Metalworking Tools 萬事達切削刀具分類總覽 BR1801
|
|
- 堀 骆
- 4 years ago
- Views:
Transcription
1 Metalworking Tools 萬事達切削刀具分類總覽 BR1801
2 Solid Endmills Solid Carbide Endmills H700 for High Hardened steel 用於高硬鋼 High Feed, HRC 50~70. 高進給側銑及端銑加工 Low helix, multiple flutes design. SICO, NACO coating. 低螺旋 多刃設計 含矽塗層技術 H680 for High Hardened steel 用於高硬鋼 High Precision, HRC 50~68. 高精度及高效率加工 Radius tolerance ±5μm. SICO-TH coating. R 公差 ±5μm 含矽厚塗層技術 H650 for High Hardened steel 用於高硬鋼 High Speed, HRC 40~65. 高速及高效率加工 High rigidity design. SICO, TOP ARCO coating. 高剛性設計 含矽或含鉻塗層技術 H600 for Pre-Hardened steel 用於預硬鋼 High Speed, HRC 35~58. 高速及高效率加工 Wide range application. SICO coating. 廣泛的加工應用 含矽塗層技術 G550 for Pre-Hardened steel 用於預硬鋼 General cutting, HRC 30~55. 一般加工 High rigidity design. UNICO coating. 高剛性設計 高鋁鈦塗層技術 EUROS for Pre-Hardened steel 用於預硬鋼 High Feed, HRC < 60. 高進給加工 Tip with small chamfer or small radius. UNICO, SICO coating. 刀尖小倒角或小圓角設計 高鋁鈦或含矽塗層技術 01
3 Solid Endmills Solid Carbide Endmills M500 for Stainless and Pre-Hardened 用於不鏽鋼及預硬鋼 General cutting, HRC < 50. 一般加工 High rigidity design. ARCO coating. 高剛性設計 含鉻塗層技術 V530 Varix Endmill for High Temperature alloy 用於高溫合金 High efficiency, HRC < 55. 高效益加工 Unequal Flute Spacing and Variable Helix. SICO-TH coating. 抗震不等型設計 含矽厚塗層技術 V470 Varix Endmill for Steel and Stainless 用於鋼料及不鏽鋼 High efficiency, HRC < 40. 高效益 高去除率加工 Unequal Flute Spacing. UNICO coating. 抗震不等型設計 高鋁鈦塗層技術 G450 for Steel and Alloy steel 用於鋼料及合金鋼 General cutting, HRC < 48. 一般加工 Wide range application. UNICO coating. 廣泛的加工應用 高鋁鈦塗層技術 A200 for Graphite 用於石墨 General cutting. Special edge treatment. DIA diamond coating. 一般加工 刀口特殊處理 鑽石塗層技術 A100 for Aluminum 用於鋁 High Speed. Excellent chip evacuation design. CDLC coating available. 高速加工 深溝槽易排屑設計 提供 CDLC 塗層可供選擇 02
4 Indexable Milling Milling Inserts & Tools CXXN 90 Shoulder Milling 90 方肩銑削系列 For small and large sized milling machines. Double sided insert, 6 cutting edges. Use XNMX0403 or XNMX0806 insert. Endmill and modular types. 特別適用於大中小型機台雙面刀片,6 個切削角使用 XNMX0403 或 XNMX0806 雙面刀片端銑刀桿, 鎖牙式銑刀頭與面銑刀盤可供選擇 CXSN 45 Face Milling 平面銑削系列 2 types of double sided inserts fit in same pocket. Double sided, 8 or 16 cutting edges. Use SNMX1205 or ONMX0505 insert. Face milling types. 兩種雙面刀片, 可共用於相同刀盤雙面刀片,8 或 16 個切削角使用 SNMX1205 或 ONMX0505 雙面刀片面銑刀盤可供選擇 CXBN High Feed Face Milling 高進給平面銑削系列 High feed inserts allow lower cutting force. Double sided insert, 4 cutting edges. Use BNMX0603 or BNMX0904 insert. 高進給低切削阻力的刀片確保產能最大化雙面刀片,4 個切削角使用 BNMX0603 或 BNMX0904 雙面刀片端銑刀桿, 鎖牙式銑刀頭與面銑刀盤可供選擇 CXWN High Feed Face Milling 高進給平面銑削系列 High rigidity cutting edge design. Double sided insert, 6 cutting edges. Use WNMX09T3 or WNMX1305 insert. Endmill and face milling types. 雙面高剛性的切削角設計雙面刀片,6 個切削角使用 WNMX09T3 或 WNMX1305 雙面刀片端銑刀桿與面銑刀盤可供選擇 CXLN High Feed Face Milling 高進給平面銑削系列 For small milling machines. Double sided insert, 4 cutting edges. Use LNMX0303 insert. 適合較低功率的小型機台使用雙面刀片,4 個切削角使用 LNMX0303 雙面刀片端銑刀桿, 鎖牙式銑刀頭與面銑刀盤可供選擇 Milling Inserts 刀片系列 More than 100 types to choose from. Usable range include Shoulder, Face, Copy, High feed face, Helical, Disc and Chamfer Milling. 超過 100 種刀片種類可供選擇加工範圍包含方肩銑削 平面銑削 仿形銑削 高進給平面銑削 玉米銑削 三面刃銑削 倒角銑削 03
5 Indexable Milling Milling Inserts & Tools CAXO 90 Mini Shoulder Milling 90 小徑多刃方肩銑削系列 For small sized milling machines. 2 cutting edges, cutter range 10~20 mm. Use XOMT0602 or XOMT10T3 insert. Endmill and modular types. 低主軸負荷, 特別適用於小型機台 2 個切削角, 刀具尺寸 10~20mm 使用 XOMT0602 或 XOMT10T3 刀片端銑刀桿與鎖牙式銑刀頭可供選擇 CART 90 Mini Shoulder Milling 90 小徑方肩銑削系列 For small sized milling machines. 2 cutting edges, cutter range 10~21 mm. Use WRT0702 or WRT1003 insert. Endmill and modular types. 低主軸負荷, 特別適用於小型機台 2 個切削角, 刀具尺寸 10~21mm 使用 WRT0702 或 WRT1003 刀片端銑刀桿與鎖牙式銑刀頭可供選擇 CR39 90 Shoulder Milling 90 方肩銑削系列 For productive milling at high speed machining. 2 cutting edges, cutter range 16~80 mm. Use W39011T3 insert. 專為高速加工時的高效率銑削而設計 2 個切削角, 刀具尺寸 16~80mm 使用 W39011T3 刀片端銑刀桿, 鎖牙式銑刀頭與面銑刀盤可供選擇 CATP 90 Shoulder Milling 90 方肩銑削系列 Innovative & economical shoulder milling. 3 cutting edges, cutter range 20~63 mm. Use TPMX1004 insert. 三個加工角設計帶來更大的經濟效益 3 個切削角, 刀具尺寸 20~63mm 使用 TPMX1004 刀片端銑刀桿與面銑刀盤可供選擇 CAPK 90 Shoulder Milling 90 方肩銑削系列 Enhancement chip breaker design. 2 cutting edges, cutter range 16~100 mm. Use APKT1003 or APKT1604 insert. 強壯的刀口設計提供更好的刀具壽命 2 個切削角, 刀具尺寸 16~100mm 使用 APKT1003 或 APKT1604 刀片端銑刀桿, 鎖牙式銑刀頭與面銑刀盤可供選擇 CWEX 90 Shoulder Milling 90 方肩銑削系列 High efficiency and high removal rates. 2 cutting edges, cutter range 16~100 mm. Use AXMT1235 or AXMT1705 insert. Endmill and face milling types. 高效率和高移除率的方肩銑削 2 個切削角, 刀具尺寸 16~100mm 使用 AXMT1235 或 AXMT1705 刀片端銑刀桿與面銑刀盤可供選擇 04
6 Indexable Turning Turning Inserts 2018 New Turning Grades for Stainless steel 2018 年全新不鏽鋼車刀片材質 CX2545 & CX3545 grades with anti-sticky coating, it virtually eliminates the occurrence of built-up edge while retaining a secure cutting edge. Excellent anti-corrosive and wear resistance with higher reliability of tools, which provides users with reduced tool costs. It provides significantly longer tool life to conventional grades under the same cutting conditions. It s the first choice for Titanium and Stainless. 獨特的新世代材質 CX2545 & CX3545 擁有抗沾黏塗層, 有效減少切屑堆積, 保持刀口鋒利 優異的抗腐蝕性與耐磨性, 提供更高的刀具可靠性, 降低刀具成本 在相同的切削環境下, 對刀具壽命有著顯著的提升, 更適用於鈦合金與不鏽鋼加工 Turning Inserts for General Purpose 泛用車刀片 VCGT DCGT TCMT Negative Types 負角車刀片 50+ types to choose from. Thick coating layer structure for various applications. Longitudinal, profile and face turning machining. Usable range cover from medium to roughing. Positive Types 正角車刀片 25+ types to choose from. G or M tolerance inserts available. Internal turning, profiling and boring machining. Usable range cover from semi-finishing to roughing. 超過 50 種刀片種類可供選擇針對多樣化加工提供厚塗層對應適合端面, 輪廓及外徑加工應用加工範圍包含蓋中加工至粗加工超過 25 種刀片種類可供選擇可提供 G 級或 M 級公差車刀片適合內孔, 輪廓及鏜孔加工應用加工範圍包含半精加工至粗加工 Turning Grades for General Purpose 泛用車刀片材質 切削速200 度 Cutting Speed (m/min) CX2555, CX2560 General Purpose Cutting 泛用車削環境 CX3555, CX3560 Heavy Interrupted Cutting 強烈斷續車削環境 Finishing 精加工 Light to Continuous 連續性輕加工 Continuous to Light Intearrupted 連續性或輕微斷續加工 Application Range Intearrupted to Heavy Intearrupted 斷續至強烈斷續加工 Roughing 粗加工 05
7 Holemaking Tools Solid Carbide Drills DPC & DPN for Steel 用於鋼料 DPC Internal & DPN External coolant. 3D, 5D, 7D drills. 140 Tip angle, Reinforced shank. UNIX Coating. 內冷及外冷鑽 倍徑鑽孔深度 140 鑽尖, 銑刀柄高鋁鈦塗層技術 DDC for Steel 用於鋼料 Internal coolant. 10D, 15D, 30D, 40D deep drills. 135 Tip angle, Reinforced shank. UNIX Coating. 內冷深孔鑽 倍徑鑽孔深度 135 鑽尖, 銑刀柄高鋁鈦塗層技術 DLC & DLN for Steel 用於鋼料 DLC Internal & DLN External coolant. 3D, 4D mini drills. 130 Tip angle, Reinforced shank. UNIX Coating. 內冷及外冷小徑鑽 3 4 倍徑鑽孔深度 130 鑽尖, 銑刀柄高鋁鈦塗層技術 DMC for Stainless steel 用於不鏽鋼 Internal coolant. 3D, 5D drills. 140 Tip angle, Reinforced shank. SINIX Coating. 內冷不鏽鋼鑽 3 5 倍徑鑽孔深度 140 鑽尖, 銑刀柄含矽塗層技術 DHC & DHN for Pre-Hardened steel 用於預硬鋼 DHC Internal & DHN External coolant. 3D, 5D drills, HRC < Tip angle, Reinforced shank. SINIX Coating. 內冷及外冷高硬鑽 3 5 倍徑鑽孔深度 140 鑽尖, 銑刀柄含矽塗層技術 DGN for Steel 用於鋼料 External coolant. 3D, 5D drills. 130 Tip angle, Straight shank. UNIX Coating. 外冷鑽 3 5 倍徑鑽孔深度 130 鑽尖, 直柄高鋁鈦塗層技術 06
8 Holemaking Tools Indexable Holemaking Tools & others DZC & DZN for Steel 用於鋼料 DZC Internal & DZN External coolant. Step drills, customized available. Reinforced shank. UNIX, SINIX Coating available. 內冷及外冷鑽階梯鑽, 可客製化銑刀柄高鋁鈦或含矽塗層技術可供選擇 DTN for Steel 用於鋼料 90, 120, 140 Tip angle. Spotting drills for spotting, chamfering, countersinking, grooving, and engraving. Prevents tip cracking design 鑽尖可供選擇定位鑽可用於定位 倒角 錐孔 V 形槽 刻字等多種加工用途防止刀尖裂口設計 DSP Indexable Drill, SPMG insert 捨棄式鑽頭,SPMG 刀片 Internal coolant. 2D, 3D, 4D, 5D indexable drills. Diameter 12.5 ~ 50mm. Use SPMG insert. 內冷捨棄式鑽 倍徑鑽孔深度適用 12.5 ~ 50mm 孔徑加工使用 SPMG 刀片 DWC Indexable Drill, WCMT insert 捨棄式鑽頭,WCMT 刀片 Internal coolant. 2D, 3D, 4D, 5D indexable drills. Diameter 14 ~ 60mm. Use WCMT insert. 內冷捨棄式鑽 倍徑鑽孔深度適用 14 ~ 60mm 孔徑加工使用 WCMT 刀片 DTS Indexable Spotting drill 捨棄式 90 定位鑽 Multi-function : spotting, 45 chamfering, countersinking, grooving, and engraving. Prevents tip cracking design. Use SCMX09T3 insert. 可用於定位 45 倒角 錐孔 V 形槽 刻字等多種加工用途防止刀尖裂口設計使用 SCMX09T3 刀片 Dealer :
SSP 倒角刀系列 Chamfering Series
SS 倒角刀系列 Chamfering Series 特點 Features 特點 Feature 本銑刀適合 45 切削亦可倒角 V 槽切削 可 當定位鑽使用 Suitable for 45 cutting, chamfering, V grooving, and spotting. 使用一般銑床 CC 銑床 CC 車床 可利用於不同形狀倒角, 如 : 圓形 梯形 菱形 等 Could be applied
More informationWinCut series 捨棄式銑刀系列 Indexable Milling Tools Заказ инструмента: 8 (343) Vol.14A
WinCut series 捨棄式銑刀系列 Indexable Milling Tools Vol.14A COMPLETE PRODUCTION LINE 完整的生產流程 PRODUCTION LINE 生產流程Powder 粉末 Forming 沖壓 Sintering 燒結 Grinding 研磨 Coating 鍍層 Testing 測試 Product 成品 GRADE INTRODUCTION
More information400 PLUS series Unequal Flute Spacing & Helix 不等分割 & 不等螺旋 Excellent vibration absorption provides stability. 降低刀具加工時產生的震動頻率 Less chatter and high effi
400 PLUS series Unequal Spacing & Helix 不等分割 & 不等螺旋 Excellent vibration absorption provides stability. 降低刀具加工時產生的震動頻率 Less chatter and high efficiency finishing. 減少工件側壁的切削震紋 Reduce metal burr when machining.
