WUXI TIANLI BEARING O.LTD SHANGHAI WEIYA INDUSTRY O.LTD BRIEF INTRODUTION and dedicate to the bearing production of the following : 1) Spherical Plain s 2) Rod Ends 3) Rod Ends with Stud 4) Hydraulic Rod Ends The bearing are used in the textile machinery,printing machinery,electric power transportation,medical industries, automotive industries,aerospace industries and apparatus. The bearing are the products of the finest materials,good quality,perfect performance long service life and competive price.proven technologues and manufacturing mathods provide our customers in Europe,North America and Asia. and welcome all visits to our factory and opportunities to serve our customes with the finest products for your needs. Factory Address: No.11,hunxun West RD,Xishan Development Area,Wuxi,hina. Post:214101 Tel:+86-510-88266831,88266829,88266821 Fax:+86-510-88266830 Sales Department Address: 12F Yinqiao Building,58 Jinxin RD, Jinqiao area,pudong,shanghai,hina Tel:+86-21-58540259 Fax:+86-21-58543993 http: www.sh-weiya.com
无锡东出口 The situation of Wuxi Tianli o.ltd 11,hunxun West RD North The Youyi RD. The hunxun RD. The Wuxi Realway Station The Taihu RD. 陇海铁路 宁沪高速 The situation of Sales Department 上海火车站 虹桥国际机场 地铁 1# 线 地铁 2# 线 Shanghai Weiya Industry o.ltd 58 Jinxin RD 金新路 North 杨高中路 金桥路 环东二大道 环南一大道 磁浮 迎宾大道 浦东国际机场 - 2 -
ontent & Interchange Table of Number Type Itme No. Description Name Inner Diameter Range Sliding ontact Surface Page 1-1-1 1-1-2 1-1-3 Steel -onsteel type GE..E GE..ES GE..ES- 2RS GEG..ES GEZ..ES 6-300 mm Steel 10-12 1-1-4 GEEW..ES 12-320 mm 13 Spherical Plain 1-2-1 1-2-2 1-2-3 Inch Sphercial Maintenance -free Sphercial Bushings OM OM..T GE.. GEG.. GHM -T 0.19-1 inch 5-35 mm 0.25-1 inch Steel Steel 14 15 16 1-3 Pilloball Sphercial Bushing Insert type GEBK 5-35 mm Bronze 17 Rod Ends 2-1-1-1 Maintenance -Free Rod Ends SI..T/K 5-35 mm 18-3 -
Type Itme No. Description Name Inner Diameter Range Sliding ontact Surface Page 2-1-1-2 Maintenance -Free Rod Ends SA..T/K 5-35 mm 19 2-1-2-1 PHS.. 20 5-35 mm 2-1-2-2 POS.. Lubricant type Rod Ends Bronze 21 Rod Ends 2-1-3-1 PHSB.. 22 0.19-1 Inch 2-1-3-2 POSB.. 23 2-1-4-1 Maintenance -Free Rod Ends SI.. 24 5-35 mm 2-1-4-2 SA.. 25 2-1-5-1 Lubricant type Rod Ends SI..ES 5-60 mm Steel 26-4 -
Type Itme No. Description Name Inner Diameter Range Sliding ontact Surface Page 2-1-5-2 Lubricant type Rod Ends SA..ES 5-60 mm Steel 27 2-2-1 2-2-2 2-Piece Type Rod Ends F.. F..T M.. M..T 0.19-1 inch Steel Steel 28 28 29 29 Rod Ends 2-2-3. SF..T 0.19-1 inch 30 2-2-4 SM..T 31 3-1 KMX.. 0.19-1 in ch 32 3-2-1 Injection M oulded Rod Ends MPF.. 33 Nylon 0.19-1 inch 3-2-1 MPM.. 34-5 -
Type Itme No. Description Name Inner Diameter Range Sliding ontact Surface Page 4-1 AM.. 35 Rod End with Stud Rod Ends with Stud 0.19-1 inch Bronze 4-2 AF.. 36 5-1 GK DO 15-120 mm Steel 37 With GE..ES (-2RS) 5-2 GF DO 20-110 mm Steel 38 5-3 With GEEW.. (-2RS) GN LO 10-80 mm Steel 39 Hydraulic Rod Ends 5-4-1 With GE..ES (-2RS) GIHR DO 20-120 mm Steel 40 5-4-2 With GE..ES (-2RS) GIHR-K DO 20-120 mm Steel 41 5-4-3 With GEEW.. (-2RS) GIHN-K DO 12-200 mm Steel 42 5-4-4 With GE..ES (-2RS) GIHO-K DO 12-100 mm Steel 43-6 -
Type Itme No. Description Name Inner Diameter Range Sliding ontact Surface Page Hydraulic Rod Ends 5-4-5 With GE..ES (-2RS) GAS 25-160 mm Steel 44-7 -
GE E GE ES GE ES-2RS Outer ring 1-1-1 Spherical Plain s(normal series) heat treated,phosphate-treated heat treated,phosphate-treated Dimension Load Ratings d D B r1 r2 a Dynamic Stati Kg GE5E 5 14 6 4 0.3 0.3 13 3.4 17 0.005 GE6E 6 14 6 4 0.3 0.3 13 3.4 17 0.004 GE8E 8 16 8 5 0.3 0.3 15 5.5 27 0.008 GE10E 10 19 9 6 0.3 0.3 12 801 40 0.011 GE12E 12 22 10 7 0.3 0.3 11 10 53 0.015 GE15ES GE15ES-2RS 15 26 12 9 0.3 0.3 8 16 84 0.027 GE17ES GE17ES-2RS 17 30 14 10 0.3 0.3 10 21 106 0.041 GE20ES GE20ES-2RS 20 35 16 12 0.3 0.3 9 30 146 0.066 GE25ES GE25ES-2RS 25 42 20 16 0.6 0.6 7 48 240 0.119 GE30ES GE30ES-2RS 30 47 22 18 0.6 0.6 6 62 310 0.153 GE35ES GE35ES-2RS 35 55 25 20 0.6 1 6 79 399 0.233 GE40ES GE40ES-2RS 40 62 28 22 0.6 1 7 99 495 0.306 GE45ES GE45ES-2RS 45 68 32 25 0.6 1 7 127 637 0.427 GE50ES GE50ES-2RS 50 75 35 28 0.6 1 6 156 780 0.546 GE55ES GE55ES-2RS 55 85 40 32 0.6 1 7 200 1000 0.939 GE60ES GE60ES-2RS 60 90 44 36 1 1 6 245 1220 1.04 GE70ES GE70ES-2RS 70 105 49 40 1 1 6 313 1560 1.55 GE80ES GE80ES-2RS 80 120 55 45 1 1 6 400 2000 2.31 GE90ES GE90ES-2RS 90 130 60 50 1 1 5 488 2440 2.75 GE100ES GE100ES-2RS 100 150 70 55 1 1 7 607 3030 4.45 GE110ES GE110ES-2RS 110 160 70 55 1 1 6 654 3270 4.82 GE120ES GE120ES-2RS 120 180 85 70 1 1 6 950 4750 8.05 GE140ES GE140ES-2RS 140 210 90 70 1 1 7 1070 5350 11.02 GE160ES GE160ES-2RS 160 230 105 80 1 1 8 1360 6800 14.01 GE180ES GE180ES-2RS 180 260 105 80 1.1 1.1 6 1530 7650 18.65 GE200ES GE200ES-2RS 200 290 130 100 1.1 1.1 7 2120 10600 28.03 GE220ES GE220ES-2RS 220 320 135 100 1.1 1.1 8 2320 11600 35.51 GE240ES GE240ES-2RS 240 340 140 100 1.1 1.1 8 2550 12700 39.91 GE260ES GE260ES-2RS 260 370 150 110 1.1 1.1 7 3030 15190 51.54 GE280ES GE280ES-2RS 280 400 155 120 1.1 1.1 6 3570 17850 65.06 GE300ES GE300ES-2RS 300 430 165 120 1.1 1.1 7 3800 19100 78.07-8 -
