 4. 認証產品祥細資料 4.1 Cord or Cable 1) Certificate No.:P95102596 有效期至 2005.08.01 Issued date: 1995.08.01. updated 1997.09.04 Group: NEK-HD21.1 S2, NEK-HD22.2 S2 and NEK-HD21.5 S3. H03VVH2-F 2X0.5~0.75mmsq All colors (Light polyvinyl chloride sheathe cord (flat), 300/300V) H03VV-F 2X0.5~0.75mmsq, 3G 0.5~0.75mmsq All colors (Light polyvinyl chloride sheathe cord (round), 300/300V) 2) Certificate No.:P98102183 有效期至 2000.07.01 Issued date: 1998.09.28 NEK-HD22.4 S2:92+A6:9(see also NEK-HD22.1 S2:92) Prepared by Tonyfeng Page:105 / Total Page:250 Issued Data: 03/06/24

Group: H05RN-F 2X0.75~1.0mmsq, 3G 0.75~1.0mmsq. Black. (Ordinary polychloroprene or equivalent synthetic elastomer sheathe cord and flexible cable, 300/300V) 3) Certificate No.:P00102315 長期有效 Issued date: 2000.12.13 Group: NEK-HD22.4 S3: 1995+A1: 1999 (see also NEK-HD22.1 S3:1997 and NEK-HD22.2 S3:1997). H05RR-F 2X0.75~2.5mmsq H05RR-F 3~4G 0.75~6.0mmsq H05RR-F 5G 0.75~2.5mmsq(A05RR-F 5X 1.5~2.5mmsq) (Tough ordinary EPR insulated and EPR sheathed cord and flexible cable, 300/500V) 4) Certificate No.:L93510 有效期至 2004.04.01 Issued date: 1994.03.04 updated 1997.09.04 Group: NEK-HD21.S2 Accoring to DEMKO test result 114717BN dated 1994.02.24 H05VV-F 2X0.75~2.5mmsq, 3~5G 0.75~2.5mmsq. All colors. (Ordinary polyvinylchloride sheathed cord, round, 300/500V) 5) Certificate No.:P01100934 長期有效 Issued date: 2001.05.22 Group: NEK-HD22.4 S3: 1995+A1: 1999 (see also NEK-HD22.1 S3:1997 and NEK-HD22.2 S3:1997). H07RN-F 2X1.0~2.5mmsq, 3~5G 1.0~2.5mmsq Black. A07RN-F 2X1.0~2.5mmsq, 3~5G 1.0~2.5mmsq Black. (Heavy polychloroprene or equivalent synthetic elastomer sheathed cord and flexible cable, 450/750V) 6) Certificate No.:P96103142 有效期至 2004.04.01 Issued date: 1996.11.25. updated 1997.09.04 Group: NEK-HD21.5 S3:94. H05VVH2-F 2X0.75~1.0mmsq Black (Ordinary polyvinyl chloride sheathe cord (flat), 300/500V) 7) Certificate No.:P98102896 有效期至 2000.06.06 Prepared by Tonyfeng Page:106 / Total Page:250 Issued Data: 03/06/24

Issued date: 1999.01.08 Group: NEK-HD22.4 S2:94+A6:92. H03RT-F 2X0.75~1.5mmsq, 3G 0.75~1.5mmsq (Braided flexible cord with insulation of rubber, 300/500V) 8) Certificate No.:P98100825 有效期至 2008.04.01 Issued date: 1998.04.27 S3:97) Group: NEK-HD21.5 S3:94(see also NEK-HD 21.1 S3:97 and NEK-HD21.2 H03VH-Y 2X0.1mmsq Black (Flat tinsel cord, 300/300V, Only for use in special appliance. Not for sale to non-subscribers) 9) Certificate No.:200114108 長期有效 Applicant: Issued date: 2001.04.02 S3:97) Group: Chau s Electrical Co., Ltd.(Hong Kong) NEK-HD21.12 S1:94(see also NEK-HD 21.1 S3:97 and NEK-HD21.2 H05V2V2-F 2X0.75mmsq (Heat resistant ordinary PVC sheathed cord for a max conductor temp of 90 degree, round, 300/500V) 4.2 Non-rewirable PLUG 1) Certificate No.:P02100506 長期有效. Applicant: Issued date: 2002.03.14. Group: Chau s Electrical Co., Ltd.(Hong Kong) NEK-IEC60884-1:1994+A1:1994+A2:1995 and relevant parts of CEE7 Non-rewirable two-pole plugs with dual earthing-contacts. Standard Sheet VII CE-512 angled cable entry 16A, 250V~ H03VV-F 3G 0.5mmsq Prepared by Tonyfeng Page:107 / Total Page:250 Issued Data: 03/06/24

H05RN-F 3G 0.75mmsq H05RN-F 3G 1.0mmsq H07RN-F 3G 1.0mmsq H07RN-F 3G 1.5mmsq 2) Certificate No.:P02101769 長期有效 Applicant: Issued date: 2002.09.06. Group: Chau s Electrical Co., Ltd.(Hong Kong) NEK-IEC60884-1:1994+A1:1994+A2:1995 and relevant parts of CEE7 Non-rewirable two-pole plugs with dual earthing-contacts. Standard Sheet VII CE-501, CE-502, CE-502N 16A, 250V~ H03RT-F 3G 0.75mmsq H03RT-F 3G 1.0mmsq 3) Certificate No.:P99100253 有效期至 2008.08.01 Issued date: 1999.02.10. Group: NEK-IEC60884-1:1994+A1:1994+A2:1995 Non-rewirable two-pole plugs with dual earthing-contacts. Standard Sheet VII a) CE-501 b) CE-502 10-/16A~, 250V H03VV-F 3G 0.75mmsq. All colors. H05VV-F 3G 0.75~1.5mmsq. All colors. H05RR-F 3G 0.75~1.5mmsq. All colors. H03VV-F 3G 0.75mmsq. All colors. H05VV-F 3G 0.75~1.5mmsq. All colors. Prepared by Tonyfeng Page:108 / Total Page:250 Issued Data: 03/06/24

c) CE-502N H05RR-F 3G 0.75~1.5mmsq. All colors. H03VV-F 3G 0.75mmsq. All colors. H05VV-F 3G 0.75~1.5mmsq. All colors. 4) Certificate No.:P98101103 有效期至 2004.03.01 Issued date: 1998.05.26. updated 1998.06.17 Group: NEK-EN50075: 90 Two pole plug for Class II appliances CE-503 Insert: 2.5A, 250V~ H03VV-F 2X 0.75mmsq All colors H03VVH2-F 2X 0.5~0.75mmsq All colors H05VVH2-F 2X 0.75mmsq All colors YS-02 5) Certificate No.:P98102530 有效期至 2008.10.01 Issued date: 1998.11.06. updated 1998.12.16 Group: NEK-IEC884-1: 94+A1:94+A2:95. Non-rewirable two pole plug for Class II appliances. Standard Sheet XVII CE-504 10-/16A~, 250V H03VV-F 2X 0.75mmsq All colors H05VV-F 2X 0.75~1.0mmsq All colors H05VVH2-F 2X 0.75~1.0mmsq All colors 6) Certificate No.:P01100809 長期有效. Applicant: Issued date: 2001.05.03. Chau s Electrical Co., Ltd.(Hong Kong) Prepared by Tonyfeng Page:109 / Total Page:250 Issued Data: 03/06/24

Group: NEK-IEC60884-1: 94+A1:94+A2:95. Non-rewirable two pole plug for Class II appliances. Standard Sheet XVII, CE-510 maximum outline 16A, 250V~ 4.3 Plug connector H05VV-F 2X 0.75~1.0mmsq H05RN-F 2X 0.75~1.0mmsq 1) Certificate No.:P95104073 Issued date: 1995.12.04. 有效期至 2005.06.04 Group: NEK-EN60320 Plug connectors for Class Ⅰ equipment, Standard sheet E CE-405 10A, 250V~ H05VV-F 3G 0.75mmsq. All colors This certificate is based on notification of Nordic test results 119363 ASC from DEMKO, according to Nordic agreement. 2) Certificate No.:L93589 Issued date: 1997.09.04. 有效期至 2004.04.01 Group: C13. NEK-EN60320 Two pole connector with earth, for Class Ⅰ equipment, standard sheet CE-601 10A, 250V~ Prepared by Tonyfeng Page:110 / Total Page:250 Issued Data: 03/06/24

H05VV-F 3G 0.75~1.0mmsq. All colors This certificate is based on notification of Nordic test results 114557 ASC from DEMKO, according to Nordic agreement. 3) Certificate No.:P94100988 Issued date: 1997.09.04. 有效期至 2004.09.01 Group: NEK-EN60320 Connector for Class II equipment for cold conditions, standard sheet C7. CE-602 2.5A, 250V~ H03VVH2-F 2X 0.5~0.75mmsq. All colors H05VVH2-F 2X 0.75mmsq. All colors This certificate is based on notification of Nordic test results 115696 from DEMKO, according to Nordic agreement. 4.4 Cord set 1) Certificate No.:P98102501 Issued date: 1998.11.09. 有效期至 2008.08.17 NEK-EN60797:87+A1:94 Group: Cord set for Class II equipment. StandardXVI, alternative II/I.. CE-503/CE-605 0.2A, 250V~ H03VH-Y 2X 0.1mmsq. All colors Prepared by Tonyfeng Page:111 / Total Page:250 Issued Data: 03/06/24

Item 12 丹麥 DEMKO 產品認証 1. 術語名詞 UL International Demko A/S It s a body notified to the Member States and Commission of the European Communities according to the provision of Article 8 of the Low Voltage Directive. 2. 申請者資料 It s a subsidiary of UL International Laboratories Inc. Applicant: R & L Company or Chau s Electrical Co., Ltd.(Hong Kong) ( 未注明的全部的申請為 R&L Company) Manufacturer: Chau s Electrical Co., Ltd.(Hong Kong) Factory: 3. 認証產品清單. 1)Cord or Cable Chau s Electrical Co., Ltd.(Dong Guan) 共有 9 份証書, 包含 13 個產品型號. H03RT-F H03VH-Y H03VV-F H03VVH2-F H05VV-F H05VVH2-F H05V2V2-F H05RN-F A05RN-F H05RR-F A05RR-F H07RN-F A07RN-F 2) Non-rewirable PLUG 共有 6 份証書, 包含 6 個產品型號. CE-501 CE-502 CE-502N CE-503 CE-504 CE-510 3) Plug connecor 共有 3 份証書, 包含 3 個產品型號. Prepared by Tonyfeng Page:112 / Total Page:250 Issued Data: 03/06/24

CE-045 CE-601 CE-602 4) Cord set 共有 1 份証書, 包含 1 個產品型號. CE-503/CE-605 4. 認証產品祥細資料 4.1 Cord or Cable 1) Certificate No.:98-03599 有效期至 2000.06.01 Issued date: 1998.12.01 Product: Type: HD22.1 S3:1997, + HD22.2 S3:1997and HD22.4 S3:1995 Complies with the national deviations in Denmark. Braided Cord H03RT-F 300/300V, 2X0.75~1.5mmsq, 3G 0.75~1.5mmsq CHAU S printed on the blue core. This certificate has been issued on the basis of CB Certificate No. DK98-03599 dated 1998.12.01 issued by DEMKO A/S. 2) Certificate No.:123420FP 有效期至 2008.03.23 Issued date: 1998.03.23 Product: Type: HD21.1 S3, HD 21.2 S3 and HD21.5 S3. Flat tinsel cord with insulation of PVC rated voltage 300/300V H03VH-Y 3) Certificate No.:114712ASC 有效期至 2004.02.24 Issued date: 1995.06.22 Product: HD21.1 S2, HD 21.2 S2 and HD21.5 S2. Light sheathed flexible cord with insulation and sheath of PVC rated 300/300V Type: H03VV-F 2X0.5~0.75mmsq, 3G0.5~0.75mmsq H03VVH2-F 2X0.5~0.75mmsq Prepared by Tonyfeng Page:113 / Total Page:250 Issued Data: 03/06/24

4) Certificate No.:99-03513 有效期至 2000.06.01 Issued date: 1999.10.26 4:1994 Product: HD22.1 S3:1997, HD 22.2 S3 :1997and HD22.4 S3.:1995 and IEC245- Ordinary polychloroprene or other equivalent synthetic elatomer sheathed cord and flexible cable rated 300/500V Type: H05RN-F 2X0.75~1.0mmsq H05RN-F 3G0.75~1.0mmsq A05RN-F 2X1.5~2.5mmsq, 3~5G1.5~2.5mmsq, 4~5G0.75~1.0mmsq 5) Certificate No.:128293 有效期至 2011.01.09 Issued date: 2001.01.09 Product: Type: HD22.1 S3:1997+HD 22.2 S3 :1997+HD22.4 S3.:1995+A1:1999 Ordinary tough rubber sheathed cord rated 300/500V H05RR-F 2X0.75~2.5mmsq, 3~4G0.75~6.0mmsq, 5G0.75~2.5mmsq A05RR-F 3~5X0.75~2.5mmsq 6) Certificate No.:114717BN 有效期至 2004.02.24 Issued date: 1994.02.24 Product: Type: HD21.1 S2, HD 21.2 S2 and HD21.5 S2. Ordinary sheathed flexible cord with insulation and sheath of PVC rated 300/500V H05VV-F 2~5X0.75~2.5mmsq 7) Certificate No.:129575-01 有效期至 2011.03.13 Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.03.26 Product: Type: HD21.1 S3:1997+HD 21.12 S1:1994+HD21.2 S3:1997. Flexible cord rated 300/500V Prepared by Tonyfeng Page:114 / Total Page:250 Issued Data: 03/06/24

H05V2V2-F 2X0.75mmsq 8) Certificate No.:121536ES 有效期至 2004.03.25 Issued date: 1996.11.15 Product: Type: HD21.1 S2, HD 21.2 S2 and HD21.5 S2. Ordinary sheathed flexible cord with insulation and sheath of PVC rated 300/500V H05VVH2-F 2X0.75~1.0mmsq 9) Certificate No.:129178-01 有效期至 2010.12.02 Issued date: 2001.05.10 Product: Type: HD22.1 S3:1997+HD 22.2 S3 :1997+HD22.4 S3.:1995+A1:1999 Flexible cable rated 450/750V H07RN-F 2X1.0~2.5mmsq, 3~5G1.0~2.5mmsq A07RN-F 3~5G1.0~2.5mmsq 4.2 Non-rewirable PLUG 1) Certificate No.:132956-01 有效期至 2012.08.28 Applicant: Issued date: 2002.08.28. Product: Chau s Electrical Co., Ltd.(Hong Kong) IEC60884-1:1994+A1:1994+A2:1995+SB 107-2-D1 Ed.3: 1998 Complies with the national deviations in Denmark. Non-rewirable two-pole plugs with dual earthing-contacts. Standard sheet VⅡ(CEE 7: 1963) CE-501, CE-502, CE-502N 10-16A, 250V~ Insulation Class: Ⅰ Degree of protection: Ordinary H03RT-F 3G 0.75~1.0mmsq 245 IEC 51 3G 0.75~1.0mmsq Prepared by Tonyfeng Page:115 / Total Page:250 Issued Data: 03/06/24

2) Certificate No.:98-02808/124922 有效期至 2008.07.16 Issued date: 1999.01.04. Product: Standard sheet VII of CEE7: 1963 with Mod.1-4 Complies with the national deviations in Denmark. Two pole plug of thermoplastic material in any color, nonrewirable CE-501, CE-502, CE-502N 10-/16A~, 250V Insulation Class: Ⅰ Degree of protection: Insert: Ordinary manufactured by GEM. CE-501 Straight design H03VV-F H05VV-F H03RT-F H05RR-F CE-502 Angled design H03VV-F H05VV-F H03RT-F H05RR-F CE-502N Angled design H03VV-F H05VV-F H03RT-F 3G0.75mmsq 3G0.75~1.5mmsq 3G0.75~1.0mmsq 3G0.75~1.5mmsq 3G0.75mmsq 3G0.75~1.5mmsq 3G0.75~1.0mmsq 3G0.75~1.5mmsq 3G0.75mmsq 3G0.75~1.5mmsq 3G0.75~1.0mmsq 3) Certificate No.:114199DP 有效期至 2004.02.22 Issued date: 1998.04.24. Product: CEE7: 1963 with Mod.1-4 and the EN50075 Standard sheet XVI(alternative II) Two pole plug of thermoplastic material in any color, non-rewirable Prepared by Tonyfeng Page:116 / Total Page:250 Issued Data: 03/06/24

CE-503 2.5A~, 250V Degree of protection: Insert: Ordinary with alternative insert YS-02. H03VV-F 2X0.75mmsq H03VVH2-F 2X0.5~0.75mmsq H05VVH2-F 2X0.75mmsq 4) Certificate No.:98-03289/124929 有效期至 2008.09.01 Issued date: 1998.10.05. Product: CEE7: 1963 with Mod.1-4 and the EN50075 Standard sheet XVII(Maximum outline) Two pole plug of thermoplastic material in any color, non-rewirable CE-504 10-/16A~, 250V Degree of protection: Insulation Class : H05VV-F Ordinary Class II 2X1.0mmsq 5) Certificate No.:114189ES 有效期至 2003.10.14 Issued date: 1997.01.31. Product: CEE7: 1963 with Mod.1-4 and the EN50075 Standard sheet XVII(Maximum outline) Two pole plug of thermoplastic material in any color, non-rewirable, for class II appliance CE-504 10-/16A~, 250V Degree of protection: Ordinary Prepared by Tonyfeng Page:117 / Total Page:250 Issued Data: 03/06/24

H03VVH2-F 2X0.75mmsq H05VV-F 2X0.75mmsq H05VVH2-F 2X0.75~1.0mmsq 6) Certificate No.:129699-01 有效期至 2011.02.28 Applicant: Issued date: 2001.04.25. Product: Chau s Electrical Co., Ltd.(Hong Kong) CEE7: 1963 with Mod.1-4 Standard sheet XVII HD21, HD22 Two pole plug, non-rewirable, for class II appliance CE-510 16A, 250V~ Degree of protection: 4.3 Plug connector H05VV-F H05RN-F 1) Certificate No.:119363ASC Ordinary 2X0.75~1.0mmsq 2X0.75~1.0mmsq Issued date: 1995.10.24. 有效期至 2005.05.04 Group: IEC320 1 and IEC320-2-2 Plug connectors non-rewirable of thermoplastic material in any color for Class Ⅰ equipment, Standard sheet E CE-045 10A, 250V~ H05VV-F 3G 0.75mmsq. 2) Certificate No.:114557ASC Issued date: 1994.02.22. 有效期至 2004.02.22 EN60320, standard sheet C13 Prepared by Tonyfeng Page:118 / Total Page:250 Issued Data: 03/06/24

Group: Plug connectors non-rewirable of thermoplastic material in any color for Class Ⅰ equipment. CE-601 10A, 250V~ H05VV-F 3G 0.75~1.0mmsq. 3) Certificate No.:115696ASC Issued date: 1994.08.15. 有效期至 2004.08.15 Group: EN60320, standard sheet C7 Plug connectors non-rewirable of thermoplastic material in any color for Class II equipment. CE-602 4.4 Cord set 2.5A, 250V~ H03VVH2-F 2X 0.5~0.75mmsq. H05VVH2-F 2X 0.75mmsq. 1) Certificate No.:98-03206/124830 Issued date: 1998.02.10. 有效期至 2008.08.17 Product: IEC799:1984+A1:1993+A2:1995 Standard sheet XVI, alternative II/I, connector standard sheet C1 Cord set, non-rewirable, of thermoplastic material in any color for Class II equipment. CE-503/CE-605 Plug:2.5A, connector 0.2A, 250V~ Degree of protection: Ordinary Prepared by Tonyfeng Page:119 / Total Page:250 Issued Data: 03/06/24

H03VH-Y 2X 0.1mmsq. Prepared by Tonyfeng Page:120 / Total Page:250 Issued Data: 03/06/24

Item 13 芬蘭 FIMKO 產品認証 1. 術語名詞 SGS Fimko Ltd. 2. 申請者資料 Certificate Holder: Manufacturer: Manufacturing site: 3. 認証產品清單. 1) Cord or Cable SGS Fimko has been testing products since 1928 and has become a testing and certifying company of international renown. SGS Fimko which has in the space of a few years achieved outstanding export success, helps its customers enter global markets in Europe, Russia, North America, South America, Australia, New Zealand, South Africa and Japan. SGS Fimko certifies quality and environmental systems and is renowned as an expert in the electrical, machinery and service sectors. R & L Company or Chau s Electrical Co., Ltd.(Hong Kong) ( 未注明的証書持有為 R&L Company) 共有 10 份証書, 包含 12 個產品型號. H03RT-F H03VH-Y H03VV-F. H03VVH2-F H05VV-F H05VVH2-F H05V2V2-F H05RN-F H05RR-F A05RR-F H07RN-F A07RN-F 2) Non-rewirable PLUG 共有 11 份証書, 包含 8 個產品型號. CE-501 CE-501S CE-502 CE-502N CE-502S CE-503 CE-504 Chau s Electrical Co., Ltd.(Hong Kong) Chau s Electrical Co., Ltd.(Dong Guan) Prepared by Tonyfeng Page:121 / Total Page:250 Issued Data: 03/06/24

CE-510 3) Plug connecor 4) Cord set 共有 3 份証書, 包含 3 個產品型號. CE-045 CE-601 CE-602 共有 1 份証書, 包含 1 個產品型號. CE-503/CE-605 4. 認証產品祥細資料 4.1 Cord or Cable 1) Certificate No.:17792 有效期至 2011.12.31 Certificate Holder: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.01.09 Product: Type: HD22.4 S3:1995 + A1:1999+IEC60245-4:1994+A1:1997 Flexible cord for electric irons. H03RT-F 300/300V, 60245 IEC 51, 3G 1.0mmsq 2) Certificate No.:10601 有效期至 2008.12.31 Issued date: 1998.04.03 Product: Type: HD21.5 S3. PVC insulated flat twin tinsel cord rated voltage 300/300V H03VH-Y 3) Certificate No.:183940-01 有效期至 2004.12.31 Issued date: 1995.07.14 Product: Type: HD21.1 S2, HD 21.2 S2 and HD21.5 S3. Light PVC sheathed flexible cord rated 300/300V H03VV-F 3G0.5~0.75mmsq 4) Certificate No.:172829-01 02 有效期至 2004.12.31 Issued date: 1994.03.02 Prepared by Tonyfeng Page:122 / Total Page:250 Issued Data: 03/06/24

