000Book_D13VL_ChS.indb

Size: px

Start display at page:

Download "000Book_D13VL_ChS.indb"

谓伶姜
5 years ago
Views:

1 Drill D 13VL English Keep for future reference Handling instructions

2 2

3 3

4 n 0 V ---/min A 4

6 6

7 7

8 8

9 9

10 10

11 CONTENTS GENERAL POWER TOOL SAFETY WARNINGS English GENERAL POWER TOOL SAFETY WARNINGS...11 DRILL SAFETY WARNINGS...13 SYMBOLS...14 SPECIFICATIONS...14 STANDARD ACCESSORIES...14 APPLICATIONS...15 PRIOR TO OPERATION...15 HOW TO USE...17 MAINTENANCE AND INSPECTION...18 SELECTING ACCESSORIES...19 WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury. Save all warnings and instructions for future reference. The term power tool in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodifi ed plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 11

12 English d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your fi nger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 12

13 English c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power toolʼs operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. CAUTION Keep children and infirm persons away. When not in use, tools should be stored out of reach of children and infirm persons. DRILL SAFETY WARNINGS 1. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 2. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock. 13

14 English SYMBOLS WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use. To reduce the risk of injury, user must read instruction manual. n 0 No-load speed V Rated voltage ---/min revolutions per minute A Current Class II tool SPECIFICATIONS Voltage Power input 220V 860 W Speed change 1 2 No-load speed /min /min Capacity Steel 13 mm 8 mm Wood 40 mm 25 mm Full load impact rate 8100 /min /min Weight (without cord) 2.9 kg STANDARD ACCESSORIES In addition to the main unit (1 unit), the package contains the accessories listed in the below. 1 Side Handle (Code No ) 2 Depth Gauge (Code No ) 3 Chuck Wrench (Code No )

15 APPLICATIONS Boring holes in metal, wood and plastic. PRIOR TO OPERATION English 1. Power source Ensure that the power source to be utilized conforms to the power requirements specifi ed on the product nameplate. 2. Power switch Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident. 3. Extension cord When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable. 4. Check the receptacle If the receptacle only loosely accepts the plug, the receptacle must be repaired. Contact a licensed electrician to make appropriate repairs. If such a faulty receptacle is used, it may cause overheating, resulting in a serious hazard. 5. Confi rming condition of the environment Confi rm that the work site is placed under appropriate conditions conforming to prescribed precautions. 6. Selecting the appropriate drill bit When boring metal or plastic Use an ordinary metalworking drill bit. When boring wood Use an ordinary woodworking drill bit. However, when drilling 6.5 mm or smaller holes, use a metalworking drill bit. 7. Mounting and dismounting of the bit For keyed chuck (Fig. 1) (1) Open the chuck jaws, and insert the bit into the chuck. (2) Place the chuck wrench in each of the three holes in the chuck, and turn it in the clockwise direction (viewed from the front side). Tighten securely. (3) To remove the bit, place the chuck wrench into one of the holes in the chuck and turn it in the counterclockwise direction. Chuck wrench Tighten Drill chuck Loosen Fig. 1 15

16 English For keyless chuck (Fig. 2) (1) Mounting the bit Turn the sleeve counterclockwise and open the chuck. After inserting the drill bit into the chuck as far it will go, grip the ring and close the chuck by turning the sleeve clockwise as viewed from the front. (2) Dismounting the bit Grip the ring and open the chuck by turning the sleeve counterclockwise. 8. Fixing the side handle (Fig. 3) Attach the side handle to the mounting part. Rotate the side handle grip in a clockwise direction to secure it. Set the side handle to a position that is suited to the operation and then securely tighten the side handle grip. To attach a depth gauge on the side handle, insert the gauge into the U-shaped groove on the side handle, adjust the position of the depth gauge in accordance with the desired depth of the hole, and fi rmly tighten the side handle grip. (Fig. 4) 9. High-speed/Low-speed changeover Prior to changing speed, ensure that the switch is in the OFF position, and the drill has come to a complete stop. To change speed, rotate the gear shift dial as indicated by the arrow in Fig. 5. The numeral 1 engraved on the drill body denotes low speed, the numeral 2 denotes high speed. If it is hard to turn the gear shift dial, turn the chuck slightly in either direction and then turn the gear shift dial again. Sleeve Retaining ring Loosen Tighten Fig. 2 Side handle Loosen Tighten Fig. 3 Depth gauge Loosen Tighten Side handle Fig. 4 Gear Shift Dial Fig. 5 16

17 10. Check the rotational direction (Fig. 6, 7) The bit rotates clockwise (viewed from the rear side) by turning the rotational change lever counterclockwise. The bit rotates counterclockwise (viewed from the rear side) by turning the rotational change lever clockwise. NOTE Actuate the rotational change lever only when the machine is at standstill. The rotational change lever is used to reverse the rotational direction of the machine. However, this is not possible with the On/Off switch actuated. Rotational change lever Fig. 6 English Rotational change lever Fig. 7 HOW TO USE CAUTION To prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle when the drill bits and other various parts are installed or removed. The power switch should also be turned off during a work break and after work. 1. Switch operation When the trigger is depressed, the tool rotates. When the trigger is released, the tool stops. The rotational speed of the drill can be controlled by varying the amount that the trigger switch is pulled. Speed is low when the trigger switch is pulled slightly and increases as the trigger switch is pulled more. The desired rotation speed can be preselected with the speed control dial. Turn the speed control dial clockwise for higher speed and counterclockwise for lower speed. (Fig. 8) Switch trigger Low speed Stopper High speed Pulling the trigger and pushing the stopper, Speed control dial it keeps the switched-on condition which is convenient for continuous running. When Fig. 8 switching off, the stopper can be disconnected by pulling the trigger again. 17

18 English 2. Drilling When drilling, start the drill slowly, and gradually increasing speed as you drill. Always apply pressure in a straight line with the bit. Use enough pressure to keep drilling, but do not push hard enough to stall the motor or defl ect the bit. To minimize stalling or breaking through the material, reduce pressure on drill and ease the bit through the last part of the hole. If the drill stalls, release the trigger immediately, remove the bit from the work and start again. Do not click the trigger on and off in an attempt to start a stalled drill. This can damage the drill. The larger the drill bit diameter, the larger the reactive force on your arm. Be careful not to lose control of the drill because of this reactive force. To maintain fi rm control, establish a good foothold, use side handle, hold the drill tightly with both hands, and ensure that the drill is vertical to the material being drilled. The drill bit may become overheated during operation; however, it is sufficiently operable. Do not cool the drill bit in water or oil. Immediately after use, while it is still revolving, if the Drill is placed on a location where considerable ground chips and dust have accumulated, dust may occasionally be absorbed into the drill mechanism. Always pay attention to this undesirable possibility. MAINTENANCE AND INSPECTION WARNING Be sure to switch power OFF and disconnect the plug from the receptacle during maintenance and inspection. 1. Inspecting the drill bits Since use of an abraded drill bits will cause motor malfunctioning and degraded efficiency, replace the drill bits with a new one or resharpening without delay when abrasion is noted. 2. Inspecting the mounting screws Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. Failure to do so could result in serious hazard. 3. Maintenance of the motor The motor unit winding is the very heart of the power tool. Exercise due care to ensure the winding does not become damaged and/or wet with oil or water. 4. Inspecting the carbon brushes For your continued safety and electrical shock protection, carbon brush inspection and replacement on this tool should ONLY be performed by a HiKOKI Authorized Service Center. 5. Replacing supply cord If the replacement of the supply cord is necessary, it has to be done by HiKOKI Authorized Service Center to avoid a safety hazard. 18

19 6. Service parts list English CAUTION Repair, modification and inspection of HiKOKI Power Tools must be carried out by a HiKOKI Authorized Service Center. This Parts List will be helpful if presented with the tool to the HiKOKI Authorized Service Center when requesting repair or other maintenance. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed. SELECTING ACCESSORIES For details contact HiKOKI Authorized Service Center. Part Number: Chuck Wrench Part Number: Depth Gauge Part Number: Side Handle Part Number: Plastic Carrying Case 19

000Book_DV13SS_ChS.indb

000Book_DV13SS_ChS.indb Impact Drill DV 13SS DV 13VSS DV 16SS DV 16VSS English Keep for future reference Handling instructions 2 3 4 5 6 7 8 9 1 2 3 DV13SS 4 5 6 7 8 9 10 11 12 16 17 18 19 20 21 22 15 13 14 23 2425 26 27 28 29