Gem-tech Dot matrix type LCM (2015-05-21) Product No. Controler Tech. V.A. A.A Dot size Module Size GTG-98641V3 NT7534 TAB NONE 31.0 22.5 26.739 19.185 0.258 0.285 34.0 64.5 GTG-12232IV2 SBN1661G_M18 COB LED/Y-G BOTTOM 60.5 18.5 53.64 15.64 0.40 0.45 80.0 36.0 GTG-12232IV4 SBN1661G_M18 COB LED/WHITE EDGE 60.5 18.5 53.64 15.64 0.40 0.45 80.0 36.0 GTG-128324 ST7920 COB LED/Y-G BOTTOM 60.0 18.0 55.0 15.64 0.39 0.45 84.0 44.0 GTG-128648V16 AIP31108 COB LED/WHITE EDGE 62.0 44.6 56.27 38.35 0.39 0.55 78.0 70.0 GTG-128648V17 AIP31108 COB LED/Y-G EDGE 62.0 44.6 56.27 38.35 0.39 0.55 78.0 70.0 GTG-12864A RA6963 COB LED/Y-G EDGE 62.0 44.6 56.27 38.35 0.39 0.55 78.0 70.0 GTG-12864K AIP31108 COB LED/Y-G BOTTOM 71.7 39.0 66.52 33.24 0.48 0.48 93.0 70.0 GTG-12864KV32 AIP31108 COB LED/WHITE EDGE 71.7 39.0 66.52 33.24 0.48 0.48 93.0 70.0 GTG-12864KV35 AIP31108 COB LED/Y-G EDGE 71.7 39.0 66.52 33.24 0.48 0.48 93.0 70.0 GTG-12864LV2 AIP31108 COB LED/Y-G EDGE 59.4 38.0 56.28 33.24 0.40 0.48 84.0 60.0 GTG-12864SV10 AIP31108 COB LED/WHITE EDGE 43.5 29.0 40.92 26.92 0.28 0.35 54.0 50.0 GTG-128961 ST7541 COG LED/Y-G EDGE 76.0 56.5 72.94 54.7 0.55 0.55 101.6 70.2 GTG-1281286 UC1617W COG LED/WHITE EDGE 63.0 47.0 55.66 44.78 0.415 0.33 86.5 63.5 GTG-160321 SBN0080G_S02 COB LED/Y-G BOTTOM 99.0 24.0 94.36 18.84 0.55 0.55 116.0 44.0 GTG-160324 SBN0080G_S02 COB LED/WHITE EDGE 99.0 24.0 94.36 18.84 0.55 0.55 116.0 44.0 GTG-160807 LC7981 COB LED/Y-G EDGE 72.3 37.8 67.17 33.57 0.39 0.39 100.0 54.0 GTG-1601281V9 RA6963 COB LED/WHITE EDGE 101.0 82.0 92.76 74.20 0.54 0.54 129.0 106.0 GTG-1601606V4 UC1698 COG LED/WHITE EDGE 60.0 60.0 54.38 54.38 0.32 0.32 82.2 77.5 GTG-1601606V7 UC1698 COG LED/WHITE EDGE 61.0 61.0 54.38 54.38 0.32 0.32 66.0 72.7 GTG-1601606V8 UC1698 COG LED/WHITE EDGE 60.0 60.0 54.38 54.38 0.32 0.32 82.8 78.5 GTG-1601606V9 UC1698 COG LED/WHITE EDGE 60.0 60.0 54.38 54.38 0.32 0.32 82.8 78.5 GTG-192483 AIP31108 COB LED/WHITE EDGE 99.0 24.0 94.03 22.03 0.44 0.41 132.0 56.5 GTG-192642V6 AIP31108 COB LED/WHITE EDGE 97.0 48.0 92.12 42.20 0.44 0.62 113.0 71.0 GTG-192644 AIP31108 COB LED Y/G /EL 100.0 37.0 95.96 31.96 0.46 0.46 120.0 62.0 GTG-192645V6 AIP31108 COB LED/BOTTOM Y-G 85.2 33.0 78.67 26.19 0.36 0.36 100.0 60.0 GTG-192646V32 SBN0064 COB LED/Y-G EDGE 103.5 39.0 95.96 31.96 0.46 0.46 128.0 63.0 GTG-19264E AIP31108 COB LED/WHITE EDGE 110.0 37.7 103.65 34.53 0.51 0.51 145.0 72.3 GTG-240645V3 RA6963 COB LED/Y-G EDGE 132.0 39.0 127.16 33.88 0.49 0.49 180.0 65.0 GTG-2401283V3 LC7981 COB LED/WHITE EDGE 124.0 70.0 119.97 63.97 0.47 0.47 159.4 101.0 GTG-2401283V4 RA6963 COB LED/WHITE EDGE 124.0 70.0 119.97 63.97 0.47 0.47 159.4 101.0 GTG-2401286V2 RA6963 COB LED/WHITE EDGE 114.0 64.0 107.95 57.55 0.40 0.40 144.0 104.0 GTG-2401601V5 RA8802 COB LED/Y-G EDGE 104.0 78.3 93.57 68.77 0.36 0.40 137.0 97.0 GTG-3202406V5 RA8835 TAB NONE 119.2 90.4 115.17 86.37 0.33 0.33 158.5 109.0
