FSM1630-A9 manual V2

Size: px

Start display at page:

Download "FSM1630-A9 manual V2"

肠众倪
7 years ago
Views:

1 FSM1630 TYPE1 English 4 11

2 A B C D E F 2

3 G H I J K 3

4 ENGLISH instruction manual may present a risk of personal injury. Retain this manual for future refertechnical DATA ence. Using your appliance Do not direct steam at people, animals, electrical appliances or electrical Intended use outlets. Your Black & Decker steam mop has been designed for Do not expose to rain. sanitising and cleaning sealed hardwood, sealed laminate, Do not immerse the appliance in water. refreshing carpets. This appliance is intended for indoor Do not leave the appliance unattendhousehold use only. ed. Safety instructions Do not leave the appliance connected to an electrical outlet when not in use. Read Warning! Never pull the power lead to disconsafety warnings and nect the appliance from the socket. all instructions. Failure to Keep the appliance lead away from follow the warnings and instrucheat, oil and sharp edges. tions listed below may result in Do not handle steam cleaner with wet hands. ous injury. Do not pull or carry by cord, use cord When using mainsas a handle, close door on cord, Warning! powered appliances, basic cord around sharp corners or expose safety precautions, including the cord to heated surfaces. following, should always be foldo not use appliance in an enclosed electric shock, personal injury oil-base paint thinner, some mothand material damage. Read all of this manual carefully beor other explosive or toxic vapours. fore using the appliance. The intended use is described in this facturer. manual. The use of any accessory Do not use on leather, wax polished or attachment or the performance of any operation with this appliance velvet or other delicate, steam-sensiother than those recommended in this tive materials. FSM1630 TYPE1 Steam mop FSM1630 Type1 Voltage Power Tank capacity Weight Vac W ml kg

sanitising and cleaning sealed hardwood, sealed laminate, Do not immerse the appliance in water. refreshing carpets.

5 Do not use Warning! unsealed wood or unsealed have been treated with wax or may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions ENGLISH Care should be taken when using this appliance. DO NOT touch any parts which may become hot during use. Switch the appliance off and return the handle to the upright position before removing the water tank. upside down. This appliance is intended for indoor household use only. After use Unplug the appliance and allow to cool before cleaning. When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances. Never put descaling, aromatic, alcoholic or detergent products into the steam cleaner, as this may damage it or make it unsafe for use. Inspection and repairs If the home circuit breaker activates Unplug the appliance and allow to cool while using the steam function, disbefore performing any maintenance or continue product use immediately and repairs. contact the customer support centre. (Beware of the risk of electrical shock.) Before use, check the appliance for damaged or defective parts. Check for The appliance emits very hot steam to breakage of parts, damage to switches sanitize the area of use. This means and any other conditions that may afthat the steam head, cleaning pads fect its operation. and carpet attachment get very hot Regularly check the power lead for during use. damage. Caution! Always wear suitable Do not use the appliance if any part is shoes when using your steam mop and when changing the accessories on damaged or defective. Have any damaged or defective parts your steam mop. Do not wear slippers repaired or replaced by an authorized or open toed footwear. repair agent. The lid may become hot during use. Never attempt to remove or replace Steam may escape from the appliance during use. this manual. 5

We also recommend that you check the use and care instructions ENGLISH Care should be taken when using this appliance. DO NOT touch any parts which may become hot during use.

6 ENGLISH Safety of others This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance. Residual risks. Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: 6 Injuries caused by touching any moving parts. Injuries caused by touching any hot parts. Injuries caused when changing any parts or accessories. Injuries caused by prolonged use of the appliance. When using any appliance for prolonged periods ensure you take regular breaks. Electrical safety Warning! This prod@ uct must be earthed. Always check that the power supply corresponds to the voltage on the rating plate. Power plugs must match the outlet. Never modify the plug in any way. outlets will reduce risk of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Extension cables & Class 1 product A 3-core cable must be used as your appliance is earthed and of Class 1 construction. Up to 30m (100 ft) can be used without loss of power. Labels on the appliance The following pictograms are shown on the tool: Warning! To reduce the risk of injury, the user must read the instruction manual. Warning! Danger of scalding.

Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance. Residual risks.

