HVA-3528DER 3528 PLCC4 系列产品 / Products Series 具有高发光效率 高一致性 高稳定性 高可靠性, 主要用于汽车应用 High luminous efficiency, consistency, stability and reliability, it is mainly used in automobile applications. 特征 外观 : 白色 PPA 塑料, 无色透明树脂封装 50% IV 视角度 :120 颜色 : 琥珀色 (617nm) 资格 : 通过了 AEC-Q102 & IEC 60810 可靠性测试 Features Package:Colorless clear resin in white PPA cup Viewing angle at 50% IV: 120 Color: Amber (617nm) Qualifications: Passed reliability test per AEC-Q102 & IEC 60810 requirement 应用 信号灯 汽车内外部照明应用 Applications Signaling Interior and exterior lighting for automotive Rev NO: A/1 Page: 1 of 13
订购信息 / Ordering Information 型号 Type 发光强度 Luminous Intensity IV @ If =50mA 订单编号 Ordering Code HVA-3528DER - XXXX - XX - XXXX I I I 亮度档 颜色档 电压档 Brightness Color Forward Voltage 1.80-4.50 cd XXXXXX 备注 亮度档单个最小包装只装有同一个亮度档次的产品, 具体分档信息请见第 4 页例如 :HVA-3528DER-BACB-XX-XXXX, 单个卷盘中的产品只有 BA BB CA CB 中的某一档 颜色档单个最小包装只装有同一个颜色档次的产品, 具体分档信息请见第 4 页例如 :HVA-3528DER-XXXX-24-XXXX, 单个卷盘中的产品只有 2 3 4 中的某一档 正向电压档单个最小包装只装有同一个正向电压档次的产品, 具体分档信息请见第 4 页例如 :HVA-3528DER-XXXX-XX-3A5A, 单个卷盘中的产品只有 3A 3B 4A 4B 5A 中的某一档 Note Brightness Grouping Only one brightness group will be packed in each reel. Please refer to page #4 for details. E.g.: HVA-3528DER-BACB-XX-XXXX, means only one bin of BA, BB, CA or CB is in each reel. Color Groups Only one color group will be packed in each reel. Please refer to page #4 for details. E.g.: HVA-3528DER-XXXX-24-XXXX, means only one bin of 2, 3 or 4 is in each reel. Forward Voltage Groups Only one forward voltage group will be packed in each reel. Please refer to page #4 for details. E.g.: HVA-3528DER-XXXX-XX-3A5A, means only one bin of 3A, 3B, 4A, 4B or 5A is in each reel. Rev NO: A/1 Page: 2 of 13
极限参数 / Maximum Ratings 参数 符号 数值 单位 Parameters Symbol Rating Unit 结温 / Junction Temperature Tj 125 正向电流 / Forward Current (Ts=25 ) 峰值正向电流 Peak Forward Current (t 10us;D=0.005;Ts=25 ) 反向电压 / Reverse Voltage (Ts=25 ) 抗静电能力 Electrostatic Discharge (HBM) If 70 ma Ifp 100 ma Vr 12 V VESD 2000 V 操作温度 / Operating Temperature Topr -40 ~ +100 储存温度 / Storage Temperature Tstg -40 ~ +100 特性 / Characteristics (Ts = 25 ; If = 50 ma) 参数 符号 数值 单位 Parameters Symbol Rating Unit 峰值波长 / Wavelength at Peak Emission typ. λpeak 624 nm min. λdom 612 nm 主波长 / Dominant Wavelength typ. λdom 617 nm max. λdom 624 nm 半波宽 / Spectral Bandwidth at 50% Irel max typ. Δλ 18 nm 50 % IV 下的视角度 / Viewing Angle at 50 % IV typ. 2Φ 120 min. Vf 1.90 V 正向电压 / Forward Voltage typ. Vf 2.15 V max Vf 2.65 V 反向电流 / Reverse Current typ. Ir 0.2 ua (VR=12V) max. Ir 10 ua 实际热阻值 (PN 结 - 环境 )/ Real Thermal Resistance (Junction / Ambient) 实际热阻值 (PN 结 - 焊点 )/ Real Thermal Resistance (Junction / Solder Point) max. max. Rth JAreal 300 K/W Rth JSreal 130 K/W Rev NO: A/1 Page: 3 of 13
