Sliding Bearing Specialist 嘉善方木轴承有限公司 FangMu Hardware Co.,Ltd. HENGY FANGMU PRECISION BUSHING&WEAR MECHINERY CO., PLATE LTD.

Transcription

1 嘉善方木轴承有限公司 FangMu Hardware Co.,Ltd. HENGY FANGMU PRECISION BUSHING&WEAR MECHINERY CO., PLATE LTD.

2

3 公司简介 INTRODUCTION 嘉善方木轴承有限公司是一家专业从事各类无油轴承, 滑块和机械零配件的中小型企业, 公司集研发 生产与销售为一体, 产品远销德国, 意大利, 美国, 俄罗斯, 澳大利亚以及中东 东南亚国家和地区, 在公司几年来建设世界销售网的发展和实践中, 吸取国内外同行的经验及理念, 在非标件的研发与制造方面处于领先地位, 公司始终坚信质量是企业的生命, 创新是企业的动力, 愿我们的产品与服务能为您效劳, 选择方木就是选择专业与信赖! FangMu is specialized in all kinds of oiless bearings, sliding plates and mechanical spare parts of small and medium-sized enterprises.fangmu integrates research and development production and sales as one, the products are sold far to Germany, Italy and the United States, Russia, Australia, and the Middle East, Southeast Asian countries and regions,we are constructing our world sales net. In the many years of development and practice, we learn of the experience and philosophy from domestic and international counterparts, now FangMu in the lead of non-standard parts of research and manufacturing. FangMu always believe that quality is life, originality is power, wish our products and service can do for you. FangMu at your side.

4 固体镶嵌型自润滑轴承 Cylindrical Oilless Bushing 产品应用领域 Product Application 高温 High Temperature 钢铁厂 熔矿炉 干燥设备 烘烤炉 热控制器 汽车制造 Automobile 冲床模具 焊接组织 烤漆与干燥线 金属输送带 工具机 防水 Waterproof 水坝闸门 沈水泵浦 流体电门结构 近海结构 船坞及淤泥机设备 船舶 Boat 甲板起重机 起锚机 舱口盖 方向舵臂 起重机械与吊环设备 抗化学 Chemical Resistance 化学工厂 电镀设备 废水处理设备 染色机械 油与化学药品提炼设备 风力 Wind Power 风力发电 新能源 重工业 Heavy Industry 钢管工厂机械 轮胎与造纸厂 发电厂 模具射出机械之连接曲肘 建筑 采矿 装载 Construction 搅拌机 研磨机 粉碎机 建筑机械 采矿设备 连杆轴承 动力轴套 桥梁和升降轨 Bridge 桥梁轴承 梁 桥架 吊桥 核能相关反应器 蒸汽发生器 1

5 固体镶嵌型自润滑轴承 Cylindrical Oilless Bushing 典型用途 免维护 自润滑 无需加油 高承载 滑动面摩擦系数极低 抗磨损性能优越 使用温度 -4 ~ +3 良好的抗化学抗腐蚀性能 特殊产品可按用户的图纸要求生产 硬度 21-24HB, 使用寿命比普通大至少一倍 Advantages of MXZ5# Slide Elements: Maintenance free Wear resistant Low frictional resistance Resistant against temperatures up to approx. 3 (approx.572 o F) No impurity through discharge of lubrication Environmentally friendly Corrosion resistant Insensitive to impact stress Specially suited for oscillating slide motions Stick, slip free sliding Long life 重载低速无法加油的工况场合 汽车模具滑动导向件 导套 滑块 重载 低速自润滑, 如水坝工作 孤门支铰轴承 事故门轴承, 水轮机轴承等 使用于高温场合, 如钢铁厂 冶金设备, 轧机 输送辊道 高温鼓风炉 烘干炉用轴承 汽机车工业 覆盖件冲压模 组装流水线 传送带等用轴承 其它工业用轴承 工程机械 注塑机 各种高精度模具等 化工机械 食品机械 造纸机械 纺织印染机械等需耐腐蚀耐水浸润场合 替代传统的铜套 滑块 无需加油润滑 Typical Aplications: Automotive industry-tool support, die Injection molding-machines and tool Mechanical machine construction Steel and/or rolling mills Machine building-and stone industry Weir plants / ship building Heavy duty machine industry Welding engineering Packaging industry Lift and/or conveying engineering 2

6 目录 ONTENTS JDB-1 拉油槽轴承 Oil grooves bronze bearing Page 4 JDB-2 镶嵌式固体润滑轴承 Solid-lubricant inlaid bearing Page 5 SF-1 碳钢基自润滑轴承 Carbon Steel Self-lubricating bearing Page 31 SF-2 碳钢基边界无铅自润滑轴承 Marginal Pb-free Self-lubricating bearing Page 41 JF 双金属自润滑轴承 Bimetallic self-lubricating bearing Page 45 FB9 单金属系列自润滑轴承 Mometallic self-lubricating Bearings Page 5 FU 粉末冶金轴承 Sintered bearings Page 56 3

7 JDB 拉油槽轴承 Oil grooves bronze bearing JDB 拉油槽轴承 Oil grooves bronze bearing 材料表 Material Sheets Swedish Standard SS Norwegian Standard NS British Standard BS 14 SS 524 NS1653 LG2 German Standard DIN-Norm Rg5 *Rg7 American Standard UNS UNS C836 CEN/ISO Standard ISO CuSn5Pb5Zn5 SS 5428 NS1636 PB13 CuSn6 C519 CuSn6 SS 5443 NS1651 CT1 PB1 SS 5465 NS1658 PB2 SS 564 NS1654 LB2 AB1 CuSn1 C927 CuSn1 CuSn12 CuSn12Pb s CuPb1Sn *CuPb15Sn SS NS AB 2 CuAl1Ni SS 6234 UNS C96 UNS C937 UNS C954 UNS C958 CuSn12 CuSn1Pb1 CuAl1Fe4 CuAl1Ni5Fe4 G3 Cu Zn25 Al5 CuSn7Ni5Zn3 HTB3 SS 5238 *NS16565 *HTB1 SS 5256 *NS16565 *HTB1 *CZ114 Cu Zn25 Al5 (SoMs F75) *Cu Zn34Al2Mn3 (SoMs F45) *Cu Zn35 Ni2 (SoMs F45) CuZn4Al2 (SoMs 58 Al2) UNS 863 CuZn25Al6Fe3Mn3 *C865 CuZn35Mn2AlFe *C865 CuZn35Al1 *C674 油槽样式 Oil Groove 4

8 JDB 镶嵌式固体润滑轴承 Solid-lubricant inlaid bearing JDB 镶嵌式固体润滑轴承 Solid-lubricant inlaid bearing 该产品以高强度铜合金为基体, 镶嵌特殊配方的固体润滑剂和润滑油, 在摩擦过程中逐步释放润滑油和固体润滑剂 产品被广泛应用于注塑机, 汽车模具 工程机械 食品机械 水轮机轴承等 JDB Solid- lubricant inlaid bearing use high grade metal alloys as their base material, inlaid graphite and grease during the process of friction, it will release solidlubricant and lubricant oil automatically. The products are widely used in injection molding, automobile mold,engineering machine, food machinery and water turbines, etc. 合金材料 :Metal Material 对应牌号 Corresponding brands 型号 Type JDB-1 JDB-2 JDB-3 JDB-4 JDB-5 国际牌号 GB China Brands GB 国际 ISO1338 International ISO1338 德国 DIN Germany DIN 日本 JIS Japan JIS 美国 ASTM/UNS America ASTM/UNS 英国标准 (BS) England Standard ZCuZn25 Al6Fe3Mn3 GCuZn25 Al6Fe3Mn3 G-CuZn25 Al5 ZCuZn25 Al6Fe3Mn3 GCuZn25 Al6Fe3Mn3 G-CuZn25 Al5 ZCuAl9Fe4 Ni4Mn2 GCuAl1 Fe3Ni5 G-CuAl1 Ni GCr15 HT25 B1-1Cr6 - HBsC4 HBsC4 AlBC3 SUJ2 FC25 C863 C863 C Class4 HTB2 HTB2 AB2 - - 技术参数 :Technical Data 性能指标 Performance index 型号 Type 最大动承载 P(N/mm 2 ) Max Move Load Capacity 最大线速度 V(m/min) Max Sliding Speed 最高 PV 值 (N/mm 2 m/min) Max PV Value Limit 密度 ρ(g/cm 3 ) Density 抗拉强度 (N/mm 2 ) Tensile Strength 延伸率 (%) Elongation 硬度 (HB) Hardness 最高使用温度 Max Working Temperature 摩擦系数 μ Friction coefficient JDB-1 JDB-2 JDB-3 JDB-4 JDB >75 >78 >5 >15 >25 >12 >4 >1 - - >21 >25 >15 HRC>55 > 油润滑 :.3 Oil Lubrication:.3 干摩擦 :.16 Dry Friction:.16 5

