OVERLOCK STITCH 超高速安全缝包缝机 Ultra high speed overlock / safety stitch machine 2

Size: px

Start display at page:

Download "OVERLOCK STITCH 超高速安全缝包缝机 Ultra high speed overlock / safety stitch machine 2"

灿桐
5 years ago
Views:

2 OVERLOCK STITCH 超高速安全缝包缝机 Ultra high speed overlock / safety stitch machine 2

3 747 - K 线数 Thread numbers M DT 送具型式 Feed dog type 配件 Device 包边宽度 Overedge width 机种别 Model K 直针式针棒 Direct type needle bar KD 直驱式直针式针棒 Direct drive direct type needle bar FS 筒型 Cylinder bed type UX 牛仔布车缝 For jeans sewing DFT 前综合送 Front top-feed mechanism DRT 后综合送 Rear top-feed mechanism 缝合方式 Sewing types 504 车缝布料 Sewing fabric F 轻薄布料 Fine weight fabric L 薄布料 Light weight fabric M 中厚布料 Medium weight fabric H 厚布料 Heavy weight fabric X 特厚布料 Extra heavy weight fabric

700K/KD SERIES FEATURES 高效节能直驱专利设计 (700KD) - 机身一体化设计 - 内建微型伺服马达, 传动敏捷, 安静避震 ; 无段可调速设计 - 内藏式定位器, 免换手轮 - 具自动定针功能 -

machine frame design. - Built-in servo motor. Fast responsiveness, quiet, and low vibration. Easy speed setting.

- High efficiency, energy saving, intergrated electrical system.

needle bar mechanism - Dust free and oil-leakage-free are due to entirely sealed needle bar section design.

No driving loss of connecting-rod-drive needle bar system.

looper mechanisms are applied active oil supply and entirely sealed vacuum oil return system.

专利双刮双唇式送具防漏设计除双刮板外又新增双唇式刮板, 阻油防油效果较原有双刮板设计效果更佳 Patented feed dog mechanism oil proof system New double-lip type

4 700K/KD SERIES FEATURES 高效节能直驱专利设计 (700KD) - 机身一体化设计 - 内建微型伺服马达, 传动敏捷, 安静避震 ; 无段可调速设计 - 内藏式定位器, 免换手轮 - 具自动定针功能 - 高效伺服节省电费, 整合电控辅件, 提高缝制效益 Patented high efficient & energy-saving direct-drive design (700KD) - Integrated machine frame design. - Built-in servo motor. Fast responsiveness, quiet, and low vibration. Easy speed setting. - Built-in synchronizer, hand wheel is free of obstacle. - Needle position function. - High efficiency, energy saving, intergrated electrical system. 密封式直接传动针棒专利机构 - 密闭针棒室, 防尘防脏污渗入, 避免漏油 - 缝制动能沿针棒运动方向直接传达, 有效提升缝纫高速化及耐久性 ; 避免连杆式针棒之传动耗损 Sealed type direct drive needle bar mechanism - Dust free and oil-leakage-free are due to entirely sealed needle bar section design. - Direct drive needle bar system leads to high speed and long durability. No driving loss of connecting-rod-drive needle bar system. 全新强制供油 / 回油及滤油系统针棒, 上勾针机构采用强制给油及全密闭式真空回油机构, 完全排除以油线供油或滴落式供油产生问题 Active lubrication system Needle bar and upper looper mechanisms are applied active oil supply and entirely sealed vacuum oil return system. The new system exceeds the traditional oil supply of rope type and dropping type. 专利双刮双唇式送具防漏设计除双刮板外又新增双唇式刮板, 阻油防油效果较原有双刮板设计效果更佳 Patented feed dog mechanism oil proof system New double-lip type wiper is added to support the original double wiper. Oil proof function is upgraded. 直接传动式送具机构直接传动可防止差动输送过度, 缝纫更准确顺畅, 不用调整差动齿, 避免连杆式送具之传动耗损 Direct drive feeding mechanism Direct drive mechanism prevents overdoing of differential feeding. No need to adjust the differential feed dog. No drive loss of connecting rod and type feeding mechanism. 4

新型切刀机构刀座轴心低式设计, 可防止面料回推现象, 使面料切断时不会产生卷边现象 New fabric trimmer mechanism Low axis knife holder prevents cloth rolls up after trimming.

artistic and user friendly. 可选配专用送具车缝超薄布料例如 :D201 标准品齿距为 1.6mm ; D201A 选购品齿距为 0.8mm ; D201B 选购品齿距为 1.

Needle bar height adjustment without opening machine. - Lower looper holder fine tune mechanism.

- 5 cm height sewing area offers better cloth movement.

5 新型切刀机构刀座轴心低式设计, 可防止面料回推现象, 使面料切断时不会产生卷边现象 New fabric trimmer mechanism Low axis knife holder prevents cloth rolls up after trimming. 专利一体化内藏式照明 ( 选购 ) LED 灯内藏一体化设计, 穿线目视操作方便, 整体美观 Patented integrated built-in lighting (Optional) - Integrated built-in LED light design is artistic and user friendly. 可选配专用送具车缝超薄布料例如 :D201 标准品齿距为 1.6mm ; D201A 选购品齿距为 0.8mm ; D201B 选购品齿距为 1.0mm Feed dog for extra light weight fabric (Optional) E.g.: D201(standard):Teeth spacing 1.6mm ; D201A(optional):Teeth spacing 0.8mm ; D201B(optional):Teeth spacing 1.0mm 可选配短押具舌车缝厚布料或长押具舌车缝薄布料, 让车缝线迹更加完美 Optional presser foot fingers for better sewing performance: short finger for heavy fabric, long finger for light fabric. 更多便于使用的特点... - 免开盖针高调整, 操作便利 - 下勾针座前后微调机构, 维修省时简易 - 环缝微调机构, 开后盖调粗细针, 迅速省时 - 针板出线槽设计, 包缝 / 环缝出线线圈更柔软完美 - 车头高度达 5cm 使进出布更加方便 More user friendly features: - Needle bar height adjustment without opening machine. - Lower looper holder fine tune mechanism. - Chainstitch fine tune mechanism: Open the rare cover to adjust stitch length easily. - Needle plate thread groove leads to perfect loop. - 5 cm height sewing area offers better cloth movement. 电眼吸风集尘控制 (ET 组 )(700KD 选配 ) - 节省空气, 降低空气使用量 40% 以上 - 切线时吸风, 其余时间无动作, 大大降低因吸风产生之噪音 - 车缝薄布时不会吸入切到, 不用拖长缝线, 降低缝线耗量提升工作效率 - 节能控制使用简单 Electric-eye controlled waste vacuuming system(et Device) (700KD Optional) - Save energy. Reduce air compressor s loading to 40% or more. - Air suction is activated only when trimming thereby reduce the noise of air suction effectively. - Does not suction light cloth into the suction trimmer. No need to overrun the seaming for suction trimming. Save thread consumption and increase operation efficiency. - Simple, easy, and user friendly. 5

K1 737K-504M2-04 1 3-4 I - 0.7-2 3.6 6 DCX27#11 7500 737KD-504M2-04 1 3-4 I - 0.7-2 3.6 6 DCX27#11 7500 一般包缝适用于特薄至中厚布料之包缝 GENERAL SEAMING For regular seaming on light to medium fabric..vt.vt/csa.

6 K1 737K-504M I DCX27# KD-504M I DCX27# 一般包缝适用于特薄至中厚布料之包缝 GENERAL SEAMING For regular seaming on light to medium fabric..vt.vt/csa.vt/csb.vt/tub 2/TBK-1 K2 737K-504F I DCX27# KD-504F I DCX27# 一般包缝适用于特薄至薄布料之包缝例如 : 丝绸类布料 GENERAL SEAMING For regular seaming on light to extra light knit fabric. Eg : Silk fabric.vt.vt/csa.vt/csb.vt/tub 2/TBK-1 6

K3 737 737K-504F2-02 1 3-2 I - 0.7-2 3.6 0.

5 DCX27#9 7500 细包缝 ( 荷叶边 ) 适用于特薄布料之卷边细包缝例如 : 手帕, 礼服等 FING EDGING (falbala edging) For fine edging on extra light

vt/tub 2/TBK-1 K4 737K-504F1-15 1 3-1.5 I - 0.7-2 3.6 0.