GTG-98641V3 LCD MODULE GEM-TECH ELEC. CO., LTD 1 1 /CS L Chip select 2 RES L Reset signal 3 A0 H/L Data/Command 4 SCL H/L CLOCK 5 SI H/L Data 6 VDD - Power supply 7 VSS - Power supply (GND) 8 VSS - Power supply (GND) LCD Display mode Fstn-Transflective-Positive Driving method 1/65duty, 1/9 bias None Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.3VDD Vlcd 10.0
GTG-12232IV2 LCD MODULE GEM-TECH ELEC. CO., LTD NO&EL B/L LED B/L H1 4.4 8.9 H2 8.8MAX 13.5MAX LCD Display mode STN-Transmissive-Negative-Blue Driving method 1/32 Buty, 1/5 Bias LED Y/G BOTTOM Input Vih 0.7VDD VDD Output Vil 0 0.3VDD Vlcd 6.5 1 VSS - Power supply (GND) 2 VDD - Power supply 3 NC - No connect 4 A0 H/L Data/Command 5 E1 H Enable Signal for IC1 6 E2 H Enable Signal for IC2 7 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 8-15 DB0- H/L 16 /RST L Reset signal 17 LED+ - Power supply for LED B/L 18 LED- - Power supply for LED B/L 19 NC - No connect 20 NC - No connect Condition Forward If 100 120 Vf=5.0 Luminous IV TBD Yellow-Green
GTG-12232IV4 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode FSTN-Transmissive-Negative Driving method 1/32 Buty, 1/5 Bias LED White Input Vih 0.7VDD VDD Output Vil 0 0.3VDD Vlcd 6.5 1 VSS - Power supply (GND) 2 VDD - Power supply 3 NC - No connect 4 A0 H/L Data/Command 5 E1 H Enable Signal for IC1 6 E2 H Enable Signal for IC2 7 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 8-15 DB0- H/L 16 /RST L Reset signal 17 LED+ - Power supply for LED B/L 18 LED- - Power supply for LED B/L 19 NC - No connect 20 NC - No connect Condition Forward If 30 Vf=5.0 Luminous IV 300 White
GTG-128324 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/33duty, 1/5 bias LED Bottom Y/G Input Vih 0.7VDD VDD Output Vil 0 0.3VDD Vlcd 6.0 1 VSS - Power supply (GND) 2 VDD - Power supply 3 NC - No connect 4 RS H/L Data/Command 5 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 6 E H Enable Signal DB0- H/L 7-14 5 PSB H/L H: Parallel mode L: Serial mode 16 /RST L Reset signal 17 LED- - Power supply for LED B/L 18 LED+ - Power supply for LED B/L Condition Forward If 90 120 Vf=5.0V Luminous IV 200 Yellow-Green
GTG-128648V16 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transmissive-Negative-Blue Driving method 1/64duty, 1/9 bias LED WHITE Input Vih 0.7VDD VDD Output Vil 0 0.3VDD Vlcd 10.5 1 /CS1 L Chip select for IC1 2 /CS2 L Chip select for IC2 3 VSS - Power supply (GND) 4 VDD - Power supply 5 Vo - Contrast adjust 6 D/I H/L Data/Command 7 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 8 E H Enable signal 9-16 DB0- H/L 17 /RST L Reset signal 18 Vout - Negative voltage output 19 LED+ - Power supply for LED B/L 20 LED- - Power supply for LED B/L Condition Forward If 52 Vf= 5V Luminous IV 350 White
GTG-128648V17 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/64duty, 1/9 bias LED YELLOW-GREEN EDGE Input Vih 0.7VDD VDD Output Vil 0 0.3VDD Vlcd 10.5 1 /CS1 L Chip select for IC1 2 /CS2 L Chip select for IC2 3 VSS - Power supply (GND) 4 VDD - Power supply 5 Vo - Contrast adjust 6 D/I H/L Data/Command 7 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 8 E H Enable signal 9-16 DB0- H/L 17 /RST L Reset signal 18 Vout - Negative voltage output 19 LED+ - Power supply for LED B/L 20 LED- - Power supply for LED B/L Condition Forward If 52 Vf= 5V Luminous IV 350 Yellow-Green
