H T-8047 T-8045A, HT-8045C HT-8045A PROG. HUMIDITY CHAMBER Hung Ta has achieved a perfect design The rounded corners of the front face give a pleasing

Size: px

Start display at page:

Download "H T-8047 T-8045A, HT-8045C HT-8045A PROG. HUMIDITY CHAMBER Hung Ta has achieved a perfect design The rounded corners of the front face give a pleasing"

众甄巫
5 years ago
Views:

H T-8047 T-8045A, HT-8045C HT-8045A PROG. HUMIDITY CHAMBER Hung Ta has achieved a perfect design The rounded corners of the front face give a pleasing appearance the bump-free.

ORDER INFORMATION HTL 225 A T Relative humidity%rh HT-8045A Temperature Humidity Control Chart Temperature Temperature range HTL -70 +150 HTN -50 +150 HTM -40 +150 HT -30 +150 HTC 0 +150 Volume of

2 H T-8047 T-8045A, HT-8045C HT-8045A PROG. HUMIDITY CHAMBER Hung Ta has achieved a perfect design The rounded corners of the front face give a pleasing appearance the bump-free. Smoothly locking door has a flush surface that is free from any protrusions such as handles. ORDER INFORMATION HTL 225 A T Relative humidity%rh HT-8045A Temperature Humidity Control Chart Temperature Temperature range HTL HTN HTM HT HTC Volume of chamber cm cm cm cm Temperature only Mode of control A Programmable B Set point cm cm cm cm HT-8045C HT-8045C BENCH TOP HUMIDITY CHAMBER (SET POINT) Model System Temp. range Humid range Temp. constancy Humid constancy Temp. uniformity Humid uniformity Heat-up time Cool down time Inside dimensions Outside dimensions Interior material Exterior material Insulation material Refrigeration system Safety devices Power supply Note: Recorder for all models is optional. HT-8045C Balanced temperature & humidity control system 0 ~ ~98%RH 1.0 3%RH 1.0 3%RH (in the center) Relative humidity%rh HT-8045C Temperature Humidity Control Chart +25 ~ approx 35 min. +25 ~ 0 20 within 20min. 40(W)x45(H)x40(D) cm Temperature 120(W)x80(H)x75(D) cm SUS#304 stainless steel plate SUS#304 stainless steel plate (150) Rigid polyurethane foam (glass wool 150 ) single stage refrigeration system No fuse breaker, refrigerator overload relay, refrigerator high pressure switch, air circulator thermal switch, protection relay, protection fuse, boil dry protector, system trouble monitor alarm and overheat protector Ø50mm viewing window, shelves (freely adjustable 2 pcs), cable port (50 mm dia.) and chamber lamp AC 1Ø, AC220/240V, 50/60Hz 21

H T-8045A, HT-8045AT, HT-8045B, HT-8045BT HT-8045A PROG. HUMIDITY CHAMBER LCD 10010099 LCD display, Chinese/English setting, maximum 100 programs, 100 steps in total, 99 cycles repeat setting.

3 H T-8045A, HT-8045AT, HT-8045B, HT-8045BT HT-8045A PROG. HUMIDITY CHAMBER LCD LCD display, Chinese/English setting, maximum 100 programs, 100 steps in total, 99 cycles repeat setting. HT-8045A HT-8045B DIRECT DISPLAY HUMIDITY CHAMBER LED0.1 1%RH PID LED display, Chinese/English setting, 0.1,1%RH resolution fix point, PID control. HT-8045B The model of programmable temperature/ humidity controller is under continuous improvement and so subject to change without notice. HT-8045AT PROG. TEMPERATURE CHAMBER LCD LCD display, Chinese/English setting, maximum 100 programs, 100 steps in total, 99 cycles repeat setting. HT-8045AT HT-8045BT DIRECT DISPLAY TEMPERATURE CHAMBER LED0.1 1%RH PID LED display, Chinese/English setting, 0.1,1%RH resolution fix point, PID control. HT-8045BT The model of programmable temperature/ humidity controller is under continuous improvement and so subject to change without notice. USB Note USB models for all types are optional. 2

