SPS12500B Technical data1 sheet

Size: px

Start display at page:

Download "SPS12500B Technical data1 sheet"

孜规笛双
5 years ago
Views:

1 三一帕尔菲格技术图表 Technical Data SPS8000 Serial number: DB-030 Version:07/2016 SANY PALFINGER SPV EQUIPMENT CO.,LTD Rudong Development Zone, Nantong, Jiangsu, China Service Hotline:

2 SPS8000 1/10 Pages Version: 2015/11 V02/ 基本参数额定起重力矩额定吊载质量最大工作幅度吊钩最大倍率回转角度变幅角度范围最大起升高度 ( 以支腿全伸地面为基准 ) Basic data SPS8000A SPS8000B Rated lifting moment 8 mt 8 mt Rated lifting capacity Max. outreach 3200 kg(2.5 m) 3200 kg(2.3 m) 7.8 m 10.2 m Max. lines of the hook 4 4 Slewing angle (continuous) 全回转全回转 Boom raising angle 0~75 0~75 Max. lifting height(the measurement from the ground after the outriggers fully extended) 9.8 m 12.5 m 起重臂基本臂长起重臂全伸臂长起重臂节数支腿跨距 ( 全伸 ) 推荐系统流量系统额定压力油箱容积 Length of the basic boom Length of fully extended boom Boom sections Outrigger span(fully extended) Recommended volume for the system Operating pressure Oil tank capacity 3.4 m 3.5 m 8.0 m 10.4 m (m) 4.4 (m) 35 L/min 35 L/min 23/25 Mpa 23/25 Mpa 100 L 100 L 备注以上速度是在液压油温 45~55, 无负荷, 推荐流量情况下的最大值 The mentioned speed is the maximum value when the crane is operated without load and under the recommended volumn which with oil temperature 45 ~

3 V02/ /6 Pages Version: 2015/11 SPS8000 吊机重量地面操作 SPS8000A 地面操作 SPS8000B Crane weight Floor Control SPS8000A Floor Control SPS8000B 1200 kg 1300 kg 备注吊机重量不包含改制包等重量 The weight of the mounting kit was not included in the mentioned crane weight. 2

4 SPS8000 Dimensions 尺寸 1/10 Pages Version: 2015/11 V02/ SPS8000B Crane 吊机 3

5 V02/ Dimensions 尺寸 2/6 Pages Version: 2015/11 SPS8000 SPS8000A Crane 吊机 4

6 SPS8000 LOADING CHART 载荷表 1/10 Pages Version: 2015/11 V02/ SPS8000A 臂长 Boom length 工作半径 Working radius 3.4 m 5.7 m 8.0 m 2m m m m m m m m m m m m 7.8m Recommended rope line 备注以上重量参数为千克, 距离参数为米吊钩吊索钢丝绳或其他吊载装置需要计入到额定载荷内, 必须从额定载荷内剔除达到以上额定载荷的条件为吊机按要求支撑 ( 见操作手册 ), 额定载荷将不能超过吊机整车倾翻载荷的 85% Weights are in (kg), distances are in (m). The weights of hook, slings and used load handling devices must be considered parts of the load and have to be deducted from the above capactities. The above rated lifting capacities are maximum allowable loads with crane properly supported (refer to operator manual). Lifting capacities must not exceed 85% of tipping load. 5

7 V02/ LOADING CHART 载荷表 2/6 Pages Version: 2015/11 SPS8000 SPS8000B 臂长 Boom length 工作半径 Working radius 3.5 m 5.8 m 8.1 m 10.4 m 2 m m m m m m m m m m 6.5 m 7 m 7.5 m 8 m 8.5 m 9 m 9.5 m 10 m 10.2 m Recommended rope line 备注以上重量参数为千克, 距离参数为米吊钩吊索钢丝绳或其他吊载装置需要计入到额定载荷内, 必须从额定载荷内剔除达到以上额定载荷的条件为吊机按要求支撑 ( 见操作手册 ), 额定载荷将不能超过吊机整车倾翻载荷的 85% Weights are in (kg), distances are in (m). The weights of hook, slings and used load handling devices must be considered parts of the load and have to be deducted from the above capactities. The above rated lifting capacities are maximum allowable loads with crane properly supported (refer to operator manual). Lifting capacities must not exceed 85% of tipping load. 6

8 SPS8000 1/10 Pages Version: 2015/11 V01/ SPS8000A 起升高度 Lifting Height (m) Rated Load : Kg 工作幅度 (m) Working Outreach (m) 7 8 备注以上作业高度与臂架幅度为吊臂处于不加载荷状态, 实际吊臂加载后作业高度与幅度将发生变化, 额定载荷将不能超过吊机整车倾翻载荷的 85% The above lifting heights and boom angles are based on a straight (unladen) boom. Allowance should be made for boom deflection under laden conditions. Lifting capacities must not exceed 85% of tipping load. 7

9 V01/ /6 Pages Version: 2015/11 SPS8000 SPS8000B 起升高度 Lifting Height (m) 14 Rated Load : Kg 工作幅度 (m) Working Outreach (m) 备注以上作业高度与臂架幅度为吊臂处于不加载荷状态, 实际吊臂加载后作业高度与幅度将发生变化, 额定载荷将不能超过吊机整车倾翻载荷的 85% The above lifting heights and boom angles are based on a straight (unladen) boom. Allowance should be made for boom deflection under laden conditions. Lifting capacities must not exceed 85% of tipping load. 8

10 SPS8000 安装尺寸 1/10 Pages Version: 2015/11 V01/ SPS8000A/SPS8000B Intallation dimension 9

untitled

untitled () PRELIMINARY CONTENTS Page Key 3 Dimensions and Specifications Crane Dimensions 4 Specifications 5 Range Diagram 6 Load Charts 7 Technical Descriptions Lifting Capacity 8 Boom and Components 8 Jib 8