- PDF 免费下载

Size: px

Start display at page:

Download ""

照郁
6 years ago
Views:

1 Quick Start Guide 快速入门指南 V.0 LED

3 Contents EN CHS Quick Start Guide 3 快速入门指南 7

5 N3 Quick Start Guide. N3 Product Profile Introduction The N3 is the third generation NAZA TM flight control system designed for serious multi-rotor enthusiasts. It is a reliable and robust system with double IMUs and can be attach with external high-performance sensors. It uses advanced flight control and sensor fusion algorithms to maintain complete stability and integrity of the aerial system. EN The N3 is fully compatible with the DJI TM Onboard, Mobile SDKs and other DJI productions, allowing developers to optimize the system for specific applications. When used with the DJI Lightbridge, it provides direct access to DJI GO features including Intelligent Flight Modes. With all essential components integrated into the N3 flight controller (including the double IMUs, barometer and data recorder), the device is powerful and highly compact. LED Features Basic Flight Modes P-Mode (Positioning) Atti Mode (Attitude) Sport Mode Manual mode Their control mode can be modified via Assistant. Intelligent Flight Modes Waypoints and Point of Interest (POI) Course Lock and Home Lock (Requires the DJI GO App and DJI Lightbridge.) Ultimate Stability Built-in double IMUs and can be attach with external high-performance sensors (Connecting to an A3 upgrade kit). Ultimate Reliability Built-in SD card data recorder for recording flight data. GS DJI Ground Station is available when connecting to the DATALINK PRO. DJI SDKs Fully compatible with the Onboard SDK and Mobile SDK. Developers Website: 06 DJI. All Rights Reserved. 3

6 N3 Quick Start Guide Parts EN Flight Controller. PMU Port Derives power from the PMU.. LED Port Communicates with the LED module. 3. M-M8 Pins Connects to the corresponding ESC PWM port for each motor iesc Port Communicates with the DJI Smart ESC. 5. RF Port Communicates with the DJI Lightbridge Air System. 6. Status Indicator Indicates the status of the flight controller. 7. CAN Port CAN Bus port (Reserved). 8. S-Bus Port Communicates with a DJI DR6 or S-Bus receiver. 9. F-F4 Pins Multifunction PWM output ports. 0. F5-F8 Pins Multifunction PWM I / O ports.. API Port Communicates with an SDK device.. EXP Port Communicate with the A3 upgrade kit. 3. Orientation Arrow The flight controller orientation arrow. 3 LED GNSS-Compass Module. Orientation Arrow The GNSS-Compass module should be mounted with the arrow pointing to the aircraft s nose.. GNSS-Compass Status Indicator Indicates the status of the GNSS-Compass Module. 3. Extended CAN Port Dedicated DJI CAN-Bus port. Communicates with a DJI device. LED Module. Flight Status Indicator Indicates the status of the flight control system.. Micro USB Port Used to configure and upgrade the N3 via DJI Assistant. 3 PMU Module. ibat Communicates with DJI Intelligent Flight Battery Power Status Indicator Indicates the power status of the flight controller. 3. 3S-S Derives power from DJI Intelligent Flight Battery or other LiPo battery. 4. Power Port (9V A) Connected to the Flight Controller for power supply. 5. CAN Port Connected to the GNSS-Compass module DJI. All Rights Reserved.