9 JDB 镶嵌式固体润滑轴承 Solid-lubricant inlaid bearing 材料合金化学成份 :Alloy Chemical Compositions 化学元素 Chemical elements JDB-1 JDB-2 JDB-3 JDB-4 JDB-5 Cu(%) Rest Rest Rest - - Sn(%) Zn(%) Ni(%) Al(%) Fe(%) Rest - Mn(%) ~.4 - Cr(%) ~ C(%) ~1.5 - Si(%) ~.35 - 固体润滑剂 :Solid Lubricants 固体润滑剂代号 Codes Of Solid Lubricants SM1 SM2 SM3 主要成份 Main Compositions 石墨 Graphite 石墨 + 二硫化钼 Graphite+MoS2 聚四氟乙烯 + 石墨 + 石蜡 PTFE+Graphite+Olefin 特性 Features 很好的化学稳定性, 使用温度 <25 Good chemical stability, temperature<25 很好的耐磨性和化学稳定性, 使用温度 <4 Good wear performance and chemical stability, temperature<4 极低的摩擦系数和很好的水润滑性, 使用温度范围 -4~8 Lowest friction coefficient and good water lubrication,temperature Rang -4~8 适用场合 Application Place 一般用 ( 大气 ) General(atmosphere) 高温 高载荷 High temperature high load capacity 海 ( 水 ) 用, 高压用 Seawater use, high pressure use 镶嵌式固体润滑轴承的特性 The Advantages of The Solid-lubricant Inlaid Bushing 1 无给油可使用 Dry operation. 2 高载荷 低转速的情况, 仍可发挥优越的性能 Can be Performed well with high load and low speed. 3 往返运动 摇摆运动 起动停止频繁等油膜形成困难的场所, 仍可发挥优越的耐磨性 Rreciprocating motion, wagging motion, start and stop frequently are difficulty for keeping oil surface. It still may play advantageous of wear-resistance. 4 优越的耐药品性及耐蚀性 Excellent chemical resistance and low wear. 5 设计灵活 简单 方便, 丰富的标准品, 可配标准轴心使用 Flexible,simple,convenient and abundant designing of standard, can be choosed by standard axes. 6

10 JDB 自润轴套 Oilless Cylindrcal Bushes 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite ~4 d8 e7 R1~3 R1~3 1.6 f7 3.2 df7 Dm6 H7 Mating Shaft L 1.6 Sliding direction Mating Housing IDF7 ( 内径 ) ODm6 ( 外径 ) L

11 JDB 自润轴套 Oilless Cylindrcal Bushes IDF7 ( 内径 ) ODm6 ( 外径 ) L 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 8

12 JDB 自润翻边轴套 Oilless Flange Bushes 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite IDE7 ( 内径 ) ODr6 ( 外径 ) F F 12F F 122F L F 132F F 142F F 152F 1525F 153F F 162F 1625F 163F F 22F 225F 23F 24F F 252F 2525F 253F 254F F 325F 33F 335F 34F 35F F 3135F F 353F 354F 355F F 43F 44F 45F F 454F 455F 456F F 54F 55F 56F F 556F F 65F 68F F F 78F F F 88F 81F F 98F F 11F F 121F +.63 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 9

13 JTW 止推垫片 Oilless Thrust Washers 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite 1 o d D 1 D d 1 Sliding direction T -.1 规格 Standard No. d D T 螺栓 Bolt D 1 数量 Q'ty 尺寸 size d 1 JTW JTW JTW JTW M JTW JTW JTW-16N JTW M JTW-2 M JTW-2N JTW M JTW-25N JTW M5 6 JTW JTW JTW M6 7 JTW JTW JTW JTW JTW M8 9 4 JTW JTW JTW JTW M1 11 JTW 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 1

14 H 1 JDB-4 钢基固体润滑轴承 Steel Solid-Lubricant-Embedded Bearings 应用特点 Application JDB-4 以钢基镶嵌轴承, 是加强型产品, 具有较高的抗压性能, 在工作时能够排出润滑颗粒, 使轴与套之间产生一层隔膜, 起到了比单体油润滑更抗咬合的优点, 在起重机械的支撑部位特别适应 例如 : 卷场机支撑, 吊车支撑, 但不宜在水中或酸碱场合使用 JDB-4 is made of reinforced material-steel Gcr15 with solid lubricant embedded in it. Its good performance of high crash strength can be shown in supporting position of hoisting Machine. e.g. support part of windlass and crane. It can not use in water or in acid/alkali condition. 技术参数 Technical Data 代号 Grade JDB-4 材料 Materiai 钢 + 石墨 GCr15+Graphite 最大承载 静承载 Static 2N/mm 2 Max. Load 动承载 Dynamic 1N/mm 2 最大线速度 干 Dry.6m/s Max. Speed 润滑 Lubrication 1.2m/s 最高 PV 值 ( 润滑 ) Max. PV (Lubrication) 1.2N/mm 2 m/s 屈服强度 Yeild Strength 4N/mm 2 抗拉强度 Tensile Strength 3N/mm 2 合金硬度 Hardness HRC 5~6 延伸率 Elongation % 15% 最高使用温度 Temp. Limit -1 ~+3 摩擦系数 Friction Coefficient μ.5~.2mm 润滑方式 Solid Lubricant 固体润滑剂 + 油槽 Solid Lubricant+Oiling Grooves 装配座孔 H7 相配轴径 e7 或者 f7 公差配合 Mating Tolerance Pilot Saddle Bore (H7) in Collaboration With Shaft Diameter (e7 or f7) HGB25 自润导向套 Oilless Guide Bushes R2 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite 1 K 3.2 材质 Material FC 铸铁 + 石墨 HT25#+ Graphite φf (H7) φd R3 φd (js6) φc φg C.5 φe C1 C.5 C L -.3 项目代号尺寸 ΦF ΦD Φd H L ΦC ΦE ΦG K 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 11

15 JNA 自润导向套 Oilless Guide Bushes 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite 规格 Standard No. D1 H6 D2 g6 D3 D4 L1 L2 L3 R1 JNA JNA JNA JNA JNA JNA JNA JDBB 自润翻边轴套 Oilless Flange Bushes 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite 规格 Standard No. φd E7 φd r6 φa L1 L JDBB JDBB 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings JDBB JDBB JDBB JDBB JDBB JDBB

16 JGB 自润滑导向套 Oilless Guide Bushes 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite Stanard No. 规格 φd G6 φd m6 L L1 M Stanard No. 规格 φd G6 φd m6 L L1 M JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB JGB 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF

17 JGBF 自润滑翻边导向套 Oilless Flanged Guide Bushes 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite Stanard No. 规格 φd G6 φd m6 φf T L L 1 Stanard No. 规格 φd G6 φd m6 φf T L L 1 JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF JGBF

18 JEGB, JEGB-K 射出座导套 Oilless Ejector Guide Bushes 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite Stanard No. 规格 φd G6 φd h6 φf L L 1 L 2 L 3 JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K JEGB-K 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 15

19 JSLB 自润翻边轴套 Oilless Flange Bushes 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite T1 T2 D1 D2 D3 D L Code D Code JSLB JSLB JSLB 9 17 JSLB JSLB 9 22 JSLB JSLB 9 27 JSLB JSLB 9 36 JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB 2 66 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. T1 T2 D1 D2 D3 D L Code D Code JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB JSLB 3 36 JSLB JSLB 3 46 JSLB JSLB 3 56 JSLB JSLB 3 56 JSLB JSLB 3 76 JSLB JSLB 3 86 JSLB JSLB 3 96 JSLB JSLB JSLB JSLB JSLB JSLB 4 56 JSLB JSLB 4 66 JSLB JSLB 4 76 JSLB JSLB 4 86 JSLB JSLB 4 96 JSLB JSLB JSLB JSLB JSLB JSLB JSLB

20 JSL L 型自润滑板 Oilless L Guide Plate L 2 a b c d 2 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite Sliding directions A W(2) B W(3) C W(45) R< R<1 R< 规格 Standard No. W L 螺孔 Bole Hole Bolt a b c d 螺孔 Size 数量 Number Type JSL JSL M8 3 A JSL JSL JSL JSL B JSL M1 JSL JSL JSL C JSL 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 17

21 \\ \\ \\ \\ JSP 滑板尺寸 Oilless Sliding Plate 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite W=18,28,38,48 A B A L W=35,5 A W=75 A W 4-C1 B C D E L B C D E L A W 4-C1 A W 4-C R2 R2 R 了.25 1 了.25 型号规格 Standard No. W L A B C D E 平头螺钉 Flat Head Screw 数量 No. of Holes JSP JSP JSP JSP M6 JSP JSP JSP JSP JSP JSP JSP M8 JSP JSP JSP JSP JSP JSP JSP M6 JSP JSP JSP JSP JSP JSP JSP JSP JSP JSP M8 JSP JSP JSP JSP JSP JSP 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 18