More informationTable 3 CEP3-A 雙心徑不等分割型 ( 鍍膜 ) 切削條件表 ( 側銑粗加工 Side Milling Roughing) CARBON / ALLOY ALLOY / TOOL 預硬鋼 / PRE / 鈦合金 TITANIUM ALLOY 鎳基耐熱合金鋼 NI-BASED ALLOY
Table 1 CES2-A, CELF2-A, CECR2-A, CEI2-A, CER3-A, CETF2-A, CLES2-A, CEN2-A, CEFF2-A, CELS2-A 鎢鋼平銑刀 -2 刃 /3 刃 ( 鍍膜 ) 切削條件表 CARBON / ALLOY ALLOY / TOOL ALLOY / TOOL (S45C,S50C,SCM) (SCM,SKT,SKD) (SCM,SKT,SKD)
More information封面
鐸豐富 DOW FENG FUH 捨棄式刀具設計製造廠 THROW-AWAY CUTTING TOOL Spealized Design And Manufacturing 精湛製刀技術精雕細琢! 品質符合國際水準! Outstanding Tool Manufacturing Technology State-Of-The-Art production! Quality meets international
More informationS TOO HODRS OR CUTTING O & GROOVING CZ 內徑開槽刀架 本圖所示為右手刀 (R) Internal Grooving 材質Shank 加工徑 Min. ore Dia. Steel CZR/-20-2M CD6-60 CZR/-
S TOO HODRS OR CUTTING O & GROOVING CZ 內徑開槽刀架 本圖所示為右手刀 (R) Internal Grooving 材質Shank 加工徑 Min. ore Dia. Steel CZR/-20-2M 24 20 13 180 32 5 CD6-60 CZR/-20-3M 24 20 13 180 32 5 CZR/-25-3M 31 25 17 200 40
More informationmonalitDE_002.indd
MonAliT 70% 70mm 80mm MonAliT VDW-Technology Our diamond and boron nitride tools are manufactured using the new VDW-Technology. Diamond grains are strongly welded with each other. The diamond grain concentration
More informationCH 益詮切削刀具 CZ 內徑開槽刀架本圖所示為右手刀 (R) Internal Grooving 材質Shank 加工徑 Min. ore Dia. R D 1 ap CZR/-20-3M CD6-60 CZR/-25-3M
CH 益詮切削刀具 CZ 內徑開槽刀架本圖所示為右手刀 (R) Internal Grooving 材質Shank 加工徑 Min. ore Dia. R D 1 ap CZR/-20-3M 24 20 13 150 32 5 CD6-60 CZR/-25-3M 31 25 17 200 40 8 鋼CZR/-32-3M 39 32 22 250 50 10 CD6-60x20 CH Steel CZR/-20-4M
More information前搪刀(銅) 前搪刀 鍍鈦 鎢鋼半圓棒 鑽石刀系列 鑽石車刀 鑽石內孔刀 全鎢鋼銑刀 GTEM-鎢鋼點數銑刀 2 鏡面銅鋁用銑刀 全鎢鋼大小柄銑刀 2 鎢鋼T型刀 27 直刃型 螺旋型 鋸片刀桿 鋸片刀桿 2 超微粒鎢鋼小徑槽鋸片 29 鑚頭加工異常原因及對策 3
目 錄 INDEX 全鎢鋼螺旋鑽頭 GTR-鎢鋼鑽頭-同 GTRD-鎢鋼鑽頭-大小柄 GTR-鎢鋼鑽頭-加強柄 11 GTL-左旋鎢鋼鑽頭 13 全鎢鋼定位鑽 GTB-螺旋定位鑽 1 GTA-扁型定位鑽(右刃) 1 GTF-金字塔型定位鑽 1 GTA-L-扁型定位鑽(左刃) 17 全鎢鋼中心鑽頭 1 鎢鋼沖頭 六角型 19 內孔切槽刀 內孔牙刀 鍍鈦 前搪刀(銅) 前搪刀 鍍鈦 鎢鋼半圓棒 鑽石刀系列
More information捨棄式中心鑽 >> i-center 中心钻是 Nine9 全世界專利的發明商標 提供捨棄式刀片系統, 提昇您的加工性能 Features 世界第一的捨棄式中心钻縮短刀具設置及加工中心孔時間 壽命長, 成本低 高速切削, 高進給率 特殊刀片設計, 提升加工速度 例如 : 加工碳鋼中心孔, 轉速可達
捨棄式中心鑽 >> i-center 中心钻是 Nine9 全世界專利的發明商標 提供捨棄式刀片系統, 提昇您的加工性能 Features 世界第一的捨棄式中心钻縮短刀具設置及加工中心孔時間 壽命長, 成本低 高速切削, 高進給率 特殊刀片設計, 提升加工速度 例如 : 加工碳鋼中心孔, 轉速可達 6rpm 與 6mm/min. 進給率 (.1mm/rev.) 刀具更換便利 刀片軸向定位精準度於.5mm(.2
More informationCNC KINWA FLAT BED CNC LATHE CL-58x3000 CL-38/CL-58 Series Swing 660, 900mm Between centers 1000~6000mm Spindle bore 120,186,258,375mm Spindle motor 3
CNC KINWA FLAT BED CNC LATHE CL-8x000 CL-8/CL-8 Series Swing 660, 900mm Between centers 00~6000mm Spindle bore 1,186,8,7mm Spindle motor 0,40HP 14 CL-8x00,00,00,000,4000 CL-8x00,00,000,4000,000, C L8/C
More informationA SE Single Flute Endmills N O A SE Einzahn Fräser Operation Frese A SE 1 tagliente Fraises A SE à une dent A SE 系列立铣刀 - 1 刃 EP Ø N Z Helix Angle Flut
ENMIS Wide range of carbide endmills For Aluminium and non-ferrous materials This series includes endmills and ballnose A SE Single Flute Endmills N O A SE Einzahn Fräser Operation Frese A SE 1 tagliente
More information接线端子--Connectors规格书.doc
Connectors with/without wire protector high-temperature resistant* High grade flexible strips Resistant to temperature up to 100 C (to 140 C) Multiple approvals Raised base Available with or without wire
More informationCompany Introduction Nano-Mill Technology Co., Ltd has been established since year 00. It s specialized in exporting Carbide end mill from Taiwan.. We
1 Company Introduction Nano-Mill Technology Co., Ltd has been established since year 00. It s specialized in exporting Carbide end mill from Taiwan.. We created our brand Nano-mill and produce a wide range
More informationCNC_tools_catalogue
1 Flat Bottom Engraving Bits Material: AA series adopt for Germany K55UF Micro Grain Solid Carbide Good For:Acrylic,Two-color plate,mdf Mode 2T(Tip-size) 2A(Fullangle)))) SHK OVL AAJ3.1001 0.1 10 3.175