Product: Type: HD21.1 S2, HD 21.2 S2 and HD21.5 S3. Light PVC sheathed flexible cord rated 300/300V H03VV-F 2X0.5~0.75mmsq H03VVH2-F 2X0.5~0.75mmsq 5) Certificate No.:11668 有效期至 2000.06.01 Issued date: 1998.09.18 Product: Type: HD22.4 S3.:1995 +A1:1998. Ordinary polychloroprene sheathed flexible cord rated 300/500V H05RN-F 2X0.75~1.0mmsq, 3G0.75~1.0mmsq 6) Certificate No.:16139 有效期至 2010.12.31 Issued date: 2000.12.13 Product: Type: HD22.1 S3:1997+HD 22.2 S3 :1997+HD22.4 S3.:1995+A1:1999 Ordinary tough rubber sheathed flexible cord rated 300/500V H05RR-F 2X0.75~2.5mmsq, 3~4G0.75~6.0mmsq, 5G0.75~2.5mmsq A05RR-F 5X1.5~2.5mmsq 7) Certificate No.:172828-01 有效期至 2004.12.31 Issued date: 1994.03.02 Product: Type: HD21.1 S2, HD 21.2 S2 and HD21.5 S2. Ordinary sheathed flexible cord with insulation and sheath of PVC rated 300/500V H05VV-F 2~5X0.75~2.5mmsq 8) Certificate No.:187907-01 有效期至 2004.03.25 Issued date: 1995.12.13 Product: HD21.1 S2, HD 21.2 and HD21.5 S3. Prepared by Tonyfeng Page:123 / Total Page:250 Issued Data: 03/06/24

Type: Ordinary sheathed flexible cord with insulation and sheath of PVC rated 300/500V H05VVH2-F 2X0.75~1.0mmsq Color Identifiers: WH. 9) Certificate No.:16614 有效期至 2011.12.31 Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.04.06 Product: Type: HD21.1 S3:1997+HD 21.12 S1:1994+HD21.2 S3:1997. Heater resistant ordinary PVC sheathed flexible cord rated 300/500V H05V2V2-F 2X0.75mmsq 10) Certificate No.:16218 有效期至 2011.12.31 Issued date: 2001.01.08 Product: Type: HD22.1 S3:1997+HD 22.2 S3 :1997+HD22.4 S3.:1995+A1:1999 Oil resistant flexible rubber cable rated 450/750V H07RN-F 2X1.0~2.5mmsq, 3~5G1.0~2.5mmsq A07RN-F 3~5X1.0~2.5mmsq 4.2 Non-rewirable PLUG 1) Certificate No.:18904 有效期至 2012.12.31 Certificate Holder: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.09.26. Product: IEC60884-1:1994+A1:1994+A2:1995+SFS5610:1996+A1: 1998 Non-rewirable two-pole plugs with dual earthing-contacts. Standard sheet VⅡ(CEE 7: 1963) CE-501, CE-502, CE-502N 16A, 250V~ Degree of protection: IP20 Prepared by Tonyfeng Page:124 / Total Page:250 Issued Data: 03/06/24

H03RT-F 3G 0.75~1.0mmsq, 245 IEC 51. 2) Certificate No.:11012 有效期至 2004.12.31 Issued date: 1998.06.05. Product: Standard sheet VII of CEE7: 1963 with Mod.1-4 and SFS 5610 Two pole plug, non-rewirable CE-501, CE-502 10-/16A~, 250V Degree of protection: H05RR-F IP20 3G0.75~1.5mmsq 3) Certificate No.:13206 有效期至 2008.12.31 Issued date: 1999.06.01. Product: Standard sheet VII of CEE7: 1963 with Mod.1-4 and SFS 5610 Two pole plug, non-rewirable CE-501 10-/16A~, 250V Degree of protection: H05VV-F IP20 3G1.5mmsq 4) Certificate No.:196456-01 有效期至 2007.12.31 Issued date: 1997.07.14. Product: Standard sheet VII of CEE7: 1963 with Mod.1-4 and SFS 5610 Two pole plug, non-rewirable CE-502 10-/16A~, 250V Degree of protection: Ordianry. Prepared by Tonyfeng Page:125 / Total Page:250 Issued Data: 03/06/24

Installation method: H05VV-F Portable 3G1.5mmsq 5) Certificate No.:172795 有效期至 2004.12.31 Issued date: 1994.03.02. Product: Standard sheet VII of CEE7: 1963 with Mod.1-4 and SFS 5610 Two pole plug, non-rewirable CE-501, CE-502 10-/16A~, 250V Degree of protection: Installation method: H03VV-F H05VV-F Ordinary. Portable 3G0.75mmsq 3G0.75~1.0mmsq 6) Certificate No.:11872 有效期至 2008.12.31 Issued date: 1998.10.22. Product: Standard sheet VII of CEE7: 1963 with Mod.1-4 and SFS 5610 Two pole plug, non-rewirable CE-502N 10-/16A~, 250V Degree of protection: H03VV-F H05VV-F IP20. 3G0.75mmsq 3G0.75~1.5mmsq 7) Certificate No.:16624 有效期至 2008.12.31 Issued date: 2001.04.10. Product: IEC60884-1:1994+A1:1994+A2:1995+SFS 5610:1996+A1:1998 Two pole plug, non-rewirable Prepared by Tonyfeng Page:126 / Total Page:250 Issued Data: 03/06/24

CE-501S, CE-502S 16A, 250V~ Degree of protection: H05VV-F IP20 3G0.75~1.5mmsq 8) Certificate No.:17495 有效期至 2011.12.31 Certificate Holder: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.11.01. Product: EN50075 :1990 Standard sheet I. Two pole plug, non-rewirable CE-503 2.5A, 250V~ Degree of protection: H03VH-Y H03VV-F IP20 2X0.75mmsq H03VVH2-F 2X0.5~0.75mmsq H05VVH2-F 2X0.75mmsq 9) Certificate No.:17461 有效期至 2011.12.31 Certificate Holder: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.10.25. Product: CEE7 Standard sheet XVII IEC60884-1:1994+A1:1994+A2:1995 SFS5610:1996+A1:1998 Two pole plug, non-rewirable CE-504 16A, 250V~ Degree of protection: IP20 Prepared by Tonyfeng Page:127 / Total Page:250 Issued Data: 03/06/24

H03VVH2-F 2X0.75mmsq H05VVH2-F 2X0.75mmsq H05VV-F 2X0.75~1.0mmsq 10) Certificate No.:193445-01 有效期至 2003.12.31 Issued date: 1996.11.27. Product: CEE7 Standard sheet XVII Two pole plug, non-rewirable CE-504 10-/16A~, 250V Degree of protection: IP20 H05VVH2-F 2X1.0mmsq 11) Certificate No.:16710 有效期至 2011.12.31 Applicant: Issued date: 2001.05.04. Product: Chau s Electrical Co., Ltd.(Hong Kong) CEE7: 1963 with Mod.1-4 Standard sheet XVII IEC60884-1:1994+A1:1994+A2:1995 SFS 5610:1996+A1:1998 Two pole plug, non-rewirable, for class II appliance CE-510 16A, 250V~ Degree of protection: 4.3 Plug connector H05VV-F H05RN-F 1) Certificate No.:186830-01 IP20 2X0.75~1.0mmsq 2X0.75~1.0mmsq Issued date: 1995.11.07. 有效期至 2005.12.31 Prepared by Tonyfeng Page:128 / Total Page:250 Issued Data: 03/06/24

Group: NE 60320-2-2 Plug connectors non-rewirable Class Ⅰ equipment, Standard sheet E CE-045 10A, 250V~ Installation method: Degree of protection: Portable Ordinary H05VV-F 3G 0.75mmsq. 2) Certificate No.:172798-01 Issued date: 1994.03.02. 有效期至 2004.12.31 Products: EN60320, standard sheet C13 Plug connectors non-rewirable for Class Ⅰ equipment. CE-601 10A, 250V~ H05VV-F 3G 0.75~1.0mmsq. 3) Certificate No.:175954-01 02 Issued date: 1994.07.27. 有效期至 2004.12.31 Product: EN60320-1 Plug connectors non-rewirable for Class II equipment. CE-602 2.5A, 250V~ Installation method: Degree of protection: Portable Ordinary H03VVH2-F 2X 0.5~0.75mmsq. Prepared by Tonyfeng Page:129 / Total Page:250 Issued Data: 03/06/24

4.4 Cord set 1) Certificate No.:11823 H05VVH2-F 2X 0.75mmsq. Issued date: 1998.10.16. 有效期至 2008.12.31 Product: IEC60799:1984+A1:1993+A2:1995 Standard sheet CCE7/XVI, connector standard sheet EN60320/C1 Cord set, non-rewirable, for Class II CE-503/CE-605 Plug:2.5A, connector 0.2A, 250V~ Degree of protection: IP20 H03VH-Y 2X 0.1mmsq. equipment. Prepared by Tonyfeng Page:130 / Total Page:250 Issued Data: 03/06/24

Item 14 澳利 OVE 產品認証 1. 術語名詞 OVE: The non-profit Austrian Electro-technical Association (OVE) - founded in 1883 on the occasion of the so-called Electro-technical Exhibition in Vienna - considers itself as competent partner regarding all fields of electrical industry, commerce as well as administrative bodies, schools, colleges and universities. 2. 申請者資料 Manufacturer: Chau s Electrical Co., Ltd.(Hong Kong) Factory: 3. 認証產品清單. 1) Cord or Cable Chau s Electrical Co., Ltd.(Dong Guan) 共有 8 份証書, 包含 10 個產品型號. H03RT-F H03VH-Y H03VV-F H03VVH2-F H05VV-F H05VVH2-F H05V2V2-F H05RR-F H05RN-F H07RN-F 2) Non-rewirable PLUG 共有 8 份証書, 包含 7 個產品型號. CE-501 CE-502 CE-502N CE-503 CE-504 CE-510 CE-511 3) Plug connecor 共有 3 份証書, 包含 3 個產品型號. CE-045 CE-601 CE-602 4) Cord set Prepared by Tonyfeng Page:131 / Total Page:250 Issued Data: 03/06/24

共有 3 份証書, 包含 3 個產品型號. CE-503/CE-605 CE-503/CE-602 CE-511/CE-604 5) Socket-outlet 共有 1 份証書, 包含 1 個產品型號. CE-604 4. 認証產品祥細資料 4.1 Cord or Cable 1) Certificate No.:628-328-02 有效期至 2004.05.26 Issued date: 2002.05.14 Type: H03VH-Y 2) Certificate No.:628-148-04 有效期至 2005.06.01 Issued date: 2003.05.19 Type: H05VV-F 3G 0.75~2.5 H03VV-F 3G 0.5~0.75 3) Certificate No.:628-149-04 有效期至 2005.06.01 Issued date: 2003.06.01 Type: H03VV-F 2X0.5~0.75mmsq H03VVH2-F 2X0.5~0.75mmsq H05VV-F 2X0.75~1.5mmsq H05VVH2-F 2X75~1.0mmsq 4) Certificate No.:628-347-01 有效期至 2003.01.28 Issued date: 2001.01.16 Type: H03RT-F 2X0.75~1.3mmsq 5) Certificate No.:628-436-01 有效期至 2004.01.25 Issued date: 2002.10.17 Type: H03RT-F 3G 0.75~1.5mmsq 6) Certificate No.:628-339-02 有效期至 2004.11.03 Issued date: 2002.09.19 Type: H05RR-F 2X0.75~2.5mmsq, 3G 0.75~2.5mmsq Prepared by Tonyfeng Page:132 / Total Page:250 Issued Data: 03/06/24

H05RN-F 2X0.75~1.0mmsq, 3G 0.75~1.0mmsq 7) Certificate No.:628-400-01 有效期至 2004.12.11 Issued date: 2002.09.19 Type: H07RN-F 2X1.0~1.5mmsq, 3G 1.0~1.5mmsq 8) Certificate No.:628-410-01 有效期至 2005.03.16 Issued date: 2003.01.16 Type: H05V2V2-F 2X0.75mmsq 4.2 Non-rewirable PLUG 1) Certificate No.:628-326-02 Issued date: 2002.04.25. 有效期至 2004.05.26 CE-501 10-/16A~, 250V H05VV-F 3G 1.5mmsq 2) Certificate No.:628-093-04 有效期至 2004.02.08 Issued date: 2002.01.31. CE-501, CE-502 Insert: 10-/16A~, 250V GEM CE-501 Straight design H03VV-F H05VV-F H03RT-F H05RR-F CE-502 Angled design H03VV-F H05VV-F H03RT-F H05RR-F 3G0.75mmsq 3G0.75~1.5mmsq 3G0.75~1.0mmsq 3G0.75~1.5mmsq 3G0.75mmsq 3G0.75~1.5mmsq 3G0.75~1.0mmsq 3G0.75~1.5mmsq 3) Certificate No.:628-448-00 有效期至 2004.09.16 Issued date: 2002.01.31. Prepared by Tonyfeng Page:133 / Total Page:250 Issued Data: 03/06/24

CE-501, CE-502, CE-502N 10-/16A~, 250V H03RT-F 3G0.75~1.0mmsq 4) Certificate No.:628-322-02 有效期至 2004.03.18 Issued date: 2002.03.05 CE-502N Insert: 10-/16A~, 250V GEM H03VV-F H05VV-F H03RT-F 3G0.75mmsq 3G0.75~1.5mmsq 3G0.75~1.0mmsq 5) Certificate No.:628-428-00 有效期至 2003.09.18 Issued date: 2001.09.18. CE-503 2.5A~, 250V H03VH-Y H03VV-F 2X0.75mmsq H03VVH2-F 2X0.5~0.75mmsq H05VVH2-F 2X0.75mmsq 6) Certificate No.:628-087-05 有效期至 2004.02.08 Issued date: 2002.01.31. CE-504 16A~, 250V H03VVH2-F 2X0.75mmsq H05VVH2-F 2X0.75mmsq H05VV-F 2X0.75~1.0mmsq Prepared by Tonyfeng Page:134 / Total Page:250 Issued Data: 03/06/24

7) Certificate No.:628-411-02 有效期至 2005.03.16 Issued date: 2003.01.16 CE-510 16A, 250V~ H05VV-F H05RN-F H07RN-F 2X0.75~1.0mmsq 2X0.75~1.0mmsq 2X1.0mmsq 8) Certificate No.:628-414-03 有效期至 2005.04.04 Issued date: 2003.04.28. CE-511 16A, 250V~ 4.3 Plug connector H05RR-F H05RN-F H07RN-F 1) Certificate No.:628-192-03 3GX1.0~1.5mmsq 3X0.75~1.0mmsq 3X1.0~1.5mmsq Issued date: 2001.11.29. 有效期至 2003.11.02 CE-045 10A, 250V~ H05VV-F 3G 0.75mmsq. 2) Certificate No.:628-088-04 Issued date: 2002.05.14. 有效期至 2004.02.08 CE-601 10A, 250V~ 3)Certificate No.:628-095-05 H05VV-F 3G 0.75~1.0mmsq. Prepared by Tonyfeng Page:135 / Total Page:250 Issued Data: 03/06/24

Issued date: 2003.05.19 有效期至 2005.07.01 CE-602 4.4 Cord set 2.5A, 250V~ H03VVH2-F 2X 0.5~0.75mmsq. H05VVH2-F 2X 0.75mmsq. 1) Certificate No.:628-337-03 Issued date: 2003.05.19. 有效期至 2005.07.01 CE-503/CE-605 Plug:2.5A, connector 0.2A, 250V~ H03VH-Y 2X 0.1mmsq. 2) Certificate No.:628-385-02 Issued date: 2003.05.19. 有效期至 2005.07.01 CE-503/CE-602 2.5A,250V~ H03VVH2-F 2X 0.5~0.75mmsq. H05VVH2-F 2X 0.75mmsq. 3) Certificate No.:628-412-03 Issued date: 2003.04.28 有效期至 2005.04.04 CE-511/CE-604 16A,250V~ H05RR-F H05RN-F H07RN-F 3G 1.0~1.5mmsq. 3G 1.0mmsq. 3G 1.0~1.5mmsq. 4.5 Socket-outlet, non-rewirable, portable 1) Certificate No.:628-415-03 有效期至 2005.04.04 Prepared by Tonyfeng Page:136 / Total Page:250 Issued Data: 03/06/24

Issued date: 2003.04.28 CE-604 16A, 250V~ H05VV-F 3G 1.0~1.5mmsq H05RR-F 3G 1.0~1.5mmsq H05RN-F 3G 1.0mmsq H07RN-F 3G 1.0~1.5mmsq Prepared by Tonyfeng Page:137 / Total Page:250 Issued Data: 03/06/24

Item 15 法國 NF 認証產品 1. 術語名詞 LCIE: Central des Industries Electriques (LCIE) by government decree. 1996 LCIE becomes a limited company, the Certification department of the Union Technique de l'electricit? (UTE) is transferred to LCIE. 2001 LCIE becomes a Bureau Veritas Company. 2. 申請者資料 Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Manufacturer location: Chau s Electrical Co., Ltd.(Dong Guan) 制造商代號 : 1224. 3 NF 認証產品概況. 已取得認證的產品分為 3 類, 分別為 : 1) Plug non-rewirable 證書有 6 份, 型號有 6 個. CE-501 CE-502 CE-503 CE-504 CE-510 CE-512 2)Connector, non-rewirable 證書有 1 份, 型號有 1 個 CE-602 3)Socket-outlet, non-rewirable, portable 4. 認証產品描述證書有 1 份, 型號有 1 個 CE-603 4.1 Plug non-rewirable 1) Licence No.: 27967-969 Issued date: 1995.03.14 Product: Plug 2-pole with dual earthing contacts, non-rewirable. CE-501 Prepared by Tonyfeng Page:138 / Total Page:250 Issued Data: 03/06/24

10-/16A~, 250V H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75~1.0mmsq 2) Licence No.: 27970-972 Issued date: 1995.03.14 Product: Plug 2-pole with dual earthing contacts, non-rewirable. CE-502 10-/16A~, 250V H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75~1.0mmsq 3) Licence No.: 27966-28515 Issued date: 1995.03.14 NF EN50075(1990) Product: Plug 2-pole, non-rewirable. CE-503 2.5A~, 250V H03VVH2-F 2X 0.75mmsq H05VVH2-F 2X 0.75mmsq 4) Licence No.: 27973-974 Issued date: 1995.03.14 NF C61-303 Product: Plug 2-pole, non-rewirable. CE-504 10-/16A~, 250V H03VVH2-F 2X 0.75mmsq Prepared by Tonyfeng Page:139 / Total Page:250 Issued Data: 03/06/24

H05VVH2-F 2X 0.75mmsq 5) Licence No.: 20132010 Issued date: 2000.03.24 NF C61-303 Product: Plug 2-pole, non-rewirable. CE-510 16A, 250V~ H05VVH2-F H05RN-F 6) Licence No.: 40770010 Issued date: 2002.10.22 CE-512 NF C61-303(1999) 16A, 250V~, 2P+T H03VV-F 3G 0.5mmsq H05RN-F H07RN-F 4.2 Appliance plug connector. 1) Licence No.: 27963-964 Issued date: 1995.03.14. Product: NF EN60320-1 2X 0.75~1.0mmsq 2X 0.75~1.0mmsq 3G 0.75~1.0mmsq 3G 1.0~1.5mmsq Appliance connectors 2-pole, non-rewirable. CE-602 2.5A, 250V~ H03VVH2-F 2X0.75mmsq Prepared by Tonyfeng Page:140 / Total Page:250 Issued Data: 03/06/24

H05VVH2-F 2X0.75mmsq 4.3 Socket-outlet, non-rewirable, portable 1)Licence No.: 98100150/151 Issued date: 1998.01.29. Product: NF C61-303 Appliance connectors 3-pole, non-rewirable, IP44 CE-603 10/16A, 250V~ H05VV-F 3GX1.0~1.5mmsq Prepared by Tonyfeng Page:141 / Total Page:250 Issued Data: 03/06/24

Item 16 荷蘭 KEMA 認証產品 1. 術語名詞 KEMA: 2. 申請者資料 Applicant: KEMA is an independent company whose activities focus on providing customers with solutions to their technical problems. The majority of our customers are in businesses related to the generation, transmission, and distribution of electricity. KEMA specializes in high-level technical consultancy, and in testing, inspections & certification. KEMA undertakes research in support of these activities. With company headquarters in Arnhem, the Netherlands, KEMA also has offices in seventeen other countries. The benefits of the services provided by KEMA not only impact electrical utilities and electrical equipment manufacturers, but also investors, operators, users, governments, suppliers and financiers. By putting the customer first, KEMA always strives to achieve optimum results, in both technical and economic terms. KEMA enjoys an international reputation for reliability, integrity and expertise in the fields of consultancy, testing, research and quality management. R & L Company or Chau s Electrical Co., Ltd.(Hong Kong) ( 未注明的証書持有為 R&L Company) Manufacturer(Licensee): Chau s Electrical Co., Ltd.(Hong Kong) Factory location: 3 KEMA 認証產品概況. 已取得認證的產品分為 6 類, 分別為 : 1) Flexible cable(cord). 證書有 10 份, 型號有 9 個 H03VH-Y H03RT-F H03VV-F H03VVH2-F H05VV-F H05RN-F H05RR-F H05V2V2-F H07RN-F 2) Cord extension set, non-rewirable. 證書有 1 份, 型號有 1 個. Chau s Electrical Co., Ltd.(Dong Guan) Prepared by Tonyfeng Page:142 / Total Page:250 Issued Data: 03/06/24

CE-511/CE-604 3)Cord set 證書有 2 份, 型號有 2 個 CE-503/CE-605 CE-502/CS-001A 4) Plug non-rewirable 證書有 11 份, 型號有 11 個. CE-501 CE-502 CE-502N CE-503 CE-503B CE-504 CE-510 CE-511 CE-512 CE-513 CE-513G 5) Connector, non-rewirable 證書有 7 份, 型號有 6 個 CE-045 CS-001A CE-601 CE-602 CE-605 CE-608 6) Socket-outlet, non-rewirable, portable 證書有 2 份, 型號有 2 個 CE-603 4. 認証產品描述 CE-604 4.1 Flexible cable and cords. 1) Certificate No.: 98.1302.01 Issued date: 1998.04.08. IEC 60227-5: 1979; HD21.1 S2, HD21.2S2 Rated voltage: 300/300V Types: Prepared by Tonyfeng Page:143 / Total Page:250 Issued Data: 03/06/24