亮度分档 / Brightness Grouping (Ts = 25 ; If = 50 ma) 档次 Grouping 发光强度 Luminous Intensity IV(min.) 发光强度 Luminous Intensity IV(max.) 光通量 Luminous Flux Φv(typ.) BA 1.80 cd 2.24 cd 6.10 lm BB 2.24 cd 2.80 cd 7.60 lm CA 2.80 cd 3.55 cd 9.50 lm CB 3.55 cd 4.50 cd 12.10 lm 正向电压分档 / Forward Voltage Grouping (Ts = 25 ; If = 50 ma) 档次 Grouping 正向电压 Forward Voltage Vf(min.) 正向电压 Forward Voltage Vf(max.) 3A 1.90 V 2.05 V 3B 2.05 V 2.20 V 4A 2.20 V 2.35 V 4B 2.35 V 2.50 V 5A 2.50 V 2.65 V 主波长分档 / Dominant Wavelength Grouping (Ts = 25 ; If = 50 ma) 档次 Grouping 主波长 Dominant Wavelength λdom(min.) 主波长 Dominant Wavelength λdom(max.) 2 612 nm 616 nm 3 616 nm 620 nm 4 620 nm 624 nm Rev NO: A/1 Page: 4 of 13
标签信息 / Information on Label 例 / E.g.:BA-2-3A 亮度档 / Brightness 颜色 / Color 正向电压 / Forward Voltage BA 2 3A 相对发射光谱 - V(λ) = 标准人眼视觉曲线 Relative Spectral Emission - V(λ) = Standard Eye Response Curve Irel = f (λ); Ts = 25 ; If = 50 ma Irel 1 0.8 :Vλ :Amber 0.6 0.4 0.2 0 400 450 500 550 600 650 700 750 800 nm Rev NO: A/1 Page: 5 of 13
辐射特性 / Radiation Characteristics Irel = f (ϕ); Ts = 25 正向电流 / Forward Current If = f (Vf); Ta = 25 相对亮度特性曲线 / Relative Luminous Intensity Iv / Iv (50 ma) = f (If); Ta = 25 If (ma) 60 40 20 10 Iv 1.2 Iv (50mA) 1.0 0.8 0.6 0.4 2.0 2.1 2.2 2.3 10 20 40 60 Vf (V) If (ma) Rev NO: A/1 Page: 6 of 13
相对正向电压 / Relative Forward Voltage ΔVf = Vf - Vf (25 ) = f (Tj); If = 50 ma 相对发光强度 / Relative Luminous Intensity Iv / Iv (25) = f (Tj); If = 50 ma Vf (V) 0.2 T j< 125 Iv Iv (25 ) 1.4 Tj< 125 0.1 1.1 0.0 0.8-0.1 0.5-40 0 40 80 120 Tj ( ) -40 0 40 80 120 Tj ( ) 环境温度与正向电流 Ambient Temperature vs. Forward Current If = f (Ta) 焊点温度与正向电流 / Solder Point Temperature vs. Forward Current If = f (Ts) If (ma) Tj< 125 If (ma) Tj< 125 80 80 60 60 40 40 20 20 30 60 90 120 30 60 90 120 Ta ( ) Ts ( ) Rev NO: A/1 Page: 7 of 13
1.1± 0.1 2.6± 0.1 3.5± 0.1 3.2± 0.1 0.8± 0.1 HVA-3528DER 产品尺寸 / Package Outline 2.8± 0.1 1.9± 0.1 A 1.5± 0.1 A Φ? 2.4± 0.1 A A A C 0.7± 0.1 A C 阴极标记 Cathode Marking 0.8± 0.1 备注 统计质量 : 30mg 标记 : 阴极 腐蚀试验 : Class 3B 测试条件 : 1) H2S 测试 :40 / 90%R.H, 15ppm, 336 小时 ( 标准 IEC 60068-2-43) 2) 流动混合气体测试 : 25 / 75 %R.H, 500 小时 ( 标准 IEC 60068-2-60 方法 4: 10ppb H2S, 200ppb SO2, 200ppb NO2, 10ppb Cl2) NOTE Approximate Weight: 30mg Mark: Cathode Corrosion test: Class 3B Test conditions: 1) H2S test:40 / 90%R.H, 15ppm, 336hours (Standards IEC 60068-2-43) 2) Flowing mixed gas test: 25 / 75 %R.H, 500hours (Standards IEC 60068-2-60 test method 4: 10ppb H2S, 200ppb SO2, 200ppb NO2, 10ppb Cl2) 推荐焊盘 / Recommended Solder Pad 1.5± 0.1 注释 不适合超声波清洗的封装 NOTE Package not suitable for ultrasonic cleaning 0.8± 0.1 Rev NO: A/1 Page: 8 of 13
