SITRANS F flowmeters Siemens AG 2007 Overview Technical specifications The SONO 3100 sensor and the FUS060 transmitter is an ideal combination for applications where process shut down is impossible during service and where there is a need for extreme high/low temperatures and pressures. Transducers can easily be changed without interrupting operation. SONO 3100 can be delivered as a option in -track solution for absolute best performance and accuracy. Benefits Replaceable transducers under pressure Measure on all liquids less than 350 Cst, conductive or non conductive No pressure drop Reliable and accurate flow measurements Long time stability On request: - Special sensor material, e.g. Duplex - High/low temperature sensor version: +250 C (+82 F) / -200 C (-328 F) sensors - Pressure rating 30 bar (6235 psi) - track sensor technology Application The main application for SONO 3100 in combination with FUS060 ultrasonic flowmeter is to measure volume within: Petrochemical industry Power engineering Water and waste water Oil and liquid gases SITRANS FUS060 holds ATEX for hazardous areas, HART and PROFIBUS PA. SONO 3100 holds ATEX Ex approval. Design The SONO 3100 in combination with FUS060 consists of a SONO 3100 sensor, transducers with O-rings or flanges depending on selection - and a FUS060 transmitter. SONO 3100 is basically supplied in a 2-track solution with and without flanges in sizes from DN 100 to DN 1200. track version is avaible on request. SONO 3100 is as standard available in carbon/stainless steel from DN 100 to DN 1200. FUS060 is designed for wall mounting only. 2-track sensor fitted with four SONO 3200 transducers Error in measurement Error in measurement at reference conditions; % of measured value Max flow velocity v > 0.5... 10 m/s, < ± 0.5% of rate (v=flow velocity) 10 m/s (32 ft) Nominal size DN 100... 1200 (... 8 ) Liquid temperature Standard: -10 C... +200 C (1...392 F) ATEX: -20... +190 ºC (-... +37 ºF) Ambient temperature Standard: -20 C... +200 C (-... +392 F) ATEX: -20... +180 ºC (-... +356 ºF) Enclosure IP68 (NEMA 6)/IP68 (NEMA 6X) Process connections PN designated, EN 1092-1-type II, B Pipe material carbon steel DN 200... 1200 (8... 8 ) PN 10 DN 100 1200 ( 8 ) PN 16 DN 200 1000 (8 0 ) PN 25 DN 100 500 ( 20 ) PN 0 Pipe material stainless steel DN 200 300 (8 12 ) PN 10 and PN 25 DN 100 300 ( 12 ) PN 16 and PN 0 Class designated, EN 1759-1-type II, B Pipe material carbon steel DN 100 600 ( 2 ) Class 150 DN 100 300 ( 12 ) Class 300 Pipe material stainless steel DN 100 300 ( 12 ) Class 150 and Class 300 Without flanges, only in carbon steel Transducer SONO 3200 Materials Pipe Flange PN Class Transducer body Transducer terminal house Certificates and approvals System ATEX approval for SONO 3100 together with transmitter FUS060 Material certificates NDT examination report DN 100 1200 ( 8 ) PN 16 DN 200 1000 (8 0 ) PN 25 DN 100 500 ( 20 ) PN 0 O-ring or flange versions Steel EN 1.035-P235GH or stainless steel EN 1.0 - AISI 316L EN 10025-S235JRG2, 1E1 or stainless steel EN 10222-5- 1.0, 13E0 ASTM A105,1,1 or stainless steel ASTM F316L,2,3 Stainless steel AISI 316 or similar Stainless steel AISI 316 or plastic PA 6.6 ATEX II 2G Ex dem [ia/ib] IIC T6/T/T3 The sensor is supplied as standard with a Siemens Certificate of Conformity. Material certificate on in-line parts on request. Available on request The sensor SONO 3100 with transmitter FUS060 conforms to Product Family Standard EN 61326/A3 appendix A (Title: Electrical Equipment for Measurement control and laboratory use EMC requirements). /182 Siemens FI 01 2008
Siemens AG 2007 SITRANS F flowmeters Selection and Ordering data Order-No. Order code SONO 3100 sensor 2-track F) 7ME3100-77777 - 7777 777 Diameter Qn [m 3 /h] DN 100 (") 28 1 N DN 100 (") 100 1 P DN 100 (") 220 1 R DN 125 (5") 1 S DN 125 (5") 150 1 T DN 125 (5") 350 1 V DN 150 (6") 6 2 A DN 150 (6") 220 2 B DN 150 (6") 500 2 D DN 200 (8") 110 2 E DN 200 (8") 380 2 F DN 200 (8") 900 2 H DN 250 (10") 180 2 J DN 250 (10") 600 2 K DN 250 (10") 1300 2 M DN 300 (12") 250 2 N DN 300 (12") 850 2 P DN 300 (12") 2000 2 R DN 350 (1") 350 2 S DN 350 (1") 1000 2 T DN 350 (1") 2800 2 V DN 00 (16") 50 3 A DN 00 (16") 1300 3 B DN 00 (16") 3600 3 D DN 500 (20") 1300 3 J DN 500 (20") 2200 3 K DN 500 (20") 200 3 M DN 600 (2") 1300 3 S DN 600 (2") 3200 3 T DN 600 (2") 200 3 V DN 700 (28") 2000 E DN 700 (28") 200 F DN 800 (32") 200 N DN 800 (32") 5500 P DN 900 (36") 200 5 A DN 900 (36") 7500 5 B DN 1000 (0") 200 5 J DN 1000 (0") 9000 5 K DN 1200 (8") 200 5 S DN 1200 (8") 13200 5 T Flange norm and pressure rating (All sizes are not available in all pressure ratings) System without sensor - only transmitter A FUS060 as spare part - settings as defined with this order-no. EN 1092-1 PN 10 B PN 16 C PN 25 D PN 0 E ANSI B16.5 class 150 H class 300 J pipe without flanges PN 10 P PN 16 Q PN 25 R PN 0 S Selection and Ordering data Order-No. Order code SONO 3100 sensor 2-track F) 7ME3100-77777 - 7777 777 Pipe and flange material Carbon steel (DN 100... 1200) 1 Stainless steel (DN 100... 300) 2 Transducer type and approval IP67 (NEMA X/6) PA housing, PN 0, 1 O-ring, 50 mm, 100 C (212 F) IP68 SS housing, PN 0, O-ring, 50 mm, 2 200 C (392 F) IP68 SS housing, PN 0, O-ring, 50 mm, 3 190 C (37 F), EEx d IIC T3, M20 gland, ATEX approval IP67 (NEMA X/6) PA housing, PN 0, flange, 88 mm, 100 C (212 F) IP68 SS housing, PN 0, flange, 88 mm, 5 200 C (392 F) IP68 SS housing, PN 0, flange, 88 mm, 6 190 C (37 F), EEx d IIC T3, M20 gland, ATEX approval IP68 SS housing, PN 0, O-ring, 50 mm, 7 190 C (37 F), EEx i IIC T3, M20 gland, ATEX approval IP68 SS housing, PN 0, flange, 88 mm, 8 190 C (37 F), EEx i IIC T3, M20 gland, ATEX