22 JESW 自润滑板 Oilless Wear Plate A R2~3 B 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite W W b L R2~3 b L 1.6 φ R3 R φ11 C3 all around 代号 W L a b 倒角 JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW JESW A B 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 19

23 39D 863 自润滑板 Oilless Wear Plate 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite Slide Direction b b2 Graphite L2 L3 L Code 型号 39D b -.2 L1 -.2 b2 ±.2 L2 ±.2 L3 ±.2 L4 ± M D D D D D D M D D D D D M D D D D D D M D D D D D D D D D M D D D D D D D D D D M D D D D D M D D D Bolt Screw Holes 螺丝孔 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 2

24 DCBS/DCBSL V 型导板 Cam Slide Guide 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite 6.3 L P(n=2) 2-φeH7 dowel pin hole B P1( n 3) A φd φd (Counterbore) F G C2 All around W± J φeh7 6.3 a B A a E ±.25 F P2 ±.2 n is the number of bolt holes. b H Section A-A 6.3 Section B-B Slide Direction bolt hole W d D Code 型号 W L H P P1 n P2 E F G DCBS DCBSL 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 21

25 DCBSP/DCBSPL V 型导板 Cam Slide Guide 材质 Material S45C 钢基 +HRC L P( n=2) 2-φeH7 dowel pin hole P1( n 3) φd φd(counterbore) A 1.6 G Section A-A G C2 All around W W± φeh7 heh7 h a P2 ±.2 A b a 1.6 G E H G n is the number of bolt holes. The dowel hole effective depth is 15 mm. bolt hole W d D UTotal height of Combination DCBS and DCBSP W H Code 型号 W L H P P1 n P2 E G DCBSP DCBSPL 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 22

26 R3 R3 DSPW/DSPS 凸轮行程滑板 Cam Stroke Plate DSPW DSPS CuZn25Al6Fe3Mn3+ Graphite 高力黄铜 + 石墨 S45C 钢基 +HRC C6 15 R3 6.3 W W1± C6 15 R3 6.3 W W1±.2 2 Φ Φ 2 Φ Φ R3 R3 R3 L1±.2 L2 R3 L1±.2 L2 L L R15 R C2 R5 C2 3 R5 3 T±.1 T±.1 2-C2 2-C2 Code 型号 W L T W 1 L 1 L 2 DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS DSPW/DSPS 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 23

27 DCPRB/DCPRBS DPGPC 自润导板 Cam Pad Guide Plate 材质 Material 高力黄铜 + 石墨 CuZn25Al6Fe3Mn3+ Graphite L W h7 W1± φd1h7 φd S2 6.3 (Self-Lube Range) S1 2 (Self-Lube Range) L 2-R2 Sliding Direction Code 型号 W h7 L 1 L 2 S 1 S 2 W 1 d d 1 DPGPC DPGPC DPGPC DPGPC DPGPC DPGPC DPGPC DPGPC DPGPC DCPRB/DCPRBS DCRPB DCRPBS CuZn25Al6Fe3Mn3+ Graphite 高力黄铜 + 石墨 S45C 钢基 +HRC 55 Sliding Direction Code 型号 W L S L1 L2 W1 T1 d1 d2 DCRPB/DCPRBS DCRPB/DCPRBS DCRPB/DCPRBS 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 24

28 1.6 W h7 G 2-C3 S (Range of induction hardening) 1.6 G L1 L2 L T t DGBZ 自润外导板 Oilless Wear Plate 材质 Material 钢基 +HRC 4 S45C W= 1, 12, C3 S (Range of induction hardening) 4-R5 W = 5 and R5 W h7 W1 W2 M R L1 L2 L W= 18 2-C3 1.6 G φd 1.6 L3 S (Range of induction hardening) 4-R5 R2 15 φd 3-C3 1 for W = 5 and for W = 1 to 18. W h7 W1 W2 M L1 L2 L Sliding Direction Code 型号 W L W h7 L 1 L 2 L 3 W 1 W 2 D d t e s T DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ DGBZ 注 : 除以上规格尺寸外, 可按客户图纸制造 Note: In addition to the above specifications of size, manufactured according to customer drawings. 25

29 自润滑轴承 Self-lubricating Bearing 1. 聚四氟乙烯与铅的混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.PTFE with lead 2.Porous bronze 3.Steel backing 4.Tin-plating SF-1 碳钢基自润滑轴承 Carbon Steel self-lubricating bearing 该产品以优质低碳钢为基体, 中间烧结球形青铜层, 表面轧制聚四氟乙烯和铅的混合物 它具有较好的自润滑 耐磨损 摩擦系数低 走合性能好 低噪音等性能, 产品广泛应用于各种机械的滑动部位, 如纺织机 印刷机 液压搬运车 烟草机 健身器 农业机械等 SF-1 Carbon Steel self-lubricating bearings used high quality low-carbon steel plate as base, sintered porous bronze as its interlayer and the Compound of PTFE and Lead as its surface. It offers the property of good self-lubrication, low wear, low friction good sliding characteristics, low noise. It has been widely applied to various mechanical sliding positions, such as textile machinery, printing machinery, hydraulic pressure transit vehicle, tobacco machinery, gymnastic instrument and agricultural machinery etc. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V 干摩擦 Dry friction 2.5m/s Max Sliding Speed 油润滑 Oil lubrication 5.m/s 最高 PV 值 干摩擦 Dry friction 3.6N/mm 2 m/s Max PV Value Limit 油润滑 Oil lubrication 5N/mm 2 m/s 摩擦系数 μ 干摩擦 Dry friction.8~.2 Friction coefficient 油润滑 Oil lubrication.2~.7 使用温度 Working temperature -195 ~+28 导热系数 Thermal conductivity 42W/m K 热膨胀系数 Coefficient of thermal expansion /K 1. 聚四氟乙烯与纤维混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.PTFE with fibre 2.Porous bronze 3.Steel backing 4.Tin-plating SF-1W 碳钢基无铅自润滑轴承 Carbon Steel Pb-free self-lubricating bearin 该产品与 SF-1 具有相同结构和使用性能, 同时它具有环保的特点 产品广泛应用于汽车 食品工业机械 制药机械 饮料机械 医疗设备等绿色工业场合 Carbon Steel Pb-free self-lubricating bearing which is in the same structure and properties as SF-1. Meanwhile it is characterized by environmental protection.it has been widely applied to automobile, food-processing machinery, pharmacy machinery, beverage machinery, medical equipment etc. On green industry occasions. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V 干摩擦 Dry friction 2.5m/s Max Sliding Speed 油润滑 Oil lubrication 5.m/s 最高 PV 值 干摩擦 Dry friction 3.6N/mm 2 m/s Max PV Value Limit 油润滑 Oil lubrication 5N/mm 2 m/s 摩擦系数 μ 干摩擦 Dry friction.8~.2 Friction coefficient 油润滑 Oil lubrication.2~.7 使用温度 Working temperature -195 ~+28 导热系数 Thermal conductivity 42W/m K 热膨胀系数 Coefficient of thermal expansion /K 26

30 自润滑轴承 Self-lubricating Bearing 1. 聚四氟乙烯与亲油性纤维混合物 2. 球形青铜粉 3. 铜背 1.PTFE with Fiber 2.Porous bronze 3.Bronze backing SF-1B 铜基无铅自润滑轴承 Bronze Pb-free self-lubricating bearings 该产品以特殊配方铜合金为基体, 中间烧结球形青铜层, 表面轧制聚四氟乙烯和亲油性纤维的混合物 它具有较好的自润滑 耐磨损 摩擦系数低 耐腐蚀等性能, 产品广泛应用于冶金机械 连铸轧机 水泥灌浆机械 螺旋式输送机等 SF-1B Bronze Pb-free self-lubricating bearing used bronze alloy as base with special formulation, sintered porous bronze as its interlayer and the Compound of PTFE and lipophilicity fiber as its surface. It offers the property of good self-lubricating, low wear, low friction, corrosion resistence. It has been widely applied to metallurgy steel machinery, joined casting machinery, cement grout pump and spiral conveyer machinery etc. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V 干摩擦 Dry friction 2.5m/s Max Sliding Speed 油润滑 Oil lubrication 5.m/s 最高 PV 值 干摩擦 Dry friction 3.6N/mm 2 m/s Max PV Value Limit 油润滑 Oil lubrication 5N/mm 2 m/s 摩擦系数 μ 干摩擦 Dry friction.8~.2 Friction coefficient 油润滑 Oil lubrication.2~.7 使用温度 Working temperature -195 ~+28 导热系数 Thermal conductivity 7W/m K 热膨胀系数 Coefficient of thermal expansion /K SF-1D 碳钢基自润滑轴承 ( 液压泵 ) Carbon steel self-lubricating bearing (hydraulic pump) 该产品与 SF-1 具有相同结构, 是液压专用轴承, 是结合油缸及减震器的工作原理而设计的特殊配方产品 它具有 SF-1 优点外, 特别适用于往复频繁的大侧向力场合, 产品适用于汽车减震器 摩托车减震器以及各种液压油缸等 SF-1D has the same structure with SF-1, particularly suitable for hydraulic pump. It is a special formula designed by combining oil cylinder with the working principle of bumpers. Besides the advantages of SF-1, it is particularly applicable for the situation of great cross range force of frequent to-and-fro. It is applicable for automobile shock absorbers, motorcycle bumper and various hydraulic pressure cylinders etc. 1. 聚四氟乙烯与亲油性纤维混合物 2. 球形青铜粉 3. 铜背 1.PTFE with Fiber 2.Steel backing 3.Tin-Plating 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V 干摩擦 Dry friction 3.m/s Max Sliding Speed 油润滑 Oil lubrication 5.m/s 最高 PV 值 干摩擦 Dry friction 3.8N/mm 2 m/s Max PV Value Limit 油润滑 Oil lubrication 5N/mm 2 m/s 摩擦系数 μ Friction coefficient.4~.2 使用温度 Working temperature -195 ~+27 导热系数 Thermal conductivity 42W/m K 27