1-1-2 Spherical Plain s(medium series) GEG E GEG ES GEG ES-2RS Outer ring heat treated,phosphate-treated heat treated,phosphate-treated Dimension Load Ratings d D B r1 r2 a Dynamic Stati Kg GEG5E 5 16 9 5 0.3 0.3 21 5.5 27 0.008 GEG6E 6 16 9 5 0.3 0.3 21 5.5 27 0.006 GEG8E 8 19 11 6 0.3 0.3 21 8.1 40 0.014 GEG10E 10 22 12 7 0.3 0.3 18 10 53 0.021 GEG12E 12 26 15 9 0.3 0.3 18 16 84 0.003 GEG15ES GEG15ES-2RS 15 30 16 10 0.3 0.3 16 21 106 0.049 GEG17ES GEG17ES-2RS 17 35 20 12 0.3 0.3 19 30 146 0.083 GEG20ES GEG20ES-2RS 20 42 25 16 0.3 0.6 17 48 240 0.153 GEG25ES GEG25ES-2RS 25 47 28 18 0.6 0.6 17 62 310 0.203 GEG30ES GEG30ES-2RS 30 55 32 20 0.6 1 17 79 399 0.304 GEG35ES GEG35ES-2RS 35 62 35 22 0.6 1 16 99 495 0.408 GEG40ES GEG40ES-2RS 40 68 40 25 0.6 1 17 127 637 0.542 GEG45ES GEG45ES-2RS 45 75 43 28 0.6 1 15 156 780 0.713 GEG50ES GEG50ES-2RS 50 90 56 36 0.6 1 17 245 1220 1.14 GEG60ES GEG60ES-2RS 60 105 63 40 1 1 17 313 1560 2.05 GEG70ES GEG70ES-2RS 70 120 70 45 1 1 16 400 2000 3.01 GEG80ES GEG80ES-2RS 80 130 75 50 1 1 14 488 2440 3.64 GEG90ES GEG90ES-2RS 90 150 85 55 1 1 15 607 3030 5.22 GEG100ES GEG100ES-2RS 100 160 85 55 1 1 14 654 3270 6.05 GEG110ES GEG110ES-2RS 110 180 100 70 1 1 12 950 4750 9.68 GEG120ES GEG120ES-2RS 120 210 115 70 1 1 16 1070 5350 14.01 GEG140ES GEG140ES-2RS 140 230 130 80 1 1 16 1360 6800 19.01 GEG160ES GEG160ES-2RS 160 260 135 80 1 1 16 1530 7650 20.02 GEG180ES GEG180ES-2RS 180 290 155 100 1.1 1.1 14 2120 10600 32.21 GEG200ES GEG200ES-2RS 200 320 165 100 1.1 1.1 15 2320 11600 45.28 GEG220ES GEG220ES-2RS 220 340 175 100 1.1 1.1 16 2550 12700 51.12 GEG240ES GEG240ES-2RS 240 370 190 110 1.1 1.1 15 3030 15190 65.12 GEG260ES GEG260ES-2RS 260 400 205 120 1.1 1.1 15 3570 17850 82.44 GEG280ES GEG280ES-2RS 280 430 210 120 1.1 1.1 15 3800 19100 97.21-9 -
1-1-3 Spherical Plain s(inch series) GEZ ES GEZ ES-2RS Outer ring heat treated,phosphate-treated heat treated,phosphate-treated Dimension Load Ratings d D B r1 r2 a Dynamic Stati Kg GEZ12ES 12.7 22.2 11.1 9.53 0.15 0.6 6 13 41 0.022 GEZ15ES 15.9 27 13.9 11.9 0.15 0.6 6 22 65 0.036 GEZ19ES GEZ19ES-2RS 19.1 31.8 16.7 14.3 0.3 0.6 6 31 95 0.053 GEZ22ES GEZ22ES-2RS 22.2 36.5 19.4 16.7 0.3 0.6 6 42 127 0.085 GEZ25ES GEZ25ES-2RS 25.4 41.3 22.2 19.1 0.3 0.6 6 56 166 0.121 GEZ31ES GEZ31ES-2RS 31.8 50.8 27.8 23.8 0.6 0.6 6 86 260 0.23 GEZ34ES GEZ34ES-2RS 34.9 55.6 30.2 26.2 0.6 1 6 102 310 0.35 GEZ38ES GEZ38ES-2RS 38.1 61.9 33.3 28.6 0.6 1 6 125 375 0.42 GEZ44ES GEZ44ES-2RS 44.5 71.4 38.9 33.3 0.6 1 6 170 510 0.64 GEZ50ES GEZ50ES-2RS 50.8 81 44.5 38.1 0.6 1 6 224 670 0.93 GEZ57ES GEZ57ES-2RS 57.2 90.5 50 42.9 0.6 1 6 280 850 1.3 GEZ63ES GEZ63ES-2RS 63.5 100 55.6 47.6 1 1 6 355 1060 1.85 GEZ69ES GEZ69ES-2RS 69.9 111 61.1 52.4 1 1 6 415 1250 2.4 GEZ76ES GEZ76ES-2RS 76.2 121 66.7 57.2 1 1 6 500 1500 3.1 GEZ82ES GEZ82ES-2RS 82.6 130 72.2 61.9 1 1 6 585 1760 3.8 GEZ88ES GEZ88ES-2RS 88.9 140 77.8 66.7 1 1 6 680 2040 4.8 GEZ95ES GEZ95ES-2RS 95.3 149 83.3 71.4 1 1 6 780 2360 5.8 GEZ101ES GEZ101ES-2RS 102 159 88.9 76.2 1 1 6 900 2650 7 GEZ107ES GEZ107ES-2RS 108 168 94.5 81 1 1 6 1000 3000 8.41 GEZ114ES GEZ114ES-2RS 114 178 100 85.7 1 1 6 1120 3400 9.8 GEZ120ES GEZ120ES-2RS 121 187 106 90.5 1 1 6 1250 3750 11.5 GEZ127ES GEZ127ES-2RS 127 197 111 95.3 1 1 6 1400 4150 13.5 GEZ152ES GEZ152ES-2RS 152 222 121 105 1 1 5 1730 5200 17.5-10 -
1-1-4 Spherical Plain s(with wide inner ring and fitting) GEEW ES Outer ring heat treated,phosphate-treated heat treated,phosphate-treated Dimension Load Ratings d D B r1 r2 a Dynamic Stati Kg GEEW12ES 12 22 12 7 0.3 0.3 4 10 53 0.022 GEEW15ES 15 26 15 9 0.3 0.3 5 16 84 0.031 GEEW16ES 16 28 16 9 0.3 0.3 4 17 85 0.035 GEEW17ES 17 30 17 10 0.3 0.3 7 21 106 0.044 GEEW20ES 20 35 20 12 0.3 0.3 4 30 146 0.071 GEEW25ES 25 42 25 16 0.6 0.6 4 48 240 0.131 GEEW30ES 30 47 30 18 0.6 0.6 4 62 310 0.168 GEEW32ES 32 52 32 18 0.6 1 4 65 328 0.182 GEEW35ES 35 55 35 20 0.6 1 4 79 399 0.253 GEEW40ES 40 62 40 22 0.6 1 4 99 495 0.338 GEEW45ES 45 68 45 25 0.6 1 4 127 637 0.481 GEEW50ES 50 75 50 28 0.6 1 4 156 780 0.558 GEEW60ES 60 90 60 36 1 1 4 245 1220 1.15 GEEW63ES 63 95 63 36 1 1 4 253 1260 1.25 GEEW70ES 70 105 70 40 1 1 4 313 1560 1.71 GEEW80ES 80 120 80 45 1 1 4 400 2000 2.39 GEEW90ES 90 130 90 50 1 1 4 488 2440 3.21 GEEW100ES 100 150 100 55 1 1 4 607 3030 4.79 GEEW110ES 110 160 110 55 1 1 4 654 3270 5.78 GEEW125ES 125 180 125 70 1 1 4 950 4750 8.49 GEEW160ES 160 230 160 80 1 1 4 1360 6800 16.5 GEEW200ES 200 290 200 100 1.1 1.1 4 2120 10600 32.1 GEEW250ES 250 400 250 120 1.1 1.1 4 3750 17800 99.1 GEEW320ES 320 520 320 160 1.1 1.1 4 6200 30500 225-11 -
1-2-1 Spherical Plain s(inch series) OM OM T Outer ring Liner heat treated,hard chrome plated or mid-carbon steel,or altermative materials avaulable,add T as suffix Dimension(inch) Static Radial d D B r a Load (lbs) (lbs) OM3 OM3T 0.19 0.5625 0.281 0.218 0.015 11 3250 0.014 OM4 OM4T 0.25 0.6562 0.343 0.25 0.022 13.5 4950 0.002 OM5 OM5T 0.3125 0.75 0.375 0.281 0.032 12 6475 0.03 OM6 OM6T 0.375 0.8125 0.406 0.312 0.032 10 8400 0.038 OM7 OM7T 0.4375 0.9062 0.437 0.343 0.032 8 9453 0.047 OM8 OM8T 0.5 1 0.5 0.39 0.032 9.5 13250 0.065 OM9 OM9T 0.5625 1.0937 0.562 0.437 0.032 9.5 16630 0.086 OM10 OM10T 0.625 1.1875 0.625 0.5 0.032 8.5 21280 0.11 OM12 OM12T 0.75 1.4375 0.75 0.593 0.044 9 31920 0.204 OM14 OM14T 0.875 1.5625 0.875 0.703 0.044 9.5 41960 0.263 OM16 OM16T 1 1.75 1 0.797 0.044 10 55200 0.386 Dimension(mm) d D B r a Static Radial Load (lbs) (lbs) OM3 OM3T 4.83 14.29 7.14 5.54 0.381 11 3250 0.014 OM4 OM4T 6.35 16.67 8.71 6.35 0.56 13.5 4950 0.002 OM5 OM5T 7.94 19.05 9.53 7.14 0.812 12 6475 0.03 OM6 OM6T 9.53 204 10.31 7.92 0.812 10 8400 0.038 OM7 OM7T 11.11 22.93 11.1 8.71 0.812 8 9453 0.047 OM8 OM8T 12.7 25.4 12.7 9.91 0.812 9.5 13250 0.065 OM9 OM9T 14.29 27.78 14.27 11.1 0.812 9.5 16630 0.086 OM10 OM10T 15.88 30.16 15.88 12.7 0.812 8.5 21280 0.11 OM12 OM12T 19.05 36.51 19.05 15.06 1.12 9 31920 0.204 OM14 OM14T 22.23 39.69 22.23 17.86 1.12 9.5 41960 0.263 OM16 OM16T 25.4 44.45 25.4 20.24 1.12 10 55200 0.386-12 -
