QLOGIC QLA22OO 使用手冊

Size: px

Start display at page:

Download "QLOGIC QLA22OO 使用手冊"

寮干钭
5 years ago
Views:

1 QLOGIC QLA23XX HBA

3 ? FAST!UTIL CONFIGURATION SETTINGS SCAN FIBRE CHANNEL DEVICES FIBRE DISK UTILITY SELECT HOST ADAPTER QLA23XX

4 1.WINDOWS2000 OS 25 2.WINDOWS2000 OS 26 3.REDHAT LINUX 27 4.SOLARIS SPARC 32 4 QLOGIC QLA22OO

5 1. QlogicSANblade (Fibre Channel) SANblade 23xx Qlogic ISP23xxA ISP23xxA RISC (FPM,Fibre ProtocolModule) (SFP,Small Form Facter Plug) SANblade23xx PLDA FLA 2.? (Fibre Channel) SCSI-3 Fibre Channel Protocol (SCSI-FCP) (200MB/s), 400MB/s QLA23xx HBA (300m ) QLA2340/2340L QLA2342/2342L and QLA2344 HBAs 64-bit, 133-MHz PCI-X HBA QLA2310F/2310FL HBAs 64-bit, 66-MHz PCI-X HBA 3. PCI-X1.0 PCI2.2 (FC-PH-3,Fibre Channel Physical and Signaling Interface) QLOGIC QLA22OO 5

6 (FC-AL-2, Fibre Channel Arbitrated Loop) (Bus Master DMA) BIOS QLA2342/2342L 2 QLA Fibre Channel SCSI Internet Protocol (Point-to-Point Fabric connection, F-port Fabric Login) FC-PLDA (Fibre Channel Private Loop Direct Attach) FC-FLA (Fibre Channel Fabric Loop Attachment) 6 QLOGIC QLA22OO

7 1. QLA23xx!! QLA23xx (ESD) QLA23xx ( Phillips #1 ) 2., LC Qlogic QLA23xx NVRAM QLOGIC QLA22OO 7

8 8 QLOGIC QLA22OO

9 3. 1. QLA23xx QLA23xx PCI/PCI-X BIOS QLOGIC QLA22OO 9

10 4. PCI/PCI-X QLA23xx PCI-X (PCI-X Bus Master) IRQ PCI-X IRQ Interrupt Line A Master Slave 2 PCI-X QLA23xx Master ( Master PCI-X QLA23xx PCI-X-X ) QLA23xx 64-bit 32-bit PCI-X 32-bit PCI-X PCI/PCI-X PCI/PCI-X QLA23xx 5. QLA23xx PCI/PCI-X QLA23xx 6. QLA23xx PCI/PCI-X PCI/PCI-X PCI/PCI-X 7. QLA23xx PCI/PCI-X PCI/PCI-X Fibre Channel 11. BIOS Fibre Channel QLogic Corporation QLA23xx PCI-X Fibre Channel ROM BIOS Version X.XX Copyright (C) QLogic Corporation 2000 All rights reserved. Press <Ctrl-Q> for Fast!UTIL 10 QLOGIC QLA22OO

11 BIOS for Adapter 0 is disabled ROM BIOS not installed QLogic Corporation QLA23xx PCI-X Fibre Channel ROM BIOS Version X.XX Copyright (C) QLogic Corporation 2000 All rights reserved. Press <Ctrl-Q> for Fast!UTIL ISP23xx Firmware Version X.XX QLogic adapter using IRQ number X Device Device Adapter Loop Loop Vendor Product Product Number Type Number ID LUN ID ID Revision 81 Disk SEAGATE ST SUN SPARC BIOS QLA23xx BIOS A IDE QLA23xx BIOS (FC ID) BIOS None Not Installed QLA23xx BIOS QLOGIC QLA22OO 11

12 1. 2. QLA23xx QLA23xx QLA23xx BIOS QLA23xx PCI-X Fast!UTIL 12 QLOGIC QLA22OO

13 3. PCI/PCI-X 64-bit PCI/PCI-X ( MHz) QLOGIC QLA22OO 13

14 Fast!UTIL Fast!UTIL Sun SPARC 1. QLA23xx QLA23xx BIOS [ALT]+ Q Fast!UTIL QLA23xx( Fast!UTIL ) QLA23xx Fast!UTIL Fast!UTIL QLA23xx Fast!UTIL 2. Configuration Settings QLA23xx Host Adapter Settings Fast!UTIL Configuration Settings Host Adapter Settings 14 QLOGIC QLA22OO