7 N3 Quick Start Guide. Preparation Check the Items Read the In the Box sheet and check that all items are in good condition. If there is any missing or damaged item, please contact DJI Support. Read the User Manual The N3 is a powerful system. To make use of all their capabilities, read the user manual thoroughly before configuring the system. PDF EN Download the DJI Assistant DJI Assistant is used to configure the N3 flight control system. DJI Assistant Supports Windows 7 (or later) or Mac OS X 0.9 (or later). Download the DJI GO App This is required if you are using the DJI Lightbridge video downlink. Search DJI GO on the App Store or Google Play and install the app on your mobile device. Watch the Video Tutorials Installation Demo Connecting the Modules How to use DJI Assistant DJI GO App Tutorial Videos The DJI GO app supports ios 8.0 (or later) and Android 4.. (or later). Prepare your Equipment Ensure you have a suitable airframe, remote controller system, ESCs and battery to use with the N3. Below is a list of compatible equipment. Airframe: DJI F550* or types I4, X4, I6, V6, Y6, IY6, X8, I8, V8 Remote Controller System: DJI Lightbridge *, DJI DR6, S-Bus ESC: Battery: Optional Equipment: ESCs with up to 400 Hz control frequency DJI Intelligent Flight Battery or 3S to S LiPo battery DJI Intelligent Landing Gear, DJI Zenmuse Z5, D-RTK, DATALINK, iosd mini, iosd MARK II *Recommended for the N3. 06 DJI. All Rights Reserved. 5

8 N3 Quick Start Guide 3. Installation EN Set Up the System Watch the video tutorial for an overview of the installation process. Refer to the Installation section of the user manual for detailed procedures. DJI Assistant Configure the Parameters Watch the video tutorial for a brief walkthrough. Then launch DJI Assistant and follow the hints. LED Blinking Patterns Refer to the LED Indicator section of the user manual for a detailed description of blinking patterns. Strictly follow the provided guidelines. Failure to do so may lead to unexpected flight behavior or serious accidents. 4. Specifications Built-in Functions Basic Flight Modes Return-to-Home Modes Safety Features DJI GO App (DJI Lightbridge required) Supported DJI Equipment P-mode (Positioning); Atti mode / A-mode (Attitude); Sport mode; Manual mode Smart RTH; Low battery RTH (for DJI Intelligent Flight Batteries); Low voltage RTH (for other LiPo batteries); Failsafe RTH Failsafe mode; Low battery level warning (for DJI Intelligent Flight Batteries); Low battery voltage warning (for other LiPo batteries); Custom flight altitude and radius limits; No Fly Zones; Motor Redundancy (for 6 and 8 rotor platforms); Motor overload detection; Built-in double IMUs; Built-in data recorder Beginner mode; Auto takeoff and landing; Wireless flight controller configuration; Flight data OSD; Intelligent Flight Modes: Course Lock, Home Lock, Point of Interest (POI), Waypoints DJI aerial platforms (e.g. F550, S900, S000, S000+); DJI gimbal systems (e.g. Zenmuse X3 / X5 / X5R / XT, Z5 A7 / GH4 / 5D Ⅲ / BMPCC); DJI Intelligent Landing Gear; DJI Intelligent Flight Battery, iosd mini, iosd MARK II Optimized Flight Performance* (Subject to airframe type and payload) Hovering Accuracy (In P-Mode) Max Wind Resistance Max Yaw Angular Velocity Vertical: ±0.5 m; Horizontal: ±.5 m 0 m/s 50 /s Max Pitch Angle 35 Max Ascent Velocity Max Descent Velocity Electrical & Mechanical Rated Power Rated Peak Power 5 m/s 4 m/s 3.3 W 4.8 W Operating Temperature 4 to 3 F (-0 to 45 C) * Optimized Flight Performance parameters can be set in Assistant. Refer to the Appendix section of the user manual for the full specifications. Fly Safe It is important to understand basic flight More information at: guidelines for the safety of both you and those around you. Refer to the Disclaimer and Safety Guidelines for more information. This Quick Start Guide is subject to change without prior notice DJI. All Rights Reserved. No Fly Zones