7 K K-504F I DCX27# KD-504F I DCX27# 细包缝 ( 荷叶边 ) 适用于特薄布料之卷边细包缝例如 : 手帕, 礼服等 FING EDGING (falbala edging) For fine edging on extra light knit fabric. The presser foot is with fine folding function. Eg : Handkerchief & dress...etc..vt.vt/csa.vt/csb.vt/tub 2/TBK-1 K4 737K-504F I DCX27# KD-504F I DCX27# 细包缝 ( 手帕边包缝 ) 适用于特薄布料之卷边细包缝例如 : 丝绸类布料之手帕, 礼服等 FING EDGING (handkerchief edging) For fine edging on extra light knit fabric. The presser foot is with fine folding function. Eg : Handkerchief & dress of silk fabric etc..vt.vt/csa.vt/csb.vt/tub 2/TBK-1 7

6 6 DCX27#9 7500 细包缝 ( 手帕边包缝 ) 适用于薄至中厚布料之细包缝例如 : 手帕, 礼服等 FING EDGING (handkerchief edging) For fine edging on light to medium fabric.

8 K5 737K-504M I DCX27# KD-504M I DCX27# 细包缝 ( 手帕边包缝 ) 适用于薄至中厚布料之细包缝例如 : 手帕, 礼服等 FING EDGING (handkerchief edging) For fine edging on light to medium fabric. Eg : Handkerchief & dress etc..vt.vt/csa.vt/csb.vt/tub 2/TBK-1 K6 737K-505F I DCX27# KD-505F I DCX27# 拷下摆用于特薄至薄布料之针织 T 恤, 内衣等之下摆或袖口拷缝 BLIND HEMMING For hemming sleeves and bottoms of T-shirts or underwear etc. Applicable for light to extra light fabric..vt.vt/csa.vt/csb.vt/tub 2/TBK-1 8

K7 737 737K-504M2-04/LFC-3 1 3-4 I - 0.7-2 3.

6 6 DCX27#11 7000 松紧带车缝利用齿轮调整控制鬆紧带之松紧程度, 可准确进行松紧带之包缝, 适用于泳衣, 内衣裤或运动服饰之松紧带包缝. 注 : 1.

若需其他规格请下单时特别注明 P217-3 (2mm- 20mm) P218-3 (2mm~30mm) P219-3 (2mm~35mm) ELASTIC

box. For attaching on swimwear, underwear or sportswear etc. Remark : 1.

Available size as below : P217-3 (2mm- 20mm), P218-3 (2mm~30mm), P219-3 (2mm~35mm).

6 6 DCX27#11 7500 737KD-504M2-04/TR 1 3-4 I - 0.7-2 3.

9 K K-504M2-04/LFC I DCX27# KD-504M2-04/LFC I DCX27# 松紧带车缝利用齿轮调整控制鬆紧带之松紧程度, 可准确进行松紧带之包缝, 适用于泳衣, 内衣裤或运动服饰之松紧带包缝. 注 : 1. 配标准押具 P216-3 (2mm ~13mm) 2. 若需其他规格请下单时特别注明 P217-3 (2mm- 20mm) P218-3 (2mm~30mm) P219-3 (2mm~35mm) ELASTIC ATTACHING Elastic tap feeding : the length and the tension are controlled by gear box. For attaching on swimwear, underwear or sportswear etc. Remark : 1. Standard presser foot P216-3 (2mm ~13mm) 2. Available size as below : P217-3 (2mm- 20mm), P218-3 (2mm~30mm), P219-3 (2mm~35mm).LF-A.EC/LF-A.LS.EC/LS.EC 2/TBK-1 K8 737K-504M2-04/TR I DCX27# KD-504M2-04/TR I DCX27# 简易松紧带车缝 ( 浴帽车缝 ) 利用弹簧片调整, 控制松紧带之鬆紧程度, 可简易进行松紧带之包缝, 适用于不织布, 塑胶布等浴帽或医疗用衣物例如 : 浴帽, 医疗用衣物等 SIMPLE ELASTIC ATTACHING For attaching elastic tape on non-woven or plastic cloth. The tension is controlled by spring. Eg : Shower cap, medical clothing etc..lf-a.ec/lf-a.ls.ec/ls.ec 2/TBK-1 9

K9 737K-WR/LFC-3 1 3 - - I - - - - DCX27#11 7500 737KD-WR/LFC-3 1 3 - - I - - - - DCX27#11 7500 管状布条车缝将针织布条拷边车缝后再反条成管形,

spaghetti tube for swimwear, nightgown etc Remark : Standard folder specification: tape width is 22mm (7/8 ) and the

6 6 DCX27#11 7500 737K-504M3-05 1 3-5 I - 0.7-2 3.6 6 DCX27#11 7500 737KD-504M3-04 1 3-4 I - 0.7-2 3.6 6 DCX27#11 7500 737KD-504M3-05 1 3-5 I - 0.

10 K9 737K-WR/LFC I DCX27# KD-WR/LFC I DCX27# 管状布条车缝将针织布条拷边车缝后再反条成管形, 适用于各种泳装, 睡衣或韵律服等管状肩带注 : 标准喇叭之布条入布宽度 22mm(7/8") 成型之管状布条直径为 5mm SPAGHETTI SEWING To sew knit fabric tape and turn over it into spaghetti tube for swimwear, nightgown etc Remark : Standard folder specification: tape width is 22mm (7/8 ) and the finished tube size is about 5mm in diameter..fg 2/TBK-1 K10 737K-504M I DCX27# K-504M I DCX27# KD-504M I DCX27# KD-504M I DCX27# 一般包缝适用于薄布料之包缝 ( 单排送具 ) GENERAL SEAMING For light fabric over seaming. (single row feed dog).vt.vt/csa.vt/csb.vt/tub 2/TBK-1 10

K11 737 737K-504M3-05/PZ 1 3-5 I - 0.7-2 3.6 6 DCX27#18 7500 737KD-504M3-05/PZ 1 3-5 I - 0.

6 6 DCX27#18 7500 拉链包缝适用于薄布料之拉链包缝, 可将拉链与衣身裁片同时包缝 ZIP SEAMING For regular seaming for zipper

6 6 DCX27#11 7500 737KD-504M5-04/BK 1 3-4 I - 0.

提升车缝效率与品质 BACK LATCHING SEAMING To prevent seam looseness, turn over the thread and then

11 K K-504M3-05/PZ I DCX27# KD-504M3-05/PZ I DCX27# 拉链包缝适用于薄布料之拉链包缝, 可将拉链与衣身裁片同时包缝 ZIP SEAMING For regular seaming for zipper with light fabric..vt.vt/csa.vt/csb.vt/tub 2/TBK-1 K12 737K-504M5-04/BK I DCX27# KD-504M5-04/BK I DCX27# 线头包缝将线头包入车缝线内, 可防止缝合之开口处缝线脱落, 适用于内衣裤, 运动服之袖口及侧边缝合注 : 此机型建议搭配伺服马达, 使用定针功能, 提升车缝效率与品质 BACK LATCHING SEAMING To prevent seam looseness, turn over the thread and then insert into overlock seaming at the beginning of sewing. For sleeve and sideway sewing of underwear, sportswear etc. Remark : To equip with servo motor for needle position function is optional and recommended. 2/TBK-1 11

K13 747K-514M2-24 2 4 2 4 I 6 0.7-2 3.6 5.5 DCX27#11 7500 747K-514M2-25 2 4 2 5 I 7 0.7-2 3.6 5.5 DCX27#11 7500 747KD-514M2-24 2 4 2 4 I 6 0.7-2 3.6 5.5 DCX27#11 7500 747KD-514M2-25 2 4 2 5 I 7 0.

CT/TUB 2/TBK-1 747K-512M1-25 2 4 2 5 I 7 0.7-2 3.6 5.5 DCX27#11 7500 747K-512M1-34 2 4 3 4 I 7 0.7-2 3.6 5.5 DCX27#11 7500 747KD-512M1-25 2 4 2 5 I 7 0.7-2 3.6 5.5 DCX27#11 7500 747KD-512M1-34 2 4 3 4 I 7 0.

12 K13 747K-514M I DCX27# K-514M I DCX27# KD-514M I DCX27# KD-514M I DCX27# 一般包缝适用于薄至中厚布料之包缝 GENERAL SEAMING For regular seaming on light to medium fabric. K14.VT.CT.VT/CSA.CT/CSA.VT/CSB.CT/CSB.VT/TUB.CT/TUB 2/TBK-1 747K-512M I DCX27# K-512M I DCX27# KD-512M I DCX27# KD-512M I DCX27# 一般包缝 ( 假五线 ) 用于薄至中厚布料之一般缝合 GENERAL SEAMING (MOCK 516 SEAMING) For regular seaming on light to medium fabric..vt.ct.vt/csa.ct/csa.vt/csb.ct/csb.vt/tub.ct/tub 2/TBK-1 12

K15 747 747K-514F1-24 2 4 2 4 I 6 0.7-2 3.6 5.5 DCX27#11 7500 747KD-514F1-24 2 4 2 4 I 6 0.7-2 3.6 5.5 DCX27#11 7500 一般包缝适用于特薄至薄布料之包缝例如 : 针织类軟薄布料 GENERAL SEAMING For regular seaming on light to extra light knit fabric.

