CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INS

Transcription

1 ZH

2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The above warning is located on the top of the unit. IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. ( )

3 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does FCC INFORMATION (U.S.A.) not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B) COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif Telephone : Type of Equipment : Model Name : DME8i-C/DME8o-C/DME4io-C This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected. ADVARSEL! Lithiumbatteri Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren. VARNING Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. VAROITUS Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. (lithium caution) * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC) NEDERLAND / THE NETHERLANDS Dit apparaat bevat een lithium batterij voor geheugen back-up. This apparatus contains a lithium battery for memory back-up. Raadpleeg uw leverancier over de verwijdering van de batterij op het moment dat u het apparaat ann het einde van de levensduur afdankt of de volgende Yamaha Service Afdeiing: Yamaha Music Nederland Service Afdeiing Kanaalweg 18-G, 3526 KL UTRECHT Tel For the removal of the battery at the moment of the disposal at the end of the service life please consult your retailer or Yamaha Service Center as follows: Yamaha Music Nederland Service Center Address : Kanaalweg 18-G, 3526 KL UTRECHT Tel : Gooi de batterij niet weg, maar lever hem in als KCA. Do not throw away the battery. Instead, hand it in as small chemical waste. (lithium disposal) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colored GREEN or GREEN-and- YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.(3 wires)

4 * / YAMAHA YAMAHA YAMAHA YAMAHA / AC (5)-4 1/2 4 DME8i-C/DME8o-C/DME4io-C

5 AC 5 [ERROR] YAMAHA YAMAHA YAMAHA CobraNet Logic Ethernet Xerox (5)-4 2/2 DME8i-C/DME8o-C/DME4io-C 5

6 DME Satellite I/O /... 7 DME... 8 DME Satellite... 9 DME8i-C, DME8o-C, DME4io-C... 9 DME Satellite DME Satellite DME Designer CobraNet CobraNet CobraNet USB IP [NETWORK] I/O CobraNet [] [OUTPUT] [REMOTE] DME Satellite DME Satellite CobraNet CobraNet GPI [GPI] DME Satellite ICP CP4SW CP4SF CP1SF MIDI Data Format MIDI functions on the DME8i-C, DME8o-C, and DME4io-C MIDI Data Flow MIDI Setup MIDI Format MIDI / [NETWORK] (100Base-TX Ethernet, RJ-45) DME8i-C/DME8o-C/DME4io-C

7 DME8i-C/DME8o-C/DME4io-C DME8i-C/DME8o-C/DME4io-C, DME8i-C/DME8o-C/DME4io-C DME designer AC Euroblock (16P) x 1 Euroblock (3P) x 8 x 4 [AC IN] AC DME Satellite ICP1 CP4SW CP4SF CP1SF DME designer DME8i-C, DME8o-C, DME4io-C DME Satellite, DME64N DME24N DME Satellite DME DME designer DME Satellite / 1. [POWER] DME Satellite 2. [POWER], :, M7CL PM5D, DME, DME Satellite DME Satellite DME Designer Last Mem Resume DME Satellite DME DME Designer I/O DME8i-C/DME8o-C/DME4io-C 7

8 USB USB DME Satellite I/O DME DME DME DME m 3 / 5mmH 2 O DME DME 8 DME8i-C/DME8o-C/DME4io-C

9 DME Satellite DME8i-C DME8o-C DME4io-C DME8i-C 8 DME8o-C 8 DME4io-C 4 4 DME Satellite DME Satellite DME Designer CobraNet DME Satellite DME Satellite 1. USB DME Satellite USB-MIDI DME Designer DME Designer 3. DME Designer USB 22 CobraNet GPI DME Designer, DME Satellite DME Designer I/O DME8i-C/DME8o-C/DME4io-C 9

10 DME Satellite I/O DME Satellite DME DME,, DME DME DME Satellite DME Satellite DME Satellite DME ICP1 DME Designer 10 DME8i-C/DME8o-C/DME4io-C

11 USB USB DME Satellite ICP1, GPI x 8 Key in Hold DME Satellite Dark Stage Stage Stage 1 2 I/O DME8i-C/DME8o-C/DME4io-C 11

12 DME Satellite I/O DME Satellite DME Satellite : 1 DME Satellite / DME / [] [OUTPUT] CobraNet 2 DME DME DME DME DME Designer 3 [USB] MIDI [GPI] GPI [REMOTE] DME Satellite [USB] [NETWORK] CobraNet 16 DME DME DME DME [GPI] [REMOTE] [I NPUT]/[OUTPUT] / I/O DME DME MIDI / GPI GPI DME GPI / / AD8HR / MIDI / DME8i-C/DME8o-C/DME4io-C