H03VH-Y 2)Certificate No.:99.0648.01 Issued date: 1992.02.03 IEC245-4:1994; HD 22.4 S3: 1995 Rated voltage: 300/300V Tested cord: H03RT-F 2X1.5mmsq Types: H03RT-F 3)Certificate No.:2021582/01 2~3X0.75~1.5sqmm Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.06.07 IEC245-4:1994+A1:1997+HD 22.4 S3: 1995+A1:1999 Rated voltage: 300/300V Tested cord: H03RT-F 3G 1.0mmsq Types: H03RT-F 4) Certificate No.: 92.8934.04 Issued date: 1993.05.19 3G 1.0sqmm HD 21.5 S2: 1994+IEC60227-5+A1 Rated voltage: 300/500V Types: H05VV-F 2X0.75~5X2.5mmsq 5) Certificate No.: 92.8934.02 Issued date: 1993.05.19 HD 21.5 S2: 1994+IEC60227-5+A1 Rated voltage: 300/300V Types: H03VV-F 2X0.5~4X0.75mmsq H03VVH2-F 2X0.5~0.75mmsq 6)Certificate No.:2025024.01 有效期至 2003.09.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.11.11 IEC22.4 S3:1995+A1:1999+IEC60245-4: 1994+A1:1997 Prepared by Tonyfeng Page:144 / Total Page:250 Issued Data: 03/06/24

Rated voltage: 300/300V Tested cord: H03RT-F 3G 0.75&1.0mmsq Types: H03RT-F 7) Certificate No.: 98.2909.02 Issued date: 1998.10.01 3G 0.75~1.0sqmm HD 22.4 S3: 1995+NBN HD 022.4 Tested cord: H05RN-F 2X1.0 and 3G 0.75mmsq Rated voltage: 300/500V Types: H05RN-F 2~3X0.75-1.0mmsq 8) Certificate No.: 98.2909.01 Issued date: 1998.10.01 HD 22.4 S3: 1995+NBN HD 022.4 Tested cord: H05RR-F 2X1.5 and 3G 0.75mmsq Rated voltage: 300/500V Types: H05RR-F 2~3X0.75-2.5mmsq 9) Certificate No.: 2008455.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.02.08 HD 21.12 S1: 1994+IEC60227-5 S2:1997+A1:1997 Tested cord: H05V2V2-F 2X 0.75mmsq Rated voltage: 300/500V Types: H05V2V2-F 2X0.75mmsq 10) Certificate No.: 2015544.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.01.25 HD 22.4 S3: 1995+A1:1999+IEC60245-4:1994 +A1:1997. Tested cord: H07RN-F 2X1.5 and 3G 1.0mmsq Rated voltage: 450/750V Types: H07RN-F 2~3X1.0-2.5mmsq Prepared by Tonyfeng Page:145 / Total Page:250 Issued Data: 03/06/24

4.2 Cord extension set, non-rewirable, with portable outlet, 2-pole. 1) Certificate No.: 2028106.03 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2003.03.28 IEC 60884-1: 1994+A1:94+A2:95 CE-511/CE-604 16A, 250V~ 4.3 Cord set(supply cord) H05RR-F 3G 1.0~1.5mmsq H05RN-F 3G 1.0mmsq H07RN-F 3G 1.0~1.5mmsq 1) Certificate No.: 98.2882.03 Product: Supply cords, 2-pole. Complete cord set for class II appliances. Issued date: 1998.10.12 EN 60799:1987+NBN C 61-799 CE-503/CE-605 Remarks: CE-503 2.5A, 250V~ CE-605 0.2A, 250V~ H03VH-Y 2X 0.1mmsq 2) Certificate No.: 2012497.02 Product: This certificate is also based on CB test certificate DE 1-6611. Supply cords, 2-pole. Complete cord set for class I appliances. Issued date: 2001.08.16 EN 60799:1998 Prepared by Tonyfeng Page:146 / Total Page:250 Issued Data: 03/06/24

CE-502/CS-001A CE-502 16A, 250V~ CS-001A 10A, 250V~ 4.4 Plug non-rewirable H05RR-F 3X 1.0mmsq 1) Certificate No.: 2023881.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.09.20 Product: IEC60884-1:1994+A1:1994+A2:1995 Plug 2-pole with dual earthing contacts, non-rewirable. Straight type, body of thermoplastic material as part of an incomplete cord set for class I appliance. CE-501 16A, 250V~. Standard sheet: VII H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75~1.5mmsq H03RT-F 3G 0.75~1.0mmsq H05RR-F 3G 0.75~1.5mmsq 2)Certificate No.: 2028930.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2003.04.23 Product: IEC60884-1:1994+A1:1994+A2:1995 Plug 2-pole with dual earthing contacts, non-rewirable. Angled type, body of thermoplastic material as part of an incomplete cord set for class I appliance. CE-502 Prepared by Tonyfeng Page:147 / Total Page:250 Issued Data: 03/06/24

16A, 250V~. Standard sheet: VII H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75~1.5mmsq H05RN-F 3G 0.75~1.0mmsq H03RT-F 3G 0.75~1.0mmsq H05RR-F 3G 0.75~1.5mmsq Cord termination: Crimped and/or soldered connection. 3) Certificate No.: 2023881.03 Issued date: 2002.09.20 Product: version. IEC60884-1:1994+A1:94+A2:95 Plug 2-pole with dual earthing contacts, non-rewirable, angled Body of thermoplastic material as part of an incomplete cord set for class I appliance. CE-502N 16A, 250V~. Standard sheet: VII H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75~1.5mmsq H03RT-F 3G 0.75~1.0mmsq 4) Certificate No.: 2013325.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.08.08 Product: EN50075:1990+NBN C61 075 Plug 2-pole, pin support in different designs, non-rewirable. Body of thermoplastic material as part of an incomplete cord set for class II appliance. Prepared by Tonyfeng Page:148 / Total Page:250 Issued Data: 03/06/24

CE-503 2.5A, 250V~ Standard sheet: I H03VH-Y H03VVH2-F H03VV-F H05VVH2-F Cord termination: 2X0.5~0.75mmsq 2X0.75mmsq 2X 0.75mmsq Crimped and/or soldered connection. 5) Certificate No.: 99.7537.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2000.02.02 Product: EN50075:1990 Plug 2-pole, non-rewirable. Body of thermoplastic material as part of an incomplete cord set for class II appliance. CE-503B 2.5A, 250V~. Standard sheet: I H03VVH2-F 6) Certificate No.: 2013325.02 2X0.75mmsq Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.08.08 Product: IEC 60884-1:1994+A1:1994+A2:1995 Plug 2-pole, without earthing contact, non-rewirable. Body of thermoplastic material as part of an incomplete cord set for class II appliance. Prepared by Tonyfeng Page:149 / Total Page:250 Issued Data: 03/06/24

CE-504 16A, 250V~ Standard sheet: XVII(maximum outline) H03VVH2-F H05VV-F H05VVH2-F Cord termination: 2X0.75mmsq 2X0.75~1.0mmsq 2X 0.75mmsq Crimped and soldered connection. 7) Certificate No.: 2017731.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.03.04 Product: IEC60884-1:1994+A1:1994+A2:1995 Plug 2-pole, non-rewirable. Body of thermoplastic material as part of an incomplete cord set for class II appliance. CE-510 16A, 250V~. Standard sheet: XVII(maximum outline) H05VV-F H05RN-F H07RN-F Cord termination: 2X0.75~1.0mmsq 2X0.75~1.0mmsq 2X1.0mmsq Crimped and soldered connection. 8) Certificate No.: 2028106.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2003.03.28 Product: IEC60884-1:1994+A1:1994+A2:1995 Plug 2-pole, non-rewirable, with dual earthing contacts. Body of thermoplastic material as part of an incomplete cord set for classi Prepared by Tonyfeng Page:150 / Total Page:250 Issued Data: 03/06/24

appliance. CE-511 16A, 250V~. Standard sheet: VII Pin support: Taller or GEM H05RN-F 3G 0.75~1.0mmsq H05RR-F 3G 1.0~1.5mmsq H07RN-F Cord termination: 3G 1.0~1.5mmsq Crimped and soldered connection. 9) Certificate No.: 2017726.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.02.20 Product: IEC60884-1:1994+A1:1994+A2:1995 Plug 2-pole, non-rewirable, with dual earthing contacts, angled type. Body of thermoplastic material as part of an incomplete cord set for class I appliance. CE-512 16A, 250V~. Standard sheet: VII Pin-support: Taller GmbH, GEM. H03VV-F 3G 0.5mmsq H05RN-F H07RN-F Cord termination: 3G 0.75~1.0mmsq 3G 1.0~1.5mmsq Crimped and soldered connection. 10) Certificate No.: 99.7966.01 Issued date: 2000.07.28 IEC60884-1:1994+A1:1994+A2:1995 Prepared by Tonyfeng Page:151 / Total Page:250 Issued Data: 03/06/24

Product: Plug 2-pole, non-rewirable, splash proof construction Body of thermoplastic material as part of an incomplete cord set for class II appliance. CE-513 16A, 250V~. Standard sheet: XVII(maximum-outline) H05RN-F Cord termination: 2X 0.75~1.0mmsq Crimped or soldered connection. 11) Certificate No.: 2015945.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.06.20 Product: IEC60884-1:1994+A1:1994+A2:1995 Plug 2-pole, with dual earthing contacts, non-rewirable, splash proof construction: IP24. Body of thermoplastic material as part of an incomplete cord set for classi appliance. CE-513G 16A, 250V~. Standard sheet: VII H05RN-F Cord termination: 3G 1.0mmsq Crimped and soldered connection. 4.5 Appliance plug connector. 1) Certificate No.: 98.0689.01 Issued date: 1998.05.13 Product: EN60320-2-2:1991+NBN C61 320-2-2 Appliance plug connectors; 2-pole with earthing contact, non-rewirable Prepared by Tonyfeng Page:152 / Total Page:250 Issued Data: 03/06/24

Body of thermoplastic material as part of an incomplete cord set for class I appliance. Rated current/voltage: 10A, 250V~ Standard sheet: E Type: CE-045 Rated temperature: T70 H05VV-F 3G0.75mmsq 2) Certificate No.: 2012497.01 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.06.26 Product: EN60320-1:1996+A1:96+A2:98 Appliance connectors; 2-pole with earthing contact, non-rewirable Body of thermoplastic material as part of an complete or incomplete cord set for class I appliance. Rated current/voltage: 10A, 250V~ Standard sheet: C15 Type: CS-001A Rated temperature: T120 H05RR-F 3G1.0mmsq 3) Certificate No.: 94.8674.01 Issued date: 1994.07.12 NBN C 61 320-1+EN60320-1. Product: Appliance connectors 2-pole, with earthing contact, non-rewirable. Body of thermoplastic material as part of a incomplete cord set for class I appliances. CE-601 Prepared by Tonyfeng Page:153 / Total Page:250 Issued Data: 03/06/24

10A, 250V~ Standard sheet: C13 Temperature: Remark T65 H05VV-F 3G 0.75~1.0mmsq This report is also based on the CB Test Certificate DE-4136. 4) Certificate No.: 98.0769.01 Issued date: 1998.05.11. Product: EN 60320-1:1996 Appliance connectors 2-pole, non-rewirable. Body of thermoplastic material as part of a incomplete cord set for class II appliances. CE-602 2.5A, 250V~ Standard sheet: C7 Temperature: T70 H05VVH2-F 2X0.75mmsq 5) Certificate No.: 95.3316.01 Issued date: 1995.06.12. Product: NBN C 61 320-1. Appliance connectors 2-pole, non-rewirable. Body of thermoplastic material as part of a incomplete cord set for class II appliances. CE-602 2.5A, 250V~ Standard sheet: C7 Temperature: T65 Prepared by Tonyfeng Page:154 / Total Page:250 Issued Data: 03/06/24

H03VVH2-F 2X0.75mmsq Cord termination: Crimped connection 6) Certificate No.: 98.2882.01 Issued date: 1998.10.12 Product: EN 60320-1:1996 Appliance connectors 2-pole, non-rewirable. Body of thermoplastic material as part of a incomplete cord set for class II appliances. CE-605 0.2A, 250V~ Standard sheet: C1 Temperature: T70 H03VH-Y 2X0.1mmsq 7) Certificate No.: 99.8435.01 Issued date: 2000.05.19 Product: EN 60320-1:1996 Appliance connectors 2-pole, non-rewirable, with earthing contact Body of thermoplastic material as part of a incomplete cord set for class I appliances. CE-608 2.5A, 250V~ Standard sheet: C5 H03VV-F H05VV-F Cord termination: Crimped connection. 3G 0.75mmsq 3G 0.75mmsq Prepared by Tonyfeng Page:155 / Total Page:250 Issued Data: 03/06/24

4.6 Socket-outlet, non-rewirable, portable 1) Certificate No.:97.3609.01 Issued date: 1997.09.09 Product; NBN C61-112-1 + NBN C61-112-2 Portable socket-outlet, 2 pole with earthing pin, non-rewirable. Body of thermoplastic material as part of an incomplete cord set for class I appliances. Standard sheet: V CE-603 16A, 250V~ H05VV-F 3G 1.0~1.5mmsq 2) Certificate No.: 2028106.02 Application: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2003.03.28 Product; IEC 60884-1:94+A1:94+A2:95 Portable socket-outlet, 2 pole with side earthing contacts, non-rewirable. Body of thermoplastic material as part of an incomplete cord set for class I appliances. Standard sheet: III CE-604 16A, 250V~ Cord termination: H05VV-F 3G 1.0~1.5mmsq H05RR-F 3G 1.0~1.5mmsq H05RN-F 3G 1.0mmsq H07RN-F 3G 1.0~1.5mmsq Crimped and soldered connection. Prepared by Tonyfeng Page:156 / Total Page:250 Issued Data: 03/06/24

Item 17 瑞典 SEMKO 認証產品 1. 術語名詞 ETL SEMKO ETL SEMKO Sweden is one of Intertek's many international locations that helps you to sell your products in markets throughout the world. Please note that the legal name of ETL SEMKO Sweden is Intertek Semko AB. The company has more than 75 years of experience in independent testing and certifications. Intertek Semko AB is accredited by SWEDAC and Notified Body (no. 0413) for several of the EU's different directives. SWEDAC SWEDAC, the Swedish Board for Accreditation and Conformity Assessment. SWEDAC is a Swedish public authority, responsible to the Ministry for Foreign Affairs. In addition to its statutory duties, it also performs a number of commercially based activities. Its main duty is to be the national accreditation body. Accreditation, which involves determination of the competence of organizations to perform their duties or work, covers laboratories, certification bodies, and inspection bodies concerned with analysis, testing, calibration, certification and inspection in various sectors. SWEDAC works nationally and internationally to further the harmonization of the principles of analysis, testing, calibration, certification and inspection in the interests of greater safety and the encouragement of free trade. 2. 申請者資料 Applicant: Manufacturer: Factory location: 3 SEMKO 認証產品概況. R & L Company or Chau s Electrical Co., Ltd.(Hong Kong) Chau s Electrical Co., Ltd.(Hong Kong) Chau s Electrical Co., Ltd.(Dong Guan) 已取得認證的產品分為 5 類, 分別為 : 2) Flexible cable(cord). 證書有 9 份, 型號有 12 個. H03RT-F H03VH-Y H03VH-H H03VV-F H03VVH2-F H05VV-F H05VVH2-F H05RR-F Prepared by Tonyfeng Page:157 / Total Page:250 Issued Data: 03/06/24

A05RR-F H05V2V2-F H07RN-F A07RN-F 2) Cord extension set, non-rewirable. 3) Cord set 證書有 1 份, 型號有 1 個. CE-511/CE-604 證書有 1 份, 型號有 1 個. CE-503/CE-605 4) Plug non-rewirable 證書有 9 份, 型號有 8 個. CE-501 CE-502 CE-502N CE-503 CE-504 CE-510 CE-511 CE-512 5)Connector, non-rewirable 4. 認証產品描述證書有 3 份, 型號有 3 個 CE-045 CE-601 CE-602 4.1 Flexible cable and cords. 1) Certificate No.: 202069 有效期至 2011.12.31 Issued date: 2002.10.01. Product: Types: HD22.4 S3:1995+A1 Rubber insulated cord and flexible cable H03RT-F 3X0.75~1.0mmsq LVD information: The product satisfies the provisions for CE marking according to the Low Voltage Directive 73/23/EEC and 93/68/EEC. Prepared by Tonyfeng Page:158 / Total Page:250 Issued Data: 03/06/24

2) Certificate No.: 9814144/01 有效期至 2008.12.31 Issued date: 1998.04.16. Product: Types: HD21.5 S3 PVC insulated cord and flexible cable H03VH-Y LVD information: The product satisfies the provisions for CE marking according to the Low Voltage Directive 73/23/EEC and 93/68/EEC. 3) Certificate No.: 9549298/01 有效期至 2003.12.31 Issued date: 1995.12.13. Product: Types: HD21.5 S3 Flat non-shealthed cord H03VH-H 2X0.5~0.75mmsq 4) Certificate No.: 9526017 有效期至 2004.12.31 Issued date: 1995. Product: Types: HD21.5 S3 Light PVC-shealthed cord H03VV-F 2~3X0.5~0.75mmsq H03VVH2-F 2X0.5~0.75mmsq 5) Certificate No.: 9409231 有效期至 2004.12.31 Issued date: 1994. Product: Types: HD21.1 S2 + HD21.2 S2 + HD21.5 S2 Ordinary PVC-shealthed cord H05VV-F 2~5X0.75~2.5mmsq 6) Certificate No.: 9549299/01 有效期至 2004.12.31 Issued date: 1995.12.13 Prepared by Tonyfeng Page:159 / Total Page:250 Issued Data: 03/06/24

Product: Types: HD21.5 S3 Ordinary PVC-shealthed cord H05VVH2-F 2X0.75~1.0mmsq 7) Certificate No.: 0052069/01-04 有效期至 2010.12.31 Issued date: 2001.01.03 Product: Types: HD22.4 S3:1995+A1:1999 Rubber insulated cord and flexible cable H05RR-F A05RR-F LVD information: 2X0.75~2.5mmsq, 3~4G 0.75~6.0mmsq, 5G 0.75~2.5mmsq 5X 1.5~2.5mmsq The product satisfies the provisions for CE marking according to the Low Voltage Directive 73/23/EEC and 93/68/EEC. 8) Certificate No.: 0113227/01 有效期至 2011.12.31 Issued date: 2001.04.11 Product: Types: HD21.12 S1:1994 PVC insulated cord and flexible cable H05V2V2-F LVD information: 2X0.75mmsq The product satisfies the provisions for CE marking according to the Low Voltage Directive 73/23/EEC and 93/68/EEC. 9) Certificate No.: 0120264/01-03 有效期至 2010.12.31 Issued date: 2001.05.30 Product: Types: HD22.4 S3:1995+A1:1999 Rubber insulated cord and flexible cable H07RN-F A07RN-F 2X1.0~2.5mmsq, 3~5G 1.0~2.5mmsq 3~5X 1.0~2.5mmsq Prepared by Tonyfeng Page:160 / Total Page:250 Issued Data: 03/06/24

LVD information: The product satisfies the provisions for CE marking according to the Low Voltage Directive 73/23/EEC and 93/68/EEC. 4.2 Cord extension set, non-rewirable. 1) Certificate No.: 200414 有效期至 2012.12.31 Issued date: 2002.05.21 IEC60884-1:1994 and A1, A2 CEE7/III, VII CE-511/CE-604 16A, 250V~ IP class: 20 LVD information: 4.3 Cord set H05RR-F 3G 1.0~1.5mmsq H07RN-F 3G 1.5mmsq The product satisfies the provisions for CE marking according to the Low Voltage Directive 73/23/EEC and 93/68/EEC. 1) Certificate No.: 9841040/01 有效期至 2008.12.31 Issued date: 1998.10.23 IEC 60799:1984+A1:1993+A2:1995 CE-503/CE-605 Plug 2.5A, 250V~, Connector 0.2A, 250V. Design code: 99TP IP class: 20 LVD information: H03VH-Y 2X 0.1mmsq The product satisfies the provisions for CE marking according to the Low Voltage Directive 73/23/EEC and 93/68/EEC. 4.4 Plug non-rewirable 1) Certificate No.: 9903015/01-06 有效期至 : 2008.12.31 Issued date: 1999.02.05 Prepared by Tonyfeng Page:161 / Total Page:250 Issued Data: 03/06/24

CEE7 with Mod1-4, VII Product: Plug with cord CE-501, CE-502, CE-502N 16A, 250V~(10A 250V DC) Number of poles: Two poles with dual earthing contact system IP Class: 20 Design Code: CE-501, CE-502 CE-502N. 99TP(All colors, thermoplastic material) H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75~1.5mmsq H03RT-F 3G 0.75~1.0mmsq H05RR-F 3G 0.75~1.5mmsq H03VV-F 3G 0.75mmsq H05VV-F 3G 0.75~1.5mmsq H03RT-F 3G 0.75~1.0mmsq 2) Certificate No.: 202552 有效期至 : 2012.12.31 Issued date: 2002.10.25 Product: Plug non-rewirable IEC60884-1:1994 + CEE7/VII CE-501, CE-502, CE-502N for class I equipment. 16A, 250V~(10A 250V DC) Number of poles: Two poles with dual earthing contact system IP Class: 20 H03RT-F 3G 0.75mmsq 3) Certificate No.: 0144057/01 有效期至 : 2011.12.31 Issued date: 2001.10.31 EN50075/I Prepared by Tonyfeng Page:162 / Total Page:250 Issued Data: 03/06/24

Product: Plug non-rewirable CE-503. 2.5A, 250V~ IP Class: 20 H03VH-Y H03VV-F H03VVH2-F H05VVH2-F 2X0.1mmsq 2X 0.75mmsq 2X 0.5~0.75mmsq 2X 0.75mmsq 4) Certificate No.: 9706193/01 有效期至 : 2003.12.31 Issued date: 1997.02.13 Product: CEE7: 1963+A1~4 Plug, non-rewirable for class II equipment CE-504. 10-/16A~, 250V IP Class: 20 Design Code: 99TP(All colors, thermoplastic material) H05VVH2-F 2X 1.0mmsq( 其它被 0142284/01 取代 ) 5) Certificate No.: 0142284/01 有效期至 : 2011.12.31 Issued date: 2001.10.29 Product: Plug with cord CE-504. 10-/16A~, 250V IP Class: 20 Design Code: IEC 60884-1:1994+A1+A2, CEE7/XVII 99TP(All colors, thermoplastic material) H03VVH2-F 2X 0.75mmsq Prepared by Tonyfeng Page:163 / Total Page:250 Issued Data: 03/06/24