approval Cable gland entires Cable glands M20 in transducers and in 1 transmitter M25/20/16 x 1.5 Cable glands ½ NPT in transducers and in 2 transmitter Transmitter SITRANS FUS060 Without transmitter (only sensor) A IP65 (NEMA ), 120/230 V AC N IP65 (NEMA ), 2 V AC/DC P IP65 (NEMA ), 2 V AC/DC ATEX Ex-d Q Module Without transmitter (only sensor) A HART, 1 pulse output, 1 relay B HART EEx [ia], 1 pulse output, 1 relay C PROFIBUS PA,1 pulse/frequency D PROFIBUS PA, EEx [ia], 1 pulse/frequency E Transducer coax cable x 3 m, max. 70 C (158 F) 0 x 15 m, max. 70 C (158 F) 1 x 30 m, high temp. max. 200 C (392 F) 2 x 30 m, max. 70 C (158 F) 3 x 60 m, max. 70 C (158 F) x 90 m, max. 70 C (158 F) 5 x 120 m, max. 70 C (158 F) 6 x 5 m, high temp. max. 200 C (392 F) 7 x 15 m, high temp. max. 200 C (392 F) 8 Please also see www.siemens.com/sitransfordering for practical examples of ordering F) Subject to export regulations AL: 9I999, ECCN: N. Siemens FI 01 2008 /183
SITRANS F flowmeters Siemens AG 2007 Selection and Ordering data Additional information Please add -Z to Order No. and specify Order code(s) and plain text. Calibration Production calibration DN 100... DN 1200 Theoritical calibration DN 500... DN 1200 Match pair calibration 2 x 3 points Max. flow 250... 1300 m 3 /h depending on dimension (DN 100... DN 500) Match pair calibration 2 x 3 points Max. flow 100... 200 m 3 /h depending on dimension (DN 300... DN 700) Match pair calibration 2 x 3 points Max. flow 200 m 3 /h depending on dimension (DN 800... DN 1200) Accredited Siemens ISO/IEC 17025 calibration Max. flow 250... 1300 m 3 /h depending on dimension (DN 100... DN 500) Accredited Siemens ISO/IEC 17025 calibration Max. flow 100... 200 m 3 /h depending on dimension (DN 300... DN 700) Accredited Siemens ISO/IEC 17025 calibration Max. flow 200 m 3 /h depending on dimension (DN 800... DN 1200) Accredited - Third party ISO/IEC 17025 calibration Max. flow 250... 1300 m 3 /h depending on dimension (DN 100... DN 500) Accredited - Third party ISO/IEC 17025 calibration Max. flow 100... 200 m 3 /h depending on dimension (DN 300... DN 700) Accredited - Third party ISO/IEC 17025 calibration Max. flow 300... 7000 m 3 /h depending on dimension (DN 800... DN 1200) EN 1020-3.1 EN 1020-3.1 and 100% NDT on weldings, DN 100... DN 00 EN 1020-3.1 and 100% NDT on weldings, DN 500... DN 700 EN 1020-3.1 and 100% NDT on weldings, DN 800... DN 1200 Pressure certificate EN 1020-2.3 Tag name plate Stainless steel tag with 12 mm characters, max. 15 characters (add plain text) Self-adhesive plastic tag with 8 mm characters, max. 15 characters (add plain text) Please also see www.siemens.com/sitransfordering for practical examples of ordering Order code Included D03 D06 D07 D08 D21 D22 D23 D31 D32 D33 F10 F11 F12 F13 F21 Y17 Y18 F) Subject to export regulations AL: 9I999, ECCN: N. /18 Siemens FI 01 2008
