CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE P

Transcription

1 Wall-mounted CD Player Model CPD-4 USER MANUAL CD CPD-4 ENGLISH p Thank you for purchasing this product. p Be sure to read this user manual before operating the product and use it correctly. p Store this manual in a safe place for future reference. p p p D A

2 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 2

3 < Do not expose this apparatus to drips or splashes. < Do not place any objects filled with liquids, such as vases, on the apparatus. < Do not install this apparatus in a confined space such as a book case or similar unit. < The apparatus draws nominal non-operating power from the AC outlet. < The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time. < The appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. < If the product uses batteries (including a battery pack or installed batteries), they should not be exposed to sunshine, fire or excessive heat. < CAUTION for products that use replaceable lithium batteries: there is danger of explosion if a battery is replaced with an incorrect type of battery. Replace only with the same or equivalent type. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN. < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT MUJI LIMITED FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. < USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners. 3

4 Contents Before Using the Unit Safety Precautions Discs MP3/WMA Compatibility Identifying the Parts Remote Control Unit Installation Method Connecting the AC adaptor Listening to a Disc Listening to the Radio Troubleshooting Specifications Before Using the Unit What s in the box Confirm the supplied standard accessories. Remote control unit x 1 Battery (CR2025) for remote control unit x 1 (The battery has been installed in the remote control unit when shipped from the factory.) Wall-fixing plate x 1 Fixing screws x 4 Dedicated AC adaptor x 1 Owner s manual (this document) x 1 4

5 AC adaptor s plug Please change the AC adaptor plug to suit the mains socket where you will use the unit. 1. While pulling the tab at the side of the AC adaptor plug, pull the plug out at an angle to remove it. 2. Attach the concave part of the plug (A) to the convex part (B) on the inside opposite the tab. (A) (B) (A) Read this before operation < When a disc is inserted into the unit, do not tilt the unit. Doing so might cause a malfunction. < Before the unit is moved, or covered with a paper or cloth for a moving, be sure to remove the disc from the unit. If the unit is moved with a disc inside, it might cause a malfunction. < Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. You should also avoid locations that are subject to vibration, excessive dust, heat, cold, or moisture. Doing so might result in discoloration or deformation, or cause a malfunction. < When the unit is turned on, if a TV is turned on nearby lines might appear on the TV screen depending on the frequency of the TV broadcast. This is not a malfunction of the unit or the TV. If you see such lines, turn off the unit (standby), or remove the plug of the AC adaptor from the socket. < While the plug of the AC adaptor is inserted into the socket, power is consumed even in stand-by mode. ENGLISH 3. Insert the plug until you hear a click. 5

6 Safety Precautions In order to use the product safely and correctly, and to prevent both injury to yourself and others around you and damage to property, please read the following safety precautions carefully before use. 6 Q Warning F Disconnect at plug A Prohibited If you ignore the following warnings and use the product incorrectly, it may cause death or serious injury due to fire or electrocution. If anything unusual occurs If smoke, a strange smell, or a strange noise is emitted from the product If water or foreign bodies get into the product If the product falls and becomes damaged You must remove the plug of the AC adaptor from the power socket immediately. Do not continue to use the product as this may cause a fire or electric shock. Contact your retailer. Before installing and removing this product, always ensure you remove the plug of the AC adaptor from the power socket. If the plug of the AC adaptor is still inserted into the power socket, there is a risk of accident or electrocution. Before moving this product, always remove the plug of the AC adaptor from the power socket. The cable of the AC adaptor may be damaged, and it may cause a fire or electric shock. If you do not use the product for an extended period of time, for example, if you are going away on vacation, the plug of the AC adaptor must be removed from the power socket for safety reasons. Remove the plug of the AC adaptor from the power socket for safety reasons before maintenance. Otherwise, it may cause electrocution. Do not damage the DC power cable and AC adaptor cable. Do not place anything heavy on the DC power cable and AC adaptor cable, or place the DC power cable and AC adaptor cable under the product. Do not alter, bend excessively, twist, pull, or heat the DC power cable and AC adaptor cable and AC adaptor cable. If the DC power cable or AC adaptor cable is damaged (the core is exposed or broken), it may cause a fire or electric shock. In such a case, ask your retailer to exchange it.