4 H T-8045A, HT-8045B HT-8045A/B PROG. / SET POINT HUMIDITY CHAMBER SPECIFICATIONS Model HTL-80A/B HTL-150 A/B HTL-225 A/B HTL-408 A/B HTL-800 A/B HTN-80 A/B HTN-150 A/B HTN-225 A/B HTN-408 A/B HTN-800 A/B System Balanced temperature & humidity control system Temp. range -70 ~ ~+150 Humid range RH RH Temp. constancy Humid constancy 3%RH 3%RH Temp. uniformity Humid uniformity 3%RH (in the center) 3%RH (in the center) Heat-up time -70 ~ ~ Cool down time 20 ~ ~ Inside dimensions(wxhxd)cm 40x50x40 50x60x50 50x75x60 60x85x80 100x100x80 40x50x40 50x60x50 50x75x60 60x85x80 100x100x80 Outside dimensions 110x137x67 120x147x77 120x162x87 130x172x x187x x137x67 120x147x77 120x162x87 130x172x x187x107 Interior material Exterior material Insulation material Refrigeration system Safety devices cascade refrigeration system SUS#304 stainless steel plate SUS#304 stainless steel plate Rigid polyurethane foam & glass wool Air cooled dual stage refrigeration system single stage refrigeration system no fuse breaker, refrigerator overload relay, refrigerator high pressure switch, over-temp. protector, protection fuse, water level protector, protection relay, system trouble monitor alarm Ø50mm viewing window, shelves (freely adjustable 2 pcs), cable port (50 mm dia.) and chamber lamp Power supply 1Ø, AC220~240V, 50/60Hz 3Ø, AC220V~415V, 50/60Hz 1Ø, AC220~240V, 50/60Hz 3Ø, AC220V~415V, 50/60Hz HT-8045A/B PROG. / SET POINT HUMIDITY CHAMBER SPECIFICATIONS Model HTM-80A/B HTM-150 A/B HTM-225 A/B HTM-408 A/B HTM-800 A/B HT-80 A/B HT-150 A/B HT-225 A/B HT-408 A/B HT-800 A/B System Balanced temperature & humidity control system Temp. range -40 ~ ~+150 Humid range RH RH Temp. constancy Humid constancy 3%RH 3%RH Temp. uniformity Humid uniformity 3%RH (in the center) 3%RH (in the center) Heat-up time -40 ~ ~ Cool down time 20 ~ ~ Inside dimensions(wxhxd)cm 40x50x40 50x60x50 50x75x60 60x85x80 100x100x80 40x50x40 50x60x50 50x75x60 60x85x80 100x100x80 Outside dimensions 110x137x67 120x147x77 120x162x87 130x172x x187x x137x67 120x147x77 120x162x87 130x172x x187x107 Interior material Exterior material Insulation material Refrigeration system Safety devices cascade refrigeration system SUS#304 stainless steel plate SUS#304 stainless steel plate Rigid polyurethane foam & glass wool Air cooled dual stage refrigeration system single stage refrigeration system no fuse breaker, refrigerator overload relay, refrigerator high pressure switch, over-temp. protector, protection fuse, water level protector, protection relay, system trouble monitor alarm Ø50mm viewing window, shelves (freely adjustable 2 pcs), cable port (50 mm dia.) and chamber lamp Power supply 1Ø, AC220~240V, 50/60Hz 3Ø, AC220~415V, 50Hz 1Ø, AC220~240V, 50/60Hz 3Ø, AC220~415V, 50Hz 3

