QLOGIC QLA22OO 使用手冊

Size: px

Start display at page:

Download "QLOGIC QLA22OO 使用手冊"

肇题仝
5 years ago
Views:

1 QLOGIC QLA2200 HBA

3 ? FAST!UTIL CONFIGURATION SETTINGS SCAN FIBRE CHANNEL DEVICES FIBRE DISK UTILITY SELECT HOST ADAPTER QLA22XX...277

4 29 WINDOWS2000 OS 29 WINDOWS2000 OS 30 REDHAT LINUX 31 SOLARIS SPARC 35 4 QLOGIC QLA22OO

5 1. QlogicSANblade (Fibre Channel) SANblade 2200 Qlogic ISP2200A ISP2200A (FPM,Fibre ProtocolModule) (Gigabit transceiver) PCI SANblade2200 PLDA FLA 2.? (Fibre Channel) SCSI-3 Fibre Channel Protocol (SCSI-FCP) (100MB/s) QLA2200 QLA2200L (30m ) QLA2200F QLA2202F QLA2204F QLA2212F (500m ) QLA2200G 30km 3. PCI2.2 (FC-PH-3,Fibre Channel Physical and Signaling Interface) (FC-AL-2, Fibre Channel Arbitrated Loop) QLOGIC QLA22OO 5

6 (Bus Master DMA) BIOS QLA2202F 2 QLA2204F 4 QLA2212F 2 Fibre Channel SCSI Internet Protocol (Point-to-Point Fabric connection, F-port Fabric Login) FC-PLDA (Fibre Channel Private Loop Direct Attach) FC-FLA (Fibre Channel Fabric Loop Attachment) 6 QLOGIC QLA22OO

7 1. QLA22xx!! QLA22xx (ESD) QLA22xx ( Phillips #1 ) 2. QLA2200/2200L HSSDC (High-speed serial data connector) QLA2200F/2202F/2212F SC QLA2212F ) PTP to HDDSC-AMP X PTP to DB-9 plug-amp X PTP to DB-9 receptacle-amp X 3. QLA2204F LC 4. QLA2200G GBIC Qlogic QLOGIC QLA22OO 7

8 QLA22xx NVRAM 8 QLOGIC QLA22OO

9 QLOGIC QLA22OO 9

10 3. HSSDC pin 7 +5V (MIA,Media interface adapter) MIA 10 QLOGIC QLA22OO

11 4. 1. QLA22xx QLA22xx PCI BIOS PCI QLA22xx PCI (PCI Bus Master) IRQ PCI IRQ Interrupt Line A Master Slave 2 PCI QLA22xx Master ( Master PCI QLA22xx PCI ) QLA22xx 64-bit 32-bit PCI 32-bit PCI PCI PCI QLA22xx 5. QLA22xx PCI QLA22xx 6. QLA22xx PCI PCI PCI 7. QLA22xx PCI QLOGIC QLA22OO 11

12 PCI 8. GBIC J1 (QLA2200/2200F/2202F/2200L) J1 and J2 (QLA2202F) J1 through J4 (QLA2204F) J6 (QLA2200G) Fibre Channel 11. BIOS Fibre Channel QLogic Corporation QLA22xx PCI Fibre Channel ROM BIOS Version X.XX Copyright (C) QLogic Corporation 2000 All rights reserved. Press <Alt-Q> for Fast!UTIL BIOS for Adapter 0 is disabled ROM BIOS not installed QLogic Corporation QLA22xx PCI Fibre Channel ROM BIOS Version X.XX Copyright (C) QLogic Corporation 2000 All rights reserved. Press <Alt-Q> for Fast!UTIL ISP2xxx Firmware Version X.XX QLogic adapter using IRQ number X Device Device Adapter Loop Loop Vendor Product Product Number Type Number ID LUN ID ID Revision 81 Disk SEAGATE ST SUN SPARC BIOS QLA22xx BIOS A 12 QLOGIC QLA22OO

13 IDE QLA22xx BIOS (FC ID) BIOS None Not Installed QLA22xx BIOS QLOGIC QLA22OO 13

14 1. 2. QLA22xx QLA22xx QLA22xx BIOS QLA22xx PCI GBIC QLA2200G Fast!UTIL 14 QLOGIC QLA22OO

15 3. PCI 32-bit 64-bit (33 66 MHz) QLOGIC QLA22OO 15

16 Fast!UTIL Fast!UTIL Sun SPARC 1. QLA22xx QLA22xx BIOS [ALT]+ Q Fast!UTIL QLA22xx( Fast!UTIL ) QLA22xx Fast!UTIL Fast!UTIL QLA22xx Fast!UTIL 2. Configuration Settings QLA22xx Host Adapter Settings Fast!UTIL Configuration Settings Host Adapter Settings 16 QLOGIC QLA22OO