7 Q Warning A Prohibited If you ignore the following warnings and use the product incorrectly, it may cause death or serious injury due to fire or electrocution. Keep the plug of the AC adaptor free from dust. If there is dirt or dust between the plug of the AC adaptor and the power socket, it may cause a fire or electric shock. Remove dirt or dust after removing the plug of the AC adaptor from the power socket. Do not use the product with any voltage other than that indicated on the AC adaptor. This product is for use within the country of purchase only. It cannot be used in other countries. Do not use the product with any power supply or voltage other than that indicated on the AC adaptor. Do not connect the AC adaptor to DC power supplies of on ships, etc. Doing so may cause a fire or electric shock. Do not use any AC adaptor other than that supplied with this product. Do not use the AC adaptor supplied with this product for another equipment. Doing so may cause a malfunction, fire, or electric shock. Do not leave the DC power cable near any heat sources such as stoves or other objects that produce heat. The cover of the DC power cable may be melted and it may cause a fire or electric shock. Do not touch the plug of the AC adaptor with wet hands. Doing so may result in electrocution. Do not pull on the AC adaptor cable when you remove the plug of the AC adaptor from the power socket. The AC adaptor cable may be damaged, and it may cause a fire or electric shock. Be sure to grasp the plug of the AC adaptor when removing it from the power socket. Do not place vases or anything containing water or other liquids on the product. If water gets into the product, it may cause a fire or electric shock. ENGLISH 7

8 Safety Precautions (Continued) Q Warning A Do Prohibited D Do No disassembly S Mandatory Action If you ignore the following warnings and use the product incorrectly, it may cause death or serious injury due to fire or electrocution. not locate the product in a place that is either damp or dusty. Do not use the product in a bathroom. Do not locate the product in a place where it may be exposed to smoke or steam, such as near a kitchen table or humidifier. Doing so may result in a fire, electric shock, or injury. not take this product apart. Doing so may cause a fire or electric shock. Ask the retailer for servicing/ repairs of the inside. Do not alter this product. Doing so may cause a fire or electric shock. The product should be located close to the power socket so that you can easily grasp the plug of the AC adaptor at any time. If anything unusual occurs, you must remove the plug of the AC adaptor from the power socket immediately. The product should be located away from another equipment in order to be able to expel heat. When the product is installed in a rack or similar unit, leave a space of at least 5 cm (2 inches) above the product. Heat is generated inside the product, and may cause a fire if not expelled properly. 8

9 Q Caution Q When installing this product, refer to the installation method in this manual at all times, taking care to observe the following. Precaution Against fall A Prohibited If you ignore the following cautions and use the product incorrectly, it may cause injury to yourself and others around you and damage to property due to electrocution or other accidents. When attaching the wall-fixing plate, make sure that you use screw fixings that are appropriate for the structure and material of the wall. The product may cause injury in the event that it falls from the wall. Do not place the product on an unstable or uneven place. The product may cause injury in the event that it falls from the wall. Do not move the product during playback. Do not pick up or move the product since the disc spins very quickly during playback. Doing so may cause scratches on the disc. ENGLISH 9

10 Safety Precautions (Continued) Battery Precautions This product uses a battery. If you handle the battery incorrectly, it may result in the battery heating up, catching fire, or leaking. Be sure to observe the following precautions. QWarning S Mandatory Action A Prohibited D Do No disassembly Warnings for battery usage When inserting the battery into the remote control unit, check that the polarities (positive + and negative - ) are correctly positioned, and insert it according to the indication on the battery case. If you insert the battery incorrectly, it may cause a fire or injury, or staining of surrounding objects due to explosion or leaking. If the remote control unit is not used for a long time, remove the battery. Battery leakage may cause a fire or injury, or staining of surrounding objects. If the battery leaks, wipe away the leakage inside the battery compartment and replace the battery with a new one. If the leakage adheres to your skin, wash it with water. Do not use any batteries other than those specified for the remote control unit. Otherwise, it may cause a fire or injury, or staining of surrounding objects due to explosion or leaking. Do not carry or store the battery with other metallic objects. The battery may short circuit, which may cause it to explode or leak, etc. not take the battery apart. Acidic matter inside the battery may cause damage to your skin or clothes. 10

