设置 Foobar2000 播放器 Setting Foobar2000 player 1. 如果你还没有在你的电脑上安装 Foobar2000 播放器, 请到 Foobar2000 官网下载正版播放器, 网址 :http://www.foobar2000.org/ If you have not installed Foobar2000 player, you can download and install it from http://www.foobar2000.org/, 2. 想要在 Foobar2000 中播放 DSD 文件, 先要安装 ASIO 应用 If you want play DSD files in Foobar2000 player, you need install ASIO first. 1). 双击运行 ASIOProxyInstall-0.7.1, 点击 Next Double-click the file ASIOProxyInstall-0.7.1,click Next 2). 选择安装目录, 点击 Install Select where you want to install and click " Install "
3). 安装完成, 点击 close After the installation, click " close " 3. 安装 ASIO 应用后, 打开 Foobar2000 播放器, 点击 File Preferences After install ASIO, open Foobar2000 player, and click : File Preferences 4. 点击 Component, 再点击 Install Click Component, and then click on " Install "
5. 找到磁盘里的附件文件 foo_out_asio.fb2k-component ( 这是输出 DSD 数据的插件 ) 跟 foo_input_sacd.fb2k-component ( 这是播放 DSD 文件的插件 ) 文件, 选择, 点打开 Find the attached files "foo_out_asio.fb2k-component" (a plug-in for DSD data output) and "foo_input_sacd.fb2k-component" (a plug-in for played DSD file), and open them. 6. 在 Installed component 窗口中可以看到 Foo_out_asio, Foo_input_scad,
点击 OK Find Foo_out_asio and Foo_input_scad in the Installed component window, and click OK 7. 点击确定./ Click Yes. 8. 重启 Foobar2000 播放器, 点击 FilePreferences, 点击 Components, 可以看到
Foo_out_asio, Foo_input_sacd 安装成功了 After restarting Foobar2000 player, click File Preferences, and click Components, and then Foo_out_asio and Foo_input_sacd appears. The installation of them is completed. 9. 设置 DSD 输出通道, 点 Output, 在 Device 窗口选择 ASIO:foo_dsd_asio 输出模式 Click Output, and select the output pattern ASIO:foo_dsd_asio in the Device window to set the DSD output channels
10. 设置输出通道参数, 点击 OUTPUT 下面的 ASIO, 在右边的 ASIO DRIVES 窗口中, 双击 foo_dsd_asio Set the output channel parameters: Click the OUTPUT below the ASIO, and double-click the window following foo_dsd_asio in the right-side column ASIO DRIVES window. 11. 弹出的窗口, 设置如下 : DSD playback Method 可选 NATIVE 模式或 DOP 模式.( 注 : NATIVE 模式与 DOP 模式都是输出 DSD 数据, 只是传输数据的方式不同 ) 设置一次它就可以保存了, 以后不用每次开机都设置, 除非要更改设置参数 Setting DSD playback Method is AISO Native or DOP marker. (Note: both are output DSD data, the difference between the two patterns is the ways to output DSD data) Except changing the settings parameters, this setting can be saved forever.
12. SACD 设置 ( 也就是 FOOBAR 解 DSD 的模式 ), 点击 TOOLS 下面的 SACD, 右边就是可设置的参数. Setting of SACD( the method of FOOBAR to decoding DSD file): Click SACD below TOOLS. The settable parameters are in the right column. 1) 第 1 项的 ASIO DRIVER MODE, 选择 DSD, 那么 FOOBAR 就是输出 DSD 数据, 属于硬解 DSD; 如果选择 PCM, 那么 FOOBAR 就是输出 PCM 数据, 属于软解 DSD; In the first item ASIO DRIVER MODE, if you choose DSD, the player is output DSD data when play DSD file. If you choose is PCM, the player is output PCM data when play DSD file; 2) 下面的 2/3 项指的是当 FOOBAR 转成 PCM 数据时 ( 也就是第 1 项选 PCM), 可以设 定 PCM 数据的输出大小跟采样率.
The content in the following 2/3 item refers to setting the Gain and sampling rate of PCM data when you selects PCM in the first item 3) 第 4 项指 DSD 转成 PCM 的模式, 第 5 项指可选范围. The fourth item refers to the ways of change DSD date to PCM date. The fifth item refers to preferable area. 4) 当第一项选择 DSD 时, 第 2-5 项不用理会它. 我们的机子能硬解 DSD, 所以第一项选择 DSD 为佳 If you choose DSD in the first item, you can skip the 2 nd -5 th items ( 设置一次它就可以保存了, 以后不用每次开机都设置, 除非要更改设置参数 ) Except changing the settings parameters, this setting can be saved forever 播放 DSD 音乐 / Playback DSD files 1. 直接点击播放 DSD 格式的歌曲, 由于 DSD 格式是 1Bit 采样, 所以是看不到跳动的波形的, 但可以看到歌曲信息 Play the DSD format of songs. You can see the information of songs without the
beaten waves. because the DSD file belongs to 1Bit sampling, 或者双击电脑右下角的 THS 图标查看歌曲信息 Double-click the TUSB icon in the bottom-right corner of the screen to check songs
information. 2. 播放 DSD 音乐时要注意的事项 Attentions for playing DSD format of songs 1) 电脑的主音量要设置在最大, 否则放 DSD 时会没有声音 Set the main volume in computer to the maximum, otherwise, it will be wrong when you play DSD format of songs 2). THS 控制面板的音量要设置在最大, 否则播放 DSD 时会没有声音 Set the volume of TUSB to the maximum, or else, it will be wrong when you play DSD format of songs
3). 输出通道一定要选 foo_dsd_asio 通道, 否则 DSD 数据无法输出 Choose the foo_dsd_asio for output channel of FOOBAR, or else, the DSD signal cannot be output.