More information18-陈亚莉.FIT)
第 42 卷 第 4 期 2016 年 8 月 航 空 发 动 机 Aeroengine Vol. 42 No. 4 Aug. 2016 压 气 机 叶 片 型 面 精 密 数 控 铣 加 工 技 术 应 用 研 究 陈 亚 莉 1, 李 美 荣 2, 宋 成 2 ( 1. 空 军 驻 沈 阳 黎 明 航 空 发 动 机 ( 集 团 ) 有 限 责 任 公 司 军 事 代 表 室, 沈 阳 110043;
More informationmm 5 1 Tab 1 Chemical composition of PSB830 finishing rolled rebars % C Si Mn P S V 0 38 ~ 1 50 ~ 0 80 ~ ~
PSB830 365000 32 mm PSB830 PSB830 TG 335 64 A Productive Practition of PSB830 Finishing Rolled Rebars PAN Jianzhou Bar Steel Rolling Minguang Co Ltd of Fujian Sansteel Sanming 365000 China Abstract High
More informationWire Wound Ceramic Chip Inductor 繞線式陶瓷晶片大电流電感 HPWS Series for High Frequency HPWS 系列適用於高頻 INTRODUCTION 產品介紹 The HPWS is the chip inductors of a wire w
INTRODUCTION 產品介紹 The HPWS is the chip inductors of a wire wound type widely used in the communication applications, such as cellular phones, television tuners, radios, and other electronic devices. The
More informationPPTVIEW
New Product line GP series AD3828GP~ AD12038GP DS series AD3828DS~ AD9238DS AB series AB6015~ AB12032 AS series AS6076~ AS12038 GP series Great Performance Axial fan New design for higher airflow & low
More informationCL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm mm Spindle bore 181mm is standard. 255,5 or 5mm is option. Chuck is optional. You ca
CNC KINWA FLAT BED CNC LATHE CL-68x00 CL-68/CL-78 Series Swing 11, mm Between centers 00~7000mm Spindle bore 181, 255, 5, 5mm Spindle motor 60HP CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm
More information(\244u\245\363\273\241\251\372\245d0307 Yellow.xls)
PCD 四件配合組 (4-Piece Assembly) PCD 3 mm SKD-11 1 Pass 3 Passes 30 mm Ra 0.62µm ψ0.25 mm 43 mins ψ0.25 mm 3 hrs 44 mins 63.121 mm 736.524 mm 特殊材質切割 四件工件配合緊密度 Features Special Material Cutting Features Fitness
More informationNTC Series
NTC Series NTC Series NTC NTC IT 2 Y X Z C2 C1 B 高剛性結構底座設計 30: () X / Z() X Z 3 精密主軸設計 6"8"Ø51mm Ø65mm () C 0.001 ( ) kgf-m (15) 12.94 NTC-1600 6,000 rpm 15kW(15) 11kW(60) kw kgf-m 27.17 NTC-2000 5,000
More informationP120412_KO_+_ZH_P120412_IWC_2016_2017_KO_+_ZH-KO.pdf
SINCE 1936 (PILOT S WATCHES) IWC 1940 52 T. S. C. IWC 1936 IWC 4 55 mm 52 T. S. C. 1948 11(Mark 11) IWC (Royal Air Force) 30 IWC 1988 2003 (Spitfire) IWC 2006 (Antoine de Saint-Exupéry) 2007 (TOP GUN)
More informationTABLE OF CONTENTS.MACRO COMMAND...1.MACRO DESIGN...3.ALARM LIST...4.MACRO 1. HOLE PATTERN 1-1.LINE AT ANGLE GRID SQUARE BOLT
DAH LIH MACHINERY INDUSTRY CO., LTD. CUSTOM MACRO PROGRAMMING MANUAL FS-0M FS-18M FS-15M FS-18i/21iMB FS-0iMC/0iMD MELDAS-M520 R3-T23-014 VERSION 1.0 TABLE OF CONTENTS.MACRO COMMAND...1.MACRO DESIGN...3.ALARM
More information车槽切断铣槽插削仿形铣削铰削 新产品 切向铣削系统 409 多种规格供选择 NEW Tangential milling system 409 gains further variations HORN- 卓越于技术 HORN - EXCELLENCE IN TECHNOLOGY GROOVING PARTING OFF GROOVE MILLING BROACHING PROFILE MILLING
More informationall.pdf
1.30 1.50 0.35 0.50 0.03 0.03 0.20 0.50 750800 Slow Cooling 780820 Water Quenching HRC 63 Hv 780 1.10 1.30 0.35 0.50 0.03 0.03 750800 Slow Cooling 760820 Water Quenching HRC 63 Hv 780 INDEX ENGINEER'S
More informationspv_pintec_product_catalogue_2015_compendium_bt_english.pdf
Quick facts about SPV Spintec s hydraulic chucks! Why should you use SPV Spintec s hydraulic chucks? Permits machining with much closer toleranses. Quicker and simpler tool changes. Runout accuracy All
More informationPowerPoint 演示文稿
OMAT 1991 1993 OMAT 1995 OptiMil 1996 OptiMil 1998 OptilTurn 1999 OptiDrill 2001 OMAT 2002 OMAT-Pro, PC XL CNC OMAT CNC / / CNC NC Allen Bradley Deckel-Maho-Gildemeister Fadal Fagor Fanuc Fidia Haas
More informationRoller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.
Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. Fully enclosed splashguard for elegant outlook With standard flat-type removal mechanism. MEEHANITE cast iron for all
More informationMicrosoft Word - 301E高温样本封面.doc
无锡卓尔阀业有限公司 301E 三偏心高温 蝶阀 Triple Eccentric High Temperature Butterfly Valves STANDARD SPECIFICATION 301E GENERAL 301E Triple Eccentric High Temperature Butterfly valve 301E Triple eccentric high temperature
More information生 物 兼 容 性 检 测 项 目 包 含 如 下 : 敏 感 性 : 受 试 者 没 有 出 现 明 显 的 延 迟 性 皮 肤 接 触 性 敏 感 细 胞 毒 性 : 没 有 引 起 细 胞 溶 菌 和 毒 性 系 统 急 性 : 无 全 身 毒 性 反 应 或 死 亡 率 皮 内 反 应 :
PVD 镀 膜 在 医 疗 设 备 上 的 应 用 By Mark Pellman Rockaway, NJ 自 上 世 纪 80 年 代 末 物 理 气 相 沉 积 (PVD) 工 艺 进 入 到 医 疗 设 备 领 域, 就 广 泛 应 用 在 各 种 医 疗 设 备 上 沉 积 耐 磨 性 薄 膜, 包 括 骨 科 植 入 体, 电 子 起 搏 器, 手 术 仪 器, 牙 齿 矫 正 器 和
More information1.30 1.50 0.35 0.50 0.03 0.03 0.20 0.50 750800 Slow Cooling 780820 Water Quenching HRC 63 Hv 780 1.10 1.30 0.35 0.50 0.03 0.03 750800 Slow Cooling 760820 Water Quenching HRC 63 Hv 780 INDEX ENGINEER'S
More informationLMA 連座線性軸承 Standard Type Linear Block (Linear Ball Bearing Type) 軸線性軸承主要尺寸裝配尺寸重量徑 Linear ball bearing 型號 Nominal 基本動基本靜 Main dimensions Mounting dimen
LMA 連座線性軸承 Standard Type Linear Block (Linear Ball Bearing Type) 軸線性軸承主要尺寸裝配尺寸重量徑 Linear ball bearing 基本動基本靜 Main dimensions Mounting dimensions Weight 定格荷重定格荷重 diamet er dynamic static Model NO. mm h
More informationHigh Precision & Excellent Performance LILIAN, the leading milling machine builder in Taiwan, was established in 1978 and has built more than twenty t
AMTRI VERITAS Vertical Machining Center http://www.lilian.com.tw High Precision & Excellent Performance LILIAN, the leading milling machine builder in Taiwan, was established in 1978 and has built more
More informationuntitled
車 Lathe 切 車 Lathe 歷 車 車 不 料 兩 拉 拉 Collect 車 行 車 切螺 切 車 車 力 輪 headstock 車 tailstock 車 不 度 來 輪 力車 螺 車 螺 lead screw 精 螺 車 行 度 輪 力 連 螺 feed rod 力 車 車 滑 carriage assembly apron 車 良 精 車 Turning Tools 車 A 切 B
More informationLED Mu-Tao Chu Copyright 2012 ITRI
LED Mu-Tao Chu 1 LED LED LED 2 LED LED LED LED100 lm/w LED 2015LED~30% 400LEDLED DOE LED Source: Solid-State Lighting Research and Development: Multi-Year Program Plan, March 2011, DOE LED LED LED OEMODM
More information《医学英语》教学大纲
医 学 英 语 教 学 大 纲 课 程 名 称 : 医 学 英 语 Medical English 开 课 ( 二 级 ) 学 院 : 外 语 教 学 中 心 课 程 性 质 : 必 修 课 学 分 :4 分 学 时 :56 学 时 前 期 课 程 : 大 学 英 语 授 课 对 象 : 本 科 生 七 年 制 学 生 考 核 方 式 : 考 试 课 程 简 介 : 医 学 英 语 是 中 医 英
More informationTel:(852) Fax:(852) Truss Rivet Semi Tubular Rivets 尾孔 Truss Rivets 扁圓頭 JIS B1215 unit : mm diameter d Basic s
Tel:(852)2896 391 Fax:(852)2897 357 Thin Round Rivet Semi Tubular Rivets 尾孔 Thin Round Rivets 薄圓頭 JIS B1215 unit : mm diameter 1.2 1.6 2 2.5 3 4 5 6 8 d Basic size 1.2 1.6 2 2.5 3 4 5 6 8 -.5 -.6 -.8 -.1
More information1-2
B B 90 80 0 0 0 模組化搪刀系統 MODUAR BORING SYSTEM SERIES Ø~Ø 大徑系列 BORING SYSTEM P3 以上 PBH 組合式大徑微調精搪刀 arge Diameter Finish Boring Head 平衡滑塊 Balance 微調滑塊 Finish Head P P Ø~Ø 連接盤 Flange 橫向滑板 Extension Slide 外圓滑塊
More information[1-3] (Smile) [4] 808 nm (CW) W 1 50% 1 W 1 W Fig.1 Thermal design of semiconductor laser vertical stack ; Ansys 20 bar ; bar 2 25 Fig
40 6 2011 6 Vol.40 No.6 Infrared and Laser Engineering Jun. 2011 808 nm 2000 W 1 1 1 1 2 2 2 2 2 12 (1. 710119 2. 710119) : bar 808 nm bar 100 W 808 nm 20 bar 2 000 W bar LIV bar 808 nm : : TN248.4 TN365
More informationWilmad NMR Book-chinese.pdf
Wilmad 1 Committed to Product Excellence and Continuous Support 2 www.wilmad-labglass.com Wilmad 3 Committed to Product Excellence and Continuous Support 4 www.wilmad-labglass.com Wilmad 5 Committed to
More informationRatings Specifications Outstanding Environmental Performance The body resin used by the BOXTC series is a reinforced PBT, which is PBT resin with high
Box Terminal TOGI s Box Terminals are the choicest terminal boxes for cable connection of industrial equipment, such as machine tool control, switching, power distribution and instrumentation equipment.