1-2-2 pherical Plain s(maintenance-free) GE GEG Outer ring Liner heat treated,hard chromd plated or mid-carbon steel, or altermative materials avaulable Dimension Load Ratings d D B r1 r2 a Dynamic Stati Kg GE4 4 12 5 3 0.3 0.3 16 2.1 5.4 0.003 GE5 5 14 6 4 0.3 0.3 13 3.6 9.1 0.004 GE6 6 14 6 4 0.3 0.3 13 3.6 9.1 0.004 GE8 8 16 8 5 0.3 0.3 15 5.8 14 0.008 GE10 10 19 9 6 0.3 0.3 12 8.6 21 0.011 GE12 12 22 10 7 0.3 0.3 11 11 28 0.015 GE15 15 26 12 9 0.3 0.3 8 18 45 0.027 GE17 17 30 14 10 0.3 0.3 10 22 56 0.041 GE20 20 35 16 12 0.3 0.3 9 31 78 0.066 GE25 25 42 20 16 0.6 0.6 7 51 127 0.119 GE30 30 47 22 18 0.6 0.6 6 65 166 0.153 GEG5 5 16 9 5 0.3 0.3 21 5.8 14 0.007 GEG6 6 16 9 5 0.3 0.3 21 5.8 14 0.008 GEG8 8 19 11 6 0.3 0.3 21 8.6 21 0.014 GEG10 10 22 12 7 0.3 0.3 18 11 28 0.021 GEG12 12 26 15 9 0.3 0.3 18 18 45 0.033 GEG15 15 30 16 10 0.3 0.3 16 22 56 0.049 GEG17 17 35 20 12 0.3 0.3 19 31 78 0.083 GEG20 20 42 25 16 0.3 0.6 17 51 127 0.153 GEG25 25 47 28 18 0.6 0.6 17 65 166 0.203 GEG30 30 55 32 20 0.6 1 17 83 212 0.304-13 -
1-2-3 Spherical Plain s (Inch series and with wide inner ring and fitting) GHM..T Outer ring Liner heat treated,hard chrome plated or mid-carbon steel,or altermative materials avaulable Dimension(inch) d D B r a Static Radial Load (lbs) (lbs) GHM4T 0.25 0.74 0.593 0.255 0.022 24 7.56 0.036 GHM5T 0.3125 0.906 0.813 0.345 0.032 23 16.975 0.078 GHM6T 0.375 0.906 0.813 0.345 0.032 23 16.975 0.070 GHM7T 0.4375 1 0.875 0.345 0.032 22 19.018 0.091 GHM8T 0.5 1.125 0.937 0.401 0.032 20 25.263 0.132 GHM10T 0.625 1.375 1.2 0.567 0.032 20 44.651 0.254 GHM12T 0.75 1.5625 1.28 0.62 0.044 18 53.707 0.332 GHM14T 0.875 1.75 1.4 0.63 0.044 18 72.424 0.436 Dimension(mm) d D B r a Static Radial Load (lbs) (lbs) GHM4T 6.35 18.796 15.06 6.48 0.56 24 7.56 0.036 GHM5T 7.94 23.012 20.65 8.76 0.812 23 16.975 0.078 GHM6T 9.53 23.012 20.65 8.76 0.812 23 16.975 0.070 GHM7T 11.11 25.4 22.23 8.76 0.812 22 19.018 0.091 GHM8T 12.7 28.575 23.8 10.19 0.812 20 25.263 0.132 GHM10T 15.88 34.925 30.48 14.4 0.812 20 44.651 0.254 GHM12T 19.05 39.688 32.51 15.75 1.12 18 53.707 0.332 GHM14T 22.23 44.45 35.56 16 1.12 18 72.424 0.436-14 -
1-3 pherical Plain s(insert Type) GEBK..S Outer ring Race heat treated,hard chromd plated or mid-carbon steel, or altermative materials avaulable opper alloy Dimension Load Ratings d D B r1 r2 a Dynamic Stati Kg GEBK5S 5 16 8 6 0.3 0.3 13 330 800 0.009 GEBK6S 6 18 9 6.75 0.3 0.3 13 430 1030 0.013 GEBK8S 8 22 12 9 0.3 0.3 13 710 1710 0.024 GEBK10S 10 26 14 10.5 0.3 0.3 13 1000 2400 0.039 GEBK12S 12 30 16 12 0.3 0.3 13 1330 3200 0.058 GEBK14S 14 34 19 13.5 0.3 0.3 13 1710 4110 0.084 GEBK16S 16 38 21 15 0.3 0.3 13 2140 5140 0.111 GEBK18S 18 42 23 16.5 0.3 0.3 13 2620 6290 0.16 GEBK20S 20 46 25 18 0.3 0.3 13 3140 7540 0.21 GEBK22S 22 50 28 20 0.6 0.6 13 3810 9140 0.265 GEBK25S 25 56 31 22 0.6 0.6 13 4710 11300 0.39 GEBK28S 28 62 35 25 0.6 0.6 13 5950 14300 0.41 GEBK30S 30 66 37 25 0.6 0.6 13 6350 15200 0.61-15 -
2-1-1-1 Spherical Rod End (Maintenance-Free Type,Female) SI..T/K W H D B 2α Outer ring heat treated,hard chromd plated opper alloy A E Only left hand thread Line heat treated,nickle or zinc plated J Thread K F B Thread D H W A E F J K α Dyn Stat o g SI5T/K 5 M5 0.8 18 6 8 27 10 9 4.5 9 11 4 4 7.5 18 SI6T/K 6 M6 1 20 6.75 9 30 12 10 5 11 13 9 4.4 9.3 27 SI8T/K 8 M8 1.25 24 9 12 36 16 12.5 5 14 16 13 8 16.7 46 SI10T/K 10 M10 1.5 28 10.5 14 43 20 15 6.5 17 19 13 12.9 23.4 76 SI12T/K 12 M12 1.75 32 12 16 50 22 17.5 6.5 19 22 13 17 32 115 SI14T/K 14 M14 2 36 13.5 19 57 25 20 8 22 25 13 24 41.9 170 SI16T/K 16 M16 2 42 15 21 64 28 22 8 22 27 13 28.5 52.7 230 SI18T/K 18 M18 1.5 46 16.5 23 71 32 25 10 27 31 13 35 63.8 320 SI20T/K 20 M20 1.5 50 18 25 77 33 25 10 30 34 13 40 78.1 415 SI22T/K 22 M22 1.5 54 20 28 84 37 30 10 32 37 13 52 97.2 540 SI25T/K 25 M24 2 60 22 31 94 42 33.5 12 36 42 13 60 122.1 750 SI30T/K 30 M30 2 70 25 37 110 51 40 15 41 51 13 81 168.4 1130 SI35T/K 35 M36 2 80 28 43 125 56 49 20 50 58 13 100 205.7 1600-16 -
2-1-1-2 Spherical Rod End (Maintenance-Free Type, Male) SA..T/K D W H 2α B heat treated,hard chromd plated A Outer ring Line opper alloy Thread heat treated,nickle or zinc plated B Thread D H W A α Dyn Stat o g SA5T/K 5 M5 0.8 18 6 8 33 19 4 4 7.5 13 SA6T/K 6 M6 1 20 6.75 9 36 22 9 4.4 9.3 20 SA8T/K 8 M8 1.25 24 9 12 42 25 13 8 16.7 33 SA10T/K 10 M10 1.5 28 10.5 14 48 29 13 12.9 23.4 56 SA12T/K 12 M12 1.75 32 12 16 54 33 13 17 32 87 SA14T/K 14 M14 2 36 13.5 19 60 38 13 24 41.9 129 SA16T/K 16 M16 2 42 15 21 66 40 13 28.5 52.7 189 SA18T/K 18 M18 1.5 46 16.5 23 72 44 13 35 63.8 267 SA20T/K 20 M20 1.5 50 18 25 78 47 13 40 78.1 348 SA22T/K 22 M22 1.5 54 20 28 84 51 13 52 97.2 443 SA25T/K 25 M24 2 60 22 31 94 58 13 60 122.1 600 SA30T/K 30 M30 2 70 25 37 110 71 13 81 168.4 1030 SA35T/K 35 M36 2 80 28 43 125 77 13 100 205.7 1600-17 -
2-1-2-1 Lubricant type Rod Ends PHS W H D Race Material heat treated,hard chromd plated opper alloy heat treated,nickle or zinc plated B J 2α Thread A E K F Lub Fitting Optional Only left hand thread B Thread D H W A E F J K α Dyn Stat o g PHS5 5 M5 18 6 8 27 10 9 4 9 11 13 2.5 9.9 16 PHS6 6 M6 20 6.75 9 30 12 10 5 11 13 13 3.2 11.9 22 PHS8 8 M8 24 9 12 36 16 12.5 5 14 16 14 5.4 17.1 47 PHS10 10 M10 28 10.5 14 43 20 15 6.5 17 19 13 7.5 21.4 77 PHS12 12 M12 32 12 16 50 22 17.5 6.5 19 22 13 10.0 27.1 100 PHS14 14 M14 36 13.5 19 57 25 20 8 22 26 16 12.9 24.5 160 PHS16 16 M16 42 15 21 64 28 22 8 22 28 15 16.1 37.1 220 PHS18 18 M18 1.5 46 16.5 23 71 32 25 10 27 31 15 19.6 43.1 320 PHS20 20 M20 1.5 50 18 25 77 33 27.5 10 30 35 14 23.6 49.5 420 PHS22 22 M22 1.5 54 20 28 84 37 30 12 32 38 15 28.6 57.3 540 PHS25 25 M24 2 60 22 31 94 42 33.5 12 36 42 15 35.4 67.8 730 PHS30 30 M27 2 70 25 37 110 51 40 15 41 50 17 52.6 88.0 1100-18 -
2-1-2-2 Lubricant type Rod Ends POS D W H B 2α Inner ring Race Material heat treated,hard chromd plated opper alloy heat treated,nickle or zinc plated A Lub Fitting Optional Thread B Thread D H W A α Dyn Stat o g POS5 5 M5 18 6 8 33 19 13 2.5 9.9 13 POS6 6 M6 20 6.75 9 36 21 13 3.2 11.9 20 POS8 8 M8 24 9 12 42 25 14 5.4 17.1 38 POS10 10 M10 28 10.5 14 48 28 13 7.5 21.4 55 POS12 12 M12 32 12 16 54 32 13 10.0 27.1 85 POS14 14 M14 36 13.5 19 60 36 16 12.9 24.5 140 POS16 16 M16 42 15 21 66 37 15 16.1 37.1 210 POS18 18 M18 1.5 46 16.5 23 72 41 15 19.6 43.1 280 POS20 20 M20 1.5 50 18 25 78 45 14 23.6 49.5 380 POS22 22 M22 1.5 54 20 28 84 48 15 28.6 57.3 480 POS25 25 M24 2 60 22 31 94 55 15 35.4 67.8 640 POS30 30 M27 2 70 25 37 110 66 17 52.6 88.0 1100-19 -