7-2 3.6 6 DCX27#11 7000 747KD-514M2-25/LFC-3 2 4 2 5 I 7 0.7-2 3.6 6 DCX27#11 7000 一般包缝利用齿轮调整控制鬆紧带之鬆紧程度, 可准确进行鬆紧带之包缝, 适用于泳衣, 内衣裤或运动服饰之鬆紧带包缝注 : 1. 配标准押具 P216-4 (2mm ~13mm) 2.

13 K K-514F I DCX27# KD-514F I DCX27# 一般包缝适用于特薄至薄布料之包缝例如 : 针织类軟薄布料 GENERAL SEAMING For regular seaming on light to extra light knit fabric. Eg : Light knit fabric. K16.VT.CT.VT/CSA.CT/CSA.VT/CSB.CT/CSB.VT/TUB.CT/TUB 2/TBK-1 747K-514M2-24/LFC I DCX27# K-514M2-25/LFC I DCX27# KD-514M2-24/LFC I DCX27# KD-514M2-25/LFC I DCX27# 一般包缝利用齿轮调整控制鬆紧带之鬆紧程度, 可准确进行鬆紧带之包缝, 适用于泳衣, 内衣裤或运动服饰之鬆紧带包缝注 : 1. 配标准押具 P216-4 (2mm ~13mm) 2. 若需其他规格请下单时特别注明 P217-4 (2mm~20mm), P218-4 (2mm~30mm), P219-4 (2mm~35mm) GENERAL SEAMING Elastic tap feeding: the length and the tension are controlled by gear box. For attaching on swimwear, underwear or sportswear etc. Remark : 1. Standard presser foot P216-4 (2mm ~13mm) 2. Available size as below: P217-4 (2mm~20mm), P218-4(2mm~30mm), P219-4(2mm~35mm).LF-A.EC/LF-A.LS.EC/LS.EC 2/TBK-1 13

K17 747K-514M2-24/TG 2 4 2 4 I 6 0.7-2 3.

6 6 DCX27#11 7500 747KD-514M2-24/TG 2 4 2 4 I 6 0.7-2 3.

6 6 DCX27#11 7500 肩带包缝适用于针织衣服如 T 恤, 毛衣等之肩部多车一条织带, 可防止衣服肩部变形 TAPE INSERTING For sewing a

, to prevent abnormal stretching..lf-a.ec/lf-a.ls.ec/ls.

14 K17 747K-514M2-24/TG I DCX27# K-514M2-25/TG I DCX27# KD-514M2-24/TG I DCX27# KD-514M2-25/TG I DCX27# 肩带包缝适用于针织衣服如 T 恤, 毛衣等之肩部多车一条织带, 可防止衣服肩部变形 TAPE INSERTING For sewing a woven tape onto the shoulder of knitwear such as T-shirt or sweater etc., to prevent abnormal stretching..lf-a.ec/lf-a.ls.ec/ls.ec 2/TBK-1 K18 747K-514M I DCX27# KD-514M I DCX27# 一般包缝适用于薄至中厚布料之包缝 ( 刷毛布可车至 10 层 ) GENERAL SEAMING For regular seaming on light to medium fabric. (Able to seam up to 10 layers of terry fleece).tu 2/TBK-1 14

K19 747 747K-514H4-24/GA 2 4 2 4 I 6 0.7-2 3.2 5.5 DCX27#11 7500 747KD-514H4-24/GA 2 4 2 4 I 6 0.7-2 3.2 5.5 DCX27#11 7500 摺景车缝适用于中厚布料下层布间歇或连续性不规则摺景车缝, 可加滚边喇叭增加车缝品质如裙子, 床罩, 窗帘等.

bedspread, curtain etc. Remark : P : Piping binder (tape width 25mm, finished size 6mm).P(KV57-A).P/EC.EC.P/FG.P/FG/EC.VT.CT.VT/CSA.CT/CSA.VT/CSB.CT/CSB.VT/TUB.

15 K K-514H4-24/GA I DCX27# KD-514H4-24/GA I DCX27# 摺景车缝适用于中厚布料下层布间歇或连续性不规则摺景车缝, 可加滚边喇叭增加车缝品质如裙子, 床罩, 窗帘等. 注 : P : 布条滚边喇叭 ( 入布宽度 25mm, 出布宽度 6mm) GATHERING Continuous or intermittent random gathering on lower ply of medium fabric, can be equipped with piping binder to increase sewing quality for shirt, bedspread, curtain etc. Remark : P : Piping binder (tape width 25mm, finished size 6mm).P(KV57-A).P/EC.EC.P/FG.P/FG/EC.VT.CT.VT/CSA.CT/CSA.VT/CSB.CT/CSB.VT/TUB.CT/TUB 2/TBK-1 K20 747K-514M I DCX27# KD-514M I DCX27# 一般包缝适用于薄布料之包缝 ( 单排送具 ) GENERAL SEAMING For regular seaming on light fabric. (one row feed dog).vt.ct.vt/csa.ct/csa.vt/csb.ct/csb.vt/tub.ct/tub 2/TBK-1 15

K21 747K-514M5-23/BK 2 4 2 3 I 5 0.7-2 3.

6 6 DCX27#11 7500 缺圖线头包缝将线头包入车缝线内, 可防止缝合之开口处缝线脱落, 适用于内衣裤, 运动服之袖口及侧边缝合注 : 此车型建议搭配伺服马达, 使用定针功能, 提升车缝效率与品质 BACK LATCHING SEAMING To prevent seam

For sleeve and sideway sewing of underwear, sportswear etc.

16 K21 747K-514M5-23/BK I DCX27# KD-514M5-23/BK I DCX27# 缺圖线头包缝将线头包入车缝线内, 可防止缝合之开口处缝线脱落, 适用于内衣裤, 运动服之袖口及侧边缝合注 : 此车型建议搭配伺服马达, 使用定针功能, 提升车缝效率与品质 BACK LATCHING SEAMING To prevent seam looseness, turn over the thread and then insert into overlock seaming at the beginning of sewing. For sleeve and sideway sewing of underwear, sportswear etc. Remark : To equip with servo motor for needle position function is optional and recommended. 2/TBK-1 K22 747K-514M I DCX27# K-514M I DCX27# KD-514M I DCX27# KD-514M I DCX27# 厚毛衣料包缝适用于粗厚毛线衣物车缝 OVER SEAMING ON BULKY KNITWEAR For regular seaming on bulky knit fabric such as sweater..ct.an.ct/csa.an/ct.ct/csb.an/ct/csa.ct/tub.an/ct/csb.an/ct/tub 2/TBK-1 16

747 K23 747K-514M7-24/BK 2 4 2 4 I 6 0.7-2 3.6 7 DCX27#16 7500 747K-514M7-25/BK 2 4 2 5 I 7 0.7-2 3.6 7 DCX27#16 7500 747KD-514M7-24/BK 2 4 2 4 I 6 0.

6 7 DCX27#16 7500 747KD-514M7-25/BK 2 4 2 5 I 7 0.

turn over the thread and then insert into overlock seaming at the beginning of sewing. Such as sleeve and sideway sewing of sweater.

6 7 DCX27#16 7500 747KD-514M7-24/TG 2 4 2 4 I 6 0.6 7 DCX27#16 7500 747KD-514M7-25/TG 2 4 2 5 I 7 0.

17 747 K23 747K-514M7-24/BK I DCX27# K-514M7-25/BK I DCX27# KD-514M7-24/BK I DCX27# KD-514M7-25/BK I DCX27# 厚毛衣料线头包缝将线头包入车缝线内,可防止缝合之开口处缝线脱落,适用于毛线衣之袖口及侧边缝合 BACK LATCHING SEAMING ON BULKY KNITWEAR To prevent seam looseness, turn over the thread and then insert into overlock seaming at the beginning of sewing. Such as sleeve and sideway sewing of sweater. T32xx TB221GH CSC-T36xx T72xx 2/TBK-1 K24 747K-514M7-24/TG I DCX27# K-514M7-25/TG I DCX27# KD-514M7-24/TG I DCX27# KD-514M7-25/TG I DCX27# 厚毛衣料肩带包缝适用于毛衣之肩部多包缝一条平织布条,可防止衣服肩部变形. 注 : 布条装置之导板使用,布条最大宽度为1/4 (6.35mm) TAPE INSERTING ON BULKY KNITWEAR For sewing a woven tape onto the shoulder of knitwear such as sweater, to prevent abnormal stretching. Remark : Max. width of tape is 1/4 (6.35mm) T32xx TB221GH.EC.EC/LF-A.LF-A.EC/LS CSC-T36xx T72xx.LS.AN.AN/EC.AN/EC/LF-A.AN/EC/LS 2/TBK-1 17

K25 757K-516M2-35 2 5 3 5 I 8 0.7-2 3.6 6 DCX27#14 7500 757K-516M2-55 2 5 5 5 I 10 0.7-2 3.6 6 DCX27#14 7500 757KD-516M2-35 2 5 3 5 I 8 0.7-2 3.6 6 DCX27#14 7500 757KD-516M2-55 2 5 5 5 I 10 0.7-2 3.6 6 DCX27#14 7500 一般包缝适用于中厚布料之一般缝合, 如衬衫 GENERAL SEAMING For regular seaming on medium fabric, such as shirt.

