1.0 Features Wireless receiving heartbeat signal transmitted from heartbeat brooch, chest band frequency is AM5.3KHz; Time display: Hour, Minute, Seco

Size: px

Start display at page:

Download "1.0 Features Wireless receiving heartbeat signal transmitted from heartbeat brooch, chest band frequency is AM5.3KHz; Time display: Hour, Minute, Seco"

分寿
5 years ago
Views:

2 1.0 Features Wireless receiving heartbeat signal transmitted from heartbeat brooch, chest band frequency is AM5.3KHz; Time display: Hour, Minute, Second; Alarm clock function; Give alarm when heart rate exceeds the upper and lower limit values(60~220). Timing (maximum time-keeping is 23 hours, 59mimutes, 59 seconds, 99) 12/24 hour displaying format EL backlight Keystroke tone 50 meters waterproof

3 2.0 Instructionsforbuttons 3.0 ProductFunctionMode

4 3.1 PresskeyAinanymode,ELbackground will light for 3 seconds. 3.2 Time Mode Innormaltimemode,presskeyBto enteralarmmode;presskeydtoenter heart monitoring mode; Press key D again to stop timing and display average heartrateandtimedtime2seconds each alternately. In timing stopped mode, presskeydfor2secondstoclearthe timedtimeandheartratevalue,thenit will return to normal time mode automatically. Time Setting: In time mode, press and

5 holdkeycfor3secondstoaccessto upperandlowerlimitssettingoftimeand heart rate(heart rate range is 60~220). When numerical value flashes, press key D to adjust the flashing value; Innormaltimesettingmode,itwillexit and return normal time mode automatically if without any operation within 60 seconds. 3.3 Alarm Mode Inalarmmode,presskeyDto enable/disable alarm( ) and Hour

6 Announcement( )symbol in turn. Whenthesettimeisreached,thealarm tone will stop automatically after ringing for30secondsorstopbypressingany key. symbolflasheswhenalarmtone is heard. Alarm Setting: In alarm mode, press keyconcetoenteralarmsettingmode. First, Hour flashes. Press key D to adjustthehour;thenpresskeyctoflash minute,andpresskeydtoadjustthe minute; finally, press key C to exit setting mode. Inalarmsettingmode,itwillexitand

7 return normal time mode automatically if without any key operation within 60 seconds. 3.4 Heart Monitoring Mode In normal time mode, press key D once to start timing, and at the same time, heart monitoring starts. There will be BB alarm tone when out-of-limit heart rate is measured. During timing process, press key D once to stop timing. It

8 displays average heart rate value and timed time for 2 seconds each alternately. In heart monitoring mode, when heart rate signal is received, it updates the heart rate value about every 5 seconds; Without heart rate signal, it enters power saving mode 5 seconds later, and heart rate value displays as zero, heart rate symbol disappears. In timing stop mode, press key D to continue with timing. Intimingstopmode,pressandholdkey Dfor2seconds,thetimedtimeandheart

9 ratevalueareresettozero.thenitexits and returns to normal time mode automatically. 3.5 Use Instruction on Heartbeat Chest Band: To wear chest band, face the battery cover of the chest band emitter down, then adjust the emitter at center of your chest. The chest band is used to record heart beatnumberandtransferthedatatothe wrist watch. Please pay attention to the following when wear your chest band: 1. Get the conductive mat on inner side

10 ofthechestbandwetwithseveraldrops of water or conductive gel to ensure good contact. 2. Wearthechestbandaloneyourchest. To ensure accurate heart rate signal, please adjust the binding belt properly and make you chest comfortable.

11 Heart rate signal can be transferred within 2 seconds after chest band being worn.nowyoucanreceiveheartrate valueinheartmonitoringmode. flashes when heartbeat signal is received. Tips: Thelocationofchestbandmayaffectits performance. Please move the chest band alone the binding belt to make it locate above your heart. Avoid wear your chest band at the position with bushy sternal seta. In dry and cold weather, it may take

12 several seconds for chest band to perform normally. This is normal phenomenon. After several seconds heating up, it will perform better. As illustrated below, you can either wear yourwristwatchonyourwristorfixiton bicycle or exercise machine with a distance 65cm from chest band emitter.

13 Troubleshooting: Ifnoheartratevaluecanbereceived2 minutes later after chest band being worn, it may be insufficient battery voltage or the dry and cold environment. Solution: 1 try replacing battery. 2Wipeyourchestwithdrinkingwateror conductive gel.

14 4.0 QualityStandard Movement size: Φ33.2 mm Thickness: 9.35±0.15 mm Work temperature: -10 ~+60 Work voltage: 3V Veracity: ±90 seconds/month Battery type: CR2032 Static maximum drive current: 3.5 u A (T=25 ) Static average drive current: 2.5 u A (T=25 ) Heartbeat monitoring current: 30 u A (T=25 ) EL lighting current: 10.0 m A Alarm ring current: 2.5 m A

15 Battery Life term: 36 months(japan battery) (El lighting twice per day, alarm ringing once everydayfor30secondseachtime;heartrate measuring for 1hour.) Attachment: Chest Band Quiescent Current: 1.0 u A(T=25 ) Emission Transient Current: 4.5 m A (T=25 ) Emission Average Current: 0.4 m A (T=25 ) Emission Distance: 65 cm Battery life term: 14 months(japan Battery) (Calculate by using one hour per day.)

16 1.0 功能简介无线接收心跳胸带传送的心跳信号, 胸带频率为 AM 5.3KHz; 时间显示 : 时分秒 ; 闹铃功能 ; 心率超出上限值报警功能 (60~220); 计时功能 ( 最大计时 23 小时 59 分 59 秒 99) 12/24 小时制 EL 背光按键音 50 米防水

17 2.0 按键 3.0 操作及显示

18 3.1 任意模式下按 A 键 EL 背光亮三秒 3.2 时间模式在正常时间模式按 B 键进入响闹模式 ; 按 D 键进入心跳测量模式 ; 再按 D 键停止计时并轮流显示平均心率和计时时间各 2 秒 ; 停止计时状态按住 D 键 2 秒计时与心率值清零后自动返回正常时间模式时间设置 : 在时间模式 ; 按住 C 键 3 秒进入时间与心率上限设置 :( 心跳上限值设置范围 60~220) 当数值闪动的时候按 D 键调整闪动的数值 ; 在正常时间设置模式下, 若在 60 秒内无任何按按操作则自动退出返正常时间模式

19 3.3 响闹模式在闹钟模式时按 D 键轮流选择开启或关闭闹铃 ( ) 符号及整点报时 ( ) 符号当到达设置时间时, 响闹 30 秒后自动停止或按任一键停止响闹, 响闹时会有符号闪动闹钟设置 : 在响闹模式按一次 C 键进入闹钟设置, 首先小时闪动, 按 D 键调整数值 ; 再按 C 键分钟闪动, 按 D 键调整数值 ; 再按 C 键退出设置模式在闹钟设置模式下, 若在 60 秒内无任何按按操作则自动退出返正常时间模式 3.4 心跳测量模式

20 在正常时间模式按一下 D 键开始计时, 同时心跳测量也跟着在进行, 当测到心跳频率超出上限值时有 B B 声报警在计时进行中按一下 D 键停止计时并轮流显示平均心率值和计时时间各 2 秒在心跳测量模式, 接收到心跳信号时约 5 秒钟自动更新一次心率值 ; 若无心跳信号时 5 分钟后自动进入省电模式, 心率值显示零, 心跳符号消失在计时停止状态按一下 D 键继续计时在计时停止状态按住 D 键 2 秒计时时间与心率值清零 ; 后自动退出到正常时间模式

21 3.5 心跳带使用说明 : 准备带上胸带时, 将胸带的发射器电池门朝下面然后插上带扣, 调节胸带发射器在胸部正中位置心率胸带是用作记录心跳, 并将数据传送给腕表的, 当穿胸带时请注意下列几点 : 1 用几滴水或导电凝胶, 把胸带内侧的导电垫弄湿, 以确保有良好的接触 2 沿着胸部穿上胸带, 为了确保有准确的心率信号, 请适当调节绑带, 使胸带舒适地套在胸肌的下方

22 当带好胸带后约在 2 分钟之内即可成功发送出心跳信号 ; 此时打开手表在心跳测量模式可接收到心率值 ; 当手表接收到胸带心跳信号时将闪烁提示 : 胸带的位置, 会影响其性能, 请沿著绑带移动胸带, 使其位于心脏的上方

23 避免将胸带套在胸毛浓密的位置在干燥寒冷的天气下, 胸带可能需要几分钟, 才能稳定地发挥其功能, 这属于正常现象, 经几分钟热身后, 即可改善其性能如下图所示, 您可将腕表戴在手腕上, 或用安装架固定在自行车或健身器材上, 与胸带发射器距离应 65cm: 故障排除 : 当带好胸带 2 分钟后手表接收不到心率值时 ; 可能是电

24 池电压不足够或你所在环境空气特别干燥寒冷解决方法 :1 尝试更换电池 2 可用饮用水或传导凝胶涂擦胸部

25 4.0 质量标准机芯尺寸 :Φ33.2 mm 厚度 :9.35±0.15 mm 工作温度 :-10 ~+60 工作电压 :3V 准确精度 :±90 秒 / 月电池型号 :CR2032 静态最大驱动电流 : 3.5 u A(T=25 ) 静态平均驱动电流 : 2.5 u A(T=25 ) 心跳测量电流 : 30 u A(T=25 ) EL 灯发光电流 : 10.0 m A 响闹电流 : 2.5 m A 电池寿命 :36 个月 ( 日本电 ) (EL 光每天 2 次, 声音每天响闹一次 30 秒, 心跳测量 1 小时 )

26 附 : 胸带静态电流 : 0.5 u A(T=25 ) 发射瞬间电流 : 4.5 m A(T=25 ) 发射平均电流 : 0.4 m A(T=25 ) 发射距离 : 65 cm 电池使用寿命 :14 个月 ( 日本电 )

Spark Tehcnology Limited

Spark Tehcnology Limited Lavod IronRunner LGW-760 Pedometer Heart Rate Sport Watch Introduction to the Lavod IronRunner LGW-760 Pedometer Heart ate Monitor Watch The Lavod IronRunner LGW-760 pedometer heart watch set consists