2-1-3-1 Lubricant type Rod Ends PHSB D W H B 2α Race Material heat treated,hard chromd plated opper alloy heat treated,nickle or zinc plated A K Lub. Fitting Optional Thread J B Thread D H W A J K α Dyn Stat o g PHSB3 PHSB4 PHSB5 PHSB6 PHSB7 PHSB8 PHSB10 PHSB12 PHSB16 0.1900 0.625 0.250 0.312 1.062 0.562 0.312 0.406 10-32 4.826 15.87 6.35 7.925 26.97 14.27 7.92 10.31 0.2500 0.750 0.281 0.375 1.312 0.750 0.375 0.469 1/4-28 6.35 19.05 7.137 9.525 33.32 19.05 9.52 11.91 0.3125 0.875 0.344 0.437 1.375 0.750 0.437 0.500 5/16-24 7.938 22.22 8.738 11.1 34.92 19.05 11.1 12.7 0.3750 1.000 0.406 0.500 1.625 0.937 0.562 0.687 3/8-24 9.525 25.4 10.31 12.7 41.27 23.8 14.27 17.45 0.4375 1.125 0.437 0.562 1.812 1.062 0.625 0.750 7/16-20 11.112 28.57 11.1 14.27 46.02 26.97 15.87 19.05 0.5000 1.312 0.500 0.625 2.125 1.187 0.750 0.875 1/2-20 12.7 33.32 12.7 15.87 53.97 31.05 19.05 22.22 0.6250 1.500 0.562 0.750 2.500 1.500 0.875 1.000 5/8-18 15.875 38.1 14.27 19.05 63.5 38.1 22.22 25.4 0.7500 1.750 0.687 0.875 2.875 1.750 1.000 1.125 3/4-16 19.05 44.45 17.45 22.22 73.02 44.45 25.4 28.57 1.0000 2.750 1.000 1.375 4.125 2.125 1.500 1.625 1 1/4-12 25.4 69.85 25.4 34.92 104.77 53.98 38.1 41.27 10 3.43 9.31 15 13 4.60 13.52 25 10 6.76 16.85 36 9.5 9.21 22.14 61 11 11.27 26.75 81 9 14.79 37.24 133 11 19.99 40.18 190 10 28.51 56.44 285 14 59.29 86.73 1000-20 -
2-1-3-2 Lubricant type Rod Ends POSB D W H B 2α Inner ring Race Material heat treated,hard chromd plated opper alloy heat treated,nickle or zinc plated A Lub Fitting Optional Thread B Thread D H W A α Dyn Stat 0 (g) POSB3 POSB4 POSB5 POSB6 POSB7 POSB8 POSB10 POSB12 POSB16 0.1900 0.625 0.250 0.312 1.250 0.750 10-32 4.826 15.87 6.35 7.925 31.75 19.05 0.2500 0.750 0.281 0.375 1.562 1.000 1/4-28 6.35 19.05 7.137 9.525 39.67 25.4 0.3125 0.875 0.344 0.437 1.875 1.250 5/16-24 7.938 22.22 8.738 11.1 47.62 31.75 0.3750 1.000 0.406 0.500 1.938 1.250 3/8-24 9.525 25.4 10.31 12.7 49.22 31.75 0.4375 1.125 0.437 0.562 2.125 1.375 7/16-20 11.112 28.57 11.1 14.27 53.97 34.92 0.5000 1.312 0.500 0.625 2.438 1.500 1/2-20 12.7 33.32 12.7 15.87 61.92 38.1 0.6250 1.500 0.562 0.750 2.625 1.625 5/8-18 15.875 38.1 14.27 19.05 66.67 41.27 0.7500 1.750 0.687 0.875 2.875 1.750 3/4-16 19.05 44.45 17.45 22.22 73.02 44.45 1.0000 2.750 1.000 1.375 4.125 2.125 1 1/4-12 25.4 69.85 25.4 34.92 104.77 53.97 10 3.43 9.31 12.5 13 4.60 13.52 22 10 6.76 16.85 37 9.5 9.21 22.14 55 11 11.27 26.75 78 9 14.79 37.24 120 11 19.99 40.18 184 10 28.51 56.44 293 14 59.29 86.73 1100-21 -
2-1-4-1 Spherical Rod End (Maintenance-Free Type,Female) SI.. W H D B 2α Outer ring heat treated,hard chromd plated opper alloy A E Only left hand thread Line heat treated,nickle or zinc plated J Thread K F B Thread D H W A E F J K α Dyn Stat o g SI5 5 M5 0.8 21 4.5 6 30 11 10 5 10 13 13 3.60 9.10 16 SI6 6 M6 1 21 4.5 6 30 11 11 5 11 13 13 3.60 8.15 21 SI8 8 M8 1.25 24 6.5 8 36 15 13 5 13 16 15 5.85 12.9 39 SI10 10 M10 1.5 29 7.5 9 43 15 16 5.5 17 19 12 8.65 17.6 61 SI12 12 M12 1.75 34 8.5 10 50 18 19 7 19 22 10 11.40 24.5 96 SI15 15 M14 2 40 10.5 12 61 21 22 8 22 26 8 17.60 36.0 180 SI17 17 M16 2 46 11.5 14 67 24 25 10 22 29 10 22.40 45.0 220 SI20 20 M20 1.5 53 13.5 16 77 30 28 10 32 34 9 31.50 60.0 350 SI25 25 M24 2 64 18 20 94 36 35 12 36 42 7 51.00 83.0 640 SI30 30 M30 2 73 20 22 110 45 42 15 41 50 6 66.50 110 930 SI35 35 M36 2 82 22 25 125 60 48 15 50 58 4 75 184 1520-22 -
2-1-4-2 Spherical Rod End (Maintenance-Free Type, Male) SA.. D W H 2α B heat treated,hard chromd plated A Outer ring Line opper alloy Thread heat treated,nickle or zinc plated B Thread D H W A α Dyn Stat o g SA5 5 M5 0.8 21 4.5 6 36 18 13 3.60 9.1 11 SA6 6 M6 1 21 4.5 6 36 18 13 3.60 8.15 16 SA8 8 M8 1.25 24 6.5 8 42 22 15 5.85 12.9 28 SA10 10 M10 1.5 29 7.5 9 48 26 12 8.65 17.6 50 SA12 12 M12 1.75 34 8.5 10 54 28 10 11.40 24.5 86 SA15 15 M14 2 40 10.5 12 63 34 8 17.60 36.0 140 SA17 17 M16 2 46 11.5 14 69 36 10 22.40 45.0 190 SA20 20 M20 1.5 53 13.5 16 78 43 9 31.50 60.0 320 SA25 25 M24 2 64 18 20 94 53 7 51.00 83.0 560 SA30 30 M30 2 73 20 22 110 65 6 66.50 110 890 SA35 35 M36 2 82 22 25 140 82 4 75 184 1410-23 -
2-1-5-1 Spherical Rod End (Maintenance-Free Type,Female) SI..ES W H D heat treated,phosphate-treated B 2α A E Only left hand thread Outer ring heat treated,phosphate-treated heat treated,nickle or zinc plated J Thread K F B Thread D H W A E F J K α Dyn Stat o g SI5ES 5 M5 0.8 21 4.5 6 30 11 10 5 10 13 13 3.4 17 16 SI6ES 6 M6 1 21 4.5 6 30 11 11 5 11 13 13 3.4 17 21 SI8ES 8 M8 1.25 24 6.5 8 36 15 13 5 13 16 15 5.5 27.6 39 SI10ES 10 M10 1.5 29 7.5 9 43 15 16 5.5 17 19 12 8.1 40.8 61 SI12ES 12 M12 1.75 34 8.5 10 50 18 19 7 19 22 10 10.7 53.5 96 SI15ES 15 M14 2 40 10.5 12 61 21 22 8 22 26 8 16.8 84.1 180 SI17ES 17 M16 2 46 11.5 14 67 24 25 10 22 29 10 21.2 106 220 SI20ES 20 M20 1.5 53 13.5 16 77 30 28 10 32 34 9 29.5 148 350 SI25ES 25 M24 2 64 18 20 94 36 35 12 36 42 7 48.2 241 640 SI30ES 30 M30 2 73 20 22 110 45 42 15 41 50 6 62.2 311 930 SI35ES 35 M36 3 82 22 25 125 60 48 15 50 58 4 79.9 399 1520 SI40ES 40 M39 3 92 24 28 142 65 52 18 60 65 13 99 495 2060 SI45ES 45 M42 3 102 28 32 145 65 58 20 65 70 13 127.5 637.5 2720 SI50ES 50 M45 3 112 31 35 160 68 62 20 70 75 13 157 785.4 3570 SI60ES 60 M52 3 135 39 44 170 70 70 20 80 88 13 244.8 1224 5630-24 -