18 K25 757K-516M I DCX27# K-516M I DCX27# KD-516M I DCX27# KD-516M I DCX27# 一般包缝适用于中厚布料之一般缝合, 如衬衫 GENERAL SEAMING For regular seaming on medium fabric, such as shirt..ct.ct/csa.ct/csb.ct/tub 2/TBK-1 K26 757K-516L I DCX27# K-516L I DCX27# KD-516L I DCX27# KD-516L I DCX27# 一般包缝适用于薄布料之一般缝合, 如衬衫 GENERAL SEAMING For regular seaming on light fabric, such as shirt..ct.ct/csa.ct/csb.ct/tub 2/TBK-1 18

K27 757 757K-401M1/TW 1 2 - - I - 0.7-2 3.6 5.

5 DCX27#14 7000 毛巾布边车缝本机为单针单勾针机型, 适用于毛巾布边之车缝 TOWEL EDGING This is a single needle, single looper machine, suitable for towel sewing..ct.ct/csa.

7-2 3.6 6 DCX27#14 7000 757KD-516H4-55/GA 2 5 5 5 I 10 0.7-2 3.6 6 DCX27#14 7000 摺景车缝适用中厚布料下层布间歇或连续性不规则摺景车缝, 可加滚边喇叭增加车缝品质如裙子, 床罩, 窗帘等.

19 K K-401M1/TW I DCX27# KD-401M1/TW I DCX27# 毛巾布边车缝本机为单针单勾针机型, 适用于毛巾布边之车缝 TOWEL EDGING This is a single needle, single looper machine, suitable for towel sewing..ct.ct/csa.ct/csb.ct/tub 2/TBK-1 K28 757K-516H4-35/GA I DCX27# K-516H4-55/GA I DCX27# KD-516H4-35/GA I DCX27# KD-516H4-55/GA I DCX27# 摺景车缝适用中厚布料下层布间歇或连续性不规则摺景车缝, 可加滚边喇叭增加车缝品质如裙子, 床罩, 窗帘等. 注 : P 布条滚边喇叭 ( 入布宽度 25mm, 出布宽度 6mm) GATHERING Continuous or intermittent random gathering on lower ply of medium fabric, can be equipped with piping binder to increase sewing quality for shirt, bedspread, curtain etc. Remark : P: Piping binder (tape width 25mm, finished size 6mm).P(KV57-A).P/EC.P/FG.P/EC/FG.CT.CT/CSA.CT/CSB.CT/TUB 2/TBK-1 19

K29 757K-516M2-35/PS 2 5 3 5 I 8 0.7-2 3.6 6 DCX27#14 7000 757K-516M2-55/PS 2 5 5 5 I 10 0.7-2 3.6 6 DCX27#14 7000 757KD-516M2-35/PS 2 5 3 5 I 8 0.7-2 3.6 6 DCX27#14 7000 757KD-516M2-55/PS 2 5 5 5 I 10 0.

5mm) POCKET BINDING To insert an extra tape to cover on the edge of pocket then by safety stitching for strengthening the pocket seaming.

6 6 DCX27#14 7000 757KD-401M2-50/TA 2 4 5 - I - 0.7-2 3.6 6 DCX27#14 7000 口袋边包缝双勾针机型, 适用于裤袋边缘加包边布条, 并车缝两道环缝线以强化缝合处增加美观注 : 标准喇叭之入布宽度为 1 (25.

20 K29 757K-516M2-35/PS I DCX27# K-516M2-55/PS I DCX27# KD-516M2-35/PS I DCX27# KD-516M2-55/PS I DCX27# 口袋边包缝在裤袋边缘多上一包边布条, 以强化缝合处, 增加美观注 : 标准喇叭之入布宽度为 3/8 (9.5mm) POCKET BINDING To insert an extra tape to cover on the edge of pocket then by safety stitching for strengthening the pocket seaming. Suitable for high quality trouser. Remark : Standard binder for tape width is 3/8 (9.5mm).EC.FG.EC/FG 2/TBK-1 K30 757K-401M2-50/TA I DCX27# KD-401M2-50/TA I DCX27# 口袋边包缝双勾针机型, 适用于裤袋边缘加包边布条, 并车缝两道环缝线以强化缝合处增加美观注 : 标准喇叭之入布宽度为 1 (25.4mm) POCKET BINDING Two needle two chainstitches. Tape binding by two chainstitch on the edge of pocket of high quality trouser. Remark : Standard binder for tape width is 1 (25.4 mm).ec.fg.ec/fg 2/TBK-1 20

767 K31 767K-516M2-324 3 6 3-2 4 I 9 0.7-2 3.6 6 DCX27#11 7000 767K-516M2-524 3 6 5-2 4 I 11 0.7-2 3.6 6 DCX27#11 7000 767KD-516M2-324 3 6 3-2 4 I 9 0.7-2 3.6 6 DCX27#11 7000 767KD-516M2-524 3 6 5-2 4 I 11 0.

21 767 K31 767K-516M I DCX27# K-516M I DCX27# KD-516M I DCX27# KD-516M I DCX27# 一般包缝适用于薄至中厚布料之一般缝合, 可由勾针及针之变换车缝出 5 种不同的缝合方式 (504,514,516, 401, ) GENERAL SEAMING For regular seaming on light to medium fabric. Specially suitable for small production workshop, and fashion design studio. A variety of five different sewing types by changing number of needle and looper. (504, 514, 516, 401, )..CT.CT/CSA.CT/CSB.CT/TUB 2/TBK-1 21

700UX SERIES FEATURES 完美的自动给油系统及滤油装置 ( 可简易更换 ) Perfect lubrication system. Auto oil supply and oil filter system (easy maintenance).

强制回油装置 ; 充分润滑同时防止渗油 Active oil return function ensures full lubrication and oil leakage proof.

- 缝制开始采用牵引式压脚方式带动布料, 特别针对加工落差大的连接缝作业能展现绝佳缝纫性能 - 充分适应牛仔布, 毛料垫子及毛毯等厚料缝制 - 零件采用耐磨设计, 寿命持久, 减少维修率, 降低成本 - Excellent feeding performance is due to

22 700UX SERIES FEATURES 完美的自动给油系统及滤油装置 ( 可简易更换 ) Perfect lubrication system. Auto oil supply and oil filter system (easy maintenance). 针距调整采用按钮式装置, 操作简易 Stitch length adjustment is easy by button pressing. 强制回油装置 ; 充分润滑同时防止渗油 Active oil return function ensures full lubrication and oil leakage proof. 搭配有上弯针勾针牵引式压脚和粗齿送布牙等极厚料缝制用组件 Equip with upper bending looper, dragging type presser foot and rough feed dog for extra heavy material sewing. - 缝制开始采用牵引式压脚方式带动布料, 特别针对加工落差大的连接缝作业能展现绝佳缝纫性能 - 充分适应牛仔布, 毛料垫子及毛毯等厚料缝制 - 零件采用耐磨设计, 寿命持久, 减少维修率, 降低成本 - Excellent feeding performance is due to dragging type presser foot. Especially shows powerful sewing capability in big thickness difference. - Applicable to denim, mat, blanket and other heavy material sewing. - Adopt wear proof design with spare parts. Better wear-resisting and longer durability thereby reduce maintenance cost. 22

700UX K32 757UX-516X2-56 2 5 5 6 I 11 0.7-1.

23 700UX K32 757UX-516X I DCX27# 牛仔布料车缝特殊传动行程结构适用于特厚布料之包缝, 例如 : 牛仔布 & 工作服 JEANS SEWING Special driving mechanism for seaming on heavy fabric such as jeans, workwears etc..ct.ct/csa.ct/csb.ct/tub 747-T 23

24 700FS SERIES FEATURES 小口径的筒型机头, 能轻松进行袖口暗缝和拷下摆缝制 Small cylinder bed ensures easy sewing operation of sleeve or tubular garment. 按钮式针距调整装置, 操作简易 Stitch length adjustment is easy by button pressing. 搭配各种自动提升押具, 自动切线, 上松紧带, 步进马达, 电脑车缝控制等装置配件, 可以充分满足客制化需求 Optional attachments are available to meet customer requirement. E.g. auto presser foot lifter, suction trimmer, multi-function computerized automatic elastic attaching device, stepping motor, tape cutter. 24

K33 700FS 737FS-504M2-04 1 3-4 I 4 0.7-2 3.6 6.