31 自润滑轴承 Self-lubricating Bearing SF-1T 碳钢基自润滑轴承 ( 齿轮油泵 ) Carbon Steel self-lubricating bearing (Gear pump) 该产品与 SF-1 具有相同结构, 是齿轮油泵专用轴承 根据齿轮油泵的高 PV 值条件而设计的特殊配方产品 它具有摩擦系数小而稳定, 耐磨性能好, 抗冲击的特点, 产品广泛应用于齿轮油泵 柱塞泵 叶片泵等 SF-1T Carbon Steel self-lubricating bearing (Gear pump) has the same structure as SF-1, it is special for gear pump. It is a special formula product devised by high PV value operational mode conditions of gear oil pump. Characterized by low friction factor, stability, well wearing performance and impact resistance, it has been widely applied to gear pumps, radial piston pumps and vane pumps etc. 1. 聚四氟乙烯与铅及其他填充混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.PTFE with lead 2.Porous bronze 3.Steel backing 4.Tin-plating 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V 干摩擦 Dry friction 2.5m/s Max Sliding Speed 油润滑 Oil lubrication 5.m/s 最高 PV 值 干摩擦 Dry friction 4.3N/mm 2 m/s Max PV Value Limit 油润滑 Oil lubrication 6N/mm 2 m/s 摩擦系数 μ Friction coefficient.3~.2 使用温度 Working temperature -195 ~+28 导热系数 Thermal conductivity 42W/m K SF-1P 碳钢基无铅自润滑轴承 ( 减震器 ) Carbon Steel Pb-free self-lubricating bearing (absorber) 该产品与 SF-1 具有相同结构, 是根据往复运动的特殊工况条件而设计的特殊配方产品, 具有断油条件下润滑能力强, 耐磨性能好, 保持油膜的特点 产品广泛应用于汽车减震器 摩托车减震器 液压马达 气动元件等 SF-1P Carbon Steel Pb-free self-lubricating bearing has the same structure as SF-1, particularly suitable for intermittent operation, reciprocating or oscillating movements. Characterized by good lubrication and wear performace in the conditions of dry operation of oil. It is applied to shock absorber of automobile, motorcycles and various hydraulic motors and pneumatic elements etc. 1. 聚四氟乙烯与铜的混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.PTFE with CU 2.Porous bronze 3.Steel backing 4.Tin-plating 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V 干摩擦 Dry friction 2.5m/s Max Sliding Speed 油润滑 Oil lubrication 5.m/s 最高 PV 值 干摩擦 Dry friction 3.6N/mm 2 m/s Max PV Value Limit 油润滑 Oil lubrication 5N/mm 2 m/s 摩擦系数 μ Friction coefficient.4~.2 使用温度 Working temperature -195 ~+27 导热系数 Thermal conductivity 42W/m K 28

32 自润滑轴承 Self-lubricating Bearing SF-1S 不锈钢基自润滑轴承 Stainless steel self-lubricating bearing 该产品以不锈钢为基体, 中间烧结球形青铜层, 表面轧制聚四氟乙烯和铅的混合物 它具有较好的自润滑 耐磨损 摩擦系数低 耐腐蚀等性能 产品广泛应用于印染机械 化工机械 海洋工业耐腐蚀部位等 SF-1S Stainless steel self-lubricating bearing uses stainless steel as base, sintered porous bronze as its interlayer and the Compound of PTFE and Lead as its surface. It offer the property of good self-lubrication, low wear, low friction, corrosion resistence. It has been widely applied to dyeing machinery, chemical engineering machinery and marine industry etc. 1. 聚四氟乙烯与亲油性纤维混合物 2. 球形青铜粉 3. 钢背 1.PTFE with Fiber 2.Porous bronze 3.Stainless steel 316 backing 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V 干摩擦 Dry friction 2.m/s Max Sliding Speed 油润滑 Oil lubrication 5.m/s 最高 PV 值 干摩擦 Dry friction 3.6N/mm 2 m/s Max PV Value Limit 油润滑 Oil lubrication 5N/mm 2 m/s 摩擦系数 μ 干摩擦 Dry friction.8~.2 Friction coefficient 油润滑 Oil lubrication.2~.7 使用温度 Working temperature -195 ~+28 导热系数 Thermal conductivity 42W/m K 热膨胀系数 Coefficient of thermal expansion /K SF-1SS 不锈钢基无铅自润滑轴承 Stainless steel Pb-free self-lubricating bearing 该产品以不锈钢为基体, 表面喷涂聚四氟乙烯 它具有较好的耐酸 耐碱 耐海水 环保等特点 产品广泛应用于化工中酸碱流量计 泵 阀以及海洋工业耐腐蚀部位等 SF-1SS Stainless steel Pb-free self-lubricating bearing used stainless steel material as base, spray painting PTFE on the surface. It is characterized by acid-resistant, alkalineresistant, ocean water resistant and environmental protection. It is t is used widely as fluid valve of measuring acid and alkalizing flow in chemical industry, and corrosion resisting sliding position in marine industry. 技术参数 :Technical Data 1 性能指标 Performance index 最大承载 P Max Load Capacity 数据 Data 12N/mm 2 1. 聚四氟乙烯与亲油性纤维混合物 2. 不锈钢背 1.PTFE with Fiber 2.Stainless steel 316 backing 2 3 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 使用温度 Working temperature 导热系数 Thermal conductivity 静载 Static load 动载 Dynamic load 干摩擦 Dry friction 油润滑 Oil lubrication 2.5m/s 3.N/mm 2 m/s 4N/mm 2 m/s.1~.25.5~ ~+27 42W/m K 29

33 自润滑轴承 Self-lubricating Bearing FR 铜网无铅自润滑轴承 Bronze mesh self-lubricating bearing without lead 该产品以青铜丝网为基体, 通过特殊工艺, 表面轧制聚四氟乙烯和亲油性纤维 它具有较低的摩擦系数 较好的耐磨性以及柔软性好 产品广泛应用于纺织机械关节轴承 汽车门铰链 汽车操纵杆等场合 FR Bronze Pb-free self-lubricating bearing uses bronze mesh as its structure, by means of special technology, rolled by PTFE at the surface and lipophilicity fiber. It performs well with lower friction and well anti-wear good pliability. It has been widely used in linkage of textile machinery, tailgate hinges, automotive steering and so on. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P Max Load Capacity 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 使用温度 Working temperature 静载 Static load 8N/mm 2 动载 Dynamic load 4N/mm 2 干摩擦 Dry friction 1.m/s 油润滑 Oil lubrication 2.5m/s 1.65N/mm 2 m/s.5~.2-4 ~ 聚四氟乙烯与铅及其他填充混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.PTFE with lead 2.Porous bronze 3.Steel backing 4.Tin-plating TEX 碳钢基 PTFE 织物无铅自润滑轴承 Carbon steel PTFE fabric Pb-free self-lubricating bearing 该产品以优质低碳钢为基体, 表面覆着以聚四氟乙烯织物 它具有更高承载力 更长的使用寿命 产品广泛应用于农用机械 球阀 蝶阀 水泵以及化工工业等重载低速而无法加油的领域 TEX is based on steel backing as its structure, the surface is laid with PTFE fabric. It performs well with heavy load and long lifetime.it is widely applies to agriculture machinery, sphere valve, butterfly valve, pumps, chemical industry in the conditions of heavy load, low velocity but unable oiling conditions. 技术参数 :Technical Data 1. 聚四氟乙烯与铜的混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.PTFE with CU 2.Porous bronze 3.Steel backing 4.Tin-plating 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 35N/mm 2 Max Load Capacity 动载 Dynamic load 18N/mm 2 最高线速度 V 干摩擦 Dry friction.5m/s Max Sliding Speed 油润滑 Oil lubrication 2.5m/s 最高 PV 值 Max PV Value Limit 3.6N/mm 2 m/s 摩擦系数 μ Friction coefficient.3~.2 使用温度 Working temperature -5 ~+25 3