2-1-5-2 Spherical Rod End (Maintenance-Free Type, Male) SA..ES W H D heat treated,phosphate-treated 2α B Outer ring heat treated,phosphate-treated heat treated,nickle or zinc plated Thread A B Thread D H W A α Dyn Stat o g SA5ES 5 M5 0.8 21 4.5 6 36 18 13 3.4 17 11 SA6ES 6 M6 1 21 4.5 6 36 18 13 3.4 17 16 SA8ES 8 M8 1.25 24 6.5 8 42 22 15 5.5 27.6 28 SA10ES 10 M10 1.5 29 7.5 9 48 26 12 8.1 40.8 50 SA12ES 12 M12 1.75 34 8.5 10 54 28 10 10.7 53.5 86 SA15ES 15 M14 2 40 10.5 12 63 34 8 16.8 84.1 140 SA17ES 17 M16 2 46 11.5 14 69 36 10 21.2 106 190 SA20ES 20 M20 1.5 53 13.5 16 78 43 9 29.5 148 320 SA25ES 25 M24 2 64 18 20 94 53 7 48.2 241 560 SA30ES 30 M30 2 73 20 22 110 65 6 62.2 311 890 SA35ES 35 M36 3 82 22 25 140 82 4 79.9 399 1410 SA40ES 40 M39 3 92 24 28 150 86 13 99 495 1860 SA45ES 45 M42 3 102 28 32 163 92 13 127.5 637.5 2570 SA50ES 50 M45 3 112 31 35 185 104 13 157 785.4 3580 SA60ES 60 M52 3 135 39 44 210 115 13 244.8 1224 5730-25 -
2-2-1 Two piece Type Rod End W H D F.. F..T B 2α liner heat treated, hard chromd plated heat treated,nickle or zinc plated Thread E Only Left Hand F A Lub Fitting Optional B Thread D H W A E F α F3 0.1900 10-32 0.625 0.234 0.312 1.062 0.500 0.312 0.406 10 2079 0.04 F4 0.2500 1/4-28 0.750 0.250 0.375 1.312 0.687 0.375 0.469 13.5 3208 0.05 F5 0.3125 5/16-24 0.875 0.312 0.437 1.375 0.687 0.437 0.500 11 3824 0.08 F6 0.3750 3/8-24 1.000 0.359 0.500 1.625 0.812 0.562 0.687 11 5087 0.13 F7 0.4375 7/16-20 1.125 0.406 0.562 1.812 0.937 0.625 0.750 10.5 6385 0.18 F8 0.5000 1/2-20 1.312 0.453 0.625 2.125 1.062 0.750 0.875 10 9096 0.29 F10 0.6250 5/8-18 1.500 0.484 0.750 2.500 1.375 0.875 1.000 13 9713 0.43 F12 0.7500 3/4-16 1.750 0.593 0.875 2.875 1.562 1.000 1.125 12 14207 0.65 Stat o lbs lbs F3T 0.1900 10-32 0.625 0.234 0.312 1.062 0.500 0.312 0.406 10 2079 0.04 F4T 0.2500 1/4-28 0.750 0.250 0.375 1.312 0.687 0.375 0.469 13.5 3208 0.05 F5T 0.3125 5/16-24 0.875 0.312 0.437 1.375 0.687 0.437 0.500 11 3824 0.08 F6T 0.3750 3/8-24 1.000 0.359 0.500 1.625 0.812 0.562 0.687 11 5087 0.13 F7T 0.4375 7/16-20 1.125 0.406 0.562 1.812 0.937 0.625 0.750 10.5 6385 0.18 F8T 0.5000 1/2-20 1.312 0.453 0.625 2.125 1.062 0.750 0.875 10 9096 0.29 F10T 0.6250 5/8-18 1.500 0.484 0.750 2.500 1.375 0.875 1.000 13 9713 0.43 F12T 0.7500 3/4-16 1.750 0.593 0.875 2.875 1.562 1.000 1.125 12 14207 0.65-26 -
2-2-2 Two piece Type Rod End M.. M..T W H D liner heat treated, hard chromd plated B 2α A heat treated,nickle or zinc plated Thread B Thread D H W A α Stat o lbs lbs M3 0.1900 10-32 0.625 0.234 0.312 1.250 0.750 10 2079 0.03 M4 0.2500 1/4-28 0.750 0.250 0.375 1.562 1.000 13.5 3208 0.04 M5 0.3125 5/16-24 0.875 0.312 0.437 1.875 1.250 11 3824 0.06 M6 0.3750 3/8-24 1.000 0.359 0.500 1.938 1.250 11 5087 0.11 M7 0.4375 7/16-20 1.125 0.406 0.562 2.125 1.375 10.5 6385 0.15 M8 0.5000 1/2-20 1.312 0.453 0.625 2.438 1.500 10 9096 0.24 M10 0.6250 5/8-18 1.500 0.484 0.750 2.625 1.625 13 9713 0.36 M12 0.7500 3/4-16 1.750 0.593 0.875 2.875 1.750 12 14207 0.57 M3T 0.1900 10-32 0.625 0.234 0.312 1.250 0.750 10 2079 0.03 M4T 0.2500 1/4-28 0.750 0.250 0.375 1.562 1.000 13.5 3208 0.04 M5T 0.3125 5/16-24 0.875 0.312 0.437 1.875 1.250 11 3824 0.06 M6T 0.3750 3/8-24 1.000 0.359 0.500 1.938 1.250 11 5087 0.11 M7T 0.4375 7/16-20 1.125 0.406 0.562 2.125 1.375 10.5 6385 0.15 M8T 0.5000 1/2-20 1.312 0.453 0.625 2.438 1.500 10 9096 0.24 M10T 0.6250 5/8-18 1.500 0.484 0.750 2.625 1.625 13 9713 0.36 M12T 0.7500 3/4-16 1.750 0.593 0.875 2.875 1.750 12 14207 0.57-27 -
2-2-3 Two piece Type Rod End W H D SF..T B 2α Stainless steel heat treated Thread A liner Stainless steel Only Left Hand E F B Thread D H W A E F α Stat o lbs lbs SF3T 10-32 0.1900 SFL3T 10-32L SF4T 1/4-28 0.2500 SFL4T 1/4-28L SF5T 5/16-24 0.3125 SFL5T 5/16-24L SF6T 3/8-24 0.3750 SFL6T 3/8-24L SF7T 7/16-20 0.4375 SFL7T 7/16-20L SF8T 1/2-20 0.5000 SFL8T 1/2-20L SF10T 5/8-18 0.6250 SFL10T 5/8-18L SF12T 3/4-16 0.7500 SFL12T 3/4-16L 0.625 0.234 0.312 1.062 0.500 0.312 0.406 10 2079 0.04 0.750 0.250 0.375 1.312 0.687 0.375 0.469 13.5 3208 0.05 0.875 0.312 0.437 1.375 0.687 0.437 0.500 11 3824 0.08 1.000 0.359 0.500 1.625 0.812 0.562 0.687 11 5087 0.13 1.125 0.406 0.562 1.812 0.937 0.625 0.750 10.5 6385 0.18 1.312 0.453 0.625 2.125 1.062 0.750 0.875 10 9096 0.29 1.500 0.484 0.750 2.500 1.375 0.875 1.000 13 9713 0.43 1.750 0.593 0.875 2.875 1.562 1.000 1.125 12 14207 0.65-28 -
2-2-4 Two piece Type Rod End SM..T W H D liner Stainless steel heat treated B B 2α A Stainless steel Thread B Thread D H W A α Stat o lbs lbs SM3T 10-32 0.1900 SML3T 10-32L SM4T 1/4-28 0.2500 SML4T 1/4-28L SM5T 5/16-24 0.3125 SML5T 5/16-24L SM6T 3/8-24 0.3750 SML6T 3/8-24L SM7T 7/16-20 0.4375 SML7T 7/16-20L SM8T 1/2-20 0.5000 SML8T 1/2-20L SM10T 5/8-18 0.6250 SML10T 5/8-18L SM12T 3/4-16 0.7500 SML12T 3/4-16L 0.625 0.234 0.312 1.250 0.750 10 2079 0.03 0.750 0.250 0.375 1.562 1.000 13.5 3208 0.04 0.875 0.312 0.437 1.875 1.250 11 3824 0.06 1.000 0.359 0.500 1.938 1.250 11 5087 0.11 1.125 0.406 0.562 2.125 1.375 10.5 6385 0.15 1.312 0.453 0.625 2.438 1.500 10 9096 0.24 1.500 0.484 0.750 2.625 1.625 13 9713 0.36 1.750 0.593 0.875 2.875 1.750 12 14207 0.57-29 -
3-1 Injection Moulded Rod Ends KMX.. D H B heat treated, hard chromd plated A liner Nylon heat treated, hard chromd plated THREAD KMX8 1/2-20 0.5 KMXL8 1/2-20 LH KMX10-8 5/8-18 0.5 KMXL10-8 5/8-18 LH KMX10 5/8-18 0.625 KMXL10 5/8-18 LH KMX12 3/4-16 0.75 KMXL12 3/4-16 LH KMX12-8 3/4-16 0.5 KMXL12-8 3/4-16 LH KMX12-10 3/4-16 0.625 KMXL12-10 3/4-16 LH B Thread D H W A α 1.312 0.5 0.625 2.438 1.5 9 1.5 0.5 0.625 2.625 1.625 9 1.5 0.562 0.75 2.625 1.625 11 1.75 0.687 0.875 2.875 1.75 10 1.75 0.562 0.75 2.875 1.75 11 1.75 0.562 0.75 2.875 1.75 11 KMX8 1/2-20 12.7 KMXL8 1/2-20 LH KMX10-8 5/8-18 12.7 KMXL10-8 5/8-18 LH KMX10 5/8-18 15.88 KMXL10 5/8-18 LH KMX12 3/4-16 19.05 KMXL12 3/4-16 LH KMX12-8 3/4-16 12.7 KMXL12-8 3/4-16 LH KMX12-10 3/4-16 15.88 KMXL12-10 3/4-16 LH 33.32 12.7 15.875 61.93 38.1 9 38.1 12.7 15.875 66.68 41.28 9 38.1 14.275 19.05 66.68 41.28 11 44.45 17.45 22.225 73.03 44.45 10 44.45 14.275 19.05 73.03 44.45 11 44.45 14.275 19.05 73.03 44.45 11-30 -