H05VVH2-F 2X 0.75mmsq H05VV-F 2X 0.75~1.0mmsq 6) Certificate No.: 0118246/01-02 有效期至 : 2011.12.31 Issued date: 2001.05.15 Product: Plug non-rewirable CE-510 16A, 250V~ H05VV-F H05RN-F IEC60884-1:1994+A1:1994+A2:1995+CEE7 Sheet XVII 2X 0.75~1.0mmsq 2X 0.75~1.0mmsq 7) Certificate No.: 200506 有效期至 : 2012.12.31 Issued date: 2000.03.17 Product: Plug, non-rewirable IEC60884-1:1994+A1:1994+A2:1995+CEE7 Sheet XVII CE-510 for class II equipment 16A, 250V~ IP class: 20 H07RN-F 2X 1.5mmsq 8) Certificate No.: 200507 有效期至 : 2012.12.31 Issued date: 2000.06.05 Product: IEC60884-1:1994+A1:1994+A2:1995+CEE7 SheetVII Two pole plug with dual earthing contacts, non-rewirable CE-511 for class II equipment 16A, 250V~ IP class: 20 H07RN-F 3G 1.5mmsq Prepared by Tonyfeng Page:164 / Total Page:250 Issued Data: 03/06/24

9) Certificate No.:0211252/01-02 有效期至 : 2012.12.31 Issued date: 2000.06.05 Product: Plug, non-rewirable CE-512. 16A, 250V~ IP class: 20 H03VV-F H05RN-F H07RN-F 4.5 Plug connector, non-rewirable IEC60884-1:1994+A1:1994+A2:1995+CEE7 SheetVII 3G0.5mmsq 3G 0.75~1.0mmsq 3G 1.0~1.5mmsq 1) Certificate No.: 9544126/01 有效期至 2005.12.31 Issued date: 1995.11.01 EN60320-2-2:1991 Rated current & Ratted Voltage: 10A 250V~ IP Class: 20 Design Code: 99TP(All colors, thermoplastic material) Type CE-045 Cord: H05VV-F 3G0.75mmsq 2) Certificate No.: 9409103 有效期至 2004.12.31 Issued date: 1994 EN60320 C13 Rated current & Ratted Voltage: 10A 250V~ IP Class: 20 Design Code: 99TP(All colors, thermoplastic material) Type CE-601 H05VV-F 3G0.75~1.0mmsq 3) Certificate No.: 9429008 有效期至 2004.12.31 Prepared by Tonyfeng Page:165 / Total Page:250 Issued Data: 03/06/24

Issued date: 1994 EN60320 C7 Rated current & Ratted Voltage: 2.5A 250V~ IP Class: 20 Design Code: 99TP(All colors, thermoplastic material) Type CE-602 H03VVH2-F 2X0.5~0.75mmsq H05VVH2-F 2X0.75mmsq Prepared by Tonyfeng Page:166 / Total Page:250 Issued Data: 03/06/24

Item 18 瑞士 SEV 認証產品 1. 術語名詞 SEV---Schweizerischer Elektrotechnischer Verein( 瑞士電工協會 ) SEV offers with TSM Total Security Management an integral approach to the solution concerning problems related to safety, quality, environment and also the risks for products and processes. This exclusive service stands for the certainty concerning the safe manufacturing / production, distribution / allocation and application of equipment / services of the energy- and information technology. The complete catalogue of services includes advisory functions, qualification in management and training, synchronized across three categories. 2. 申請者資料 Applicant: Manufacturer: 3 SEV 認証產品概況. R & L Company or Chau s Electrical Co., Ltd.(Hong Kong) Chau s Electrical Co., Ltd.(Hong Kong) 已取得認證的產品分為 4 類, 分別為 : 1)Flexible cable(cord). 2) Cord set 證書有 5 份, 型號有 10 個. H03RT-F H03VH-Y H03VH-H H03VV-F H03VVH2-F H05VV-F H05VVH2-F H05V2V2-F H05RR-F H05RN-F 證書有 1 份, 型號有 1 個. CE-503/CE-605 3) Plug non-rewirable 證書有 4 份, 型號有 3 個. CE-503 CE-507 CE-509 4)Connector, non-rewirable 證書有 3 份, 型號有 3 個 Prepared by Tonyfeng Page:167 / Total Page:250 Issued Data: 03/06/24

CE-045 4. 認証產品描述 CE-601 CE-602 4.1 Flexible cable and cords. 1) Certificate No.: 98.7 70681.01 有效期至 2003.10.12 Issued date: 1998.10.12. Types: H05RR-F 2X0.75~2.5mmsq, 3G 0.75~2.5 H05RN-F 2X0.75~1.0mmsq, 3G 0.75~1.0 2) Certificate No.: 98.7 70819.01 有效期至 2003.12.15 Issued date: 1998.12.15. Types: H03RT-F 2X0.75~1.5mmsq, 3G 0.75~1.5 3) Certificate No.: 03.0355 有效期至 2008.03.26 Issued date: 2003.03.27 Types: H03VH-Y 4) Certificate No.: 00.1249 有效期至 2005.07.16 Issued date: 2000.07.17 Types: H03VH-H H03VVH2-F H03VV-F H05VVH2-F H05VV-F 2X0.5~0.75mmsq 2X0.5~0.75mmsq 2~4X0.5~0.75mmsq 2X0.75~1.0mmsq 2~5X0.75~2.5mmsq 5) Certificate No.: 01.0338 有效期至 2006.02.26 Issued date: 2001.02.27 Types: 4.2 Cord set H05V2V2-F 2X0.75mmsq 1) Certificate No.: 98.6 60064.01 有效期至 2003.09.21 Issued date: 1998.09.21 CE-503/CE-605 0.2A, 250V. Prepared by Tonyfeng Page:168 / Total Page:250 Issued Data: 03/06/24

H03VH-Y 2X 0.1mmsq( 長度不超過 2m) 4.3 Plug non-rewirable 1) Certificate No.: 01.1221 有效期至 : 2006.08.27 Issued date: 2001.08.28 CE-503, L+N 2.5A, 250V~ H03VH-Y H03VV-F H03VVH2-F H05VVH2-F 2X 0.75mmsq 2X 0.5~0.75mmsq 2X 0.75mmsq 2) Certificate No.: 02.1245 有效期至 : 2007.10.17 Issued date: 2002.10.18 CE-507, L+N+PE 10A, 250V~ H03VV-F H05VV-F H05RR-F 3G 0.75mmsq 3G 0.75~1.5mmsq 3G 1.0mmsq 3) Certificate No.: 03.0828 有效期至 : 2008.05.27 Issued date: 2003.05.28 CE-507, L+N+PE 10A, 250V~ H05RN-F H05RR-F 3G 0.75~1.0mmsq 3G 0.75mmsq 4) Certificate No.: CH-98.1 10456 有效期至 : 2003.10.31 Issued date: 1999.05.04 CE-509, L+N 10A, 250V~ Prepared by Tonyfeng Page:169 / Total Page:250 Issued Data: 03/06/24

H03VV-F H05VV-F H05RN-F H05RR-F H03VVH2-F H05VVH2-F 4.4 Plug connector, non-rewirable 2X0.75mmsq 2X 0.75~1.0mmsq 2X1.0mmsq 2X1.0mmsq 2X0.75mmsq 2X0.75mmsq 1) Certificate No.: 00.1788 有效期至 2005.09.28 Issued date: 2000.09.29 Rated current & Ratted Voltage: Type: 10A 250V~ CE-045, L+N+PE H05VV-F 3G0.75mmsq 2) Certificate No.: 02.0417 有效期至 2007.04.10 Issued date: 2002.04.11 Rated current & Ratted Voltage: Type: 10A 250V~ CE-601, L+N+PE H05VV-F 3G0.75~1.0mmsq 3) Certificate No.: 03.0610 有效期至 2008.05.25 Issued date: 2003.05.26 Rated current & Ratted Voltage: Type: 2.5A 250V~ CE-602, L+N H03VVH2-F H05VVH2-F 2X0.5~0.75mmsq 2X0.75mmsq Prepared by Tonyfeng Page:170 / Total Page:250 Issued Data: 03/06/24

Item 19 比利時 CEBEC 認証產品 1. 術語名詞 CEBEC Located in Brussels, capital and heart of Europe, CEBEC is an independent service company providing products and systems certification, CE Marking assistance, training, advise, for manufacturing industries, business and authorities. 2. 申請者資料 Applicant: R & L Company or Chau s Electrical Co., Ltd.(Hong Kong) ( 未注明的証書持有為 R&L Company) Manufacturer(Licensee): Chau s Electrical Co., Ltd.(Hong Kong) Factory location: 3 CEBEC 認証產品概況. 已取得認證的產品分為 5 類, 分別為 : 1)Flexible cable(cord). 2)Cord set 證書有 5 份, 型號有 10 個 H03RT-F H03VH-Y H03VH-H H03VV-F H03VVH2-F H05VV-F H05VVH2-F H05V2V2-F H05RR-F H05RN-F 證書有 1 份, 型號有 1 個 CE-503/CE-605 3)Plug non-rewirable 證書有 9 份, 型號有 11 個. CE-501 CE-502 CE-502N CE-503 CE-504 CE-504S with normal cable entry CE-504S with long cable entry Chau s Electrical Co., Ltd.(Dong Guan) Prepared by Tonyfeng Page:171 / Total Page:250 Issued Data: 03/06/24

CE-510 CE-511 CE-512 CE-513 4)Connector, non-rewirable 證書有 6 份, 型號有 4 個. CE-045 CE-601 CE-602 CE-605 5) Socket-outlet, non-rewirable, portable 4. 認証產品描述證書有 1 份, 型號有 1 個 CE-603 4.1 Flexible cable and cords. 1)Licence No.:11065 Issued date: 1999.02.25 HD 22.4 S3: 1995 Rated voltage: 300/300V Types: H03RT-F 2)Licence No.:8807 Issued date: 1995.07.03 Types: NBN-HD 021.5 S2 Falt non-sheathed cords: H03VH-H 2~3X0.75~1.5sqmm Light PVC sheathed cords: H03VVH2-F H03VV-F 2X0.5~0.75sqmm 2X0.5~0.75mmsq. Ordinary PVC sheathed cords: H05VVH2-F H05VV-F 3)Licence No.:8807/1 Issued date: 1998.05.07 Product: 2X0.5~0.75mmsq, 3G0.50~0.75. 2X0.75~1.0mmsq. 2X0.75~1.5mmsq, 3G0.75~2.5. Prepared by Tonyfeng Page:172 / Total Page:250 Issued Data: 03/06/24

PVC insulated flexible cords, flat tinsel cord. HD 21.3 S3 Rated voltage: 300/300V Types: H03VH-Y 4)Licence No.:12096 Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.04.05 HD 21.12 S1: 1994 Rated voltage: 300/500V Types: H05V2V2-F 5)Licence No.:8807/2 Issued date: 1998.10.14 Product: 2X0.75sqmm Rubber insulated flexible cable and cords HD 22.4 S3 Rated voltage: 300/500V Types: 4.2 Cord set H05RR-F H05RN-F 1) Licence No.: 10937 Issued date: 1998.11.23 EN60799: 1997 CE-503/CE-605 2~3X0.75~2.5sqmm 2~3X0.75~1.0sqmm Connector 0.2A, 250V~, plug 2.5A, 250V~ Plug type : standard sheet I Connector type : standard sheet C1 H03VH-Y 4.3 Plug non-rewirable 2X 0.1mmsq Prepared by Tonyfeng Page:173 / Total Page:250 Issued Data: 03/06/24

1)Licence No.: 11001---Issue No.2 Issued date: 2003.03.06 Product: Plug two pole with dual earthing contacts for class I appliances NBN C61-112-1:1990+A1, A2, A3 A4, Standard sheet VII CE-501, CE-502 16A, 250V~ H03VV-F H03RT-F H05VV-F H05RR-F Cord termination: Crimped connection. Description: 3G0.75mmsq 3G0.75~1.0mmsq 3G0.75~1.5mmsq 3G0.75~1.5mmsq Body of thermoplastic material as part of an incomplete cord set for class I appliances. 2)Licence No.: 10938 Issued date: 1998.11.23 Product: Plug two pole with dual earthing contacts for class I appliances NBN C61-112-1, VII CE-502N 16A, 250V~ H03VV-F H05VV-F H03RT-F Cord termination: Crimped connection. Description: 3G0.75mmsq 3G0.75~1.5mmsq 3G0.75~1.0mmsq Body of thermoplastic material as part of an incomplete cord set for class I Prepared by Tonyfeng Page:174 / Total Page:250 Issued Data: 03/06/24

appliances. 3)Licence No.: 12310 Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.09.10 Product: Plug two pole for class II household purposes NBN C61-075,EN50075, sheet I CE-503 2.5A, 250V~ H03VH-Y H03VVH2-F H03VV-F H05VVH2-F Cord termination: 2X0.5~0.75mmsq 2X0.75mmsq 2X0.75mmsq Crimped and/or soldered connection. 4)Licence No.: 12312 Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2001.09.10 Product: Plug two pole for class II household purposes NBN C61-112-1, sheet XVII(max. outline) CE-504 16A, 250V~ H03VVH2-F H05VVH2-F H05VV-F Cord termination: 2X0.75mmsq 2X0.75mmsq Crimped and soldered connection. 5)Licence No.: 12312/1 2X0.75~1.0mmsq Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Prepared by Tonyfeng Page:175 / Total Page:250 Issued Data: 03/06/24

Issued date: 2001.09.10 Product: Plug two pole for class II household purposes NBN C61-112-1, sheet XVII(max. outline) CE-504S with long cable entry CE-504S with normal cable entry 16A, 250V~ CE-504S with long cable entry H03VVH2-F H05VV-F 2X0.5mmsq 2X0.75mmsq CE-504S with normal cable entry H03VH-H H05VV-F H03VVH2-F H05VVH2-F Cord termination: Crimped connection. 6)Licence No.: 12585 2X0.5~0.75mmsq 2X0.75~1.0mmsq 2X0.75mmsq 2X0.75~1.0mmsq Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.04.15 Product: Plug two pole for class II household purposes NBN C61-112-1, XVII(maximum outline) CE-510 16A, 250V~ H05VV-F H05RN-F Cord termination: H07RN-F 2X1.0mmsq Crimped and soldered connection. 2X0.75~1.0mmsq 2X0.75~1.0mmsq Prepared by Tonyfeng Page:176 / Total Page:250 Issued Data: 03/06/24

7)Licence No.: 12584 Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.04.15 Product: Plug two pole with earthing contacts for class I household purposes NBN C61-112-1, VII CE-511 16A, 250V~ H05RN-F H05RR-F H07RN-F Cord termination: 3G0.75~1.0mmsq 3G1.0~1.5mmsq 3X1.5mmsq Crimped and soldered connection. 8)Licence No.: 12104/1 Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.03.11 Product: Plug two pole with earthing contacts for class I household purposes NBN C61-112-1, sheet VII CE-512 angled type 16A, 250V~ H03VV-F H05RN-F H07RN-F Cord termination: 3G0.75mmsq Crimped and soldered connection. 9)Licence No.: 11809 Issued date: 2000.08.04 Product: 3G0.75~1.0mmsq 3G1.0~1.5mmsq Plug two pole without earthing contacts for class II household purposes Prepared by Tonyfeng Page:177 / Total Page:250 Issued Data: 03/06/24

NBN C61-112-1, sheet XVII(maximum outline) CE-513 16A, 250V~ H05RN-F Cord termination: 2X0.75~1.0mmsq Crimped and soldered connection. 4.4 Connector, non-rewirable 1) Licence No.: 9035 Issued date: 1995.11.23 Type CE-045, 10A, 250V~ Two poles with earthing contact Rated temperature: max65 2) Licence No.:12181/1 H05VV-F 3G0.75mmsq Applicant: Chau s Electrical Co., Ltd.(Hong Kong) Issued date: 2002.05.14 Product: Type: 3)Licence No.: 8122 Connectors 2 pole with earthing contact for class I appliances NBN EN 60320-1:2001 CE-601, 10A, 250V~ H05VV-F Issued date: 1994.03.01 Product: 3G0.75~1.0mmsq Two pole connector for class II appliances EN60320-1, sheet: C7 CE-602. 2.5A, 250V~ Prepared by Tonyfeng Page:178 / Total Page:250 Issued Data: 03/06/24

H03VVH2-F 2X0.75mmsq H05VVH2-F 4)Licence No.: 8122/1 Issued date: 1994.06.08 Product: 2X0.75mmsq Two pole connector for class II appliances EN60320-1, sheet: C7 CE-602. 2.5A, 250V~ 5)Licence No.: 8122/2 H03VVH2-F 2X0.5mmsq( 長度不超過 2m) Issued date: 1998.06.05 Product: Two pole connector for class II appliances EN60320-1, sheet: C7 CE-602. 2.5A, 250V~ H05VVH2-F Cord termination: Crimped connection Description: 2X0.75mmsq Body of thermoplastic material as part of a complete cord set for class II appliances. 6)Licence No.: 10936 Issued date: 1998.11.20 Product: Two pole connector for class II appliances EN60320-1, sheet: C1 Prepared by Tonyfeng Page:179 / Total Page:250 Issued Data: 03/06/24

CE-605 0.2A, 250V~ H03VH-Y Cord termination: Crimped connection 2X0.1mmsq 4.5 Socket-outlet, non-rewirable, portable 1)Licence No.: 10262 Issued date: 1997.10.22 Product: Two pole portable socket outlet with earthing pin NBN C61-112-1, CEE7/sheet V CE-603. 16A, 250V~ Cord termination: H05VV-F 3G1.0~1.5mmsq Crimped connection Description: Body of thermoplastic material as part of an incomplete cord set for class I appliances. Prepared by Tonyfeng Page:180 / Total Page:250 Issued Data: 03/06/24

Item 20 意大利 IMQ 產品認証 1. 術語名詞 IMQ Set up in 1951, following the initiative of Italy's main scientific and technical bodies, our company has been dealing with product safety and quality for the last 50 years, and since 1988 with company management systems too. Our core business is the certification of products and systems, but we also focus on other activities. In fact over the years we have diversified to become what we are today: a service company that supports businesses, that acts as a notified body for the main EU directives and also supplies testing and measurement services, provides assistance for technical and standardization issues, support for export, as well as offering training courses. 2. 申請者資料 Manufacturer: Manufacturing site: 3. 認証產品清單. 1)Cord or Cable 共有 4 份証書, 包含 6 個產品型號. H03RT-F H05RN-F H05RR-F H05VV-F H05VVH2-F H05V2V2-F 2)Non-rewirable PLUG 共有 3 份証書, 包含 3 個產品型號. CE-503 CE-505 CE-506 3) Plug connecor 共有 4 份証書, 包含 4 個產品型號. CE-045 CE-601 CE-602 CE-607 4. 認証產品祥細資料 4.1 Cord or Cable 1) Certificate No.:CA01.00130 Chau s Electrical Co., Ltd.(Hong Kong) Chau s Electrical Co., Ltd.(Dong Guan) Prepared by Tonyfeng Page:181 / Total Page:250 Issued Data: 03/06/24

Issued date: 2002.01.30 Product: Type: HD22.4 S3:1995+A1:1999 Braided rubber insulated cable H03RT-F 2) Certificate No.:A2774 Issued date: 1999.10.08 Product: Type: HD22.1 S3:1997 + HD22.2 S3:1997. Rubber sheathed flexible cable and/or ordinary PCP sheathed or other equivalentelastomer. H05RN-F, H05RR-F 3) Certificate No.:CA01.00072 Issued date: 2001.05.09 Product: Type: HD22.1 S3:1997 + HD22.2 S3:1997.+HD21.5S3:1994+A1:1999 PVC insulated cable H05VV-F, H05VVH2-F 4) Certificate No.:CA01.00131 Issued date: 2002.01.30 Product: Type: HD21.1 S3:1997 + HD21.2 S3:1997.+HD21.12S1:1994 PVC insulated cable H05V2V2-F 4.2 Non-rewirable PLUG 1) Certificate No.:EN130. Issued date: 1998.03.18 ECI 23-16-I Prepared by Tonyfeng Page:182 / Total Page:250 Issued Data: 03/06/24

CE-506, 2P+E S11 10A, 250V~ Degree of protection: IPX0 H03VV-F 3G 0.5mmsq( 線長不超過 2m) H05VV-F 3G 0.75~1.0mmsq H05RR-F Type of terminals: 3G 1.0mmsq MA = crimped connection Cable exit: Axial 2) Certificate No.:EF305 Issued date: 1995.02.28 Updated 2002.09.18 Replaces 1999.01.14 EN50075:1990 CE-503, 2P 2.5A, 250V~ Degree of protection: IPX0 H03VV-F 2X 0.75mmsq H03VVH2-F 2X 0.5~0.75mmsq H05VVH2-F 2X 0.75mmsq H03VH-Y Type of terminals: MA = crimped connection Cable exit: Note: Axial The above mentioned plugs may be realized with the white and black colors. The plugs manufactured in Shanghai are identified by a letter S. 3) Certificate No.:CA02.00707 Issued date: 2001.06.07 CEI 23-50-I Ed.1995 Prepared by Tonyfeng Page:183 / Total Page:250 Issued Data: 03/06/24

CE-505, 2P 10A, 250V~ Degree of protection: IPX0 H03VV-F 2X 0.75mmsq H05VV-F 2X 0.75~1.0mmsq H03VVH2-F 2X 0.75mmsq H05VVH2-F 2X 0.75mmsq H05RN-F H05RR-F Type of terminals: 2X 1.0mmsq 2X 1.0mmsq MA = crimped connection Cable exit: Straight 4.3 Plug connector 1) Certificate No.:EN175. Issued date: 1995.02.28 Updated 2002.12.09 Replaces 2002.04.23 EN60320-1:2001 CE-601, 2P+E, for cold conditions 10A, 250V~ H05VV-F 3G 0.75~1.0mmsq Type of terminals: MAS = crimped and soldered connection Cable exit: Straight 2) Certificate No.:EN176. Issued date: 1995.02.28 Updated 2002.02.15 Replaces 1998.09.02 EN60320-1:1996+A1;1996+A2:1998 CE-602, 2P, for cold conditions 2.5A, 250V~ Prepared by Tonyfeng Page:184 / Total Page:250 Issued Data: 03/06/24