Siemens AG 2007 SITRANS F flowmeters Sensor SONO 3100 accessories and spare parts Type Pressure rating Material Temperature range [ C ( F)] Order No F) Symbol Terminal housing (M20 cable gland) Terminal housing (M20 cable gland) Terminal housing (½ NPT cable gland) Terminal housing (½ NPT cable gland) N/A PA 6.6-20... +100 (-... +212) FDK-085B5501 N/A ASTM 316-20... +200 (-... +392) FDK-085B550 N/A PA 6.6-20... +100 (-... +212) A5E0083960 N/A ASTM 316-20... +200 (-... +392) A5E0083927 Ex d terminal housing N/A ASTM 316-20... +200 (-... +392) FDK-085B5505 (M20 cable gland) Ex i terminal housing N/A ASTM 316-20... +200 (-... +392) A5E00835255 (M20 cable gland) Gaskets for O-Ring transducer PN 0 70 FFKM -20... +200 (-... +392) FDK-085B1098 Gasket and 12 mm bolts and nuts for flange transducer PN 0 Graphite 316 SS -20... +200 (-... +392) FDK-085B1083 Type/description Order No. F) Symbol Submersible kit for transducers SONO 3200, IP68 10 m (32.81 ft) w.g. rating FDK-085L203 Type/description Transducer length Order No. F) Symbol Extraction tool for replacement of SONO 3200 O-ring transducers under pressure (hot-tap) 50 mm (1.97 ) transducers FDK-085B5331 Type/description Length m (ft) Order No. F) Symbol Coaxial cable for FUS060, (75 Ω, max. 70 ºC (158 ºF), black PVC) (2 pcs.) High temp. coaxial cable for FUS060; with 0.3 m brown PTFE high temp. transducer part, max. 200 C (392 F) and black PVC for remaining transmitter part with SMB plug, max. 70 ºC (158 ºF) ; (impedance 75 Ω) (2 pcs.) 3 (9.8) A5E00875101 15 (9.21) A5E0086132 30 (98.3) A5E0111226 60 (196.85) A5E0111230 90 (295.28) A5E0111231 120 (393.70) A5E0111232 3 (9.8) A5E0086138 15 (9.21) A5E0086135 30 (98.3) A5E0119632 Cable connection boxes Type/description Order No. F) Symbol Junction box for coax cable IP68 metal box for coax cables IP68 EEx-e plastic box for coax cables, no ATEX apptoval FDK-085B1361 FDK-085B1363 F) All products on this page subject to export regulations AL: 9I999, ECCN: N. Siemens FI 01 2008 /185
SITRANS F flowmeters Siemens AG 2007 Cable glands Type/description Temperature range [ C ( F)] Approval Order No. F) Symbol M20 Plastic -0... +100 (-0... +212) FDK-085B1317 M20 Chrome plated brass -20... +100 (-... +212) FDK-085B139 ½" NPT plastic -0... +100 (-0... +212) on request M20 Stainless steel -20... +200 (-... +392) FDK-085B1399 M20 Stainless steel -20... +195 (-... +383) Ex d FDK-085B1315 Transducer SONO 3200 gasket Type Pressure rating Material Temperature range [ C ( F)] Order No. F) Gasket O-ring (3 pcs. for complete PN 0 FFKM 1) /FKM -20 +200 (-... +392) FDK-085B1089 transducer) Gasket flange PN 0/160 Graphite -20 +200 (-... +392) FDK-085B1080 Gasket and 12 mm (0.7 ) bolts and PN 0 Graphite, 316 SS -20 +200 (-... +392) FDK-085B1083 nuts for flange transducers Gasket and 16 mm (0.63 ) bolts and nuts for flange transducers PN 160 Graphite, 316 SS -20 +200 (-... +392) FDK-085B108 Gasket cryogenics PN 0 Copper, O-ring -200 +100 (-328... +212) FDK-085B1099 1) Chemical resistant O-ring Symbol F) All products on this page subject to export regulations AL: 9I999, ECCN: N. /186 Siemens FI 01 2008
