User s Manual / 使用手冊 Model : TIP-PU301 www.mukii.com.tw Copyright 2010 MUKii Technology INC. All Rights Reserved. All Registered Trademarks Belong To Their Respective Companies
TABLE OF CONTENTS PACKAGE INCLUDES...1 SPECIFICATIONS...1 INSTALLATION...2 DRIVER INSTALLATION...4 WARRANTY...7 目錄 包裝內附...8 產品規格...8 硬體安裝...9 軟體安裝...11 保固說明事項...14
PACKAGE INCLUDES TransImp 2-Port PCI-E Host Card x 1 Low Profile Bracket x 1 User s Manual x 1 CD-Rom Driver x 1 SPECIFICATIONS Model : TIP-PU301 USB Port : 2 x USB 3.0 Type A (Backward Compatible With USB 2.0 & 1.1) Transfer Rate : Ultra-Fast Transfer Rates-up to 5 Gbps/USB 3.0 Transfer Rates-up to 480 Mbps /USB 2.0 Power Source : 4 Pin Power Connector Output : +5V / 900mA (each port) Dimensions : 120 x 81 x 19mm System Support : Microsoft Windows XP / Vista(32/64bit) / 7(32/64bit) USB 3.0 Port 1 USB 3.0 Port 2 1
INSTALLATION 1. Turn off your computer and disconnect all external peripheral devices and cables, i.e. power cord, network cable, monitor, etc. 2. Remove your computer s cover. For most standard PC s, there are screws that will need to be unseated before you can remove the computer s cover, and these screws are usually located at the rear of the computer, along the edge of the cover. However, placement of these screws and cover attachment may vary by manufacturer, so please refer to your computer system s manual for specific details. 3. Once you have removed the cover, you will need to locate the PCIe slots on the motherboard. The PCIe slots are generally located in the back of the computer, with the slots built into the side-wall of the computer ( please refer to your computer system s manual for the exact location of your PCIe slots or refer to the diagram in this page. If necessary, you may need to remove the expansion slot cover, and you may also need to remove any add-in boards which may block the access to the PCIe slots. (2-Port PCI-e SuperSpeed USB 3.0 Host Card will fit and work with any PCI Express slot whether it be a x1, x4, x8, x16 slot. Performance may vary with each slot.) 2
INSTALLATION 4. Take the TransImp 2 Ports USB 3.0 PCI-E Host Card out of its anti-static bag and push the card into the empty PCIe card slot. The card should be mounted with the circuitry facing down. This is the only way to mount the card, so if you are having problems inserting the card into the PCIe slot, make sure that it is oriented correctly. Be sure that the gold contact pins of the PCIe card are seated completely inside your computer s PCIe slot. Be aware that it may take some force to get the card fully seated in the slot. 5. Once the PCI card is seated correctly, tighten with a screw. 6. Connect 4-pin power to the power connector 7. Now you are ready to put the computer s cover back on and reconnect all of your external peripheral devices and cables. 3
SOFTWARE INSTALLATION 1. Insert the driver CD-ROM, and run installation Setup.exe (Pic-1) in Driver folder to start the installation. (Pic-1) 2. Select Next (Pic-2) and click (I accept the terms of the licence agreement). Then click Next (Pic-3) (Pic-2) (Pic-3) 3. Click INSTALL (Pic-4) (Pic-4) 4
DRIVER INSTALLATION 4. When installation of the driver (Pic-5) is complete, click Finish to end the installation. (Pic-6) (Pic-5) (Pic-6) 5
WARRANTY MUKii TransImp series offers twelve(12) months limited warranty for all defects in material and workmanship under normal use. (Any product on which the serial number has been defaced modified or removed is not coverd.) MUKii Technology INC. 2F, No.588, Tanmei St, Neihu District, Taipei City 114, Taiwan(R.O.C) Tel : 886.2.87927289 Fax : 886.2.87920373 6
包裝內附 勁速 - 雙埠超高速 USB 3.0 PCIe 介面卡 x 1 Low-Profile 專用短檔版 x 1 使用說明書 x 1 驅動程式光碟 x 1 產品規格 產品型號 :TIP-PU301 連接埠 :2 個外接 USB 3.0 傳輸孔 ( 向下支援 USB 2.0 & 1.1) 傳輸速度 : 最高傳輸速度高達 5 Gbps w/usb 3.0 最高傳輸速度高達 480 Mbps w/usb 2.0 電源供應 : 4Pin 週邊裝置電源插口 電源輸出 : +5V / 900mA ( 每埠 ) 產品尺寸 : 120 x 81 x 19mm 系統支援 : Microsoft Windows XP / Vista(32/64bit) / 7(32/64bit) USB 3.0 Port 1 USB 3.0 Port 2 7
硬體安裝 (1) 將您的電腦關機並移除電源線以及所有的周邊裝置, 像是網路線螢幕線等等... (2) 將您電腦的蓋板打開. 多數的標準個人電腦, 在打開蓋板前需先移除螺絲, 通常螺絲的位置在電腦後方沿著蓋板的邊緣上 然而螺絲與蓋板的位置可能因為製造商而有所不同, 詳細請參考您電腦的使用手冊 (3) 當打開蓋板之後, 找到位於主機板上未使用的 PCI Express 插槽 PCI Express 插槽通常位於電腦後方靠近擋板的地方 ( 正確 PCI Express 插槽位置請參考您電腦的使用手冊或是本頁的插圖, 萌科技勁速 2-Port PCI-e USB 3.0 介面卡可以安裝在任何 x1 x4 x8 x16 的 PCI Express 插槽效能可能會因為插槽而有所不同 ) 8
硬體安裝 (4) 將萌科技勁速 2-Port PCI-e USB 3.0 介面卡從防靜電袋中拿出, 接頭 ( 金手指 ) 朝下插入未使用的 PCI Express 插槽 安裝完成請確認介面卡的接頭 ( 金手指 ) 完全插入 PCI Express 插槽 (5) 當 PCI Express 插槽介面卡正確安裝之後, 將螺絲鎖緊 (6) 將 4-Pin 電源線連接到電源接頭 (7) 現在即可將電腦的蓋板裝上並連接您所有的周邊裝置與纜線 9
軟體安裝 1. 將驅動程式光碟置入光碟機, 進入 "Driver" 資 料夾雙擊 Setup.exe ( 圖 -1) 即可開始安裝 ( 圖 -1) 2. 點選 " 下一步 "( 圖 -2), 點選 " 我接受授權合約 的條款 " 再點選 " 下一步 " ( 圖 -3) ( 圖 -2) ( 圖 -3) 3. 點選 " 安裝 " 開始安裝 ( 圖 -4) ( 圖 -4) 10
軟體安裝 4. 等待安裝程序完成後 ( 圖 -5) 點選完成結束安裝 ( 圖 -6) ( 圖 -5) ( 圖 -6) 11
保固說明事項 正常使用下若產品發生故障問題,1 年保固 ( 如產品序號貼紙損壞或遺失, 恕不提供保固服務 ) 萌銓科技實業股份有限公司 114 台北市內湖區潭美街 588 號 2 樓 電話 :+886-2-87927289 傳真 :+886-2-87920373 客服信箱 :cs@mukii.com.tw 業務信箱 :sales@mukii.com.tw 12