5 H T-8045AT, HT-8045BT HT-8045AT/BT PROG. / SET POINT TEMPERATURE CHAMBER SPECIFICATIONS Model HTL-80AT/BT HTL-150AT/BT HTL-225 AT/BT HTL-408AT/BT HTL-800 AT/BT HTN-80 AT/BT HTN-150 AT/BT HTN-225 AT/BT HTN-408 AT/BT HTN-800 AT/BT System Balanced temperature & humidity control system Temp. range -70 ~ ~+150 Temp. constancy Temp. uniformity Heat-up time -70 ~ ~ Cool down time 20 ~ ~ Inside Dimensions 40x50x40 50x60x50 50x75x60 60x85x80 100x100x80 40x50x40 50x60x50 50x75x60 60x85x80 100x100x80 (WxHxD)cm Outside dimensions 110x137x67 120x147x77 120x162x87 130x172x x187x x137x67 120x147x77 120x162x87 130x172x x187x107 Interior material Exterior material Insulation material Refrigeration system Safety devices cascade refrigeration system SUS#304 stainless steel plate SUS#304 stainless steel plate Rigid polyurethane foam & glass wool Air cooled dual stage refrigeration system no fuse breaker, refrigerator overload relay, refrigerator high pressure switch, over-temp. protector, protection fuse, water level protector, protection relay, system trouble monitor alarm single stage refrigeration system Ø50mm viewing window, shelves (freely adjustable 2 pcs), cable port (50 mm dia.) and chamber lamp Power supply 1Ø, AC220~240V, 50/60Hz 3Ø, AC220~415V, 50/60Hz 1Ø, AC220~240V, 50/60Hz 3Ø, AC220~415V, 50/60Hz HT-8045AT/BT PROG. / SET POINT TEMPERATURE CHAMBER SPECIFICATIONS Model HTM-80AT/BT HTM-150AT/BT HTM-225 AT/BT HTM-408AT/BT HTM-800 AT/BT HT-80 AT/BT HT-150 AT/BT HT-225 AT/BT HT-408 AT/BT HT-800 AT/BT System Balanced temperature & humidity control system Temp. Range -40 ~ ~+150 Temp. Constancy Temp. Uniformity Heat-up time -40 ~ ~ Cool down time 20 ~ ~ Inside dimensions 40x50x40 50x60x50 50x75x60 60x85x80 100x100x80 40x50x40 50x60x50 50x75x60 60x85x80 100x100x80 (WxHxD)cm Outside dimensions 110x137x67 120x147x77 120x162x87 130x172x x187x x137x67 120x147x77 120x162x87 130x172x x187x107 Interior material Exterior material Insulation material Refrigeration system Safety devices cascade refrigeration system SUS#304 stainless steel plate SUS#304 stainless steel plate Rigid polyurethane foam & glass wool Air cooled dual stage refrigeration system no fuse breaker, refrigerator overload relay, refrigerator high pressure switch, over-temp. protector, protection fuse, water level protector, protection relay, system trouble monitor alarm single stage refrigeration system Ø50mm viewing window, shelves (freely adjustable 2 pcs), cable port (50 mm dia.) and chamber lamp Power supply 1Ø, AC220~240V, 50/60Hz 3Ø, AC220~415V, 50/60Hz 1Ø, AC220~240V, 50/60Hz 3Ø, AC220~415V, 50/60Hz 4

H T-9745 PROGRAMMABLE TEMPERATURE & HUMIDITY WALK-IN CHAMBER Temperature Humidity Control Chart Temperature Humidity Control System Temperature Humidity Control Chart Relative humidity%rh Temperature

6 H T-9745 PROGRAMMABLE TEMPERATURE & HUMIDITY WALK-IN CHAMBER Temperature Humidity Control Chart Temperature Humidity Control System Temperature Humidity Control Chart Relative humidity%rh Temperature HT-9745 Programmable Temperature & Humidity Walk-In Chamber Model HTN-S HTN-M HTN-L HTM-S HTM-M HTM-L HT-S HT-M HT-L System Balanced Temperature & Humidity Control System HC-S HC-M HC-L Temp.range -50 ~ ~ ~+80 0 ~+80 Humi. range RH RH Temp. constancy Humi. constancy 0.3 3%RH Temp. uniformity 2.0 Humi. uniformity 5%RH (in the center) Heat-up time +20 ~ Pull-down time 20 ~ ~ ~ ~0 30 Floor load 200 Kg/m2 Refrigeration system Safety devices dual stage refrigeration system Water-cooled hermetically sealed single stage compressor system (cascade refrigeration for HL & TL),,,,,,,, No fuse breaker, refrigerator overload relay, high pressure switch, air circulator thermal switch, protection relay, protection fuse, boil dry protector, system trouble monitor, alarm Viewing window, (50mm) cable port (50mm), chamber lamp Power supply Size Volume(mp3) Square measure(m2) S M L Other specifications available upon request Ø, 220/380/415V 10%, 50/60Hz Inside dimensions (WxHxD cm) 210x210x x210x x210x430 Outside dimensions (WxHxD cm) 325x236x x236x x236x225 5