3-2-1 Injection Moulded Rod Ends MPF.. J N M liner heat treated, hard chromd plated Nylon G P U H B heat treated, nickle or zinc plated O P Thread B Thread G H J M N O P U MPF4 1/4-28 0.25 MPFL4 1/4-28 LH 1.687 1.312 0.75 0.75 0.281 0.375 0.469 0.375 0.218 MPF5 5/16-24 0.3125 MPFL5 5/16-24 LH MPF6 3/8-24 0.375 MPFL6 3/8-24 LH MPF7 7/16-20 0.4375 MPFL7 7/16-20 LH MPF8 1/2-20 0.5 MPFL8 1/2-20 LH 1.812 1.375 0.75 0.875 0.344 0.437 0.5 0.437 0.218 2.125 1.625 0.937 1.09 0.406 0.5 0.687 0.562 0.218 2.375 1.812 1.031 1.131 0.437 0562 0.75 0.625 0.25 2.781 2.125 1.187 1.38 0.5 0.625 0.875 0.75 0.312 MPF4 6.35 1/4-28 MPFL4 1/4-28 LH MPF5 7.938 5/16-24 MPFL5 5/16-24 LH MPF6 9.525 3/8-24 MPFL6 3/8-24 LH MPF7 11.112 7/16-20 MPFL7 7/16-20 LH MPF8 12.70 1/2-20 MPFL8 1/2-20 LH 42.85 33.325 19.05 19.05 7.01 9.525 11.913 9.525 5.537 46.025 34.925 19.05 22.225 8.738 11.10 12.7 11.10 5.537 53.975 41.275 23.8 27.686 10.312 12.7 17.45 14.275 5.537 60.33 46.02 26.19 28.73 11.1 14.27 19.05 15.88 6.35 71.425 53.975 30.15 34.925 12.598 15.875 22.225 19.05 7.925-31 -
3-2-2 Injection Moulded Rod Ends MPM.. N M B liner heat treated, hard chromd plated Nylon G L Thread heat treated, nickle or zinc plated B Thread G J M N L MPM3 10-32 0.19 0.75 1.25 0.625 0.25 0.312 1.5625 MPML3 10-32 LH MPM4 1/4-28 0.25 MPML4 1/4-28 LH MPM5 5/16-24 0.3125 MPML5 5/16-24 LH MPM6 3/8-24 0.375 MPML6 3/8-24 LH MPM8 1/2-20 0.5 MPML8 1/2-20 LH 1 1.562 0.75 0.279 0.375 1.937 1.25 1.875 0.875 0.344 0.437 2.3125 1.25 2 1.09 0.406 0.5 2.545 1.5 2.437 1.375 0.5 0.625 3.1245 MPM3 10-32 4.826 MPML3 10-32LH MPM4 1/4-28 6.35 MPML4 1/4-28 LH MPM5 5/16-24 7.938 MPML5 5/16-24 LH MPM6 3/8-24 9.525 MPML6 3/8-24 LH MPM8 1/2-20 12.70 MPML8 1/2-20 LH 19.05 31.75 15.88 6.35 7.92 39.69 25.4 39.68 19.05 7.01 9.525 49.2 31.75 47.62 22.22 8.738 11.10 58.74 31.75 50.8 27.68 10.312 12.7 64.64 38.1 61.9 34.92 12.598 15.875 79.36-32 -
4-1 Rod End with Stud AM.. D S 1.5max L W H heat treated, hard chromd plated d M T Outer ring Liner opper alloy heat treated, nickle or zinc plated A Stud heat treated, nickle or zinc plated N H W A D N d M L S T α AM4 1/4-28.281.375 1.562.750 1.000 AM4L 1/4-28L AM5 5/16-24.344.437 1.875.875 1.250 AM5L 5/16-24L AM6 3/8-24.406.500 1.938 1.000 1.250 AM6L 3/8-24L AM7 7/16-20.437.562 2.125 1.125 1.375 AM7L 7/16-20L AM8 1/2-20.500.625 2.438 1.312 1.500 AM8L 1/2-20L AM10 5/8-18.562.750 2.625 1.500 1.625 AM10L 5/8-18L AM12 3/4-16.687.875 2.875 1.750 1.750 AM12L 3/4-16L Stat o lbs 1/4-28.563 1.031.375.125 16 5260 5/16-24.594 1.219.437.125 14 7639 3/8-24.813 1.562.500.187 12 9544 7/16-20 1.000 1.750.562.220 14 10285 1/2-20 1.000 2.000.625.250 12 16238 5/8-18 1.375 2.500.750.375 16 17995 3/4-16 1.625 3.000.875.381 14 28081 AM4 1/4-28 7.14 9.53 39.67 19.05 25.4 AM4L 1/4-28L AM5 5/16-24 8.74 11.1 47.63 22.23 31.75 AM5L 5/16-24L AM6 3/8-24 10.31 12.7 49.23 25.4 31.75 AM6L 3/8-24L AM7 7/16-20 11.1 14.27 53.98 28.24 34.93 AM7L 7/16-20L AM8 1/2-20 12.7 15.88 61.93 33.32 38.1 AM8L 1/2-20L AM10 5/8-18 14.27 19.05 66.68 37.65 41.28 AM10L 5/8-18L AM12 3/4-16 17.45 22.23 73.03 44.45 44.45 AM12L 3/4-16L 1/4-28 14.3 26.19 9.53 3.18 16 5260 5/16-24 15.09 30.96 11.1 3.18 14 7639 3/8-24 20.65 39.67 12.7 4.75 12 9544 7/16-20 25.4 44.45 14.27 5.59 14 10285 1/2-20 25.4 50.8 15.88 6.35 12 16238 5/8-18 34.93 63.5 19.05 9.53 16 17995 3/4-16 41.28 76.2 22.23 9.68 14 28081-33 -
4-2 Rod End with Stud AF.. Outer ring Liner Stud heat treated, hard chromd plated opper alloy heat treated, nickle or zinc plated heat treated, nickle or zinc plated Olny Left Hand D S K A d.060max M L T W H N J H W A D N d M L S T α K J AF4 1/4-28 0.281 0.375 1.312 0.750 0.750 AF4L 1/4-28L AF5 5/16-24 0.344 0.437 1.375 0.875 0.750 AF5L 5/16-24L AF6 3/8-24 0.406 0.500 1.625 1.000 0.937 AF6L 3/8-24L AF7 7/16-20 AF7L 0.437 0.562 1.812 1.125 1.062 7/16-20L AF8 1/2-20 0.500 0.625 2.125 1.312 1.187 AF8L 1/2-20L AF10 5/8-18 0.562 0.750 2.500 1.500 1.500 AF10L 5/8-18L AF12 3/4-16 0.687 0.875 2.875 1.750 1.750 AF12L 3/4-16L Stat o lbs 1/4-28 0.563 1.031 0.375 0.125 16 0.469 0.375 6190 5/16-24 0.594 1.219 0.437 0.125 14 0.500 0.437 7639 3/8-24 0.813 1.562 0.500 0.187 12 0.687 0.562 9544 7/16-20 1.000 1.750 0.562 0.220 14 0.750 0.625 10285 1/2-20 1.000 2.000 0.625 0.250 12 0.875 0.75 15336 5/8-18 1.375 2.500 0.750 0.375 16 1.000 0.875 17995 3/4-16 1.625 3.000 0.875 0.381 14 1.125 1.00 28081 AF4 1/4-28 7.14 9.53 33.32 19.05 19.05 AF4L 1/4-28L AF5 5/16-24 8.74 11.1 34.93 22.23 19.05 AF5L 5/16-24L AF6 3/8-24 10.31 12.7 41.28 25.4 23.8 AF6L 3/8-24L AF7 7/16-20 11.1 14.27 46.02 28.24 26.97 AF7L 7/16-20L AF8 1/2-20 12.7 15.88 53.98 33.32 30.15 AF8L 1/2-20L AF10 5/8-18 14.27 19.05 63.5 37.65 38.1 AF10L 5/8-18L AF12 3/4-16 17.45 22.23 73.03 44.45 44.45 AF12L 3/4-16L 1/4-28 14.3 26.19 9.53 3.18 16 11.91 9.53 6190 5/16-24 15.09 30.96 11.1 3.18 14 12.7 11.1 7639 3/8-24 20.65 39.67 12.7 4.75 12 17.45 14.27 9544 7/16-20 25.4 44.45 14.27 5.59 14 19.05 15.88 10285 1/2-20 25.4 50.8 15.88 6.35 12 22.23 19.05 15336 5/8-18 34.93 63.5 19.05 9.53 16 25.4 22.23 17995 3/4-16 41.28 76.2 22.23 9.68 14 28.58 25.4 28081-34 -
5-1 Hydraulic Rod Ends GK DO D1 S1 a Spherical Plain GE E(S-2RS) l d L1 L2 L heat treated, black oxide-treated D4 6 D2 d S l D1 D2 S1 L L1 L2 D4 Dyn Stat o a Kg GK10DO 10 9 24 29 15 7 38.5 15 2 3 8.15 15.6 12 0.04 GK12DO 12 10 27 34 17.5 8 44 18 2 3 10.8 21.6 11 0.06 GK15DO 15 12 31 40 21 10 51 20 2.5 4 17 32 8 0.12 GK16DO 16 14 35 46 24 11 58 23 3 4 19 36 9 0.17 GK17DO 17 14 35 46 24 11 58 23 3 4 21.2 40 10 0.18 GK20DO 20 16 38 53 27.5 13 64.5 27.5 3 4 30 54 9 0.26 GK25DO 25 20 45 64 33.5 17 77 33 4 4 48 72 7 0.45 GK30DO 30 22 51 73 40 19 87.5 37.5 4 4 62 95 6 0.67 GK35DO 35 25 61 82 47 21 102 43 4 4 80 125 6 1.02 GK40DO 40 28 69 92 52 23 115 48 5 4 100 156 7 1.4 GK45DO 45 32 77 102 58 27 128 52 5 6 127 208 7 1.93 GK50DO 50 35 88 112 62 30 144 59 6 6 156 250 6 2.69 GK60DO 60 44 100 135 70 38 167.5 72.5 8 6 245 390 6 4.6 GK70DO 70 49 115 160 80 42 195 86 10 6 315 510 6 7.0 GK80DO 80 55 141 180 95 47 231 98 10 6 400 620 6 11.0-35 -