GTG-12864A LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/64duty, 1/9 bias LED Y/G Input Vih 0.7VDD VDD Output Vil 0 0.3VDD Vlcd 10.5 1 FG - Frame ground 2 VSS - Power supply (GND) 3 VDD - Power supply 4 Vo - Power supply for LCD 5 /WR L Write signal 6 /RD L Read signal 7 /CE L Chip select 8 C/D H/L Command/Data 9 /RST L Reset signal 10-17 DB0- H/L 18 FS H/L Font select 19 LED- - Power supply for LED B/L 20 LED+ - Power supply for LED B/L Condition Forward Voltage (V) Vf 4.2 4.4 If= 120mA Luminous IV 80 Yellow-Green
GTG-12864K LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/64duty, 1/9 bias LED, Y/G, BOTTOM Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 11.0 1 VSS - Power supply (GND) 2 VDD - Power supply 3 Vo - Contrast adjust 4 D/I H/L Data/Command 5 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 6 E H Enable signal 7-14 DB0- H/L 15 CS1 H Chip select for IC1 16 CS2 H Chip select for IC2 17 /RST L Reset signal 18 Vout - Negative voltage output 19 LED+ - Power supply for LED B/L 20 LED- - Power supply for LED B/L Condition Forward If 200 Vf= 5V Luminous IV 130 Vf= 5V Y/G
GTG-12864KV32 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transmissive-negative-blue Driving method 1/64duty, 1/9 bias LED, White Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 11.0 1 VSS - Power supply (GND) 2 VDD - Power supply 3 Vo - Contrast adjust 4 D/I H/L Data/Command 5 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 6 E H Enable signal 7-14 DB0- H/L 15 CS1 H Chip select for IC1 16 CS2 H Chip select for IC2 17 /RST L Reset signal 18 Vout - Negative voltage output 19 LED+ - Power supply for LED B/L 20 LED- - Power supply for LED B/L Condition Forward If 45 Vf= 5V Luminous IV 400 Vf= 5V White
GTG-12864KV35 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/64duty, 1/9 bias LED, Y/G, edge Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 11.0 1 VSS - Power supply (GND) 2 VDD - Power supply 3 Vo - Contrast adjust 4 D/I H/L Data/Command 5 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 6 E H Enable signal 7-14 DB0- H/L 15 CS1 H Chip select for IC1 16 CS2 H Chip select for IC2 17 /RST L Reset signal 18 Vout - Negative voltage output 19 LED+ - Power supply for LED B/L 20 LED- - Power supply for LED B/L Condition Forward If 200 Vf= 5V Luminous IV 30 Vf= 5V Y/G
GTG-12864LV2 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/64duty, 1/9 bias LED, Y/G, EDGE Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 12.5 1-8 - DB0 H/L 9 E H Enable signal 10 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 11 D/I H/L Data/Command 12 NC - 13 VDD - Power supply 14 VSS - Power supply (GND) 15 LED- - Power supply for LED B/L 16 LED+ - Power supply for LED B/L 17 /CS1 L Chip select for IC1 18 /CS2 L Chip select for IC2 Condition Forward Vf If=100mA Voltage (V) Luminous IV 40 Yellow-Green
