SDT Uclinux SDT.alf.c 44blib.alf 44blib.c jtag ADS.alf.c make menuconfig make dep make clean make lib_only make user_only make romfs make image make uclinux ext2 cash lcd frambuffer 1 armsys-c uclinux armsys-c uclinux 1.8M 0.9M SDRAM 1.8M 0.8M uclinux ro-base rm-base imageram.bin romfsimag.bin Pc uclinux
Plese wait a moment to start running...linux version 2.4.24-uc0 (root@xujing) (g cc version 2.95.3 20010315 (release)(coldfire patches - 20010318 from http://fid des.net/coldfire/)(uclinux XIP and shared lib patches from http://www.snapgear.c om/)) #355 11 26 03:10:23 CST 2004 Processor: Samsung S3C44B0X revision 0 Architecture: S3C44B0X On node 0 totalpages: 2048 zone(0): 0 pages. zone(1): 2048 pages. zone(2): 0 pages. Kernel command line: root=/dev/rom0 init=/linuxrc Console: colour dummy device 80x30 Calibrating delay loop... 31.84 BogoMIPS Memory: 8MB = 8MB total Memory: 6072KB available (1715K code, 206K data, 60K init) Dentry cache hash table entries: 1024 (order: 1, 8192 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd ttys0 at I/O 0x1d00000 (irq = 3) is a S3C44B0 ttys1 at I/O 0x1d04000 (irq = 2) is a S3C44B0 LCD buffer : 0c260000 ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) Last modified Nov 1, 2000 by Paul Gortmaker NE*000 ethercard probe at 0x8000000: 52 54 ab 12 34 56 eth0: NE1000 found at 0x8000000, using IRQ 22 Blkmem copyright 1998,1999 D. Jeff Dionne Blkmem copyright 1998 Kenneth Albanowski Blkmem 1 disk images: 0: C500000-C5B3FFF [VIRTUAL C500000-C5B3FFF] (RO) RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 512) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly. Freeing init memory: 60K Shell invoked to run file: /etc/rc Command: hostname Samsung Command: /bin/expand /etc/ramfs.img /dev/ram0 Command: /bin/expand /etc/ramfs2048.img /dev/ram1 Command: mount -t proc proc /proc Command: mount -t ext2 /dev/ram0 /var Command: mount -t ext2 /dev/ram1 /ramdisk Command: chmod 777 /ramdisk Command: mkdir /var/config Command: mkdir /var/tmp Command: mkdir /var/log Command: mkdir /var/run Command: mkdir /var/lock Command: cat /etc/motd Welcome to _ / _ _ \ \ \/ / _ _ / \ \ _ _ _ _ \ \_/\_/ _ For further information check: http://www.uclinux.org/ Command: ifconfig lo 127.0.0.1 Command: route add -net 127.0.0.0 netmask 255.255.255.0 lo Command: ifconfig eth0 192.168.253.2 netmask 255.255.255.0 up Command: Execution Finished, Exiting Sash command shell (version 1.1.1) 2 menuconfig tcp/ip CORE MENU *1.bin A
B - C
MAIN MENU Plese wait a moment to start running...linux version 2.4.24-uc0 (root@localhost) (gcc version 2.95.3 20010315 (release)(coldfire patches - 20010318 from http:// fiddes.net/coldfire/)(uclinux XIP and shared lib patches from http://www.snapgea r.com/)) #365 Thu Jan 27 16:18:15 EST 2005 Processor: Samsung S3C44B0X revision 0 Architecture: S3C44B0X On node 0 totalpages: 2048 zone(0): 0 pages. zone(1): 2048 pages. zone(2): 0 pages. Kernel command line: root=/dev/rom0 init=/linuxrc Calibrating delay loop... 31.84 BogoMIPS Memory: 8MB = 8MB total Memory: 6144KB available (1714K code, 156K data, 44K init) Dentry cache hash table entries: 1024 (order: 1, 8192 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd ttys0 at I/O 0x1d00000 (irq = 3) is a S3C44B0 ttys1 at I/O 0x1d04000 (irq = 2) is a S3C44B0 ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) Last modified Nov 1, 2000 by Paul Gortmaker NE*000 ethercard probe at 0x8000000: 52 54 ab 12 34 56 eth0: NE1000 found at 0x8000000, using IRQ 22 Blkmem copyright 1998,1999 D. Jeff Dionne Blkmem copyright 1998 Kenneth Albanowski Blkmem 1 disk images: 0: C500000-C5F93FF [VIRTUAL C500000-C5F93FF] (RO) RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 512) IP-Config: Incomplete network configuration information. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (romfs filesystem) readonly. Freeing init memory: 44K Shell invoked to run file: /etc/rc Command: hostname Samsung Command: /bin/expand /etc/ramfs.img /dev/ram0 Command: /bin/expand /etc/ramfs2048.img /dev/ram1 Command: mount -t proc proc /proc Command: mount -t ext2 /dev/ram0 /var mount: Mounting /dev/ram0 on /var failed: No such device pid 12: failed 256 Command: mount -t ext2 /dev/ram1 /ramdisk mount: Mounting /dev/ram1 on /ramdisk failed: No such device pid 13: failed 256 Command: chmod 777 /ramdisk /ramdisk: Read-only file system Command: mkdir /var/config /var/config: Read-only file system Command: mkdir /var/tmp /var/tmp: Read-only file system Command: mkdir /var/log /var/log: Read-only file system Command: mkdir /var/run /var/run: Read-only file system
Command: mkdir /var/lock /var/lock: Read-only file system Command: cat /etc/motd Welcome to _ / _ _ \ \ \/ / _ _ / \ \ _ _ _ _ \ \_/\_/ _ For further information check: http://www.uclinux.org/ Command: ifconfig lo 127.0.0.1 Command: route add -net 127.0.0.0 netmask 255.255.255.0 lo Command: ifconfig eth0 192.168.253.2 netmask 255.255.255.0 up Command: Execution Finished, Exiting Sash command shell (version 1.1.1) /> 3 *2.bin A--
B: 1.Use USB-downloader download code to SDRAM. 2.Use USB-downloader download code to SDRAM & Nandflash. 3.Use USB-downloader burn flashrom. 4.Copy code from flashrom to SDRAM. 5.Run at specify address. 6.Run code in Nandflash. 7.Start uclinux. 8.Format Nandflash. 9.Test hardware Input the address to put the code (Default address is 0xc008000): USB Interface is active! You can use USBdownload.exe to download *.bin file! Receive a file... FileName:imageram2 FileSuffix:bin FileLen:0x1b5dd0 Completed Download! --------------------------------------------------------------- 1.Use USB-downloader download code to SDRAM.
2.Use USB-downloader download code to SDRAM & Nandflash. 3.Use USB-downloader burn flashrom. 4.Copy code from flashrom to SDRAM. 5.Run at specify address. 6.Run code in Nandflash. 7.Start uclinux. 8.Format Nandflash. 9.Test hardware Input the address to put the code (Default address is 0xc008000): USB Interface is active! You can use USBdownload.exe to download *.bin file! Receive a file... FileName:imageram2 FileSuffix:bin FileLen:0x1b5dd0 Completed Download! --------------------------------------------------------------- 1.Use USB-downloader download code to SDRAM. 2.Use USB-downloader download code to SDRAM & Nandflash. 3.Use USB-downloader burn flashrom. 4.Copy code from flashrom to SDRAM. 5.Run at specify address. 6.Run code in Nandflash. 7.Start uclinux. 8.Format Nandflash. 9.Test hardware Input the address to put the code (Default address is 0xc008000):0xc500000 USB Interface is active! You can use USBdownload.exe to download *.bin file! Receive a file... FileName:romfsram2 FileSuffix:bin FileLen:0xe7000 Completed Download! --------------------------------------------------------------- 1.Use USB-downloader download code to SDRAM. 2.Use USB-downloader download code to SDRAM & Nandflash. 3.Use USB-downloader burn flashrom. 4.Copy code from flashrom to SDRAM. 5.Run at specify address. 6.Run code in Nandflash.
7.Start uclinux. 8.Format Nandflash. 9.Test hardware Input the address (Default address is 0xc008000): Plese wait a moment to start running...linux version 2.4.24-uc0 (root@localhost) (gcc version 2.95.3 20010315 (release)(coldfire patches - 20010318 from http:// fiddes.net/coldfire/)(uclinux XIP and shared lib patches from http://www.snapgea r.com/)) #367 Fri Jan 28 10:49:52 EST 2005 Processor: Samsung S3C44B0X revision 0 Architecture: S3C44B0X On node 0 totalpages: 2048 zone(0): 0 pages. zone(1): 2048 pages. zone(2): 0 pages. Kernel command line: root=/dev/rom0 init=/linuxrc Calibrating delay loop... 31.84 BogoMIPS Memory: 8MB = 8MB total Memory: 6180KB available (1671K code, 160K data, 44K init) Dentry cache hash table entries: 1024 (order: 1, 8192 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd ttys0 at I/O 0x1d00000 (irq = 3) is a S3C44B0 ttys1 at I/O 0x1d04000 (irq = 2) is a S3C44B0 ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) Last modified Nov 1, 2000 by Paul Gortmaker NE*000 ethercard probe at 0x8000000: 52 54 ab 12 34 56 eth0: NE1000 found at 0x8000000, using IRQ 22 Blkmem copyright 1998,1999 D. Jeff Dionne Blkmem copyright 1998 Kenneth Albanowski Blkmem 1 disk images: 0: C500000-C5E6FFF [VIRTUAL C500000-C5E6FFF] (RO) RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512) IP-Config: Incomplete network configuration information. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (romfs filesystem) readonly. Freeing init memory: 44K Shell invoked to run file: /etc/rc Command: hostname Samsung Command: /bin/expand /etc/ramfs.img /dev/ram0 Command: /bin/expand /etc/ramfs2048.img /dev/ram1 Command: mount -t proc proc /proc Command: mount -t ext2 /dev/ram0 /var Command: mount -t ext2 /dev/ram1 /ramdisk Command: chmod 777 /ramdisk Command: mkdir /var/config Command: mkdir /var/tmp Command: mkdir /var/log Command: mkdir /var/run Command: mkdir /var/lock Command: cat /etc/motd Welcome to _ / _ _ \ \ \/ / _ _ / \ \ _ _ _ _ \ \_/\_/ _ For further information check: http://www.uclinux.org/ Command: ifconfig lo 127.0.0.1 Command: route add -net 127.0.0.0 netmask 255.255.255.0 lo Command: ifconfig eth0 192.168.253.2 netmask 255.255.255.0 up Command: Execution Finished, Exiting Sash command shell (version 1.1.1) /> 5. *4.bin frambuffer framebuffer
make menuconfig Character devices, Virtual terminal Console device Framebuffer Support framebuffer Advanced low level 8bpp packed pixel support, Select compiled-in fonts A B:
C: FileName:imageram4 FileSuffix:bin FileLen:0x1cf970 Completed Download! --------------------------------------------------------------- 1.Use USB-downloader download code to SDRAM. 2.Use USB-downloader download code to SDRAM & Nandflash. 3.Use USB-downloader burn flashrom. 4.Copy code from flashrom to SDRAM. 5.Run at specify address. 6.Run code in Nandflash. 7.Start uclinux. 8.Format Nandflash. 9.Test hardware Input the address (Default address is 0xc008000): Plese wait a moment to start running...linux version 2.4.24-uc0 (root@localhost) (gcc version 2.95.3 20010315 (release)(coldfire patches - 20010318 from http:// fiddes.net/coldfire/)(uclinux XIP and shared lib patches from http://www.snapgea
r.com/)) #369 Fri Jan 28 16:28:12 EST 2005 Processor: Samsung S3C44B0X revision 0 Architecture: S3C44B0X On node 0 totalpages: 2048 zone(0): 0 pages. zone(1): 2048 pages. zone(2): 0 pages. Kernel command line: root=/dev/rom0 init=/linuxrc Console: colour dummy device 80x30 Calibrating delay loop... 31.84 BogoMIPS Memory: 8MB = 8MB total Memory: 6052KB available (1740K code, 198K data, 64K init) Dentry cache hash table entries: 1024 (order: 1, 8192 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd ttys0 at I/O 0x1d00000 (irq = 3) is a S3C44B0 ttys1 at I/O 0x1d04000 (irq = 2) is a S3C44B0 LCD buffer : 0c260000 ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) Last modified Nov 1, 2000 by Paul Gortmaker NE*000 ethercard probe at 0x8000000: 52 54 ab 12 34 56 eth0: NE1000 found at 0x8000000, using IRQ 22 Blkmem copyright 1998,1999 D. Jeff Dionne Blkmem copyright 1998 Kenneth Albanowski Blkmem 1 disk images: 0: C500000-C5E6FFF [VIRTUAL C500000-C5E6FFF] (RO) RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 512) IP-Config: Incomplete network configuration information. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (romfs filesystem) readonly. Freeing init memory: 64K Shell invoked to run file: /etc/rc Command: hostname Samsung
Command: /bin/expand /etc/ramfs.img /dev/ram0 Command: /bin/expand /etc/ramfs2048.img /dev/ram1 Command: mount -t proc proc /proc Command: mount -t ext2 /dev/ram0 /var Command: mount -t ext2 /dev/ram1 /ramdisk Command: chmod 777 /ramdisk Command: mkdir /var/config Command: mkdir /var/tmp Command: mkdir /var/log Command: mkdir /var/run Command: mkdir /var/lock Command: cat /etc/motd Welcome to _ / _ _ \ \ \/ / _ _ / \ \ _ _ _ _ \ \_/\_/ _ For further information check: http://www.uclinux.org/ Command: ifconfig lo 127.0.0.1 Command: route add -net 127.0.0.0 netmask 255.255.255.0 lo Command: ifconfig eth0 192.168.253.2 netmask 255.255.255.0 up Command: Execution Finished, Exiting Sash command shell (version 1.1.1) /> uclinux uclinux gumanman2003@hotmailcom 2005-2-6 www.hzlitai.com.cn