13 SCENE HOME UTILITY LEVEL MUTE CANCEL ENTER USB USB USB USB USB DME Satellite DME Satellite A ICP1 B DME8i-C DME8i-C DME Satellite DME8i-C DME8i-C DME64N MY16-CII 3 C DME8o-C DME8o-C DME8o-C I/O DME8o-C CobraNet D DME8i-C DME4io-C CobraNet DME8o-C DME4io-C DME8i-C/DME8o-C/DME4io-C 13

14 DME Satellite I/O DME Satellite DME Designer DME Designer DME DME Designer DME DME USB DME DME DME Designer DME DME DME Designer DME DME 22 DME Designer DME Designer DME Designer DME Designer 14 DME8i-C/DME8o-C/DME4io-C

15 DME Satellite CobraNet CobraNet CobraNet Cirrus Logic 100 Mbs/ CobraNet CobraNet bit khz CobraNet CobraNet CobraNet CobraNet DME Satellite CobraNet DME Satellite ,279 CobraNet CobraNet DME Satellite 4 8 DME Designer 16bit, 48kHz 20bit, 48kHz 24bit, 48kHz 16bit, 96kHz 20bit, 96kHz 24bit, 96kHz 5.33ms * 4* 3** I/O 2.67ms * 4* 4* 1.33ms * 4* 4* * 96-kHz 48-kHz, ** DME8i-C/DME8o-C/DME4io-C 15

16 DME Satellite I/O DME Satellite CobraNet DME ,279 A CobraNet B C D A A D A D CobraNet A C CobraNet CobraNet A C CobraNet CobraNet B D CobraNet CobraNet B D CobraNet 16 DME8i-C/DME8o-C/DME4io-C

17 DME Satellite CobraNet CobraNet DME Designer DME Satellite [IN USE/CONDUCTOR] LED CobraNet CobraNet DME Satellite CobraNet CobraNet CobraNet I/O DME8i-C/DME8o-C/DME4io-C 17

18 DME Satellite I/O DME8i-C DME8o-C DME4io-C USB 1 USB 1 USB 1 [USB] DME USB USB USB MIDI DME Designer USB / DME Satellite DME Satellite DME Satellite [NETWORK] [USB] [NETWORK] 3 [MASTER] DME Designer DME Satellite USB, DME Satellite [USB] USB USB, : DME Satellite USB 6 18 DME8i-C/DME8o-C/DME4io-C

19 4 [ERROR] [] [ERROR] 5 [IN USE/CONDUCTOR] DME Satellite CobraNet DME Satellite 21, 21 6 [LINK/ACTIVITY] CobraNet 7 [] [] [OUTPUT] 3 dbfs 8 [] [] [OUTPUT] 40 dbfs DME I/O 9 [POWER] DME Satellite DME Designer Last Mem Resume DME DME8i-C/DME8o-C/DME4io-C 19

20 DME Satellite I/O 1 [AC IN] DME Satellite 2 DME Satellite 3 [NETWORK] 100Base-TX/10Base-T DME 24 [NETWORK] DME8i-C 2 DME8o-C DME4io-C RS-232C RS RS-232C RS-422 RS-232C RS-422 MAC ADD * XX XX XX XX XX XX * MAC ADD * XX XX XX XX XX XX * 2 8 ) MAC ADD * XX XX XX XX XX XX * 2 8 ) CAT5 STP Dip 6-bit dip [REMOTE] DME Satellite [REMOTE] RS-232C RS-422,, dip DME Satellite 32 RS-232C RS-422 RS-232C RS-422 RS-232C RS [REMOTE] 9 D-SUB AD824 AD8HR RS-232C/RS-422 AMX Crestron 29 [REMOTE] 9 9 DME Satellite dip bits RS-422 1bit 20 DME8i-C/DME8o-C/DME4io-C

21 6 CobraNet [PRIMARY]/[SECONDARY] DME Satellite CobraNet : [IN USE/CONDUCTOR] [LINK ACTIVITY] CobraNet CobraNet CAT5 STP 7 MAC CobraNet s MAC 8 [GPI] Euroblock GPI / 8 4 +V 5 IN 0V 5V OUT TTL L H 31 9 [] DME8i-C Euroblock 8 DME4io-C Euroblock 4 ) [OUTPUT] DME8o-C Euroblock 8 DME4io-C Euroblock 4 DME I/O DME8i-C/DME8o-C/DME4io-C 21

22 USB USB SCENE HOME UTILITY LEVEL MUTE CANCEL ENTER DME Satellite I/O USB DME Satellite IP DME [USB] USB USB USB-MIDI DME Designer DME Designer IP DME USB-MIDI DME Designer DME Designer USB-MIDI THRU OFF DME Designer IP 23 USB : (1) DME Designer IP DME Satellite (2) DME Designer DME (3) DME Satellite MIDI MIDI DME Designer DME Designer / MIDI DME Designer USB MIDI DME Satellite DME Satellite USB DME64N/24N USB DME Designer MIDI 22 DME8i-C/DME8o-C/DME4io-C