34 SF-1/1W/1B/1D/1T/1P/1S/1SS 自润滑轴承 Self-lubricating Bearing 轴套外径公差表 Bushing O.D.Tolerances Table 轴套壁厚公差 Bushing Wall Thickness Tolerances Table 外径 φd Outer DiameterφD 外径公差 Outer Diameter Tolerance 内径 φd Inner Diameter φd 壁厚公差 t Wall Thickness Tolerance φd 1 1<φD 18 18<φD 3 3<φD φd<5 5 φd 18 18<φd <φD <φd< <φD 12 12<φD 18 18<φD 25 25<φD φd<8 8 φd<12 φd 可供标准产品的标注方式 Standard Bushing Label Mode 直套标注方式 Bushing Label Mode 英制直套标注方式 The Inch Bushing Label Mode 直套型号 Bushing Type 直套内径 Bushing Inner Diameter 翻边套标注方式 Flange Bushing Label Mode F 翻边套型号 Flange Bushing Type 翻边套内径 Flange Bushing Inner Diameter 直套高度 Bushing Length 翻边套高度 Flange Bushing Length 直套型号 Bushing Type 直套内径 Bushing Inner Diameter 直套高度 Bushing Length 英制翻边套标注方式 The Inch Flange Bushing Label Mode F 垫片型号 Washer Type 垫片规格 Washer Specification 垫片标注方式 Washer Label Mode W 垫片型号 Washer Type 垫片规格 Washer Specification 英制垫片标注方式 The Inch Washer Label Mode W 垫片型号 Washer Type 垫片规格 Washer Specification 垫片规格 Washer Specification 板材标注方式 Strip Label Mode P 板材型号 Strip Type 板材厚度 Strip Wall Thickness 板材宽度 Strip Width 31

35 SF-1/1W/1B/1D/1T/1P/1S/1SS 标准公制直套 Metric Standard Bushing D i S 3 B -.4 D Split β C i min..3 内外倒角 S 3 C o C i β.75.5±.3.25±.2 3 o ±5 o 1..6±.3.3±.2 3 o ±5 o 1.5.7±.3.5±.3 3 o ±5 o Z C o o o 25 5 Z 处放大 magnified Z S 3 C o C i β ±.4.5±.3 3 o ±5 o ±.6.6±.3 45 o ±5 o 标准直套标注方式 :Standard Bushing Label Mode 66 型号 Type 轴径 (f7) D s 座孔 (H7) D H 外径公差 D O 压装后内孔公差 D i,a 配合间隙 D D d Φ28 L-.3 长度 B -.4( d>φ3 L-.4) 壁厚 S

36 SF-1/1W/1B/1D/1T/1P/1S/1SS 标准公制直套 Metric Standard Bushing 型号 Type 轴径 (f7) D s 座孔 (H7) D H 外径公差 D O 压装后内孔公差 D i,a 配合间隙 C O 壁厚 S 3 长度 B

37 SF-1/1W/1B/1D/1T/1P/1S/1SS 标准公制翻边轴套 Metric Standard Flange Bushing B S fi S 3 Split β C i D fi D i D min..3 Z C o o o 25 5 Z 处放大 magnified Z S r ±.5 1.5±.5 2±.5 标准翻边套标注方式 :Standard Flange Bushing Label Mode F 64 型号规格 Designation 轴径 D s 座孔 (H7) D H 外径公差 D O 压装后内孔公差 D i,a 配合间隙 C O 壁厚 S 3 尺寸 D i D o D fi ±.5 B±.25 S fi -.2 F F F F F 17 7 F F F F F F F F F F F F F F F F F F F F F F F F F F F F F

38 SF-1/1W/1B/1D/1T/1P/1S/1SS 标准公制垫片 Metric Standard Washer S T d D H a D i D o d p H d 标准垫片标注方式 :Standard Washer Label Mode W1 型号规格 轴径垫片尺寸安装尺寸 D s D i +.25 D o -.25 S T -.5 d p ±.125 d D +.4 H a ±.2 H d W W W W W W W W W W W W W W W W SF-1/1W/1B/1D/1T/1P/1S/1SS 标准公制滑板 Metric Standard Strip T L W 标准板材标注方式 :Standard Strip Label Mode P 113 型号规格 Designation 长度 Length L +5. 宽度 Width W 厚度 Thickness T P P P P

39 SF-1/1W/1B/1D/1T/1P/1S/1SS 标准英制直套 Inch Standard Cylindrical Bushing B D i S 3 D Split β C i min..3 Z C o 25±5 o Z 处放大 magnified Z S 3 C o C i β o ±5 o o ±5 o o ±5 o S 3 C o C i β o ±5 o o ±5 o 标准英制直套标注方式 :Standard Inch Bushing Label Mode 2DU2 单位 unit: inch 轴径 D s 座孔 H7 D H 压装后内孔公差 D i,a 配合间隙 D D.32. 2IB2 2IB3 长度 B± IB25 25IB IB3 3IB4 3IB IB4 5IB16 4IB6 5IB IB3 6IB4 6IB6 6IB8 6IB1 6IB IB8 7IB IB4 8IB6 8IB8 8IB1 8IB12 8IB IB6 9IB8 9IB1 9IB IB4 1IB8 1IB1 1IB12 1IB14 1IB16 11IB IB4 12IB6 12IB8 12IB1 12IB12 12IB IB12 13IB18 14IB4 14IB6 14IB12 14IB16 14IB IB6 16IB8 16IB12 16IB16 16IB2 16IB IB6 18IB1 18IB12 18IB IB6 2IB12 2IB14 2IB16 2IB2 2IB IB12 22IB12 22IB24 22IB28 24IB8 24IB16 24IB18 24IB2 24IB24 24IB IB16 26IB IB16 28IB24 28IB32 36

40 SF-1/1W/1B/1D/1T/1P/1S/1SS 标准英制直套 Inch Standard Cylindrical Bushing 单位 unit: inch 轴径 D s 座孔 H7 D H 压装后内孔公差 D i,a 配合间隙 D D 长度 B± IB12 3IB16 3IB36 32IB8 32IB16 32IB24 32IB28 32IB32 32IB4 34IB48 36IB28 36IB32 36IB4 36IB48 36IB56 36IB6 36IB64 36IB72 4IB16 4IB26 4IB32 4IB4 4IB48 4IB56 4IB6 4IB64 4IB72 44IB32 44IB36 44IB4 44IB48 44IB56 44IB6 44IB64 44IB72 44IB76 46IB32 46IB36 46IB4 46IB48 46IB56 46IB6 46IB64 46IB72 46IB76 48IB32 48IB36 48IB48 48IB48 48IB56 48IB6 48IB64 48IB72 48IB76 52IB32 52IB36 52IB48 52IB48 52IB56 52IB6 52IB64 52IB72 52IB76 56IB32 56IB36 56IB48 56IB48 56IB56 56IB6 56IB64 56IB72 56IB76 58IB32 58IB36 58IB48 58IB48 58IB56 58IB6 58IB64 58IB72 58IB76 6IB32 6IB36 6IB48 6IB48 6IB56 6IB6 6IB64 6IB72 6IB76 64IB32 64IB36 64IB48 64IB48 64IB56 64IB6 64IB64 64IB72 64IB76 68IB32 68IB36 68IB48 68IB48 68IB56 68IB6 68IB64 68IB72 68IB76 7IB32 7IB36 7IB48 7IB48 7IB56 7IB6 7IB64 7IB72 7IB76 72IB32 72IB36 72IB48 72IB48 72IB56 72IB6 72IB64 72IB72 72IB76 76IB32 76IB36 76IB48 76IB48 76IB56 76IB6 76IB64 76IB72 76IB76 8IB32 8IB36 8IB48 8IB48 8IB56 8IB6 8IB64 8IB72 8IB76 84IB32 84IB36 84IB48 84IB48 84IB56 84IB6 84IB64 84IB72 84IB76 88IB32 88IB36 88IB48 88IB48 88IB56 88IB6 88IB64 88IB72 88IB76 92IB32 92IB36 92IB4 92IB48 92IB56 92IB6 92IB64 92IB72 92IB76 96IB32 96IB36 96IB4 96IB48 96IB56 96IB6 96IB64 96IB72 96IB76 1IB32 1IB36 1IB4 1IB48 1IB56 1IB6 1IB64 1IB72 1IB76 14IB32 14IB36 14IB4 14IB48 14IB56 14IB6 14IB64 14IB72 14IB76 18IB32 18IB36 18IB4 18IB48 18IB56 18IB6 18IB64 18IB72 18IB76 112IB32 112IB36 112IB4 112IB48 112IB56 112IB6 112IB64 112IB72 112IB76 37

