TVS/ESD 產品 攜帶型產品應用 Page: 1
BKSD05TS / BKSD05W / SMF12A ( I ) SOD-523 (0603) SOD-323 (0805) SOD-123FL (1206) VF IF VR VZ (V) The series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDAs. It features large cross-sectional area junctions for conducting high transient currents. Page: 2 Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (tp = 5/50ns) Cable Discharge Event (CDE) Protects one I/O or power line Low clamping voltage Working voltage: 5~24V Low leakage current Ultra-small 0603, 0805, 1206 packages
BKSOT05 / BKSOT12 BKSOT05 Vishay GS0T05 Protek SOT05 The BKSOT05 series of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 3 5 V working voltage 500 Watts peak pulse power (tp = 8/20 μs) Protects one Unidirectional line Transient protection for data & power lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 24 A (8/20 μs) Low clamping voltage
BKSOT05C / BKSOT12C The BKSOT05C series of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 4 BKSOT05C ONsemi SM05T1 Semtech SM05 Philips PESD5V2S2UT 5 V working voltage 500 Watts peak pulse power (tp = 8/20 μs) Protects one bidirectional line or two unidirectional lines Transient protection for data & power lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 24 A (8/20 μs) Low clamping voltage
BKSDA6V1W5 BKSDA6V1W5 STM ESDA6V1W5 ON semi MSQA6V1W5T2 The BKSDA6V1W5 series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for use in applications where board space is at a premium. Page: 5 Protects 4 I/O lines Working voltage: 5 V Transient protection for data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) Small package for use in portable electronics Low leakage current Low operating and clamping voltages
BKSMS05 / BKSMS05C BKSMS05 Protek / SMS05 Semtech SMS05 ON semi SMS05 The BKSMS series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Page: 6 BKSMS05C Protek / SMS05C Semtech SMS05C ON semi SMS05C Transient protection for data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 24 A (8/20 μs) Small package for use in portable electronics Protects five I/O lines 5~24 V working voltages Low leakage current Low operating and clamping voltages
BKSMDA05 / BKSMDA05C BKSMDA05 Page: 7 The BKSMDAxx series of TVS arrays are designed to provide undirectional protection for sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. BKSMDA05C Working voltage: 5 V~24V Transient protection for data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 12 A (8/20 μs) Undirectional & Bidirectional protection Small SO-8 package Protects four I/O lines Low leakage current Low operating and clamping voltages
BKSMDA05-6 The BKSMDA series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 8 ESD protection to 300 watts peak pulse power (tp = 8/20 μs) Transient protection for data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 12 A (8/20 μs) Protects up to 6 unidirectional lines Low operating voltage Low clamping voltage
BKDLC05 / BKDLC12 NOTEBOOK GRAPHICS CARD FLAT PANEL DISPLAY TX0+ RX0+ BKDLC05 BKDLC05 TX1- RX1- VGA TX1+ TX2- BKDLC05 BKDLC05 RX1+ RX2- LCD TX2+ BKDLC05 BKDLC05 RX2+ The BKDLC05 series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Each device will protect two high-speed lines. Page: 9 TX0- TC- TC+ DVI TRANSMITTER BKDLC05 BKDLC05 Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) Protects up to two I/O lines Ultra-Low capacitance (<1pF) Low leakage current and clamping voltage RX0- RC- RC+ DS RECEIVER Digital Video Interface (DVI) Protection -- existed version
