VC890C+/VC890D数字万用表使用说明书
|
|
|
- 恩 刁
- 7 years ago
- Views:
Transcription
1 MT /2 Digital Multimeter User s Manual 1 st Edition, Copyright by Prokit s Industries Co., Ltd.
2 SUMMARIZE The meter is a stable multimeter with 26mm LCD display, driven by battery. It s widely used on measuring DCV, ACV, DCA, ACA, resistance, capacitance, diode, transistor, continuity test and temperature. Ideal for lab, factory and family use. SAFETY NOTE The meter meets the standards of IEC1010. Read the operation manual carefully before operation. 1. Do not input limit over-ranged. 2. The voltage below 36V is safety. To avoid electric shock, check whether the test leads are connected correctly, whether the insulation is good when measuring over 36DCV or 25ACV. 3. Remove the test leads when changing function and range. 4. To select correct function and range, beware of error operation. 5. Do not operate the meter if battery case and back cover is not fixed. 6. Do not input voltage when measuring resistance. 7. Remove test leads from test point and turn off the power before replacing battery and fuse. 8. SAFETY SYMBOLS indispensably refer to the manual, GND, " Double Insulation, low battery CHARACTERISTIC 1. GENERAL 1-1. Displaying: LCD displaying Max. displaying: 1999 (3 1/2digit) auto polarity indication Measuring method: dual slope A/D conversion Sampling rate: approx. 3 times/second Overrange indication: the LCD displays"1" or "-1" Low battery indication:" " appears Operation environment: (0~40) C, R.H.<80%. 1
3 1-8. Power: 9V 1(NEDA1604/6F22 or equivalent model) not included Size: mm Weight: approx. 320g (Without Battery). 2. TECHNICAL CHARACTERISTIC 2-1. Accuracy: ±(a% rdg+d) at (23±5 C)<R.H.<75% 2-2. TECHNICAL DATA DCV RANGE ACCURACY RESOLUTION 200mV 100uV 2V ±(0.5%+3d) 1mV 20V 10mV 200V 100mV 1000V ±(0.8%+10d) 1V Input resistance: 10MΩ for all ranges. Overload protection: 250V DV or AC peak value at 200mV range. 1000V DC or AC peak value at other ranges ACV RANGE ACCURACY RESOLUTION 2V 1mV ±(0.8%+5d) 20V 10mV 200V 100mV 750V ±(1.2%+10d) 1V Input resistance: 10MΩ Overload protection: 1000V DC or AC peak value Frequency response: (40~200)Hz Display: sine wave RMS (mean value response) DCA RANGE ACCURACY RESOLUTION 200uA 0.1uA ±(0.8%+10d) 20mA 10uA 2
4 200mA ±(1.2%+8d) 100uA 20A ±(2.0%+5d) 10mA Max. input volt drop: 200mV Max. input current: 20A (the test time should be in 10 seconds) 0.2A/250V Self-resettable fuse; 20A/250V fast-blown fuse ACA RANGE ACCURACY RESOLUTION 20mA ±(1.0%+5d) 10uA 200mA ±(2.0%+5d) 100uA 20A ±(3.0%+10d) 10mA Max. measuring volt drop: 200mV Max. input current: 20A (the test time should be in 10 seconds) 0.2A/250V Self-resettable fuse ; 20A/250V fast-blown fuse Frequency response: (40~200)Hz Display: sine wave RMS (mean value response) RESISTANCE(Ω) RANGE ACCURACY RESOLUTION 200Ω ±(0.8%+5d) 0.1Ω 2kΩ 1Ω 20kΩ ±(0.8%+3d) 10Ω 200kΩ 100Ω 20MΩ ±(1.0%+25d) 10kΩ 200MΩ ±(5.0%+10d) 100kΩ Open voltage: less than 0.7V Overload protection: 250V DC and AC peak value NOTE: at 200Ω range, the test leads should be short-circuit, and measure the down-lead resistance, then, subtract from the real measuring. WARNING: DO NOT input any voltage at resistance range for safety! CAPACITANCE (C) 3
5 RANGE ACCURACY RESOLUTION 20nF 10pF ±(2.5%+20d) 20uF 10nF ±(5.0%+20d) 100nF 200uF >100uF (only for reference) Overload protection: 36V DC or AC peak value WARNING: DO NOT input any voltage at this range for safety! TEMPERATURE( C) RANGE ACCURACY RESOLUTION (-20~1000) C < 400 C±(1.0%+5d) 400 C±(1.5%+15d) 1 C Sensor: K-type thermocouple with banana plug WARNING: DO NOT input any voltage at this range for safety! DIODE AND CONTINUITY TEST Range Displaying value Test condition Positive voltage drop of diode The positive DC current is approx. 1mA, negative Buzzer sounds, the resistance is less than (70±20)Ω voltage is approx. 3V open voltage is approx. 3V Overload protection: 250V DC or AC peak value Triode hfe test Range Displaying value Test condition hfe NPN or PNP 0~1000 Basic current is approx.10ua,vce is approx.3v WARNING: DO NOT input any voltage at this range for safety! 4