11 Discs Discs that can be played on this unit < If you are uncertain about the handling of a CD-R or CD-RW disc, please contact the seller of the disc directly. CDs that bear the COMPACT disc DIGITAL AUDIO logo. CD-R and CD-RW discs that have been correctly recorded in the audio CD format and finalized. Finalized CD-R and CD-RW discs that contain MP3/ WMA files. This unit can play back the above-mentioned disc types. It cannot play back the discs of the other types. Caution: Playback of any other type of disc could cause loud noise and damage to speakers as well as harm hearing. Never play back any other type of disc. Caution < Do not play any disc that is warped, deformed or damaged. Playing such discs could cause irreparable harm to the playing mechanisms. < Use a soft oil-based felt-tipped pen to write information on the label side. Never use a ballpoint or hard-tipped pen, as this could cause damage to the recorded side. < Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanisms and cause them to malfunction. < Do not use irregularly-shaped discs (octagonal, heart-shaped, business card size, etc.). CDs with these shapes could damage the unit. ENGLISH < Copy-protected discs and other discs that do not conform to the CD standard might not play correctly in this unit. If you use such discs in this unit, MUJI LIMITED and its subsidiaries will not be responsible for any consequences or guarantee the quality of reproduction. If you experience problems with such non-standard discs, you should contact their issuers. About CD-R/CD-RW discs This unit can play back CD-R and CD-RW discs that have been recorded in the audio CD format (CD-DA). Also can playback MP3 and WMA files recorded into the CD-R/CD-RW discs. < Discs created by a CD recorder must be finalized before use with this unit. < Depending on disc quality and recording conditions, playback of some discs might not be possible. Please see the manual for the device that you used to create the disc. Handling precautions < Always insert a disc with the label side up. Only one side of a Compact Disc can be played. < If there are scratches, fingerprints, or stains on the recorded side (non-label side), an error may occur when attempting to play back a disc. Handle the disc carefully. < To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. How to remove the disc How to hold the disc Continued on the next page 11

12 Discs (Continued) MP3/WMA Compatibility Storage precautions < Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to skip. < Do not expose discs to direct sunlight or hightemperature and humidity for extended periods. Long exposure to high temperatures will warp discs. < CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in locations where they will be exposed to direct sunlight. They should also be kept away from sources of heat, such as radiators and heatgenerating electrical devices. < Dirt on the disc may cause the sound to skip or reduce the sound quality. Be sure to keep the discs clean. Maintenance < If a disc becomes dirty, wipe its surface radially from the center hole outward towards the outer edge with a soft, dry cloth. This unit can play MP3/WMA files recorded on a CD-R, CD-RW discs. < This unit can play back monaural and stereo MP3 files that are in the MPEG-1 Audio Layer 3 format with a sampling rate of 16 khz or 48 khz and a bit rate of 32 to 320 kbps. < WMA file must have a sampling rate of 32 khz, 44.1 khz or 48 khz, and a bit-rate of 48 to 192 kbps. < This unit cannot play copyright protected files. Cautions when preparing MP3/ WMA files using a computer or other device < Always include the extension in the file name. This unit recognizes MP3 files by their.mp3, and WMA files by their.wma file extensions. < Always close the session (complete disc creation). This unit cannot play discs if the session has not been closed. < If the disc contains more than 999 files or 99 folders, this unit cannot play it back correctly. < Never clean discs using chemicals such as record sprays, antistatic sprays and fluids, and thinner. Such chemicals will do irreparable damage to the disc s plastic surface. 12

13 Identifying the Parts Main unit Display* Mode button (MODE) Volume button (,+) Lens Skip button Back/forward button (.,/) Remote sensor Protective sheet (card) Central hub Speakers DC Power cable (play/stop) FM antenna Connection to the AC adaptor ENGLISH Remote control unit Skip button (back) (.) Back button (m) Stop button (H) Skip button (forward) (/) Forward button (,) Play/Pause button (y/j) Repeat button (REPEAT) FM button (FM) Volume button (VOLUME+/ ) To simplify explanations, instructions in this manual might refer to the main unit or remote control unit only. In such cases, the same controls on the remote control and main unit will operate similarly. 13

14 Remote Control Unit Installation Method Notes on using the remote control unit < Even if the remote control is used within its effective operation range (5 m/16 feet), the unit might not respond to the remote if there are any obstacles between them. < The remote control might not function if sunlight or other bright light shines directly on the remote sensor of the unit. < The remote control might function incorrectly if it is operated near other products that generate infrared rays or if other remote control devices that use infrared rays are operated near the unit. Likewise, the other products might also function incorrectly. Before using the remote control When you use the remote control for the first time, pull out the insulation sheet from the rear. Battery replacement The battery has been installed in the remote control unit when shipped from the factory. To replace the battery, pull out the battery tray from the rear, put the lithium-ion battery (CR2025) in with the "+" side facing up, and insert the tray again. 1 Attach the wall-fixing plate to the wall. Choose a sturdy wall, and install the wall-fixing plate using the supplied screws or other fixings. < Make sure that the wall-fixing plate does not feel shaky or loose. Q Caution Be very careful when attaching the wall-fixing plate to the wall. < When attaching to walls made of plasterboard or concrete construction etc. please make sure that you use proprietary fixings that are appropriate for the wall. In particular, it is very hazardous to use regular wood screws on walls that are made of plasterboard or a similar type of material. 2 Extend the FM antenna. Unwind the FM antenna on the rear, and extend it. Battery replacement time If the distance required between the remote control unit and main unit decreases, or the remote control unit's buttons don't work, the battery is exhausted. In this case, replace the battery with a new one. For information about the collection of batteries, please contact your local municipality, your waste disposal service or the place where you purchased them. 14

15 Connecting the AC adaptor 3 Attach the unit to the wall-fixing plate. After connecting the power cord to the dedicated AC adaptor cord, plug the adaptor into an outlet. Line the unit up with the wall-fixing plate and clip the back of the unit on at the slots. < Make sure that the unit is firmly attached. < Extend the FM antenna fully and position for the best reception. Into a power socket Dedicated AC adaptor The DC power cable of the unit The plug of the AC adaptor ENGLISH 15

16 Listening to a Disc 1 Insert the CD into the unit. Fix the CD onto the central hub of the unit. 3 Press the volume buttons (,+) to adjust the volume. VOL 05 The volume level is shown. Q Caution Fix the CD firmly into the unit until you hear a click. The CD will spin very fast, so it is extremely hazardous if the CD is not inserted correctly into the unit. < Be careful not to press the CD too hard when you fix it. Doing so may cause scratches on the CD. 2 Gently pull the DC power cable to play back the CD. CD playback will start automatically. < The volume can be adjusted in a range between 00 and 32. ( MAX is shown on the display at 32.) To stop the playback, gently pull the DC power cable again. < The stop button (H) on the remote control unit can also be used. < 30 minutes after playback finishes, the machine will automatically enter stand-by mode. To re-activate from stand-by mode, pull on the power cable lightly. Removing the CD Pull the CD straight outwards to remove it. < The play/pause button (y/j) on the remote control unit can also be used. < Please do not touch the CD whilst it is spinning/ playing. < Be careful not to press the CD too hard when you remove it. Doing so may cause scratches on the CD. Caution Never touch the lens. Please take care, as any damage or dirt can cause the CD player to malfunction. 16

17 Selecting tracks To previous track 02 00:05 The track number and the elapsed time are shown. < During playback, press the skip button (.) repeatedly to return to the previous tracks. < During playback, press the skip button (.) once to return to the start of the current track. < During playback, keeping the skip button (.) held down will take you back more quickly. To next track 04 00:05 < During playback, press the repeat button (REPEAT) once to play back all tracks on the disc repeatedly from the first track ("REPEAT" is shown on the display). < To stop the repeat playback, press the repeat button (REPEAT) again ("NORMAL" is shown on the display). MP3/WMA Playback Order MP3/WMA files on a CD can be stored in folders in the same way that files are managed on a computer. Moreover, multiple folders can be contained inside another folder. Here is an example of the file and folder structure of an MP3/WMA disc, showing the order of the folders and the playback order of the files ( 1 to 7 ). MP3 file ENGLISH 02 folder The track number and the elapsed time are shown. MP3 file MP3 file < During playback, press the skip button (/) repeatedly to go to the next tracks. < During playback, press the skip button (/) once to go to the start of the next track. < During playback, keeping the skip button (/) held down will take you ahead more quickly. 03 folder folder 04 folder MP3 file MP3 file MP3 file Playing back all tracks repeatedly 05 folder MP3 file < The playback order shown in the diagram above may change depending on how you add, delete, or move files or folders. 17

