P/N 920-010521-04 Edition 4 SEP 17 EZ-4206/4216/4304
FCC COMPLIANCE STATEMENT FOR AMERICAN USERS This equipment has been tested and found to comply with the limits for a CLASS A digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense EMS AND EMI COMPLIANCE STATEMENT FOR EUROPEAN USERS This equipment has been tested and passed with the requirements relating to electromagnetic compatibility based on the standards EN50081-1 (EN55022 CLASS A) and EN61000-4-2/-3/-4/-5/-6/-8/-11 (IEC Teil 2,3,4) The equipment also tested and passed in accordance with the European Standard EN55022 for the both Radiated and Conducted emissions limits CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the equivalent type recommended by the manufacture Dispose of used batteries according to the manufacturer s instructions Specifications are subject to change without notice :,,,, 1
1 3 1-1 3 1-2 3 1-3 3 1-4 4 1-5 5 1-6 6 2 7 2-1 7 2-2 9 2-3 10 2-4 11 3 12 3-1 LCD/LED 12 3-2 13 3-3 14 3-4 14 3-5 15 3-6 15 3-7 16 3-8 17 4 18 4-1 18 4-2 18 4-3 19 4-4 20 MG-200 EZ-4206/4216/4304 2
1 1-1 EZ- Series LCD,,,, 300 (ID:1 ) (SRAM) 40 ( ) (Qlabel - III), 1-2 1-3,, <1> <2> <3> <4> <5>3 <6> <7> <8> CD ( / /Driver/DLL/ ) 3
1-4 EZ-4206 \ EZ-4216 EZ-4304 203 dpi 300 dpi 2 ~ 6 1 ~ 4 10mm~406mm 10mm~152mm 25mm~104mm 25mm~108mm : 006mm to 02mm : EZ-4206 6 (152 cm), 1 3 ID EZ-4216/EZ-4304 10 (254cm), 1 3 ID : 110mm; : 300 ; : 1,, / EZPL Qlabel III Windows DLL Code 39, Code 93, Code 128 (subset A,B,C), UCC 128, UPC A / E (add on 2 & 5), I 2 of 5, EAN 8 / 13 (add on 2 & 5), CODABAR, POSNET, EAN 128, DUN 14 2 MAXICODE, PDF417 CG Triumvirate, 10, 0 90 180 270, 8 PCX BMP, ICO WMF JPG EMF, LCD, LED:, Key:,, : : / PC : 40 F ~ 104 F (5 C to 40 C) : 30%~85% : -40 F ~ 122 F (-20 C to 50 C) : 10%~90% ( ) USB Datamatrix Code QR Code 4
1-5 (,, (P5), ) P1 P14 P2 P15 P3 P16 P4 P17 P5 P18 ( 1 ) P6 P19 ( ) P7 (STATUS) P20 P8 (POWER) P21 ( ) P9 (LCD) P22 P10 (STOP) P23 ( ) P11 (PAUSE) P24 P12 (FEED) P25 P13 ( ) P26 5
1-6 Interface cable Pin out : IBM PC : PIN NO FUNCTION TRANSMITTER 1 2-9 10 11 12 13 14-16 17 18 19-30 31 32 33 34-36 /Strobe Data 0-7 /Acknowledge Busy /Paper empty /Select N/C Chassis Ground +5V max 500mA Signal Ground N/C /Error Signal Groude N/C host host printer printer printer printer host printer ground : 9600 baud rate no parity 8 data bits 1 stop bit XON/XOFF protocol RTS/CTS DB9 female PIN NO 1 2 3 4 5 6 7 8 9 FUNCTION +5 V TXD RXD N/C GND N/C CTS RTS N/C PC PC(DTE) EZ-1000(DCE) --- 1 1 +5V RXD 2 2 TXD TXD 3 3 RXD DTR 4 4 N/C GND 5 5 GND DSR 6 6 N/C RTS 7 7 CTS CTS 8 8 RTS --- 9 9 N/C : DCE: Data communication Equipment DTE: Data terminal Equipment 6