H T-9745 PROGRAMMABLE TEMPERATURE & HUMIDITY WALK-IN CHAMBER HT-9745 HT-9745 OPTIONAL ACCESSORIES 50 100mm (140W-180Hcm) (80W-180Hcm) 0.

7 H T-9745 PROGRAMMABLE TEMPERATURE & HUMIDITY WALK-IN CHAMBER HT-9745 HT-9745 OPTIONAL ACCESSORIES mm (140W-180Hcm) (80W-180Hcm) 0.5m/s Y mm 3 Y mm 6 Cable port: Two sizes of cable port are available: 50mm and 100mm. Doors: Two types of doors are available: double swing door (140W-180Hcm) and single swing door (80W-180Hcm). Entrance curtain: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door. Floor reinforcement: A stainless steel plate prevents dents and gouges on the floor while moving the specimen. Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through the door. Entire ceiling blow-out duct: The extremely wide airinlet reduces the airflow rate (down to approx 0.5m/s) Plug socket: A waterproof plug socket is provided inside the chamber, and is attached with an individual waterproof plug. Temperature and humidity recorder: Y-100-6:100mm Temp. 3 dots, Humid. 3 dots; Y :180mm Temp. 6 dots, Humid. 6 dots. Water purifier: Provided to keep the humidifying heater and wet-bulb temperature detecting wick free from scale. 6

8 H T-1245A PROGRAMMABLE TEMPERATURE & HUMIDITY CHAMBER HT-1245A PROG. HUMIDITY CHAMBER SPECIFICATIONS Model HTL-3000A HTL-4500A HTL-8000A HTN-3000A HTN-4500A HTN-8000A HTM-3000A HTM-4500A HTM-8000A HT-3000A HT-4500A HT-8000A System Balanced temperature & humidity control system Temp. range -70~ ~ ~ ~+150 Humid range 20~98%RH Temp. constancy 0.3 Humid constancy 3%RH Temp. uniformity 1.0 Humid uniformity 3% RH in the center Heat-up time 2 1 Each 2 up needs approx. 1 min. Cool down time 1 1 Each 1 down needs approx. 1 min. Interior material SUS#304 stainless steel plate Exterior material SUS#304 stainless steel plate Insulation material Rigid polyurethane foam & glass wool Air cooled Refrigeration system dual stage refrigeration system single stage refrigeration system Safety devices no fuse breaker, refrigerator overload relay, refrigerator high pressure switch, over-temp. protector, protection fuse, water level protector, protection relay, system trouble monitor alarm Ø50mm viewing window, cable port (50 mm dia.) and chamber lamp Power supply 3Ø, AC220V~415V, 50/60Hz Inside volume (Liter) Inside Dimensions (WXDxH cm) (WXDXH cm) 3000A x100x x190x A x150x x240x A x200x x230x240 HT-1245A 7

H T-2451A XENON LONG LIFE WEATHER METER HT-2451A XENON LONG LIFE WEATHER METER / This tester is used for testing the fade/weather resistance of various industrial materials or products.