H03VVH2-F 2X0.5~ 0.75mmsq H05VVH2-F 2X 0.75mmsq Type of terminals: MA = crimped connection Cable exit: Note: Axial The above mentioned connectors may be realized with white or black color. 3) Certificate No.:CA02.00706 Issued date: 2001.06.07 EN60320-1:1996+A1:1996+A2:1998 CE-607, 2P, for cold conditions 10A, 250V~ H05VV-F 2X 0.75mmsq Type of terminals: MAS = crimped and soldered connection Cable exit: Note: Straight The above mentioned connectors may be realized with white or black color. 4) Certificate No.:EI239 Issued date: 1996.09.06 EN60320-2-2:1991 CE-045, 2P+E. 10A, 250V~ H05VV-F 3G 0.75mmsq Type of terminals: MA = crimped connection Cable exit: Axial Prepared by Tonyfeng Page:185 / Total Page:250 Issued Data: 03/06/24

Item 21 加拿大 CSA 產品認証 1. 術語名詞 CSA The Canadian Standards Association is a not-for-profit membership-based association serving business, industry, government and consumers in Canada and the global marketplace. As a solutions-oriented organization, we work in Canada and around the world to develop standards that address real needs, such as enhancing public safety and health. Advancing the quality of life. Helping to preserve the environment. Facilitating trade. We help people understand standards through education and information products and services. Each year, thousands of people benefit from the training materials, workshops and seminars offered by the CSA Learning Center 2. CSA 的 CLASS NUMBER 簡介 CLASS NUMBER: 5831-01 DESCRIPTION: WIRES-Flexible Cord February 18, 2002(Replaces:May 5, 2000) COVERAGE: Flexible cords and cables, rated 300V or 600V and including: thermoset flexible cords and cables; thermoplastic flexible cords and cables; heater cords; tinsel cords; elevator travelling cables; range and dryer cords; cords for decorative lighting; hoistway cables. REQUIREMENTS: CSA Standard C22.2 No 49 Flexible Cords and Cables All types of certified flexible cords appearing in this classification are judged to comply with the applicable requirements of the CEC, Part I and the NFPA 70 National Electrical Code (NEC). MARKING: For flexible cords and cables: On the cable or cord: submittor's identification; type designation; Prepared by Tonyfeng Page:186 / Total Page:250 Issued Data: 03/06/24

temperature rating for products having a temperature rating higher than the lowest rating possible for the type; size and number of conductors; flame rating; CSA Mark. The following markings, where applicable: the abnormal low temperature rating for SJOW, SJOOW, SOW, SOOW, SJTW, SJTOW, SJTOOW, STW, STOW, STOOW, PXWT, and CXWT when rated - 50, -60 or -70C. Products rated only -40C may be marked; the word "SHIELDED" for cords that are provided with a shield; the words "STEEL CORE" if a steel core is provided; the type of material "TPE" for cords consisting of only TPE insulation and jacket if present; "GREEN CONDUCTOR FOR GROUNDING ONLY" or "GREEN CONDUCTOR WITH YELLOW STRIPES FOR GROUNDING ONLY" for Types SPT-1, SPT-2, SPT-3 and HPN cords. On reels, spools, coils, bundles or cartons: manufacturer's name; manufacturer's marker, if threads are used; month and year of manufacture; type designation; voltage rating; AWG size and number of conductors; for Type SPT-2 cords having conductors composed of No 30 AWG wires "FOR USE IN GENERAL USE EXTENSION CORD SETS ONLY "; for Types SPT-1 (20 AWG), PXT, "NOT FOR RETAIL SALE TO THE PUBLIC" ; "SMALL OR LARGE DIAMETER CORD IN PROCESS" and "NOT FOR GENERAL USE" for cords intended for moulded fittings and having diameters not meeting the diameter range specified in the standard; CSA Flexible Cord Label. In addition, equipment intended for display, sale or use in the USA, is required to include other information such as warning statements, installation instructions, etc., as may be specified in the NEC Material No. Denomination 1002069 15/50 1002070 50/ 1002071 1,500/5,000 Prepared by Tonyfeng Page:187 / Total Page:250 Issued Data: 03/06/24

1002066 75/250 1002067 150/500 1002068 300/1,000 NON-DENOMINATION Material No. 1002072. Colour: Top - Black on Yellow Bottom - Black on White Size: 5.4cm (2-1/8 in) by 3.2cm (1-1/4 in) CLASS NUMBER: 5835-01 DESCRIPTION: WIRES-Equipment February 15, 2002(Replaces:September 24, 1996) COVERAGE: Thermoplastic or thermosetting insulated conductors (single or multiple) intended for the internal wiring of electrical equipment. This category does not include Appliance Wiring Material or Coil Lead Wires. REQUIREMENTS: CSA Standard C22.2 No 0 - General Requirements - Canadian Electrical Code, Part II CSA Standard C22.2 No 127 - Equipment/Lead Wires MARKING: On finished products: submittor's identification; type designation; temperature rating; voltage rating; flame test marking; *Number of conductors (if more than one conductor) and conductor material (if other than copper). Each coil, reel, spool, or carton of single conductor or multiconductor cable: submittor's identification; month and year of manufacture (a code is acceptable); trade size and number of conductors (if more than one); temperature rating; maximum working voltage; type designation; conductor material (if other than copper). In addition to the above markings, the following label marking method is required. Material No Denomination 1002115 (30/-) 1002116 101 (75/250) Prepared by Tonyfeng Page:188 / Total Page:250 Issued Data: 03/06/24

1002117 102 (150/500) 1002118 103 (300/1,000) 1002119 104 (1,500/5,000) 1002120 105 (3,000/10,000) 1002121 106 (600/2,000) Size: 2-1/8 in by 1-1/4 in In lieu of this label, the CSA Label Licensing Service may be utilized CLASS NUMBER: 5851-01 DESCRIPTION: WIRES-Appliance February 7, 2002(Replaces:March 9, 1992) COVERAGE: Single conductor and multi-conductor (round, parallel and flat types) with optional coverings, jackets and shields, insulation of thermoset, thermoplastic and composite materials for use in the internal wiring of equipment and for interconnection application only. This category does not include wires which are Certified to other CSA published standards. REQUIREMENTS: CSA Standard C22.2 No 0 General Requirements - Canadian Electrical Code, Part II CSA Standard C22.2 No 210.2 Appliance Wiring Material Products (Effective February 28, 1993) The Certified Equipment appearing in this classification is judged to comply with the applicable requirements of the NFPA 70 National Electrical Code (NEC). NOTES: The construction may include twisted, laminated, fused, solvent bonded, rip, non-rip, double insulated, composite, single- or multiple-shielded constructions etc. These wires are not for use for connecting to the source of supply of electricity (branch circuits), but may be used for interconnection between pieces of equipment when permitted by a Canadian electrical code. MARKING: submittor's identification; "AWM"; Class (I or II); Group (A, B or AB); temperature rating; voltage rating; flame rating. Optional markings are also applicable for products considered "Oil Resistant" or Prepared by Tonyfeng Page:189 / Total Page:250 Issued Data: 03/06/24

"Fuel Oil-Resistant" along with wet-temperature ratings. On reels, spools, coils and packages: submittor's identification; date code; AWG size and number of conductors; type of conductor (if other than copper); thickness of insulation; class, group, temperature and voltage rating; wet or oil where applicable; where limited use of electronic equipment and appliances. In addition, equipment intended for display, sale or use in the USA, is required to include other information such as warning statements, installation instructions, etc., as may be specified in the NEC. The marking method consists of a CSA Equipment Wire and Cable Label on a tag attached to each reel, spool or coil, together with printing, embossing or equally permanent marking on the conductors and printing or permanent ink stamping or equally permanent marking on the tag. Material No. Denomination 1002115 30/- 1002116 75/250 1002117 150/500 1002118 300/1,000 1002121 600/2,000 1002119 1,500/5,000 1002120 3,000/10,000 Color: Top - White on Brown Bottom - Black on White Size: 2-1/8 in by 1-1/4 in CLASS NUMBER: 5854-01 DESCRIPTION: WIRES-Radio-circuit Wires May 13, 2002(Replaces : September 24, 1986) COVERAGE: Insulated single and multiple conductor, thermoplastic or thermoset wires and twin lead wires intended for use in power-operated electronic devices such as those covered under CSA Standard C22.2 No. 1. The voltage rating of these wires is governed by the requirements of CSA Standard Prepared by Tonyfeng Page:190 / Total Page:250 Issued Data: 03/06/24

C22.2 No. 1. REQUIREMENTS: CSA Standard C22.2 No 0 General Requirements - Canadian Electrical Code, Part II CSA Standard C22.2 No 1 Audio, Video and Similar Electronic Equipment CSA Standard C22.2 No 127 Equipment/Lead Wires MARKING: On the wire: manufacturers identification; type designation; temperature rating; number of conductors (if more than one); and flame test marking. On spools and coils: submittor's identification; type designation; conductor size; number of conductors (if more than one); month and year of manufacture; and temperature rating. In addition to the above markings, the following label marking method is required. The marking method consists of a CSA EQUIPMENT WIRE & CABLE label on a tag attached to each reel, spool or coil, together with printing, embossing or equally permanent marking on the conductors and printing or permanent ink stamping or equally permanent marking on the tag. Material No. Denomination 1002118 75/250 150/500 300/1000 1500/5000 3000/10000 In lieu of this label, the CSA Label Licensing Service may be utilized. CLASS NUMBER: 4872-02 DESCRIPTION: TELECOMMUNICATION EQUIPMENT-Cords and Cord Sets January 17, 2002(Replaces:June 3, 1999) COVERAGE: Cord sets for connecting communication systems with a normal operating voltage to ground of 150V rms or less. This category does not apply to cord sets with conductors for use in electric light, Prepared by Tonyfeng Page:191 / Total Page:250 Issued Data: 03/06/24

power and similar applications. REQUIREMENTS: CSA Standard C22.2 No 0-M General Requirements - Canadian Electrical Code, Part II CAN/CSA-C22.2 No 182.4-M Plugs, Receptacles and Connectors for Communication Systems CAN/CSA-C22.2 No 233 Cord and Cord Sets for Communication Systems The Certified equipment appearing in this classification is judged to comply with the applicable requirements of the NFPA 70 National Electrical Code (NEC). NOTE: The acceptability of the combination of a non-detachable cord set and the equipment with which it is used is determined by CSA International. MARKING: submittor's identification; model designation or equivalent; complete electrical rating; conductor type and size on supply cord set tag except on outdoor cord sets; CSA Monogram on cord reel and cord set tag. in addition, equipment intended for display, sale or use in the USA is required to include other information such as warning statements, installation instructions, etc., as may be specified in the NEC. CLASS NUMBER: 5841-01 DESCRIPTION: CORD SETS-General-use Extension Cord Sets February 4, 2002(Replaces:February 12, 1991) COVERAGE: Assemblies consisting of a suitable length of flexible cord, not smaller than No 16 AWG, provided with a general-purpose attachment plug cap at one end and a cord connector body having the same configuration as the attachment plug cap at the other end of the cord. All round, jacketed cords are of an outdoor type. The length of a cord set is 6 feet maximum for No 16 AWG cords having an average insulation thickness of 45 mils (e.g. SPT-2); 15 feet maximum for No 16 AWG and larger cords of other than a round jacketed construction (e.g. Type SPT-2, HPN, PXWT); 100 feet maximum for No 16 AWG and larger cords of round jacketed cords (outdoor-type cords only being permitted). This category does not include cord reels, cord sets having special-use fittings for connection to non-heating equipment such as electric shavers or office machines, etc., pull-off plugs for use in connection with heating equipment or where exposed to temperature in excess of 60C, nor to extension lamp cord sets. REQUIREMENTS: Prepared by Tonyfeng Page:192 / Total Page:250 Issued Data: 03/06/24

CSA Standard C22.2 No 0 General Requirements - Canadian Electrical Code, Part II CSA Standard C22.2 No 21 Cord Sets and Power Supply Cords CSA Standard C22.2 No 42 General Use Receptacles, Plugs, and Similar Wiring Devices The Certified equipment appearing in this classification is judged to comply with the applicable requirements of the NFPA 70 National Electrical Code (NEC). MARKING: submittor's identification; model designation or equivalent; complete electrical rating; In addition, equipment intended for display, sale or use in the USA is required to include other information such as warning statements, installation instructions, etc., as may be specified in the NEC. CSA Stock No: Varies for each Submittor Label Description: Cord Sets Colour: Red on Orange (may vary) Size: Submittor's choice CLASS NUMBER: 5841-03 DESCRIPTION: CORD SETS-Special-use Cord Sets February 4, 2002(Replaces:February 12, 1991) COVERAGE: Assemblies of a suitable length of flexible cord of a type and size acceptable for the particular application incorporating an attachment plug cap on one end of the cord and a special-use fitting suitable for connection to the equipment with which it is intended to be used on the other end of the cord. This category does not include cord sets having pull-off plugs for connection to electro-thermal appliances, general-purpose extension cord sets, nor to extension lamp cord sets. REQUIREMENTS: CSA Standard C22.2 No 0 General Requirements - Canadian Electrical Code, Part II CSA Standard C22.2 No 21 Cord Sets and Power Supply Cords CSA Standard C22.2 No 42 General Use Receptacles, Plugs and Similar Wiring Devices CSA Standard C22.2 No 182.1 Industrial Type, Special Use Attachment Plugs,Receptacles and Connectors. CSA Standard C22.2 No 182.2 Industrial Locking Type, Special Use Attachment Plugs, Receptacles and Connectors CSA Standard C22.2 No 182.3 Special Use Attachment Plugs, Receptacles and Connectors. Prepared by Tonyfeng Page:193 / Total Page:250 Issued Data: 03/06/24

The Certified equipment appearing in this classification is judged to comply with the applicable requirements of the NFPA 70 National Electrical Code (NEC). MARKING: submittor's identification on label, plug cap and connector body; model designation or equivalent on plug cap and connector body; complete electrical rating on each connector body and label. In addition, equipment intended for display, sale or use in the USA is required to include other information such as warning statements, installation instructions, etc., as may be specified in the NEC. CSA Stock No: Varies for each Submittor Label Description: Cord Sets Colour: Red on Orange (may vary) Size: Submittor's choice CLASS NUMBER: 5842-02 DESCRIPTION: CORD SETS-Power Supply Cords February 4, 2002(Replaces:February 12, 1991) COVERAGE: Assemblies consisting of a suitable length of flexible cord incorporating an attachment plug cap or cord connector assembled on one end of the cord and may include a through-cord switch, a strain relief method or connection terminals on the free ends. This category does not include power supply cord kits nor power supply cords (replacement type). REQUIREMENTS: CSA Standard C22.2 No 0 General Requirements - Canadian Electrical Code, Part II CSA Standard C22.2 No 21 Cord Sets and Power Supply Cords CSA Standard C22.2 No 42 General Use Receptacles, Plugs, and Similar Wiring Devices CSA Standard C22.2 No 182.1 Industrial Type, Special Use Attachment Plugs, Receptacles and Connectors CSA Standard C22.2 No 182.2 Industrial Locking Type, Special Use Attachment Plugs, Receptacles and Connectors CSA Standard C22.2 No 182.3 Special Use Attachment Plugs, Receptacles and Connectors The Certified equipment appearing in this classification is judged to comply with the applicable requirements of NFPA 70 National Electrical Code (NEC). MARKING: submittor's identification on plug caps and power supply cord tags; Prepared by Tonyfeng Page:194 / Total Page:250 Issued Data: 03/06/24

model designation or equivalent on plug caps and/or power supply cord tags; conductor type and size on power supply cord tags; CSA Monogram on power supply cord tags and moulded into detachable plug caps and cord connectors (optional on moulded-on plug caps and cord connectors). In addition, equipment intended for display, sale or use in the USA, is required to include other information such as warning statements, installation instructions, etc., as may be specified in the NEC. 3. 申請者資料 File No.: 085350-0-000, 088617-0-000 Submittor: Factories: Chau s Electrical Co., Ltd. F1: Chau s Electrical Co., Ltd.(Dong Guan) F2: Chau s Electrical Co., Ltd.(Shanghai) 4. 网動態認証資料. Logon http://directories.csa-international.org/directorymain.asp, then type in the File Number and run search function, you can gett the following information about Chau s product that approved by CSA. 1) File Number: 085350-0-000 Company: Prov/State: Country: Class Chau's Electrical Co., Ltd. Kowloon Hong Kong Class Description 5831-01 WIRES-Flexible Cord 5835-01 WIRES-Equipment 5851-01 WIRES-Appliance 5854-01 WIRES-Radio-circuit Wires 2) File Number: 088617-0-000 Company: Prov/State: Country: Class Chau's Electrical Co., Ltd. Kowloon Hong Kong Class Description 4872-02 TELECOMMUNICATION EQUIPMENT-Cords and Cord Sets 5841-01 CORD SETS-General-use Extension Cord Sets 5841-03 CORD SETS-Special-use Cord Sets 5842-02 CORD SETS-Power Supply Cords 5. 認証產品清單. Prepared by Tonyfeng Page:195 / Total Page:250 Issued Data: 03/06/24

5.1 File No. 085350-0-00 的產品 5.1.1 WIRES Flexible Cord(Class No.: 5831-01) Latest issued date: 1998.04.16, replaces 1998.02.24 C22.2 NO 49-98 Flexible Cords and Cables and certification notice wire and cable NO 18. Max temperature rating 60 1)SJTW 2)SVT 3)SJT 4)ST 5) SPT-1 6) SPT-2 7) SPT-3 8) PXT 300V; 18~2AWG; 2or more conductor; PVC insulation; PVC jacket; flame rating FT2; all colors except clear and transparent for insulation and jacket. 300V; 18, 17, 16AWG; 2~3conductor; PVC insulation; PVC jacket; flame rating FT2, all colors except clear and transparent for insulation and jacket; maybe in coiled form. 300V; 18~10AWG; 2~6conductor; PVC insulation; PVC jacket; flame rating FT2, all colors except clear and transparent for insulation and jacket; maybe in coiled form. 600V; 18~2AWG; 2 or more conductor; PVC insulation; PVC jacket; flame rating FT2, all colors except clear and transparent for insulation and jacket; maybe in coiled form. 300V; 20,18AWG; 2~3 conductor; PVC insulation; flame rating FT2; all colors except clear and transparent for insulation and jacket; maybe in coiled form; bonding conductor insulation type-pvc. 300V; 18,16AWG; 2~3 conductor; PVC insulation; flame rating FT2; all colors except clear and transparent for insulation and jacket; maybe in coiled form; bonding conductor insulation type-pvc; includes nonintegral construction, flame rating VW-1. 300V; 18~8AWG; 2~3 conductor; PVC insulation; flame rating FT2; all colors except clear and transparent for insulation and jacket; maybe in coiled form; bonding conductor insulation type-pvc. 125V; 20AWG; 2 conductor; PVC insulation; flame rating FT2; all Prepared by Tonyfeng Page:196 / Total Page:250 Issued Data: 03/06/24

9) TX colors except clear and transparent for insulation and jacket; Christmas tree cord. 125V; 20AWG; 2 conductor; PVC insulation; flame rating FT2; all colors except clear and transparent for insulation and jacket; Christmas tree cord. Max temperature rating 105 1)SJTW 2)SVT 3)SJT 4)ST 5) SPT-1 6) SPT-2 7) SPT-3 8) HPN 300V; 18~2AWG; 2or more conductor; PVC insulation; PVC jacket; flame rating FT2; all colors except clear and transparent for insulation and jacket. 300V; 18, 17, 16AWG; 2~3conductor; PVC insulation; PVC jacket; flame rating FT2, all colors except clear and transparent for insulation and jacket; maybe in coiled form. 300V; 18~10AWG; 2~6conductor; PVC insulation; PVC jacket; flame rating FT2, all colors except clear and transparent for insulation and jacket; maybe in coiled form. 600V; 18~2AWG; 2 or more conductor; PVC insulation; PVC jacket; flame rating FT2, all colors except clear and transparent for insulation and jacket; maybe in coiled form. 300V; 20,18AWG; 2~3 conductor; PVC insulation; flame rating FT2; all colors except clear and transparent for insulation and jacket; maybe in coiled form; bonding conductor insulation type-pvc. 300V; 18,16AWG; 2~3 conductor; PVC insulation; flame rating FT2; all colors except clear and transparent for insulation and jacket; maybe in coiled form; bonding conductor insulation type-pvc; includes nonintegral construction, flame rating VW-1. 300V; 18~8AWG; 2~3 conductor; PVC insulation; flame rating FT2; all colors except clear and transparent for insulation and jacket; maybe in coiled form; bonding conductor insulation type-pvc. 300V; 18,16AWG; 2 conductor; CPE insulation; flame rating FT2; all Prepared by Tonyfeng Page:197 / Total Page:250 Issued Data: 03/06/24

colors except clear and transparent for insulation and jacket; flame rating VW-1. Max temperature rating 90 1) HPN 300V; 18,16AWG; 2 conductor; CPE insulation; flame rating FT2; all colors except clear and transparent for insulation and jacket; flame rating VW-1. 5.1.2 WIRES Equipment (Class No.: 5835-01) C22.2 No.127-1999 Equipment Wires Max temperature rating 105C: TEW (60C when exposed to oil) Note: 1)In all applicable sizes and colors(solid), except for clear and transparent. 2)Approved for single conductor construction without shielding and/or overall covering 5.1.3 WIRES Appliance (Class No.: 5851-01) C22.2 No.210.2-M90 Appliance Wiring Material Products. 1) Flat parallel/multi-conductor (1) AWM Class: AWM Group: A Temperature: 80/105C Max Voltage: 150/300V Size Range: I 32~10AWG. Insulation type/average thickness: PVC/0.20mm Notes: (2) In all colors except for clear and transparent. Thicker walls may be required for some applications and permitted with the minimum at any point being 80 percent of the thicker average wall. Extruded rip and non-rip constructions. FT1 flame test rating. AWM Class: AWM Group: A/B Temperature: 80C Max Voltage: 300/600V Size Range: I 32~10AWG. Insulation type/average thickness: PVC/0.45mm Prepared by Tonyfeng Page:198 / Total Page:250 Issued Data: 03/06/24