Siemens AG 2007 SITRANS F flowmeters Dimensional drawings to sensor SONO 3100 Sensor SONO 3100 with EN norm 1) Length tolerance (mm): DN100 +2/-3, DN 125... 200 +3/-, DN 250... 00 +/-5, DN 500...1200 +5/-6 2) Wall thickness for pressure rates PN 6... 0 3) For all sensors with flange transducers track angle are 60º A**) Space required for replacement of transducer min. 230 mm (9.1 inch). For replacement with special tool (extraction tool) see more information in Sensor SONO 3100 accessories and spare parts on page /185. Weight of system incl. process flanges and transducers PN 10 PN 16 PN 25 PN 0 DN D U L 1) B θ H W 10 2) D 10 L 10 1) W 16 2 D 16 L 16 1) W 25 2) D 25 L 25 1) W 0 2) D 0 L 0 1) [mm] [mm] [mm] [ ] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] 100 11.3 860 305 5 3) 2.8 - - - 3.6 220 960 3.6 235 990 3.6 235 990 125 139.7 862 325 5 3) 6.5 - - -.0 250 970.0 270 990.0 270 990 150 168.3 862 350 5 3) 78.1 - - -.5 285 970.5 300 1010.5 300 1010 200 219.1 668 30 5 3) 102.1 6.3 30 790 6.3 30 790 6.3 360 820 6.3 375 80 250 273.0 71 80 5 3) 127.6 6.3 395 850 6.3 05 850 7.1 25 890 7.1 50 920 300 323.9 607 525 5 3) 151.8 7.1 5 70 7.1 60 760 8.0 85 790 8.0 515 830 350 355.6 639 550 5 3) 166. 8.0 05 770 8.0 520 800 8.0 555 80 8.8 580 880 00 06. 703 600 5 3) 191.3 8.0 565 850 8.0 580 875 8.8 620 925 11.1 660 975 500 508.0 797 690 5 3) 21.1 7.1 670 950 8.0 715 980 10.0 730 1050 1.2 755 1080 600 610.0 912 705 60 29.8 7.1 780 1075 8.8 80 1105 11.0 85 1165 - - - 700 711.0 937 895 60 30.6 8.0 895 1100 8.8 910 110 12.5 960 1190 - - - 800 813.0 967 985 60 390. 8.0 1015 1150 10.0 1025 1180 1.2 1085 120 - - - 900 91.0 1007 1070 60 5.9 10.0 1115 1200 10.0 1125 1230 16.0 1185 1300 - - - 1000 1016.0 1060 1160 60 90.0 10.0 1230 1250 10.0 1255 1300 17.5 1320 1370 - - - 1200 1220.0 1100 1350 60 588.0 8.0 130 1280 11.0 155 1330 12.5 185 1360 - - - SONO 3100, 2-track Nominal diam. Flange type - Weight [kg] ([lbs]) DN PN 10 PN 16 PN 25 PN 0 100 ( ) - 32 (70.5) - 35 (77.2) 125 (5 ) - 38 (83.8) - (97.0) 150 (6 ) - 5 (99.2) - 52 (11.6) 200 (8 ) 59 (130.0) 58 (127.9) 70 (15.3) 79 (17.2) 250 (10 ) 73 (161.0) 75 (163.3) 96 (211.6) 117 (257.9) 300 (12 ) 83 (183.0) 92 (202.8) 11 (251.3) 151 (332.9) 350 (1 ) 98 (216.0) 113 (29.1) 15 (332.9) 191 (21.1) 00 (16 ) 119 (262.) 11 (310.9) 191 (21.1) 275 (606.3) 500 (20 ) 153 (337.3) 207 (56.) 28 (626.0) 379 (836.0) 600 (2 ) 193 (25.5) 276 (608.5) 363 (800.3) - 700 (28 ) 262 (577.6) 303 (668.0) 80 (1058) - 800 (32 ) 329 (725.3) 00 (881.8) 650 (133) - 900 (36 ) 28 (93.6) 75 (107) 835 (181) - 1000 (0 ) 500 (1102) 59 (1010) 1078 (2377) - 1200 (8 ) 70 (1036) 732 (1613) 902 (1988) - Siemens FI 01 2008 /187