18 Listening to the Radio 1 Press the Mode button (MODE). The source changes to FM. FM 87.5 Manual selection To tune in to a station the unit cannot tune in to automatically, press the skip button (.//) repeatedly to select the station you want to listen to. FM 87.5 The frequency is shown after "FM" is shown. < The FM button (FM) on the remote control unit can also be used. < When a CD is not inserted into the unit, pulling the DC power cable will also perform the same operation. 2 Select the station you want to listen to. Automatic selection FM 87.5 < Press the skip button (.//) briefly. The frequency changes by a fixed step (0.1MHz). Press repeatedly until the station you want to listen to is tuned in. < You can also use the skip buttons (.//) on the remote control. 3 Press the volume buttons (,+) to adjust the volume. VOL 05 Hold down Hold the skip button (.//) for more than 2 seconds and release it when the frequency display starts changing continuously. A station is tuned in automatically, and the frequency display will stop. Repeat this step until the station you want to listen to is found. < To stop the automatic tuning process, press the skip button (.//) briefly. The volume level is shown. < The volume can be adjusted in a range between 00 and 32. ( MAX is shown on the display at 32.) 18

19 Troubleshooting If the reception is poor Extend the FM antenna or change its position to improve the reception of a station. If you a have problem with your system, read this page and try to solve the problem yourself before calling your dealer. To turn off the unit (standby), press the Mode button (MODE) again. < The FM button (FM) on the remote control unit can also be used. < When a CD is not inserted into the unit, pulling the DC power cable will also turn off the unit (standby). General No power. e Insert the plug of the AC adaptor into a power socket. e Check the connection of the DC power cable and the AC adaptor cable. e If the battery of the remote control unit is exhausted, replace it with a new one. I m pressing the buttons but nothing is working. e Condensation. Wait one hour before using. No sound is coming from the speakers. e The volume is turned down. Adjust the volume. The remote control does not work. e The insulation sheet has been inserted in the battery compartment when shipped from the factory. Pull it out before use. For details, see page 14. e If the battery is exhausted, replace it with a new one. e Use the remote control unit within the operation range (5 m/16 feet) and point it at the remote sensor on the main unit. e Remove obstacles between the remote control unit and the main unit. e If a bright light is near the unit, turn it off. The sound is noisy. e The unit is too close to a TV or similar device. Relocate it away from the interfering device or turn it off. ENGLISH 19

20 Troubleshooting (Continued) CD player Cannot insert the CD into the unit. e Remove dust or obstacles from the central hub of the unit. Cannot play. e Insert a disc with the label side facing you. e You cannot play back unfinalized CD-R/RW discs. Finalize such a disc using a CD recorder and try again. e Depending on the disc type, it may not be possible to play back. For details, see pages 11 and 12. The sound stutters or breaks up. e The unit is placed somewhere where there is a lot of vibration. Put it somewhere with less vibration. e The disc is dirty. Clean the disc. A microcomputer is used in this unit, it may sometimes not operate correctly due to noise, etc. from around the unit. In this case, remove the plug of the AC adaptor from the power socket, wait for a while before inserting the plug back into the power socket, then operate the unit again. Maintenance If the main unit or remote control unit gets dirty, wipe with a soft cloth or use a diluted, mild, liquid soap. Do not use benzine or thinner as they could damage the surface of the unit. Q Caution Remove the plug of the AC adaptor from the power socket before maintenance. MP3/WMA Cannot play. e Check the MP3/WMA file extension. For details about the extension, see page 12. FM Tuner Cannot listen to any station, or the signal is too weak. e Tune in to a station properly. e Change the position or orientation of the main unit until you receive the station clearly. e Rotate the FM antenna until you receive the station clearly. 20