15 (Item) (Selection) (Default) Host Adapter BIOS Enabled/Disabled Disabled Frame Size 512, 1024, Loop Reset Delay 0-60 seconds 5 seconds Adapter Hard Loop ID Enabled/Disabled Disabled Hard Loop ID Spin Up Delay Enabled/Disabled Disabled Host Adapter BIOS (Disabled) QLA23xx ROM BIOS (Upper Memory) FC (Enabled) Frame Size QLA23xx (Frame) 2048 F-Port (Point-to-point ) 2048 Loop Reset Delay QLA23xx 5 Adapter Hard Loop ID QLA23xx QLOGIC QLA22OO 15

16 (Loop ID) Hard Loop ID QLA23xx (Loop ID) 0 Spin Up Delay Enable BIOS 5 Disable Selectable Boot Settings Fast!UTIL Configuration Settings Selectable Boot Settings BIOS BIOS Boot ID Boot LUN Restore Default Setting Configuration Settings Restore Default Setting 16 QLOGIC QLA22OO

17 Raw NVRAM Data 16 NVRAM Advanced Adapter Setting Fast!UTIL Configuration Settings Advanced Adapter Setting Execution Throttle >4GByte Addressing Enabled or Disabled Disabled Luns per Target Enable LIP Reset Yes or No No Enable LIP Full Login Yes or No Yes Enable Target Reset Yes or No Yes Login Retry Count Port Down Retry Count IOCB Allocation buffers 256 Extended Error Logging Enabled or Disabled Disabled Execution Throttle QLOGIC QLA22OO 17

18 16 >4GByte Addressing 4Gbyte LUNs per Target (Target Device) (LUN) Enable LIP Reset (Bus Reset routine) QLA23xx (LIP, Loop Initialization Process) (LIP) (Reset) Target (Full login) Enable LIP Full Login QLA23xx (LIP) (Re-login) Enable Target Reset SCSI Bus Reset Target Reset 18 QLOGIC QLA22OO

19 Login Retry Count QLA23xx 8 Port Down Retry Count QLA23xx 8 IOCB Allocation (Buffer) 256 Extended Error Logging Windows NT Windows NT Event Viewer Extended Firmware Settings Fast!UTIL Configuration Settings Extended Firmware Settings RIO Operation Mode 0, 1, 2, 3, 4 0 Connection Options 0, 1, 2, 3 2 Fibre Channel Tape Support Enabled/Disabled Enabled QLOGIC QLA22OO 19

20 Support Interrupt Delay Timer Data Rate RIO Operation Mode (RIO, Reduced Interrupt Operation Mode) RIO VI Connection Options (Loop) (Point-to-point) QLOGIC QLA22OO

21 Fibre Channel Tape Support (FCP-2 recovery) Interrupt Delay Timer QLA23xx DMA ( 100-microsecond ) 0 Data Rate 1 HBA 2Gbps 2 HBA QLA2310F 0 1Gbps 3. Scan Fibre Channel Devices (loop ID) QLA23xx 4. Fibre Disk Utility (Loop ID) QLOGIC QLA22OO 21

22 5. Select Host Adapter QLA23xx QLA23xx 22 QLOGIC QLA22OO

23 % 90% 5% 95% 2 QLA23xx PCI-X 1.0 PCI 2.2 PCI/PCI-X 3.3V 5.0V 32-bit 33 MHz PCI: 132 MB/s 32-bit 66 MHz PCI/PCI-X: 264 MB/s PCI/PCI-X 64-bit 33 MHz PCI: 528 MB/s 64-bit 66 MHz PCI/PCI-X: 528 MB/s 64-bit 133MHz PCI-X: 1064 MB/s 400 MB/s ISP23xx RISC (FPM, Fibre Protocol Module) PCI/PCI-X DMA QLOGIC QLA22OO 23

24 64-bit, 66-MHz bus master DMA data transfers to 528MB/s 64-bit, 133-MHz bus master DMA data transfers to 1064MB/s RAM 256KB SRAM 128KB ( 2 BIOS 64KB ) 256 byte ( ) 5 DMA (2 1 DMA DMA ) 4KB 6KB QLA2310F/2310FL: LC Non-OFC SFP 17.78cm x 10.67cm (7.0" x 4.2") (QLA2310/2310F,2344) 16.93cm x 5.15cm (6.7" x 2.0") (QLA2310FL 2340/2340L,2342/2342L) QLOGIC QLA22OO