23 DME Designer IP ID IP DME Satellite IP octet 0, IP DME Satellite IP IP DME Designer DME Designer DME Designer CobraNet PM5D DME PM5D DME 2 DME IP I/O DME ID DME IP DME64N/24N DME DME DME8i-C/DME8o-C/DME4io-C 23

24 USB USB DME Satellite I/O [NETWORK] DME Satellite DME Satellite [NETWORK] DME-N DME-N DME Designer IP USB DME Satellite DME Designer IP 22 DME DME DME Designer DME Satellite IP : ID: 2 DME Satellite IP : USB DME Satellite Auto MDI/MDI-X 24 DME8i-C/DME8o-C/DME4io-C

25 USB USB USB SCENE HOME USB UTILITY LEVEL MUTE CANCEL ENTER SCENE HOME UTILITY LEVEL MUTE CANCEL ENTER DME Satellite IP : DME Satellite IP DME Satellite IP ID: 7 DME64N/24N IP ID: 7 IP 100Base-TX/10Base-T DME Satellite 100 CAT5 STP DME 100Base-TX I/O DME Satellite IP : DME Satellite IP ID: 5 DME64N/24N IP ID: 5 DME8i-C/DME8o-C/DME4io-C 25

26 USB USB SCENE HOME UTILITY LEVEL MUTE CANCEL ENTER USB USB SCENE HOME UTILITY LEVEL MUTE CANCEL ENTER DME Satellite I/O 1 2 DME Satellite IP DME64N/24N IP ID: 2 DME Satellite IP ID: 2 IP DME Satellite IP DME64N/24N IP ID: 3 DME Satellite IP ID: 3 26 DME8i-C/DME8o-C/DME4io-C

27 USB EXT. NETWORK CLOCK 96kHz MID 88.2kHz MASTER IN 48kHz kHz OUT SCENE NUMBER LOCK LINK CONDUCT ERROR NETWORK HUB AND BRIDGE I/O CobraNet DME CobraNet CobraNet 15 CobraNet DME MY16-C MY16-CII CobraNet DME Satellite DME Satellite ACU16-C MY16-CII 88 DME24N NHB32-C I/O MIDI DME MY16-C MY16-CII CobraNet MY DME8i-C/DME8o-C/DME4io-C 27

28 DME Satellite I/O I/O [] [OUTPUT] DME [] [OUTPUT] Euroblock (3P) DME Designer [] Euroblock Euroblock (3P) Euroblock 2 (16P) Euroblock [GPI] Euroblock Euroblock 30mm 7mm 3mm Euroblock 28 DME8i-C/DME8o-C/DME4io-C

29 USB [REMOTE] DME [REMOTE] AD8HR AD824, RS-232C AMX Crestron [REMOTE] MIDI DME Satellite DME Designer AD8HR AD824 8 AD8HR/AD824 AD8HR AD824 DME dip RS dip RS-422 AD8HR AD824 AD8R DME AD8HR AD824 DME Satellite DME Satellite RS-422 DME Satellite D-SUB 9-pin Interlink HA REMOTE 1 HA REMOTE 2 HA REMOTE 1 HA REMOTE 2 AD8HR AD8HR COM PC/RS-422 COM RS-422 COM PC/RS-422 COM RS-422 COM PC/RS-422 I/O AD824 AD824 AD824 DME Satellite RS-232C RS-422 DME AMX Crestron DME dip RS-232C RS dip AMX Crestron DME DME-N DME8i-C/DME8o-C/DME4io-C 29

30 USB USB DME Satellite I/O CobraNet CobraNet PM5D MY16-C MY16-CII CobraNet DME PM5D DME Satellite, PM5D DME PM5D/PM5D-RH MY16-CII PM5D CobraNet CobraNet Hub MY16-CII Hub Hub DME8i-C DME8i-C DME8o-C DME8o-C DME4io-C DME4io-C PM5D DME DME CobraNet PM5D DME PM5D DME 2 DME IP 30 DME8i-C/DME8o-C/DME4io-C

31 GPI [GPI] GPI GPI [GPI] CP4SW CP4SF CP1SF GPI DME 8 GPI 4 GPI +V 5 IN 0V 5V OUT TTL L H GPI DME Designer Euroblock GPI Euroblock Euroblock 28 CP4SW CP4SF CP1SF CP4SW/CP4SF/CP1SF DME Designer GPI DME Designer DME Satellite DME 10 DME Satellite DME Satellite LED GPI GPI GPI IN +V IN +V GND OUT GND 16mA OUT GND [GPI] 16mA I/O DME [GPI] DME [GPI] DME [GPI] Euroblock Euroblock Euroblock LED LED DME Designer [GPI] DME8i-C/DME8o-C/DME4io-C 31