SITRANS F flowmeters Siemens AG 2007 Sensor SONO 3100 with ANSI norm Class 150 Class 300 DN D U L 1) B θ H W 2) 150 D 150 L 1) 150 W 2) 300 D 300 L 1) 300 [inch] [inch] [inch] [ ] [inch] [inch] [inch] [inch] [inch] [inch] [inch] ".50 33.86 12.01 5 3) 1.69 0.1 9.00 39.86 0.25 10.00 0.62 5" 5.50 33.9 12.80 5 3) 2.5 0.15 10.00 0.9 0.27 11.00 1.70 6" 6.63 33.9 13.78 5 3) 3.07 0.16 11.00 0.9 0.30 12.50 1.70 8" 8.63 26.30 16.93 5 3).02 0.16 13.50 3.30 0.29 15.00 35.06 10" 10.75 28.11 18.90 5 3) 5.02 0.18 16.00 36.11 0.3 17.50 37.35 12" 12.75 23.90 20.67 5 3) 5.98 0.20 19.00 32.90 0.39 20.50 3.1 1" 1.00 25.16 21.65 5 3) 6.55 0.21 21.00 35.16 - - - 16" 16.00 27.68 23.62 5 3) 7.53 0.22 23.50 33.7 - - - 20" 20.00 31.38 27.17 5 3) 9.9 0.26 27.50 2.76 - - - 2" 2.00 35.91 27.76 60 11.61 0.30 32.00 7.91 - - - 1) Length tolerance (mm): " +0.08"/-0.12"(+2/-3mm), 5" to 8" +0.12"/-0.16"(+3/-mm), 10" to 16" +0.16"/-0.20"(+/-5mm), 20" to 2" +0.20"/-0.2"(+5/-6mm) 2) Minimum wall thickness for pressure rates CL150 or CL300. 3) For all sensors with flange transducers track angle are 60º Approximate weights for SONO 3100 senor with ANSI B16.5 flanges Nominal diam. Nominal diam. Weight [kg] ([lbs]) 1) DN DN CL150 CL300 [inch] [mm] [kg] [lbs] [kg] [lbs] 100 ( ) 32 70.5 35 77.2 5 125 38 83.8 97.0 6 150 5 99.2 52 11.6 8 200 58 127.9 79 17.2 10 250 75 165.3 117 257.9 12 300 92 202.8 151 332.9 1 350 113 29.1 - - 16 00 11 310.9 - - 20 500 207 56. - - 2 600 276 608.5 - - 1) Weight of system incl. process flanges and standard O-ring transducers. For sensors with flange transducer please add approx. 10 kg (22.05 lbs). For SS terminal housings instead of the standard PA housing add approx. 5 kg (11.03 lbs). /188 Siemens FI 01 2008
DELLSONICS 北京迪妙声科技有限公司 BEJING DELLSONICS SCIENCE & TECHNOLOGY LTD. 公司简介 北京迪妙声科技有限公司 ( 原名北京妙声力科技有限公司 ), 位于北京市海淀区中关村南大街, 是与西门子公司德国总部正式签约的西门子过程仪表及分析仪器核心合作伙伴, 也是西门子北方区域规模最大 实力最强的优秀代理商 公司主营 : 一 西门子 - 妙声力 (Milltronics) 系列物位产品 : 超声波物位计 超声波液位差计 超声波泥水界面计 超声波明渠流量计 雷达物位计 射频导纳物位计 射频导纳油水界面计 ; 射频导纳物位开关 音叉式物位开关 阻旋式物位开关 ; 皮带称 固体质量流量计 冲板流量计等 二 西门子过程仪表产品 : 电磁流量计 质量流量计 超声波流量计 温度变送器 压力变送器 阀门定位器 气体分析仪等 三 德国 UWT 公司的阻旋式料位开关 音叉式料位开关 重锤式料位计等产品 四 自行研发生产超声波液位计 温度变送器 压力变送器 数显表及油田专用仪器等产品 成立于 195 年的西门子 - 妙声力公司 (Milltronics) 是世界公认的超声波物位测量领域的领导者, 全球最大的超声波物位仪表生产厂家, 在超声波 雷达 电容技术领域拥有超过 60 项专利, 超声波产品的综合性能指标经美国 控制 杂志评比, 其综合性能名列全球第一! 作为西门子公司长期稳定的代理商, 我公司有着 10 余年产品的销售和服务经验, 无论从专业技术水平 现货及备件库存量 售后服务质量 仪表维护以及故障产品国内维修能力等方面, 都具备显著的优势 尤其是我公司一流的技术支持和高效率高品质的服务体系, 在业界具有很高的知名度 如果您需要相关的产品, 需要咨询技术问题, 需要值得信赖的合作伙伴, 敬请来电垂询! 商务部总机电话 :010-88579530/31/32/33,88579597,8857181,81968099( 小灵通 ) 传真 : 总机转 50 谢谢您的合作与支持! 地址 : 北京海淀区魏公村街 1 号韦伯豪家园 3-3-702 (100081) http://www.dellsonics.com 电话 :010-88579530/31/32/33,88579597,8857181 传真 : 总机转 50 E-mail:sales@dellsonics.com