5 DCX27#11 6500 一般包缝筒型底座, 用于薄至中厚针织筒型小口径衣物之包缝如 : 袖口, 裤管口 GENERAL SEAMING

tubular parts, such as sleeve, leg opening etc..vt.vt/csa.vt/csb.vt/tub.

5 DCX27#11 6500 拷下摆筒型底座, 适用于 T 恤, 汗衫等下摆车缝 BLIND HEMMING Cylinder bed

25 K33 700FS 737FS-504M I DCX27# FS-514M I DCX27# 一般包缝筒型底座, 用于薄至中厚针织筒型小口径衣物之包缝如 : 袖口, 裤管口 GENERAL SEAMING Cylinder bed, for regular seaming for light to medium fabric of small tubular parts, such as sleeve, leg opening etc..vt.vt/csa.vt/csb.vt/tub.rls 747FS-T1 747FS-T3/SM895-A K34 737FS-505F I DCX27# 拷下摆筒型底座, 适用于 T 恤, 汗衫等下摆车缝 BLIND HEMMING Cylinder bed for hemming sleeves and bottoms of T-shirt and underwear etc...vt.vt/csa.vt/csb.vt/tub 747FS-T1 747FS-T3/SM895-A 25

K35 737FS-504M2-04/LFC-2S 1 3-4 I 4 0.7-2 3.6 6.5 DCX27#11 6500 747FS-514M2-24/LFC-2S 2 4 2 4 I 6 0.7-2 3.6 5.5 DCX27#11 6500 一般包缝利用齿轮调整控制松紧带之松紧程度, 可准确进行松紧带之包缝, 适用于泳衣, 内衣裤或运动服饰之松紧带包缝注 : 1.

26 K35 737FS-504M2-04/LFC-2S I DCX27# FS-514M2-24/LFC-2S I DCX27# 一般包缝利用齿轮调整控制松紧带之松紧程度, 可准确进行松紧带之包缝, 适用于泳衣, 内衣裤或运动服饰之松紧带包缝注 : 1. 配标准押具 P 若需其他规格请下单时特别注明 P101 (2mm ~ 13mm) P102 (2mm ~ 20mm) P103 (2mm ~ 30mm) WP103 (2mm ~ 35mm) GENERAL SEAMING Elastic tap feeding: the length and the tension are controlled by gear box. For attaching on swimwear, underwear or sportswear etc. Remark : 1. Standard presser foot P101 2.Available size as below: P101 (2mm ~ 13mm) P102 (2mm ~ 20mm) P103 (2mm ~ 30mm) WP103 (2mm ~ 35mm).LF-A.LS 747FS-T1 747FS-T3/SM895-A 26

K36 700FS 737FS-504M2-04/LF-D3 1 3-4 I 4 0.7-2 3.6 6.5 DCX27#11 5500 747FS-514M2-24/LF-D3 2 4 2 4 I 6 0.7-2 3.6 5.

手动 / 自动 / 测试之送带 / 切带可自由选择操作, 并于萤光幕上显示执行状况 4. 送带速度可由正常调整至较高速 5. 送带马达可停止, 改为一般车缝 6. 车缝中遇失败, 可自动调整至原工程第一段重新车缝 7. 可调式前送带, 延迟送带, 前后吸风, 倒带功能 8. 前送带时可追加倒带之功能 9. 车缝中可强迫送带, 以补车缝送带之不足. 注 : 1.

可选配长滚轮适用 16mm~50mm 之鬆紧带 (LF-D3A) MULTI-FUNCTION COMPUTERIZED AUTOMATIC ELASTIC ATTACHING For attaching elastic on small openings of swimsuit, leotards or brief etc.

27 K36 700FS 737FS-504M2-04/LF-D I DCX27# FS-514M2-24/LF-D I DCX27# 多功型自动松紧带包缝对于松紧带之包缝工程可利用电脑控制 26 种车缝类别记忆, 每种车缝类别又可作 26 段式松紧程度及长度控制之自动送带, 可有效提高缝制效率, 适用于泳衣, 紧身衣或内裤小口径上松紧带车缝特点 : 1. 萤光液晶字幕显示种工程类别电脑记忆功能, 每种功能类别有 26 段式鬆紧程度及长度可自由调整设定 3. 手动 / 自动 / 测试之送带 / 切带可自由选择操作, 并于萤光幕上显示执行状况 4. 送带速度可由正常调整至较高速 5. 送带马达可停止, 改为一般车缝 6. 车缝中遇失败, 可自动调整至原工程第一段重新车缝 7. 可调式前送带, 延迟送带, 前后吸风, 倒带功能 8. 前送带时可追加倒带之功能 9. 车缝中可强迫送带, 以补车缝送带之不足. 注 : 1. 本机标准配备如下 : VT : 垂直式自动吸风切线装置 LF-A : 电动式上送带装置 TU : 空气控制阀 / 集尘装置. 配短滚轮适用 16mm 以下之鬆紧带 (LF-D3) 2. 可选配长滚轮适用 16mm~50mm 之鬆紧带 (LF-D3A) MULTI-FUNCTION COMPUTERIZED AUTOMATIC ELASTIC ATTACHING For attaching elastic on small openings of swimsuit, leotards or brief etc. 26 sets of sewing project programmed in computer, each project has 26 sections of tension and length control. Therefore, increasing production efficiency. Function : 1. LCD panel display sets of sewing project computerized memory, each project has 26 sections of tension and length control. 3. Manual/automatic/feeding test/tape cutting are available and each process shown on LCD panel. 4. Elastic tape feeding can be adjusted to normal or high speed. 5. Feeding motor can be stopped and then be regarded as regular sewing. 6. If operation failed, automatically return to the first section of sewing project. 7. Adjustable functions of starting feeding, postpone feeding, beginning and ending suction, stretching elastic etc. 8. Beginning feeding can be added a function of stretching elastic tape. 9. Active feeding to prevent inefficient tape feeding. Remark : 1. This machine is equipped with following devices: VT : Vertical type pneumatic chain cutter LF-A : Electric tape feeding device TU : Venturi device. With short roller for elastic width under of 16mm (LF-D3) 2. Optional long roller for elastic width of 16mm~50mm (LF-D3A) T7201KH 747FS-T2 747FS-T5/SM889-A 27

DFT / DRT SERIES FEATURES DFT 前综合送机型特点 :

28 DFT / DRT SERIES FEATURES DFT 前综合送机型特点 : 面料适应性强 ( 薄中厚滑溜或伸缩性布料 ) 对格车缝平整精准 DFT Front Top-Feed Feature: Applicable for light/ medium/ heavy/ slick/ elastic material. Also, plaid cloth stitching can be well aligned. DRT 后综合送机型特点 : 面料适应性强 ( 中, 厚特殊面料 ) 车缝平整缝合不起皱不错位 DRT Rear Top-Feed Feature: Applicable for medium/ heavy/ special material. Prevent crumple or uneven seaming. 全新直针式上差动结构 Brand new direct-drive needle bar with top-feed differential feeding mechanism. 上盖旋钮调整差动, 微调快速简易 Adjusting knob is convenient to users to fine tune the differential feeding. 差动确实, 持久耐用 Differential feeding is accurate and durable. 加大操作空间, 作业顺畅 Enlarged operation space offers better sewing experience. 28

K37 700DFT 747DFT-514M2-24 2 4 2 4 I 6 0.7-2 3.6 6 DCX27#11 5000 757DFT-516M2-35 2 5 3 5 I 8 0.7-2 3.6 6 DCX27#14 5000 757DFT-516M2-56 2 5 5 6 I 11 0.

6 6 DCX27#14 5000 前综合送车缝在针之前方多加一上送具传动结构, 可车缝较滑熘或伸缩性不同之布料, 或对格纹 & 图案等车缝, 可防止布料起皱及车缝后上下裁片长短不一 FRONT TOP-FEED SEAMING With an extra upper-feed

stretching during sewing operation..dt.dt/csa.dt/csb.dt/tub 747-T K38 747DFT-514H4-24/GB 2 4 2 4 I 6 0.