32 DME Satellite I/O DME Satellite DME : DME: WAVE : WAVE DME Designer 1. DME dip [] [] [] 2. dip 20, RS-232C RS-422 RS-232C RS-422 DME: : DME dip 32 DME8i-C/DME8o-C/DME4io-C

33 ICP1 CP4SW CP1SF CP4SF DME ICP1 CP4SW CP1SF CP4SF GPI DME DME Designer ICP1 DME DME IP DME LCD F1 F6 [HOME] 24 DME Satellite I/O CP4SW CP4SF CP1SF [GPI] DME DME LED CONTROL PANEL CP4SW CONTROL PANEL CP4SF CONTROL PANEL CP1SF DME8i-C/DME8o-C/DME4io-C 33

34 DME Satellite I/O LED DME DME Designer MIDI MIDI MIDI MIDI DME64N/24N DME Designer 7 [POWER] ON 19 22, 24 USB-MIDI [NETWORK] DME-N MIDI Setup DME Designer CobraNet. CobraNet CobraNet DME Designer DME Designer Off DME Designer 96 khz 96 khz DME Designer MIDI DME Designer GPI MIDI MIDI DME Designer MIDI DME Designer DME Designer DME Designer MIDI DME Designer DME Designer MIDI 100Base-TX DME64N/24, DME Satellite 34 DME8i-C/DME8o-C/DME4io-C

35 MIDI Data Format 3. MIDI Setup 1. MIDI functions on the DME8i-C, DME8o-C, and DME4io-C 1.1 Scene Change Scene recall occurs according to the MIDI Program Change Table assignments when appropriate MIDI Bank Select MSB/LSB and Program Change messages are received by the DME8i-C/ DME8o-C/DME4io-C. When a scene recall operation is carried out via DME Designer, corresponding MIDI Bank Select MSB/LSB and Program Change messages are also transmitted by the DME8i-C/DME8o-C/ DME4io-C as specified by the MIDI Program Change Table assignments. Transmission does not occur while configurations are being switched. 1.2 Parameter Control MIDI Control Change and Parameter Change messages transmitted to the DME8i-C/DME8o-C/DME4io-C can be used to control parameters according to the MIDI Control Change Table and MIDI Parameter Change Table assignments. When a parameter is edited via DME Designer, corresponding MIDI Control Change and Parameter Change messages are also transmitted by the DME8i-C/DME8o-C/DME4io- C as specified by the MIDI Control Change Table and MIDI Parameter Change Table assignments. MIDI Program Change Table, MIDI Control Change Table, and MIDI Parameter Change Table assignments can be made via DME Designer. Refer to the DME Designer Owner s Manual for details. 2. MIDI Data Flow MIDI IN MIDI Rx CH SW1 SW2 SW3 SW4 SW5 SW6 Bank Select MSB/LSB Program Change (Scene Recall) Control Change (Parameter Edit) Parameter Change (Parameter Edit) Bank Select MSB/LSB Program Change (Echo Back) Control Change (Echo Back) Parameter Change (Echo Back) Specifies basic MIDI operation. Use DME Designer to make the setting. 3.1 Host Select Selects the input/output ports to be used for MIDI communication. 3.2 MIDI Tx Channel Specifies the MIDI transmit channel (1 ~ 16). 3.3 MIDI Rx Channel Specifies the MIDI receive channel (1 ~ 16). 3.4 MIDI Tx Switch Program Change Tx Switch: turns Bank Select MSB, LSB, and Program Change transmission on or off. Control Change Tx Switch: turns Control Change transmission on or off. Parameter Change Tx Switch: turns Parameter Change transmission on or off. 3.5 MIDI Rx Switch Program Change Rx Switch: turns Bank Select MSB, LSB, and Program Change reception on or off. Control Change Rx Switch: turns Control Change reception on or off. Parameter Change Rx Switch: turns Parameter Change reception on or off. 3.6 MIDI Omni Switch Program Change Omni Switch: turns the Bank Select MSB, LSB, and Program Change omni mode on or off. Control Change Omni Switch: turns the Control Change omni mode on or off. 3.7 MIDI Echo Back Switch Program Change Echo Back Switch: turns Bank Select MSB, LSB, and Program Change echo back on or off. Control Change Echo Back Switch: turns Control Change echo back on or off. Parameter Change Echo Back Switch: turns Parameter Change echo back on or off. I/O DME Satellite Bank Select MSB/LSB Program Change SW7 MIDI Tx CH MIDI OUT Control Change SW8 Parameter Change SW9 MIDI THRU SW1: Program Change Rx Switch [On/Off] SW2: Control Change Rx Switch [On/Off] SW3: Parameter Change Rx Switch [On/Off] SW4: Program Change Echo Back Switch [On/Off] SW5: Control Change Echo Back Switch [On/Off] SW6: Parameter Change Echo Back Switch [On/Off] SW7: Program Change Tx Switch [On/Off] SW8: Control Change Tx Switch [On/Off] SW9: Parameter Change MIDI Rx CH: MIDI Rx Channel (1-16) MIDI Tx CH: MIDI Tx Channel (1-16) DME8i-C/DME8o-C/DME4io-C 35