6 OPERATION 3.1 Front panel description 1. Model 2. LCD display 3. Back light switch 4. Power switch 5. Range knob 6. 20A current jack 7. Less than 200mA current, Capacitance,Temperature +, HFE jack 8. COM: capacitance, temperature -, hfe test accessory, diode, continuity jack 9. Volt, resistance, diode and continuity jack 10. Hold switch 11. LED indicator light 3.2 DCV MEASUREMENT 1. Insert the black test lead to " COM " jack, the red one to V/Ω jack. 2. Set the range knob to a proper DCV range, connect the test leads across to the circuit under tested, the polarity and voltage of the point which red lead connect will display on LCD. NOTE: 1. If the measured voltage is unsure beforehand, should set the range knob to the highest range, then, switch to a proper range according to the displayed value. 2. If LCD displays "1", it means overrange, should set the range knob to a higher range. 3.3 ACV MEASUREMENT 1. Insert the black test lead to "COM " jack, the red one to V/Ω jack. 2. Set the range knob to a proper ACV range, connect the 5
7 test leads across to the circuit under tested. NOTE: 1. If the measured voltage is unsure beforehand, should set the range knob to the highest range, then, switch to a proper range according to the displayed value. 2. If LCD displays "1", it means overrange, should set the range knob to a higher range. 3.4 DCA MEASUREMENT 1. Insert the black test lead to "COM " jack and the red one to "ma" jack(max. 200mA),or insert the red one to "20A" jack(max. 20A). 2. Set the range knob to a proper DCA range, connect the test leads across to the circuit under tested, the current value and polarity of the point which red lead connect will display on LCD. NOTE: 1. If the measured current is unsure beforehand, should set the range knob to a higher range, then, switch to a proper range according to the displayed value. 2. If LCD displays "1", it means overrange, should set the range knob to a higher range. 3. Max. input current is 200mA or 20A (subject to where red lead insert), excessive current will blow the fuse. Be careful when measuring. Continuously measuring large current may heat the circuit, affect the accuracy, eve damage the meter. 3.5 ACA MEASUREMENT 1. Insert the black test lead to "COM" jack and the red one to "ma" jack(max. 200mA), or insert the red one to "20A" jack (max. 20A). 2. Set the range knob to a proper ACA range; connect the test leads across to the circuit under tested. NOTE: 1. If the measured current range is unsure beforehand, should set the range knob to the highest range, then set 6
8 to a proper range according to the displayed value. 2. If LCD displays "1", it means overrange, should set the range knob to a higher range. 3. Max. input current is 200mA or 20A (subject to where the red lead insert to), excessive current will blow the fuse. Be careful when measuring. Continuously measuring large current may heat the circuit, affect the accuracy, even damage the meter. 3.6 RESISTANCE MEASUREMENT 1. Insert the black test lead to "COM" jack and the red one to "V/Ω" jack. 2. Set the range knob to a proper resistance range, connect the test leads across to the resistance under measured. NOTE: 1. If the resistance value being measured exceeds the max value of the range selected, LCD displays "1", thus, should set the range knob to a higher range. When the resistance is over 1MΩ, the meter may take a few seconds to stabilize. This is normal for high resistance readings. 2. When input terminal is in open circuit, overload displays. 3. When measuring in-line resistance, be sure that power is off and all capacitors are released completely. 3.7 CAPACITANCE MEASUREMENT 1. Insert the red test lead to " ma" terminal and the black one to " COM " jack. 2. Set the range knob to a proper capacitance range, connect the test leads to the capacitor under measured (note: the polarity of red test lead is"+"). NOTE: 1. If the capacitance range under measured is unsure beforehand, should set the range knob to the highest range, then, set to a proper range according to the displayed value. 2. If LCD displays "1", it means overrange, should set the 7