Notes: In all colors except for clear and transparent. Special conductor construction (Table 6) product for use in electronic equipment. Thicker walls may be required for some applications and permitted with the minimum at any point being 80 percent of the thicker average wall. Extruded rip and non-rip constructions. FT1 flame test rating. 2) Single Conductor (1) AWM Class: AWM Group: A Temperature: 80C Max Voltage: 150/300V Size Range: I 30~16AWG. Insulation type/average thickness: SR-PVC/0.22mm Notes: (2) In all colors except for clear and transparent. Special conductor construction (Table 6) product for use in electronic equipment. Thicker walls may be required for some applications and permitted with the minimum at any point being 80 percent of the thicker average wall. AWM Class: AWM Group: A Temperature: 180C Max Voltage: 600V Size Range: I 32~10AWG. Insulation type/average thickness: FEP/0.45mm Notes: In all colors except for clear and transparent. Thicker walls may be required for some applications and permitted with the minimum at any point being 80 percent of the thicker average wall. FT1 flame test rating. 5.1.4 WIRES Radio circuit wires (Class No.: 5854-01) Prepared by Tonyfeng Page:199 / Total Page:250 Issued Data: 03/06/24

C22.2 N0.16-M1986 Insulated Conductors for Power Operated Electronic Devices Max temperature rating 90C, TR-64 Note: Approved for single conductor without shielding or overall covering. In all colors except for clear and transparent. 5.2 File No. 088617-0-00 的產品 5.2.1TELECOMMUNICATION EQUIPMENT Cords and Cord Sets(Class No.:4872-02) Latest issued date: 1996.04.08 1) Communication cord(ft1), 2 conductor to 8 conductor construction, straight or coiled form. 2) Communication cord sets, Series CS (Straight Line Cord) and CC (Coiled Cord) with 4, 6 and 8 position modular plugs. 3) Modular telephone jacks, Series 616, 623 and 641. 5.2.2CORD SETS-General-use Extension Cord Sets (Class No.:5841-01) Latest issued date: 1998.07.16, replaces 1998.06.24 C22.2 NO 21-95 Cord Sets and Power Supply Cords C22.2 NO 42-99 General Use Receptacles, Attachment Plugs and Similar Wiring Devices Each General use cord sets consisting of a connector body on one end and a plug cap on the other end of their common flexible cord. 1) SP-018+NEMA1-15P(Pol) Connector Body: Plug Cap: Cord Set Rating: 15A, 125V SP-018---NEMA1-15R NEMA1-15P(Polarized) Flexible 14AWG/2C:SJTW, SPT-3, STW. 13A, 125V 2) SP-034+SP-035 Flexible 16AWG/2C:SJTW, SPT-2(I&N), SPT-3, STW. Connector Body: Plug Cap: Cord Set Rating: 15A, 125V SP-034---NEMA5-15R SP-035---NEMA5-15P Flexible 10,12AWG/3C:SJTW, STW. Prepared by Tonyfeng Page:200 / Total Page:250 Issued Data: 03/06/24

15A, 125V Flexible 14AWG/3C:SJTW, SPT-3, STW. 13A, 125V Flexible 16AWG/3C:SJTW, SPT-2(I&N), SPT-3, STW. 5.2.3CORD SETS-Special-use Cord Sets (Class No.:5841-03) Latest issued date: 1998.08.05, replaces 1998.07.16 C22.2 No. 21 Cord Sets and Power Supply Cords C22.2 No.182.3-M1987 Special Use Attachment Plugs, Receptacles and Connectors. Each special use cord sets consisting of a connector body on one end and a plug cap on the other end of their common flexible cord. 1)SP-016X+NEMA1-15P Connector Body: Plug Cap: Cord Set Rating: Flexible NOTE: SP-016X---IEC320, C1 NEMA1-15P 10A, 125V 18AWG: SPT-1, SPT-2, SVT. Legend X indicates additional letters to cover minor mechanical modification within the parameters. 2)SP-016B(Pol)+NEMA1-15P(Pol) Connector Body: SP-016B---IEC320, C1* Plug Cap: Cord Set Rating: Flexible NOTE: NEMA1-15P(Pol) 10A, 125V Legend * Modified for polarization feature 3)SP-024+NEMA5-15P Connector Body: Plug Cap: Cord Set Rating: Flexible 18AWG: SPT-1, SPT-2(I&N), SVT. SP-024---IEC320, C13 NEMA5-15P 10A, 125V 18AWG: SJT, SVT. 5.2.4CORD SETS Power Supply Cords(Class No.: 5842-02) Latest issued date: 2003.03.03, replaces 2001.10.25 C22.2 NO 21-95 Cord Sets and Power Supply Cords Power Supply Cords consisting plug caps, connector bodies and strain relief bushing moulded on flexible cords. Prepared by Tonyfeng Page:201 / Total Page:250 Issued Data: 03/06/24

5.2.4.1Plug Caps 1)SP-003, -003A 2)SP-007 Configuration: NEMA5-15P Cord type: 14~18AWG/3C Configuration: NEMA5-15P Cord type: 3)SP-020, -020P 14~18AWG/3C: Configuration: NEMA1-15P Cord type: 18AWG/2C: 16AWG/2C: 4)SP-021, -021P SJT, SPT-3, SVT SJT, SJTW, SPT-2,-3, SVT HPN, SPT-1,-2(I&N) SPT-1,-2(I&N) Configuration: NEMA1-15P Cord type: 5)SP-021F, -021PF 16, 18AWG/2C: SJT, SJTW, SVT Configuration: NEMA1-15P Cord type: 18AWG/2C: 6)SP-021A, -021AP 7)SP-022 SVT Configuration: NEMA1-15P Cord type: 18AWG/2C: SJT, SJTW, SVT, HPN 16AWG/2C : SJT, SJTW, SVT Configuration: NEMA5-15P Cord type: 8)SP-022A 9)SP-033 18, 16, 14AWG/3C: SJT, SVT Configuration: NEMA5-15P Cord type: 18, 16, 14AWG/3C: SPT-3, SJT, SVT Configuration: NEMA1-15P Cord type: Prepared by Tonyfeng Page:202 / Total Page:250 Issued Data: 03/06/24

10)SP-033P 18AWG/2C: SPT-1, SPT-2(I&N) 20AWG/2C : TX, CXWT Configuration: NEMA1-15P Cord type: 11)SP-035 18AWG/2C: SPT-1, SPT-2(I&N) 20AWG/2C : SPT-2(I&N) Configuration: NEMA5-15P Cord type: 12)SP-037 18AWG/3C: 16AWG/3C: 14AWG/3C: Configuration: NEMA5-15P Cord type: 13)SP-038 SPT-2(I&N), SJT, SJTW, SVT SPT-2(I&N), SJT, SJTW SJT, SJTW 14, 12AWG/3C: ST, SJT Configuration: NEMA6-15P Cord type: 14)SP-039 14, 12AWG/3C: ST, SJT Configuration: NEMA5-20P Cord type: 15)SP-040 14, 12AWG/3C: ST, SJT Configuration: NEMA6-20P Cord type: 16)SP-120, -120P 14, 12AWG/3C: ST, SJT Configuration: NEMA1-15P Cord type: 17)SP-017X 16AWG/2C: SPT-2(I&N) 18AWG/2C : SPT-1, SPT-2(I&N), SVT Configuration: Special use Cord type: 18AWG/2C : SPT-1, SPT-2, SVT Prepared by Tonyfeng Page:203 / Total Page:250 Issued Data: 03/06/24

18)CS-018 Configuration: Special use Cord type: 5.2.4.2Connector Bodies 18AWG/2C : SPT-1, SPT-2, SVT 1)SP-013, -013B, -013R Configuration: S-use Fem Rating: Cord type: 18AWG/2C 10A, 125V 2)SP-016, -016B, -016C, -016X SPT-1, SPT-2(I&N) Configuration: IEC320, C1, modified for porlarization feature. Rating: 3)SP-018 4)SP-024 Cord type: 18AWG/2C 10A, 125V Configuration: NEMA1-15R Cord type: 14AWG/2C: SPT-1, SPT-2(I&N), SVT SJT, SJTW, SPT-3, ST, STW. 18, 16AWG/2C: SJT, SJTW, SPT-2(I&N), SPT-3, ST, STW, SVT Configuration: IEC320, C13 Rating: 5)SP-034 6)469 7)472 Cord type: 18AWG/3C: 10A, 125V SJT, SVT Configuration: NEMA5-15R Cord type: 12, 10AWG/3C: SJT, SJTW, ST, STW. 14AWG/3C: SJT, SJTW, SPT-3, ST, STW 18, 16AWG/3C:SJT, SJTW, SPT-2(I&N), SPT-3, ST, STW, SVT Configuration: Special use Cord type: 18AWG/2C: SVT Configuration: Special use Cord type: Prepared by Tonyfeng Page:204 / Total Page:250 Issued Data: 03/06/24

20, 18AWG/2C: SVT 5.2.4.3Strain Relief Bushing 1)286 Cord type: 18AWG/2C: SPT-1, SPT-2 May or may not be part of the Submittor s applicable Certified power supply cords. Legend: (I&N)---denotes Integral and Non-integral. Note: These are certified only for supply to manufactures for the assembly, as components of equipment where the suitability of the combination is determined in the end use. 6. 服務協義 (SERVICE AGREEMENT) Service Agreement No.: LR88617 這是周氏與 CSA 簽定的第㆒份 Service Agreement, 簽定日期為 1989.07.10. Type of Certification: Re-examination Service Certification of CORD SETS-Power supply cords, Class:5842-02 Service Agreement No.: LL89263 簽定日期為 1990.02.28 Type of Certification: Label Service Certification of CORD SETS-Special use cord sets, Class:5841-03 此 File 于 1996.04.08 合併到 LL88617. 服務類別 : LL---Listed as a Label service. LL85350: LL88617: Class: 5831-01, 5835-01, 5851-01, 5854-01. Class: 5841-01, 5841-03 LR Listed as a Re-examination service LR88617: Class: 4872-02, 5842-02 Prepared by Tonyfeng Page:205 / Total Page:250 Issued Data: 03/06/24

Item X. CE 認証 1. CE 標志 CE 標志 (CE Mark) 屬於強制性標志, 是歐盟 (European Union 即 EU) 所推行的㆒种產品標志. 它是㆒种适用于歐盟有關技術協調与標準的新方法指令 (New Approach Directives), 用以証明產品符合指令規定的基本要求 (Essential Requirments) 的合格標志. 告知消費者哪些產品符合安全, 健康, 環境方面的基本要求, 因此又被称 CE 合格標志 (CE Conformity Marking) CE 是 " 歐共体 " 的拉文縮写, 此外 CE 還有符合歐洲 ( 要求 )(Conformity with European (Demand)) 之意, 因此 CE 被選用來作歐盟的產品標志. 不管是歐盟內部企業生產的產品還是第㆔國家生產的產品, 要在歐盟市場自由流通, 必需加貼 CE 標志. CE 標志被認為是制造商打入歐洲市場的護照, 凡是貼有 CE 標誌志的產品就可在歐盟各成員國內銷售, 無須再符合各成員國的要求, 從而實現了商品的自由流通. 加貼 CE 標誌的產品范圍指可能損害体安全健康及財產的產品均是 CE 標識的對象. 對于大多數電工電子產品來講, 申請 CE 認証必需符合低電壓設備 (LVD) 指令和電磁兼容性 (EMC) 指令的要求電磁兼容性 (EMC) 需符合 89/336/EEC, 92/31/EEC, 93/68/EEC, 並于 92.01.01 實行 ; 低電壓設備 (LVD) 需符合 73/23/EEC, 93/68/EEC, 並于 95.01.01 實行. CE 標志与產品責任 : 實際, CE 標志僅是制造商的㆒种聲明, 是向當局的市場檢查員和產品的貿易商而不是向消費者的聲明. 該標志表明制造商評估了產品符合相關要求, 從而能使產品在整個歐盟內自由流通, 并不說明產品的質量或對周圍環境安全与否. 為使制造商避免風險責任, 最有效的是通過第㆔ 方認証机构進行檢驗, 并出具測試報告. 雖然 CE 標志可采取自我宣告的方式, 由制造者自己加貼, 但為取得用户, 監督檢查部門的信任, 減少競爭對手的猜疑和投訴, ㆒般還應有㆒份第 ㆔方認証机构的檢測告, 這樣才有利于產品外銷歐洲市場, 減少市風險. (Refer to http://www.gtihea.com/yewu011.htm) Prepared by Tonyfeng Page:206 / Total Page:250 Issued Data: 03/06/24

Chapter 2 電線設計篇 2.1 術語 2.1.1 RG58/U 表示甚麼? RG/U is used to designate coaxial cables that are made to a Government specification. In the case of RG58/U, the "R" means RADIO FREQUENCY, the "G" means GOVERNMENT, the 58 is the number assigned to Government approval, and the "U" means it's a UNIVERSAL specification. (Refer to http://connectors.tycoelectronics.com/glossary) RG58/U 特性阻抗為 50Ω, 用于細纜以太网. RG8, RG11 特性阻抗為 50Ω, 用于粗纜以太网. RG59 特性阻抗為 75Ω, 用于有線電視网. RG62 特性阻抗為 93Ω, 用于 ARC 网. 述同軸電纜是網絡的傳輸介質, 通常我們所講到的 10BASE-2, 10BASE-5, 10BASE-T 都是指基帶傳輸模式, 傳輸速率為 10Mbits/s. ( 注 : 基帶傳輸輸指電纜只傳送㆒個信號, 即只有㆒個傳輸通道, 而寬帶傳輸則表示在電纜可以用不同的頻率傳送多個信號.) 2.1.2 RMS 表示甚麼? Root Mean Square (measurement), The effective value of an alternating current, corresponding to the direct current value that will produce the same heating effect. (Refer to http://connectors.tycoelectronics.com/glossary) 2.1.3 H05VV-F 型號是甚麼意思? 此型號的線材是按照 VDE 標準設計和制造. VDE 線材編碼意義如 : VDE 協調線材編碼 1 2 3 4 5 6 7 8 9 10 11 12 13 H 0 5 V V F 3 G 0 7 5 1 位表示型號 : H 協調系統 (Harmonized) A 其它標準 ( 未包括在協助系統的國家標準 ) 2 位和 3 位表示電壓級 : 03 300/300V 05 300/500V 07 450/750V 4 位表示絕緣類別 : V PVC Prepared by Tonyfeng Page:207 / Total Page:250 Issued Data: 03/06/24

R 然或造橡膠 N 氯橡膠 (Polychloroprene Rubber) S 硅橡膠 (Silicone Rubber) L 玻璃纖維結構 (Glass Fiber Construction) 5 位表示護套類別 : V PVC R 然或造橡膠 N 氯橡膠 (Polychloroprene Rubber) T 編織結構 (Textile Construction) 6 位特別用途很少使用 (D3) 7 位表示結構 : H 扁型, 分隔電線 (Flat, separate cable) H2 扁型, 不分隔電線 (Flat, non-separate cable) 8 位表示導體結構 U 單根導體 (solid) R 絞合導體 (strand) K 固定裝置用軟線使用的導體 F 軟線使用的導體 H 特軟線使用的導體 Y 銅箔絲 (Tinsel) 9 位表示導體數目. 10 位表示是否有線 G 表示有線 X 表示沒有線 11/12/13 位表示導體截面積 : 075 表示 0.75MMSQ. 2.1.4 RGB 線材是甚麼意思? RGB Red, Green, Blue. 電腦顯器的顏色是由 RGB ㆔元色組成的, 這㆔种顏色的模擬信號是由㆔條小同軸線從主機傳到顯示器, 再經過調制產生不同的顏色. RGB 線就是實現這㆒功能的傳輸介質, 通常包括 3 條小同軸線, ㆒般用有 UL 安全認証的 UL1354 線材, 另外還包括至少 4 根信號線. 也就是我們通常說的 3+4, 3+5 等結構. 最終整條線采用 UL2919,UL20276 或 UL20379 作安全認證. 2.1.5 Serial ATA Cable 是甚麼意思? 符合 Serial ATA 1.0 標準的電纜, 用于 PC 存儲設備, 長度小于 1M. 特性阻抗為 100+/-5Ω, 通常有兩對信號線 (26AWG~30AWG) 及 4 條線組成的扁型電纜, 絕緣通常為 Skin- Foam- Skin 結構. 當使用長度小于 0.3M Prepared by Tonyfeng Page:208 / Total Page:250 Issued Data: 03/06/24

時采用 30AWG, 使用長度在 0.3~0.6M 之間時采用 28AWG, 使用長度在 0.6~0.9M 之間時采用 26AWG. 此線對電性能要求特別嚴格, 需要极高的設備精度和良好的材料才能生產. (Refer to www.serialata.org and LiTek 技術簡報 ) 2.2 H05RR-F 與 H05RN-F 的區別 H05RR-F 與 H05RN-F 都是以橡膠 (Rubber natural or synthetic 然或造 ) 為絕緣的, 而 H05RR-F 是以橡膠 (Rubber 然或造 ) 為外護套的, H05RN-F 是以氯橡膠 CR(Polychloroprene Rubber) 為外護套. 在性能 H05RR-F 與 H05RN-F 都比較相似. 在周氏這兩种線都用合成 ( 造 ) 橡膠即 EPDM( ㆔元膠 ) 作為絕緣, 用 CPE( 氯化聚烯 ) 作護套. 因 CPE 的性能與 CR 相似, CR 的加工性能差, 在混煉過程溫度稍高就會出現燋燒現象, 同樣在擠出過程也會出現此現象. 而 CPE 的加工性能就比較好, 故用 CPE 取代 CR. 2.3 JIS Cable Classification(Refer to JIS C3306 1987 ) CODE: VSF PVC insulated single-core cord HVSF Heat-resistant PVC insulated single-core cord VTF PVC insulated Twin-twisted cord. VFF PVC insulated flat cord HVFF Heat resistant PVC insulated flat cord. VCTF PVC insulated cabtyre round cord HVCTF Heat-resistant PVC insulated cabtyre round cord. VCTFK PVC insulated cabtyre oval cord HVCTFK Heat-resistant PVC insulated cabtyre oval cord. HHFF Heat-resistant rubber flat cord. Symbols designate the following: V polyvinyl chloride SF Single core Flexible cord ( 單芯軟線 ) TF Twin-twisted Flexible cord ( 雙芯絞合軟線 ) FF Flat Flexible cord ( 扁型軟線 ) CTF Cabtyre cord ( 圓型線 ) K Oval ( 橢圓形線 ) H Heat-resistant insulation ( 耐熱絕緣 ) 2.4 UL Flexible cord Classification(Refer to Chau s catalogue) TPT Tinsel parallel Thermoplastic TS Tinsel Service Prepared by Tonyfeng Page:209 / Total Page:250 Issued Data: 03/06/24

SPT-1 Service Parallel Thermoplastic 1/64 insulation SPT-2 Service Parallel Thermoplastic 2/64 insulation SPT-3 Service Parallel Thermoplastic 3/64 insulation SPE-1-- Service Parallel Elastomer 1/64 insulation SPE-2-- Service Parallel Elastomer 2/64 insulation SPE-3-- Service Parallel Elastomer 3/64 insulation SV-- Service Vacuum SVO Service Vacuum Oil Resistant Jacket SVOO SVO with Oil Resistant Insulation SVE Service Vacuum Elastomer SEVO SVE with Oil Resistant Jacket SEVOO SVEO with Oil Resistant Insulation SJ Service Junior SJO SJ with Oil Resistant Jacket SJOO SJO with Oil Resistant Insulation SJT Service Junior Thermoplastic SJTW SJT with Outdoor Jacket SJTO SJT with Oil Resistant Jacket SJTOO SJTO with Oil Resistant Insulation SJE Service Junior Elastomer SJEO SJE with Oil Resistant Jacket SJEOO SJEO with Oil Resistant Insulation SJEOW SJEO with Outdoor Jacket S Service SO Service with Oil Resistant Jacket SOO SO with Oil Resistant Insulation ST Service Thermoplastic STW ST with Outdoor Jacket STO ST with Oil Resistant Jacket SE Service Elastomer SEO SE with Oil Resistant Jacket SEOO SEO with Oil Resistant Insulation HPN Heater Parallel Neoprene HSJ Heater Service Junior HSJO HSJ with Oil resistant Jacket HS Heater Service HSO Heater with Oil resistant Jacket 2.5 CCC Cable Classification(Refer GB5023-1997 and GB5013-1997) Prepared by Tonyfeng Page:210 / Total Page:250 Issued Data: 03/06/24

2.5.1 PVC Cable: 1) 227 IEC 01(BV): ㆒般用途單芯硬導體無護套電纜, 450/750V, 導體符合 GB/T3956 的第 1 和第 2 种, 電纜導體範圍 1.5MMSQ~400MMSQ, 允許的導體最高溫度 70C. 2) 227 IEC 02(RV): ㆒般用途單芯軟導體無護套電纜, 450/750V, 導體符合 GB/T3956 的第 5 种, 電纜導體範圍 1.5MMSQ~240MMSQ, 允許的導體最高溫度 70C. 3) 227 IEC05(BV): 內部布線用導體溫度為 70C 的單芯實心導體無護套電纜, 300/500V, 導體符合 GB/T3956 的第 1 种, 電纜導體範圍 0.5MMSQ~1.0MMSQ, 允許的導體最高溫度 70 度. 4) 227 IEC 06(RV): 內部布線用導體溫度為 70C 的單芯軟導體無護套電纜, 300/500V, 導體符合 GB/T3956 的第 5 种, 電纜導體範圍 0.5MMSQ~ 1.0MMSQ, 允許的導體最高溫度 70 度. 5) 227 IEC 07(BV-90): 內部布線用導體溫度為 90C 的單芯實心導體無護套電纜, 300/500V, 導體符合 GB/T3956 的第 1 种, 電纜導體範圍 0.5MMSQ~2.5MMSQ, 允許的導體最高溫度 90 度, 短期內工作溫度可達 105C. 6) 227 IEC 08(RV-90): 內部布線用導體溫度為 90C 的單芯軟導體無護套電纜, 300/500V, 導體符合 GB/T3956 的第 5 种, 電纜導體範圍 0.5MMSQ~2.5MMSQ, 允許的導體最高溫度 90 度, 短期內工作溫度可達 105C. 7) 227 IEC 10(BVV): 輕型 PVC 護套電纜, 300/500V, 導體符合 GB/T3956 的第 1 和第 2 种, 芯數 2~5 芯, 電纜導體範圍 1.5MMSQ~35MMSQ, 允許的導體最高溫度 70C 8) 227 IEC 41(RTPVR): 扁型銅皮軟線, 300/300V, 導體電阻 <=270OHM/KM, 芯數 2 芯, 允許的導體最高溫度 70C 9) 227 IEC 42(RVB): 扁型無護套軟線, 300/300V, 導體符合 GB/T3956 的第 6 种, 芯數 2 芯, 允許的導體最高溫度 70C 10) 227 IEC 43(SVR): 戶內裝飾照明回路用軟線, 300/300V, 導體符合 GB/T3956 的第 6 种, 芯數 1 芯, 導體範圍 0.5~0.75MMSQ, 允許的導體最高溫度 70C. 11) 227 IEC 52(RVV): 輕型 PVC 護套軟線, 300/300V, 導體符合 GB/T3956 的第 5 种, 芯數 2~3 芯, Prepared by Tonyfeng Page:211 / Total Page:250 Issued Data: 03/06/24