温度 / Temperature HVA-3528DER 回流焊要求 / Reflow Soldering Profile 280 240 200 160 217 Tp245 tp tl 120 80 Ts 100 40 25 时间 / Time 30 60 90 120 150 180 210 240 270 300 S 主要特性 Profile Feature 符号 Symbol 无铅焊接 Pb-Free (SnAgCu) Assembly min. rec. max. 单位 Unit 预热升温速率 Ramp-up Rate to Preheat 25-150 时间 / Time (Tsmin to Tsmax) 峰值升温速率 Ramp-up Rate to Peak (Tsmax to Tp) 熔点温度 Liquidus Temperature 高于熔点温度的时间 Time above Liquidus Temperature - - 2 3 /s Ts 60 100 120 s - - 2 3 /s Tl 217 tl - 80 100 s 峰值温度 / Peak Temperature Tp - 245 260 规定的峰值温度 ±5 以内的时间 Time within 5 of the Specified Peak Temperature 降温速率 / Ramp-down Rate (Tp to 100 ) 时间 / Time (25 to Tp) tp 10 20 30 s - - 3 6 /s - - - 480 s Rev NO: A/1 Page: 9 of 13
卷带与卷盘 / Tape and Reel W1 W1 D0 D0 P0 P2 P0 E P2 E 标签标签 Label Label F W F W R N AR N A P1 P1 卷带方向卷带方向 Direction Direction of unreeling of unreeling W2 W2 卷带方向卷带方向 Direction Direction of unreeling of unreeling 前端空带 : 最小 400 mm; 尾端空带 : 最小 160 mm; 尺寸符合 : IEC 60286-3, EIA 481- D 标准 Leader: min. 400 mm;trailer: min. 160 mm;requirement acc. to IEC 60286-3, EIA 481-D 卷带尺寸 / Tape Dimensions(mm) W P0 P1 P2 D0 E F 8±0.1 4±0.1 4±0.1 2±0.05 1.5±0.1 1.75±0.1 3.5±0.05 卷盘尺寸 / Reel Dimensions(mm) A W1 W2 N R 177.8 9.3±0.3 11.2±0.3 58.5±0.2 13.5±0.2 Rev NO: A/1 Page: 10 of 13
条形码标签 / Barcode-Product-Label (BPL) 包装材料及过程 / Dry Packing Process and Materials 湿度卡 / HIC + 标签 标签 / Label 干燥剂 / Desiccant 铝箔袋 Aluminum moisture-proof bag 备注 NOTE 产品包装在一个干燥的铝箔袋里, 同时内附有干燥剂和湿度卡 对于干燥包装, 您可以从网络或 JEDEC 标准里获取 Moisture-sensitive product is packed in a dry bag containing desiccant and HIC (humidity indicator card). Regarding dry pack you may find further information in the internet or JEDEC. Rev NO: A/1 Page: 11 of 13
出货包装及材料 / Transportation Packing and Materials 条形码标签 Bar Code Label 注意事项 Caution Statement 条形码标签 Bar Code Label 出货箱尺寸 / Dimensions of Transportation Box (mm) 宽度 / Width 长度 / Length 高度 / Height 256±5 256±5 223±5 223±5 62±5 124±5 Rev NO: A/1 Page: 12 of 13
注释 典型值 : 每个产品的实际值可能与这些统计出的典型值不同 公差 : 除非图纸中有说明, 公差默认为 ±0.1 mm 正向电压 : 正向电压是在 8ms 脉冲电流并且内部在线性为 ±0.05V 和一个 ±0.1V 的外在不确定性 ( 按照 GUM K=3 因子 ) 来进行测试的 波长 : 波长是在 25ms 脉冲电流并且内部在线性为 ±0.5nm 和一个 ±1nm 的外在不确定性 ( 按照 GUM K=3 因子 ) 来进行测试的 亮度 : 亮度是在 25ms 脉冲电流并且内部在线性为 ±8% 和一个 ±11% 的外在不确定性 ( 按照 GUM K=3 因子 ) 来进行测试的 特殊声明 : 本版本最终解释权归属鸿利智汇, 当中英文意思发生歧义时, 以中文为准 Glossary Typical Values: Actual values of each product may differ from these statistical values. Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with +/ -0.1mm. Forward Voltage: The forward voltage is measured during a current pulse of typically 8 ms, with an internal reproducibility of ± 0.05 V and an expanded uncertainty of ± 0.1 V (acc. to GUM with a coverage factor of k = 3). Wavelength: The wavelength is measured at a current pulse of typically 25 ms, with an internal reproducibility of ± 0.5 nm and an expanded uncertainty of ± 1 nm (acc. to GUM with a coverage factor of k = 3). Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of ± 8% and an expanded uncertainty of ± 11% (acc. to GUM with a coverage factor of k = 3). Special Statement: The final interpretation of this specification shall be vested in Honglitronic, in the case of ambiguity, the Chinese version shall prevail. Rev NO: A/1 Page: 13 of 13