17 (Item) (Selection) (Default) Host Adapter BIOS Enabled/Disabled Disabled Frame Size 512, 1024, Loop Reset Delay 0-15 seconds 5 seconds Adapter Hard Loop ID Enabled/Disabled Disabled Hard Loop ID Host Adapter BIOS (Disabled) QLA22xx ROM BIOS (Upper Memory) FC (Enabled) Frame Size QLA22xx (Frame) 1024 F-Port (Point-to-point ) 2048 Loop Reset Delay QLA22xx 5 Adapter Hard Loop ID QLA22xx (Loop ID) QLOGIC QLA22OO 17

18 Hard Loop ID QLA22xx (Loop ID) 0 Selectable Boot Settings Fast!UTIL Configuration Settings Selectable Boot Settings BIOS BIOS Boot ID Boot LUN Restore Default Setting Configuration Settings Restore Default Setting Raw NVRAM Data 16 NVRAM Advanced Adapter Setting Fast!UTIL Configuration Settings Advanced Adapter Setting 18 QLOGIC QLA22OO

19 Execution Throttle Fast Command Posting Enabled or Disabled Enabled >4GByte Addressing Enabled or Disabled Disabled Luns per Target Enable LIP Reset Yes or No No Enable LIP Full Login Yes or No Yes Enable Target Reset Yes or No No Login Retry Count Port Down Retry Count Drivers Load RISC Code Enabled or Disabled Enabled Enable Database Updates Yes or No No Disable Database Load Yes or No No IOCB Allocation buffers 256 buffers Extended Error Logging Enabled or Disabled Disabled Execution Throttle 16 QLOGIC QLA22OO 19

20 Fast Command Posting >4GByte Addressing 4Gbyte LUNs per Target (Target Device) (LUN) Enable LIP Reset (Bus Reset routine) QLA22xx (LIP, Loop Initialization Process) (LIP) (Reset) Target (Full login) Enable LIP Full Login QLA22xx (LIP) (Re-login) 20 QLOGIC QLA22OO

21 Enable Target Reset SCSI Bus Reset Target Reset Login Retry Count QLA22xx 8 Port Down Retry Count QLA22xx 8 Drivers Load RISC Code QLA22xx BIOS Firmware QLA22xx Firmware Enable Database Updates QLA22xx Disable Database Load Windows NT (Registry) QLOGIC QLA22OO 21

22 IOCB Allocation (Buffer) 256 Extended Error Logging Windows NT Windows NT Event Viewer Extended Firmware Settings Fast!UTIL Configuration Settings Extended Firmware Settings Extended Control Block Enabled/Disabled Enabled RIO Operation Mode 0, 1, 2, 3, 4 0 Connection Options 0, 1, 2, 3 3 Class 2 Service Enabled/Disabled Disabled ACK0 Enabled/Disabled Disabled Fibre Channel Tape Support Enabled/Disabled Disabled Fibre Channel Confirm Enabled/Disabled Disabled 22 QLOGIC QLA22OO

23 Command Number Reference Enabled/Disabled Disabled Read Transfer Ready Enabled/Disabled Disabled Response Timer Interrupt Delay Timer Extended Control Block RIO Operation Mode (RIO, Reduced Interrupt Operation Mode) RIO bit 2 32-bit 3 16-bit 4 32-bit Connection Options (Loop) (Point-to-point) 3 QLOGIC QLA22OO 23

24 Class 2 Service (Loop/Port) (Class 2 service) ACK0 QLA22xx (Sequence ACK) (Frame (Class 2 service) Fibre Channel Tape Support (FCP-2 recovery) Fibre Channel Confirm (FCP 24 QLOGIC QLA22OO

25 confirmation frame) Command Reference Number Read Transfer Ready Response Timer QLA22xx ( 100-microsecond ) 0 Interrupt Delay Timer QLA22xx DMA ( 100-microsecond ) 0 3. Scan Fibre Channel Devices (loop ID) QLA22xx 4. Fibre Disk Utility (loop ID) QLOGIC QLA22OO 25

26 5. Select Host Adapter QLA22xx QLA22xx 26 QLOGIC QLA22OO

27 % 90% 5% 95% 2 QLA22xx PCI Local Bus Specification 2.2 PCI 3.3V 5.0V 32-bit 33 MHz PCI: 132 MB/s 32-bit 66 MHz PCI: 264 MB/s PCI 64-bit 33 MHz PCI: 264 MB/s 64-bit 66 MHz PCI: 528 MB/s (QLA2200/2200L) (QLA2200F/2202F/2204F/2212F) -GBIC(QLA2200G) 200 MB/s ISP2200A QLOGIC QLA22OO 27