導體範圍 0.5~0.75MMSQ, 允許的導體最高溫度 70C 12) 227 IEC 53(RVV): 普通 PVC 護套軟線, 300/500V, 導體符合 GB/T3956 的第 5 种, 芯數 2~5 芯, 導體範圍 0.75~2.5MMSQ, 允許的導體最高溫度 70C 13) 227 IEC 71f(TVVB): 扁型銅皮軟線, 導體 <=1MMSQ, 電壓等級 300/500V, 其它 450/750, 導體範圍 0.75~16MMSQ, 芯數 3~24 芯, 允許的導體最高溫度 70C. 2.5.2 Rubber Cable: 1) 245 IEC 03(YG): 移動電器設備用耐熱硅橡膠絕緣纜, 300/500V, 導體符合 GB/T3956 的第 5 种, 電纜導體範圍 0.5MMSQ~16MMSQ, 允許的導體最高溫度 180C, 外包㆒層玻璃纖維編織層. 2) 245 IEC 51(RX): 編織軟線, 應用于家用電器, 300/300V, 導體符合 GB/T3956 的第 5 种, 芯數 2~3 芯, 電纜導體範圍 0.75MMSQ~1.5MMSQ, 允許的導體最高溫度 60C, 外包紡纖編織層 3) 245 IEC 53(YZ): 普通強度橡套軟線, 300/500V, 導體符合 GB/T3956 的第 5 种, 芯數 2~5 芯, 電纜導體範圍 0.75MMSQ~2.5MMSQ, 允許的導體最高溫度 60C 4) 245 IEC 57(YZW): 普通氯橡套軟線, 300/500V, 導體符合 GB/T3956 的第 5 种, 芯數 2~5 芯, 電纜導體範圍 0.75MMSQ~2.5MMSQ, 允許的導體最高溫度 60C 5) 245IEC 66(YCW): 重型氯橡套軟線, 450/750V, 導體符合 GB/T3956 的第 5 种, 芯數 2~5 芯, 電纜導體範圍 1.0MMSQ~25MMSQ, 允許的導體最高溫度 60C 6) 245 IEC 58(YSF) 裝飾回路用氯橡套電纜, 圓型. 245 IEC 58f(YSFB) 扁型. 300/500V, 導體符合 GB/T3956 的第 5 种, 芯數 1~2 芯, 電纜導體範圍 0.75MMSQ~1.5MMSQ, 允許的導體最高溫度 60C, 適用於室內和室外裝飾回路. 7) 245 IEC 70(YTB) 編織電梯電纜, 245 IEC 74(YT) 高強度橡套電梯電纜 245 IEC 75(YTF) 氯橡套電梯電纜 300/500V, 導體範圍 0.75~1.0MMSQ, 芯數 6~30 芯, 允許的導體最高溫度 60C 8) 245 IEC 81(YH) 橡套電焊機電纜 245 IEC 82(YHF) 氯橡套電焊機電纜專用於電焊機, 電壓等級不限制, 導體範圍 16~95MMSQ, 芯數 1 芯. 2.6 絞合導體, 編織及斜包相關計算方法 (Refer to 住友 handbook and 電纜工藝 ). Prepared by Tonyfeng Page:212 / Total Page:250 Issued Data: 03/06/24

2.6.1 絞合導體的類型同心絞束絞同心復絞 2.6.2 同心絞的計算公式單線以絞線心線為軸線, 分層有序絞合在其周圍, 相鄰絞層方向相反, 心層可以由單根或幾根單線構成將多根單線以同方向, 同節距不分層的扭絞在㆒起以股線代替單線同心絞, 股線可以是絞線, 也可以是束線 1) 絞線某㆒層的單線根數 (n ), n 為層數 ( 心層除外 ) 心層為單根時 :n =6n 心層為 m 根時 :n =6n+m 2) 絞線單線的總根數 (N) 心層為單根時 :N=3n(1+n)+1 心層為 m 根時 :N=3n(1+n)+m(1+n) m>1 3) 絞線外徑 ( 單線直徑為 d) 心層為單根時 :D=(1+2n)d 心層為 3 根時 :D=(2.155+ 2n)d 心層為 4 根時 :D=(2.414+ 2n)d 心層為 5 根時 :D=(2.701+ 2n)d 4) 絞線重量 (W),k 1 為絞合系數 ( 絞入率 ),w 為單線重量 W=(1+k 1 )N w 5) 絞線電阻 (R),k 2 為絞合電阻系數,r 為單線電阻系數 R= r*(1+k 2 )/N 6) 絞線的抗張強度大約是單線抗張強度總和的 90% 2.6.3 束絞 1) 外徑 D=SQRT((4N-1)/3)*d=d 1.154 SQRT(N), SQRT(N) N 的平方根 2) 重量, 電阻, 抗張強度與同心絞㆒樣 2.6.4 同心絞的絞合角與絞入率 d-- 單線直徑,D-- 絞合外徑,D`-- 節圓直徑,P-- 節距,x-- 單線展開長度, θ-- 絞合角,k-- 絞合系數, 他們有如的關系 : x=p*(k+1) P/D`=π/tanθ k+1=1/cosθ θ=0~90 0 θ π Prepared by Tonyfeng Page:213 / Total Page:250 Issued Data: 03/06/24

2.6.5 編織屏蔽 1) 編織密度 (γ) γ=(2f-f 2 ) 100% F=NCd/2Psinα Sinα=π(D+2d)/SQRT(π 2 (D+2d) 2 +P 2 ) 其 N-- 每錠的單線根數 C-- 錠子總數 ( ㆒般為 16, 24) d-- 單根直徑 Q-- 目數 2) 節距與目數 ( 花數 ) 的計算. α-- 編織角 P-- 編織節距 D-- 編織前外徑 P=25.4C/2 Q=12.7C/P---- 表示長度為 1inch 的交叉點個數. 2.6.6 纏繞屏蔽 1) 纏繞密度 (K) K=(ND/P sinα) 100% N-- 纏繞根數 D-- 節圓直徑 α-- 纏繞角 sinα=πd/sqrt((πd) 2 +P 2 ) d-- 單線直徑 p-- 纏繞節距 2.7 直流電阻計算方法 (Refer to 住友 handbook and 電線電纜手冊 1) 導體的電阻率有体積電阻率和質量電阻率 ( 少用 ) 兩种形式. 基本公式 : R=pL/S p 20 體積電阻率 (17.241nΩ*m), S-- 截面積 (mm 2 ), L-- 長度 (m) 在 20 時, 截面積為 1mm 2, 長為 1m 的銅導體電阻為 R=0.017241Ω (1) 退火單支銅直流電阻 R=4 10 3 /(58πδd 2 ) (Ω/km) δ-- 電導率 (%), 與電阻率成反比, 以國際退火銅的電阻率 17.241 nω*m 作為 100%IACS(International Annealed Copper Standard) d= 單支銅直徑 (mm) (2) 絞線的直流電阻 (a) 裸銅線 R=(1+S)*4 10 3 /(58πnδd 2 ) (Ω/km) S 絞入率, 小於 60 根單線時為 2%, 大於 60 根單線時為 3% n= 導體根數 (b) 導體為兩種物質組成 R=1/(n 1 /R 1 δ 1 +n 2 /R 2 δ 2 )(1+S) (Ω/km) 導電率直徑 (mm) 退火銅線鍍錫銅硬質銅 Prepared by Tonyfeng Page:214 / Total Page:250 Issued Data: 03/06/24

0.1~0.26 0.98 0.93-0.26~0.50 0.993 0.94 0.96 (3) 銅線的溫度系數 0.50~2.0 1.00 0.96 0.96 2.0~8.0 1.00 0.97 0.97 溫度為 t 與 t 0 時的電阻 Rt 與 Rt 0 的關系 Rt=Rt 0 (1+αt 0 (t-t 0 )) α 為溫度系數有 :αt 0 =1/1/(0.00393 δ/100)+(t 0-20) 2.8 載流量計算 (Refer to 住友 handbook) 載流量 I 有如公式 I=K 1 *SQRT((T 1 -T 0 )/Rr) 其 :I= 允許載流量 (A) r= 導體在 T 時的有效電阻 (Ω/km) R= 熱阻 ( cm/w) T 1 = 最大允許溫度 ( ) T 0 = 環境溫度 ( ) K 1 = 多芯允許載流量的系數熱阻的計算公式 R=R 1 +R 2 R 1 =P 1 /2π lnd 2 /d 1 ( cm/w) R 2 =10P 2 /πd 2 ( cm/w) 其 R 1 : 絕緣物質與遮蔽物的熱阻 ( cm/w) R 2 : 線表面熱阻 ( cm/w) d 1 : 導體外徑 (mm) P 1 物質 P 1 ( cm/w) PVC 600 PE 450 Irrax A 450 TFE 450 FEP 400 Nylon 400 P 2 物質 P 2 ( cm/w) 表 P 1 500+10d 2 (d 2 20) 加編織 400+20d 2 (d 2 20) 最大允許溫度物質 T 1 ( ) 普通 PVC 60 PE 75 Irrax A 100 P 1 : 絕緣固有熱阻 P 2 : 表面傳導的固有熱阻 d 2 : 線的外徑 Prepared by Tonyfeng Page:215 / Total Page:250 Issued Data: 03/06/24

Irrax B 8 B 12 125 Irrax B 10 150 Irrax V 2 105 FEP 200 TFE 250 耐熱 PVC 80,105 允許載流量縮減系數 K 1 心間隔芯數排列方式 2.9 成纜時填充量計算. 當絕緣線芯成纜時, 其線芯與線芯之間均有㆒些空隙, 特別是雙芯, ㆔芯, ㆕芯與五芯成纜時, 其內部和側面均有較大的空隙, 如不用填充材料加以填充, 很難保証成纜後纜芯的圓整度, 故我們須對多芯線纜進行填充以保証其圓整度, 並增加線纜的抗沖擊, 抗擠壓強度填充用材料㆒般有紙捻繩, 電纜麻, 棉紗, 塑料繩, 橡皮等圓形線芯對稱成纜的填充面積可由以公式得出 : 2 芯兩側部分 :2 0.785d 2 3 芯心部分 :0.04d 2, 側面部分 :3 0.417d 2 4 芯心部分 :0.215d 2, 側面部分 :4 0.315d 2 5 芯心部分 :0.542d 2, 側面部分 :5 0.2517d 2 6 芯心部分 :1.0267d 2, 側面部分 :6 0.221d 2 式 d 為線芯外徑 ( 注 : 對于不規則結構用 AUTOCAD 計算填充面積 ) 2.10 規則絞合外徑計算方法. 2 芯絞合 D=2d 3 芯絞合 D=2.154d 4 芯絞合 D=2.414d 5 芯絞合 D=2.7d 6 芯絞合 D=3d 7 芯絞合 D=3d 多芯束絞, 可用 D=SQRT((4*N-1)/3)*d 計算. Prepared by Tonyfeng Page:216 / Total Page:250 Issued Data: 03/06/24

絞合徑 D, 單線直徑為 d, 單線根數 N ( 注 : 對于不規則絞合, 其外徑需用 AUTOCAD 進行計算 ) 2.11 RV-90 和 RV-105 是甚麼意思? GB5023.1~3-85 和 GB5023.4~5-86 標準規定了 RV-105 等型號, 表示此電纜長期允許工作溫度為 105. 但新版標準 GB5023.1~7-1997 取消了 RV-105 等型號, 故新版標準只有 RV-90, BV-90 等型號, 表示正常工作時, 導體最高允許溫度為 90, 當電纜的使用環境可防止熱塑流動和容許減小絕緣電阻的情況, 能連續在 90 使用的 PVC 混合物, 在縮短總工作時間的前提, 其工作溫度可提高至 105. 2.12 軟電纜是否可采用鋁導體? GB5023.1~3-85 和 GB5023.4~5-86 標準規定可以采用鋁導體, 這是由于歷史原因造成, 因為國內有㆒段時間推以鋁代銅, 但發達國家從可靠角度考慮, 軟電纜類產品基本不采用鋁芯, 故新版標準 GB5023.1~ 7-1997 取消了此規定. 2.13 為何新版 GB5013 和 GB5023 對成纜絞距未作規定? GB5013.1~7-1997 只規定了編織軟線的成纜絞距要求, 對其它型號並未進行規定, 而舊版 GB5013 對 YCW, YZW 等產品都有成纜交距規定. GB5023.1~7-1997 未規定成纜絞距, 而舊 GB5023 對產品的成纜絞距有規定. 原因 : 舊版標準受生產型標準的影響很大, 標準規定了不少工藝和管理方面的要求, 而且過細過死, 比如規定具體的導體結構, 規定几乎所有多芯產品的絞合方向和絞合節距, 甚至規定某㆒產品纜芯包帶的搭蓋呎寸, 規定成品電纜的交貨長度及短段長度和計量誤差. 這种狀況是在長期以來的計劃經濟條件形成的. 在市場經濟條件, 這种生產型標準即規範不了市場秩序, 也不利於企業間的競爭和技術創新. 新版標準融入了貿易型標準的概念, 對沒有必要的規定進行了刪減. 這是㆒种觀念的轉變, 標準的制訂從指導生產逐轉變成為貿易服務, 在采用國際標準方面開始從參照, 等效方式逐步轉變為等同方式. 諸如 GB/T3956-1997 標準對于導體的規定也是述原因, 新版規定了導體的种類和導體單線最大直徑, 而舊版標準規定了具體的導體結構. 2.14 SRDT 線的額定電流及額定電壓 (Refer to UL817). SRDT 線是依據 UL62 標準的電源線, 用於電灶和干燥器. UL817 規定, 電灶和干燥器用的電源線應是不可拆線的, 其額定電流和額定電壓規定如 : Prepared by Tonyfeng Page:217 / Total Page:250 Issued Data: 03/06/24

10AWG/2( 未標注的電路 )+10AWG/1C( 接電路 ): 額定電流 30A( 接電路芯線通過的電流為非平衡電流 ) 額定電壓 300V 所配插頭 3 极 3 線, 型號 NEMA 10-30P 額定電壓 125/250V ( 周氏型號 SP-062) 10AWG/2( 未標注的電路 )+10AWG/1C( 接電路 )+ 10AWG/1C( 接線 ) : 額定電流 30A( 接電路芯線通過的電流為非平衡電流 ) 額定電壓 300V 所配插頭 3 极 4 線, 型號 NEMA 14-30P 額定電壓 125/250V ( 周氏型號 SP-060, 061) 6AWG/2( 未標注的電路 )+8AWG/1C( 接電路 )+ 8AWG/1C( 接線 ) : 額定電流 55A( 接電路芯線通過的電流為非平衡電流 ) 額定電壓 300V 所配插頭 3 极 4 線, 型號 NEMA 14-50P 額定電壓 125/250V ( 周氏型號 SP-065, 066) 2.15 通用軟線組的額定電流, 額定電壓及額定功率 (Refer to UL817). 額定電壓值由線路連接件結構的額定電壓值決定, 並且不應超過軟線額定值較小的㆒個值. 額定電流取決於插頭, 軟線電流額定值較小的㆒個值. 額定功率取決於軟線的載流量與負載連接件的額定電壓的乘積. 每㆒通用軟線組應標出其電氣額定值, 可用旗形標簽纏繞在軟線周圍, 標簽未端粘在 ㆒起, 如旗子那樣伸出. 2.16 SPT-2 用導體規定. Question: Answer: In UL62 Table 11.1 and clause 74.3 said: SP-2, SPT-2, NISP-2, SPE-2, NISPT-2, AWG size of individual strands the minimum is 36AWG, the maximum is 34AWG. In UL817 page 28 clause 23.3 said: Each general-use cord set employing Type SP-2, SP-3, SPT-2, SPT-3, SPE-2, SPE-3 flexible cord, employing No.30AWG stranded conductors, shall be permanently and legibly marked according to 23.6 "FOR USE ONLY WHERE NOT SUBJECT TO FREQUENT FLEXING," or the equivalent. Why I can't use 32AWG for SP-2, SPT-2, NISP-2, SPE-2, NISPT-2 and whether I must in addition to the marking "FOR USE ONLY WHERE NOT SUBJECT TO FREQUENT FLEXING"? No one ever requested the 32 AWG option since the 30 AWG strand is less costly but the 32 AWG strand would certainly be OK. You may Prepared by Tonyfeng Page:218 / Total Page:250 Issued Data: 03/06/24

use that and show the UL factory representative this message so that he will be satisfied. Since the 32 AWG strand does not comply with the basic requirement of 36-34, you will still need to add the marking concerning extensions cords only. I have talked with CSA and their Standard also doesn't permit the 32 AWG strand. We are working on a Tri-national Standard and we have agreed to add that option based on your request. (From Austin D. Wetherell, Senior Staff Engineer, Conformity Assessment Services, Underwriters Laboratories Inc., Melville, New York Office. E-MAIL: Austin.Wetherell@us.ul.com) 2.17 對 UL62 Circuit Conductor 的理解. 動力線, 除線之外的所有其它線芯. 2.18 對 UL62 Grounded Conductor, Grounding Conductor 的理解. Grounded Conductor (Grounded Circuit Conductor)--- 靈線 Grounding Conductor--- 線 2.19 澳洲電源線 V-75, V-90 是何意思? 標準 AS/NZS3191:1996 2.2.1.2 Type of thermoplastic PVC insulation 規定 : V-75 A combination of material, of which the base constituent is polyvinyl chloride. It is suitable for up to 75 maximun continuous operating temperature. V-90 Higher temperature versions of V-75, suitable for up tp 90 maximum continuous operating temperature. 2.20 澳洲電源線對 Core 和 Flexible cord 定議. AS/NZS 3191: 1996 標準 1.3 Definitions 定議 : Core--- The conductor with its insulation but not including any protective covering. Flexible cord--- A flexible cable, of which no wire exceeds 0.31mm diameter and no conductor exceeds a 4mmsq cross-sectional area, nad having no more than five cores. 2.21 電源線電壓等級 U 0 /U 的定議. AS/NZS 3191: 1996 標準 1.3.10 Voltage desingnation 定議 : U 0 ---the r.m.s power frequency voltage to earth of the supply system or the d.c. voltage of the supply system for which the flexible cord is designed. U--- the r.m.s power frequency voltage between phases of the supply system for which the flexible cord is designed. 2.22 歐洲各國電源線認証標誌. 采用各國相對應的標誌印在電源線表面. 依據 : Prepared by Tonyfeng Page:219 / Total Page:250 Issued Data: 03/06/24

1. VDE refer Marks Licence No.: 113934 2. NEMKO refer Certificate No.: P1100934 3. DEMKO refer Certificate No.: 132956-01 4. FIMKO refer Certificate No.: FI 16139 5. OVE refer OVE-Certification Marks.doc 檔案. < Ö VE > for Cables, flexible cords and conduits < Ö VE > <HAR> for Cables and cords complying with harmonized Standards 6. KEMA refer KEMA Certificate No.:2021582/01 7. SEMKO refer Certificate No.: 0120264/01-03 8. CEBEC refer the following information. Question: CEBEC marking printed on cable is very difficult for us, so, we want print "CEBEC " on our cables that approved by CEBEC. Is it right? Answer(from "Peggy Marchoul" <peggy.marchoul@cebec.be>): As far as the cables certified for you by CEBEC fall under the HAR certification, you may print CEBEC <HAR> on your cables 9. IMQ refer Certificate No.: A2774 10. SEV refer Licence No.: 8807/02 2.23 澳洲電源線 Tinsel Flexible Cord 用途. Tinsel Flexible Cord is recognized only for the connection of equipment of small current rating where extreme flexibility is required. (refer to AS/NZS 3100:1997 4.4) 2.24 澳洲電器設備對電源接線的規定. Tinsel flexible cord and flexible cord with conductors having a nominal crosssection area of 0.5sqmm shall not be used for earthing purposes. Prepared by Tonyfeng Page:220 / Total Page:250 Issued Data: 03/06/24

(refer to AS/NZS 3100:1997 4.4) Prepared by Tonyfeng Page:221 / Total Page:250 Issued Data: 03/06/24

Chapter 3 插頭 / 插座設計篇 3.1 Cord set 定議是甚麼? An assembly that consists of a flexible cord fitted with a plug and with an appliance connector, and that is intended to connect an electrical appliance or equipment to the electrical supply. (Refer to SABS 1661:1996) 將電器連接到電源的組件, ㆒端有不可拆線插頭, 另㆒端有不可拆線的連接器. (Refer to GB2099.1:1996) 3.2 Cord extension set 定議是甚麼? An assembly that consists of a flexible cord fitted with a one or more socket-outlets and that can incorporate a switch or switchs, a circuit-breaker, an earth leakage unit, or a thermal over-current unit, or a combination of these. (Refer to SABS 1661:1996) An assembly of a three-pin plug and a sheathed flexible cord and a cord extension socket. (Cord extension socket--- a device arranged fot attachment to a flexible cord and having contacts whereby a detachable connection can be made with pins of a plug refer AS/NZS 3120:1999) (Refer to AS/NZS 3199:2000) 電線加長組件, ㆒端有不可拆線插頭, 另㆒端有不可拆線移動式插座. (Refer to GB2099.1:1996) 3.3 Socket-outlet 定議是甚麼? An accessory that has socket-contacts designed to engage with the pins of a plug and that has terminals for the purpose of connecting cables. (Refer to SABS 1664:1996) 與插頭插銷配合的插套 + 端子 ( 用於軟線連接 ) 构成的電器附件. (Refer to GB2099.1:1996) 3.4 Plug 定議是甚麼? An accessory that has pins designed to engage with the contacts of a socketoutlet and that incorporates a means for the electrical connection to and mechanical retention of flexible cables. (Refer to SABS 1664:1996) 與插套配合的插銷 + 與軟線進行電氣連接和機械定位的部件构成的電器附件. (Refer to GB2099.1:1996) 3.5 南非插頭 CS-004SA(6A 250V), CS-006SA(16A 250V) 插頭尺寸設計依据? Two-pole and earthing-pin plugs Prepared by Tonyfeng Page:222 / Total Page:250 Issued Data: 03/06/24