GTG-12864SV10 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transmissive-Negative-Blue Driving method 1/64duty, 1/9 bias LED, WHITE, EDGE Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 8.9 1 VSS - Power supply (GND) 2 VDD - Power supply 3 Vo - Contrast adjust 4 D/I H/L Data/Command 5 R/W H/L H: Read(Module to Mpu) L: Write(Mpu to Module) 6 E H Enable signal 7-14 DB0- H/L 15 CS1 H Chip select for IC1 16 CS2 H Chip select for IC2 17 /RST L Reset signal 18 Vout - Negative voltage output 19 LED+ - Power supply for LED B/L 20 LED- - Power supply for LED B/L Condition Forward If 52 64 Vf= 5V Luminous IV 800 Vf= 5V WHITE
GTG-128961 LCD MODULE GEM-TECH ELEC. CO., LTD 1 26 (+) (-) LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/96duty, 1/10 bias LED, Y/G EDGE Logic Power Supply VDD 3.0 Input Vih 0.7VDD VDD Output Vil 0 0.3VDD Vlcd 9.9 1-5 V0-V4 - POWER SUPPLY(LCD) 6 Vout - POWER SUPPLY(LCD) 7-14 - DB0 H/L 15 /RD L Read Signal 16 /WR L Write Signal 17 A0 H/L Data/Command 18 /RST L Reset signal 19 /CS L Chip select 20 VSS - Power supply (GND) 21 VDD - Power supply 22-26 VSS - Power supply (GND) Condition Forward If 60 Vf=4.6 V Luminous IV 40 Yellow-Green
GTG-1281286 LCD MODULE GEM-TECH ELEC. CO., LTD 128X128 DOTS LCD Display mode FSTN-Transflective-Positive Driving method 1/128duty, 1/11 bias LED, White Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 14.0 1~6/ NC No connection 12/14 7 SCK - CLOCK 8 SDA H/L Data 9/11/1 3/18 GND - Power supply (GND) 10 RS H/L Command/Data 15 /CS L Enable signal 16 /REST L Reset signal 17 VCC - Power supply 19 A - LED Power supply A 20 K - LED Power supply K Condition Forward If 52 Vf=3.3V Luminous IV 600 White
GTG-160321 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/48duty, 1/6 bias LED, Bottom, Y/G Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 6.5 1 A0 H/L H: Display data L: Instruction code 2 /CS2 L Chip selection for IC2 3 /CS1 L Chip selection for IC1 4 /RD L Data/status read 5 /WR L Data/instruction write 6 VDD - Power supply 7 Vss - Power supply(gnd) 8-15 DB0-D line H/L B7 16 RST L Reset signal 17 Vo - Contrast adjust 18 VOUT - Negative voltage output 19 A - Power supply for LED B/L(+) 20 K - Power supply for LED B/L(-) Condition Forward Vf 4.2 4.6 If=360mA Voltage (V) Luminous IV 120 Yellow-Green
GTG-160324 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transmissive-Negative-Blue Driving method 1/48duty, 1/6 bias LED, White Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 6.5 1 A0 H/L H: Display data L: Instruction code 2 /CS2 L Chip selection for IC2 3 /CS1 L Chip selection for IC1 4 /RD L Data/status read 5 /WR L Data/instruction write 6 VDD - Power supply 7 Vss - Power supply(gnd) 8-15 DB0-D line H/L B7 16 RST L Reset signal 17 Vo - Contrast adjust 18 VOUT - Negative voltage output 19 A - Power supply for LED B/L(+) 20 K - Power supply for LED B/L(-) Condition Forward If 26 Vf=5.0V Luminous IV 300 White