28 RISC (FPM, Fibre Protocol Module) (Gigabit transceiver) PCI 64-bit, 33-MHz bus master DMA data transfers to 264 MB/s 64-bit, 66-MHz bus master DMA data transfers to 528 MB/s 128KB SRAM 128KB ( 2 BIOS ) 256 byte ( ) 3 (2 1 ) 4KB QLA2200/2200L: HSSDC MIA QLA2200F/2202F: SC Non-OFC 1x9 QLA2204F: LC non-ofc 1x9 QLA2200G: GBIC cm x 10.67cm (7.0" x 4.2") (QLA2200/2200F/2202F/2200G) 16.93cm x 5.15cm (6.7" x 2.0") (QLA2200L) 31.2cm x 10.6cm (12.2" x 4.2") (QLA2204F) QLOGIC QLA22OO

29 1 Windows 2000 OS 1. Qlogic HBA Internet 2. OS SCSI Qlogic HBA 3. SCSI CD-ROM 4. a: W2K oemsetup.inf qla2200.sys qla2200.dll C: WINNT System32 QLOGIC QLA22OO 29

30 7. Qlogic22xx HBA SCSI RAID HBA Qlogic QLA2200 PCI Fibre Channel Adapter 8. HBA 2 Windows OS Qlogic HBA 1. SCSI RAID Qlogic QLA2200 PCI Fibre Channel Adapter SCSI CD-ROM 4. a: W2K oemsetup.inf 30 QLOGIC QLA22OO

31 5. 6. qla2200.sys qlsdm.dll C: WINNT System32 7. Qlogic22xx HBA HBA SCSI RAID Qlogic QLA2200 PCI Fibre Channel Adapter 8. 3 RedHat Linux (1) Qlogic QLA22xx RedHat qla2xxxsrc-vx.yy.tgz (2) RedHat I. RPMs # rpm -qa grep kernel CDROM # rpm -i kernel-source* QLOGIC QLA22OO 31

32 # rpm -i kernel-headers* # mkdir /usr/src/linux/drivers/scsi/qla2xxx/ # cd /usr/src/linux/drivers/scsi/qla2xxx/ # mcopy a:*.tgz. (. ) # tar -xvzf *.tgz # rm -f makefile # cp -f Makefile.kernel Makefile SCSI Makefile # cd /usr/src/linux/drivers/scsi # vi Makefile a. subdir-$(config_scsi_aic7xxx) += aic7xxx b. subdir-$(config_scsi_qlogic_qla2xxx) += qla2xxx ifeq ($(CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2200),y) endif SUB_DIRS += qla2xxx MOD_IN_SUB_DIRS += qla2xxx else ifeq ($(CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2200),m) MOD_IN_SUB_DIRS += qla2xxx endif ifeq ($(CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2300),y) endif SUB_DIRS += qla2xxx MOD_IN_SUB_DIRS += qla2xxx else ifeq ($(CONFIG_SCSI_QLOGIC_QLA2XXX_QLA2300),m) MOD_IN_SUB_DIRS += qla2xxx endif c. obj-$(config_scsi_qlogic_qla2100) +=qla2x00.o d. obj-$(config_scsi_qlogic_qla2xxx_qla2200) += qla2xxx/qla2200.o e. Makefile qla2xxx/qla2200.o: cd qla2xxx; make qla2200.o kernel/scsi Config.in 32 QLOGIC QLA22OO

33 # cd /usr/src/linux/drivers/scsi # vi Config.in dep_tristate Qlogic QLA 2100 FC SCSI support CONFIG_SCSI_QLOGIC_QLA2100 $CONFIG_SCSI dep_tristate Qlogic QLA 2200 FC SCSI support CONFIG_SCSI_QLOGIC_QLA2200 $CONFIG_SCSI source drivers/scsi/qla2xxx/config.in Qlogic FC HBA # cd /usr/src/linux/drivers/addon/qla2200 # mv qla2200.o qla2200_rh.o # mv qla2300.o qla2300_rh.o # cd lib/modules/<kernel_ver>/drivers/addon/qla2200 # mv qla2200.o qla2200_rh.o # mv qla2300.o qla2300_rh.o Qlogic # cd /usr/src/linux # make menuconfig Main Menu SCSI Support ENTER SCSI Support Menu SCSI Generic Support SCSI low-level drivers ENTER SCSI low-level drivers Menu Qlogic 2xxx v6 FC SCSI support ENTER Qlogic QLA 2200 v6 FC SCSI support Main Menu. Do you wish to save your new kernel configuration? Yes # make dep bzimage modules modules_install II. A) HBA CDROM # cd /mnt/cdrom/redhat/rpms # rpm -iv kernel-headers*.rpm # rpm -iv kernel-source*.rpm QLOGIC QLA22OO 33

34 # cd /usr/src/linux-2.4 # make menuconfig Main Menu SCSI Support ENTER SCSI Support Menu SCSI Generic Support Main Menu. Do you wish to save your new kernel configuration? Yes # make dep # mkdir qla2x00 # cd qla2x00 # mcopy a:*.tgz. (. ) # tar -xvzf *.tgz # make all OSVER=;linux-2.4 B) HBA CDROM # cd /mnt/cdrom/redhat/rpms # rpm -iv kernel-headers*.rpm # rpm -iv kernel-source*.rpm # cd /usr/src/linux-2.4 # make menuconfig Main Menu SCSI Support ENTER SCSI Support Menu SCSI Generic Support Main Menu Processor type and features ENTER Symmetric multiprocessor SPACEBAR Processor type and features Main Menu. Do you wish to save your new kernel configuration? Yes # make dep # mkdir qla2x00 # cd qla2x00 # mcopy a:*.tgz. (. ) # tar -xvzf *.tgz 34 QLOGIC QLA22OO

35 # make all SMP=1 OSVER=linux-2.4 C) # insmod qla2200.o D) LUNs boot boot: linux max_scsi_luns=128 SCSI Mid-Layer /etc/modules.conf option scsi_mod max_scsi_luns=128 SCSI Mid-Layer LILO l/etc/lilo.conf append="max_scsi_luns=128" #lilo #reboot GRUB /etc/grub.conf kernel /vmlinux ro root=/dev/hda2 max_scsi_luns=128 reboot 统 #vi /proc/scsi/scsi #echo scsi add-single-device >/proc/scsi/scsi SCSI_ID 0 Target Channel 1 LUN LUN echo vi ID 4 Solaris SPARC SUN SPARC Solaris OS Qlogic QLA22xxHBA Qlogic ( qla2200_pkg.z 3. uncompress./qla2200_pkg.z 4. pkgadd -d./qla2200_pkg 5. The following packages are available: QLOGIC QLA22OO 35

36 1 QLA QLogic QLA2200 driver (sparc) Solaris 2.6, Rev=X.XX 2 QLA QLogic QLA2200 driver (sparc) Solaris 7, Rev=X.XX 3 QLA QLogic QLA2200 driver (sparc) Solaris 8-9, Rev=X.XX 4 QSLDMLIB QLogic SDM Library (sparc) Solaris 7-8-9, Rev=X.XX 5 QLSDMLIB6 QLogic SDM Library (sparc) Solaris 2.6, Rev=X.XX 6 scfx2-6 QLogic SANblade Control FX (HBA Configuration Utility (sparc) Solaris 2.6, 7, Rev=X.XX 7 scfx2-8 QLogic SANblade Control FX (HBA Configuration Select package(s) you wish to process Utility (sparc) Solaris 8-9, Rev=X.XX (or all to process all packages). (default: all)[?,??,q]: 6. ENTER 7. Processing package instance <QLA2200-2> from </tmpdir/qla2200_pkg> QLogic QLA2200 driver (sparc) Solaris 7, Rev=X.XX Copyright (c) , by QLogic Corporation. All rights reserved. Where do you want the driver object installed (default=/kernel/drv): 8. Y ##Executing checkinstll script. Using </> as the package base directory. ## Processing package information. ## Processing system information. ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. ## Checking for setuid/setgid programs. This package contains scripts which will be executed with super-user permission during the process of installing this package. Do you want to continue with the installation of <QLA2200-2> [y,n,?] QLOGIC QLA22OO

37 Installing QLogic QLA2200 driver as <QLA2200-2> ## Installing part 1 of 1. /kernel/drv/qla2200 /kernel/drv/qla2200.conf /kernel/drv/sparcv9/qla2200 [ verifying class <none> ] ## Executing postinstall script. Reboot client to install driver. Installation of <QLA2200-2> was successful. 10. Solaris LUN HBA 32 luns /kernel/drv/qla2200.conf hba0-loop-down-timeout=60 hba0-link-down-error=1 hba0-loop-down-timeout=60 hba0-persistent-binding-configuration=0 hba0-fast-error-reporting=0 hba0-adapter-node-name="200000e08b073190"; hba0-adapter-port-name="210000e08b073190"; hba0-scsi-target-id-0-fibre-channel-node-name="200600a0b80cc7d3"; hba0-scsi-target-id-0-fibre-channel-port-name="200700a0b80cc7d4"; LUN hba ID Target ID Node_WWN Port_WWN dmseg more QLOGIC QLA22OO 37

QLOGIC QLA22OO 使用手冊

QLOGIC QLA22OO 使用手冊 QLOGIC QLA23XX HBA 1.0 2002 ...5 1....5 2.?...5 3....5...7 1....7 2....7 3....99...122 1....122 2....122 3....133 4....133 FAST!UTIL...144 1....144 2. CONFIGURATION SETTINGS...144 3. SCAN FIBRE CHANNEL