9 H T-2451A XENON LONG LIFE WEATHER METER HT-2451A XENON LONG LIFE WEATHER METER / This tester is used for testing the fade/weather resistance of various industrial materials or products. The light source of Xenon Arc is with long life and high efficiency. FEATURES Among all imitated light sources, Xenon Arc is the closest one to the sun light. 2. Available to have high efficiency lighting under a long time. 3. Filter the UV light out whose wavelength is too short, preventing test sample from being re-aged. 4. Safe, prompt and convenient long-time test. 5. Available to select Fade or Weather test. SPECIFICATION Type A B Light source Digital B.P.T. Temperature range Humidity range Xenon Arc Constantly auto matically Rt+10 ~85 30% ~ 85% RH HT-2451A Number of specimen 76 pcs Lamp life Above 2000 hr Power source 3Ø, 220 / 380 / 415 V Cooling method Air cooling Filter glass BORO/SODA LIME Xenon arc 2500W, 3500W, 4500W Specimen drum 508 mm 960 mm Drum rotation speed 3 rpm 1 rpm Inside dimension 700 x 700 x 900 mm 1100 x 1100 x 1100 mm 8

10 H T-2145A HT-2145A THERMAL SHOCK TESTING CHAMBER 10, MIL, IEC, JIS 5, LCD, The transfer time of this Thermal Shock Test Chamber is within 10 seconds, meeting MIL, IEC, JIS standards. And the recovery time of this chamber is within 5 minutes, which is available to meet various international standards. Graphic LCD display with Chinese/English dual selectioin for direct operation. Type Test area space (WxHxD) cm 35x35x40 50x40x40 60x50x50 35x35x40 50x40x40 60x50x50 35x35x40 50x40x40 60x50x50 High temp. range +80 ~ ~ ~ +200 Low temp. range -10 ~ ~ ~ -70 Test area temp. range +60 ~ ~ ~ ~ ~ ~ -65 Heat-up speed Rt ~ +200 about 25 min ( Room temp range 10 ~ 30 ) Cool-down speed Rt ~ -70 about 70 min ( Room temp range 10 ~ 30 ) Recover speed 5 Within 5 min Temp. accuracy 2 Refrigeration system full hermetic compressor semi hermetic compressor full hermetic compressor semi hermetic compressor Insulation material Valve driving apparatus Controller Safety devices : / : PU / : + PU High temp. area: High-density glass wool / Low tem. Area: rigid polyurethane foam / test area: high-density glass fiber wool + rigid Polyurethane foam pneumatic cylinder FUJI 7.7 FUJI user-friendly interface control system, 7.7 color LCD touch panel display,,,,,, over-temperature protec tion for high/low temperature area, transducer trouble detector, compressor overload protecting switch, pneumatic protection switch, water flow protection switch, 3-phase monitoring relay, Non-fuse breaker Air pressure 5 ~ 8 kg/cm2 Water pressure 2 kg/cm2 Water flow / in/out 4.2 m3/hr Water pipe diameter 11/2 inch Power 3Ø, 220 V, 75 A or 3Ø, 380 V, 60 A 3Ø, 220 V, 100 A or 3Ø, 380 V, 75 A 3Ø,220V, 75A or 3Ø,380V, 60A 3Ø, 220 V, 100 A or 3Ø, 380 V, 75 A Dimensions (WxHxD) cm 150x x x x x x x x x207 Weight kg

/ H T-2145A, HT-8753 HT-2145A THERMAL SHOCK TESTING CHAMBER T-2145A HT-8753 OZONE TEST CHAMBER ASTM D1149, D1171, D3041 / ASTM D470, D1352, D1373 The chamber is used to determine the

HT-8753 System accuracy Temperature Applied standards Net oven dimensions 3% of reading, 4% of set-point Up to 90 ASTM D1149, D1171, D3041 ASTM D470, D1352, D1373 61 51 46 cm Ozone

11 / H T-2145A, HT-8753 HT-2145A THERMAL SHOCK TESTING CHAMBER T-2145A HT-8753 OZONE TEST CHAMBER ASTM D1149, D1171, D3041 / ASTM D470, D1352, D1373 The chamber is used to determine the crack resistance for rubber products under ozone circumstance. Model A Ozone range pphm/vol ppm/vol. HT-8753 System accuracy Temperature Applied standards Net oven dimensions 3% of reading, 4% of set-point Up to 90 ASTM D1149, D1171, D3041 ASTM D470, D1352, D cm Ozone generator Quartz Ultra Violet Silent Arc Discharge Oven air velocity Inlet air flow Power In excess of 2 feet/sec 0-6 cfm cfh Static stretching apparatus 4 sets 1ø, 220V, 50/60Hz Note Made in USA Weight 182 kg 186 kg Dimensions cm 10

T) HT-8054B HT-8054B COMPUTER TYPE DET) : ASTM-D648, JIS-K7191, ISO-2507, GB/T 8802 ASTM-D648 This machine is designed and manufactured mainly according to the testing standard of ASTM D648, plus the

12 H T-8054B COMPUTER TYPE DEFLECTION TEMPERATURE BATH(H.D.T) HT-8054B HT-8054B COMPUTER TYPE DEFLECTION TEMPERATURE BATH(H.D.T) : ASTM-D648, JIS-K7191, ISO-2507, GB/T 8802 ASTM-D648 This machine is designed and manufactured mainly according to the testing standard of ASTM D648, plus the assistance of computer calculation and analysis, you can get the ultimate. Model HT-8054B-6 HT-8054B-3 Number of sample 6 6 sets 3 3 sets Bath Deformation sensor Deformation display Control method Deformation accuracy Testing modes Temp. range Temp. accuracy Heat-up rate Cooling method Power (W D H) cm Weight insulated stainless steel magnetic ruler mm computer system display, with resolution mm ( ) software control (incl. panel operation) < 0.03% F.S HDT/VICAT 20 C~300 C ( ) / ( ) cooling by compressor or water (optional) 0.5 C C / min / ( ) cooling by compressor or water (optional) 1Ø, 110/220V AC, 50/60Hz 167x73x165 About 500 kg 11

H T-8043 FREEZING TESTER HT-8043 FREEZING TESTER HT-8043H HT-8043V JIS K6545, ASTM-D1790, D1593 PVC This tester is used to test the cold resistance for the materials of rubber, plastic, cable sheath,

This tester would be excellent equipment for quality improvement. Inside the chamber there are many selections available for different test purposes. Please refer to the following table.

13 H T-8043 FREEZING TESTER HT-8043 FREEZING TESTER HT-8043H HT-8043V JIS K6545, ASTM-D1790, D1593 PVC This tester is used to test the cold resistance for the materials of rubber, plastic, cable sheath, outsole, whole shoe leather and synthetic leather, in order to understand the feathers of those materials under a freezing circumstance. This tester would be excellent equipment for quality improvement. Inside the chamber there are many selections available for different test purposes. Please refer to the following table. MODEL HT-8043H-A HT-8043V-A HT-8043H-B HT-8043V-B Temperature range RT~-30 RT~-50 Chamber size(cm) 60x60x50 60x50x60 60x60x50 60x50x60 Temperature accuracy Temperature uniformity Cooling down system 60 About 60 min. 70 About 70 min. Temperature control system SCR Digital display temperature controller + automatic balanced temperature system + SCR setup Refrigeration system Hermetic compressor, air-cooled even-temperature adjusting control, compressor protection setup of startup under low temperature, CFC refrigerant Chamber structure Power Stainlesssteel SUS#304 plate for interior and exterior, rigid polyurethane foam as insulating material, internally reinforced structure design 1Ø, 220V, 50Hz A,B,C,D,E,F,G,H In-chamber fixtures can be ordered by options A, B, C, D, E, F, G, H as per our footwear catalog, at extra charges. 12

H T-8046, HT-8047 AGING OVEN TESTER HT-8046 GE

JIS-K 7212, K 6723, K6301 ASTM-D2436, D573 UL-746B IEC-540 BS-6746,903 ISO/DIS 4577 SPECIFICATION This tester is designed to test the aging resistance specially for rubber, plastic and some insulator

e. Seal of heat-isolation of testing chamber. f. Special adjusting apparatus of air exchange. g.