GTG-160807 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/80duty, 1/10 bias LED White Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 12.0 1 Vss - GROUND 2 VDD - POWER SUPPLY FOR LOGIC 3 Vo - CONTRAST ADJUST 4 RS H/L H:-INSTRUCTION REGISTER L:-DATA REGISTER 5 R/W L H: READ; W: WRITE 6 E L ENABLE SIGNAL 7-14 DB0 H/L DATA BUS 15 /CS L CHIP ENABLE SIGNAL 16 /RST L RESET SIGNAL 17 VEE - NEGATIVE VOLTAGE SUPPLY FOR LCD 18 NC - NO CONNECTION 19 A - LED Power supply A 20 K - LED Power supply K Condition Forward If 21 Vf=12 V Luminous IV 450 Yellow-Green
GTG-1601281V9 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode FSTN-Transflective-Positive Driving method 1/128duty, 1/12 bias LED, White Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 16.3 1 FG - Frame Ground 2 Vss - Ground 3 VDD - Power Supply for Lofic 4 Vo - Contrast Adjust 5 Vout - Negative Voltage Output 6 /WR L Write Signal 7 /RD L Read Signal 8 /CE L Chip Enable 9 C/D H/L Write: H: Commad Write, L-Data Write Read:H-Status Read, L-Data Read 10 /HALT L Sleep mode enable 11 /RST L Reset signal 12 - DB0 - H/L Data Bus 19 20 LED+ - Power Supply for B/L Condition Forward If 135 Vf= 5.0 V Luminous IV 360 White
GTG-1601606V4 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode FSTN-Transflective-Positive Driving method 1/160duty, 1/10 bias LED, White Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 16.5 1 Vss - Power supply (GND) 2 RS H/L Data/Command 3 WR H/L Write 4 RD H/L Read 5 /CS L Chip select 6 /RST L Reset signal 7 VDD - Power supply 8-15 DB0- H/L 16 LEDK - LED Power supply K 17 NC - No connection 18 LEDA - LED Power supply A Condition Forward If 90 Vf=3.3V Luminous IV 400 White
GTG-1601606V7 LCD MODULE GEM-TECH ELEC. CO., LTD B B 元件贴装区域 补强板面电极面 16 1 补强板 LCD Display mode FSTN-Transflective-Positive Driving method 1/160duty, 1/10 bias LED, White Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 16.5 1 Vss - Power supply (GND) 2 RS H/L Data/Command 3 WR H/L Write 4 RD H/L Read 5 /CS L Chip select 6 /RST L Reset signal 7 VDD - Power supply 8-15 DB0- H/L 16 TST4 - Do not use Condition Forward If 60 Vf=3.3V Luminous IV 400 White
GTG-1601606V8 LCD MODULE GEM-TECH ELEC. CO., LTD JS-2001-2 LCD Display mode FSTN-Transflective-Positive Driving method 1/160duty, 1/10 bias LED, White Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 16.5 CN1: 1 Vss - Power supply (GND) 2 RS H/L Data/Command 3 WR H/L Write 4 RD H/L Read 5 /CS L Chip select 6 /RST L Reset signal 7 VDD - Power supply 8-15 DB0- H/L 16 LEDK - LED Power supply K 17 NC - No connection 18 LEDA - LED Power supply A CN2: 1 V- 0V Power supply for heater 2 V+ +5V Power supply for heater Condition Forward If 90 Vf=3.3V Luminous IV 400 White
GTG-1601606V9 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode FSTN-Transflective-Positive Driving method 1/160duty, 1/10 bias LED, White Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 16.5 1 Vss - Power supply (GND) 2 RS H/L Data/Command 3 WR H/L Write 4 RD H/L Read 5 /CS L Chip select 6 /RST L Reset signal 7 VDD - Power supply 8-15 DB0- H/L 16 LEDK - LED Power supply K 17 NC - No connection 18 LEDA - LED Power supply A Condition Forward If 90 Vf=3.3V Luminous IV 400 White 7. ABSOLUTE MAXIMUM RATINGS Unit Operating Topr -40-70 o C Temperature Storage Temperature Tstg -40-80 o C