36 DME Satellite I/O 4. MIDI Format Number Format Notation Numbers ending with h are in hexadecimal format, while numbers ending with b are binary format. Characters A through F in hexadecimal numbers represent decimal values 10 through 15. Other lower-case characters (usually n or x ) can represent any number. MIDI Format Chart (Rx: receive, Tx: transmit} Channel Message System Real-time Message System Exclusive Message Command Rx/Tx Function Control Change (Bnh) Program Change (Cnn) TIMING CLOCK (F8h) ACTIVE SENSING (FEh) Parameter Change 4.1 Program Change (Cnh) Receive When the Program Change Rx Switch is on, Program Change messages are received on the MIDI channel specified by the MIDI Rx Channel parameter. If the Program Change Omni Switch is also on, however, Program Change messages will be received on all MIDI channels regardless of the MIDI Rx Channel setting. When a Program Change message is received, the scene assigned to the received program number in the MIDI Program Change Table is recalled. The effective Bank Select, Program Change range is as follows: Bank Select MSB: 0 Bank Select LSB: 0-7 Program Change No.: Rx/Tx Rx/Tx Editing the parameters Scene Recall Transmit When the Program Change Tx Switch is on and a scene is switched from DME Designer, the corresponding Program Change number will be transmitted as specified by the MIDI Program Change Table and MIDI Tx Channel settings. Transmission does not occur when a scene with a different configuration is selected. If multiple Program Change numbers are assigned to a single scene, the Bank Select MSB/LSB and Program Change number corresponding to the lowest number will be transmitted. Rx Rx Rx/Tx MIDI Clock Receive MIDI Cable Check Editing the parameters Bank Select MSB Status Bnh (1101nnnnb) Control Change Data 00h ( b) Control Change No. 0 (Bank Select MSB) Data nnh (0nnnnnnnb) Control Value (Bank Select MSB No.) Bank Select LSB Status Bnh (1101nnnnb) Control Change Data 20h ( b) Control Change No. 32 (Bank Select LSB) nnh (0nnnnnnnb) Control Value (Bank Select LSB No.) Program Change No. Status Cnh (1100nnnnb) Program Change Data nnh (0nnnnnnnb) Program Change No. (0-127) 4.2 Active Sensing (FEh) Receive MIDI communication will be initialized if no data is received within 300 ms after reception (Running Status, etc., will be cleared). Active Sensing Status FEh ( b) Active Sensing 4.3 Control Change (Bnh) Receive When the Control Change Rx Switch is on, Control Change messages are received on the MIDI channel specified by the MIDI Rx Channel parameter. If the Control Change Omni Switch is also on, however, Control Change messages will be received on all MIDI channels regardless of the MIDI Rx Channel setting. Control Change parameter resolution is 128 regardless of the effective range of the parameter. For finer settings use Parameter Change. Transmit When the Control Change Tx Switch is on and a parameter is edited via DME Designer, appropriate Control Change data will be transmitted as specified by the MIDI Control Change Table and MIDI Tx Channel settings. Refer to Supplementary Information 1 for cases in which multiple messages are assigned to a single parameter. Status Bnh (1011nnnnb) Control Change Data cch (0cccccccb) Control Change No. (1-31,33-95, ) vvh (0vvvvvvvb) Control Value (0-127) 4.4 Parameter Change (F0h - F7h) Receive When the Parameter Change Rx Switch is On, Parameter Change messages are received on the MIDI channel specified by the Device ID (Rx Ch) parameter. 36 DME8i-C/DME8o-C/DME4io-C