9 N3 快速入门指南. 认识您的 N3 简介 N3 作为 DJI TM NAZA TM 系列第三代飞行控制系统, 内置双 IMU 并且可外部扩展高性能传感器, 结合全新一代的控制和 IMU 算法, 创造业界领先的可靠性和稳定性丰富的配件和 SDK 接口, 可满足航模爱好者和行业应用入门者的需求配合使用 DJI Lightbridge 高清图传, 可支持 DJI GO App, 获得先进的智能飞行功能 N3 飞行控制系统包含主控器 ( 内置双 IMU 数据记录仪和气压计 ) GNSS-Compass 模块, 电源管理模块 (PMU) 和 LED 模块 CHS LED 功能亮点多种飞行模式 P 模式 ( 定位 ) A 模式 ( 姿态 ) S 模式 ( 运动 ) 和 M 模式 ( 手动 ), 且其操控性能 (exp, 最大姿态角等 ) 可通过调参软件调整智能飞行配合 DJI Lightbridge 高清图传, 可使用 DJI GO App, 获得更多智能飞行功能高可靠性内置双 IMU 并支持外扩高性能传感器 ( 连接一套 A3 升级套件 ) 黑匣子内置 SD 卡数据启记录仪, 可用于记录飞行数据扩展配件使用 DJI DATALINK PRO, 无缝连接 DJI 地面站连接 D-RTK, 实现更精准定位 SDK 丰富的 SDK 接口, 可满足专业用途定制的需求关于 SDK 的开发, 请访问 : 06 DJI. All Rights Reserved. 7

10 N3 快速入门指南模块及端口说明 CHS 主控器 (FC). PMU PMU 模块 (9V A) 接口. LED LED 模块接口 3. M-M8 M-M8 电调 PWM 接口 iesc DJI 智能电调通信接口 5. RF DJI Lightbridge 接收机接口 6. FC 指示灯指示模块当前状态 7. CAN CAN Bus 接口 ( 预留扩展 ) 8. SBus 接收机接口 (S-Bus / DJI DR6) 9. F-F4 多功能 PWM 输出接口 0. F5-F8 多功能 PWM 输入 / 输出接口. API 串口通信接口 (SDK). EXP 扩展接口 ( 连接 A3 升级套件 ) 3. 主控器安装标记主控器安装朝向标记 3 LED GNSS-Compass 模块. GNSS-Compass 安装标记指向飞行器机头方向. GNSS-Compass 指示灯指示模块当前状态 LED 模块. 飞行状态指示灯指示飞行控制系统状态. Micro USB 飞行控制系统调试接口 3. CAN 扩展接口 CAN Bus 扩展接口 3 PMU 模块. ibat 智能电池通信接口 8 06 DJI. All Rights Reserved 电源指示灯指示当前供电状态 3. 3S-S 锂电池或 DJI 智能飞行电池接口 4. 9V A 连接主控器进行供电 5. CAN 连接 GNSS-Compass 模块

11 N3 快速入门指南. 安装准备请依据物品清单核对各部件和配件, 并下载用户手册和调参助手如果配备 DJI Lightbridge 高清图传, 请下载安装 DJI GO App, 以获得更多先进的智能飞行功能飞行控制系统的安装和使用具有一定的技术复杂度, 请务必下载并仔细阅读用户手册下载用户手册请访问官网产品专页下载 : PDF CHS 下载调参助手 DJI Assistant 请访问官网产品专页下载 : DJI Assistant 调参助手需使用 Win7 及以上系统或 Mac OS X 0.9 及以上系统下载 DJI GO App 请在软件商店或扫描下方二维码下载或使用移动设备访问以下网址 : 观看教学视频 DJI GO App 扫描二维码观看需配合 DJI Lightbridge 高清图传使用 DJI GO App 要求使用 ios 8.0 及以上系统或 Android 4.. 及以上系统自备设备使用 N3 时, 需自行准备飞行器遥控接收系统电调和电池等设备设备支持类型 : 多旋翼飞行器类型 : I4 X4 型四旋翼 ;I6 V6 Y6 IY6 型六旋翼 ;X8 I8 V8 型八旋翼接收机类型 : DJI Lightbridge ;DJI DR6;S-Bus 电调 : 输出 400Hz 刷新频率电池 : DJI 智能飞行电池 ;3S-S 锂聚合物电池支持 DJI 设备 : DJI 智能起落架 ;Zenmuse Z5 云台 ;D-RTK;DATALINK PRO;iOSD mini;iosd MARK II; 智能电调等 06 DJI. All Rights Reserved. 9