2,,,, PVC,,, SETTING MODE ( 3-6 ) 2-1 1 (P5) 2, (P16) (P17) 3 (P16), (P17) 4 (P16) (P17) 5 (P18), (P13) 7
6 (P13), (P24) 7 (P19) (P24), (P17) 8 (P24),, 10 8
9 ( 2-2 ) 10 (P13), 11 (P5) 12 (P4), ( 3-2 ) 2-2 1 (P5) 2 (P15), 3 (P14) 4 (P18), (P13) 5 (P13), (P24), (P26) 6 (P24) 7 (P25), 8 (P13), 9 (P5) 10 (P4), ( 3-2 ) 9
2-3, ( ),,,,,,, 1 (P4), (P5) ( ) 2 (P18), (P13) 3 (P13), 4 ( ) 4,, 5, (P26) 6 (P13), 10
7 (P4), ( 3-2 ) 8 FEED, 9,, (P13), 10, (P13) 11 : 1, 2, 25mm 2-4 1 (P4) 2, (P1) 3 (P2) (P3) USB 1, 4 (P4), LCD (P9) EZ-XXXX Vxxxx 1 : (1)USB, ; (2) USB, Driver;,, 11
3 3-1 LCD/LED LCD LED STATUS POWER EZ-XXXX EZ-XXXX, Vxxxx Firmware 1 Vxxxx NOW IN, 14 3 SELFTEST NOW IN, 14 3 DUMPMODE AUTO, 15 3 SENSOR EZ-XXXX PAUSE EZ-XXXX CANCEL PRESS FEED KEY PROGRAM LOADING LOADING COMPLETE SETTING MODE (FLASH) 1 1 1, Pause FEED Firmware Firmware, 16 12
3-2 PAUSE PAUSE,, LCD EZ4206 PAUSE,, PAUSE, PAUSE,, 10, 2 PAUSE, 8 STOP STOP, LCD xxxxxxxx CANCEL, 10, 2 STOP, 8, FEED FEED,, FEED, FEED,, 15 13
3-3,, Feed, 5,,, 1, FEED (P12) 2 ( FEED ), 3 FEED 3 1,, LCD NOW IN SELF TEST, EZ-XXXX LABEL PRINTER VERSION : Vxxx CODE 39 EAN 8 EAN 13 CODE 93 UPC E UPC A I 2/5 CODABAR CODE 128 MAXI CODE PDF417 3-4, Dump Mode,, 8,, 8, 1, FEED (P12) 2 ( FEED ) 3 3--4,, FEED, DUMP MODE BEGIN, LCD NOW IN DUMP MODE, 4,, :, FEED, OUT OF DUMP MODE, ( ) 14
3-5 ( ),, ( ) 1, PAUSE 2 ( PAUSE ), 3 LCD AUTO SENSOR, 3 LCD : 00000224, (Gap) 224 dots ( ), 203DPI, dot mm 8:1, 28mm (224/8=28) 4 3-6 Firmware, 1 Firmware 2 LCD Program Loading,, (STATUS) 3 LCD Loading Complete,, 4 15
3-7 (Setting mode), ( ) ( ) 1 Pause, FEED,, LCD SETTING MODE 2, 3, : FEED : FAUSE : STOP : 4, 5, 6, Printing mode ( ) : (Thermal Transfer):,,, (Direct Thermal):, Option Set ( ): (Strip mode): (Cutter mode): (Option OFF):, Paper Set ( ): (Black Mark): (Gap Paper): ( ), (Plain Paper): COM Port Set ( ): (Baud Rate): 4800 / 9600 / 19200 / 38400 bits, 9600 (Parity Set): None / Odd / Even Parity, None Parity (Data Lengh): 7 / 8 bits, 8 bits (Stop bit): 1 / 2 bits, 1 bit Auto Sensor( ) Auto mode: Gap mode: Black mode: Setting Review ( ): :,, EZ-4206, SETTING MODE 16
3-8 LCD 2 LCD LED STATUS POWER Waiting 2 4 Ribbon 2 3 End Paper 2 2, Out Auto Sensing :,, Paper 2 2 /, Jam Syntax 2 2, Error Memory 2 2 Full ( ) ~X4, Filename 2 2 No found Filename 2 2 Repeat Stripper Error 2 2 17
4 4-1 (P22), ( ),, : 1 (P18), (P13) 2 (P13), (P22) 3 (P22), 4-2 1 A 2,, #M3 A, 3,, A 35mm 28 29mm 18
4-3 (P16) 1 (P16) (P13) 2 (P16) PRINTER HEAD ASSEMBLY 19
4-4, LCD, LED, ( POWER/ STATUS) ( ) ( ),,,,,, ( ),,, ~T ( ),,, 016mm,, 16, (SRAM),, 20