6 6 DCX27#14 5000 前综合送摺景车缝可上下层布间歇或连续性摺景, 亦可上下层布分开摺景, 脚控制器主要是控制上层布之摺景注 : P : 布条滚边喇叭 ( 入布宽度 25mm, 出布宽度 6mm) FRONT TOP-FEED GATHERING

29 K37 700DFT 747DFT-514M I DCX27# DFT-516M I DCX27# DFT-516M I DCX27# 前综合送车缝在针之前方多加一上送具传动结构, 可车缝较滑熘或伸缩性不同之布料, 或对格纹 & 图案等车缝, 可防止布料起皱及车缝后上下裁片长短不一 FRONT TOP-FEED SEAMING With an extra upper-feed dog in front of needle for a smooth even stitching on slipping, to adjust for different fabrics elasticity so to prevent shrinkage or stretching during sewing operation..dt.dt/csa.dt/csb.dt/tub 747-T K38 747DFT-514H4-24/GB I DCX27# DFT-516H4-35/GB I DCX27# DFT-516H4-56/GB I DCX27# 前综合送摺景车缝可上下层布间歇或连续性摺景, 亦可上下层布分开摺景, 脚控制器主要是控制上层布之摺景注 : P : 布条滚边喇叭 ( 入布宽度 25mm, 出布宽度 6mm) FRONT TOP-FEED GATHERING Intermittently gathering on both upper and lower plies of fabric. It can also be operated separately to gather either upper or lower ply of fabric. Knee controller mainly controls the gathering on the upper ply of fabric. Remark : Piping binder (Tape width 25mm, finished size 6mm).P.P/DT.DT.P/DT/CSA.DT/CSA.P/DT/CSB.DT/CSB.P/DT/TUB.DT/TUB 747-T 29

K39 747DRT-514M2-24 2 4 2 4 I 6 0.7-2 3.6 6 DCX27#14 5000 757DRT-516M2-35 2 5 3 5 I 8 0.7-2 3.6 6 DCX27#14 5000 757DRT-516M2-56 2 5 5 6 I 11 0.

6 6 DCX27#14 5000 後综合送车缝在针之后方多加一上送具传动结构, 可使布料车缝平顺, 不起皱, 适用于大衣等高级服饰 REAR TOP-FEED SEAMING With an extra

30 K39 747DRT-514M I DCX27# DRT-516M I DCX27# DRT-516M I DCX27# 後综合送车缝在针之后方多加一上送具传动结构, 可使布料车缝平顺, 不起皱, 适用于大衣等高级服饰 REAR TOP-FEED SEAMING With an extra upper feed dog at rear of needle to keep fabric smooth feeding and even after seaming. Suitable for sewing high quality garment such as overcoat..dt.dt/csa.dt/csb.dt/tub 747-T 30

DEVICE AN 角刀 Angle Knife 修布辅助, 对于厚料之修布更顺畅 Cloth trimming assistance to heavy material.

KD207 手轮 : 订机头有装此零件以配合定针用, 若个别订购 BK 组则依需要订购.

. BK232 sewing bed : optional for BK device.

Type Chain Cutter (Flat Suction) 利用吸风式马达或空压机将线吸入切刀槽中予以切断 ( 较适用于 4~6 线之机型 ) Take thread into trimmer tube by

(Applicable for 4~6 thread machine) 适用机型 applicable model : 747K, 747KD, 757K, 757KD, 767K, 767KD DT EC

适用 RT/FT) Take thread into trimmer tube by (Applicable for top feed RT/FT) 适用机型 applicable model : 747DFT,

31 DEVICE AN 角刀 Angle Knife 修布辅助, 对于厚料之修布更顺畅 Cloth trimming assistance to heavy material. 适用机型 applicable model : 747K-514M7, 747KD-514M7 BK 包线头装置 Back Latching 将线头一起包入车缝, 可防止缝合开口处 ( 如袖口 ) 之缝线脱落. KD207 手轮 : 订机头有装此零件以配合定针用, 若个别订购 BK 组则依需要订购. BK232 车布导板 : 单独订购 BK 组件不含, 有需请另订 To prevent seam looseness, turn over the thread and then insert into overlock seaming at the beginning of sewing.. KD207 hand wheel: standard equipment of 700K/BK machine, optional for BK device.. BK232 sewing bed : optional for BK device. 适用机型 applicable model : 737K-504M5, 737KD-505M5, 747K-514M5, 747KD-514M5 CT 水平式自动吸风切线装置 Horizontal Pneumtaic Type Chain Cutter (Flat Suction) 利用吸风式马达或空压机将线吸入切刀槽中予以切断 ( 较适用于 4~6 线之机型 ) Take thread into trimmer tube by suction motor or air compressor. (Applicable for 4~6 thread machine) 适用机型 applicable model : 747K, 747KD, 757K, 757KD, 767K, 767KD DT EC 水平式自动吸风切线装置 Horizontal Pneumtaic Type Chain Cutter (Flat Suction For Top Feed RT/FT) 利用吸风式马达或空压机将线吸入切刀槽中予以切断 ( 适用 RT/FT) Take thread into trimmer tube by suction motor or air compressor. (Applicable for top feed RT/FT) 适用机型 applicable model : 747DFT, 747DRT, 757DFT, 757DRT 电动式切布条 / 松紧带条装置 Electric Type Tape / Elastic Cutter 利用手动按钮方式切断松紧带, 不织布条或滚边布条 1. 分标准切刀 EC-A (1"), 长切刀 EC-A1 (1-1/4") 2. 标准为手动切带, 另可选购膝控切带 (FEC34-A) Cuts tape/ elastic by pressing the button. 1. EC-A: Standard knife (1") EC-A1: Long knife (1-1/4") 2. Hand-control button: standard Knee-control paddle (FEC34-A): Optional 适用机型 applicable model :MODEL w/ga/p, MODEL w/lfc-3, MDDEL w/ps, MODEL w/ta, MODEL w/tg, MODEL w/tr 31

CSA 铁桶式吸风马达 Iron Case Suction Device 1. 双吸马力足 ( 前后吸 ), 连接在车头上比同类马达大 1/4 的马力 ( 后吸为切刀, 前为漏斗式吹气 ) 2. 噪音低, 可比同类马达降低 5dB 3. 温度低, 可比同类马达降温 18% 4. 节省空间, 装在车板下比同类马达节省 10% 的体积 5. 容易安装, 可比同类马达少 1/2 安装时间 6.

5dB lower than normal standard. 3. Low temperature. 18 degree celsius lower than normal standard. 4. Space efficiency. 10% space saved than normal standard. 5. Easy assembly.

适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt CSB FG 塑胶筒式吸风马达 Plastic Tank Suction Device 1. 单吸马力足, 装在车头上比同类马达大 1/4 的马力 ( 适用后吸切刀 ) 2. 噪音低, 可比同类马达降低 5dB 3. 温度低, 可比同类马达降温 10% 4.

Quiet, 5dB lower than normal standard. 3. Low temperature. 10% lower than normal standard. 4. Space efficiency. 25% space saved than normal standard. 5. Easy assembly. 25% time saved for assembly. 6.

32 CSA 铁桶式吸风马达 Iron Case Suction Device 1. 双吸马力足 ( 前后吸 ), 连接在车头上比同类马达大 1/4 的马力 ( 后吸为切刀, 前为漏斗式吹气 ) 2. 噪音低, 可比同类马达降低 5dB 3. 温度低, 可比同类马达降温 18% 4. 节省空间, 装在车板下比同类马达节省 10% 的体积 5. 容易安装, 可比同类马达少 1/2 安装时间 6. 清理顺畅, 拆装容易, 集尘无漏洞 7. 风压可视需求调整大小 1. Two way suction (rear and front suction). 1/4 HP more than normal standard. (Rear suction is for thread trimmer, front suction is for fabric waste). 2. Quiet. 5dB lower than normal standard. 3. Low temperature. 18 degree celsius lower than normal standard. 4. Space efficiency. 10% space saved than normal standard. 5. Easy assembly. 50% time saved for assembly. 6. Easy to clean, easy to assemble/disassemble, completed dust collection. 7. Air pressure can be adjusted as required. 适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt CSB FG 塑胶筒式吸风马达 Plastic Tank Suction Device 1. 单吸马力足, 装在车头上比同类马达大 1/4 的马力 ( 适用后吸切刀 ) 2. 噪音低, 可比同类马达降低 5dB 3. 温度低, 可比同类马达降温 10% 4. 节省空间, 装在车板下比同类马达节省 25% 的体积 5. 容易安装, 可比同类马达少 1/4 安装时间 6. 清理顺畅, 拆装容易, 集尘无漏洞 7. 风压可视需求调整大小 1. One way suction, 1/4 HP more than normal standard. (for rear suction thread trimmer) 2. Quiet, 5dB lower than normal standard. 3. Low temperature. 10% lower than normal standard. 4. Space efficiency. 25% space saved than normal standard. 5. Easy assembly. 25% time saved for assembly. 6. Easy to clean, easy to assemble/disassemble, completed dust collection. 7. Air pressure can be adjusted as required. 适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt 侧带盘 Side Tape Holder 置于桌板右侧放布条用 For tape feeding, on the right side of the table. 适用机型 applicable model : MODEL w/ga/p, MDDEL w/ps, MODEL w/ta GA 折景装置 Gathering 下层布间歇或连续性不规则折景. P 滚边器 ( 喇叭 )KV57( 入布宽度 25mm/ 出布宽度 6mm) 依需要可另订若滚边加绳需另订押具 ( 押具底需磨一条沟 ), 为一般押具代号多加 P, 如 : P204P Continuous or intermittent random gathering on lower ply. P: Pipping folder KV57 (tape width 25mm / finish width 6mm) is optional. For piping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. eg P204P. 适用机型 applicable model : 747K-514H4, 747KD-514H4, 757K-516H4, 757KD-516H4 32

Device GB 前综合送折景装置 Gathering Device for Top Feed Model 前综合送上下层布间歇或连续性不规则折景 P 滚边器 ( 喇叭 )KV57( 入布宽度 25mm / 出布宽度 6mm) 依需要可另订若滚边加绳需另订押具 ( 押具底需磨一条沟 ), 为一般押具代号多加 P, 如 : P463P Continuous or intermittent

For piping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. e.g. P463P.