5-2 Hydraulic Rod Ends GF DO D1 S1 S a Spherical Plain GE E(S-2RS) l L d heat treated, black oxide-treated d S l D1 S1 L Dyn Stat o a Kg GF15DO 15 12 31 45 16 53.5 17 53 8 0.22 GF16DO 16 14 35 48 17.5 59 21.2 59 10 0.29 GF17DO 17 14 35 48 17.5 59 21.2 65 10 0.29 GF20DO 20 16 38 50 19 63 30 67 9 0.36 GF25DO 25 20 45 55 23 72.5 48 69.5 7 0.53 GF30DO 30 22 51 65 28 83.5 62 118 6 0.85 GF35DO 35 25 61 83 30 102.5 80 196 6 1.5 GF40DO 40 28 69 100 35 119 100 305 7 2.42 GF45DO 45 32 77 110 40 132 127 386 7 3.39 GF50DO 50 35 88 123 40 149.5 156 441 6 4.24 GF60DO 60 44 100 140 50 170 245 570 6 7.1 GF70DO 70 49 115 164 55 197 315 724 6 10.7 GF80DO 80 55 141 180 60 231 400 804 6 15.1 GF90DO 90 60 150 226 65 263 490 1340 5 23.4 GF100DO 100 70 170 250 70 295 610 1516 7 33.1 GF110DO 110 70 185 295 80 332.5 655 2340 6 48.5 GF120DO 120 85 210 360 90 390 950 3210 6 79.5-36 -
5-3 Hydraulic Rod Ends GN LO D1 S S1 a Spherical Plain GEEW..(-2RS) L l d heat treated, black oxide-treated d S l D1 S1 L Dyn Stat o a Kg GN20LO 20 20 38 50 19 63 30 74 4 0.36 GN25LO 25 25 45 55 23 72.5 48 95 4 0.54 GN32LO 32 32 65 70 27 100 62.5 168 4 1.12 GN40LO 40 40 69 100 35 119 100 268 4 2.5 GN50LO 50 50 88 123 40 149.5 156 362 4 4.6 GN63LO 63 63 107 145 50 179.5 248 570 4 9.3 GN70LO 70 70 115 164 55 197 315 800 4 11.25 GN80LO 80 80 141 180 60 231 400 874 4 15.75 GN90LO 90 90 150 226 65 263 490 1045 4 24 GN100LO 100 100 170 250 70 295 610 1330 4 33.95 GN110LO 110 110 185 295 80 332.5 655 1490 4 49-37 -
5-4-1 Hydraulic Rod Ends GIHR DO D1 S1 S a Spherical Plain GE E(S-2RS) heat treated, black oxide-treated D2 l L F D3 d LF L1 d S l D1 D2 S1 L L1 D3 LF F GIHR20DO 20 16 50 56 46 19 78 25 25 17 M16 1.5 Dyn Stat o a Kg 30 54 9 0.45 GIHR25DO 25 20 50 56 46 23 78 28 25 17 GIHR30DO 30 22 60 64 50 28 92 30 32 23 GIHR35DO 35 25 70 78 66 30 109 38 40 29 GIHR40DO 40 28 85 94 76 35 132 45 49 36 GIHR50DO 50 35 105 116 90 40 163 55 61 46 GIHR60DO 60 44 130 130 120 50 195 65 75 59 GIHR70DO 70 49 150 154 130 55 227 75 86 66 GIHR80DO 80 55 170 176 160 60 258 80 105 81 GIHR90DO 90 60 210 206 180 65 313 90 124 101 GIHR100DO 100 70 235 231 200 70 350.5 105 138 111 GIHR110DO 110 70 265 266 220 80 398 115 152 125 GIHR120DO 120 85 310 340 257 90 480 140 172 135 M16 1.5 M22 1.5 M28 1.5 M35 1.5 M45 1.5 M58 1.5 M65 1.5 M80 2 M100 2 M110 2 M120 3 M130 3 48 72 7 0.49 62 106 6 0.76 80 153 6 1.26 100 250 7 2.15 156 365 6 3.8 245 400 6 6.2 315 540 6 9.83 400 670 6 13.9 7 490 980 5 23.5 610 1120 7 32 655 1700 6 41 950 2900 6 72-38 -
5-4-2 Hydraulic Rod Ends GIHR-K DO D1 S1 S a Spherical Plain GE E(S-2RS) heat treated, black oxide-treated D2 l L F D3 d LF L1 d S l D1 D2 S1 L L1 D3 LF F K GIHR-K 20DO GIHR-K 25DO GIHR-K 30DO GIHR-K 35DO GIHR-K 40DO GIHR-K 50DO GIHR-K 60DO GIHR-K 70DO GIHR-K 80DO GIHR-K 90DO GIHR-K 100DO GIHR-K 110DO GIHR-K 120DO Dyn Stat o a Kg 20 16 50 56 46 19 78 25 25 17 M16 1.5 M8 18 30 54 9 0.44 25 20 50 56 46 23 78 28 25 17 M16 1.5 M8 20 48 72 7 0.47 30 22 60 64 50 28 92 30 32 23 M22 1.5 M8 25 62 106 6 0.77 35 25 70 78 66 30 109 38 40 29 M28 1.5 M10 30 80 153 6 1.24 40 28 85 94 76 35 132 45 49 36 M35 1.5 M10 35 100 250 7 2.12 50 35 105 116 90 40 163 55 61 46 M45 1.5 M12 40 156 365 6 3.74 60 44 130 130 120 50 195 65 75 59 M58 1.5 M16 45 245 400 6 6.49 70 49 150 154 130 55 227 75 86 66 M65 1.5 M16 50 315 540 6 9.88 80 55 170 176 160 60 258 80 105 81 M80 2 M20 55 400 670 6 14.2 90 60 210 206 180 65 313 90 124 101 M100 2 M20 60 490 980 5 20 100 70 235 231 200 70 350.5 105 138 111 M110 2 M24 65 610 1120 7 27.5 110 70 265 266 220 80 398 115 152 125 M120 3 M24 80 655 1700 6 45.6 120 85 310 340 257 90 480 140 172 135 M130 3 M24 85 950 2900 6 72-39 -
5-4-3 Hydraulic Rod Ends GIHN-K DO D1 S S1 a Spherical Plain GEEW..(-2RS) heat treated, black oxide-treated l L d LF L1 D2 F D3 d S l D1 D2 S1 L L1 D3 LF F K Dyn Stat o a Kg GIHN-K 12 12 38 32 32 11 54 14 16 17 M12 1.25 M5 14 10.8 24.5 4 0.11 12DO GIHN-K 16 16 44 40 40 13 64 20 21 19 M14 1.5 M6 14 17.6 36.5 4 0.2 16DO GIHN-K 20 20 52 47 47 17 75.5 22 25 23 M16 1.5 M8 20 30 48 4 0.35 20DO GIHN-K 25 25 65 58 54 22 94 27 30 29 M20 1.5 M8 20 48 78 4 0.62 25DO GIHN-K 32 32 80 71 66 28 115.5 32 38 37 M27 2 M10 25 67 114 4 1.15 32DO GIHN-K 40 40 97 90 80 33 142 41 47 46 M33 2 M10 30 100 204 4 2.18 40DO GIHN-K 50 50 120 109 96 41 174.5 50 58 57 M42 2 M12 35 156 310 4 3.96 50DO GIHN-K 63 63 140 136 114 53 208 62 70 64 M48 2 M16 40 255 430 4 6.8 63DO GIHN-K 70 70 160 155 135 57 237.5 70 80 76 M56 2 M16 40 315 540 4 9.6 70DO GIHN-K 80 80 180 170 148 67 265 78 90 86 M64 3 M20 50 400 695 4 13 80DO GIHN-K 90 90 195 185 160 72 287.5 85 100 91 M72 3 M20 60 490 750 4 19.1 90DO GIHN-K 100 100 210 211 178 85 315.5 98 110 96 M80 3 M24 60 610 1060 4 25 100DO GIHN-K 110 110 235 235 190 88 352.5 105 125 106 M90 3 M24 60 655 1200 4 32 110DO GIHN-K 125 125 260 265 200 103 392.5 120 135 113 M100 3 M24 70 950 1430 4 46 125DO GIHN-K 160 160 310 326 250 130 473 150 165 126 M125 4 M24 80 1370 2200 4 82.5 160DO GIHN-K 200DO 200 200 390 418 320 162 599 195 215 161 M160 4 M30 100 2120 3650 4 168-40 -
5-4-4 Hydraulic Rod Ends GIHO-K DO D1 S S1 a Spherical Plain GE..E(S-2RS) heat treated, black oxide-treated l L d LF L1 D2 F D3 d S l D1 D2 S1 L L1 D3 LF F K Dyn Stat o a Kg GIHO-K 12DO 12 10 42 35 40 8 59.5 16 17 15 M10 1.25 M6 14 10.8 17 11 0.12 GIHO-K 16DO 16 14 48 45 45 11 70.5 20 21 17 M12 1.25 M6 14 21.1 28.5 10 0.22 GIHO-K 20DO 20 16 58 55 55 13 85.5 28 25 19 M14 1.5 M8 18 30 42.5 9 0.43 GIHO-K 25DO 25 20 68 65 62 17 100.5 31 30 23 M16 1.5 M8 18 48 67 7 0.67 GIHO-K 30DO 30 22 85 80 77 19 125 35 36 29 M20 1.5 M10 20 62 108 6 1.25 GIHO-K 40DO 40 28 105 100 90 23 155 45 45 37 M27 2 M10 25 100 156 7 2.16 GIHO-K 50DO 50 35 130 120 105 30 190 58 55 46 M33 2 M12 30 156 245 6 3.9 GIHO-K 60DO 60 44 150 160 134 38 230 68 68 57 M42 2 M16 40 245 380 6 7.15 GIHO-K 80DO 80 55 185 205 156 47 87.5 82 90 64 M48 2 M20 50 400 585 6 15 GIHO-K 100DO 100 70 240 240 190 55 360 116 110 86 M64 3 M24 60 610 865 6 27.3-41 -
5-4-5 Hydraulic Rod Ends GAS D1 S1 S a d Spherical Plain GE E(S-2RS) l L LF L1 heat treated, black oxide-treated D2 K F D3 d S l D1 D2 S1 L L1 D3 LF F K GAS25 25 20 65 56 48 23 93 25 28 30 GAS30 30 22 75 64 56 28 107 30 34 35 GAS35 35 25 90 78 70 30 129 40 44 45 GAS40 40 28 105 94 78 35 152 45 55 55 GAS50 50 35 135 116 88 40 193 55 70 75 GAS60 60 44 170 130 118 50 235 65 87 95 GAS70 70 49 195 154 138 55 272 75 105 110 GAS80 80 55 210 176 168 60 298 80 125 120 GAS90 90 60 250 206 180 65 353 90 150 140 GAS100 100 70 275 230 188 70 390 105 170 150 GAS110 110 70 300 264 210 80 432 115 180 160 GAS120 120 85 360 340 240 90 530 140 210 190 GAS140 140 90 420 380 256 110 610 185 230 210 GAS160 160 105 460 480 290 110 700 200 260 240 M18 2 M24 2 M30 2 M39 3 M50 3 M64 3 M80 3 M90 3 M100 3 M110 4 M120 4 M150 4 M160 4 M180 4 M8 20 M8 22 M10 30 M12 30 M12 35 M16 45 M16 50 M20 55 M20 60 M20 65 M24 75 M24 85 M30 105 M30 105 Dyn Stat o a Kg 48 76 8 0.65 62 112 7 1 80 180 7 1.3 100 295 7 2.4 156 445 7 4.1 245 530 7 6.5 315 720 6 9.5 400 890 6 16 490 1300 5 28 610 1490 7 34 650 2050 6 44 950 2970 6 75 1080 3350 7 160 1370 4300 8 185 Shanghai Weiya Industry o.lt - 42 -
Fits of spherical plain bearings 1 Tolerance zero of fit 1.1 Fitted with radial of angular contact or thrust spherical plain bearing type Radial type Radial 1.2 Fitted with rod end Shaft With indeterminate loads Shaft Operating conditions Loads of all kinds, clerance or transition fit Loads of all kinds, interference fit Housing bore Operating conditions Sliding contact surface combination steel or bronze f8,h6,h7 Hardened shaft m6,n6 Sliding contact surface combination steel or bronze g6,h6 k6 Light loads, clerance or transition fit H6,H7 H7 Heavy loads, interference fit J7,M7 K7 Light allay housing N7 M7 Thread n6,p6 Male thread 6g Normal conditions h6,h7 Female thread 6H 1 Roughness of fitting surface (mm,um) The bore diameter or outside diameter of bearing Fitting surface 80 80 Ra Shaft surface 1.25 2.0 Bore surface of housing 1.6 2.5 Side of shaft shoulder, washer,housing bore shoulder 2.0 2.5 2 Shape and position tolerance of fitting surface (mm,um) Over -- 6 10 18 30 50 80 120 150 180 250 315 400 D or d incl 6 10 18 30 50 80 120 150 180 250 315 400 500 ylindricity Shaft diameter 4 4 5 6 7 8 10 12 12 14 16 18 - Housing bore - 4 5 6 7 8 10 12 12 14 16 18 20 Side beat of round circuity Shaft shoulder 8 9 11 13 16 19 22 25 25 29 32 36 - Housing bore shoulder Parallelism of two sides of washer - 9 11 13 16 19 22 25 25 29 32 36 40 12 15 18 21 25 30 35 40 40 46 52 57 63-43 - Shanghai Weiya Industry o.lt
Radial internal clearnal of spherical plain bearing 1 Spherical plain bearing 1.1 Type non-maintenance-free 1.1.1 Series E,HO,LO (mm,um) Bore over - 12 20 35 60 90 140 160 240 diamete incl 12 20 35 60 90 140 160 240 315 Group min 8 10 12 15 18 18 18 18 18 2 max 32 40 50 60 72 85 100 100 100 Group min 32 40 50 60 72 85 100 100 110 Normal max 68 82 100 120 142 165 192 192 214 Group min 68 82 100 120 142 165 192 192 214 3 max 104 124 150 180 212 245 284 284 318 1.1.2 Series G (mm,um) Bore over - 10 17 30 50 80 120 160 220 diamete incl 10 17 30 50 80 120 160 220 280 Group min 8 10 12 15 18 18 18 18 18 2 max 32 40 50 60 72 85 100 100 110 Group min 32 40 50 60 72 85 100 100 110 Normal max 68 82 100 120 142 165 192 192 214 Group min 68 82 100 120 142 165 192 192 214 3 max 104 124 150 180 212 245 284 284 318 1.1.3 Series Z (inch,um) 1.1.4 Series GEBK ( mm,um) Bore over - 0.625 2.0 3.0 Bore over - diamete incl 0.625 2.0 3.0 6 diamete incl 30 Group min 50 80 100 130 Group min 0 Normal max 150 180 200 230 Normal max 35 1.2 Type maintenance-free 1.2.1 GE..UK GE..FW (mm,um) 1.2.2 GE..FW-2RS (mm,um) Bore over - 12 20 Bore over - 30 50 80 diamete incl 12 20 30 diamete incl 30 50 80 120 Group min 4 5 6 Group min 0 0 0 0 Normal max 28 35 44 Normal max 50 60 72 85 1.2.3 GE..UK-2RS Bore over - 20 35 60 90 140 240 diamete incl 20 35 60 90 140 240 300 Group min 0 0 0 0 0 0 0 Normal max 40 50 60 72 85 100 110 2 Rod ends 2.1 Type non-maintenancr free 2.1.1 Series E,HO,LO Bore over - 12 20 35 60 diamete incl 12 20 35 60 80 Group min 23 30 37 43 55 Normal max 68 82 100 120 142 Shanghai Weiya Industry o.lt - 44 -
无锡天力轴承有限公司 上海崴崖实业有限公司 2.1.2 Series ZP (mm,um) Bore over - diamete incl 30 Group min 0 Normal max 35 2.1.3 Series ZJ (mm,um) Bore over - 8 14 20 35 diamete incl 8 14 20 35 50 Group min 10 15 40 50 60 Normal max 30 60 80 90 110 2.2 Type maintenance-free 2.2.1 Series T/K BK (mm,um) Bore over - 12 20 diamete incl 12 20 30 Group min 0 0 0 Normal max 32 40 50 2.2.2 Series GIR..UK (mm,um) Bore over - 12 20 35 60 diamete incl 12 20 35 60 80 Group min 0 0 0 0 0 Normal max 32 40 50 60 72-45 - Shanghai Weiya Industry o.lt
Assembly and lubrication for spherical plain bearings 1 Direction of load and position of split Direction of load 2 Simple example for assembly Position of split (a) (b) (c) 3 Mounting and dismounting (d) (a) (b) Shanghai Weiya Industry o.lt - 46 -
(c) (d) (e) 4 Lubrication and maintenance (a) (b) 5 Simple example for seaded (a) (b) - 47 - Shanghai Weiya Industry o.lt
(c) (d) (e) Shanghai Weiya Industry o.lt - 48 -