12 N3 快速入门指南 3. 使用指引安装指引请观看安装演示和模块连接等视频, 并仔细阅读用户手册安装章节 DJI Assistant 参数设置请观看软件调参的视频, 运行调参助手, 依照软件指引和内嵌说明完成参数设置 CHS 指示灯说明 LED 状态指示灯可显示系统状态, 详情请见用户手册附录章节务必严格按照要求进行安装并正确设置参数, 否则可能无法飞行甚至导致严重安全事故 4. 规格功能飞行模式 P 模式 ( 定位 );A 模式 ( 姿态 );S 模式 ( 运动 );M 模式 ( 手动 ) 返航功能智能返航 ; 智能低电量返航 (DJI 智能飞行电池 ); 低电压返航 ( 普通电池 ); 失控返航保护功能失控保护 ; 低电量保护 (DJI 智能飞行电池 ); 低电压保护 ( 普通电池 ); 高度距离限制 ; 特殊区域飞行限制 ; 输出动力缺失保护 ( 至少六旋翼 ); 动力保护 ; 内置双 IMU; 内置数据记录仪 ; 航向锁定 ; 返航锁定 App 功能 ( 需使用 DJI Lightbridge ) 新手模式 ; 一键起飞 / 降落 ; 远程参数设置 ; 飞行数据 OSD; 智能飞行模式 : 航向锁定, 返航锁定, 兴趣点环绕, 航点模式支持的 DJI 设备 DJI 飞行器, 如 F550,S900,S000,S000+ 等 ; 智能起落架 ; 智能飞行电池 ; Zenmuse X3 / X5 / X5R / XT, Z5 A7 / GH4 / 5D Ⅲ / BMPCC 云台 ;iosd mini,iosd MARK II 飞行特性 ( 受飞行器类型和负载影响, 部分参数在调参软件中可调 ) 悬停精度 (P-Mode) 最大抗风能力最大偏航角速度垂直方向 :± 0.5 m; 水平方向 :±.5 m 0 m/s 50 /s 最大倾斜角度 45 ( 默认 35 ) 最大上升速度最大下降速度电子机械特性额定功率额定峰值功耗 5 m/s 4 m/s 3.3 W 4.8 W 工作环境温度 -0 至 45 全部规格详情请见用户手册附录章节安全指引飞行安全认识对于您周围人群与环境的安全非常重要请务必仔细阅读免责声明和安全操作指引禁飞区详情请访问以下网址 : 本指南内容如有更新, 恕不另行通知 0 06 DJI. All Rights Reserved.

15 DJI Support DJI 技术支持 DJI 技術支援 DJI サポート DJI 지원 DJI Support Asistencia técnica de DJI Assistance DJI Assistenza DJI DJI-ondersteuning Suporte DJI Техническая поддержка DJI This content is subject to change. Download the latest version from If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. PHANTOM TM is a trademark of DJI. Copyright 06 DJI All Rights Reserved. Printed in China.

快速搜索关键词 PDF 电子文档可以使用查找功能搜索关键词例如在 Adobe Reader 中,Windows 用户使用快捷键 Ctrl+F,Mac 用户使用 Command+F 即可搜索关键词点击目录转跳

快速搜索关键词 PDF 电子文档可以使用查找功能搜索关键词例如在 Adobe Reader 中,Windows 用户使用快捷键 Ctrl+F,Mac 用户使用 Command+F 即可搜索关键词点击目录转跳 MATRICE 600 用户手册 V1.0 2016.04 快速搜索关键词 PDF 电子文档可以使用查找功能搜索关键词例如在 Adobe Reader 中,Windows 用户使用快捷键 Ctrl+F,Mac 用户使用 Command+F 即可搜索关键词点击目录转跳用户可以通过目录了