37 Transmit When the Parameter Change Tx Switch is On and a parameter is edited via DME Designer, appropriate Parameter Change data will be transmitted as specified by the MIDI Parameter Change Table and MIDI Tx Channel settings. Refer to Supplementary Information 1 for cases in which multiple messages are assigned to a single parameter. Refer to Supplementary Information 2 for information on setting Parameter Data values. Status F0h ( b) System Exclusive Message ID No. 43h ( b) Manufacturer s ID No.(YAMAHA) DEVICE ID. 1xh (0001xxxxb) Rx/Tx Channel (0-15) GROUP ID. 3Eh ( b) Digital Mixer MODEL ID. 10h ( b) Device Code (DME) Parameter aah (0aaaaaaab) Parameter Address High Address aah (0aaaaaaab) Parameter Address Low Parameter ddh (0dddddddb) data 0 Data Value ddh (0dddddddb) data 1 ddh (0dddddddb) data 2 ddh (0dddddddb) data 3 ddh (0dddddddb) data 4 EOX F7h ( b) End of Exclusive Supplementary Information 1 Messages Transmitted When Multiple Messages are Assigned to the Same Parameter The DME8i-C/DME8o-C/DME4io-C MIDI transmit messages are specified via the MIDI Control Change Table and MIDI Parameter Change Table. (The MIDI Control Change Table and MIDI Parameter Change Table can be set up via DME Designer.) Multiple messages can be assigned to a single parameter, but the DME8i-C/DME8o-C/DME4io-C will only transmit one of the assigned messages. The transmitted messages are as follows: If a Control Change message and a Parameter Change message are assigned to the same parameter the Control Change message will be transmitted. If multiple Control Change numbers are assigned to the same parameter the smallest Control Change number message will be transmitted. If multiple Parameter Change numbers are assigned to the same parameter the smallest Parameter Change number message will be transmitted. Supplementary Information 2 Setting the Parameter Change Message Parameter Data Values The Parameter change parameter values are expressed as 32-bit integers with or without parity. A parity bit (positive:0, negative:1) is added above the most significant value bit (bit 31). Fractional parameters will be converted according to the integer table. For integers with parity, negative numbers are expressed as the 2 s complement. I/O DME Satellite 0 0 parity bit31 bit30 bit29 bit28 bit27 bit26 bit25 bit24 bit23 bit22 bit21 data 0 data 1 data 2 data 3 data 4 Example: Decimal value 1000 Hexadecimal value 3E8h bit20 bit19 bit18 bit17 bit16 bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8 bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 Positive E data 0 = 00h data 1 = 00h data 2 = 00h data 3 = 07h data 4 = 68h Decimal value 1000 Hexadecimal value FFFFFC18h (2 s complement of 3E8h) Negative F F F F F C data 0 = 1Fh data 1 = 7Fh data 2 = 7Fh data 3 = 78h data 4 = 18h DME8i-C/DME8o-C/DME4io-C 37

38 DME Satellite I/O MIDI YAMAHA [Digital Mixing Engine Satellite] Date :16-FEB-2006 Model DME8i-C, DME8o-C, DME4io-C MIDI Implementation Chart Version : 1.0 Basic Channel Mode Function... Transmitted Recognized Remarks Note Number : True voice Velocity After Touch Pitch Bend Control Change Prog Change : True # System Exclusive Common Default Changed Default Messages Altered Note ON Note OFF Key's Ch's 0, ,33-95, : Song Pos. : Song Sel. : Tune System : Clock Real Time : Commands : All Sound Off Aux : Reset All Cntrls : Local ON/OFF Mes- : All Notes OFF sages: Active Sense : Reset Notes: ************** ************** *1 * *1 ************** * *1 * * *3 Memorized Bank Select Assignable Assignable *1 transmit/receive if program change switch is on. *2 transmit/receive if control change switch is on. *3 transmit/receive if parameter change switch is on. Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY Mode 2 : OMNI ON,MONO Mode 4 : OMNI OFF,MONO : Yes : No 38 DME8i-C/DME8o-C/DME4io-C

39 DME [ERROR] [] Initialize DME DME Delete All Data. DME Satellite DME Designer. DME Designer. DSP 48 khz 96 khz DME Designer 96kHz I/O IP DME USB IP DME Satellite DME Designer DME8i-C/DME8o-C/DME4io-C 39

40 DME Satellite I/O Sampling Frequency Maximum Voltage Gain 150 Ω DME8i-C : DME8o-C DME8o-C : DME8i-C <DME8i-C> <DME8o-C> <DME4io-C> <DME8i-C> fs=48khz@20hz Normal Rate:48kHz Double Rate:96kHz (±37ppm for conductor) (±50ppm for performer) Gain: 60dB, RL:600Ω, 64dB to OUTPUT Miscellaneous Power Consumption 40W Dimensions (HxDxW) Net Weight Temperature range Include Accessories 44x361x480 mm 4.4kg operating: 5 to 40 C storage: 20 to 60 C AC Power cord, CD-ROM (DME Designer application), Mini Euro plug(16p)x1, Euro plug(3p)x8, Owner s Manual, DME Designer Installation Guide, Rubber feetx4 RL 1 8 OUTPUT Ω 60dBu, GAIN 60dB db +10dBu, GAIN +10dB db RL 1 8 OUTPUT Ω +10dBu, GAIN +10dB db RL 1 4 OUTPUT Ω 60dBu, GAIN 60dB db +10dBu, GAIN +10dB db RL 1 8 OUTPUT Ω 60dBu, GAIN 60dB dbu +10dBu, GAIN +10dB dbu <DME8o-C> RL 1 8 OUTPUT Ω +10dBu, GAIN +10dB dbu 40 DME8i-C/DME8o-C/DME4io-C