7 ENGLISH Features This appliance includes some or all of the following features. 1. ON/Off switch 2. AutoselectTM button 3. Removable water tank 4. Handle 5. Steam head 6. Steam head cleaning pad 7. Delta head cleaning pad 8. Resting mat 9. Carpet glider 10. Bottom cable tidy hook 11. Top cable tidy hook 12. Cable management clip Assembly Warning! Before attempting any of the following operations, make sure that the appliance is switched off and unplugged and that the appliance is cold and does not contain any water. Attaching the handle (Fig. A) Slide the bottom end of the handle (4) into the top end of the steam mop body (13) until it clicks into place. Attaching the steam head (Fig. B) Slide the bottom end of the steam mop body (13) onto the steam head (5) until it clicks into place. The steam head can be removed from the Steam mop body by pressing the steam head release button (14) and pulling the steam mop body (13) off the steam head (5). Attaching the water jug (Fig. C) Clip the water jug (3) onto the handle (4). Slide the water jug (3) down into the Steam mop body Attaching a cleaning pad (Fig. D) Replacement cleaning pads are available from your Black & Decker dealer:- (cat. no. FSMP20-XJ). Steam head cleaning pad - cat. no. FSMP20-XJ). Delta head cleaning pad - cat. no. FSMP30-XJ (FSM1630 Only). loop side facing up. Lightly press the steam mop down onto the cleaning pad (6 or 7). Caution! Always place your steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. Removing a cleaning pad (Fig. E) Caution! Always wear suitable shoes when changing the cleaning pad on your steam mop. Do not wear slippers or open toed footwear. Return the handle (4) to the upright position and turn the steam mop OFF. Place the steam mop on the resting mat and wait until it Place the front of your shoe onto the cleaning pad removal Lift the steam mop up off the cleaning pad. Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. Attaching the carpet glider (Fig. F) Lightly press the steam mop down onto the carpet glider (9) until it clicks into place. Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. Removing the carpet glider (Fig. F) Caution! Always wear suitable shoes when changing the carpet glider on your steam mop. Do not wear slippers or open toed footwear. Return the handle (4) to the upright position and turn the steam mop OFF. Place the steam mop on the resting mat and wait until it Place the front of your shoe onto the carpet glider removal Lift the steam mop up off the carpet glider (9). Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. The Delta Head (Fig. G) This Steam Mop incorporates a built in delta head which enables you to access into tight corners and narrow gaps. Caution! Always wear suitable shoes when accessing the delta head on your steam mop. Do not wear slippers or open toed footwear. Return the handle (4) to the upright position and turn the steam mop OFF. Place the steam mop on the resting mat and wait until it Place the front of your shoe onto the steam head removal tab (18) and press down gently. Lift the delta head (17) up off the steam head (5). Fit the delta head cleaning pad to the bottom of the delta head. 7

Before attempting any of the following operations, make sure that the appliance is switched off and unplugged and that the appliance is cold and does not contain any water. Attaching the handle (Fig.

8 ENGLISH Note: head to the steam head. delta head clicks into place. Caution! Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. AutoselectTM Technology (Fig. J) TM button (2) which shows various cleaning applications. They are used to select the correct operating mode for your particular cleaning operation. Using AutoselectTM, choose from one of the following applications by pressing the autoselect button (2) until the required setting is selected: Wood/Laminate Filling the water tank (Fig. H) The watertank on your steam mop is removable for convithis Steam Mop incorporates an anti-calc system to help prolong the life of the system. Note: Fill the water tank with clean tap water. Note: In areas of very hard water, the use of de-ionised water is recommended. Remove the water tank (3). (20). Fill the water tank (3) with water. Warning! Your water tank has a 0.5 litre capacity. Do not over Note: Use Important! This unit will kill 99.9% of bacteria & germs when Switching on and off To switch the appliance on, press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up. Note: ervoir will glow red. Once the steam mop is ready to use the water reservoir will glow blue. To switch the appliance off, press the ON/OFF button (1). Caution! Never leave the steam mop in one spot on any surface for any period of time. Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. Caution! Always empty the steam mop after use. Stone/Marble Tiles/Vinyl The steam mop will select the correct volume of steam required for your particular cleaning operation. Note: Always check you are using the correct setting before using your steam mop. For convienience the steam mop will remember the last setting you chose. Steam burst (Fig. I) The steam mop is equipped with a steam bust button to aid in the removal of stubborn marks and stains. During use, press the steam bust button (21) to apply extra cleaning power. Note: The stem burst will last for 10 seconds then the stem mop will return to the chosen setting. Hints for optimum use 8 General Caution! cleaning pad. During use you can use the cable mamagement clip (11) to keep your cable out of the way of the work area.. mop. The easiest way to use the machine is to tilt the handle to a 45 angle and clean slowly, covering a small area at a time. Do not use chemical cleaners with your steam mop. To can use the steam burst button to apply extra steam to the area or pre-treat with a mild detergent and some water before using the steam mop.

J) TM button (2) which shows various cleaning applications. They are used to select the correct operating mode for your particular cleaning operation.