33 Device GB 前综合送折景装置 Gathering Device for Top Feed Model 前综合送上下层布间歇或连续性不规则折景 P 滚边器 ( 喇叭 )KV57( 入布宽度 25mm / 出布宽度 6mm) 依需要可另订若滚边加绳需另订押具 ( 押具底需磨一条沟 ), 为一般押具代号多加 P, 如 : P463P Continuous or intermittent random gathering on lower ply, for top feed model. P: Pipping folder KV57 (tape width 25mm / finish width 6mm) is optional. For piping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. e.g. P463P. 适用机型 applicable model : 747DFT-514H4, 757DFT-516H4 KB61-A 平台式车布导板 Flat Bed Cloth Plate 将筒型车改为平台式, 方便于非筒型衣物包缝 To convert cylinder bed machine into flat bed machine. For normal overlock sewing operation. 适用机型 applicable model : 737FS, 747FS LFA 电动式松紧带控料装置 Electric Type Tape Feeding & Metering 利用电子马达带动松紧带, 使其放松到零松紧状况, 并可控制所需松紧带之长短, 使车缝时松紧度能一致 To keep constant tension for sewing. Elastic tape is fed by motor for zero tension and required length. 适用机型 applicable model : MODEL w/lfc-3, MODEL w/tg, MODEL w/tr LFC-2S 机械式松紧带送带装置 Mechanical Type Elastic Feeding 利用齿轮调整控制松紧带之松紧程度 ; * 押具 : 分 3 线及 4 线用如 :P101-3,P101-4 ( 标准品配 P101 除非下单时注明 ) 押具代号 P101 P102 P103 WP103 松紧带尺寸 2-13mm 2-20mm 2-30mm 2-35mm To Control elastic tape tension by adjusting the gear. Presser foot: P101-3 for 3 thread P101-4 for 4 thread Standard is P216. Special demand by request. Presser Foot P101 P102 P103 WP103 Elastic Size 2-13mm 2-20mm 2-30mm 2-35mm 适用机型 applicable model : 737FS-504M2, 747FS-514M2 33

LFC-3 机械式松紧带送带装置 Mechanical Type Elastic Feeding 利用齿轮调整控制松紧带之松紧程度 ; * 押具 : 分 3 线及 4 线用如

Presser foot: P218-3 for 3 thread P218-4 for 4 thread 适用机型 applicable model : 737K-504M2,

for Gathering 入布宽度 25 mm / 出布宽度 6 mm Tape width 25 mm / Finish width 6 mm 适用机型 applicable

34 LFC-3 机械式松紧带送带装置 Mechanical Type Elastic Feeding 利用齿轮调整控制松紧带之松紧程度 ; * 押具 : 分 3 线及 4 线用如 :P218-3,P218-4 To Control elastic tape tension by adjusting the gear. Presser foot: P218-3 for 3 thread P218-4 for 4 thread 适用机型 applicable model : 737K-504M2, 737KD-504M2, 747K-514M2, 747KD-514M2 LS 上方带盘 Upper Tape Holder 置于上前方放布条或松紧带 For top feeding tape or elastic. 适用机型 applicable model : MODEL w/lfc-3, MODEL w/tg, MODEL w/tr P(KV57) 折景滚边喇叭 Piping Binder for Gathering 入布宽度 25 mm / 出布宽度 6 mm Tape width 25 mm / Finish width 6 mm 适用机型 applicable model : MODLE w/ga PS 口袋包边缝合装置 Pocket Sewing 在裤袋边缘多车上一包边布条, 以强化缝合处增加美观. 喇叭 PS201: 可用布条宽度为 3/8 (9.5mm) Overlock sewing with tape binding for strengthening the pocket edge. PS201: Folder, for tape width 3/8" (9.5mm) 适用机型 applicable model : 757K-516M2, 757KD-516M2 PZ 拉链车缝装置 Zip Seaming 将拉链与衣身裁片同时包缝 Overlock sewing for joint between zipper and cloth. 适用机型 applicable model : 737K-504M3, 737KD-504M3 34

Device TA 双勾针环缝口袋包边缝合装置 Two Chain stitch Pocket Sewing 在裤袋边加包边布条并车两道环缝线, 以强化缝合处增加美观. 喇叭布条入口宽度为 1 (25.

适用机型 applicable model : 757K-401M2-50, 757KD-401M2-50 TB 全沉式机头安装支撑组 Machine Body Supporter for Full Submerged Table 全沉式桌板机头支撑组 700K

适用机型 applicable model : Table 747-T1 TBK 全沉式机头安装支撑组 Machine Body Supporter for Full Submerged Table 全沉式桌板机头支撑组 700K 适用机型 applicable

押具 P254J-4A 布条最大宽度为 13mm To prevent knit wear shoulder stretching, insert woven tape for strengthening.

35 Device TA 双勾针环缝口袋包边缝合装置 Two Chain stitch Pocket Sewing 在裤袋边加包边布条并车两道环缝线, 以强化缝合处增加美观. 喇叭布条入口宽度为 1 (25.4mm) Tape binding by two chainstitch sewing for strengthening the pocket edge. Folder: for 25.4mm width tape. 适用机型 applicable model : 757K-401M2-50, 757KD-401M2-50 TB 全沉式机头安装支撑组 Machine Body Supporter for Full Submerged Table 全沉式桌板机头支撑组 700K series machine base for full submerged table. 适用机型 applicable model : Table 747-T1 TBK 全沉式机头安装支撑组 Machine Body Supporter for Full Submerged Table 全沉式桌板机头支撑组 700K series machine base for full submerged table. 适用机型 applicable model : Table 1, Table 1 TG 车肩带装置 Tape Guide 在车针织布时多车上一条平织布条, 可防止肩部宽变型张开. 押具 P254J-4A 布条最大宽度为 13mm To prevent knit wear shoulder stretching, insert woven tape for strengthening. P254J-4A: Presser foot for maximun tape width is 13 mm. 适用机型 applicable model : 747K-514M2, 747KD-514M2, 747K-514M7, 747KD-514M7 TR 简易松紧带控制组 Elastic Controller 利用弹簧片简易控制松紧带松紧度, 适合不织布或塑胶布浴帽车缝 Applicable for non-woven/ plastic shower cap sewing. Control the tension of elastic by the spring. 适用机型 applicable model : 737K-504M2, 737KD-504M2 35

TU 空气阀 Venturi 当踩脚踏板开始车缝时, 空压机所供给之压缩空气便会将车缝线吸入切刀槽中予以切断, 并使其线屑顺着塑胶管吸入塑胶筒中 When stepped on the pedal for sewing, air from compressor

适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt, Please Refer Motor Page TW 单针环缝 ( 毛巾车 ) 装置 Towel Edging 适合车毛巾边缘 Applicable

适用机型 applicable model : 757K-401, 757KD-401 VT 垂直吸风式自动切线装置 Vertical Pneumatic Type Chain Cutter (Side Suction) 利用吸风马达或空压机将线吸入切刀槽中予以切断

(Applicable for 3~4 thread machine) 适用机型 applicable model : 737K, 737KD, 747K, 747KD, 737FS, 747FS WR/ LFC-3 管状布条车缝装置 ( 反条装置 )

2mm (7/8 ), 成型肩带直径 5mm Overlock sewing at knit tape edge and then turn it into tube. For swimwear, night gown etc.