GTG-192483 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Gray Driving method 1/48duty, 1/7 bias LED Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 9.0 J1 Name Level Functions 1 Vss 0V Power supply(gnd) 2 VDD 5.0V Power supply 3 Vo Contrast Adjust 4 RS H/L H: Display data L: Instruction code 5 R/W H/L H: Data/status read L: Data/instruction write 6 E H, H/L Chip enable signal 7~14 DB0-D B7 H/L line 15 BLA - Power supply for LED backlight 16 Reset L Reset Signal Condition Forward If 60 72 Vf=5.0V Luminous IV 320 White
GTG-192642V6 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode FSTN-Transflective-Positive Driving method 1/64duty, 1/9 bias LED White Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 8.7 1 Vss 0V Power supply(gnd) 2 VDD 5.0V Power supply 3 Vo Contrast Adjust 4 D/I H/L H: Display data L: Instruction code 5 R/W H/L H: Data/status read L: Data/instruction write 6 E H, H/L Chip enable signal 7~14 DB0- H/L line 15 CS1 H Chip selection for IC1 16 CS2 H Chip selection for IC2 17 CS3 H Chip selection for IC3 18 Reset L Reset Signal 19 VOUT - Negative Voltage Output 20 LED+ - Power supply For LED B/L Condition Forward If 120 Vf=5.0V Luminous IV 360 Yellow-Green
GTG-192644 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode FSTN-Transflective-Positive Driving method 1/64duty, 1/9 bias LED Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 10.0 1 Vss 0V Power supply(gnd) 2 VDD 5.0V Power supply 3 Vo Contrast Adjust 4 VOUT - Negative Voltage Output 5 RS H/L H: Display data L: Instruction code 6 R/W H/L H: Data/status read L: Data/instruction write 7 E H, H/L Chip enable signal 8~15 DB0- H/L line 16 CS1 L Chip selection for IC1 17 CS2 L Chip selection for IC2 18 CS3 L Chip selection for IC3 19 Reset L Reset Signal 20 A - Back light power (EL1) 21 K (EL2) - Back light power Condition Forward Vf 4.2 4.4 If=370mA Voltage (V) Luminous IV 120 Yellow-Green
GTG-192645V6 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/64duty, 1/9 bias LED Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 13.0 1 Vss 0V Power supply(gnd) 2 VDD 5.0V Power supply 3 Vo - Contrast Adjust 4 RS H/L H: Display data L: Instruction code 5 R/W H/L H: Data/status read L: Data/instruction write 6 E H, H/L Chip enable signal 7~14 -D B0 H/L line 15 CS3 L Chip select for IC3 16 Reset L Reset Signal 17 CS2 L Chip select for IC2 18 CS1 L Chip select for IC1 19 Vout - Negativ Voltage Output 20 SLA - LED+ Condition Forward If 280 Vf=5.0V Luminous IV 120 Yellow-Green
GTG-192646V32 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/64duty, 1/9 bias LED Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 9.0 1 Vss 0V Power supply(gnd) 2 VDD 5.0V Power supply 3 Vo - Contrast Adjust 4 RS H/L H: Display data L: Instruction code 5 R/W H/L H: Data/status read L: Data/instruction write 6 E H, H/L Chip enable signal 7~14 - H/L line DB0 15 CS1 L Chip select for IC1 16 Reset L Reset Signal 17 CS2 L Chip select for IC2 18 CS3 L Chip select for IC3 19 Vout - Negativ Voltage Output 20 SLA - LED+ Condition Forward If 26 Vf=5.0V Luminous IV 180 Yellow-Green
GTG-19264E LCD MODULE GEM-TECH ELEC. CO., LTD Detail A SCALE 5:1 192 X 64 DOTS 20 2 19 1 20-Ø1.00(PTH) LCD Display mode STN-Transmissive-Negative-blue Driving method 1/64duty, 1/9 bias LED Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 13.2 1 GND 0V Power supply(gnd) 2 VDD 5.0V Power supply 3 VO Contrast Adjust 4 RS H/L H: Display data L: Instruction code 5 R/W H/L H: Data/status read L: Data/instruction write 6 E H, H/L Chip enable signal 7~14 DB0- H/L line 15 CSA H/L 16 CSB H/L CSA=L,CSB=L: Left CSA=L,CSB=H: Middle CSA=H,CSB=L: Right 17 /RES L Reset Signal 18 Vout - Negative Voltage Output 19 LED+ - Power Supply for 20 LED- - Power Supply for Condition Forward If 300 Vf= 5.0 V Luminous IV 96 White
GTG-2401283V3 LCD MODULE GEM-TECH ELEC. CO., LTD 1 LCD Display mode FSTN-Transmissive-Negative Driving method 1/128 duty, 1/12 bias LED White Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 15.6 1 Vss - Power supply (GND) 2 VDD - Power supply 3 Vo - Contrast adjust 4 RS H/L Data/Command 5 R/W H/L Read/Write 6 E L Enable signal 7-14 DB0- H/L 15 /CE L Chip enable 16 /RST L Reset signal 17 VEE - Power supply for LCD driving 18 /DISP L OFF Display off 19 NC - No connect 20 NC - No connect Condition Forward If 180 Vf=5.0V Luminous IV 450 White
GTG-2401283V4 LCD MODULE GEM-TECH ELEC. CO., LTD 1 LCD Display mode FSTN-Transmissive-Negative Driving method 1/128 duty, 1/12 bias LED White Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 15.6 1 Vss - Power supply (GND) 2 VDD - Power supply 3 Vo - Contrast adjust 4 C/D H/L Command/Data 5 /WR L Write signal 6 /RD L Read signal 7-14 DB0- H/L 15 /CE L Chip enable 16 /RST L Reset signal 17 VOUT - Negative voltage output 18 /DISP L OFF Display off 19 FS H/L Font select 20 NC - No connect Condition Forward If 180 Vf=5.0V Luminous IV 450 White
GTG-2401286V2 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transmissive-Negative-Blue Driving method 1/128 duty, 1/12 bias LED White Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 15.5 1 FG - Frame ground 2 GND - Power supply (GND) 3 VDD - Power supply 4 Vo - Contrast adjust 5 /WR L Data write 6 /RD L Data read 7 /CE L Enable signal 8 C/D H/L Command/Data 9 nc - No connect 10 /RST L Reset signal 11 DB0-18 BD7 H/L 19 FS H/L Font selection: H:6x8, L:8x8 20 Vout - Negative voltage output 21 A - Power supply for LED backlight (+) 22 K - Power supply for LED backlight (-) Condition Forward If 120 Vf=5.0V Luminous IV 260 White
GTG-2401601V5 LCD MODULE GEM-TECH ELEC. CO., LTD LCD Display mode STN-Transflective-Positive-Y/G Driving method 1/160duty, 1/13 bias LED Y/G Logic Power Supply VDD 3.3 Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 10.0 1 GND - Power supply(ground) 2 VDD - Power supply 3 VO - Contrast Adjust 4 RS H/L Register select 5 /WR L Data write 6 /RD L Data read 7 14 DB0 - BD7 H/L 15 CS L Choice chip signal 16 NC H/L Start line marker 17 /RST L Reset signal 18 VOUT - Negative voltage output 19 A - Power supply for LED B/L 20 K - Power supply for LED B/L Condition Forward If 160 Vf=5.0 V Luminous IV 50 Yellow-Green
GTG-3202406V5 LCD MODULE GEM-TECH ELEC. CO., LTD PCB LCD Display mode FSTN-Reflective-Positive Driving method 1/240 duty, 1/16 bias None Input Vih 0.7VDD VDD Output Vil 0 0.6 Vlcd 24.0 1 GND (VSS) - Power supply (GND) 2 VDD - Power supply 3 Vo - Contrast adjust 4 A0 H/L Register select 5 /WR L Data write 6 /RD L Data read 7-14 DB0 - BD7 H/L 15 /CE L Enable signal 16 VO2 - Contrast adjust voltage output 17 /RST L Reset signal 18 Vout - DC-DC voltage output 19-20 nc - No connection 6, POWER SUPPLY CIRCUIT AND CONTRAST ADJUST(Recommend)
GT G - 122 32 6 VXX - T R 6 N 0 C (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (1) Hebei Gem-Tech Electronics Co., Ltd GT Abbr. of GEM-TECH (2) LCD Module Type C Character Type G Graphic Type K Customized Type (3) Numbers of Characters each row Character Type: Numbers of Dots each row Graphic Type: (4) Numbers of rows Character Type Graphic Type: or (5) Serial No. 1-9, A-Z (6) Derive Version Serial No. VX or VXX (V2, V3, V3, V5, ) (7) LCD Mode T TN H HTN V VATN Y STN Y/G G STN GREY B STN BLUE F FSTN (8) LCD Polarizer Type R Reflective T Transmissive S Transflective (9) Viewing directions 3-3:00 6-6:00 9-9:00 C - 12:00 (10) BKL Option N w/o BKL L LED BKL (11) Operation/Storage Temperature (Top: Operation Temperature Tst: Storage Temperature E EL C CCFL (EOL due to RoHS) 0 Top: 0 ~ +50, and Tst: -10 ~ +60 1 Top: -10 ~ +60, and/or Tst: -20 ~ +70 2 Top: -20 ~ +70, and/or Tst: -30 ~ +80 3 Top: -30 ~ +80, and/or Tst: -35 ~ +85 *Either Top or Tst reaches a wider temperature range then above listed, then it s named according the wider temperature range. e.g. Top: -10~+60, Tst: -35~85. Then, it s named 3. (12) Production Technology C COB S SMT H Heat seal G COG T TAB
河北冀诚电子有限公司 ( 大陆工厂 ) 地址 : 河北省石家庄市新市北路 368 号创新大厦 8 楼 Hebei Gem-tech Electronics Co., Ltd. FL.8 Chuangxin BLD,No.368 North Xinshi Road, Shijiazhuang, Hebei, China. P.C.: 050091 Tel.: +86 311 8381 5999, 8381 6999 Fax.: +86 311 8383 1999 深圳销售公司 ( 深圳宾康实业有限公司 ) 地址 : 深圳市福田区沙嘴路金地工业园 Shenzhen Pantage Industrial Co.,Ltd Addr.: Industrial Park, Shazui Road, Futian, Shenzhen, China. Tel.: +86 755 83742929 Fax.: +86 755 83742919 上海办事处 (Shanghai Office) 地址 : 上海徐汇区天钥桥路 Addr.: Tianyaoqiao Road, Xuhui Zone, Shanghai, China. Mobile: 13081000283 香港销售公司 ( 香港宾康实业有限公司 ) 地址 : 香港九龙湾宏照道 11 号 Pantage Limited Addr.: No. 11 Wang Chiu Road, Kowloon Bay, Hong Kong. Tel.: +852 27518691 Fax.: +852 27965670 Confidential This information contained herein is the exclusive property of Gem-tech and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Gem-tech. Subject to change without notice. Please think of the environment before printing this file.