9 ENGLISH Steam cleaning loop side facing up. Raise the steam mop off the resting mat (8) and lightly press it down onto the cleaning pad (6 or 7). Place the steam mop on the resting mat. Connect the steam mop to the mains. Press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up. Press the AutoselectTM button (2) till the required setting is reached. Pulling the handle (4) back will activate the steam pump. After a few seconds steam will start to come out of the steam head. It takes a few seconds for steam to enter the cleaning pad. The steam mop will now glide easily over the surface to be sanitised/cleaned. Press the AutoselectTM button (2) to the Wood/Laminate setting. Pulling the handle (4) back will activate the steam pump. After a few seconds steam will start to come out of the steam head. Push and pull the steam mop slowly across the carpet to thoroughly refresh each section. Note: During use you may turn off the steam pump by returning the handle (4) to the upright position, this convenient feature will allow you to place the steam mop on the resting mat (8) so that you may move items of furniture with out the need to switch the appliance off. handle (4) to the upright position and turn it OFF, place it on the resting mat (8) and wait until the steam mop cools Caution! It is important to monitor the water level in the water thoroughly steam clean each section. Note: During use you may turn off the steam pump by returning the handle to the upright position, this convenient feature will allow you to place the steam mop on the resting mat for a short time so that you may move items of furniture, then continue cleaning without the need to switch the appliance off. handle (4) to the upright position and turn it OFF, place it on the resting mat (8) and wait until the steam mop cools Caution! It is important to monitor the water level in the water return the handle (4) to the upright position and turn the steam mop OFF. Unplug the unit from the electrical wall outlet, Caution! Never leave the steam mop in one spot on any surface for any period of time. Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. Carpet refreshing loop side facing up. Raise the steam mop off the resting mat (8) and lightly press it down onto the cleaning pad (6 or 7). Lightly press the steam mop down onto the carpet glider (9) until it clicks into place. Place the steam mop on the resting mat. (8) Connect the steam mop to the mains. Press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up. return the handle (4) to the upright position and turn the steam mop OFF. Unplug the unit from the electrical wall outlet, Caution! Never leave the steam mop in one spot on any surface for any period of time. Always place the steam mop on the resting mat (8) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use. After use (Fig. J & K) Return the handle (4) to the upright position and turn the steam mop OFF, Place the steam mop on the resting mat (8) and wait until Unplug the steam mop from the electrical wall outlet. Empty the water tank (3). Remove the cleaning pad (6 or 7) and wash it ready for next use. (Take care to follow the wash care instructions printed on the cleaning pad). Wrap the supply cable around the cable tidy hooks (10 & 11). Note: The top cable tidy hook (11) rotates to easily release the cable ready for next use. Clip the supply cable onto itself using the cable tidy clip (22) close to the plug. Place steam mop on the resting mat (8) for storage. Note: With the handle (4) in the upright position, the cable neatly wrapped around the cable tidy hooks (10 & 11) and secured with the cable tidy clip (22) your steam mop will stand on its own for storage. Alternatively there is a hanging bracket (23) built into the hand grip (24) which will allow your steam mop to be hung from a suitable hook on the wall. Always ensure that your wall hook is capable of supporting the weight of the steam mop safely. 9

Pulling the handle (4) back will activate the steam pump. After a few seconds steam will start to come out of the steam head. It takes a few seconds for steam to enter the cleaning pad.

10 ENGLISH Maintenance and cleaning Your Black & Decker corded appliance has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper appliance care and regular cleaning. Warning! Before performing any maintenance or cleaning on corded appliances switch off and unplug the appliance. Wipe your appliance over using a soft damp cloth. For stubborn marks you can use a mild solution of soap and water to dampen your cloth. Care of the cleaning pads Wash care instructions - No fabric conditioner - Allow to dry fully before re-use. Caution! Follow the cleaning instructions printed on the label of the cleaning pad. Protecting the environment Z Separate collection. This product must not be disposed of with normal household waste. needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. z Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. 10 Service Information Black & Decker offers a full network of company-owned and authorized service locations throughtout Asia. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable product service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest to you. NOTE Black & Decker's policy is one of continuous improvement to our products and, as such, we reserve the right to change product specifications without prior notice. Standard equipment and accessories may vary by country. Product specifications may differ by country. Complete product range may not be available in all countries. Contact your local Black & Decker dealers for range availability.

Before performing any maintenance or cleaning on corded appliances switch off and unplug the appliance. Wipe your appliance over using a soft damp cloth.

11 FSM1630 TYPE1 FSM1630 TYPE1 V ac W 1600 ml 500 kg 2.8 Black @ 11

12 Black & Decker Autoselect A 413 B C D Black & Decker FSMP20-XJ FSMP20-XJ FSMP30-XJ FSM E 4 15

13 84 F 9 84 F G H % Autoselect J Autoselect 2 Autoselect 2 I 13

14 Autoselect Autoselect J K

15 Black & Decker Black & Decker Black & Decker Z Black & Decker z Black & Decker Black & Decker Black & Decker 15

16 /2013

ManualsLib - Makes it easy to find manuals online!

ManualsLib - Makes it easy to find manuals online! www.blackanddecker.com FSM1630 TYPE1 English 4 11 A B C D E 2 F G H I J K 3 ENGLISH FSM1630 TYPE1 Steam mop TECHNICAL DATA FSM1630 Type1 Voltage V ac 220-240 Power W 1600 Tank capacity ml 500 Weight kg