14 H T-8046, HT-8047 AGING OVEN TESTER HT-8046 GEER'S AGING OVEN TESTER A. B. C. D. E. F. G. JIS-K 7212, K 6723, K6301 ASTM-D2436, D573 UL-746B IEC-540 BS-6746,903 ISO/DIS 4577 SPECIFICATION This tester is designed to test the aging resistance specially for rubber, plastic and some insulator materials. Different from normal aging oven, this tester has: a. Temperature constancy b. Temperature uniformity c. Heat-up speed after door open. d. Wind speed & air exchange rate of testingchamber. e. Seal of heat-isolation of testing chamber. f. Special adjusting apparatus of air exchange. g. Conform to testing norms: JIS K-7212, K-6723,K-6301, ASTM D-2436, D-573 UL-746B,IEC-540,BS- 6746,903,ISO/DIS 4577 Model A B Inner dimension (WxHxD) 450x450x450 mm 600x600x600 mm Temp. range RT ~ +200 C RT ~ +300 C Temperature indication 0.3 C Temperature uniformity 0.5% Rotation speed 8-10 rpm Air refresh option1: 1-10 times/hour option2: times/hour Power consumption 220V single phase 5KW 220V single phase 7KW 1. square shelves x (2 pcs) 2. test specimen x (2 pcs) 3. running meter x (1pcs) 4. time meter x (1 pcs) Optional air flow meter (recorder) Measuring method of air change This method measures the air change rate of the std type oven as follows: equation N = 3590 ( X - Y ) 2 V D T where N : Number of change of air per hour. X : Power consumption during air change (W). Y : Power consumption during no air change(w). V : total volume of over (cm3). D : Density of over ambient air (g/cm3). T : Temperature difference inside/outside over( ) HT-8046 HT-8047 AGING OVEN TESTER JIS K-630, K-7212, ASTM D-2436, E-145, JTTC SPEC.-151 CNS The oven is used for degradation study of plastics & rubber when subjected to heat in a rotational condition for a specified time. One day test at 70 is theoretically equivalent to a six-month usage in normal environmental condition. The machine is equipped with a motor-driven rotary plate. Hot air circulation will ensure even temperature distribution. HT

H T-8052 SALT SPRAY TESTER HT-8052 SALT SPRAY TESTER CNS-4158 The salt spray corrosion tester is used to test the corrosion resistance of all kinds of metals whether plated or organic coated or

15 H T-8052 SALT SPRAY TESTER HT-8052 SALT SPRAY TESTER CNS-4158 The salt spray corrosion tester is used to test the corrosion resistance of all kinds of metals whether plated or organic coated or inorganic coated by exposing to atomized salt solution. Check if the specimen has the conditions of denting, rusting, cracking or blister after test. Features 1. P.V.C. 2. ( 1 C) ml/80cm2-H P.I.D. 0.5 C Spray tube warranty testing: 2000 hours. 2. All functions setting are included in one control panel. 3. Over heating protection device and water warning device are installed. 4. Digital temperature control. (SSR control accuracy 1 ) 5. Tank capacity: 251 salt solution. SYSTEM DIAGRAM 6. Mist spray distributed evenly. 7. Full self-diagnostic alarm & trouble display. HT-8052 SPECIFICATIONS HT-8052 Salt Spray Tester Model HT-8052A HT-8052B HT-8052C Test temperature 35 1 / / /50 1 Inside dimension (cm) (WxHxL) (WxHxL) (WxHxL) Test specimen 15 /30 136PCS/136PCS 48PCS/30PCS 24PCS/15PCS Power consumption 220V1Ø15KW 220V1Ø6KW 220V1Ø3KW Air compressor to be prepared by buyer 14

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt E15-3D1 Compact 4-Way Cassette type MMU-AP0071MH2UL MMU-AP0091MH2UL MMU-AP0121MH2UL MMU-AP0151MH2UL MMU-AP0181MH2UL Contents 1. Specifications 2. Dimensions 3. Center of gravity 4. Piping diagram 5. Wiring