36 TU 空气阀 Venturi 当踩脚踏板开始车缝时, 空压机所供给之压缩空气便会将车缝线吸入切刀槽中予以切断, 并使其线屑顺着塑胶管吸入塑胶筒中 When stepped on the pedal for sewing, air from compressor vacuums the thread into the trimmer tube, and then the trimmer cuts the thread. Thread waste is collected by the tube. 适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt, Please Refer Motor Page TW 单针环缝 ( 毛巾车 ) 装置 Towel Edging 适合车毛巾边缘 Applicable for towel edge sewing. 适用机型 applicable model : 757K-401, 757KD-401 VT 垂直吸风式自动切线装置 Vertical Pneumatic Type Chain Cutter (Side Suction) 利用吸风马达或空压机将线吸入切刀槽中予以切断 ( 较适用于 3~4 线之机型 ) Take thread into trimmer tube by suction motor or air compressor. (Applicable for 3~4 thread machine) 适用机型 applicable model : 737K, 737KD, 747K, 747KD, 737FS, 747FS WR/ LFC-3 管状布条车缝装置 ( 反条装置 ) Spaghetti Sewing 针织布条之拷边车缝并反条成管形, 适用于各种泳衣或睡衣韵律服等之管形肩带. 喇叭布条宽度约 22.2mm (7/8 ), 成型肩带直径 5mm Overlock sewing at knit tape edge and then turn it into tube. For swimwear, night gown etc. Folder size: tape width is 22.2mm, finished tube size is 5mm in diameter. 适用机型 applicable model : 737K, 737KD TUB-1 吸线屑装置 Thread Waste Vaccuming 配件精简, 组装便利, 低噪音. 含. 单出气压开关组. 消音组 ( 拥有专利设计, 可以有效将噪音分贝减低 ) Simplified accessories, easy assembly, quiet. Including:. Single-way air switch set.. Silencer (patented design, lower the sound level effectively) 适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt 36

Device TUB-2 吸线屑 & 抬押脚装置 Thread Waste Vaccuming with Presser Foot Lifter 配件精简, 组装便利, 低噪音. 含. 单出气压开关组. 消音组 ( 拥有专利设计, 可以有效将噪音分贝减低 ). 抬押脚装置 Simplified accessories, easy assembly, quiet. Including:.

适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt TUB-3 吸布 & 线屑装置 Fabric / Thread Waste Vaccuming 配件精简, 组装便利, 低噪音. 含. 双出气压开关组. 消音组 ( 拥有专利设计, 可以有效将噪音分贝减低 ).

. Silencer (patented design, lower the sound level effectively). Fabric waste vacuuming set (Y-shape vacuum gate is 360 rotative for the flexibility of operation space.

37 Device TUB-2 吸线屑 & 抬押脚装置 Thread Waste Vaccuming with Presser Foot Lifter 配件精简, 组装便利, 低噪音. 含. 单出气压开关组. 消音组 ( 拥有专利设计, 可以有效将噪音分贝减低 ). 抬押脚装置 Simplified accessories, easy assembly, quiet. Including:. Single-way air switch set.. Silencer (patented design, lower the sound level effectively). Auto presser foot lifter. 适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt TUB-3 吸布 & 线屑装置 Fabric / Thread Waste Vaccuming 配件精简, 组装便利, 低噪音. 含. 双出气压开关组. 消音组 ( 拥有专利设计, 可以有效将噪音分贝减低 ). 吸布屑组 (Y 型吸布屑座 360 任意旋转, 增加工作活动空间, 吸布口减音器, 可直接依使用者需求上下移动也可衔接管子, 直接清理机器桌面, 延伸为桌上吸尘器 ) Simplified accessories, easy assembly, quiet. Including:. Double-way air switch set.. Silencer (patented design, lower the sound level effectively). Fabric waste vacuuming set (Y-shape vacuum gate is 360 rotative for the flexibility of operation space.. The height of vacuum gate silencer is adjustable. Also available is a tube to connect to as a vacuum cleaner for table top.) 适用机型 applicable model : MODEL w/ct, MODEL w/dt, MODEL w/vt ET-A1 ET-A2-K ET-A2-KD 前后电眼吸风集尘控制组 Front & Rare Electronic-eye Controlled Vaccum System 前后电眼吸风集尘控制组及气动抬押脚装置 Front & Rare Electronic-eye Controlled Vaccum System with Pneumatic Presser Foot Lifter. 节约能源 : 降低空压机启动次数, 达到节省能源目的. 降低噪音 : 仅车缝过程中依需求启动电磁阀控制气阀动作. 安装容易 : 简易安装即可使用. 较佳的车缝品质 : 透过红外线检知后再启动吸风装置, 让车缝时更稳定.Energy saving: Reduce air compressor's loading to save energy.. Noise reducing: By air valve control, air suction works only when sewing operation is proceeding.. Easy installation: To install simply and then use immediately.. Better sewing quality: As the sensor accurately delivers the start signal to air suction device, it stabilizes the sewing operation. 适用机型 applicable model : ET-A1 for 700K & 700KD, ET-A2-K for 700K, ET-A2-KD for 700KD 37

38 MOTOR 代码 Motor No. 适用机型规格 /Specification 备注 Applicable HP(W) V P Phase HZ / R.P.M. Remark Model T3221xx 220 T3222xx 240 T3233xx 1/3HP T3239xx (250W) F 离合器马达 T3223xx HZ/2850R.P.M. 700K CLUTCH T3224xx HZ/3450R.P.M. 757UX MOTOR T3230xx FS T3201xx 1/2HP T3202xx 240 (400W) T3203xx T3204xx 220 2/3HP 700K TB221GH (500W) 700F 定针用手轮伺服器马达 757UX Hand wheel for needle SERVO position needed T7202KH 3/4HP HZ/60HZ 700FS MOTOR 4 KD35D for 700F/700FS (550W) 5000R.P.M. 700K/BK KD207 for 700K T7201KH FS/LF-Dx T303HE 300W KD CSC - 2 合 1 两用马达结合离合器马达和吸风马达功能, 设计精密, 品质优良, 故障率低 - 节能省电, 不需有空压设备 - 降低成本, 可少购吸风马达或空压设备 - 低噪音设计 - 2-in-1 dual motor integrates functions of both clutch motor and suction motor. Precise design ensures good quality and low failure rate. - Energy saving. Independent air compressor system. - Cost saving, 2-in-1 dual motor saves the cost of suction motor or compressor. - Low noise sound level. 代码 Motor No. 离合器马达 + 吸布屑线装置 CLUTCH MOTTER W/FABRIC & THREAD WASTE VACUUMING DEVICE 离合器马达 + 吸布屑线装置 CLUTCH MOTTER W/THREAD WASTE VACUUMING DEVICE 规格 /Specification HP(W) V P Phase HZ R.P.M. CSC-T3601U CSC-T3602U 110 CSC-T3603U CSC-T3604U 220 CSC-T3605U CSC-T3606U CSC-T3607U CSC-T3608U CSC-T3621U 1/2Hp (400W) CSC-T3622U 110 CSC-T3623U CSC-T3624U 220 CSC-T3625U CSC-T3626U CSC-T3627U CSC-T3628U 适用机型 Applicable Model MODEL w/ct MODEL w/dt MODEL w/vt 38

540 40 2 1200 540 40 2 1200 540 40 3 1200 540 40 3 1200 540

747FS-T2 1200 540 40 747FS-T3 1200 540 40 747FS-T5 1200 540

Full-submerged 全沉式 Full-submerged 全沉式 Full-submerged 全沉式

Semi-submerged 半沉式 Semi-submerged 上乘式 Non-submerged 上乘式

700K/EC,CT,VT 700KD/EC,CT,VT,FLP 700F, 700DFT/DRT 757UX 700F

TBK-1 set required 须搭配 TBKD-1 组 TBKD-1 set required 须搭配 TBK-1

39 TABLE 桌板代号 Item No. 长 Length 尺寸 / SIZE (mm) 宽 Width 厚 Thickness T T FS-T FS-T FS-T FS-T 说明 Description 半沉式 Semi-submerged 半沉式 Semi-submerged 全沉式 Full-submerged 全沉式 Full-submerged 全沉式 Full-submerged 全沉式 Full-submerged 半沉式 Semi-submerged 全沉式 Full-submerged 半沉式 Semi-submerged 半沉式 Semi-submerged 上乘式 Non-submerged 上乘式 Non-submerged 适用机型 Applicable Model 700K 700KD 700K 700KD 700K/EC,CT,VT 700KD/EC,CT,VT,FLP 700F, 700DFT/DRT 757UX 700F 700FS 747FS/LFD-3 700FS 747FS/LFD-3 备注 Remark 须搭配 TBK-1 组 TBK-1 set required 须搭配 TBKD-1 组 TBKD-1 set required 须搭配 TBK-1 组 TBK-1 set required 须搭配 TBKD-1 组 TBKD-1 set required 须搭配 TB-A 组 TB-A set required 须搭配 SM895-A With SM895-A 须搭配 SM889-A With SM889-A 39

CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm mm Spindle bore 181mm is standard. 255,5 or 5mm is option. Chuck is optional. You ca

CNC KINWA FLAT BED CNC LATHE CL-68x00 CL-68/CL-78 Series Swing 11, mm Between centers 00~7000mm Spindle bore 181, 255, 5, 5mm Spindle motor 60HP CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm