EUTECH INSTRUMENTS αlpha-ph800 ph/orp / 68X216813 03/99 0
αlpha-ph800 ph/orp / αlpha-ph800 ph/orp / αlpha-ph800 ph/orp / EUTECH EUTECH 1999 1.0 Eutech Instruments Pte Ltd. Blk 55, Ayer Rajah Crescent #04-14/24, Singapore 139 949. Tel: (65) 778 6876; Fax: (65) 773 0836; e-mail: marketing@eutechinst.com; Home page: http://www.eutechinst.com 1
1...3 1.1...3 1.2...3 2...3 2.1...3 2.2...4 3...5 3.1...5 3.2...7 4...9 4.1...9 4.2...9 4.3...10 5...10 5.1...10 6...10 6.1 ph...10 6.2 ORP mv...12 7...12 7.1 (OFS)...12 7.2 (Set o C)...13 7.3 A/ B (SP1/SP2)...14 7.4 (ConF)...17 7.5 (CAL)...18 8...19 9...20 10...20 10.1...20 10.2...20 10.3...20 10.4...20 11...21 11.1 1...21 11.2 2...22 11.3 3...22 2
1 1.1 Eutech s ¼ DIN alpha-800 ph/orp ph ORP ph ORP (ATC) ATC 0~ 2000 / ph/orp (4/20mA) LED 1.2 ph ORP 2 2.1 : ph/orp ph/orp Pt 100/1000 3
Flow Assembly phcontroller ChartRecord er Process Assembly with Electrode 2.2 Measurement Cable Power Mains (220/110 VAC) Flat Gasket (1mm) (To be Inserted By Customer) Note: The Taped Corners Have to Be On Top 92 + 0.5 92 + 0.5 92 56 32 96 Mounting Cut-Out max. 45 max. 175 96 x 96 mm IP 54 ( ) 4
3 3.1 ph V S / S/ 1 8 19 2 0 2 1 2 2 BNC PE/S Pt 1 0 0 P o t e n t i a l Matching Pin (PMP) Signal Input ph/orp P o w e r M a i n s R e l a y A Relay B Hold Inp u t S i g n a l Output p H - ma + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 5 16 17 A C : L N P E P E / S 5
Temp. ph PE N L S 0/PA 3 2 1 22 21 20 19 18 S BNC Measuring Cable Potential Matching Pin (PM) ph Combination Electrode Temp. ph PE N L S 0/PA 3 2 1 22 21 20 19 18 BNC Measuring Cable Potential Matching Pin (PM) ph Combination Electrode 6
3.2. 17 PCB 5 17 ( ): 1. 10. 2. 11. 3. 12. 4. (NC) 13. 1 5. 14. 2 6. (NO) 15. 7. (NC) 16.4-20 ma 8. 17.4-20 ma 9. (NO) 5 : 18. Pt100/Pt1000 1 19. Pt100/Pt1000 20. Pt100/Pt1000 2 : RTD, 18 19. Pt100/Pt1000 Pt100 1 RTD 21. ph/orp ( ) 22. ph/orp ( ) 7
Pt100/ 0V/ Pt1000 PAL S/ FUSE 250VAC 100mA (F) L N PE RELAY A RELAY B NC NC NC NC - + 8
4 4.1 4.1.1 4.1.2 LCD READY MEAS CAL 7.00 CON ph 25.0 o C ATC MEAS: : CAL: ph/orp READY: : ATC: ATC. ATC ATC A/B LED ATC 4.2 1) (OFS) 2) / (Set o C) 3) 1 (SP1) 9
4) 2 (SP2) 5) (ConF) 6) (CAL ph) 4.3 5 5.1 LCD ph ORP ph ORP OrP ph mv MEAS CAL READY ERR 5.1.1 1) ENTER CAL 0 mv ph 2) 6 CAL 6.1 ph (1.00, 4.00, 6.86 or 7.00, 9.00, 9.18 and 10.00) 10
1) CAL CAL ph ENTER CAL : CAL OrP 7.4 ORP ph 2) ENTER CAL ph ph 7.00 ( 6.86). ATC 7.00 ph 3) ENTER ph 7 ( ph 6.86) CAL CAL READY CAL PH CAL 57.2 mv 6.88 ph CAL 6.96 ph ph 4) ph 4.02 ph 4.00 ph CAL ENTER CAL ph 5) 6) ENTER CAL : ERR 59.0 mv 7.00 ph : ( 7.2.3). READY 11
6.2 ORP mv 1). CAL ENTER CAL OrP : CAL PH 7.4 ph ORP mv CAL OrP 2) ORP 3) ENTER CAL mv 4) mv 5) ENTER CAL 226 mv C 7 7.1 (OFS) ph ±120mV ph Ofs -0.05 7.00 1), ph 2) ph ph ph 3) ENTER 4) 5) ENTER ph 6) ph 2 ph ph 7) ENTER 12
: 6 ORP 7.2 (Set o C) 7.2.1 1) ENTER 2) Set o C 3) ENTER Atc ATC on off SEt o C on Atc 4) 5) ENTER off Atc 7.2.2 ( ATC ) 1) 7.2.1 ATC on 2) ENTER. 3) 4) ± 5 o C 5) ENTER 6) 0.0 on Atc 25.0 ATC o C 13
7.2.3 : off Atc 25.0 P.C 25.0 C.C 25 o C 25 o C 1) 7.2.1 ATC off 2) ENTER. P. o C 3) 9.9 125 o C 4) ENTER C. o C 5) 9.9 and 125 o C 6) ENTER 7) 7.3 A/ B (SP1/SP2) SP1 Relay A SP2 Relay B 14
7.3.1 1 ( 2) SP1 1). ENTER 2) SP1 (SP2). 4.00 ph SP1 Lo SP1 7.3.2 1) 7.3.1 2 2) ENTER SP1 (SP2) 3) 1 ( 2) 4) ENTER 5) 7.3.3 3 7.3.3 ph/orp lo ph/orp Hi SP1 SP2 lo/lo, lo/hi, hi/lo, hi/hi 1) 7.3.1 2) ENTER Lo Hi SP1 (SP2) 3) SP1 (SP2) (lo) (hi) 4) ENTER 5) 7.3.4 3 7.3.4 0.1 1.0 ph 10 100mV 15
ph 9.0 ph 0.5 ph 9.0 ph ph 8.5 ph 1) 7.3.1 2) ENTER HYS 3) 1 2 4) ENTER 5) 7.3.5 3 : 3 0.50 ph HYS 7.3.5 0 2000 0 On.d 1) 7.3.1 2) ENTER. on delay On.d 3) 1 2 0 2000 4) ENTER 5) 7.3.6 3 7.3.6 0 2000 16
0 OF.d 1) 7.3.1 2) ENTER. OF.d 3) 1 2 0 2000 4) ENTER 5) 7.4 (ConF) ph ORP 7.4.1 1) ENTER 2) ConF ConF PH SY OrP mv SY PH ASY OrP mv ASY 17
7.4.2 ph ORP mv ph ORP (mv) 3 1) 7.4.1 2) ENTER (ph ORP mv ) (SY) (ASY) 3) 7.4.3 7.4.3 NO YES ENTER : Yes, 1) 7.4.1 2) ENTER no YES def ( default). 3) no yes YES ENTER 4) ENTER no def 7.5 (CAL) 7.5.1 1) ENTER 2) CAL 3) 6. 18
8 ph -2.00 to 16.00 ph 0.01 ph ± 0.01 ph mv - 1000 to +1000 mv 1 mv ± 1 mv - 9.9 to + 125.0 o C 0.1 o C ± 0.5 o C Pt 100 /Pt 1000 ( ) / ( 25.0 o C) ( ) / 0 2000. ph 0.1 1 ph ORP 10 100 mv 2 - - 250 VAC. 3A. 600 VA 110 / 220 VAC ( ) 48 62 Hz 4 20 ma,. 500 Ω ph / ORP BNC 5 /17 / 250 V / 100 ma EMC EN 50081-1 EN 50082-1 0 50 o C 10 to 95%, ( - L x H x W) 175 x 96 x 96 mm ( ). 0.7 kg ABS ( ) / ) IP 54 / IP 40 19
9 ph ATC, EC-ARTSO05B ph ATC EC-ARHTTSO05B ph ATCEC-ARGTSO05B ph ATC(Pt 100), EC-100GTSO05B ORP ORP EC-HTAUTSO05B EC-HTPTTSO05B ph/orp 6 bar (ECARHTTSO05B 9 bar ) 5 10 10.1, Eutech 10.2 : 17-5- ( ) [1 ] [2 ] [1 ] [1 ] 10.3 Eutech RGA( ) Eutech : / 10.4 20
11 11.1 1 JP 1 220 VAC. JP 2 110 VAC. JP 3 Pt100 Pt1000 Fuse ( 100mA), 21
11.2 2 ph ph 1.68 ph 4.01 ph 6.86 ph 7.00 ph 9.18 ph 10.01 ( o C) ( ) ( ) ( ( ) ( ) ( ) ) 0 1.67 4.01 6.98 7.12 9.47 10.32 5 1.67 4.01 6.95 7.09 9.38 10.25 10 1.67 4.00 6.92 7.06 9.32 10.18 15 1.67 4.00 6.90 7.04 9.27 10.12 20 1.68 4.00 6.88 7.02 9.22 10.06 25 1.68 4.01 6.86 7.00 9.18 10.01 30 1.69 4.01 6.85 6.99 9.14 9.97 35 1.69 4.02 6.84 6.98 9.10 9.93 40 1.70 4.03 6.84 6.97 9.07 9.89 45 1.70 4.04 6.83 6.97 9.04 9.86 50 1.71 4.06 6.83 6.97 9.01 9.83 55 1.72 4.08 6.83 6.97 8.99 9.81 60 1.73 4.10 6.84 6.98 8.96 9.79 70 1.74 4.12 6.85 6.99 8.92 9.76 80 1.77 4.16 6.86 7.00 8.89 9.74 90 1.80 4.20 6.88 7.02 8.85 9.73 11.3 3 SP1 Set to LO SP2 Set to HI RELAY ON RELAY OFF 4.0 4.5 7.0 9.5 10.0 SP1 SP2 FORWARD DIRECTION REVERSE DIRECTION HYSTERESIS BAND (DEFAULT = 0.5 ph) 22
23