9 range knob to a higher range. 3. Before measuring, LCD display might not be zero, the residual reading will be decreased gradually and could be disregarded. 4. When measuring large capacitance, if creeps seriously or break capacitance, LCD will display some instability value. 5. Discharge all capacitors completely before capacitance measurement to avoid damage. 6. UNIT: 1uF =1000nF 1nF=1000pF 3.8 DIODE AND CONTINUITY TEST 1. Insert the black test lead to "COM" terminal and the red one to "V/Ω" jack ( Note: the polarity of red test lead is"+"). 2. Set the range knob to " " range, connect the test leads to the diode under measured, reading is the approximation of the diode positive volt drop. 3. Connect the test leads to two points of the measured circuit, if buzzer sounds, the resistance is lower than approx. (70±20)Ω. 3.9 TEMPERATURE MEASUREMENT Insert the cathode of thermocouple s cold end to " COM" jack and anode to " ma" terminal, put the working end on or in the tested object, temperature value can be read on LCD in Celsius TRIODE hfe 1. Set the range knob to hfe. 2. Insert the test accessory into COM and ma terminal. 3. Verify the type of the transistor is NPN or PNP, insert the emitter, basic and collector to the proper jack on test accessory AUTO POWER OFF Stop working around 15 minutes, the instrument will auto off and get into the sleeping mode. To restart the meter, press 8
10 power button twice for back to working status. MAINTENANCE It s a precision meter, DO NOT try to verify the circuit 1. Beware of waterproof, dustproof and shockproof. 2. Do not operate and store the meter in the circumstance of high temperature, high humidity, and flammability, explosive and strong magnetic field. 3. Use the damp cloth and soft solvent to clean the meter, do not use abrasive and alcohol. 4. If do not operate it for a long time, should take out the battery When LCD displays " " symbol, should replace the battery as below: Remove the battery compartment screws and pull out the battery compartment Take out the battery and replace a new one. It s better to use alkalescency battery for long time use Fix the battery case If the meter does not work properly, check the meter as following: CONDITIONS NO DISPLAYING SYMBOL DISPLAYS NO CURRENT INPUT VALUE ERROR WAY TO SOLVE Power is off Replace battery Replace battery Replace fuse Replace battery 9
11 MT /2 數位電錶 使用說明書 一 概述 MT-1280 儀錶是一種性能穩定 用電池驅動的高可靠性數位萬用表 儀錶採用 26mm 字高 LCD 顯示器, 讀數清晰 更加方便使用 此系列儀錶可用來測量直流電壓和交流電壓 直流電流和交流電流 電阻 電容 二極體 三極管 通斷測試 溫度等參數 整機以雙積分 A/D 轉換為核心, 是一台性能優越的工具儀錶, 是實驗室 工廠及家庭理想工具 二 安全事項 該系列儀錶在設計上符合 IEC1010 條款 ( 國際電工委員會頒佈的 安全標準 ), 在使用之前, 請先認真閱讀說明書 1. 各量程測量時, 禁止輸入超過量程的極限值 2. 36V 以下的電壓為安全電壓, 在測高於 36V 直流 25V 交流 電壓時, 要檢查錶棒是否可靠接觸, 是否正確連接 是否絕 緣良好等, 以避免電擊 3. 換功能和量程時, 錶棒應離開測試點 4. 選擇正確的功能和量程, 謹防誤操作, 該系列儀錶雖然有全 量程保護功能, 但為了安全起見, 仍請您多加注意 5. 在電池沒有裝好和後蓋沒有上緊時, 請不要使用此表進行測 試工作 6. 測量電阻時, 請勿輸入電壓值 7. 在更換電池或保險絲前, 請將測試錶棒從測試點移開, 並關 閉電源開關 8. 安全符號說明 : " 操作者必須參閱說明書 " 接地, " 雙絕緣, " 低電壓符號 10
12 三 特性 1. 一般特性 1-1. 顯示方式 :LCD 液晶顯示 1-2. 最大顯示 :1999(3 1/2 位 ) 自動極性顯示 1-3. 測量方式 : 雙積分式 A/D 轉換 1-4. 採樣速率 : 約每秒鐘 3 次 1-5. 超量程顯示 : 最高位顯 1" 或 -1" 1-6. 低電壓顯示 : " 符號出現 1-7. 工作環境 :(0~40), 相對濕度 <80% 1-8. 電源 : 一只 9V 電池 (NEDA1604/6F22 或同等型號 ) ( 不含電池 ) 1-9. 體積 ( 尺寸 ): mm ( 長 寬 高 ) 重量 : 約 320g( 不含電池 ) 附件 : 使用說明書一本 外包裝盒 錶棒一副 K 型熱電偶一支 電晶體 / 電容測試座 2. 技術特性 2-1. 準確度 :±(a% 讀數 + 字數 ), 保證準確度環境溫度 : (23±5) C, 相對濕度 <75% 2-2. 測試功能..直流電壓 DCV 交流電壓 ACV. 直流電流 DCA 交流電流 ACA 電阻 Ω 二極體 / 通斷 電容 C 溫度 C 三極管 hfe 2-3. 技術指標 直流電壓 (DCV) 量程 準確度 分辨力 200mV 100uV 2V ±(0.5%+3d) 1mV 20V 10mV 200V 100mV 1000V ±(0.8%+10d) 1V 輸入阻抗 : 所有量程為 10MΩ 超載保護 :200mV 量程為 250V 直流或交流峰值 ; 其餘為 1000V 直流或交流峰值 11
13 交流電壓 (ACV) 量程 準確度 分辨力 2V 1mV ±(0.8%+5d) 20V 10mV 200V 100mV 750V ±(1.2%+10d) 1V 輸入阻抗 :10MΩ 超載保護 :1000V 直流或交流峰值 ; 頻率回應 :40~200Hz 顯示 : 正弦波有效值 ( 平均值響應 ) 直流電流 (DCA) 量程 準確度 分辨力 200uA 0.1uA ±(0.8%+10d) 20mA 10uA 200mA ±(1.2%+8d) 100uA 20A ±(2.0%+5d) 10mA 最大輸入壓降 :200mV 最大輸入電流 :20A( 測試時間不超過 10 秒 ) 0.2A/250V 自恢復保險絲 ;20A/250V 速熔保險絲 交流電流 (ACA) 量程 準確度 分辨力 20mA ±(1.0%+5d) 10uA 200mA ±(2.0%+5d) 100uA 20A ±(3.0%+10d) 10mA 最大測量壓降 :200mV 最大輸入電流 :20A( 測試時間不超過 10 秒 ) 頻率回應 :(40~200)Hz 顯示 : 正弦波有效值 ( 平均值響應 ) 0.2A/250V 自恢復保險絲 ;20A/250V 速熔保險絲 12