BKLCDA05 / BKLCDA12 Hi-Speed Singal 1 Hi-Speed Singal 2 Hi-Speed Singal 3 Hi-Speed Singal 4 Controller Page: 10 The BKLCDA series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Each device will protect two high-speed lines. 5 V~24V working voltage Transient protection for high-speed data lines to IEC 61000-4- 2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 12 A (8/20 μs) Protects two I/O lines Low capacitance for high-speed data lines Low leakage current Low operating and clamping voltages
BKLC1V5D Low volt. up I/O I/O The BKLC1V5D is designed to protect two high-speed data lines (two differential pairs) from transient over-voltages which result from lightning and ESD. Page: 11 Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) Protects up to two I/O lines Ultra-Low capacitance (<1pF) Low leakage current and clamping voltage
BKSLUV2.8 BKSLUV2.8 Semtech / SLUV2.8 Protek / SLUV2.8 The BKSLV2.8 of transient voltage suppressors are designed to protect low voltage, state-of-theart CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Page: 12 One device protects one unidirectional line Two devices protect two high-speed line pairs 400 Watts peak pulse power (tp = 8/20 μs) Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) Low capacitance Low leakage current Low operating and clamping voltages Solid-state EPD TVS process technology
BKSLUV2.8-4 BKSLUV2.8-4 Semtech SLUV2.8-4 Protek SLUV2.8-4 The BKSLV2.8-4 series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Page: 13 Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (lightning) 1 kv, 24 A (8/20 μs) Array of surge-rated diodes Protects four I/O lines Low capacitance for high-speed interfaces High surge capability Low forward voltage characteristics
BKClamp0504A BKClamp0504A Semtech uclamp0504a ON semi NZQAx6V8XV5T1 Philips BZA900A The BKClamp0504A series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. Page: 14 Protects up to 4 unidirectional I/O lines. Working voltage: 5 V. Placeable in the SOT-553 package layout. Transient protection for data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact).. Ultra-small QFN 1.6x1.6 package requires less than 2.9 mm2 of PCB area. Low leakage current. Low operating and clamping voltages..
BKQMF05LC BKClamp0504A NUP5120X6 uclamp0505a The BKQMF05LC series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. Page: 15 Protects up to 5 unidirectional I/O lines or 4 bidirectional I/O lines. Working voltage: 5 V. Placeable in the SOT-563 package layout. Transient protection for data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact).. Ultra-small SC-89 package (1.7 x 1.7 x 0.6 mm) requires less than 2.9 mm2 of PCB area. Low leakage current. Low operating and clamping voltages..
BKT5V0BQG 12.0 12.0 25.0 18.0 23.0 49.0 53.0 19.7 Suggested Pad Layout (in mils) 19.7 Alternate Pad Layout SOT666 (in mils) The BKT5V0BQG series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Page: 16 Transient protection for data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 24 A (8/20 μs) Placeable in the SOT-666 package layout. Protects five I/O lines 5 V working voltages Low leakage current Low operating and clamping voltages