CS-004SA(6A 250V) 依據 SABS164-1:1997 sheet 2-1 設計. CS-006SA(16A 250V) 依據 SABS164-1:1997 sheet 2-2 設計. 3.6 南非插頭 CS-004SA(6A 250V), CS-006SA(16A 250V) 插頭安全性能要求? 依據 SABS1664-1996 and Amendment No1:1997.06.09, Safety of household plugs, socket-outlets and socket outlets adaptors. 述標準完全引用了 SABS IEC884-1,Plug and socket-outlets for household and similar purpose-part 1: General requirements. 即完全采用了 IEC 標準. 3.7 NEMA 1-15P 插頭是甚麼意思? NEMA: National Electrical Manufacturers Association ( 美國國家電氣制造商協會 ) National Electronic Manufacturing Association ( 國家電子制造聯合會 ) 我們所使用的插頭呎寸標準來自 National Electrical Manufacturers Association. NEMA1-15P 在標準 NEMA Standard Publication No.WD6 有規定. 此標準名稱為 Wiring Devices Dimensional Specifications, 在 1997 年 9 月份被 ANSI(American National Standard Institute) 批準. The purpose of this standard is to present the dimensional of wiring devices in order to assist the user in selecting and obtaining the proper product for a particular need and to minimize the possibility of unsafe interchangeability between configurations. NEMA 1-15P 的 1 表示額定電壓為 125V, 15 表示額定電流為 15A, P 表示插頭 (Plug); NEMA1-15R 的 R 表示插座 (Receptacle). 目前周氏產品與 NEMA 的型號對應關係 : 1-15R: 1-15P: 5-15R: SP-019,032,034. SP-002,002P,020,020P,021,021,021AP,033,033P,120,120P. SP-044,053,054,055,058,081 5-15P: SP-003,003A,004,005,007,022,022A,022A-W,022A- ZS, 035, 5-20P: 6-15P: 6-20P: 7-15P: 7-20P: 7-30P: 10-30P: 14-30P: 14-50P: 035A,037,043,056,057,080. SP-010,039. SP-008,038,042. SP-009,040. SP-090,093. SP-091,094. SP-092,095. SP-062. SP-060,061. SP-065,066. 注 : 5--125V, 6--250V, 7--277V, 10--125/250V, 14--125/250V, 述產品全部為 Non-locking plugs and receptacles, 另外標準還規定了其 Prepared by Tonyfeng Page:223 / Total Page:250 Issued Data: 03/06/24

它插頭插座的呎寸, 如 : Locking plugs and receptacles, Specific purpose plugs and receptacles. 3.8 是否有世界通用插頭插座系統? 基于各國的插頭插座之適配性差, IEC 組織曾制定了㆒個標準 IEC906-1 作為世界通用插頭插座系統, 但至今未被任何㆒個國冢采用, 仍不能解決插頭插座世界通行的問題. 3.9 香港插頭插座采用何种標準? 香港政府於 1994 年發布的電力條例 406 章規定, 凡是出口到香港區的插頭插座必需符合 BS1363 和 BS546 標準. 3.10 GB2099.1-1996 等效采用了 IEC60884-1:1994 標準, 在編寫格式保持了㆒致, 兩者之間有哪些差別? a) IEC60884-1 定議了 3 种額定電壓值 : 130V, 250V, 440V. 我國不使用 130V, 故 GB2099.1 只保留了 250V 和 440V, 其 250V 與 GB1002 相適應, 440V 與 GB1003 相適應. b) IEC60884-1 定議了 5 种額定電流值 : 2.5A, 6A, 10A, 16A, 32A. 我國不使用 2.5A 等級, 故 GB2099.1 只保留了 6A, 10A, 16A, 32A 這 4 個等級. c) IEC60884-1 定議了 2 种電源的額定頻率 : 50Hz, 60Hz. 我國不使用 60Hz 等級, 故 GB2099.1 只保留了 50Hz. d) IEC60884-1 包括扁插頭插座系統和圓插頭插座系統, 因我國僅采用扁插頭插座系統, 故 GB2099.1 只保留了扁插頭插座系統. e) IEC60884-1 規定插頭插座的工作環境溫度通常不超過 25, 偶爾達到 35, 這是基於歐洲國家而制定的, 而為了滿足我國的氣候條件, 標準 GB2099.1 規定插頭插座的工作環境溫度通常不超過 35, 偶爾達到 40. 故凡在 IEC60884-1 規定在 35 條件進行的試驗,GB2099.1 將規定在 40 條件進行. 3.11 兩极插頭插座不分极性是否安全? a) 在家用電器標準, 家用電器㆒般采用 Ⅰ 類絕緣和 Ⅱ 類絕緣結構. 對于 Ⅰ 類絕緣結構要求帶保護接, 故需采用單相接插頭插座 ; 對于 Ⅱ 類絕緣結構, 要求雙重絕緣而不必接, 用兩极插頭插座雖不分极性, 仍安全可靠. b) 若兩极插頭插座分极性, 則對家用電器的絕緣要求降低, 對電源要求增 Prepared by Tonyfeng Page:224 / Total Page:250 Issued Data: 03/06/24

高, 在供電電源因維修發生极性變化時, 反而引起不安全. c) 國際, 有許多國家的插頭插座 ( 兩极 ) ㆒般都不分极性, 用于直流的情況除外. 3.12 Ⅰ 類設備, Ⅱ 類設備是甚麼意思? 關於設備的分類在 IEC335-1 有規定, 該標準規定了 5 類設備, 分別為 : 0, 0Ⅰ, Ⅰ, Ⅱ, Ⅲ. (Refer to IEC335-1: 1991, Safety of household and similar electrical appliance Part 1) Class 0 Appliance: Appliance in which protection against electric shock relies upon basic insulation; implies that there are no means for the connection of conductive accessible parts, if any, to the protective conductor in the fixed wiring of the installation reliance in the event of a failure of the basic insulation being placed upon the environment. GB/T12501:1990 對 0 類設備的定議 : 0 類設備是僅依靠基本絕緣作為防触電保護的設備, 當設備有可触及的導電部分時, 該部分不與設施固定佈線的保護 ( 接 ) 線相連接, ㆒旦基本絕級失效, 則安全取決于使用環境. 因此 0 類設備的插頭, 僅是依靠基本絕緣作為防触電保護的, 沒有接极. Class 0ⅠAppliance: Appliance having at least basic insulation throughout and incorporating with an earthing terminal but with a supply cord without earthing conductor and a plug without earthing contact. ClassⅠAppliance: Appliance in which protection against electric shock does not relies upon basic insulation only but which includes an additional safety precaution in that conductive accessible parts are connected to the protective earthing conductor in the fixed wiring of the installation in such a that way conductive accessible parts can not become live in the event of a failure of the basic insulation. GB/T12501:1990 對 Ⅰ 類設備的定議 : ClassⅡAppliance: Ⅰ 類設備的防触電保護不僅依靠基本絕緣, 還包括㆒种附加的安全措施, 即能触及的導電部分與設施固定布線的保護接 ( 線 ) 相連接. 所以對于 Ⅰ 類設備用的插頭, 除應有基本絕緣外, 還必需具備接极. Prepared by Tonyfeng Page:225 / Total Page:250 Issued Data: 03/06/24

Appliance in which protection against electric shock does not relies upon basic insulation only but in which additional safety precautions, such as double insulation or reinforced insulation, are provided, there being no provision for protective earthing or reliance upon installation conditions. GB/T12501:1990 對 Ⅱ 類設備的定議 : Class Ⅲ Appliance: 說明 : Ⅱ 類設備的防触電保護不僅依靠基本絕緣, 還應具備雙重絕緣或加強絕緣這樣的安全措施. 這种設備不采用保護接的措施, 也不依賴於安裝條件. 因此 Ⅱ 類設備用的插頭, 除應有基本絕緣外, 還應具備雙重絕緣或加強絕緣, 與 Ⅱ 類設備的防觸電措施相㆒致. Appliance in which protection against electric shock relies on supply at safety extra-low voltage and in which higher than those of safety extra-low voltage are not generated. 分類的數字只表示設備防觸電保護所采用的方式, 並不反映設備的安全等級. 按照這㆒分類, 防觸電保護是由周圍環境, 設備本身或供電系統提供. 3.13 插頭表面印字 IP44 是甚麼意思? IP International Protection 第㆒位特征數字取值範圍 0~6, 對設備防護含意為 : 防止固體異物進入, 4 表示防止 >=Φ1.0mm 的固體異物進行 ; 對員的防護含意為 : 防止接近危險部件, 4 表示防止觸及金屬線. 第㆓位特征數字取值範圍 0~8, 表示防水等級, 4 表示防濺水 (Splashproof), 即防止在外殼各個方面濺水對設備的影響. (Refer to GB4208: 1993 等同采用 IEC529: 1989. 外殼防護等級 (IP 代碼 )) 3.14 插頭的極性標識 : N Neutral( 性線, 或稱零線 ) L Live( 火線, 或 Hot) E Earth( 線, 或 Ground) 3.15 器具耦合器的定議是甚麼? Appliance coupler 定議 (Refer to GB17465.1:1998) 指可以任意使電源軟線與器具或其它設備連接或斷開的耦合器, 由連接器 (connector) 和器具輸入插座 (appliance inlet) 組成. 分類方法 : A) Prepared by Tonyfeng Page:226 / Total Page:250 Issued Data: 03/06/24

按相應的器具輸入插座的插銷底座的最高插銷溫度劃分 : B) C) 用於冷條件的器具耦合器, 插銷最高溫度不超過 70 度. 用於熱條件的器具耦合器, 插銷最高溫度不超過 120 度. 用於酷熱條件的器具耦合器, 插銷最高溫度不超過 155 度. 按被連接的器具或設備的類型進行劃分. 用於 Ι 類器具或設備的器具耦合器. 用於 Ⅱ 類器具或設備的器具耦合器. 連接器按軟線的連接方法劃分 : 可拆線連接器. 不可拆線連接器. 3.16 接符號如何標識? 采用述帶圈符號的標準 : GB17465.1:1998( 也可采用不帶圈的符號, 但需優先采用帶圈的符號 ). SS145:Part1:1997 ( 也可采用不帶圈的符號或 E, 但需優先采用帶圈的符號 ) BS1363:Part3:1995 ( 也可采用不帶圈的符號, 但需優先采用帶圈的符號 ) NBR6147: 1998. SABS164-2: 1997. JIS C8303: 1993 Plugs and receptacles for domestic and similar general use 采用述不帶圈符號的標準 : GB2099.1: 1996. 根据全國電器附件標準化技術委員 2001 年第 004 號函件, 對于接志帶圈或不帶圈的問題進行了聲明, 因 IEC60884-1 未作更改, 故 GB2099.1 需與國際標準㆒致, 暫不更改, 如果整機廠提出此問題, 可以做解釋. 接標誌是否改為帶圈樣式, 需視 ㆒步國際標準 IEC60884-1 的修訂情況而定. IEC60884-1: 1994 CSA General use receptacles, Attachment plugs, and Similar wiring Device. NORMA IRAM2073:1996 阿根廷 SEV/ASE6534-2:1991 瑞士 IS:1293:1988 印度采用述符號. 3.17 國家用插頭插座型式有哪些? Prepared by Tonyfeng Page:227 / Total Page:250 Issued Data: 03/06/24

插頭型式有 3 种. 插座型式有 4 种. 3 种插頭型式分別為 : 6A,10A 兩极無接插頭. 6A,10A 兩极帶接插頭. 16A 兩极帶接插頭. 4 种插座型式分別為 : 10A 兩极無接插座. 10A 兩极帶接插座. 16A 兩极帶接插座. 10A 兩极無接圓扁兩用插座. (Refer to GB2099.1:1996 和 GB1002:1996) 3.18 國家用插頭用的插片有几种呎寸結構? 只有 2 种, 呎寸結構為 : 1.5X6.4mm-- 用于 6A,10A 兩极無接或帶接插頭. 1.8X8.1 mm-- 用于 16A 兩极帶接插頭. (Refer to GB2099.1:1996 和 GB1002:1996) 3.19 國家用插座用的插套端子有几种呎寸結構? 只有 3 种, 呎寸結構為 : 2.0X7.3mm-- 用于 10A 兩极無接或帶接插座. 2.4X9.0mm-- 用于 16A 兩极帶接插座. 2.0X7.3X2.8mm-- 用于 10A 兩极無接圓扁兩用插座. (Refer to GB2099.1:1996 和 GB1002:1996) 3.20 奧洲 3-pin 插頭是否可配 2 芯線? AS/NZS 3112:2000 標準 2.8.2 Integrally moulded plug and cord 規定 : A two-core flexible cord may be integrally moulded with a three-pin plug. 3.21 奧洲尾插 (appliance coupler) 的電流等級與配線關係? AS/NZS 3109.1:1996 標準 22 Cords and their connection 規定 : 0.2A--- 對導體截面無要求, 但長度不能超過 2m. 2.5A--- 0.75mmsq. If for class II equipment, a nominal cross-section area of 0.5mmsq is allowed, but length not exceeding 2m. 10A--- 0.75mmsq, for cold conditions, length not exceeding 2m. 1.0mmsq, for cold conditions, length exceeding 2m. 3.22 IEC 成員國, 家用及類似用途插頭插座有哪些种類? 國際電工委員會 IEC/SC23B: 插頭插座開關分技術委員會的標準 IEC83--- 家用和類似用途插頭插座, 綜合了世界各主要工業發達國家的插頭插座, 將其歸類為 3 組, 分別為 A 組, B 組和 C 組. A 組 --- 扁型插銷, 是按照美國國家標準協會批準的標準設計的插關插座. Prepared by Tonyfeng Page:228 / Total Page:250 Issued Data: 03/06/24

采用的國家 : 加拿大, 美國, 日本, 澳大利亞, 國, 新西蘭等. B 組 --- 分為矩型和圓型插銷, 現在圓型逐步被淘汰. 是按照英國標準化學會批準的標準設計的插頭插座. 采用的國家 : 英國, 印度, 巴基斯坦, 南非等. C 組 --- 圓型插銷, 是按國際電氣設備認証委員會批準設計的插頭插座. 采用的國家 : 奧利, 比利時, 捷克, 斯洛伐, 丹麥, 芬蘭, 德國, 法國, 兇牙利, 意大利, 荷蘭, 挪威, 波蘭, 葡萄牙, 瑞士, 瑞典等. 但每個國家只采用其的部分, 各國之間均不能通用. 3.23 澳洲插頭電流等級和配線截面之間的關係. 標準 AS/NZS 3112:2000 1.2.1 規定 : This standard shall be read in conjunction with AS/NZS 3100 and the appropriate provisions of AS/NZS 3100 shall apply to the construction of a plug or socket-outlet and the insulation and safeguarding of parts which normally carry current. 標準 AS/NZS 3100: 1997 的規定. 1) Any material, fitting, cable, accessory, appliance or apparatus used in, or in connection with, an electrical installation shall comply with the appropriate Australian Standard. In the absence of any such Standard, the appropriate provisions of this Standard shall apply. (refer to AS/NZS 3100: 1997 1.2Application) 2) Any portable equipment having a rating not exceeding 20A at low or medium voltage shall be provided with a supply flexible cord. The flexible cord shall --- Comply with AS/NZE 3191 Be of the appropriate current rating Be correctly wired to a plug of appropriate type complying with AS/NZS 3122 or alternatively, for equipment with a rating not exceeding 600W, with a plug socket adapter complying with AS/NZS 3122. Power supply cords shall have a nominal cross-sectional area not less than those given in Table 4.4. (refer to AS/NZS 3100: 1997 4.4 Flexible cord and connecting plug) 3) Table 4.4 Minimum Nominal Cross-section Area of Power Supply Cables and Cords. Rated current of equipment(a) Nominal cross-section area(sqmm) <=0.2 >0.2 <=3.0 >3.0 <=7.5 >7.5 <=10. Tinsel cord* 0.5# 0.75 1.0 Prepared by Tonyfeng Page:229 / Total Page:250 Issued Data: 03/06/24

>10. <=16. >16. <=25. 1.5 2.5 * This type of cord is only allowed if specifically stated in the relevant particular Specification and if the length of the power supply cord measured between the point where the cord, or cord guard, enters the equipment and the entry to the plug, does not exceed 2m.There is no cross-sectional area specified for tinsel flexible cords. # This nominal cross-sectional area is only allowed for Class II equipment if the length of the power supply cord, measured between the point where the cord, or cord guard, enters the appliance, and the entry to the plug, does not exceed 2m. 3.24 澳洲電源線 Light, Ordinary, Heavy duty 如何理解. 參考標準 as/nzs 3191:1996. Light duty flexible cord. 額定電壓等級為 250/250V PVC 線的描述為 : 250/250V thermoplastic PVC insulated and sheathed, light duty 2-core flat, and 2- or 3-core circular flexible cords. Ordinary duty flexible cord. 額定電壓等級為 250/440V PVC 線的描述為 : 1) 250/440V thermoplastic PVC insulated and sheathed, ordinary duty 2-, 3-, 4-, or 5-core circular flexible cords. 2) 250/440V thermoplastic PVC insulated and sheathed, ordinary Heavy duty flexible cord. duty 2-core flat flexible cords. 額定電壓等級為 0.6/1KV PVC 線的描述為 : 0.6/1KV thermoplastic PVC insulated and sheathed, heavy duty 2-, 3-, 4-, or 5-core circular flexible cords. 另外, AS/NZS 3100:1997 4.4.1 規定了 Light duty, Ordinary duty 電源線的使用場合. 電器設備用的電源線不得小于如規定 ( 除非設備標準另有規定 ): 1) if elastomer insulated, ordinary duty sheathed flexible cord. 2) If PVC insulated a) for eqipment having a mass not exceeding 3kg, light duty sheathed flexible cord. b) For equipment having a mass exceeding 3kg, ordinary duty sheathed flexible cord. 3.25 日本插頭, 尾插電流等級與配線關係 Refer to JIS C 8303: 1993 Plugs and receptacles for domestic and similar general use. Prepared by Tonyfeng Page:230 / Total Page:250 Issued Data: 03/06/24

The rated currents of molded-on connector and cord connector bodies shall be as specified in Table2 according to the size of the cord attached. Table 2. Rated current of molded-on connector and cord connector body. Rated current of connector 7A(7 or 8A) 0.75sqmm 12A(14A) 15A(15A) 20A(20A) Size of attached cord(nominal sectional area) 1.25sqmm 2.0sqmm 3.5sqmm 括號的數據對應 heat resistant cord 配線, 其它數據對應 general cord 配線. 日本標準 JIS C8303 對插頭插座統稱為 Connectors. 參見 1.Scope 部分. Modled-on connector 定義 : This is a connector, in which the terminal and cord are connected by welding, crimping, or by other means, and this assembly is molded with thermoplastic resin or the like. Cord connector body 定義 : This is a kind of receptacle of connector having a blade receiver, means for connecting cords(including cabtire cable). It is used, without fixing, for extension of cords. 3.26 歐洲各國插頭 & 尾插認証標誌. 依據 : 1). VDE refer Marks Licence No.: 40000141 2). NEMKO refer Certificate No.: P02100506 3). DEMKO refer Certificate No.: 00-00406 4). FIMKO refer Certificate No.: FI 17461 5). OVE refer Certificate No.: 628-326-02 6). KEMA refer Certificate No.: 2028930.01 7). SEMKO refer Certificate No.: 9730012101 8). CEBEC refer Certificate No.:12585 988---User s Contract No.( 周氏与 CEBEC 的認証協議編號 ) 9). IMQ refer Certificate No.: EF305 10). SEV refer Licence No.: 01.1221 FM9--- 制造商代碼. 11). UTE refer Certificate No.: 27967-969 歐洲各國插頭 & 尾插認証標誌. 1224--- 制造商代碼. Prepared by Tonyfeng Page:231 / Total Page:250 Issued Data: 03/06/24

FM9 3.27 如何理解 UL817 標準的 Load Fitting, Line Fitting? 可以從如資料理解 : 1) UL817:2001.03.16 標準 2.6 對 CORD SET 的定議 A length of flexible cord assembled: a) with an attachment plug or current tap as a line fitting, and a cord connector as a load fitting, and with or without a through-cord switch or b) With a series-connected current tap and a pendant switch. 2) UL817:2001.03.16 標準 2.9 對 Detachable Power Supply Cord 的定議 A length of flexible cord assembled with an attachment plug or current tap as a line fitting and with a single outlet appliance as a load fitting, with or without a through-cord switch. The load fitting is intended to mate with the motor attachment cap of an appliance. 3) UL817:2001.03.16 標準 2.12 對 Non-Detachable Power Supply Cord 的定議 A length of flexible cord assembled without a load fitting(appliance coupler) but with an attachment plug or current tap as a line fitting, with or without a through-cord switch for direct connection to an appliance. Line Fitting 可能理解為與電网連接的插頭和電線部分. Load Fitting 可以理解為尾插 ( 器具耦合器 ) Prepared by Tonyfeng Page:232 / Total Page:250 Issued Data: 03/06/24

Chapter 4 聯接配線篇 4.1 端子壓接的 8 大檢查點? 開筒式端子壓接 8 大檢查點 : 1. 線芯槽前端可以看到線芯. 2. 在線芯槽和膠皮槽之間可以看到線芯和膠皮. 3. 線芯槽有喇叭口形狀. 4. 可以看到料帶之末端. 5. 線芯槽壓接后的高度平均和接縫緊閉. 6. 不可以有線芯露出線芯槽接縫外面. 7. 端子背面的披鋒或毛刺不能太多. 8. 端子接觸面不能變形. 圖為 110 端子壓接形狀. 注 : Wire barrel bellmouth: crimp tooling and terminal alignment should be such a definite bellmouth, is evident at the rear (wire end) of the wire barrel. This feature eliminates the abrupt change form the reduced cross section of the crimp to the full diameter of the wire. It is necessary to maintain the mechanical integrity of the wire. Too much bellmouth at the rear (wire end) or bellmouth at the front (contact) of the wire barrel reduces the effective length of the crimp and its current carrying capability. End terminal feed: The terminal feed has been properly adjusted when the cut-off tab is centered on the bottom of the crimped terminal with equal length to the front and rear of the terminal. A cut-off tab exceeding 0.02 maximum can Prepared by Tonyfeng Page:233 / Total Page:250 Issued Data: 03/06/24