25 1 Windows 2000 OS 1. Qlogic HBA Qlogic HBA Internet 2. OS Fibre Qlogic HBA 3. Fibre CD-ROM 4. a: W2K oemsetup.inf QLOGIC QLA22OO 25

26 qla23xx.sys qla23xx.dll C: WINNT System32 7. Qlogic23xx HBA SCSI RAID HBA Qlogic QLA23xx PCI Fibre Channel Adapter 8. HBA 2 Windows OS Qlogic HBA 1. SCSI RAID Qlogic QLA23xx PCI Fibre Channel Adapter SCSI CD-ROM 26 QLOGIC QLA22OO

27 4. a: W2K oemsetup.inf qla23xx.sys qlsdm.dll C: WINNT System32 7. Qlogic23xx HBA HBA SCSI RAID Qlogic QLA23xx PCI Fibre Channel Adapter 8. 3 RedHat Linux RedHat7.3 QLA2310F LUN (1) Qlogic HBA Qlogic QLA23xx RedHat qla23xxsrc-vx.yy.tgz QLOGIC QLA22OO 27

28 (2) RedHat I. RPMs # rpm -qa grep kernel CDROM # rpm -i kernel-source* # rpm -i kernel-headers* # mkdir /usr/src/linux/drivers/scsi/qla23xx/ # cd /usr/src/linux/drivers/scsi/qla23xx/ # mcopy a:*.tgz. (. ) ( CDROM ) # tar -xvzf *.tgz # rm -f makefile # cp -f Makefile.kernel Makefile SCSI Makefile # cd /usr/src/linux/drivers/scsi # vi Makefile a. subdir-$(config_scsi_aic73xx) += aic73xx b. subdir-$(config_scsi_qlogic_qla2xxx) += qla2xxx ifeq ($(CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2200),y) endif SUB_DIRS += qla2xxx MOD_IN_SUB_DIRS += qla2xxx else ifeq ($(CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2200),m) MOD_IN_SUB_DIRS += qla2xxx endif ifeq ($(CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2300),y) SUB_DIRS += qla2xxx MOD_IN_SUB_DIRS += qla2xxx else ifeq ($(CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2300),m) MOD_IN_SUB_DIRS += qla2xxx 28 QLOGIC QLA22OO

29 endif endif c. obj-$(config_scsi_qlogic_qla2100) +=qla2x00.o d. obj-$(config_scsi_qlogic_qla23xx_qla23xx) += qla2xxx/qla23xx.o e. Makefile qla23xx/qla23xx.o: cd qla2xxx; make qla23xx.o kernel/scsi Config.in # cd /usr/src/linux/drivers/scsi # vi Config.in dep_tristate Qlogic QLA 2100 FC SCSI support CONFIG_SCSI_QLOGIC_QLA2100 $CONFIG_SCSI dep_tristate Qlogic QLA 23xx FC SCSI support CONFIG_SCSI_QLOGIC_QLA23xx $CONFIG_SCSI source drivers/scsi/qla23xx/config.in Qlogic FC HBA # cd /usr/src/linux/drivers/addon/qla23xx # mv qla23xx.o qla23xx_rh.o # mv qla2300.o qla2300_rh.o # cd lib/modules/<kernel_ver>/drivers/addon/qla23xx # mv qla23xx.o qla23xx_rh.o # mv qla2300.o qla2300_rh.o Qlogic # cd /usr/src/linux # make menuconfig Main Menu SCSI Support ENTER SCSI Support Menu SCSI Generic Support SCSI low-level drivers ENTER SCSI low-level drivers Menu Qlogic 23xx v6 FC SCSI support ENTER Qlogic QLA 23xx v6 FC SCSI support Main Menu. Do you wish to save your new kernel configuration? Yes QLOGIC QLA22OO 29

30 # make dep bzimage modules modules_install II. A) HBA CDROM # cd /mnt/cdrom/redhat/rpms # rpm -iv kernel-headers*.rpm # rpm -iv kernel-source*.rpm # cd /usr/src/linux-2.4 # make menuconfig Main Menu SCSI Support ENTER SCSI Support Menu SCSI Generic Support Main Menu. Do you wish to save your new kernel configuration? Yes # make dep # mkdir qla2x00 # cd qla2x00 # mcopy a:*.tgz. (. ) # tar -xvzf *.tgz # make all OSVER=;linux-2.4 B) HBA CDROM # cd /mnt/cdrom/redhat/rpms # rpm -iv kernel-headers*.rpm # rpm -iv kernel-source*.rpm # cd /usr/src/linux-2.4 # make menuconfig Main Menu SCSI Support ENTER SCSI Support Menu SCSI Generic Support Main Menu Processor type and features ENTER Symmetric multiprocessor SPACEBAR 30 QLOGIC QLA22OO