BKESD5V0BQ4G 12.0 12.0 25.0 18.0 23.0 49.0 19.7 Suggested Pad Layout (in mils) Page: 17 19.7 53.0 Alternate Pad Layout SOT666 (in mils) The BKESD5V0BQ4G series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. 300 watts peak pulse power (tp = 8/20 μs) Protects up to 4 bidirectional lines Placeable in the SOT-666 package layout. Working voltage: 5 V ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (lightning) 12 A (8/20 μs) Low leakage current Low operating voltage Low clamping voltage Small SO-8 surface-mount package
BKESD5V0Q4G 12.0 12.0 25.0 18.0 23.0 49.0 53.0 19.7 Suggested Pad Layout (in mils) 19.7 Alternate Pad Layout SOT666 (in mils) The BKESD5V0Q4G series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 18 300 watts peak pulse power (tp = 8/20 μs) Protects up to 4 Unidirectional lines Working voltage: 5 V ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (lightning) 12 A (8/20 μs) Low leakage current Low operating voltage Low clamping voltage Small SO-8 surface-mount package
BKClamp0502B BKClamp0502Q RClamp0502B The BKClamp0502Q series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Each device will protect two high-speed lines. Page: 19 Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Placeable in the SOT-523 package layout. Protects up to two I/O lines Ultra-Low capacitance (<1pF) No insertion loss to >3.0GHz Low profile (<1mm) Low leakage current and clamping voltage Low operating voltage: 5.0V
BKSR05 BKSR05 Semtech SR05 Philips PRTR5V0U2X BKSR05 are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 20 ESD protection to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (lightning) 1 kv, 24 A (8/20 μs) Array of surge-rated diodes with internal TVS diode Protects 2 I/O lines Low capacitance (< 10 pf) for high-speed interfaces Low clamping voltage Low operating voltage: 5.0 V
BKUSBLC6-2 V BUS V BUS V BUS V BUS BKUSBLC6-2 STM BKUSBLC6-2 V BUS D+ D- D+ D- V BUS GND GND BKUSBLC6-2 are surge rated diode arrays designed to protect high speed data interfaces. The BKUSB series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 21 USB controller BKUSBLC6-2 BKUSBLC6-2 5 V working voltage Protects four I/O lines ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 12 A (8/20 μs) Array of surge rated diodes with internal TVS Diode Small package saves board space Low capacitance: 3 pf typical Low clamping voltage USB controller
BKSRV05-4 BKSRV05-4 Semtech SRV05-4 Philips IP4220CZ6 STM DVIULC6-4SC6 V BUS V BUS D+ BKSRV05-4 are surge rated diode arrays designed to protect high speed data interfaces. The BKSR series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 22 USB controller BKSRV05-4 5 V working voltage Protects four I/O lines ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 12 A (8/20 μs) Array of surge rated diodes with internal TVS Diode Small package saves board space Low capacitance: 3 pf typical Low clamping voltage V BUS V BUS D- GND V BUS D+ D- GND
BKSR70 BKSR70 Semtech SR70 BKSR70 is the surge rated diode arrays designed to protect high speed data interfaces. The BKSR70 has been specifically designed to protect sensitive components which are connected to data and transmission lines from over-voltages caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. CMD CM1210-02 Page: 23 Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 1 kv, 24 A (8/20 μs) Array of surge-rated, low-capacitance diodes Protects two I/O lines Low capacitance (5 pf typical) for high-speed interfaces Low clamping voltage