41 <DME4io-C> RL 1 4 <DME8i-C/DME4io-C> OUTPUT Ω 60dBu, GAIN 60dB dbu +10dBu, GAIN +10dB dbu fs=48khz 96kHz RL <DME8i-C> 1-8 <DME4io-C> 1-4 OUTPUT Ω +4dB@20Hz 20kHz(fs=48kHz), 20Hz 40kHz (fs=96khz), 60dB +4dB@20Hz 20kHz(fs=48kHz), 20Hz 40kHz (fs=96khz), +10dB 0.1 % 0.05 % +22dB@1kHz, +10dB (fs=48khz) % +22dB@1kHz, +10dB (fs=96khz) % DME Satellite <DME8o-C> RL 1 8 OUTPUT Ω +4dB@20Hz 20kHz(fs=48kHz), 20Hz 40kHz (fs=96khz), +10dB 0.05 % +22dB@1kHz, +10dB (fs=48khz) % +22dB@1kHz, +10dB (fs=96khz) % & <DME8i-C> * 80kHz fs=48khz 96kHz, EIN= I/O RL 1 8 OUTPUT Ω Rs=150Ω, 60dB & 0dB Rs=150Ω, +10dB & 0dB 128 EIN 127 EIN dbu 64 dbu dbu <DME8o-C> RL 1 8 OUTPUT Ω Rs=150Ω, +10dB & 0dB dbu DME8i-C/DME8o-C/DME4io-C 41

42 DME Satellite I/O <DME4io-C> <DME8i-C/DME8o-C> <DME8i-C/DME8o-C> <DME4io-C> LED <DME8i-C> <DME8o-C> RL 1 4 OUTPUT Ω fs=48khz 96kHz N Rs=150Ω, 60dB & 0dB Rs=150Ω, +10dB & 0dB 128 EIN 127 EIN dbu 64 dbu dbu * 12.7kHz db/ 20kHz RL 1 8 OUTPUT Ω +10dB 106 db RL 1 4 OUTPUT Ω +10dB 106 db * ; db/ 20kHz N OUTPUT (N 1) (N+1) N = 1 8, +10dB 80 db N OUTPUT (N 1) (N+1) N = 1 4, +10dB 80 db * 80kHz METERING POINT 1 8 LED 3 dbfs LED 40 dbfs METERING POINT OUTPUT 1 8 LED 3 dbfs LED 40 dbfs 42 DME8i-C/DME8o-C/DME4io-C

43 <DME4io-C> METERING POINT 1 4 OUTPUT 1 4 / ANALOG CHARACTERISTICS LED : ON 3 dbfs LED : ON 40 dbfs PARAMETER CobraNET 5.33msec 6.12 msec CobraNET 2.67msec ANALOG ANALOG 3.45 msec CobraNET 1.33msec 2.12 msec <DME8i-C> CH 1 8 <DME4io-C> CH dB +10dB 3kΩ Ω Mics & 600Ω Lines 60dBu (0.775mV) +10dBu (2.45V) 40dBu (7.75mV) +30dBu (24.5V) *1., 0dBu Vrms *2. AD 24-bit, 128 (Fs=48kHz)/64 (Fs=96kHz) *3. +48V CH EUROBLOCK EUROBLOCK 5.08mm I/O DME Satellite ANALOG OUTPUT CHARACTERISTICS <DME8o-C> CH OUTPUT 1 8 <DME4io-C> CH OUTPUT Ω 600Ω +4dBu (1.23 V) +24dBu (12.28V) EUROBLOCK 5.08mm *1., 0dBu Vrms *2. DA 24-bit, 128 (Fs=48kHz)/64 (Fs=96kHz) DIGITAL & OUTPUT CHARACTERISTICS CobraNet CobraNet 16/20/24bit 100Base-TX RJ-45x2 *1 *1.PRIMARY,SECONDARY *2. 96kHz DME8i-C/DME8o-C/DME4io-C 43

44 DME Satellite I/O CONTROL I/O CHARACTERISTICS GPI [NETWORK] (100Base-TX Ethernet, RJ-45) IN 0 5V OUT TTL +V 5V EUROBLOCK *1 3.5mm IEEE Base-T/100Base-TX RJ-45 USB USB 1.1 B RS-232C/RS-422 RS-232C/RS-422 D-SUB 9P *1 8, 4 Imax/ = 16mA VH = 2.5V(min.), VL = 0.6V(max.) 1 TxD+ 2 TxD 3 RxD RxD DME8i-C/DME8o-C/DME4io-C