31 Processor type and features Main Menu. Do you wish to save your new kernel configuration? Yes # make dep # mkdir qla2x00 # cd qla2x00 # mcopy a:*.tgz. (. ) # tar -xvzf *.tgz # make all SMP=1 OSVER=linux-2.4 C) # insmod qla23xx.o D) LUNs boot boot: linux max_scsi_luns=128 SCSI Mid-Layer /etc/modules.conf option scsi_mod max_scsi_luns=128 SCSI Mid-Layer LILO l/etc/lilo.conf append="max_scsi_luns=128" #lilo #reboot GRUB /etc/grub.conf kernel /vmlinux ro root=/dev/hda2 max_scsi_luns=128 reboot 统 #vi /proc/scsi/scsi #echo scsi add-single-device >/proc/scsi/scsi SCSI_ID 0 Target Channel 1 LUN LUN echo vi ID QLOGIC QLA22OO 31

32 4 Solaris SPARC SUN SPARC Solaris OS Qlogic QLA23xxHBA Qlogic HBA Qlogic ( qla23xx_pkg.z 3. uncompress./qla23xx_pkg.z 4. pkgadd -d./qla23xx_pkg 5. The following packages are available: 1 QLA23xx-1 QLogic QLA23xx driver (sparc) Solaris 2.6, Rev=X.XX 2 QLA23xx-2 QLogic QLA23xx driver (sparc) Solaris 7, Rev=X.XX 3 QLA23xx-3 QLogic QLA23xx driver (sparc) Solaris 8-9, Rev=X.XX 4 QSLDMLIB QLogic SDM Library (sparc) Solaris 7-8-9, Rev=X.XX 5 QLSDMLIB6 QLogic SDM Library (sparc) Solaris 2.6, Rev=X.XX 6 scfx2-6 QLogic SANblade Control FX (HBA Configuration Utility (sparc) Solaris 2.6, 7, Rev=X.XX 7 scfx2-8 QLogic SANblade Control FX (HBA Configuration Select package(s) you wish to process Utility (sparc) Solaris 8-9, Rev=X.XX (or all to process all packages). (default: all)[?,??,q]: 6. ENTER 7. Processing package instance <QLA23xx-2> from </tmpdir/qla23xx_pkg> QLogic QLA23xx driver (sparc) Solaris 7, Rev=X.XX Copyright (c) , by QLogic Corporation. All rights reserved. Where do you want the driver object installed (default=/kernel/drv): 8. Y 32 QLOGIC QLA22OO

33 ##Executing checkinstll script. Using </> as the package base directory. ## Processing package information. ## Processing system information. ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. ## Checking for setuid/setgid programs. This package contains scripts which will be executed with super-user permission during the process of installing this package. Do you want to continue with the installation of <QLA23xx-2> [y,n,?] 9. Installing QLogic QLA23xx driver as <QLA23xx-2> ## Installing part 1 of 1. /kernel/drv/qla23xx /kernel/drv/qla23xx.conf /kernel/drv/sparcv9/qla23xx [ verifying class <none> ] ## Executing postinstall script. Reboot client to install driver. Installation of <QLA23xx-2> was successful. 10. Solaris LUN HBA 32 luns /kernel/drv/qla23xx.conf hba0-loop-down-timeout=60 hba0-link-down-error=1 hba0-loop-down-timeout=60 hba0-persistent-binding-configuration=0 hba0-fast-error-reporting=0 hba0-adapter-node-name="200000e08b073190"; hba0-adapter-port-name="210000e08b073190"; hba0-scsi-target-id-0-fibre-channel-node-name="200600a0b80cc7d3"; hba0-scsi-target-id-0-fibre-channel-port-name="200700a0b80cc7d4"; LUN hba ID Target ID Node_WWN Port_WWN dmseg more QLOGIC QLA22OO 33

QLOGIC QLA22OO 使用手冊

QLOGIC QLA22OO 使用手冊 QLOGIC QLA2200 HBA 1.0 1999 2002 ...5 1....5 2.?...5 3....5...7 1....7 2....7 3....100 4....111...144 1....144 2....144 3....155 4....155 FAST!UTIL...166 1....166 2. CONFIGURATION SETTINGS...166 3. SCAN