21 Specifications CD Player Playable disc types...cd/cd-r/cd-rw (8cm/12cm) Playable formats...cd-da, MP3/WMA file Pickup Non-contact optical pickup/semiconductor laser Sampling frequency khz Frequency characteristic... 20Hz to 20kHz Wow and flutter...below limited measurable quantity TUNER FM Frequency Range MHz to MHz Playback formats (MP3/WMA) MP3 Compatible format... MPEG-1/2 Audio Layer-3 Extension...mp3 Sampling frequency...16khz to 48kHz Bit rate...32kbps to 320kbps WMA Compatible format Windows Media Audio Standard (not copyright protected files) Extension...wma Sampling frequency...32khz, 44.1kHz, 48kHz Bit rate...48kbps to 192kbps Maximum number of folders Maximum number of files (each folder) General Supply voltage/power... AC V, 50 / 60Hz Power dissipation w Maximum outer dimensions (Main unit) W=172mm H=172mm D=41mm Weight (excluding the AC adaptor)...550g Accessories Remote control unit 1 Battery (CR2025) for remote control unit 1 The battery has been installed in the remote control when shipped from the factory. Wall-fixing plate 1 Fixing screws 4 Dedicated AC adaptor 1 Owner s manual (this document) 1 < Design and specifications are subject to change without notice. < Illustrations may differ slightly from production models. ENGLISH Speakers Speaker unit...3.5cm full range speaker 2 Rated impedance...4ω Amp Rated output...2w 2 Frequency characteristic... 50Hz to 20kHz 21

22 MP3/WMA CD CR

23 變壓 1. 變壓 裝 擴音器 2. AB 掛 拔 變壓 (A) (B) (A) 3. 23

24 錯誤 F 拔 拔 拔 拔 A 24

25 A 錯誤 拔 變壓 變壓 DC 變壓 變壓 拔 拔 拔 25

26 錯誤 D S 拔 5cm 錯誤 Q A 26

27 錯誤操作 S + _ 沖洗乾淨 A D 27

28 標示有 "COMPACT disk DIGITAL AUDIO" CD CD CD-R CD-RW MP3/WMA CD-R CD-RW Q CD CD 諮 CD-R/CD-RW CD CD-DA MP3/ WMA CD-R/CD-RW CD / CD CD 誤 CD CD-R CD-RW 諮 28

29 MP3/WMA CD-R/CD-RWCD CD-R/CD-RWMP3/WMA MP3.mp3 32kbps 320kbps 取樣頻率 16kHz 48kHz WMA.wma 48kbps 192kbps 取樣頻率 kHz DRM MP3/WMA CD-R/CD-RW

30 5 誤 1 Q 1CR FM Q 27 FM 30

31 3 CD CD FM 31

32 * MODE + /. / FM / 連接交流電源變壓器. m H /, / y/j REPEAT FM FM VOLUME +/- 32

33 CD 1 CD CD 3 VOL 05 Q CD CD CD CD 2 CD 00 32MAX H 30 CD CD y/j CD CD CD 33

34 CD 02 00:05 1 REPEAT 1 REPEAT REPEATNORMAL MP3/WMA MP3/WMA CD MP3/WMA MP3/WMA 1 ~ :05 / 1 / / / 34

35 1 MODE FM 台 台 台.// 台 FM 87.5 FM 87.5 FM FM FM CD 2 台 台 1.// 0.1MHz (.//) 3 + FM 87.5 VOL MAX.// 2 台 台.// FM MODE FM FM CD 35

36 處 e e 變壓 e e 1 e e 30 e e 5 e e e CD CD e e CD e CD-R/CD-RW e e e CD MP3/WMA e 29 e 台 e e FM 拔 Q 拔 36

37 CD...CD/CD-R/CD-RW 8cm/12cm...CD-DA MP3/WMA 讀取器... 取樣頻率 kHz 頻率範圍...20Hz 20kHz MHz 108.0MHz MP3/WMA MP3...MPEG-1/2 Audio Layer-3...mp3 取樣頻率 kHz...32k 320kbps WMA Windows Media Audio StandardDRM...wma 取樣頻率 kHz...48k 192kbps AC V, 50 / 60Hz... 12W 172mm 172mm 41mm 變壓...550g 1 CR 變壓 cm 擴大器 EIAJ...2W 2 頻率範圍...50Hz 20kHz 37

38 38

39 39

40 MUJI TAIWAN Company Limited 8F.,NO.8,Dongsing Rd.,Sinyi District.Taipei City 110,Taiwan MUJI(Hong Kong)Company Limited Miramar Tower, 132 Nathan Road, Tsim Sha Tsui, Kowloon, Hong Kong MUJI THAILAND MUJI PHILIPPINE MUJI INDONESIA Muji (Singapore) Pte Ltd 60 Albert Street #15-02to04, OG Albert Complex, Singapore