More informationLayout 1
Hydraulics FITTINGS PRODUCT INDEX The comprehensive range of Hydraulic Hose Fittings supplied by Pirtek includes products which are suitable in skive and non-skive applications for use on low, medium,
More informationSpot Drill / Chamfer Mill + Inserts SET 定點鑽 / 倒角刀刀具組 刀架 NT650 / 支 刀片 NT240 / 片 Characteristic 特點 : 1.For general chamfering and NC spot drilling. 可廣泛應
Declaration of New Price 新價格宣言 Spot Drill / Chamfer Mill + Inserts SET 定點鑽 / 倒角刀刀具組 刀架 NT650 / 支 刀片 NT240 / 片 Characteristic 特點 : 1.For general chamfering and NC spot drilling. 可廣泛應用於倒角加工及 NC 定點鑽 2.The
More informationOur Mission ICAPlants has been working since a long time in industrial automation, developing specific solutions for many industrial purposes to satis
Tyres Assembly Systems Our Mission ICAPlants has been working since a long time in industrial automation, developing specific solutions for many industrial purposes to satisfy Customers worldwide. Our
More informationBC04 Module_antenna__ doc
http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 1 of 10 http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 2 of 10 http://www.infobluetooth.com TEL:+86-23-68798999
More informationMicrosoft Word - P SDFL series.DOC
片式铁氧体电感 SDFL 系列 Chip Ferrite Inductor SDFL Series Operating Temp. : -40 ~ +85 特征 迭层独石结构 高度可靠性 体积小 良好的磁屏蔽, 无交叉耦合 无引线结构, 适合表面安装 良好的可焊性和耐焊性 适合于流焊和回流焊用途 可用来抑制电子设备中的电磁干扰, 广泛的运用于通讯 视频 / 音频 计算机 遥控器等领域 FEATURES
More information001Contents
Selection Guide Inductions of types Selection guide Contents 002 003 Standard capacitive sensors DC series AC series 008 024 Special capacitive sensors High temperature series Ring series 029 035 Accessories
More informationMS24264 连接器
DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R Inactive for new design for 14 November 1977.For new design, use MIL-DTL-83723, series III,
More information中國文化大學政治學研究所
中 國 文 化 大 學 社 會 科 學 院 政 治 學 系 碩 士 論 文 Department of Political Science College of Social Sciences Chinese Culture University Master Thesis 台 灣 中 小 企 業 赴 大 陸 投 資 風 險 及 其 因 應 之 道 Investment Risks and its
More informationMicrosoft PowerPoint - ryz_030708_pwo.ppt
Long Term Recovery of Seven PWO Crystals Ren-yuan Zhu California Institute of Technology CMS ECAL Week, CERN Introduction 20 endcap and 5 barrel PWO crystals went through (1) thermal annealing at 200 o
More information8016_2_1page
VARICONTM PART NUMBERING SYSTEM 00 NO. NUMBER OF CONTACTS 20=020, 38=038, 56=056, 90=090, 120=120 CONTACT CODE INSULATOR V=Standard Type HV=For High Voltage ( ) ( NO. OF CONTACTS) 20,38,56,90,120 (PITCH
More informationdecomagazine 86 CHN web sup.pdf
deco magazine 86 04-2018 Tornos SwissDeco : Teixidó : Partmaker : 14 26 30 46 25multidec Utilis AG, Precision Tools Kreuzlingerstrasse 22, CH-8555 Müllheim, Switzerland Phone + 41 52 762 62 62, Fax + 41
More information序 言 不 大 老 师 说 : 我 们 的 学 校 称 作 梦 中 梦 幼 稚 园, 却 与 其 它 学 校 有 所 不 同 这 是 一 所 专 门 的 幼 稚 园, 独 树 一 帜, 不 分 男 女 老 少 都 同 班 上 课 创 办 这 所 学 校 是 为 了 教 导 佛 法 知 识 阐 明 佛
序 言 不 大 老 师 说 : 我 们 的 学 校 称 作 梦 中 梦 幼 稚 园, 却 与 其 它 学 校 有 所 不 同 这 是 一 所 专 门 的 幼 稚 园, 独 树 一 帜, 不 分 男 女 老 少 都 同 班 上 课 创 办 这 所 学 校 是 为 了 教 导 佛 法 知 识 阐 明 佛 陀 的 教 育, 让 学 子 们 能 够 明 了 今 生 与 来 生 之 间 的 关 系 因 此,
More informationIdentification System of insert
MiLLING Tools MiLLING Tools MAROX TOOLS INDUSTRIAL CO. LTD. End mills Face mills Side mills Cartridges Identification System of insert Identification System of insert Identification System of cartridge
More informationMicrosoft PowerPoint - ATF2015.ppt [相容模式]
Improving the Video Totalized Method of Stopwatch Calibration Samuel C.K. Ko, Aaron Y.K. Yan and Henry C.K. Ma The Government of Hong Kong Special Administrative Region (SCL) 31 Oct 2015 1 Contents Introduction
More information2018 手册封面以及内页 Print--刹车系统
ESHOP.WUERTH.CN www.wuerth.cn eshop.wuerth.cn APP Store SYSTEM REFILLO REFILLO REFILLO REFILLO REFILLO ORSY ORSY ORSY ORSY ORSY ORSY SHELFSYSTEM ORSY mat, Brake System Tyres Chassis Puller CONTENT BRAKE
More informationp00.cdr
FLEXIBLE COUPLING Model SCT SCT-C SCTS SCTS-C SCP SWS SWS-C SWSS SWSS-C SRJ SRJ-C Material Aluminium Aluminium S/Steel S/Steel Plastic Aluminium Aluminium S/Steel S/Steel Aluminium Aluminium Locking Style
More informationBN G Solid carbide milling cutters with DIAMOND or T AC (DLC) PVD coating. For material application eg: graphite. Application Coating ecess Weldon EDP
BN G Solid carbide milling cutters with DIAMOND or T AC (DLC) PVD coating. For material application eg: graphite. Application Coating ecess Weldon EDP Page * * 7* 7* 70* 7* BN G Standard Ballnose Cutters
More informationMicrosoft Word - P SDV series.DOC
片式压敏电阻器 SDV 系列 Chip SDV Series Operating Temp. : -55 ~ +125 特征 SMD 结构适合高密度安装 优异的限压比, 响应时间短 (
More information不同工作週期對直流脈衝電漿化學氣相沉積法蒸鍍 DLC 薄膜於氮氧化處理 JIS SKD11 工具鋼之研究 Characteristics of DLC Films Coated on Oxynitriding-treated JIS SKD11 Tool Steel S.H. C
不同工作週期對直流脈衝電漿化學氣相沉積法蒸鍍 DLC 薄膜於氮氧化處理 JIS SKD11 工具鋼之研究 Characteristics of DLC Films Coated on Oxynitriding-treated JIS SKD11 Tool Steel 1 2 3 4 5 S.H. Chang, C.R. Huang, C.M. Liu, C.K. Peng, C.C. Yu JIS
More informationSHIMPO_表1-表4
For servo motor ABLEREDUCER L Series Features Coaxial shaft series L series Helical gears contribute to reduce vibration and noise. Standard backlash is 5 arc-min, ideal for precision control. High rigidity
More information運動表現與媒體曝光率關聯性探討-以民生報報導中華職棒為例
14 2003 14 2003 6 1995 1 Coakley, 2001, 335-336 1998 2001a 2002 2003 2003 2001b 1997 1996 6 1995 14 2003 6 1995 5 26 26 2 2003a 14 2003 14 2003 6 96 110 2003b2003c2003d 1980 1985 1992 1996 1997 7 1996
More information4.492 Daylighting in Buildings Class01
Light emission incandescence vs. luminescence Lamp types Incandescent (classic, halogen) Discharge (fluorescent tubes) Electrodeless (induction-based) 8 Natural light 7 Low pressure sodium 6 High pressure
More informationindd
铣削加工 Milling C6535/PR1535 耐热合金 难切削材用铣削材质 C6535/PR1535 For Milling of Heat Resistant lloy 2 种材质可对应广泛的 加工形态 2 types of grades suitable for variety of workpiece materials and applications C6535:CVD 涂层 ( 镍基耐热合金
More informationYuandong-hawks Ball valve cdr
Yuandong 奉化市远东车辆部件有限公司 Fenghua Yuandong Auto Parts imited Company 奉化市哈克斯自动化设备有限公司 Fenghua awks Automatic Equipment imited Company igh Pressure Ball Valve igh pressure Ball valve is mainly used in the hydraulic
More information我们志愿成为您工业创新之路上的好伙伴 Automotive MZ120 Gear hobbing and worm milling machine Max module 1.0 MZ130 Gear hobbing and worm milling machine Max module 1.5 M644 Cnc Duplex worm milling machine Max module 2.5
More informationPin Configurations Figure2. Pin Configuration of FS2012 (Top View) Table 1 Pin Description Pin Number Pin Name Description 1 GND 2 FB 3 SW Ground Pin.
Features Wide 3.6V to 32V Input Voltage Range Output Adjustable from 0.8V to 30V Maximum Duty Cycle 100% Minimum Drop Out 0.6V Fixed 300KHz Switching Frequency 12A Constant Output Current Capability Internal
More informationUrban lighting LUNIOSTREET arcluce.it lunio-street 294
Urban lighting 294 LUMINIRE Die-cast aluminium body (EN 47100). Double layer polyester powder paint resistant to corrosion and salt spray fog. Silicone rubber gaskets. ISI 316 stainless steel external
More informationWTO
10384 200015128 UDC Exploration on Design of CIB s Human Resources System in the New Stage (MBA) 2004 2004 2 3 2004 3 2 0 0 4 2 WTO Abstract Abstract With the rapid development of the high and new technique
More information8260
ASCO Stainless Steel Spool Valves Manually Operated and Main Supply Reset Valves Pilot Operated 316L Stainless Steel Bodies 1/4" NPT 3/2 Features Ideal for oil and gas control panel applications Drop-in
More informationLED/Smart TV LED/ Function List Products \ Application Tuner block DSP block / I/O Voice/Aud
LED/Smart TV LED/智慧電視 www.passivecomponent.com 1 www.passivecomponent.com LED/Smart TV LED/ Function List 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Products \ Application Tuner block DSP block / I/O Voice/Audio
More information转 变 思 路, 迎 接 新 挑 战 2016 年 5 月 13 日 新 闻 综 合 第 2 版 努 力 付 出 收 获 在 过 去 的 2015 年, 泵 项 目 组 在 大 家 的 支 持 和 配 合 下, 用 户 业 绩 增 多 了, 我 们 的 能 力 提 高 了, 大 家 的 经 验 更
近 日, 公 司 收 到 由 山 东 省 科 学 技 术 厅 山 东 省 财 政 厅 山 东 省 国 家 税 务 局 山 东 省 地 方 税 务 局 联 合 颁 发 的 高 新 技 术 企 业 证 书, 有 效 期 : 三 年 自 2009 年 首 次 通 过 认 定 以 来, 每 三 年 一 次 认 定, 本 次 是 公 司 原 高 新 技 术 企 业 证 书 有 效 期 满 所 进 行 的 重
More information/ / Turnkey Test & Automation Solution Provider
/ / www.chromaate.com Turnkey Test & Automation Solution Provider 1984Chroma Turnkey LED /IC (Wafer) (Cell) (Module) I-V / (Sorting) Model 3710-HS Chroma 3710-HS 2D Thickness Lifetime 5 6 0.1% 2D Resistively/Thickness
More informationGH1220 Hall Switch
Unipolar Hall Switch - Medium Sensitivity Product Description The DH220 is a unipolar h all switch designed in CMOS technology. The IC internally includes a voltage regulator, Hall sensor with dynamic
More information1. 前 言 由 於 石 油 價 格 浮 動, 汽 油 價 格 節 節 高 升 及 二 氧 化 碳 等 廢 棄 大 量 排 放 造 成 全 球 環 境 的 改 變, 因 此 世 界 各 國 都 極 力 提 倡 節 能 減 碳 進 而 掀 起 腳 踏 車 城 市 的 風 潮 因 應 目 前 自 行 車
JHGT-18.2(158) (2011-07) 華 岡 紡 織 期 刊 第 十 八 卷 第 二 期 ISSN 1025-9678 不 同 吸 濕 排 汗 織 物 應 用 於 自 行 車 衣 之 研 究 Study of Wicking Fabrics Used in Different Research Bicycle clothing 摘 要 曾 冠 臺, 李 貴 琪, * 游 輝 仁 G. T.
More information城市建设与构建和谐城市的探究
城 市 设 计 导 则 与 建 筑 集 群 设 计 的 滨 海 实 践 天 津 未 来 科 技 城 渤 龙 湖 总 部 经 济 区 城 市 设 计 实 施 综 述 王 靖 摘 要 本 文 通 过 对 天 津 未 来 科 技 城 渤 龙 湖 总 部 经 济 区 城 市 设 计 城 市 设 计 导 则 及 建 筑 集 群 设 计 的 过 程 回 顾, 突 显 了 城 市 设 计 导 则 在 指 引 建
More information新品情報 New Products 捨棄式刀片 Indexable Insert 提供您更完整的切削系統 COMPLETE CUTTING SOLUTION 高精度 High Accuracy 研磨級 Precision Ground 1 特殊刀型設計 + 強化刃口崩角設計, 使刀具有最大的鋼性,
新品情報 New Products 捨棄式刀片 Indexable Insert 提供您更完整的切削系統 COMPLETE CUTTING SOLUTION 高精度 High Accuracy 研磨級 Precision Ground 1 特殊設計 + 強化刃口崩角設計, 使刀具有最大的鋼性, 同時擁有最大的有效排屑空間 Maximized rigidity, and chip removals are
More informationuntitled
Bussmann 电路保护解决方案 Circuit Protection Solutions General Introduction Bussmann... innovative circuit protection Circuit Overload...Electrical and electronic systems can experience it. And so can people.
More informationiml88-0v C / 8W T Tube EVM - pplication Notes. IC Description The iml88 is a Three Terminal Current Controller (TTCC) for regulating the current flowi
iml88-0v C / 8W T Tube EVM - pplication Notes iml88 0V C 8W T Tube EVM pplication Notes Table of Content. IC Description.... Features.... Package and Pin Diagrams.... pplication Circuit.... PCB Layout
More informationBuilding Technology Experience Center concept air conditioning concept heat pump special energy-saving techniques in hydraulics Concrete core conditio
Building Technology Experience Center concept air conditioning concept heat pump special energy-saving techniques in hydraulics Concrete core conditioning Initial situation Passive House Technology Experience
More information連鑄熱作模具鋼 H13 的技術開發 Development of Continuous Cast H13 Hot-die Steel C.Y. Chen, K.L. Chang, C.Y. Wu, Y.J. Chen H13 [P], [S] H13 H13 H13 / H13 H1
連鑄熱作模具鋼 H13 的技術開發 Development of Continuous Cast H13 Hot-die Steel 1 1 2 3 C.Y. Chen, K.L. Chang, C.Y. Wu, Y.J. Chen H13 [P], [S] H13 H13 H13 / H13 H13 H13 tool steels have been manufactured almost exclusively
More informationSegment Surface Solutions Oerlikon Balzers
BALINIT 新涂层助力齿轮加工 15 th July 2016 金敏 Company Overview Four core competencies 公司概况 四大核心竞争力 Segment Surface Solutions 表面处理事业板块 Segment Manmade Fibers 化学纤维事业板块 Segment Drive Systems 传动系统事业板块 Segment Vacuum
More information. Land Patterns for Reflow Soldering.Recommended Reflow Soldering Conditions (For Lead Free) TYPE PID0703 PID0704 PID1204 PID1205 PID1207 PID1209 L(mm
.Features: 1.Magnetic Shielded surface mount inductor with high current rating. 2.Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in
More information史 以 往 有 關 台 灣 空 襲 的 記 載 或 回 憶, 甚 少 提 及 在 夜 間 進 行 的 部 分 事 實 上, 第 5 航 空 隊 是 以 夜 間 騷 擾 轟 炸 展 開 空 襲 台 灣 的 序 幕, 即 使 後 來 都 集 中 在 日 間 攻 擊 台 灣, 夜 間 轟 炸 任 務 依
前 言 本 書 所 記 載 的 空 襲, 是 美 國 為 首 的 同 盟 國 飛 機 在 太 平 洋 戰 爭 期 間, 對 日 本 統 治 下 的 台 灣 與 澎 湖 發 動 的 空 中 攻 擊 行 動 除 了 由 轟 炸 機 群 或 掛 載 炸 彈 的 戰 鬥 機 所 執 行 的 轟 炸 (Bombing) 任 務 之 外, 各 型 飛 機 在 掃 蕩 (Sweep) 打 擊 (Strike) 目
More information二. 當 我 在 神 的 律 法 前 失 敗 時, 所 要 面 對 的 刑 罰 審 判 結 果 是 什 麼? 第 二 個 重 要 的 觀 念 就 是 : 主 已 經 說 過 了, 他 來 不 是 要 廢 掉 律 法 17 到 20 節, 我 上 禮 拜 說 過 邑 很 重 要 的 主 說 : 我 來
馬 太 福 音 預 查 第 五 章 第 21-48 節 講 員 : 于 宏 潔 今 天 我 們 要 讀 馬 太 福 音 第 五 章 的 後 半 段 這 一 章 聖 經 不 容 易 讀, 必 須 很 快 地 cover( 涵 蓋 ) 幾 個 很 重 要 的 點 至 於 life application( 應 用 到 生 活 中 ) 的 題 目 就 要 請 你 們 小 組 長 們 自 已 去 設 計 了
More informationMicrosoft Word - Small CNC Lathe and Milling Machine.doc
Mini Precision CNC Lathe:PL01 CNC 名 称 : 铝 合 金 精 密 数 控 车 床 ( 教 学 数 控 车 床 ) 单 击 以 下 图 片 进 行 放 大 本 机 特 点 : 1 本 机 功 能 强 大, 使 用 简 便, 适 应 面 广, 高 效 实 用 性 价 比 高 2 高 性 能 的 基 于 Window s 的 开 放 式 计 算 机 数 控 系 统, 既
More informationg 100mv /g 0. 5 ~ 5kHz 1 YSV8116 DASP 1 N 2. 2 [ M] { x } + [ C] { x } + [ K]{ x } = { f t } 1 M C K 3 M C K f t x t 1 [ H( ω )] = - ω 2
10 2016 10 No. 10 Modular Machine Tool & Automatic Manufacturing Technique Oct. 2016 1001-2265 2016 10-0012 - 05 DOI 10. 13462 /j. cnki. mmtamt. 2016. 10. 004 * 116024 MIMO TH166 TG502 A Dynamic Performance
More informationA B
ICS 77.140.01 H 40 GB GB/T 20566-2006 Terminology of steel and alloy 2006-11-01 2007-02-01 A B 1 2 GB/T 13304 GB/T 13304-1991,neq ISO 4948/1 1982 Steel-classification-Part 1 classification of steels into
More informationMnq 1 1 m ANSYS BEAM44 E0 E18 E0' Y Z E18' X Y Z ANSYS C64K C70C70H C /t /t /t /mm /mm /mm C64K
25 4 Vol. 25 No. 4 2012 12 JOURNAL OF SHIJIAZHUANG TIEDAO UNIVERSITY NATURAL SCIENCE Dec. 2012 1 2 1 2 3 4 1 2 1. 050043 2. 050043 3. 3300134. 450052 ANSYS C80 C80 125 ac70 0 U24 A 2095-0373201204-0017-06
More information888 886-4-2562-3211 886-4-2561-2965 sales@ 886-4-2562-6479 886-4-2561-2966 886-4-2562-8399 042010-C01-2000 1 CNC TC-46TC-46 TC-46 2 FEM 45 9mm Z 620mm TC-46 ø7mm TC-46/1000 TC-46/16 TC-46/2300 TC-46/3200
More informationoving-goods Precision Racks
oving-goods Precision Racks 08 2.3 直齿磨削齿条, 压力角 20 Ground racks with straight teeth, pressure angle 20 L Holes Error 11 11 015 050 1.5 499.51 106 17 17 15.5 62.44 124.88 4 8 6 9.5 7 29 441.5 5.7 0.021
More informationMicrosoft PowerPoint - 工具機工程(ALL).ppt
Machine tools ( 工 具 機 ) 車 床 CNC 車 床 手 動 三 軸 工 具 機 Z 軸 Y 軸 X 軸 CNC 三 軸 工 具 機 Z 軸 Y 軸 a 軸 b 軸 X 軸 龍 門 式 雙 軸 同 動 技 術 史 都 華 六 軸 平 台 Section A Introduction 1 SHOP SAFETY Identify and use common shop safety
More information16B.indb
2015~2016 Cutting Tools Catalogue Vol.16B Winstar Cutting Technologies Corp. Is a Taiwanese company that starte operations in the year 2008 by Tim Chen following a ream an personal interest in eveloping
More information第 二 章 古 代 慢 慢 睁 开 眼 睛, 我 的 面 前 出 现 一 个 女 孩 子, 大 约 十 六 七 岁, 身 穿 淡 绿 色 布 裙, 头 上 两 个 小 圆 髻 特 别 娇 俏 可 爱 医 院 什 么 时 候 出 现 这 么 一 个 可 爱 的 古 装 护 士 啊! 这 医 院 真 有
迷 糊 妻 主 : 夫 君 太 妖 孽 / 作 者 : 小 骨 头 第 一 章 穿 越 今 天 又 是 解 剖 课, 作 为 一 名 医 学 生, 对 此 我 表 示 万 分 头 痛! 怪 只 怪 当 初 高 考 差 了 几 分, 远 离 最 爱 的 文 学 专 业 而 去 学 医! 想 当 初 鲁 迅 先 生 弃 医 从 文, 我 这 是 与 伟 大 的 学 者 思 想 家 背 道 而 驰 啊!
More informationuntitled
2005...8...8...8...9...10...10...10...10...10...10...10...11...11...11...11...11...11...11...12...12...12...12...12...13...13...13...13...13...13...14...14...14...14...14...15...15...15...15...16...16
More informationCMOS线性响应测试
应 用 CMOS 高 亮 度 天 文 测 光 CMOS-based High Intensity Photometry in Astronomy 项 目 完 成 人 : 童 仲 毅 俞 雯 萱 田 哲 毅 指 导 老 师 : 林 岚 杭 高 天 文 台 二 〇 一 一 年 八 月 II 摘 要 本 课 题 基 于 人 造 星 点 测 光 实 验 和 验 证 性 天 文 拍 摄 实 验, 旨 在 探
More information