45 (4) DME Satellite I/O mm * YAMAHA YAMAHA DME8i-C/DME8o-C/DME4io-C 45

46 DME Satellite I/O A [AC IN] B C CobraNet CobraNet CobraNet [PRIMARY]/[SECONDARY] CP4SW CP4SF CP1SF DME: ( ) D Dip DME4io-C... 9 DME8i-C... 9 DME8o-C E [ERROR] Euroblock G [GPI] GPI DME Designer H... 7 I ICP [IN USE/CONDUCTOR] [] & [OUTPUT] []...21 J L [LINK/ACTIVITY]...19 M MAC...21 [MASTER]...18 MIDI...35 MIDI N [NETWORK]...20, 44 [NETWORK]...18 O octet...23 [OUTPUT]...21 P []...19 [POWER] Q...10 R [REMOTE]...20 RS-232C...20 RS S [] IP...23 DME / DME8i-C/DME8o-C/DME4io-C

47 U [USB] USB W X Y [REMOTE] Z I/O DME Satellite DME8i-C/DME8o-C/DME4io-C 47

48 DME Satellite I/O 48 DME8i-C/DME8o-C/DME4io-C

49 I/O DME Satellite DME8i-C/DME8o-C/DME4io-C 49

50 DME Satellite I/O 50 DME8i-C/DME8o-C/DME4io-C

51 YAMAHA NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif , U.S.A. Tel: CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S.A. de C.V. Calz. Javier Rojo Gómez #1149, Col. Guadalupe del Moral C.P , México, D.F., México Tel: BRAZIL Yamaha Musical do Brasil Ltda. Av. Reboucas 2636-Pinheiros CEP: Sao Paulo-SP. Brasil Tel: ARGENTINA Yamaha Music Latin America, S.A. Sucursal de Argentina Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, Panamá Tel: EUROPE THE UNITED KINGDOM Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: GERMANY Yamaha Music Central Europe GmbH Siemensstraße 22-34, Rellingen, Germany Tel: SWITZERLAND/LIECHTENSTEIN Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: AUSTRIA Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: CZECH REPUBLIC/SLOVAKIA/ HUNGARY/SLOVENIA Yamaha Music Central Europe GmbH, Branch Austria, CEE Department Schleiergasse 20, A-1100 Wien, Austria Tel: POLAND Yamaha Music Central Europe GmbH Sp.z. o.o. Oddzial w Polsce ul. 17 Stycznia 56, PL Warszawa, Poland Tel: THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: FRANCE Yamaha Musique France BP Marne-la-Vallée Cedex 2, France Tel: ITALY Yamaha Musica Italia S.P.A. Combo Division Viale Italia 88, Lainate (Milano), Italy Tel: SPAIN/PORTUGAL Yamaha-Hazen Música, S.A. Ctra. de la Coruna km. 17, 200, Las Rozas (Madrid), Spain Tel: SWEDEN Yamaha Scandinavia AB J. A. Wettergrens Gata 1 Box S Göteborg, Sweden Tel: DENMARK YS Copenhagen Liaison Office Generatorvej 6A DK-2730 Herlev, Denmark Tel: NORWAY Norsk filial av Yamaha Scandinavia AB Grini Næringspark 1 N-1345 Østerås, Norway Tel: OTHER EUROPEAN COUNTRIES Yamaha Music Central Europe GmbH Siemensstraße 22-34, Rellingen, Germany Tel: AFRICA Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan Tel: MIDDLE EAST TURKEY/CYPRUS Yamaha Music Central Europe GmbH Siemensstraße 22-34, Rellingen, Germany Tel: OTHER COUNTRIES Yamaha Music Gulf FZE LB Jebel Ali Freezone P.O.Box 17328, Dubai, U.A.E. Tel: ASIA THE PEOPLE S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 25/F., United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: KOREA Yamaha Music Korea Ltd. Tong-Yang Securities Bldg. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: MALAYSIA Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: SINGAPORE Yamaha Music Asia Pte., Ltd. #03-11 A-Z Building 140 Paya Lebor Road, Singapore Tel: TAIWAN Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: THAILAND Siam Music Yamaha Co., Ltd. 891/1 Siam Motors Building, floor Rama 1 road, Wangmai, Pathumwan Bangkok 10330, Thailand Tel: OTHER ASIAN COUNTRIES Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan Tel: OCEANIA AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan Tel: PA13 HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division Nakazawa-cho 10-1, Hamamatsu, Japan Tel:

52 Yamaha Pro Audio global web site: Yamaha Manual Library U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation 2006 Yamaha Corporation 606YI-A0