14 電阻 (Ω) 量程 準確度 分辨力 200Ω ±(0.8%+5d) 0.1Ω 2kΩ 1Ω 20kΩ ±(0.8%+3d) 10Ω 200kΩ 100Ω 20MΩ ±(1.0%+25d) 10kΩ 200MΩ ±(5.0%+10d) 100kΩ 開路電壓 : 小於 0.7V 超載保護 :250V 直流和交流峰值 ; 注意事項 : 在使用 200Ω 量程時, 應先將錶棒短路, 測得引線 電阻, 然後在實測中減去 ; 警告 : 為了安全在電阻量程禁止輸入電壓值! 電容 (C) 量程 準確度 分辨力 20nF 10pF ±(2.5%+20d) 20uF 10nF 200uF ±(5.0%+20d) 100nF >100uF( 僅供參考 ) 超載保護 :36V 直流或交流峰值 警告 : 為了安全在此量程禁止輸入電壓值! 溫度 ( ) 量程 準確度 分辨力 (-20~1000) C < 400 C±(1.0%+5d) 400 C±(1.5%+15d) 1 C 感測器 :K 型熱電偶 ( 鎳鉻 鎳硅 ) 香蕉插頭 警告 : 為了安全在此量程禁止輸入電壓值! 二極體及通斷測試 量程 顯示值 測試條件 二極體正向壓降 正向直流電流約 1mA, 反向電壓約 3V 蜂鳴器發聲長響, 測 開路電壓約 3V 13
15 試兩點阻值小於 (70±20)Ω 超載保護 :250V 直流或交流峰值 晶體三極管 hfe 參數測試 量程 顯示值 測試條件 hfe NPN 或 PNP 0~1000 基礎電流約 10uA, Vce 約為 3V 警告 : 為了安全在此量程禁止輸入電壓值! 四 使用方法 操作面牌說明 1. 產品型號 2. 液晶顯示面板 3. 背光照明按鍵 4. 電源開關按鍵 5. 旋鈕開關 : 選擇測量功能及量程 6. 20A 電流測試插座 7. 小於 200mA 電流測試, 電容, 溫度 +", 電晶體測試插座 8. 公共端 : 電壓 電阻 電容 溫度 -" 負極, 電晶體, 通斷及二極體測試插座 9. 電壓 電阻 通斷及二極體測試插座 10. 數據保持按鍵 11. LED 指示燈 直流電壓測量 1. 將黑錶棒插入 COM" 插座, 紅錶棒插入 V/Ω" 插座 ; 2. 將量程開關轉至相應的 DCV 量程上, 然後將測試錶棒跨接在被測電路上, 紅錶棒所接的該點電壓與極性顯示在螢幕上 注意 : 1. 如果事先對被測電壓範圍沒有概念, 應將量程開關轉到最高的檔位元, 然後根據顯示值轉至相應檔位上 ; 14
16 2. 如螢幕顯 1", 表明已超過量程範圍, 須將量程開關轉至較高檔位元上 交流電壓測量 1. 將黑錶棒插入 COM" 插座, 紅錶棒插入 V/Ω" 插座 ; 2. 將量程開關轉至相應的 ACV 量程上, 然後將測試錶棒跨接在被測電路上 注意 : 1. 如果事先對被測電壓範圍沒有概念, 應將量程開關轉到最高的檔位元, 然後根據顯示值轉至相應檔位上 2. 如螢幕顯 1", 表明已超過量程範圍, 須將量程開關轉至較高檔位上 直流電流測量 1. 將黑錶棒插入 COM" 插座, 紅錶棒插入 ma" 插座中 ( 最大為 200mA), 或紅錶棒插入 20A" 插座中 ( 最大為 20A) 2. 將量程開關轉至相應 DCA 檔位上, 然後將儀錶的錶棒串聯接入被測電路中, 被測電流值及紅色錶棒點的電流極性將同時顯示在螢幕上 注意 : 1. 如果事先對被測電流範圍沒有概念, 應將量程開關轉至較高檔位, 然後按顯示值轉至相應檔上 2. 如螢幕顯 1", 表明已超過量程範圍, 須將量程開關轉至較高檔位上 3. 持續量測大電流可能會造成產品損壞 交流電流測量 1. 將黑錶棒插入 COM" 插座, 紅錶棒插入 ma" 插座中 ( 最大為 200mA), 或紅錶棒插入 20A" 插座中 ( 最大為 20A) 2. 將量程開關轉至相應 ACA 檔位上, 然後將儀錶的錶棒串聯接入被測電路中 注意 : 1. 如果事先對被測電流範圍沒有概念, 應將量程開關轉到最高的檔位, 然後按顯示值轉至相應檔上 2. 如螢幕顯 1", 表明已超過量程範圍, 須將量程開關轉至較高的檔位上 3. 持續量測大電流可能會造成產品損壞 電阻測量 1. 將黑錶棒插入 COM" 插座, 紅錶棒插入 V/Ω" 插座 ; 2. 將量程開關轉至相應的電阻量程上, 然後將兩錶棒跨接在被 15
17 注意 : 1. 如果電阻值超過所選的量程值, 則會顯 1", 這時應將開關轉至較高檔位上 ; 當測量電阻值超過 1MΩ 以上時, 讀數需幾秒時間才能穩定, 這在測量高電阻時是正常的 2. 當輸入端開路時, 則顯示超載情形 3. 測量線上電阻時, 要確認被測電路所有電源已關斷及所有電容都已完全放電時, 才可進行 電容測量 1. 將紅錶棒插入 ma" 插座, 黑錶棒插入 COM" 插座 ; 2. 將量程開關轉至相應之電容量程上, 錶棒對應極性 ( 注意紅錶棒極性為 +" 極 ) 接入被測電容 注意 : 1. 如果事先對被測電容範圍沒有概念, 應將量程開關轉到最高的檔位 ; 然後根據顯示值轉至相應檔位上 2. 如螢幕顯 1", 表明已超過量程範圍, 須將量程開關轉至較高的檔位上 3. 在測試電容前, 螢幕顯示值可能尚未回到零, 殘留讀數會逐漸減小, 但可以不予理會, 它不會影響測量的準確度 ; 4. 大電容檔測量嚴重漏電或擊穿電容時, 將顯示一些數值且不穩定 5. 請在測試電容容量之前, 必須對電容應充分地放電, 以防止損壞儀錶 6. 單位 :1uF =1000nF 1nF=1000pF 二極體及通斷測試 1. 將黑錶棒插入 COM" 插座, 紅錶棒入 V/Ω" 插座 ( 注意紅表筆極性為 +" 極 ) 2. 將量程開關轉至 " 檔, 並將錶棒連接到待測試二極體, 讀數為二極體正向壓降的近似值 3. 將錶棒連接到待測線路的兩點, 如果兩點之間電阻值低於約 (70±20)Ω, 則內置蜂鳴器發聲 溫度測量測量溫度時, 將熱電偶感測器的冷端 ( 自由端 ) 負極插入 COM" 插座, 正極插入 ma" 插座中, 熱電偶的工作端 ( 測溫端 ) 置於待測物上面或內部, 可直接從螢幕上讀取溫度值, 讀數為攝氏度 三極管 hfe 16
18 1. 將量程開關置於 hfe 檔 ; 2. 將電晶體測試座插入 COM" 和 ma" 插座. 3. 確定所測電晶體為 NPN 或 PNP 型, 將發射極 基極 集電 極分別插入測試附件上相應的插孔 自動關機當儀錶靜置 15 分鐘後, 儀錶便自動斷電進入休眠狀態 ; 若要重新啟動電源, 再按兩次 POWER" 鍵, 就可重新接通電源 五 儀錶保養該系列儀錶是一台精密儀器, 使用者不要隨意更改電路 1. 請注意防水 防塵 防摔 ; 2. 不宜在高溫高濕 易燃易爆和強磁場的環境下存放 使用儀錶 ; 3. 請使用濕布和溫和的清潔劑清潔儀錶外表, 不要使用研磨劑及酒精等烈性溶劑 ; 4. 如果長時間不使用, 應取出電池, 防止電池漏液腐蝕儀錶 ; 4-1. 注意 9V 電池使用情況, 當螢幕顯示出 " 符號時, 應更換電池, 步驟如下 : A) 卸下電池盒固定螺絲, 退出電池盒 ; B) 取下 9V 電池, 換上一個新的電池, 雖然任何標準 9V 電池都可使用, 但為加長使用時間, 最好使用鹼性電池 ; C) 裝上電池門 六 故障排除如果您的儀錶不能正常工作, 下面的方法可以幫助您快速解決一般問題 如果故障仍排除不了, 請與維修中心或經銷商聯繫 故障現象沒顯示 檢查部位及方法電源未接通換電池換保險絲 符號出現換電池顯示誤差大換電池 本說明書如有改變, 恕不通知 ; 本說明書的內容被認為是正確的, 若用戶發現有錯誤 遺漏等, 請與生產廠家聯繫 本公司不承擔由於用戶錯誤操作所引起的事故和危害 本說明書所講述的功能, 不作為將產品用做特殊用途的理由 17
19 購買日期公司名稱聯絡電話電子郵箱聯絡地址 中國地區產品保固卡 店章 產品型號 MT-1280-C 在正常使用情況下, 自原購買日起 12 個月免費維修保證 ( 不含耗材 消耗品 ) 產品保固卡需蓋上店章 日期章, 其保固效力始生效 本卡請妥善保存, 如需維修服務時, 請出示本卡以為證明 保固期滿後, 屬調整 保養或是維修性質之服務, 則酌收檢修工時費用 若有零件需更換, 則零件費另計 產品保固說明 保固期限內, 如有下列情況者, 維修中心則得酌收材料成本或修理費 ( 由本公司維修人員判定 ): 對產品表面的損傷, 包括外殼裂縫或刮痕 因誤用 疏忽 不當安裝或測試, 未經授權打開產品修理, 修改產品或者任何其他超出預期使用範圍的原因所造成的損害 因事故 火災 電力變化 其他危害, 或自然災難所造成的損害 非服務保證內容 : 機件本體外之消耗品 : 如電池... 等消耗品 機件本體之外之附配件 : 如耳機麥克風, 電源供應器, 記憶卡, CD 等附配件 超過保證期限之檢修或服務, 雖未更換零件, 將依公司保固維修政策酌收服務費 服務電話 : / / / 服務傳真 :
20 19
OPERATION MANUAL
MT-5211 3-1/2 Digital LCR Multimeter User s Manual 1 st Edition, 2014 Copyright by Prokit s Industries Co., Ltd. OPERATION MANUAL SUMMARIZE The instrument is a stable digital multimeter driven by battery.
SAFETY INFORMATION This multimeter has been designed according to IEC 1010 concerning electronic measuring instruments with an overvoltage category (C
OPERATOR S INSTRUCTION MANUAL 903-150NAS 903-150NBS 303-150NCS 903-150NDS For 303-150NCS DIGITAL MULTIMETER SAFETY INFORMATION This multimeter has been designed according to IEC 1010 concerning electronic
K301Q-D VRT中英文说明书141009
THE INSTALLING INSTRUCTION FOR CONCEALED TANK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall
. Land Patterns for Reflow Soldering.Recommended Reflow Soldering Conditions (For Lead Free) TYPE PID0703 PID0704 PID1204 PID1205 PID1207 PID1209 L(mm
.Features: 1.Magnetic Shielded surface mount inductor with high current rating. 2.Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in
Table of Contents Power Film Capacitors Power Film Capacitors Series Table Product Type Series Voltage Capacitance() Page DC-Link Power Film Capacitors Power Film Capacitors Power Film Capacitors Power
BC04 Module_antenna__ doc
http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 1 of 10 http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 2 of 10 http://www.infobluetooth.com TEL:+86-23-68798999
untitled
1....... 1 2... 3 2-1. 2-2. 2-3. 2-4. 2-5. 2-6. 2-7.5V.. 2-8. 3 4 4 4 5 5 6 6 3... 7 4..... 9 4-1. 4-2. 5.... 15 5-1.... 5-2.(Current Limit).. 5-3./(Constant Voltage/ Constant Current).. 5-4.... 15 16
FILTRON 1. DC AC AC 220V 50HZ 2. 1 1 1 3. / / / / 4. 1) 2 3 4 5 6 5. 6. 7. 8. 9. / 10. 1. 2. 3. 4. 5. 6. 7. DC AC FILTRON DC AC FILTRON DC 12V 12VDC D
2006 4 27 1 JY FILTRON 1. DC AC AC 220V 50HZ 2. 1 1 1 3. / / / / 4. 1) 2 3 4 5 6 5. 6. 7. 8. 9. / 10. 1. 2. 3. 4. 5. 6. 7. DC AC FILTRON DC AC FILTRON DC 12V 12VDC DC FILTRON AC 24VAC 24VAC AC 24VAC AC
Cube20S small, speedy, safe Eextremely modular Up to 64 modules per bus node Quick reaction time: up to 20 µs Cube20S A new Member of the Cube Family
small, speedy, safe Eextremely modular Up to 64 modules per bus de Quick reaction time: up to 20 µs A new Member of the Cube Family Murrelektronik s modular I/O system expands the field-tested Cube family
Microsoft PowerPoint - Ch5 The Bipolar Junction Transistor
O2005: Electronics The Bipolar Junction Transistor (BJT) 張大中 中央大學通訊工程系 [email protected] 中央大學通訊系張大中 Electronics, Neamen 3th Ed. 1 Bipolar Transistor Structures N P 17 10 N D 19 10 N D 15 10 中央大學通訊系張大中
2007 : 98 :0532-86894022.86891404 :0532-86880184 :266555 : 726 ( 4 41 ) :0552-4910760 :0552-4911181 :233006 1.... 3 2.... 3 2.1... 3 2.2... 4 3.... 4 3.1... 4 3.2... 9 3.3... 12 3.4... 16 3.5... 17 3.6...
HC20131_2010
Page: 1 of 8 Date: April 14, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:
HC50246_2009
Page: 1 of 7 Date: June 2, 2009 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:
HCD0174_2008
Reliability Laboratory Page: 1 of 5 Date: December 23, 2008 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified
Induction Heating and Melting Capacitors
General Information Induction Heating and Melting Capacitors pplication: The capacitors are applicable for indoor use and intended to be used for power factor correction in induction heating, melting,
Microsoft PowerPoint - ATF2015.ppt [相容模式]
![Microsoft PowerPoint - ATF2015.ppt [相容模式]](/thumbs/72/67494642.jpg "Microsoft PowerPoint - ATF2015.ppt [相容模式]")
Improving the Video Totalized Method of Stopwatch Calibration Samuel C.K. Ko, Aaron Y.K. Yan and Henry C.K. Ma The Government of Hong Kong Special Administrative Region (SCL) 31 Oct 2015 1 Contents Introduction
Chroma 61500/ bit / RMS RMS VA ()61500 DSP THD /61508/61507/61609/61608/ (61500 ) Chroma STEP PULSE : LISTLIST 100 AC DC
MODEL 61509/61508/61507/ 61609/61608/61607 PROGRAMMABLE AC POWER SOURCE MODEL 61509/61508/61507/ 61609/61608/61607 61509/61609: 6kVA 61508/61608: 4.5kVA 61507/61607: 3kVA : 0-175V/0-350V/Auto : DC, 15Hz-2kHz
使用说明书 DT4221 DT4222 数字万用表 DIGITAL MULTIMETER 2013 年 11 月第一版 DT4221A982-00(A981-00) 13-11H CN ...1...1...2...3...7 1 11 1.1... 11 1.2...12 1.3...16 1.4...17 2 19 2.1...19 2.2 /...20 2.3...22 2.4...25...
OA-253_H1～H4_OL.ai
WARNINGS Note: Read ALL the following BEFORE using this product. Follow all Guidelines at all times while using this product. CAUTION This warning indicates possibility of personal injury and material
THE INSTLLING INSTRUCTION FOR CONCELED TNK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall
Microsoft Word - 00 表紙1-L版-1.doc
IDX-OM-H005-L 初 版 :2003 年 7 月 改 定 :2005 年 7 月 使 用 说 明 书 冷 冻 式 空 气 干 燥 器 IDF1E-10 IDF2E-10 IDF3E-10 IDF3E-20 IDF4E-10 IDF4E-20 IDF6E-10 IDF6E-20 IDF8E-10 IDF8E-20 IDF11E-10 IDF11E-20 本 使 用 手 册 对 本 公 司 生
Microsoft Word - LR1122B-B.doc
UNISONIC TECHNOLOGIES CO., LTD LOW NOISE ma LDO REGULATOR DESCRIPTION The UTC is a typical LDO (linear regulator) with the features of High output voltage accuracy, low supply current, low ON-resistance,
iml88-0v C / 8W T Tube EVM - pplication Notes. IC Description The iml88 is a Three Terminal Current Controller (TTCC) for regulating the current flowi
iml88-0v C / 8W T Tube EVM - pplication Notes iml88 0V C 8W T Tube EVM pplication Notes Table of Content. IC Description.... Features.... Package and Pin Diagrams.... pplication Circuit.... PCB Layout
HC70044_2008
Page: 1 of 9 Date: July 10, 2008 KORENIX TECHNOLOGY CO., LTD. 9 F, NO. 100-1, MING-CHUAN RD., SHIN TIEN CITY, TAIPEI, TAIWAN The following merchandise was submitted and identified by the vendor as: Product
iml v C / 4W Down-Light EVM - pplication Notes. IC Description The iml8683 is a Three Terminal Current Controller (TTCC) for regulating the cur
iml8683-220v C / 4W Down-Light EVM - pplication Notes iml8683 220V C 4W Down Light EVM pplication Notes Table of Content. IC Description... 2 2. Features... 2 3. Package and Pin Diagrams... 2 4. pplication
Rotary Switch Catalogue