BKUSB208 V BUS D+ D- USB Transceiver GND Vcc BKUSB208 is surge rated diode arrays designed to protect high speed data interfaces. The BKUSB208 series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 24 V BUS D+ D- GND USB Transceiver Protects four I/O lines ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (Lightning) 12 A (8/20 μs) Array of surge rated diodes Small package saves board space Low capacitance: 3 pf typical Low clamping voltage
BKRDA200-4 I/O up BKRDA200-4 is surge rated diode arrays designed to protect high speed data interfaces. The BKRDA200-4 has been specifically design e d to protect sensitive components which are connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. Page: 25 BKRDA200-4 Semtech SRDA70-4 Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ± 15 kv (air), ± 8 kv (contact) IEC 61000-4-5 (lightning) 1 kv, 24 A (8/20 μs) Array of surge-rated diodes Protects four I/O lines Low capacitance for high-speed interfaces High surge capability Low forward voltage characteristics 5V
易迪拓培训 专注于微波 射频 天线设计人才的培养网址 :http://www.edatop.com 射频和天线设计培训课程推荐 易迪拓培训 (www.edatop.com) 由数名来自于研发第一线的资深工程师发起成立, 致力并专注于微波 射频 天线设计研发人才的培养 ; 我们于 2006 年整合合并微波 EDA 网 (www.mweda.com), 现已发展成为国内最大的微波射频和天线设计人才培养基地, 成功推出多套微波射频以及天线设计经典培训课程和 ADS HFSS 等专业软件使用培训课程, 广受客户好评 ; 并先后与人民邮电出版社 电子工业出版社合作出版了多本专业图书, 帮助数万名工程师提升了专业技术能力 客户遍布中兴通讯 研通高频 埃威航电 国人通信等多家国内知名公司, 以及台湾工业技术研究院 永业科技 全一电子等多家台湾地区企业 易迪拓培训推荐课程列表 : http://www.edatop.com/peixun/tuijian/ 射频工程师养成培训课程套装该套装精选了射频专业基础培训课程 射频仿真设计培训课程和射频电路测量培训课程三个类别共 30 门视频培训课程和 3 本图书教材 ; 旨在引领学员全面学习一个射频工程师需要熟悉 理解和掌握的专业知识和研发设计能力 通过套装的学习, 能够让学员完全达到和胜任一个合格的射频工程师的要求 课程网址 :http://www.edatop.com/peixun/rfe/110.html 手机天线设计培训视频课程该套课程全面讲授了当前手机天线相关设计技术, 内容涵盖了早期的外置螺旋手机天线设计, 最常用的几种手机内置天线类型 如 monopole 天线 PIFA 天线 Loop 天线和 FICA 天线的设计, 以及当前高端智能手机中较常用的金属边框和全金属外壳手机天线的设计 ; 通过该套课程的学习, 可以帮助您快速 全面 系统地学习 了解和掌握各种类型的手机天线设计, 以及天线及其匹配电路的设计和调试... 课程网址 : http://www.edatop.com/peixun/antenna/133.html WiFi 和蓝牙天线设计培训课程该套课程是李明洋老师应邀给惠普 (HP) 公司工程师讲授的 3 天员工内训课程录像, 课程内容是李明洋老师十多年工作经验积累和总结, 主要讲解了 WiFi 天线设计 HFSS 天线设计软件的使用, 匹配电路设计调试 矢量网络分析仪的使用操作 WiFi 射频电路和 PCB Layout 知识, 以及 EMC 问题的分析解决思路等内容 对于正在从事射频设计和天线设计领域工作的您, 绝对值得拥有和学习! 课程网址 :http://www.edatop.com/peixun/antenna/134.html
` 易迪拓培训 专注于微波 射频 天线设计人才的培养网址 :http://www.edatop.com CST 学习培训课程套装该培训套装由易迪拓培训联合微波 EDA 网共同推出, 是最全面 系统 专业的 CST 微波工作室培训课程套装, 所有课程都由经验丰富的专家授课, 视频教学, 可以帮助您从零开始, 全面系统地学习 CST 微波工作的各项功能及其在微波射频 天线设计等领域的设计应用 且购买该套装, 还可超值赠送 3 个月免费学习答疑 课程网址 :http://www.edatop.com/peixun/cst/24.html HFSS 学习培训课程套装该套课程套装包含了本站全部 HFSS 培训课程, 是迄今国内最全面 最专业的 HFSS 培训教程套装, 可以帮助您从零开始, 全面深入学习 HFSS 的各项功能和在多个方面的工程应用 购买套装, 更可超值赠送 3 个月免费学习答疑, 随时解答您学习过程中遇到的棘手问题, 让您的 HFSS 学习更加轻松顺畅 课程网址 :http://www.edatop.com/peixun/hfss/11.html ADS 学习培训课程套装该套装是迄今国内最全面 最权威的 ADS 培训教程, 共包含 10 门 ADS 学习培训课程 课程是由具有多年 ADS 使用经验的微波射频与通信系统设计领域资深专家讲解, 并多结合设计实例, 由浅入深 详细而又全面地讲解了 ADS 在微波射频电路设计 通信系统设计和电磁仿真设计方面的内容 能让您在最短的时间内学会使用 ADS, 迅速提升个人技术能力, 把 ADS 真正应用到实际研发工作中去, 成为 ADS 设计专家... 课程网址 : http://www.edatop.com/peixun/ads/13.html 我们的课程优势 : 成立于 2004 年,10 多年丰富的行业经验, 一直致力并专注于微波射频和天线设计工程师的培养, 更了解该行业对人才的要求 经验丰富的一线资深工程师讲授, 结合实际工程案例, 直观 实用 易学 联系我们 : 易迪拓培训官网 :http://www.edatop.com 微波 EDA 网 :http://www.mweda.com 官方淘宝店 :http://shop36920890.taobao.com 专注于微波 射频 天线设计人才的培养易迪拓培训官方网址 :http://www.edatop.com 淘宝网店 :http://shop36920890.taobao.com