41 SF-1/1W/1B/1D/1T/1P/1S/1SS 标准英制翻边轴套 Inch Standard Flange Bushing B S fi r S 3 Split β C i Z 轴径 D s 座孔 H7 D H 压装后内孔公差 D i,a 配合间隙 D D 法兰尺寸 D f 法兰厚度 S f1 长度 B± FIB4 6FIB6 6FIB8 6FIB FIB4 8FIB6 8FIB8 8FIB FIB6 1FIB8 1FIB1 1FIB FIB6 12FIB8 12FIB12 12FIB FIB8 14FIB12 14FIB16 14FIB FIB8 16FIB12 16FIB16 16FIB FIB16 2FIB2 2FIB FIB16 24FIB24 24FIB FIB16 28FIB24 28FIB32 S T d D H a d p D i D o H d D fi D i D min..3 C o 25 5 o Z magnified Z 标准英制翻边套标注方式 :Standard Inch Flange Bushing Label Mode F 64 SF-1WC 英制标准垫片 inch Standard Washer 单位 unit: inch 标准英制垫片标注方式 :Standard Inch Washer Label Mode W DU6 单位 unit: inch 规格 垫片尺寸 Washer size 安装尺寸 Installation size Standard No. D i +.1 D o -.1 S T d p -.1 d D +.1 H a ±.1 H d +.1 SF-1 WC6IB SF-1 WC7IB SF-1 WC8IB SF-1 WC9IB SF-1 WC1IB SF-1 WC11IB SF-1 WC12IB SF-1 WC13IB SF-1 WC14IB SF-1 WC16IB SF-1 WC18IB SF-1 WC2IB SF-1 WC22IB SF-1 WC24IB SF-1 WC26IB SF-1 WC28IB SF-1 WC3IB SF-1 WC32IB

42 无油自润滑轴承 Oilles Self-lubricating Bearing 1. 聚甲醛与纤维混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.POM with fiber 2.Porous bronze 3.Steel backing 4.Copper-plating SF-2 碳钢基边界无铅自润滑轴承 Marginal Pb-free self-lubricating bearing 该产品以优质低碳钢为基体, 中间烧结球形青铜层, 表面轧制改性聚甲醛 在边界润滑条件下可长期使用而不加油, 耐磨层表面有储油坑 产品广泛应用于冶金机械 矿山机械 水利机械 汽机车 建筑机械 农用机械 轧钢行业等 SF-2 Marginal Pb-free self-lubricating bearing is used steel-backing as its structure, sintered porous bronze as its interlayer, surface inlaid the modified POM. Suitable for marginally lubricated and dry operation on the conditions of lubrication indents grease. It has been widely applied to metallurgical machinery, Mine machinery, water conservancy machinery, vapor locomotive, building machinery, agriculture machinery, steel rolling industry etc. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 脂润滑 Grease lubrication 脂润滑 Grease lubrication 脂润滑 Grease lubrication 2.5m/s 2.8N/mm 2 m/s.5~.25 使用温度 Working temperature -4 ~+13 导热系数 Thermal conductivity 4W/m K 热膨胀系数 Coefficient of thermal expansion /K 1. 聚甲醛与纤维混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.POM with fiber 2.Porous bronze 3.Steel backing 4.Copper-plating SF-2Y 碳钢基边界无铅自润滑轴承 Marginal Pb-free self-lubricating bearing 该产品与 SF-2 具有相同结构和使用性能, 在边界润滑条件下可长期使用而不加油, 耐磨层表面有储油坑 产品广泛应用于冶金机械 矿山机械 水利机械 汽机车 建筑机械 农用机械 轧钢行业等 SF-2Y has the same structure and functional performance with SF-2. It can work long time without oil in the condition of prelubricated with lubrication indents.widely applied to metallurgy machinery, Mining machinery, water conservancy machinery, automobile, building machinery, agriculture machinery, rolling steel industry etc. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 脂润滑 Grease lubrication 脂润滑 Grease lubrication 脂润滑 Grease lubrication 2.5m/s 2.8N/mm 2 m/s.5~.25 使用温度 Working temperature -4 ~+13 导热系数 Thermal conductivity 4W/m K 热膨胀系数 Coefficient of thermal expansion /K 39

43 无油自润滑轴承 Oilles Self-lubricating Bearing 1. 聚四氟乙烯与铅及其他填充混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.PTFE with lead 2.Porous bronze 3.Steel backing 4.Tin-plating SF-2S 碳钢基边界无铅自润滑轴承 Marginal Pb-free self-lubricating bearing 该产品以优质低碳钢为基体, 中间烧结球形青铜层, 表面轧制以缩醛树脂 / 亲油性纤维的特殊树脂 具有摩擦系数低 耐磨性能好 无油条件下润滑的特点 产品广泛应用于卷场机 推土机 印染机 采煤机 冲床 吊车 / 行车高空作业等领域 SF-2S Marginal Pb-free self-lubricating bearing based on steel-backing, sintered porous bronze as its interlayer, surface rolled by acetal resin and polymer material constaining oleophylicity fiber and perform well on low friction factor, well wear performance and oil free condition lubrication. It has been widely applied to winding engines, printing and dyeing machinery, coal-cutters, punch, winch truck, traveling crane etc. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 11N/mm 2 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 脂润滑 Grease lubrication 脂润滑 Grease lubrication 脂润滑 Grease lubrication 2.5m/s 3.2N/mm 2 m/s.3~.2 使用温度 Working temperature -6 ~+13 导热系数 Thermal conductivity 4W/m K 热膨胀系数 Coefficient of thermal expansion /K SF-2N 碳钢基边界无铅自润滑轴承 Marginal Pb-free self-lubricating bearing 该产品以优质低碳钢为基体, 中间烧结球形青铜层, 表面轧制以缩醛树脂 / 亲油性纤维的特殊树脂 具有摩擦系数低 耐磨性能好 无油条件下润滑的特点 产品广泛应用于卷场机 推土机 印染机 采煤机 冲床 吊车 / 行车高空作业等领域 SF-2N has the same structure and functional performance with SF-2. Suitable for marginal lubrication and dry operation conditions. It has been widely applied to metallurgy machinery, Mining machinery, water conservancy machinery, automobile, building machinery, agriculture equipment, rolling steel industry etc. 1. 聚四氟乙烯与铜的混合物 2. 球形青铜粉 3. 刚背 4. 电镀层 1.PTFE with CU 2.Porous bronze 3.Steel backing 4.Tin-plating 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 静载 Static load 25N/mm 2 Max Load Capacity 动载 Dynamic load 14N/mm 2 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 脂润滑 Grease lubrication 脂润滑 Grease lubrication 脂润滑 Grease lubrication 2.5m/s 2.8N/mm 2 m/s.5~.25 使用温度 Working temperature -4 ~+13 导热系数 Thermal conductivity 4W/m K 热膨胀系数 Coefficient of thermal expansion /K 4

44 SF-2/2Y/2S/SN 标准公制轴套 Metric Standard Bushing 轴套外径公差表 Bushing O.D.Tolerances Table 轴套壁厚公差 Bushing Wall Thickness Tolerances Table 外径 φd Outer DiameterφD 外径公差 Outer Diameter Tolerance 内径 φd Inner Diameter φd 壁厚公差 t Wall Thickness Tolerance φd 1 1<φD φd <φD 3 3<φD <φd <φD <φd< <φD 12 12<φD φd< <φD 25 25<φD φd 可供标准产品的标注方式 Standard Bushing Label Mode 直套标注方式 Bushing Label Mode 板材标注方式 Strip Label Mode SF-2 直套型号 Bushing Type 直套内径 Bushing Inner Diameter SF-2 P 直套高度 Bushing Length 板材型号 Strip Type 板材厚度 Strip Wall Thickness 板材宽度 Strip Width 垫片标注方式 Washer Label Mode 垫片型号 Washer Type 垫片规格 Washer Specification SF-2 W 41

45 SF-2/2Y/2S/SN 标准公制轴套 Metric Standard bearings = = d L β C i D i D o min..3 S 3 B Z Split C o o o 25 5 Z 处放大 magnified Z 内外倒角 S 3 C o C i β 1..6±.3.3±.2 3 o ±5 o 1.5.7±.3.5±.2 3 o ±5 o S 3 C o C i β ±.4.5±.3 3 o ±5 o ±.6.6±.3 45 o ±5 o 标准直套标注方式 :Standard Bushing Label Mode SF-2 11 型号规格 Designation 轴径 D s h8 座孔 H7 D H 外径公差 D O 压装后配合间隙内孔公差 C D D i,a 壁厚 S 3 油孔 d L 长度 B SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF

46 SF-2/2Y/2S/SN 标准公制轴承 Metric Standard bearings 型号规格 Designation 轴径 D S h8 65 座孔 H7 外径公差 D D O H 7 7 SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF 压装后配合间隙内孔公差 C D D i,a 壁厚 S 油孔 d L 长度 B

47 SF-2/2Y/2S/SN 标准公制垫片 Metric Standard Washer S T d D H a D i D o d p H d 油穴 Lubrication Pochet 标准垫片标注方式 :Standard Washer Label Mode SF-2 W1 轴径 D S 型号规格 Designation 垫片尺寸 Washer size 安装尺寸 +.4 D i +.25 D o -.25 S T -.5 d p ±.125 d D +.1 H a ±.2 H d SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2 W SF-2/2Y 标准公制板材 Metric Standard Strip S T L W 油穴 Lubrication Pochet 标准滑板标注方式 :Standard Strip Label Mode SF-2 P 113 型号规格 Designation 长度 (L)±1 宽度 (W)±1 厚壁 (S s )-.5 SF-2 P SF-2 P SF-2 P SF-2 P

48 JF-8/72/7/2/93 双金属自润滑轴承 Bimetallic self-lubricating bearing 该产品以优质低碳钢为基体, 表面烧结青铜粉, 适用于高载低速下的旋转, 摇摆运动 具有摩擦系数低 耐磨性能好 使用寿命长 抗咬合性能好等特点, 铜合金层可根据要求加工出各种类型的油穴 油槽 产品被广泛应用于矿山机械 汽机车 建筑机械 农用机械 轧钢机械等 JF-8/72/7/2/93 Bimetallic self-lubricating bearing used high quality lowcarbon steel plate as base, sintered porous bronze as its surface, suitable for rotatory oscillating, reciprocating movements on the conditions of high load.low speed, low friction, well wear resistance, long lifetime and better prevent from holding-on.the bronze layer surface can be machined with various of grooves, oil pockets in terms of different work condition. The product is widely used in mining machinery, automobile, building machinery, agriculture equipment, rolling steel industry etc. 材料特性 :Material Characterisitc 材料牌号 Material Trademark 合金成份 Alloy Composition 合金硬度 Alloy Hardness 国际标准 International Standard JF-8 CuPb1Sn1 7~1HB 美国 SAE-797/ 德国 GLYCO 66/ 日本 JIS-LBC3 JF-72 CuPb24Sn4 45~7HB 美国 SAE-797/ 德国 GLYCO 68/ 日本 JIS-LBC6 JF-7 CuPb3 4~6HB 美国 SAE-48/ 日本 JIS-KJ3 JF-2 AlSn2Cu 3~45HB 美国 SAE-783/ 德国 GLYCO 74/ 日本 JIS-AJL JF-93 CuPb6.5P.1 69~9HB 技术参数 :Technical Data 性能指标 Performance index 最大承载 P(N/mm 2 ) Max Load Capacity 拉伸强度 (N/mm 2 ) Tensile Strength 型号 Type JF-8 JF-72 JF-7 JF-2 JF 最大线速度 ( 油润滑 )V(m/s) Max Sliding Speed (Oil Lubrication) 摩擦系数 μ Friction coefficient ~.14.6~.16.8~.16.8~.17.6~.16 最高 PV 值 N/mm 2 m/s Max PV Value Limit 脂润滑 Grease lubrication 油润滑 Oil lubrication

49 JF-8/72/7/2/93 双金属自润滑轴承 Bimetallic self-lubricating bearing 应用特性 :Application Characteristics 材料牌号 Material Trademark 适用条件 适用场合 JF-8 JF-72 JF-7 很高的耐疲劳强度和承载能力, 抗冲击能力强, 耐磨性 耐腐蚀性好 Very good resistance to fatigue strenth, with high shock resistance and good corrosion resisitance. 较高的耐疲劳强度和承载能力 较好的滑动性能, 易受润滑油腐蚀 Good resistance to fatigue strength and high load capacity,good performance of sliding, liable to be corrupted by lubricationg oil. 较高的耐疲劳强度 承载能力 抗冲击能力 Good resistance to fatigue strength,load capacity, shock resistance and corrosion. 中速 高冲击载荷的衬套, 内燃机连杆活塞销衬套 Fit for middle load, high speed, bushes,washer and connecting rod bearing in internal combustion engine used in machinical equipment and high shock bushing. 中载中速 高速内燃机主轴套和连杆轴套 middle load middle speed, principle axis of internal combustion engine. 用于内燃机主轴和连杆轴承 止推垫片 Principle axis of internal combustion engine, connecting rod bushing. JF-2 良好的抗咬性 异物埋没性, 工作表面镀软合金层 Good performance of anti-seizing, covering eyewinker, soft alloy be plated on working surface. 高速中低载荷的内燃机主轴套, 连杆轴套 High speed, middle or low load, principle axis internal combustion engine JF-93 中等的耐疲劳强度和承载能力, 良好的抗腐蚀性能, 较好轴承滑动性能 Moderate fatigue strength, and load capacity, good performance of bearing sliding. 高速低载的内燃机轴瓦 气压机 制冷机轴套 High speed, low load, internal combustion engine half bearing, bushing used in compressing and refrigerating machine. 1. 聚四氟乙烯与纤维混合物 2. 球形青铜粉 3. 钢背 4. 电镀层 1.PTFE with fibre 2.Porous bronze 3.Steel backing 4.Tin-plating FB8G 双金属固体自润滑轴承 Bimetallic solid self-lubricating bearing 该产品以优质低碳钢为基体, 表面烧结青铜粉, 适用于高载低速下的旋转, 摇摆运动 具有摩擦系数低 耐磨性能好 使用寿命长 抗咬合性能好等特点, 铜合金层可根据要求加工出各种类型的油穴 油槽 产品被广泛应用于矿山机械 汽机车 建筑机械 农用机械 轧钢机械等 FB8G Bimetallic solid self-lubricating bearing based on high quality low-carbon steel backing, sintered porous bronze as its surface. Surface of alloy is rolled the spirally diamond type of the oil pockets, embedded lead and molybdenum disulfide, the lubrication area of the bearing surface is being about 25%. Performed well by low friction coefficient, good lubricating action and wear resistant action. Particularly suit for starting motor for automobiles, generators, hoisting machines and metallurgical machinery. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P 干摩擦 Dry friction 7N/mm 2 Max Load Capacity 油润滑 Oil lubrication 9N/mm 2 最高线速度 V 干摩擦 Dry friction.4m/s Max Sliding Speed 油润滑 Oil lubrication 2.m/s 最高 PV 值 干摩擦 Dry friction 2.6N/mm 2 m/s Max PV Value Limit 油润滑 Oil lubrication 15N/mm 2 m/s 摩擦系数 μ 干摩擦 Dry friction <.22 Friction coefficient 油润滑 Oil lubrication <.8 使用温度 Working 干摩擦 Dry friction 25 temperature 油润滑 Oil lubrication 2 导热系数 Thermal conductivity 76W/m K 热膨胀系数 Coefficient of thermal expansion /K 46

50 JF-8/72/7/2/93 标准公制轴套 Metric Standard Bushing 轴套外径公差表 Bushing O.D.Tolerances Table 轴套壁厚公差 Bushing Wall Thickness Tolerances Table 外径 φd Outer DiameterφD 外径公差 Outer Diameter Tolerance 内径 φd Inner Diameter φd 壁厚公差 t Wall Thickness Tolerance φd 1 1<φD <φd <φD <φd <φD <φD <φd< <φD 12 12<φD φd 双金属自润滑轴承的油槽油穴形式 Type for Bi-Metaltic Bushing Grooves and Indents ( 1 ) 3 min ( 2 ) ( 3 ).4± ( 4 ) min ( 5 ) 6 min ( 6 ) 2 双金属自润滑轴承的搭扣形式 Lock Types for Bi-Metaltic Bushing A B C D 47

51 JF-8/72/7/2/93 标准公制轴承 Metric Standard Bushing = = d L β C i D i D o min..3 S 3 B Z Split C o o o 25 5 Z 处放大 magnified Z 内外倒角 S 3 C o C i β.75.5±.3.25±.2 35 o ±5 o 1..6±.3.3±.2 35 o ±5 o 1.5.7±.3.5±.3 35 o ±5 o S 3 C o C i β ±.4.5±.3 3 o ±5 o ±.6.6±.3 45 o ±5 o 标准直套标注方式 :Standard Bushing Label Mode JF-8 11 型号规格 Designation D i D O 轴径 (h8) D s 座 (H7) D H 压装后配合间隙内孔公差 C D D i,a 壁厚 S 3 油孔 d L B JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF

52 JF-8/72/7/2/93 标准公制轴承 Metric Standard Bushing 型号规格 Designation D i D O 轴径 (h8) D s 座 (H7) D H 压装后配合间隙内孔公差 C D D i,a 壁厚 S 3 油孔 d L B JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF

53 FB 单金属系列自润滑轴承 Mometallic self-lubricating Bearings FB9 青铜自润滑轴承 Bronze self-lubricating bearing 该产品以特殊配方的高密度铜合金带材为基体, 表面轧制菱形油穴或半球形的油穴, 具有密度高, 承载压力大, 耐磨性能好, 使用寿命长 产品被广泛应用于起重机械 建筑机械 机床工业 采矿机械等领域 FB9 Bronze self-lubricating bearings used a kind of high density broze alloy of special compositions as base, surface of alloy is rolled diamond type of the oil indents or half ball oil indents, this kind of bearing has higher density, load capacity, well wearing performance, longer lifetime. It has been widely used in many fields, such as hoist machines, building machinery, machine tool industry and mining machinery. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P Max Load Capacity 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 使用温度 Working temperature 导热系数 Thermal conductivity 静载 Static load 12N/mm 2 动载 Dynamic load 4N/mm 2 2.m/s 2.8N/mm 2 m/s.8~.25-1 ~+2 6W/m K 热膨胀系数 Coefficient of thermal expansion /K FB92 青铜冲孔自润滑轴承 Bronze with through hole self-lubricating bearing 该产品 CuSn8 为基体, 工作表面布满有规则油孔, 具有承载高 耐磨性能好 摩擦系数低 产品被广泛应用于输送机 升降机 卷扬机 农用机械等 FB92 Bronze punch hole self-lubricating bearing used CuSn8 as base, designed regular oil holes bestrewn working surface, it has high load capacity, well wearing resistance and low friction coefficient, if has been widely applied to transportation machinery, elecator, coiling machinery and agriculture equipment. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P Max Load Capacity 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 使用温度 Working temperature 导热系数 Thermal conductivity 静载 Static load 12N/mm 2 动载 Dynamic load 4N/mm 2 2.5m/s 2.8N/mm 2 m/s.8~.25-1 ~+2 6W/m K 热膨胀系数 Coefficient of thermal expansion /K 5

54 FB 单金属系列自润滑轴承 Mometallic self-lubricating Bearings FB9G 青铜固体自润滑轴承 Bronze self-lubricating bearing 该产品 CuSn8 为基体, 表面轧制螺旋角度菱形油穴, 内嵌石墨或二硫化钼, 润滑面积 25% 具有摩擦系数小, 良好的润滑性和抗磨性 产品被广泛应用于汽车起动电机, 发电机, 汽机车离合器等 FB9G bronze solid self-lubricating bearing used CuSn8 as base, agglomerated by porous bronze powder, surface of alloy is rolled the spirally diamond type of the hole, embedded lead and molybdenum disulfide, the lubrication area of the bearing surface is being about 25%.Characterized by low friction coefficient, good lubricating action and wear resistant action. This type of bearing is particularly applied in starting motor for automobiles, generators, automotive clutch parts etc. 技术参数 :Technical Data 性能指标 Performance index 数据 Data 最大承载 P Max Load Capacity 最高线速度 V Max Sliding Speed 最高 PV 值 Max PV Value Limit 摩擦系数 μ Friction coefficient 使用温度 Working temperature 导热系数 Thermal conductivity 静载 Static load 12N/mm 2 动载 Dynamic load 4N/mm 2 2.5m/s 2.8N/mm 2 m/s.5~.25-1 ~+2 6W/m K 热膨胀系数 Coefficient of thermal expansion /K 油穴类型 油穴类型 Oil Pocket Type Oil Hole Type 内径 φd 22 内径 φd>22 内径 φd 25 内径 φd>25 Inner Diameter φd 22 Inner Diameter φd>22 Inner Diameter φd 25 Inner Diameter φd> ±.2 3.6±.2 51

55 FB 单金属系列自润滑轴承 Mometallic self-lubricating Bearings 轴套外径公差表 Bushing O.D.Tolerances Table 轴套壁厚公差 Bushing Wall Thickness Tolerances Table 外径 φd Outer DiameterφD 外径公差 Outer Diameter Tolerance 内径 φd Inner Diameter φd 壁厚公差 t Wall Thickness Tolerance φd φd <φD <φd <φD <φd <φD <φd <φD <φd <φD <φd <φD <φd <φD <φd 检验座孔公差表 Test Housing Tolerances Table 外径 φd Outer DiameterφD 座孔 H7 中值 Housing H7 Middle ~1 18~3 3~5 5~8 8~12 12~18 18~25 D+.9 D+.11 D+.13 D+.15 D+.18 D+.2 D+.23 FB 系列产品压入座孔 h7 中值, 内孔精度达到 h9 FB series products press into housing H7 middle, accuracy of inner diameter can reach H9. 可供标准产品的标注方式 Standard Bushing Label Mode 直套标注方式 Bushing Label Mode 翻边套标注方式 Flange Bushing Label Mode FB FB F 直套型号 Bushing Type 翻边套型号 Flange Bushing Type 直套内径 Bushing Inner Diameter 直套高度 Bushing Length 翻边套内径 Flange Bushing Inner Diameter 翻边套高度 Flange Bushing Length 52

56 FB9/92/9G 标准公制轴承 Metric Standard Bushing Split β C i D o D i min..3 C o B Z Z 处放大 magnified Z ID and OD chamfers S 3 C o C i β.75.5±.3.25±.2 35 o ±5 o 1..6±.3.3±.2 35 o ±5 o 1.5.7±.3.5±.3 35 o ±5 o S 3 C o C i β ±.4.5±.3 3 o ±5 o ±.6.6±.3 45 o ±5 o 标准直套标注方式 :Standard Bushing Label Mode FB 11 型号规格 Designation 内径 D i 外径 D O B FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB

57 FB9/92/9G 标准公制轴承 Metric Standard Bushing 型号规格 Designation 内径 D i 外径 D O B FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB

58 FB9F/92F 标准公制翻边轴承 Metric Standard Flange Bushing h L Z Split 45 o ± 5 o φd 1 ±.5 φd φd min o ± 5 o Z 处放大 magnified 标准翻边套标注方式 :Standard Flange Bushing Label Mode FB F 2515 型号 Type 内径 φd 外径 φd 法兰外径 φd 1 ±.5 法兰壁厚 h 高度 L±.25 FB9 F FB9 F FB9 F 32 FB9 F FB9 F 33 3 FB9 F 353 FB9 F FB9 F FB9 F 43 FB9 F FB9 F 45 5 FB9 F 53 FB9 F FB9 F 55 5 FB9 F 553 FB9 F FB9 F FB9 F 64 FB9 F FB9 F 66 6 FB9 F 85 FB9 F FB9 F 88 8 FB9 F FB9 F FB9 F 18 8 FB9 F FB9 F FB9 F FB9 F f 1 f 2 相配轴径 Axle 相配座孔 Housing

59 FU 粉末冶金轴承 FU Sintered bearings Performance index Data Maximum load capacity 15 N/mm 2 It's made of bronze or iron powder, mold pressed in high pressure, sintered in high temperature and soaked in oil by vacuum. It's used in domestic electric appliances, electric tools, textiles machinery, chemical machinery and automobile industry, etc. Temperature range -6 ~+2 Maximum sliding speed 2.5 m/s Alloy material CuSn6-6-3 Maximum PV value 2.45 N/mm 2 m/s 粉末冶金含油轴承的形状 SHATEF OF SINTERED FUBEARING 材料的种类及金属基体 TYFES OF MATERIAL AND BASIC METAL MATERIAL CODE BASIC METAL ALLOY COMPOSITION FM11 ( 铜基 ) COPPER BASED FM12 ( 铁基 ) IRON BASED SAE841 ASTM B438-7 GR1 Type DIN3 91 PART3SintA5 Mil-B-5687C Type CompA SAE863 Type3 SATM B439-7 GR4 Mil-B-5687C TypeⅡCompB Cu87.5~9.5,Fe1.max,Sn9.5~1.5,P1.75, 杂质为.5 Cu18.~22.,Fe 余量, 杂质为 2. ALLOW ANCE 可供产品的标注方式 LABEL METHOD PRODUCTS AVAILABLE METRIC SINTERED BEARING METRIC SINTERED BEARING WITH FLAGE FU 1 B FU 1 B LENFTH OD ID METRIC SINTERED SPHERICAL BEARING LENFTH OD ID METRIC SINTERED BEARING WITH RING FU 1 Q-1 FU 1 Q-11 LENFTH ID LENFTH ID 56