Rotary Switches RS300/400/500 Series Outline Our RS series embody the manufacturing history of our company. All series are sturdy and solid with high dependability designed for control units of plants,
Resistors - All Resistors - Chip Resistors
THICK FILM CHIP RESISTORS 特性 (Features) 輕薄短小 : 小型輕量, 大幅縮小 PC 板面積及重量 Small size and ligtweight with size range per int'l standard 裝配性佳 : 外觀均勻精確, 易於裝配 Highly stable in auto-placement surface mounting application
IEC A( ) B C D II
ICS 13.120 K 09 GB 4706.1 2005/IEC 60335-1:2004(Ed4.1) 1 Household and similar electrical appliances- Safety General requirements IEC60335-1 2004 Ed4.1,IDT 2005-08-26 2006-08-01 IEC 1 2 3 4 5 6 7 8 9 10
DR2010.doc
DR/2010 HACH 11-8-96-2 HACH. DR/2010, / UL E79852 CSA C22.223 LR 58275 VDE GS 1015-92 FCC"A" 15 : AMADOR CORP, HACH. EN50 011/CISPR 11 "B" (EMI)/89/336/EEC/EMC: AMADOR CORP, HACH.. EN50 082-1( )/89/226/EEC
Microsoft Word - LD5515_5V1.5A-DB-01 Demo Board Manual
Subject LD5515 Demo Board Model Name (5V/1.5A) Key Features Built-In Pump Express TM Operation Flyback topology with PSR Control Constant Voltage Constant Current High Efficiency with QR Operation (Meet
Current Sensing Chip Resistor
承認書 APPROVAL SHEET 廠商 : 客戶 : 麗智電子 ( 昆山 ) 有限公司 核準審核制作核準審核簽收 公 司 章 公 司 章 Liz Electronics (Kunshan) Co., LTD No. 989, Hanpu Road Kunshan City Jiangsu Province China Tel:0086-0512-57780531 Fax:0086-0512-57789581
iml v C / 0W EVM - pplication Notes. IC Description The iml8683 is a Three Terminal Current Controller (TTCC) for regulating the current flowin
iml8683-220v C / 0W EVM - pplication Notes iml8683 220V C 0W EVM pplication Notes Table of Content. IC Description... 2 2. Features... 2 3. Package and Pin Diagrams... 2 4. pplication Circuit... 3 5. PCB
TX-NR3030_BAS_Cs_ indd
TX-NR3030 http://www.onkyo.com/manual/txnr3030/adv/cs.html Cs 1 2 3 Speaker Cable 2 HDMI OUT HDMI IN HDMI OUT HDMI OUT HDMI OUT HDMI OUT 1 DIGITAL OPTICAL OUT AUDIO OUT TV 3 1 5 4 6 1 2 3 3 2 2 4 3 2 5
Pin Configurations Figure2. Pin Configuration of FS2012 (Top View) Table 1 Pin Description Pin Number Pin Name Description 1 GND 2 FB 3 SW Ground Pin.
Features Wide 3.6V to 32V Input Voltage Range Output Adjustable from 0.8V to 30V Maximum Duty Cycle 100% Minimum Drop Out 0.6V Fixed 300KHz Switching Frequency 12A Constant Output Current Capability Internal
HC70245_2008
Reliability Laboratory Page: 1 of 6 Date: September 5, 2008 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified
untitled
EDM12864-GR 1 24 1. ----------------------------------------------------3 2. ----------------------------------------------------3 3. ----------------------------------------------------3 4. -------------------------------------------------------6
01CP-WX3030WNetc_CO_ENG.indd
Data Video Projector User s Manual (Concise) ModelS: 8928A/8930A/8931WA/ 8933W Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please
Thin Film Precision Temperature Chip Resistor TPT 2013.xls
FEATURE Thin Film Passivity NiCr Resistor Very Tight Tolerance from ±0.01%. Extremely Low TCR from ±5ppm/ Wide R-Value Range Rated : 1/32W ~ 1W (0402 ~2512) Applications Medical Equipment Testing / Measurement
LH_Series_Rev2014.pdf
REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check
1-S40A...-1 DAT00452 V.005
1. 1-S40A -1 Technical data: DATA SHEET Technical data Unit 1-S40A -1 OIML R60 D1 C3 Emax Max. capacity Kg 50,100,200,500 50,100,200,500 t 1, 2, 3, 5 1, 2, 3, 5 vmin % of Cn 0.0286 0.0120 Sensitivity mv/v
Microsoft Word - HC20138_2010.doc
Page: 1 of 7 Date: April 26, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:
LSC操作说明
1 C H R I S T A L P H A 1-4 LSC 型 Part. No. 102041 A L P H A 2-4 LSC 型 Part. No. 10204 冷 冻 干 燥 机 操 作 说 明 新 研 制 的 LSC-8 控 制 器, 具 备 图 形 显 示 功 能, 能 以 数 据 表 形 式 显 示 参 数, 并 可 选 配 控 制 软 件 LSC-8 1/4 VGA 大 屏 幕
目录 2
Safety Protection Catalogue 2012/2013 Industrial Plug & Socket MAXTRIC circuit breaker Working with the world s electric specialist together @ 2 Technical Data Rated Voltage: AC 24, 42, 110, 127, 220,
KDC-U5049 KDC-U4049 Made for ipod, and Made for iphone mean that an electronic accessory has been designed to connect specifically to ipod, or iphone,
KDC-U5049 KDC-U4049 Made for ipod, and Made for iphone mean that an electronic accessory has been designed to connect specifically to ipod, or iphone, respectively, and has been certified by the developer
Wire Wound Ceramic Chip Inductor 繞線式陶瓷晶片大电流電感 HPWS Series for High Frequency HPWS 系列適用於高頻 INTRODUCTION 產品介紹 The HPWS is the chip inductors of a wire w
INTRODUCTION 產品介紹 The HPWS is the chip inductors of a wire wound type widely used in the communication applications, such as cellular phones, television tuners, radios, and other electronic devices. The
MODEL 62000H SERIES 5KW / 10KW / 15KW 0 ~ 375A 0 ~ 1000V/2000V( ) : 200/220Vac, 380/400Vac, 440/480Vac 3U/15KW / & 150KW / ( 10 ms ~ 99 hours)
MODEL 62000H SERIES 5KW / 10KW / 15KW 0 ~ 375A 0 ~ 1000V/2000V( ) : 200/220Vac, 380/400Vac, 440/480Vac 3U/15KW / &150KW / ( 10 ms ~ 99 hours) 10 100 / PROGRAMMABLE DC POWER SUPPLY MODEL 62000H SERIES USB
<4D F736F F D20436F696C20B2FAC6B7C4BFC2BCD5FDCABDB0E62E646F63>
POWER INDUCTOR 功率電感 LQH SERIES Features High Q values Low resistance Ordering Code 特性 LQH 1210 4R7 高 Q 值. 1 2 3 4 低阻抗. 1.Type 類型 2.Dimension 尺寸 3. Inductance 電感值 4.Tolerance 公差 M=±20% K=±10% J=±5% Dimensions
Sosen SS-50R-36 LED Driver Spec Sheet
SPECIFICATION 50W LED DRIVER Issued date: January 20, 2013 REV: V1.0 Model: SS-50R Description: 50W AC to DC LED DRIVER Customer: Customer Approval Signature SHENZHEN SOSEN ELECTRONICS CO LTD WRITTEN CHECKED
untitled
0000137925 REV 1.0 ... 4... 5... 6... 7... 8... 9... 11... 12... 13... 14... 15... 17... 18... 20... 22 ( 1)... 25... 26 ( 2)... 28 \ 1 ( 2A)... 29 \ 2 ( 2B)... 30 SSR ( 2C)... 31 \ ( 2D)... 32 \ ( 3A)...
蓄电池维护指南新OK.PDF
DL/T 724-2000 Specification of operation and maintenance of battery DC power supply Equipment for electric power system ( ) GB/T 2900.11-1988 GB/T 2900.33-993 DL/T 459-2000 GB/T 2900.11 GB/T 2900.33 3.1
ESD.xls
Transient Suppressor Reverse Reverse ESD Capacitance Stand-off Beakdown Package Contact/Air Channel Circuit Diagram Pin Configuration Remark CMTLCP020CR35BFE CMTLDF02CR35AFE CMTLDF02CR50BLE CSP020 (pf)
a) Rating and Characteristics Disk Type 05D *Rated Rated Peak Varistor Clamping Typ. cap. Series Part No. Rated Voltage Energy Rated Power Current(8 2
ZR NR Series (Radial type) Disk type general use ZR type (Low voltage) and NR type (Medium/High Voltage) are for protection of electronics and control eqiupments from surge and noise. 1. Features Superior
r_09hr_practical_guide_kor.pdf
PRACTICAL GUIDE TO THE EDIROL R-09HR 3 4 PRACTICAL GUIDE TO THE EDIROL R-09HR 5 Situation 1 6 1 2 3 PRACTICAL GUIDE TO THE EDIROL R-09HR WAV MP3 WAV 24 bit/96 khz WAV 16 bit/44.1 khz MP3 128 kbps/44.1
68369 (ppp quickstart guide)
Printed in USA 04/02 P/N 68369 rev. B PresencePLUS Pro PC PresencePLUS Pro PresencePLUS Pro CD Pass/Fails page 2 1 1. C-PPCAM 2. PPC.. PPCAMPPCTL 3. DB9D.. STPX.. STP.. 01 Trigger Ready Power 02 03 TRIGGER
Logitech Wireless Combo MK45 English
Logitech Wireless Combo MK45 Setup Guide Logitech Wireless Combo MK45 English................................................................................... 7..........................................
untitled
R ( ) .5..5 2.. 2.. 2 4 5 7 7 7 7 7 8 8 8 0 0 2 4 5 5 5 7 8 8 PC 0 安全注意事項及緊急處理方法 請務必遵守 警告 發生異常或故障時 應立即停止使用 拔 下電源插頭 恐會導致冒煙 起火 觸 電 異常或故障事例 即使接上電源開關有時也不會運轉 插拔電源線時 有時通電有時不通電 運轉中 有燒焦味或異音 本體部分變形或異常發熱 請立即連絡服務站進行檢查及修理
HOIE WITH PREISION is also the Easy choice! Easy-Laser Easy-Laser
E915 1 HOIE WITH PREISION is also the Easy choice! Easy-Laser Easy-Laser SIMPLE ND EFFETIVE Easy-Laser D23 Easy-Laser E5 TEHNIL DT System Relative humidity 10 95% (complete system) 12.1 kg [26.7 lbs] arrying
untitled
0755-82134672 Macroblock MBI6655 1 LED Small Outline Transistor 1A 3 LED 350mA 12V97% 6~36 Hysteretic PFM 0.3Ω GSB: SOT-89-5L (Start-Up) (OCP) (TP) LED Small Outline Package 5 MBI6655 LED / 5 LED MBI6655
CANVIO_AEROCAST_CS_EN.indd
简 体 中 文...2 English...4 SC5151-A0 简 体 中 文 步 骤 2: 了 解 您 的 CANVIO AeroCast CANVIO AeroCast 无 线 移 动 硬 盘 快 速 入 门 指 南 欢 迎 并 感 谢 您 选 择 TOSHIBA 产 品 有 关 您 的 TOSHIBA 产 品 的 详 情, 请 参 阅 包 含 更 多 信 息 的 用 户 手 册 () 安
Microsoft Word - AP1515V02
Document No. Rev.: V0.20 Page: 1 of 9 Revision History Rev. DRN # History Initiator Effective Date V01 V02 Initial document 黃宗文 Add second package description 葉宗榮 2014/05/15 2015/09/08 Initiator: 雷晨妤 (DCC)
User’s Manual
SNAP 500 打 印 机 用 户 手 册 1 用 户 手 册 SNAP TM 500 打 印 机 2015 年 8 月 24 日 AVERY DENNISON Manual Edition 2.5 2 SNAP 500 打 印 机 用 户 手 册 WARNING This device complies with Part 15 of the FCC Rules. Operation is subject
Microsoft Word - P SDV series.DOC
片式压敏电阻器 SDV 系列 Chip SDV Series Operating Temp. : -55 ~ +125 特征 SMD 结构适合高密度安装 优异的限压比, 响应时间短 (
Microsoft PowerPoint - CH 04 Techniques of Circuit Analysis
Chap. 4 Techniques of Circuit Analysis Contents 4.1 Terminology 4.2 Introduction to the Node-Voltage Method 4.3 The Node-Voltage Method and Dependent Sources 4.4 The Node-Voltage Method: Some Special Cases
2015年4月11日雅思阅读预测机经（新东方版）
剑 桥 雅 思 10 第 一 时 间 解 析 阅 读 部 分 1 剑 桥 雅 思 10 整 体 内 容 统 计 2 剑 桥 雅 思 10 话 题 类 型 从 以 上 统 计 可 以 看 出, 雅 思 阅 读 的 考 试 话 题 一 直 广 泛 多 样 而 题 型 则 稳 中 有 变 以 剑 桥 10 的 test 4 为 例 出 现 的 三 篇 文 章 分 别 是 自 然 类, 心 理 研 究 类,
Gerotor Motors Series Dimensions A,B C T L L G1/2 M G1/ A 4 C H4 E
Gerotor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 5 5 1 0 1 0 3 3 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 25mm Keyed (A) 1.0' 6T Spline
Stability for Op Amps
R ISO CF Tim Green Electrical Engineering R ISO CF CF Output Pin Compensation R ISO Tina SPICE Tina SPICE V OUT V IN AC Tina SPICE (Transient Real World Stability Test)23 R O /40V OPA452 (piezo actuator)
s 2002
s 2002 List of all Catalogs from Electrical Installation Technology (ET) Electrical Installation Catalogs Technology ( / ) Miniature Circuit-Breakers, Residual Current Operated Circuit- Breakers and Modular
(baking powder) 1 ( ) ( ) 1 10g g (two level design, D-optimal) 32 1/2 fraction Two Level Fractional Factorial Design D-Optimal D
( ) 4 1 1 1 145 1 110 1 (baking powder) 1 ( ) ( ) 1 10g 1 1 2.5g 1 1 1 1 60 10 (two level design, D-optimal) 32 1/2 fraction Two Level Fractional Factorial Design D-Optimal Design 1. 60 120 2. 3. 40 10
Digital-Multimeter
MT-2018 Protective Function Analog Multimeter User s Manual 1 st Edition, 2014 2014 Copyright by Prokit s Industries Co., Ltd. INTRODUCTION This Multi-meter is an accurate, safe, battery operated, rear
www. chromaate. com Chroma H I-V (MPPT) / 6630/ /61500/ / Chroma
Power Electronics Testings www.chromaate.com Turn-key Solutions Provider www. chromaate. com Chroma 1. 62000H I-V (MPPT) 4 5 9 3 2. / 6630/66200 3. 6500/61500/61600 4. / 63800 Chroma Model 62000H 62000H
A
本 章 描 述 了 AU400 自 动 生 化 分 析 仪 的 安 装 使 用 环 境 标 准 附 件 注 意 事 项 及 其 他 相 关 的 要 求 请 在 使 用 仪 器 前 阅 读 此 部 分 为 安 全 高 效 的 使 用 自 动 生 化 分 析 仪 必 须 遵 守 使 用 须 知 目 录 1. 安 全 事 项 A-02 2. 使 用 须 知 A-04 3. 安 装 环 境 A-05 4.
甄試報告1125.PDF
LabVIEW LabVIEW Laboratory Virtual Instrument Engineering Workbench G LabVIEW DAQ LabVIEW LabVIEW LabVIEW LabVIEW ph LabVIEW DAQ LabVIEW PZT LabVIEW / =2 10-8 1 LabVIEW DAQ LabVIEW DAQ DAQ LabVIEW DAQ
历经50多年考验的高科技仪表和探头 Swema 是一家瑞典公司，从1944年起它便从事于高品质仪表和感测器的设计与制造
NEWSwemaAir 300. 1 2 NEWSwemaAir 300 3 4 SwemaAir 300 SWA03 SWA 03: 1V/m/s, 10 mv/ C / SWA 31: 100 mv/m/s, 10 mv/ C / SWA 10, 07: 1 mv / Pa, 100mV / m/s SWA 25, 53, SWT 315 /215 / 221: 10mV/ C SwemaFlow
History 97 97Universal Universal 98Universal 98Magnetek Magnetek ighting Group Universal Technologies ighting Energy Saving Incorporation
00V EECTROIC BAAST History 97 97Universal Universal 98Universal 98Magnetek 997 00Magnetek ighting Group Universal Technologies ighting 999 00Energy Saving Incorporation P. Company Profile Universal ighting
Microsoft Word - VA REV.A.doc
Data Sheet Customer: Product : Multilayer Chip Varistor - VA Series Size: 0402/0405/0508/0603/0612/0805/1206/1210/1812 /2220 Issued Date: 22-Jan-11 Edition : REV.A VIKING TECH CORPORATION 光頡科技股份有限公司 No.70,
Manual Pulse Generator Catalogue
Manual Pulse Generator RE45T series Outline RE45T/V series are compact optical manual pulse generators that allow accurate and smooth manual motion for NC machine tools, industrial machines etc. Features
EC-W1035RL說明書.cdr
電壓 AC 110V/60Hz 消耗功率 1200W 額定電流 9.5A 吸入功率 350W 淨重 約5. 3 k g 外型尺寸 W420 X D260 X H350(mm) 生產國別 中國 警告 為了避免火災或是電擊的危險 請勿讓本機暴露於雨中或濕氣中 電源線請確實插牢於電源插座內 以免因未插牢而引起插頭產生高熱 而造成意外 目錄 1 2 各部名稱 8 清潔集塵桶 3 本機特點 8 清潔過濾機芯
Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E
Gerolor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 12 12 1 1 0 0 2 2 31 31 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 2mm Keyed (A) 1.0'
接线端子--Connectors规格书.doc
Connectors with/without wire protector high-temperature resistant* High grade flexible strips Resistant to temperature up to 100 C (to 140 C) Multiple approvals Raised base Available with or without wire
TSI 8384/8385/8386 Manual
8384/85/86 TSI/ VELOCITY FLOWRATE PRESSURE zero TEMP HUMIDITY SAMPLE options NEXT TEST clear STATISTICS review data SAMPLE INTERVAL HEAT FLOW THERMAL PITOT ACTUAL STANDARD ENTER ON/OFF 7 1 8 TEL:(02)26018201
untitled
力 2 說 2 DS2DB 列 說 Dimamotor 行 不 若 料 聯 力 2 說 1. ---------------------------------------------------------------------------2 2. -------------------------------------------------------------------- 2 3.
FM1935X智能非接触读写器芯片
FM33A0xx MCU 2017. 05 2.0 1 (http://www.fmsh.com/) 2.0 2 ... 3 1... 4 1.1... 4 1.2... 4 1.3... 5 1.3.1... 5 1.3.2... 5 1.4... 8 1.4.1 LQFP100... 8 1.4.2 LQFP80... 9 1.4.3... 9 2... 15 2.1 LQFP100... 15
SRD-N/TRD-N DIMENSIONS 規格尺寸 SRD-N SRD-N + PF08A + FH- 2 UNIT :mm TRD-N TRD-N + 8PFA 101 SRD-N/TRD-N POWER OPERATION 操作方式 4
STON STAR-DELTA TIMER SRD-N/TRD-N 馬達啟動器 SRD-N ORDERING INFORMATION 訂購說明 TRD-N Ex S RDN 0S A220 CE Approved. STON or P&B RELAY inside. MOTOROLA IC inside. Standard change time is 0.1Seconds. CE 認證 內部採用美國第一品牌
Abstract Due to the improving of living standards, people gradually seek lighting quality from capacityto quality. And color temperature is the important subject of it. According to the research from aboard,
untitled
雙 輸 入 酸 鹼 度 氧 化 還 原 電 位 PC3200 操 微 電 腦 控 制 器 作 ph MV 7.00 1000 手 ATC 25.0 MTC 25.0 冊 1 錄...... 參...... 說.. 參.. 參.. 4.. 4.1.. 4.2 說 4.3 說 4.4 說 4.5 量.. 5.1 量 流.. 5.2 參 數.. 5.3.. 5.4 參 數 復.. 5.5 參 數 復..