Intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to cons

Size: px

Start display at page:

Download "Intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to cons"

语管
5 years ago
Views:

1 English/Chinese Owner Manual TS-110 TS-112 BASS AMPLIFIER

2 Intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: Risk of electrical shock ---- Do NOT OPEN! CAUTION: To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. ENGLISH TS-110 TS-112 Bass Amplifiers Thank you for selecting a COOLMUSIC TS Series bass guitar amplifier. The TS Series offers great sound in a small, convenient and easy-to-use package. Its design makes it perfect as a practice amplifier or for small jam sessions. The built-in Tape/CD jack allows you to jam along with your favorite tunes while the headphone input offers the convenience of practicing privately anytime, day or night. Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Each product feature is numbered. Refer to the front panel diagram in this manual to locate the particular features next to their number. Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier. FEATURES: l Bright and Boost control for COOLMUSIC bass amp sound. l Selectable EQ presets l Gain control l Multi-band equalization l Headphone connection l Tape/CD input connection l Custom-voiced speaker WARNING: To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance, read the operating guide for further warnings. l Speaker protection circuit -1-

3 Front Panel (1) Input Jack Plug your bass into this 1/4 jack. Connect your bass prior to turning on the power switch. (2) Gain This control sets the TS preamp input gain and works in conjuction with the selected Voicing preset (see 3, Voicing). Rotating the control clockwise increases gain, but your final setting will depend on the output of your bass (passive or active) as well as your playing style. (3) Voicing The Voicing switch offers Bright and boost bass amp sound. (4) Equalization The EQ section allows for tonal adjustment of the amp model selected in the Voicing section (3) and causes the EQ to respond in a manner similar to the amp being modeled. The EQ controls on the TS-110, TS-112 are of a standard passive type (controls interact depending on setting), Low - Rotate the control clockwise to increase the low frequencies Mid - Rotate the control clockwise to increase the mid frequencies High - Rotate the control clockwise to increase the high frequencies (5) RCA CD/Line In jacks (TS-110 only) These RCA input jacks allows you to connect a stereo, tape or CD player to your TS Series bass amp and play along. (6) Post-EQ EFX Loop (TS-112 only) This section allows you to add an effect or connect a CD player post-eq or after settings have been applied to the EQ section (see 4). Send/CD Input This standard 1/4 input jack allows you to connect a tape or CD player to your TS Series bass amp and play along. The jack also allows you to connect the input of an effects unit to your TS Series amp (see Return below). Return Used in conjunction with the Send/CD input, this jack allows you to complete the loop of the effects patched in by inserting the output from the effects unit into the return jack. (7) Headphone Input This standard 1/4 input jack allows you to connect standard stereo headphones to the amplifier. Turn the Gain control all the way down before using headphones. Slowly turn up the Gain and find a comfortable listening level. When headphones are connected to TS Series amplifiers the speaker is automatically turned off. -2-

4 (8) Power Switch This two-way rocker switch applies power to the unit when placed in the ON position. A red LED on the Power switch illuminates when power is supplied. WARNING: The power switch breaks only one side of the mains. Hazardous energy can be present inside the enclosure when the switch is in the OFF position. Rear Panel 9 (9) IEC Mains Connector This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton. Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always make sure that the equalizer and all associated equipment is properly grounded. -3-

5 TS-110 SPECIFICATIONS Rated Power: 35 watts RMS into 4 ohms, 1 khz, 115 VAC line Power Consumption: (Domestic) 50 watts, 60 Hz, 115 VAC (Export) 50 watts, 50/60 Hz, 230 VAC The following specs are measured at 1 khz with all controls preset at 5; "Bright" voicing: Input Sensitivity: Nominal Input Level (Bright): dbv 170 mv RMS Maximum Input Level: 7.04 dbv 2.25 V RMS Tape/CD Input: Impedance: High-Z, 1.1Meg ohms Nominal Input Level: 8.79 dbv 2.75 V RMS Headphone Output: Nominal Output Level: 100 mw into 8 ohms (Disconnects internal speaker when used) System Hum & Nominal Input Level: (Clean channel 20 Hz to 20 khz unweighted) Greater than 73 db below rated power Dimensions (H x W x D): x x (449 mm x 391 mm x 285 mm) Weight: 20Kg Rated Power: 60 watts RMS into 4 ohms, 1 khz, 115 VAC line Power Consumption: (Domestic) 75 watts, 60 Hz, 115 VAC (Export) 75 watts, 50/60 Hz, 230 VAC TS-112 SPECIFICATIONS The following specs are measured at 1 khz with all controls preset at 5; "Bright" voicing: Input Sensitivity: Nominal Input Level (Bright): dbv 170 mv RMS Maximum Input Level: 7.04 dbv 2.25 V RMS Tape/CD Input: (Stereo cable must be used) Impedance: High-Z, 33k ohms Nominal Input Level: 8.46 dbv 2.65 V RMS Effects Loop: Nominal send and return level: 7.23 dbv 2.3 V RMS Headphone Output: Nominal Output Level: 235 mw into 8 ohms (Disconnects internal speaker when used) System Hum & Nominal Input Level: (Clean channel 20 Hz to 20 khz unweighted) Greater than 72 db below rated power Dimensions (H x W x D): x x (540 mm x 462 mm x 308 mm) Weight: 25Kg -4-

6 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. For example, near or in a bathtub, swimming pool, sink, wet basement, etc. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with manufacturer s instructions. It should not be placed flat against a wall or placed in a built-in enclosure that will impede the flow of cooling air. 8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. When the provided plug does not fit into your inlet, consult an electrician for replacement of the obsolete outlet. Never break off the grounding. Write for our free booklet Shock Hazard and Grounding. Connect only to a power supply of the type marked on the unit adjacent to the power supply cord. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus. 11. Only use attachments/accessories provided by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a Carl is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture. Does not operate normally, or has been dropped. 15. If this product is to be mounted in an equipment rack, rear support should be provided. -5-

7 中文谢谢你使用我们的酷乐系列贝司音箱, TS 系列贝司音响能够提供足够浑厚的声音在一个非常简洁和方便使用的平台里面, 我们设计它的初衷是为了满足基本的练习和小型的户内表演, 它独有的 CD 外接音源接口和耳机插口能让你能让你自由练习无论身处何时何地在开始使用我们的产品之前请仔细阅读我们的使用说明特点 : 亮音和声音推进控制极大了丰富了贝司的演奏效果可选择的 EQ 预设功能增益控制多段均衡耳机接口 CD 和外置音源连接定制的 COOLMUSIC 高性能单元特制的单元保护线路 (1) 输入接口 (Input Jack) 在打开此音箱的电源之前请先将你的贝司接入这个 1/4 的接口 (2) 增益控制 (Gain) 通过这个旋钮可以控制 TS 的前置增益, 可以通过同时调节声音控制达到最佳的效果, 通过旋转它从左至右来调节增益效果, 但是最后的效果也是被你调节的贝司声音的大小以及你选择的弹奏模式所决定的 (3) 声音模式选择 (Vociing) 通过按这个按钮我们有两个声音模式可供选择, 一个是明亮一点的声音, 另外一个是比较沉厚的声音 (4) 均衡 (Equalization) 这个三段 EQ 均衡选择允许你对声音进行完美的调节, 当你顺时针旋转 LOW 的时候低频将会被增加. 当你顺时针旋转 MID 的时候中频将会被增加. 当你顺时针旋转 HIGH 的时候高频将会被增加. (5) 外置音源 /CD 接口 (TS-110 独有 ) 这个附加的输入接口能让你连接立体声 CD 或者磁带的外接音源大大便利了你的个人练习. (6)Post-EQ EFX 踏板接口 (TS-112 独有 ) 这个接口允许你接入一个效果或者 CD 机, 或者一个 POST EQ (7)HeadphoneInput( 耳机接入 ) 这个标准的 1/4" 接能让你将立体声耳机接入到音箱内, 请将增益调到最小当你使用耳机之前, 然后慢慢将声音调到自己认可的声音当接入耳机的时候音箱的声音将自动关掉. (8)PowerSwitch( 电源开关 ) 当开关在 ON 位置时此音箱就被打开了, 当红色的 LED 开关位于 ON 时此机正处于关机状态. -6-

8 需要注意的安全事项特别注意 : 在你要连接功放的电源时, 根据当地的电压在 115V 115V 或 230V (50-60Hz 50-60Hz) 的电源转换开关上选择你的供电电压. 否则将会烧坏你的设备在使用我们的产品时, 请你认真地阅读注意的安全事项 : 1. 在使用本产品前仔细的阅读操作指南 2. 请好好的保存这本操作指南 3. 请注意所有的警示指南 4. 请按照操作指南去使用本产品 5. 不要在近水的地方操作本产品, 例如浴盆, 游泳池, 潮湿的地下室 6. 请用微湿的抹布进行清洁 7. 请保持本产品通风口和散热口的畅通, 不要将本产品放置在靠墙的地方,( 最好保持超过 16CM 的空间 ) 或箱子里, 因为这样会影响到本产品的通风和散热. 8. 不要将本产品放置在靠近发热体的附近, 例如, 电热炉, 烤箱等 9. 如果发现插座和本产品的电源线插头不匹配, 请不要将本产品插头的地线端拆掉以插入这个本来不匹配的插座里, 这样将导致严重的后果, 并大大增加了你和本产品受到伤害的机率, 我们建议你最好去更换一个匹配本产品插头的插座. 10. 请不要使用任何不是由原厂提供的附件和配件. 11. 当在雷电或你可能长时间不使用本产品的情况下, 请将插头拔掉. 12. 考虑到本产品的重量, 在搬运本产品时请注意安全操作, 不要被压到手指头. 13. 一旦本产品发生故障, 请找专业的维修人员进行维修, 或将本产品发回购买地, 由我们的维修部门处理. 14. 请妥善的保管好电源线, 不要将其折叠或刮花. 15. 本产品能够产生极大的声压, 所以在使用时一定要注意将音量打到合适的位置, 以免给你的听力造成临时, 或永久性的伤害 -7-

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DV-SP302 Ct WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE