SM Range Three Phase Induction Motor Tianjin Shenchuan Electric Machine Co., Ltd. China
Contents Performance data Standard efficiency IE1 cast iron three phase motor Performance data Standard efficiency IE1 aluminum three phase motor Performance data (Frame No. 63-132) High efficiency IE2 cast iron three phase motor Performance data Mechanical data Standard efficiency IE1 cast iron three phase motor Mechanical data (Frame No. 0-355) Standard efficiency IE1 aluminum three phase motor Mechanical data (Frame No. 0-132) High efficiency IE2 cast iron three phase motor Mechanical data Notes for ordering Contact information
Performance data Standard Efficiency IE1 Cast Iron Three Phase Motor Performance Data Standard efficiency IE1 squirrel cage electric motors Cast iron frame IP55 Three-phase 50 Hz 30V / 400V / 415V / 525V / 550V Class F insulation With PTC thermistors TEFC RPM values are based on 400V. Standard Efficiency IE1 Cast Iron Three Phase Motor Performance Data 3000 RPM-2 Pole Frame Full load current In(A) Locked rotor 400V 525V current torque torque torque (RPM) 50 75 100 50 75 100 Il/In Full load (Nm) Locked rotor Tl/Tn Breakdown Tb/Tn t(kg) Efficiency Power factor 0.1 63 0.55 0.42 5.2 0.632 2.4 2.4 2720 50.5 56.5 59.0 0.55 0.69 0.0 0.25 63 0.75 0.5 5.0 0.0 2.5 2.5 9 2720 52.0 57.0 60.0 0.56 0.70 0.1 0.37 71 0.99 0.76 5. 1.29 2.3 2.4 11 2740 62.0 66.5 67.0 0.56 0.70 0.1 0.55 71 1.42 1.09 5. 1.92 2.2 2.3 12 2740 65.0 67.0 6.0 0.5 0.72 0.2 0.75 0 1.77 1.4 6.1 2.52 2.2 2.6 14 240 72.0 74.0 74.0 0.62 0.76 0.3 1.1 0 2.49 1.9 6.3 3.70 2.2 2.6 15 240 73. 75. 75. 0.65 0.7 0.4 1.5 90S 3.2 2.5 6.3 5.05 2.3 2.6 21 240 76 7.5 7.5 0.63 0.76 0.4 2.2 90L 4.61 3.51 6. 7.40 2.6 2.9 24 240 7 0.0 1.0 0.63 0.77 0.5 3.0 100L 6.07 4.62 7.0 10.0 2.5 2. 34 260 1.5 2.0 2.0 0.69 0.1 0.7 4.0 112M 7.4 6 7.2 13.3 2.3 2.6 45 20 2 3.7 3.7 0.71 0.2 0. 5.5 132S 10.5.0 7.5 1.1 2.2 3.0 61 2900 5 6.0 6.0 0.72 0.2 0. 7.5 132S 14.3 10.9 7.2 24.7 2.2 2.7 66 2900 5.5 6.5 6.5 0.72 0.2 0. 9.2 132M 17.4 13.3 7.5 30.3 2.3 2.9 76 2900 6 7.0 7.0 0.72 0.2 0. 11.0 160M 20.3 15.5 7.0 35.9 2.2 2.7 107 2930 7.4.2.0 0.73 0.3 0.9 15.0 160M 27.4 20.9 7.0 4.9 2.2 2.7 117 2930.6 9.2 9.0 0.73 0.3 0.9 1.5 160L 33.2 25.3 7.0 60.3 2.3 2.7 137 2930 9.3 9.7 9.5 0.73 0.3 0.90 22 10M 39.2 29.9 7.0 71.5 2.0 2.7 170 2940 90.1 90.4 90.2 0.74 0.4 0.90 30 200L 52.9 40.3 6.7 97.1 2.1 2.4 230 2950 90.9 91.3 91.0 0.75 0.4 0.90 37 200L 64.9 49.5 6.9 120 2.2 2.5 246 2950 91.6 91. 91.5 0.75 0.4 0.90 45 225M 7.5 59. 7.0 145 2.0 2.7 310 2960 91.4 92.2 92.0 0.76 0.5 0.90 55 250S/M 95.5 72. 7.4 177 2.0 2. 395 2965 91. 92.6 92.4 0.77 0.6 0.90 75 250S/M 129 9.3 7. 242 2.2 2.9 440 2965 92. 93.4 93.2 0.77 0.6 0.90 90 20S 153 117 7. 29 2.0 2.6 600 2970 92.9 93.5 93.4 0.79 0.7 0.91 110 20M 17 143 7. 354 2.1 2.6 650 2970 93.2 93.9 93.7 0.79 0.7 0.91 132 315S 223 170 7.6 423 2.0 2.7 990 290 93.2 94.0 94.0 0.79 0.7 0.91 160 315M/L 270 206 7.5 513 2.0 2.7 1130 290 93.5 94.2 94.2 0.79 0.7 0.91 15 315M/L 311 237 7.2 593 2.0 2.6 1170 290 94.0 94.4 94.4 0.79 0.7 0.91 200 315M/L 336 256 7.3 641 2.1 2.6 1215 290 94.0 94.5 94.5 0.0 0.7 0.91 250 355M/L 419 320 7.2 01 2.0 2.6 1705 290 94.5 94. 94.7 0.6 0. 0.91 315 355M/L 52 403 7.3 1010 2.1 2.6 2050 290 94.5 94. 94.7 0.7 0.9 0.91 355 355M/L 595 453 7.5 113 2.1 2.6 2260 290 94.5 94. 94.7 0.7 0.9 0.91
Standard Efficiency IE1 Cast Iron Three Phase Motor Performance Data 1500 RPM-4 Pole Frame Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 0.1 63 0.61 0.47 4.0 1.31 2.1 2.2 9 1310 54.0 56.0 5.0 0.51 0.64 0.73 0.25 71 0.79 0.6 5.0 1.0 2.1 2.3 11 1330 55.0 59.0 62.0 0.52 0.65 0.74 0.37 71 1.15 0. 5.0 2.66 2.1 2.3 12 1330 59.0 63.0 63.0 0.52 0.65 0.74 0.55 0 1.49 1.14 5.2 3.7 2.3 2.4 14 1390 65.0 70.0 71.0 0.53 0.66 0.75 0.75 0 1.94 1.4 5.2 5.15 2.3 2.4 15 1390 70.0 72.0 72.3 0.56 0.6 0.77 1.1 90S 2.6 2.04 5.4 7.56 2.3 2.4 21 1390 70.0 75.0 76.0 0.55 0.69 0.7 1.5 90L 3.50 2.67 5.5 10.3 2.4 2.6 24 1390 75.5 77.7 7.2 0.5 0.73 0.79 2.2 100L 4.4 3.69 5.6 14.9 2.3 2.6 35 1410 0.0 1.0 1.0 0.60 0.73 0.1 3.0 100L 6.43 4.9 5. 20.3 2.4 2.7 37 1410 0.0 1. 2.2 0.60 0.73 0.2 4.0 112M.36 6.37 6.3 26.6 2.3 2.7 49 1435 2. 3. 4.2 0.64 0.76 0.2 5.5 132S 11.1.46 6.5 36.5 2.1 2.6 63 1440 4.5 5.6 6.0 0.63 0.77 0.3 7.5 132M 14. 11.3 6.9 49.7 2.3 2.7 76 1440 5.0 6.5 7.0 0.63 0.77 0.4 9.2 132M 1.1 13. 7.5 60.6 2.4 2.9 7 1450 6. 7.5 7.4 0.64 0.77 0.4 11.0 160M 21.5 16.4 6.5 72.0 2.2 2.6 116 1460 7.0.0.0 0.64 0.77 0.4 15.0 160L 2.6 21. 6.9 9.2 2.2 2.7 131 1460.2 9.2 9.0 0.65 0.77 0.5 1.5 10M 34.5 26.3 6.5 120 2.2 2.6 165 1470 9.5 90.2 90.0 0.67 0.7 0.6 22 10L 40.9 31.2 6.5 143 2.2 2.6 12 1470 9.6 90.4 90.3 0.67 0.7 0.6 30 200L 55.2 42.1 6.6 195 2.2 2.6 241 1470 9.7 91.0 91.3 0.6 0.7 0.6 37 225S 67 51 6.6 239 2.2 2.5 304 140 91.3 91.6 91.7 0.71 0.1 0.7 45 225M 1 61.7 6.9 290 2.2 2.6 325 140 91. 92.2 92.2 0.72 0.2 0.7 55 250S/M 9.5 75 6. 355 2.1 2.5 415 140 92.2 92.7 92.6 0.72 0.2 0.7 75 250S/M 134 102 7.0 44 2.2 2.7 475 140 92.6 93.0 93.0 0.73 0.2 0.7 90 20S 160 122 6.7 51 2.2 2.5 640 140 92.9 93.5 93.5 0.74 0.3 0.7 110 20M 195 149 6. 710 2.2 2.5 700 140 93.2 93. 93. 0.74 0.3 0.7 132 315S 230 175 6.4 52 2.2 2.4 100 140 93.6 94.2 94.0 0.75 0.4 0. 160 315M/L 27 212 7.0 1032 2.4 2.6 1165 140 94.0 94.4 94.3 0.75 0.4 0. 15 315M/L 322 245 6.7 1194 2.3 2.5 1210 140 94.0 94.4 94.3 0.75 0.4 0. 200 315M/L 34 265 6. 1290 2.4 2.6 1270 140 94.0 94.4 94.3 0.76 0.4 0. 250 355M/L 424 323 7.4 1602 2.1 2.5 1720 1490 94.3 94.7 94.6 0.7 0.6 0.90 315 355M/L 533 406 7.5 2019 2.2 2.5 1920 1490 94.5 94.9 94. 0.7 0.6 0.90 355 355M/L 601 45 7.5 2275 2.2 2.5 2050 1490 94.5 94.9 94. 0.7 0.6 0.90 400 355M/L 677 516 7.5 2564 2.2 2.5 2140 1490 94.5 94.9 94. 0.7 0.6 0.90
Standard Efficiency IE1 Cast Iron Three Phase Motor Performance data 1000 RPM-6 Pole Frame Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 0.25 71 0.92 0.7 3.6 2.1 1.9 2.1 12 50 51.0 5.0 60.0 0.46 0.56 0.66 0.37 0 1.21 0.92 3.6 3. 1.9 2.1 15 910 55.0 60.0 63.0 0.4 0.60 0.70 0.55 0 1.67 1.27 3.6 5.77 1.9 2.1 17 910 59.0 64.0 66.0 0.49 0.62 0.72 0.75 90S 2.15 1.64 4.2 7.79 2.1 2.3 21 920 6.0 70.0 70.0 0.51 0.63 0.72 1.1 90L 2.9 2.3 4.3 11.4 2.1 2.3 24 920 70.0 72.0 73.0 0.52 0.64 0.73 1.5 100L 3.75 2.6 5.0 15.4 2.2 2.4 32 930 76.0 77.0 76.0 0.54 0.6 0.76 2.2 112M 5.36 4.09 5.1 22.5 2.2 2.4 46 935 7.0 7.5 7.0 0.55 0.6 0.76 3.0 132S 6.91 5.26 5.9 29. 2.1 2.5 60 960 0.0 2.5 2.5 0.5 0.70 0.76 4.0 132M 9.04 6.9 6.2 39. 2.2 2.6 71 960 1.4 3. 4.0 0.5 0.70 0.76 5.5 132M 12.2 9.3 6.4 54.7 2.3 2.6 0 960 2.5 4.5 4. 0.59 0.71 0.77 7.5 160M 16 12.2 6.4 74.2 2.1 2.5 110 965 5.3 5.6 5.5 0.61 0.73 0.79 9.2 160L 19.4 14. 6.5 91.1 2.2 2.5 125 965 6.2 6.7 6.6 0.61 0.73 0.79 11.0 160L 23 17.5 6.5 109 2.2 2.5 133 965 7.0 7.5 7.2 0.62 0.74 0.79 15.0 10L 30.2 23 6.5 14 2.1 2.5 175 970.3.7.5 0.64 0.76 0.1 1.5 200L 36.6 27.9 6.5 11 2.1 2.4 222 975.3 9.3.9 0.64 0.76 0.2 22 200L 42. 32.6 6. 216 2.2 2.5 233 975 9.3 9. 9.5 0.67 0.77 0.3 30 225M 56.6 43.1 6.5 293 2.0 2.4 304 90 90. 91.3 91.0 0.70 0.79 0.4 37 250S 67.9 51.7 6.9 361 2.1 2.6 32 90 91.3 91.7 91.5 0.72 0.1 0.6 45 250M 2.1 62.6 7.0 43 2.2 2.6 423 90 91. 92.2 92.0 0.72 0.1 0.6 55 20S 99. 76 6.7 533 2.1 2.5 565 95 92.3 92.6 92.5 0.72 0.1 0.6 75 20M 136 104 7.0 727 2.2 2.6 640 95 92. 93.1 93.0 0.72 0.1 0.6 90 315S 16 12 6.5 72 2.0 2.3 970 95 93.2 93.5 93.3 0.72 0.1 0.6 110 315M/L 19 151 6.5 1066 2.0 2.3 100 95 93.5 93. 93.6 0.72 0.1 0.6 132 315M/L 236 10 6.5 1279 2.0 2.4 110 95 93.7 93.9 93. 0.73 0.2 0.6 160 315M/L 26 21 6.5 1551 2.0 2.3 120 95 93.9 94.1 94.0 0.73 0.2 0.6 160 355M/L 279 213 6.7 1544 1.9 2.3 1630 990 94.0 94.3 94.2 0.75 0.4 0. 200 355M/L 347 265 6.7 1930 1.9 2.3 1755 990 94.2 94.5 94.5 0.75 0.4 0. 250 355M/L 434 331 6.7 2410 1.9 2.3 1950 990 94.2 94.5 94.5 0.75 0.4 0. 315 355M/L 547 417 6.7 3039 1.9 2.3 210 990 94.2 94.5 94.5 0.75 0.4 0.
Standard Efficiency IE1 Cast Iron Three Phase Motor Performance Data 750 RPM- Pole Frame Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 0.37 90S 1.4 1.13 3.5 5.20 1.9 2.2 21 60 52.0 5.0 59.0 0.42 0.52 0.61 0.55 90L 2.17 1.65 3.5 7.72 1.9 2.2 24 60 55.0 59.0 60.0 0.43 0.52 0.61 0.75 100L 2.3 1.2 4.0 10.5 2.0 2.4 33 60 62.0 67.0 6.0 0.46 0.5 0.67 1.1 100L 3.22 2.46 4.0 15.4 2.0 2.3 35 60 69.0 72.0 71.5 0.47 0.59 0.69 1.5 112M 4.27 3.25 4.5 20. 2.2 2.4 50 690 73.2 74.5 73.5 0.47 0.59 0.69 2.2 132S 5.77 4.4 5.0 29. 2.0 2.3 60 705 75. 7.0 77.5 0.50 0.62 0.71 3.0 132M 7.55 5.75 5.0 40.6 2.0 2.2 69 705 7.0 79.1 7.6 0.52 0.65 0.73 4.0 160M 9.71 7.4 5.2 53.1 2.0 2.3 101 720 79.5 2.0 1.5 0.52 0.65 0.73 5.5 160M 12.9 9.3 5.5 73.0 2.1 2.4 111 720 2.0 3.2 3.0 0.53 0.66 0.74 7.5 160L 17 13 5.7 99.5 2.2 2.4 132 720 4.0 5.5 5.0 0.54 0.67 0.75 9.2 10M 20.3 15.5 6.0 121 2.0 2.4 15 725 6.0 6.5 6.0 0.56 0.6 0.76 11.0 10L 24.0 1.3 6.0 145 2.1 2.4 176 725 7.0 7.5 7.0 0.56 0.6 0.76 15.0 200L 32.4 24.7 6.2 196 2.1 2.6 231 730 7.5.0.0 0.5 0.70 0.76 1.5 225S 3.5 29.4 6.6 242 2.0 2.4 270 730 9.0 90.0 90.0 0.60 0.71 0.77 22 225M 45.0 34.3 6.5 2 1.9 2.4 301 730 9.5 90.5 90.5 0.61 0.72 0.7 30 250S 60.2 45.9 6.0 390 1.9 2.5 31 735 91.0 91.2 91.0 0.62 0.73 0.79 37 250M 74.1 56.5 6.0 41 1.9 2.5 423 735 91.2 91.4 91.2 0.62 0.73 0.79 45 20S 9.4 6.1 5. 55 1. 2.4 535 735 91.6 92.1 92.0 0.63 0.74 0.79 55 20M 109 2. 5. 715 1.9 2.4 50 735 92.0 92.3 92.5 0.63 0.74 0.79 75 315S 144 109 5.9 96 1.9 2.2 1020 740 92.5 93.0 93.0 0.65 0.76 0.1 90 315M/L 169 129 5.9 1161 1.9 2.2 1100 740 93.0 93.4 93.5 0.66 0.77 0.2 110 315M/L 206 157 5.9 1420 1.9 2.2 1230 740 93.4 93. 93. 0.66 0.77 0.2 132 315M/L 247 1 5.9 1704 1.9 2.2 1320 740 93.6 94.0 94.0 0.66 0.77 0.2 132 355M/L 247 1 5. 1704 1. 2.2 1570 740 93.7 94.2 94.2 0.66 0.77 0.2 160 355M/L 29 227 6.0 2065 1. 2.2 1675 740 93.9 94.4 94.4 0.66 0.77 0.2 200 355M/L 372 24 6.0 251 1.9 2.3 1930 740 94.0 94.5 94.5 0.66 0.77 0.2 220 355M/L 410 312 6.0 239 1.9 2.3 200 740 94.0 94.5 94.5 0.66 0.77 0.2
Standard Efficiency IE1 Aluminum Three Phase Motor Performance Data (Frame No. 63-132) Standard efficiency IE1 multi mounting squirrel cage electric motors Aluminum frame IP55 Three-phase 50 Hz, 30V / 400V / 415V / 525V With PTC thermistors Class F insulation TEFC Standard Efficiency IE1 Aluminum Frame Three Phase Motor Performance Data 3000 RPM-2 Pole Frame Full load current In(A) Locked rotor 400V 525V current torque torque torque (RPM) 50 75 100 50 75 100 Il/In Full load (Nm) Locked rotor Tl/Tn Tb/Tn t(kg) Efficiency Power factor 0.1 63 0.55 0.42 5.2 0.632 2.4 2.4 6 2720 50.5 56.5 59.0 0.55 0.69 0.0 0.25 63 0.75 0.5 5.0 0.0 2.5 2.5 7 2720 52.0 57.0 60.0 0.56 0.70 0.1 0.37 71 0.99 0.76 5. 1.29 2.3 2.4 2740 62.0 66.5 67.0 0.56 0.70 0.1 0.55 71 1.42 1.09 5. 1.92 2.2 2.3 9 2740 65.0 67.0 6.0 0.5 0.72 0.2 0.75 0 1.77 1.4 6.1 2.52 2.2 2.6 10 240 72.0 74.0 74.0 0.62 0.76 0.3 1.1 0 2.49 1.9 6.3 3.70 2.2 2.6 11 240 73. 75. 75. 0.65 0.7 0.4 1.5 90S 3.2 2.5 6.3 5.05 2.3 2.6 16 240 76 7.5 7.5 0.63 0.76 0.4 2.2 90L 4.61 3.51 6. 7.40 2.6 2.9 1 240 7 0.0 1.0 0.63 0.77 0.5 3.0 100L 6.07 4.62 7.0 10.0 2.5 2. 26 260 1.5 2.0 2.0 0.69 0.1 0.7 4.0 112M 7.4 6 7.2 13.3 2.3 2.6 35 20 2 3.7 3.7 0.71 0.2 0. 5.5 132S 10.5.0 7.5 1.1 2.2 3.0 4 2900 5 6.0 6.0 0.72 0.2 0. 7.5 132S 14.3 10.9 7.2 24.7 2.2 2.7 53 2900 5.5 6.5 6.5 0.72 0.2 0. 9.2 132M 17.4 13.3 7.5 30.3 2.3 2.9 61 2900 6 7.0 7.0 0.72 0.2 0. Standard Efficiency IE1 Aluminum Frame Three Phase Motor Performance Data 1500 RPM-4 Pole Frame Breakdown Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 0.1 63 0.61 0.47 4.0 1.31 2.1 2.2 7 1310 54.0 56.0 5.0 0.51 0.64 0.73 0.25 71 0.79 0.6 5.0 1.0 2.1 2.3 1330 55.0 59.0 62.0 0.52 0.65 0.74 0.37 71 1.15 0. 5.0 2.66 2.1 2.3 9 1330 59.0 63.0 63.0 0.52 0.65 0.74 0.55 0 1.49 1.14 5.2 3.7 2.3 2.4 10 1390 65.0 70.0 71.0 0.53 0.66 0.75 0.75 0 1.94 1.4 5.2 5.15 2.3 2.4 11 1390 70.0 72.0 72.3 0.56 0.6 0.77 1.1 90S 2.6 2.04 5.4 7.56 2.3 2.4 16 1390 70.0 75.0 76.0 0.55 0.69 0.7 1.5 90L 3.50 2.67 5.5 10.3 2.4 2.6 1 1390 75.5 77.7 7.2 0.5 0.73 0.79 2.2 100L 4.4 3.69 5.6 14.9 2.3 2.6 27 1410 0.0 1.0 1.0 0.60 0.73 0.1 3.0 100L 6.43 4.9 5. 20.3 2.4 2.7 29 1410 0.0 1. 2.2 0.60 0.73 0.2 4.0 112M.36 6.37 6.3 26.6 2.3 2.7 39 1435 2. 3. 4.2 0.64 0.76 0.2 5.5 132S 11.1.46 6.5 36.5 2.1 2.6 50 1440 4.5 5.6 6.0 0.63 0.77 0.3 7.5 132M 14. 11.3 6.9 49.7 2.3 2.7 61 1440 5.0 6.5 7.0 0.63 0.77 0.4 9.2 132M 1.1 13. 7.5 60.6 2.4 2.9 72 1450 6. 7.5 7.4 0.64 0.77 0.4
Standard Efficiency IE1 Aluminum Frame Three Phase Motor Performance Data 1000 RPM-6 Pole Frame 0.25 71 0.92 0.7 3.6 2.1 1.9 2.1 9 50 51.0 5.0 60.0 0.46 0.56 0.66 0.37 0 1.21 0.92 3.6 3. 1.9 2.1 11 910 55.0 60.0 63.0 0.4 0.60 0.70 0.55 0 1.67 1.27 3.6 5.77 1.9 2.1 13 910 59.0 64.0 66.0 0.49 0.62 0.72 0.75 90S 2.15 1.64 4.2 7.79 2.1 2.3 16 920 6.0 70.0 70.0 0.51 0.63 0.72 1.1 90L 2.9 2.3 4.3 11.4 2.1 2.3 1 920 70.0 72.0 73.0 0.52 0.64 0.73 1.5 100L 3.75 2.6 5.0 15.4 2.2 2.4 24 930 76.0 77.0 76.0 0.54 0.6 0.76 2.2 112M 5.36 4.09 5.1 22.5 2.2 2.4 36 935 7.0 7.5 7.0 0.55 0.6 0.76 3.0 132S 6.91 5.26 5.9 29. 2.1 2.5 47 960 0.0 2.5 2.5 0.5 0.70 0.76 4.0 132M 9.04 6.9 6.2 39. 2.2 2.6 56 960 1.4 3. 4.0 0.5 0.70 0.76 5.5 132M 12.2 9.3 6.4 54.7 2.3 2.6 65 960 2.5 4.5 4. 0.59 0.71 0.77 Standard Efficiency IE1 Aluminum Frame Three Phase Motor Performance Data 750 RPM- Pole Frame Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 0.37 90S 1.4 1.13 3.5 5.20 1.9 2.2 16 60 52.0 5.0 59.0 0.42 0.52 0.61 0.55 90L 2.17 1.65 3.5 7.72 1.9 2.2 1 60 55.0 59.0 60.0 0.43 0.52 0.61 0.75 100L 2.3 1.2 4.0 10.5 2.0 2.4 25 60 62.0 67.0 6.0 0.46 0.5 0.67 1.1 100L 3.22 2.46 4.0 15.4 2.0 2.3 27 60 69.0 72.0 71.5 0.47 0.59 0.69 1.5 112M 4.27 3.25 4.5 20. 2.2 2.4 40 690 73.2 74.5 73.5 0.47 0.59 0.69 2.2 132S 5.77 4.4 5.0 29. 2.0 2.3 47 705 75. 7.0 77.5 0.50 0.62 0.71 3.0 132M 7.55 5.75 5.0 40.6 2.0 2.2 54 705 7.0 79.1 7.6 0.52 0.65 0.73
High Efficiency IE2 Cast Iron Three Phase Motor Performance Data High efficiency IE2 squirrel cage electric motors Cast iron frame IP66 Three-phase 50 Hz 30V / 400V / 415V / 525V / 550V With PTC thermistors Class H insulation TEFC RPM values are based on 400V. High Efficiency IE2 Cast Iron Frame IP66 Performance Data 3000 RPM - 2 Pole Frame Full load Locked Full Locked Breakdown Efficiency Power factor current In(A) rotor load rotor current torque torque torque t(kg) 400V 525V (RPM) 50 75 100 50 75 100 Il/In (Nm) Tl/Tn Tb/Tn 0.1 63 0.52 0.4 5.5 0.63 2.2 2.3 9 2730 56.0 62.0 63.0 0.54 0.69 0.79 0.25 63 0.69 0.53 5.5 0.7 2.2 2.3 10 2730 5.0 64.0 65.0 0.55 0.70 0.0 0.37 71 0.93 0.71 6.1 1.2 2.2 2.3 12 2750 6.0 71.0 71.0 0.60 0.74 0.1 0.55 71 1.34 1.02 6.1 1.91 2.2 2.3 13 2750 70.0 72.0 72.0 0.61 0.75 0.2 0.75 0 1.67 1.27 6.2 2.51 2.3 2.6 15 250 77.0 7.0 7.0 0.62 0.76 0.3 1.1 0 2.3 1.1 6.5 3.69 2.3 2.6 16 250 79.5 0.5 0.5 0.63 0.76 0.3 1.5 90S 3.14 2.39 6. 5.03 2.3 2.6 23 250 1.5 2.0 2.0 0.65 0.77 0.4 2.2 90L 4.49 3.42 6. 7.37 2.4 2.7 26 250 2.7 3.3 3.3 0.66 0.7 0.5 3.0 100L 5.7 4.47 7.5 9.9 2.3 2.6 36 270 3. 4. 4. 0.69 0.1 0.7 4.0 112M 7.63 5.1 7.5 13.2 2.2 2.6 46 290 5.0 6.0 6.0 0.70 0.2 0. 5.5 132S 10.4 7.9 7.5 1.1 2.2 2. 63 2910 6.0 7.0 7.0 0.72 0.2 0. 7.5 132S 14.0 10.6 7.5 24.6 2.2 2.6 6 2910 7.0.1.1 0.72 0.2 0. 9.2 132M 17.0 13.0 7.6 30.2 2.3 2. 7 2910 7... 0.72 0.2 0. 11.0 160M 19. 15.1 7.0 35. 2.2 2.7 110 2935 5.5 90.0 90.0 0.73 0.3 0.9 15.0 160M 26. 20.4 7.0 4. 2.3 2. 120 2935 90.2 90. 90. 0.73 0.3 0.9 1.5 160L 32.9 25.1 7.2 60.1 2.4 2. 140 2935 90.5 91.2 91.2 0.73 0.3 0.9 22 10M 39.0 29.7 7.2 71.5 2.2 2.7 175 2940 91.0 91.4 91.4 0.74 0.3 0.9 30 200L 52.7 40.2 6. 97.1 2.2 2.5 235 2950 92.0 92.4 92.3 0.75 0.3 0.9 37 200L 64.7 49.3 7.0 120 2.3 2.6 255 2950 92.4 92. 92. 0.76 0.4 0.9 45 225M 7.4 59.7 7.0 145 2.2 2. 320 2965 92. 93.1 93.1 0.7 0.5 0.9 55 250S 95.3 72.6 7.5 177 2.2 2. 410 2970 93.3 93.6 93.6 0.7 0.5 0.9 75 250M 129 9.6 7. 241 2.2 2.9 455 2970 93.7 94.0 94.0 0.7 0.5 0.9 90 20S 153 117 7. 29 2.0 2.6 620 2975 93. 94.3 94.3 0.79 0.6 0.90 110 20M 17 142 7. 353 2.2 2.7 670 2975 94.0 94.5 94.5 0.79 0.6 0.90 132 315S 221 16 7.6 424 2.0 2. 1020 2975 94.3 94.9 94.9 0.79 0.7 0.91 160 315M/L 267 204 7.5 514 2.1 2. 1160 2975 94.5 95.0 95.0 0.79 0.7 0.91 15 315M/L 30 235 7.5 594 2.1 2.6 1200 2975 94.7 95.2 95.2 0.79 0.7 0.91 200 315M/L 333 254 7.5 642 2.2 2.6 1245 2975 94.7 95.2 95.2 0.0 0. 0.91 250 355M/L 417 317 7.9 01 2.1 2.6 1750 290 94. 95.2 95.2 0.6 0.9 0.91 315 355M/L 519 396 7. 1009 2.2 2.7 2100 290 94. 95.2 95.2 0.7 0.90 0.92 355 355A/B 591 451 7. 1136 2.0 2.5 2350 295 94. 95.2 95.2 0.6 0.9 0.91 400 355A/B 666 50 7. 120 2.0 2.5 2550 295 94. 95.2 95.2 0.6 0.9 0.91
High efficiency IE2 Cast Iron Frame IP66 Performance Data 1500 RPM-4 Pole Frame Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 0.1 63 0.5 0.44 4.4 1.29 2.1 2.2 10 1330 59.0 61.0 61.0 0.50 0.64 0.73 0.25 71 0.74 0.56 5.0 1.77 2.1 2.2 12 1350 63.0 66.0 66.0 0.52 0.65 0.74 0.37 71 1.05 0. 5.2 2.62 2.1 2.2 13 1350 65.0 6.0 6.0 0.54 0.66 0.75 0.55 0 1.41 1.0 5.6 3.73 2.3 2.5 16 1410 73.0 74.0 74.0 0.55 0.67 0.76 0.75 0 1.76 1.34 6.0 5.0 2.3 2.6 1 1410 79.0 79.6 79. 0.5 0.69 0.77 1.1 90S 2.50 1.91 6.5 7.37 2.3 2.5 23 1425 0.6 1.4 1.4 0.59 0.70 0.7 1.5 90L 3.31 2.52 6.3 10.1 2.4 2.6 27 1425 1.5 2. 2. 0.60 0.72 0.79 2.2 100L 4.65 3.54 7.0 14.6 2.3 2.6 3 1440 3. 4.3 4.3 0.62 0.73 0.1 3.0 100L 6.1 4.71 7.2 19.9 2.4 2.7 40 1440 4.9 5.5 5.5 0.63 0.74 0.2 4.0 112M.13 6.2 7.0 26.3 2.3 2.6 52 1450 5.9 6.6 6.6 0.64 0.75 0.2 5.5 132S 10.9.31 7.2 36.1 2.1 2.7 6 1455 7.0 7.7 7.7 0.64 0.76 0.3 7.5 132M 14.5 11.1 7.0 49.2 2.3 2. 7 1455.0.7.7 0.65 0.77 0.4 9.2 132M 17.7 13.5 7.5 60.4 2.4 2.9 2 1455.6 9.3 9.3 0.65 0.77 0.4 11.0 160M 21.1 16.1 7.0 71.7 2.3 2. 125 1465. 9. 9. 0.65 0.77 0.4 15.0 160L 2.1 21.4 7.0 97. 2.3 2. 140 1465 9.6 90.6 90.6 0.66 0.7 0.5 1.5 10M 34.1 26.0 7.2 120 2.2 2.6 170 1470 91.0 91.4 91.2 0.67 0.7 0.6 22 10L 40.3 30.7 7.2 143 2.2 2.6 195 1470 91.4 91. 91.6 0.67 0.7 0.6 30 200L 54.6 41.6 7.0 195 2.2 2.6 250 1470 92.0 92.5 92.3 0.6 0.7 0.6 37 225S 66.2 50.5 6. 239 2.2 2.6 315 140 92.4 92.7 92.7 0.71 0.1 0.7 45 225M 0.2 61.1 7.1 290 2.2 2.7 340 140 92.7 93.2 93.1 0.72 0.2 0.7 55 250S/M 97.6 74.4 7.0 355 2.2 2.6 430 140 93.0 93.4 93.5 0.72 0.2 0.7 75 250S/M 132 101 7.2 44 2.2 2.7 490 140 93.5 93.9 94.0 0.73 0.2 0.7 90 20S 159 121 7.2 579 2.2 2.5 660 145 93.6 94.2 94.2 0.75 0.3 0.7 110 20M 193 147 7.3 707 2.3 2.6 720 145 93. 94.5 94.5 0.75 0.3 0.7 132 315S 229 174 6.9 49 2.2 2.4 1110 145 94.1 94.7 94.7 0.75 0.4 0. 160 315M/L 277 211 6.9 1029 2.4 2.6 1200 145 94.3 94.9 94.9 0.75 0.4 0. 15 315M/L 319 243 6.9 1190 2.4 2.6 1240 145 94.4 95.0 95.0 0.75 0.4 0. 200 315M/L 345 263 6.9 126 2.4 2.6 1300 145 94.6 95.2 95.2 0.76 0.4 0. 250 355M/L 421 321 7.4 1602 2.1 2.5 170 1490 94.6 95.2 95.2 0.7 0.6 0.90 315 355M/L 531 404 7.5 2019 2.2 2.5 190 1490 94.6 95.2 95.2 0.7 0.6 0.90 355 355A/B 605 461 7.5 2275 2.2 2.5 2350 1490 94.6 95.2 95.2 0.77 0.5 0.9 400 355A/B 69 525 7.5 2564 2.2 2.5 2550 1490 94.6 95.2 95.2 0.76 0.4 0.
High Efficiency IE2 Cast Iron Frame IP66 Performance Data 1000 RPM-6 Pole frame Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 0.25 71 0.7 0.66 4.0 2.74 1.9 2.0 13 70 53.0 60.0 61.0 0.47 0.5 0.6 0.37 0 1.11 0.4 4.0 3.93 1.9 2.0 16 900 63.0 67.0 67.0 0.50 0.63 0.72 0.55 0 1.55 1.1 4.0 5.4 1.9 2.0 1 900 65.0 71.0 71.0 0.50 0.63 0.72 0.75 90S 1.9 1.51 4. 7.70 2.1 2.3 23 930 74.5 76.0 76.0 0.51 0.63 0.72 1.1 90L 2.7 2.12 4.9 11.3 2.1 2.3 27 930 76.0 7.1 7.1 0.52 0.64 0.73 1.5 100L 3.61 2.75 5.5 15.2 2.2 2.5 36 945 79.5 0.0 0.0 0.53 0.67 0.75 2.2 112M 5.16 3.93 5.5 22.2 2.2 2.5 50 945 1.4 2.0 2.0 0.53 0.67 0.75 3.0 132S 6.91 5.27 6.0 29. 2.1 2.4 66 960 2.5 3.5 3.5 0.54 0.6 0.75 4.0 132M.9 6.4 6.2 39. 2.2 2.5 76 960 3.6 4.6 4.6 0.56 0.70 0.76 5.5 132M 12.1 9.25 6.4 54.7 2.3 2.7 5 960 5.2 6.0 6.0 0.56 0.70 0.76 7.5 160M 15.7 11.9 6.6 73. 2.1 2.6 11 970 7.2 7.6 7.5 0.61 0.73 0.79 9.2 160L 19.0 14.5 6.6 90.6 2.2 2.6 133 970.0.4.3 0.61 0.73 0.79 11.0 160L 22.6 17.2 6.7 10 2.3 2.7 144 970.6 9.1 9.0 0.62 0.74 0.79 15.0 10L 29.4 22.4 7.0 147 2.2 2. 195 975 9.5 9.9 9.7 0.65 0.76 0.2 1.5 200L 36.0 27.4 6. 10 2.1 2.5 233 90 90.2 90.6 90.4 0.65 0.76 0.2 22 200L 42.6 32.5 7.0 214 2.2 2.6 245 90 90.7 91.0 90.9 0.65 0.76 0.2 30 225M 56.2 42. 6.6 291 2.1 2.5 320 95 91.6 91. 91.7 0.70 0.79 0.4 37 250S/M 67.4 51.3 6.9 359 2.2 2.6 396 95 92.1 92.4 92.2 0.72 0.1 0.6 45 250S/M 1.5 62.1 6. 436 2.3 2.6 43 95 92.6 92. 92.7 0.72 0.1 0.6 55 20S 99.2 75.5 6. 531 2.2 2.6 55 990 92.9 93.2 93.1 0.72 0.1 0.6 75 20M 134 102 7.0 723 2.3 2.7 660 990 93.5 93. 93.7 0.72 0.1 0.6 90 315S 161 122 6.6 6 2.1 2.4 1000 990 93. 94.1 94.0 0.72 0.1 0.6 110 315M/L 196 149 6.6 1061 2.1 2.4 1110 990 94.0 94.4 94.3 0.72 0.1 0.6 132 315M/L 234 17 6.6 1273 2.1 2.5 1210 990 94.2 94.6 94.6 0.73 0.2 0.6 160 355M/L 23 216 6. 1543 2.0 2.4 1690 990 94.4 94. 94. 0.73 0.2 0.6 200 355M/L 353 269 6. 1929 2.0 2.4 120 990 94.6 95.0 95.0 0.73 0.2 0.6 250 355M/L 442 337 6. 2412 2.0 2.4 2000 990 94.6 95.0 95.0 0.73 0.2 0.6 315 355A/B 557 424 6. 3039 2.0 2.3 2400 990 94.6 95.0 95.0 0.73 0.2 0.6 355 355A/B 627 47 6. 3424 2.0 2.3 2600 990 94.6 95.0 95.0 0.73 0.2 0.6
High Efficiency IE2 Cast Iron Frame IP66 Performance Data 750 RPM- Pole frame Full load Locked Full Locked Breakdown current In(A) rotor load rotor Efficiency Power factor current torque torque torque t(kg) 400V 525V (RPM) Il/In (Nm) Tl/Tn Tb/Tn 50 75 100 50 75 100 0.37 90S 1.41 1.0 4.0 5.20 1.9 2.1 22 60 56.0 62.0 62.0 0.40 0.51 0.61 0.55 90L 2.03 1.55 4.0 7.72 1.9 2.1 25 60 61.0 64.0 64.0 0.40 0.51 0.61 0.75 100L 2.21 1.69 4.5 10.4 2.1 2.4 29 690 71.0 73.0 73.0 0.50 0.57 0.67 1.1 100L 3.07 2.34 4.5 15.2 2.0 2.2 34 690 72.0 75.0 75.0 0.60 0.59 0.69 1.5 112M 4.02 3.06 4.7 20.6 2.3 2.5 4 695 75.0 77.0 77.0 0.50 0.60 0.70 2.2 132S 5.44 4.15 5.5 29.6 2.2 2.5 66 710 1.0 1.5 1.0 0.52 0.65 0.72 3.0 132M 7.23 5.51 5.5 40.4 2.3 2.5 75 710 2.0 2.5 2.0 0.54 0.66 0.73 4.0 160M 9.30 7.09 5.5 53.1 2.0 2.4 110 720 4.0 5.0 5.0 0.54 0.66 0.73 5.5 160M 12.5 9.56 5.6 73.0 2.0 2.4 120 720 5.0 6.0 5.5 0.55 0.67 0.74 7.5 160L 16.6 12.6 5.6 99.5 2.0 2.4 140 720 6.0 7.0 7.0 0.56 0.6 0.75 9.2 10M 20 15.2 6.3 121 2.0 2.5 165 725 7.0 7.5 7.5 0.57 0.69 0.76 11 10L 23.7 1.1 6.3 145 2.1 2.5 12 725 7.5.0.0 0.57 0.69 0.76 15 200L 31.9 24.3 6.2 196 2.0 2.5 240 730. 9.3 9.3 0.5 0.70 0.76 1.5 225S 3.3 29.2 6.5 242 1.9 2.5 20 730 90.4 90.7 90.6 0.59 0.71 0.77 22 225M 44.6 34 6.5 2 1.9 2.5 310 730 91.0 91.3 91.3 0.60 0.72 0.7 30 250S/M 59.6 45.4 6.0 390 1.9 2.4 400 735 91.5 92.0 92.0 0.62 0.74 0.79 37 250S/M 73.2 55.7 6.0 41 1.9 2.4 425 735 92.0 92.4 92.4 0.62 0.74 0.79 45 20S 7.5 66.7 5. 51 1.9 2.3 50 740 92.4 92. 92. 0.64 0.75 0.0 55 20M 106 1.1 5. 710 1.9 2.3 630 740 92. 93.2 93.2 0.64 0.75 0.0 75 315S 141 107 5.9 96 1. 2.2 1020 740 93.2 93.6 93.7 0.66 0.77 0.2 90 315M/L 169 12 6.0 1161 1.9 2.3 1130 740 93.6 94.0 94.0 0.66 0.77 0.2 110 315M/L 205 156 6.0 1420 1.9 2.3 1240 740 93.9 94.3 94.3 0.66 0.77 0.2 132 355M/L 246 17 6.3 1704 1. 2.3 1700 740 94.2 94.6 94.6 0.67 0.77 0.2 160 355M/L 297 226 6.4 2065 1.9 2.3 120 740 94.4 94. 94. 0.67 0.77 0.2 200 355M/L 371 22 6. 251 2.0 2.4 190 740 94.6 95.0 95.0 0.67 0.77 0.2 250 355A/B 463 353 6.5 3226 1. 2.4 2400 740 94.6 95.0 95.0 0.67 0.77 0.2 315 355A/B 54 445 7.0 4065 1. 2.4 2600 740 94.6 95.0 95.0 0.67 0.77 0.2
HA HA H H G P N HD HD GD P N HF HF HG HG G GD HA H AC HD G GD Mechanical data Standard efficiency IE1 cast iron three phase motor Mechanical data (Frame No. 0-355) Standard efficiency IE1 aluminum three phase motor Mechanical data (Frame No. 0-132) The B3 model motors of the frame with feet and end shield without flange are showed in chart 1, the mechanical data are showed in table 1. F AD D BC K AA E C B BB A L AB Chart 1 The B3 model motors of the frame with feet and end shield without flange 图 1 机座上带底脚 端盖上无凸缘的电动机的尺寸图 The B5 model motors of the frame without feet and end shield with flange are showed in chart 2, the mechanical data are showed in table 2. F AD AD 22.5 45 D n-s n-s R M M T E LA L(B5) L1(V1) 0~200 225~355 Chart 2 The B5 model motors of the frame without feet and endshield with flange 图 3 卧式安装或立式安装, 机座不带底脚 端盖上有凸缘 ( 带通孔 ) 的电动机尺寸图 The B35 model motors of the frame with feet and end shield with flange are showed in chart 3, the mechanical data are showed in table 3. 45 AD n-s 22.5 AD n-s F R M M D T E BC LA C B BB L(B5) K A AB AA K A AB AA L1(V1) 0~200 225~355 Chart 3 The B35 model motors of the frame with feet and end shield with flange 图 2 机座带底脚 端盖上有凸缘 ( 带通孔 ) 的电动机的尺寸图
The mechanical data of the B3 model motors are showed in table 1. Table 1 mm Frame No. mounting dimensions Outline dimensions A B C D E F G GD H K AB AC AD BB HD L 63 100 0 40 11 23 4.5 4 63 135 130 110 110 10 230 7 71 112 90 45 14 30 5 11 5 71 150 145 120 120 195 255 0 125 50 19 40 6 15.5 6 0 160 176 145 130 220 295 100 90S 10 140 320 140 56 24 50 20 90 10 12 155 250 90L 125 165 345 7 100L 160 63 100 200 215 10 176 270 35 2 60 24 112M 190 140 70 112 12 226 223 190 10 300 400 132S 16 470 216 9 3 0 10 33 132 262 263 210 345 132M 17 224 510 160M 210 25 615 254 10 42 12 37 160 314 316 255 420 160L 254 302 670 14.5 10M 241 311 700 279 121 4 110 14 42.5 9 10 349 357 20 455 10L 279 349 740 200L 31 305 133 200 3 397 305 369 505 770 55 16 49 10 225M(2P) 311 393 20 1.5 225S(4~P) 356 26 149 225 431 44 335 36 560 15 225M(4~P) 311 60 1 53 11 393 45 250S/M(2P) 406 311/349 16 140 250 44 493 370 445 615 910 250S/M(4~P) 70 20 62.5 12 20S(2P) 36 24 49 95 65 1 5 11 20M(2P) 419 540 1035 457 190 20 542 54 410 60 20S(4~P) 36 49 1015 0 170 22 71 14 20M(4~P) 419 540 1065 315S(2P) 406 570 110 315M(2P) 457 65/70* 140/140* 1/20* 5/62.5* 11/12* 1290 60 315L(2P) 50 1290 50 216 315 62 620 530 45 315S(4~P) 406 570 1210 315M(4~P) 457 5/90* 170/170* 22/25* 76/1* 14/14* 1320 2 60 315L(4~P) 50 1320 355M/L(2P) 90 170 25 1 14 1530 560/630 750 355M/L(4~P) 100 210 2 90 16 1570 610 254 355 726 700 655 1010 355A/B (2P) 90 170 25 1 14 1730 710/00 950 355A/B(4-P) 100 210 2 90 16 1770 *The dimension behind / is for 15 and larger
The mechanical data of the B5 model motors are showed in table 2 Table 2 mounting dimensions Frame No. Outline dimensions D E F G GD M N P R S T n AD HG HF L L1 LA 63 11 23 4.5 4 115 95 140 10 3 110 110 200 230 20 71 14 30 5 11 5 130 110 160 10 3.5 120 120 220 255 305 0 19 40 6 15.5 6 145 145 230 295 335 3.5 90S 165 130 200 12 320 360 24 50 20 155 155 250 90L 345 35 7 100L 10 10 300 35 435 2 60 24 215 10 250 112M 4 4 190 190 330 400 450 15 132S 470 520 3 0 10 33 265 230 300 210 210 375 132M 510 560 160M 615 675 42 12 37 255 255 465 160L 670 730 300 250 350 10M 700 760 4 110 14 42.5 9 20 20 535 10L 740 00 200L 350 300 400 305 305 55 770 30 55 16 49 10 225M(2P) 20 0 225S(4P) 400 350 450 335 335 645 15 75 0 19 5 225M(4~P) 60 1 53 11 45 905 250S/M(2P) 140 370 370 690 910 970 250S/M(4~P) 70 20 62.5 12 20S(2P) 95 1055 65 1 5 11 500 450 550 20M(2P) 1035 1105 410 410 75 20S(4~P) 1015 105 0 170 22 71 14 20M(4~P) 1065 1135 315S(2P) 110 1250 315M(2P) 65/70* 140/140* 1/20* 5/62.5* 11/12* 1290 1360 315L(2P) 1290 1360 600 550 660 530 530 90 315S(4~P) 1210 120 315M(4~P) 5/90* 170/170* 22/25* 76/1* 14/14* 1320 1390 24 6 315L(4~P) 1320 1390 355M/L(2P) 90 170 25 1 14 1530 1610 355M/L(4~P) 100 210 2 90 16 1570 1650 740 60 00 655 655 1160 355A/B(2P) 90 170 25 1 14 1730 110 355A/B(4-P) 100 210 2 90 16 1770 150 *The dimension behind / is for 15 and larger mm 10 12 14 15 1 20 22
The mechanical data of the B35 model motors are showed in table 3. Table 3 mm mounting dimensions Outline dimensions Frame No. A B C D E F G GD M N P R S T n H K AB AD BB HD L L1 LA 63 100 0 40 11 23 4.5 4 115 95 140 3 63 135 110 110 10 230 20 10 7 10 71 112 90 45 14 30 5 11 5 130 110 160 71 150 120 120 195 255 305 0 125 50 19 40 6 15.5 6 3.5 0 160 145 130 220 295 335 100 90S 165 130 200 12 10 140 320 360 12 140 56 24 50 20 90 10 155 250 90L 125 165 345 35 7 100L 160 63 100 200 10 176 270 35 435 2 60 24 215 10 250 112M 190 140 70 4 112 226 1901 10 300 400 450 15 4 12 14 132S 16 470 520 216 9 3 0 10 33 265 230 300 132 262 210 345 132M 17 224 510 560 160M 210 25 615 675 254 10 42 12 37 160 314 255 420 15 160L 254 302 670 730 300 250 350 14.5 10M 241 311 700 760 279 121 4 110 14 42.5 9 10 349 20 455 10L 279 349 740 00 1 200L 31 305 133 350 300 400 200 3 305 369 505 770 30 55 16 49 10 225M(2P) 311 393 20 0 1.5 225S(4P) 356 26 149 400 350 450 225 431 335 36 560 15 75 20 19 5 225M(4~P) 311 60 1 53 11 0 393 45 905 250S/M(2P) 406 311/349 16 140 250 44 370 445 615 910 970 250S/M(4~P) 70 20 62.5 12 20S(2P) 36 49 95 1055 65 1 5 11 500 450 550 24 20M(2P) 419 540 1035 1105 457 190 20 542 410 60 20S(4~P) 36 49 1015 105 0 170 22 71 14 20M(4~P) 419 540 1065 1135 315S(2P) 406 570 110 1250 140 315M(2P) 457 65/70* /140* 1/20* 5/62.5* 11/12* 1290 1360 60 22 315L(2P) 50 1290 1360 50 216 600 550 660 315 62 530 45 315S(4~10P) 406 570 1210 120 170 315M(4~10P) 457 5/90* /170* 22/25* 76/1* 14/14* 1320 1390 24 6 2 60 315L(4~10P) 50 1320 1390 355M/L(2P) 90 170 25 1 14 1530 1610 560/630 750 355M/L(4~P) 100 210 2 90 16 1570 1650 610 254 740 60 00 355 726 655 1010 355A/B(2P) 90 170 25 1 14 1730 110 710/00 950 355A/B(4~P) 100 210 2 90 16 1770 150 *The dimension behind / is for 15 and larger
HA HA H H P N HD HD G GD P N HF HF HG HG G GD HA H AC HD G GD High efficiency IE2 cast iron three phase motor Mechanical data The B3 model motors of the frame with feet and end shield without flange are showed in chart 4, the mechanical data are showed in table 4. F AD D E C BC L B BB K A AB AA Chart 4 The B3 model motors 图 1 机座上带底脚 端盖上无凸缘的电动机的尺寸图 of the frame with feet and end shield without flange The B5 model motors of the frame without feet and end shield with flange are showed in chart 5, the mechanical data are showed in table 5. F D 45 AD n-s 22.5 AD n-s R M M T E LA L(B5) L1(V1) 0~200 225~355 Chart 5 The B5 model motors of the frame without feet and end shield with flange 图 3 卧式安装或立式安装, 机座不带底脚 端盖上有凸缘 ( 带通孔 ) 的电动机尺寸图 The B35 model motors of the frame with feet and end shield with flange are showed in chart 6, the mechanical data are showed in table 6. F D 45 AD n-s 22.5 AD n-s R M M T E BC LA C B BB L(B5) K A AB AA K A AB AA L1(V1) 0~200 225~355 Chart 6 The B35 model motors of the frame with feet and end shield with flange 图 2 机座带底脚 端盖上有凸缘 ( 带通孔 ) 的电动机的尺寸图
The mechanical data of the B3 model motors are showed in table 4. Table 4 mm Frame No. *The dimension behind / is for 15 and larger mounting dimensions Outline dimensions A B C D E F G GD H K AB AC AD BB HD L 63 100 0 40 11 23 4.5 4 63 135 130 110 110 10 250 7 71 112 90 45 14 30 5 11 5 71 150 145 120 120 195 275 0 125 50 19 40 6 15.5 6 0 160 176 145 130 220 305 100 90S 10 140 360 140 56 24 50 20 90 10 12 155 250 90L 125 165 390 7 100L 160 63 100 200 215 10 176 270 435 2 60 24 112M 190 140 70 112 12 226 223 190 10 300 470 132S 16 510 216 9 3 0 10 33 132 262 263 210 345 132M 17 224 560 160M 210 25 670 254 10 42 12 37 160 314 316 255 420 160L 254 302 700 14.5 10M 241 311 740 279 121 4 110 14 42.5 9 10 349 357 20 455 10L 279 349 790 200L 31 305 133 200 3 397 305 369 505 770 55 16 49 10 225M(2P) 311 393 30 1.5 225S(4~P) 356 26 149 225 431 44 335 36 560 25 225M(4~P) 311 60 1 53 11 393 55 250S/M(2P) 406 311/349 16 140 250 44 493 370 445 615 915 250S/M(4~P) 70 20 62.5 12 20S(2P) 36 24 49 95 65 1 5 11 20M(2P) 419 540 1035 457 190 20 542 54 410 60 20S(4~P) 36 49 1015 0 170 22 71 14 20M(4~P) 419 540 1065 315S(2P) 406 570 1200 315M(2P) 457 65/70* 140/140* 1/20* 5/62.5* 11/12* 1310 60 315L(2P) 50 1310 50 216 315 62 620 530 45 315S(4~P) 406 570 1230 315M(4~P) 457 5/90* 170/170* 22/25* 76/1* 14/14* 1340 2 60 315L(4~P) 50 1340 355M/L(2P) 90 170 25 1 14 1550 560/630 750 355M/L(4~P) 100 210 2 90 16 1590 610 254 355 726 700 655 1010 355A/B (2P) 90 170 25 1 14 1750 710/00 950 355A/B(4-P) 100 210 2 90 16 1790
The mechanical data of the B5 model motors are showed in table 5 Frame No. mounting dimensions Table 5 Outline dimensions D E F G GD M N P R S T n AD HG HF L L1 LA 63 11 23 4.5 4 115 95 140 10 3 0 19 40 6 15.5 6 145 145 230 305 345 3.5 90S 165 130 200 12 360 400 24 50 20 155 155 250 90L 390 430 7 100L 10 10 300 435 45 2 60 24 215 10 250 112M 4 4 190 190 330 470 520 15 132S 510 560 3 0 10 33 265 230 300 210 210 375 132M 560 610 160M 670 730 42 12 37 255 255 465 160L 700 760 300 250 350 10M 740 00 4 110 14 42.5 9 20 20 535 10L 790 50 200L 350 300 400 305 305 55 790 50 55 16 49 10 225M(2P) 30 90 225S(4P) 400 350 450 335 335 645 25 5 0 19 5 225M(4~P) 60 1 53 11 55 915 250S/M(2P) 140 370 370 690 915 975 250S/M(4~P) 70 20 62.5 12 20S(2P) 95 1055 65 1 5 11 500 450 550 20M(2P) 1035 1105 410 410 75 20S(4~P) 1015 105 0 170 22 71 14 20M(4~P) 1065 1135 315S(2P) 1200 1270 315M(2P) 65/70* 140/140* 1/20* 5/62.5* 11/12* 1310 130 315L(2P) 1310 130 600 550 660 530 530 90 315S(4~P) 1230 1300 315M(4~P) 5/90* 170/170* 22/25* 76/1* 14/14* 1340 1410 24 6 315L(4~P) 1340 1410 355M/L(2P) 90 170 25 1 14 1550 1630 355M/L(4~P) 100 210 2 90 16 1590 1670 740 60 00 655 655 1160 355A/B(2P) 90 170 25 1 14 1750 130 355A/B(4-P) 100 210 2 90 16 1790 170 mm 110 110 200 250 290 71 14 30 5 11 5 130 110 160 10 3.5 120 120 220 275 315 *The dimension behind / is for 15 and larger 10 12 14 15 1 20 22
The mechanical data of the B35 model motors are showed in table 6. Table 6 mm mounting dimensions Outline dimensions Frame No. A B C D E F G GD M N P R S T n H K AB AD BB HD L L1 LA 63 100 0 40 11 23 4.5 4 115 95 140 3 63 135 110 110 10 250 290 10 7 10 71 112 90 45 14 30 5 11 5 130 110 160 71 150 120 120 195 275 315 0 125 50 19 40 6 15.5 6 3.5 0 160 145 130 220 305 345 100 90S 165 130 200 12 10 140 360 400 12 140 56 24 50 20 90 10 155 250 90L 125 165 390 430 7 100L 160 63 100 200 10 176 270 435 45 2 60 24 215 10 250 112M 190 140 70 4 112 226 1901 10 300 470 520 15 4 12 14 132S 16 510 560 216 9 3 0 10 33 265 230 300 132 262 210 345 132M 17 224 560 610 160M 210 25 670 730 254 10 42 12 37 160 314 255 420 15 160L 254 302 700 760 300 250 350 14.5 10M 241 311 740 00 279 121 4 110 14 42.5 9 10 349 20 455 10L 279 349 790 50 1 200L 31 305 133 350 300 400 200 3 305 369 505 790 50 55 16 49 10 225M(2P) 311 393 30 90 1.5 225S(4P) 356 26 149 400 350 450 225 431 335 36 560 25 5 20 19 5 225M(4~P) 311 60 1 53 11 0 393 55 915 250S/M(2P) 406 311/349 16 140 250 44 370 445 615 915 975 250S/M(4~P) 70 20 62.5 12 20S(2P) 36 49 95 1055 65 1 5 11 500 450 550 24 20M(2P) 419 540 1035 1105 457 190 20 542 410 60 20S(4~P) 36 49 1015 105 0 170 22 71 14 20M(4~P) 419 540 1065 1135 315S(2P) 406 570 1200 1270 140 315M(2P) 457 65/70* /140* 1/20* 5/62.5* 11/12* 1310 130 60 22 315L(2P) 50 1310 130 50 216 600 550 660 315 62 530 45 315S(4~10P) 406 570 1230 1300 170 315M(4~10P) 457 5/90* /170* 22/25* 76/1* 14/14* 1340 1410 24 6 2 60 315L(4~10P) 50 1340 1410 355M/L(2P) 90 170 25 1 14 1550 1630 560/630 750 355M/L(4~P) 100 210 2 90 16 1590 1670 610 254 740 60 00 355 726 655 1010 355A/B(2P) 90 170 25 1 14 1750 130 710/00 950 355A/B(4~P) 100 210 2 90 16 1790 170 *The dimension behind / is for 15 and larger
Notes for ordering When ordering, Please record the type, pole, rated power, rated voltage, rated frequency, mounting model, insulation class, IP and so on. If you have special demands, please confer with us on your demands. The data in this stylebook are allowed variety. Contact information Address: No. 3, Erwei Road, Dongli Developing District, Tianjin, China Tel: 022-2492761 022-2492762 Fax:022-24993760 Website:www.tjshenchuan.com E-mail:tjstzdjyjs@263.net