使用手冊 A200 無線 microsd 轉接卡 Version:1.0
目 錄 產品介紹...3 包裝內容...3 快速使用手冊...3 產品特色...4 支援格式...4 系統需求...5 認識 PQI Air Card...5 安裝 PQI Air Card App:AirCard+...6 連線到 PQI Air Card...7 開始使用 AirCard+ App...8 照片 : 檢視圖片...8 音樂 : 搜尋音樂...10 影片 : 觀賞影片...11 設定...11 Reset...14 NCC/DGT 警語...15 FCC Compliance and Advisory Statement...15 2
產品介紹 恭喜您購買 PQI Air card, 一款無線 microsd 轉接卡 將 microsd 記憶卡放入這款無線轉接卡, 就成為一張 WiFi SD 記憶卡 放入相機內, 啟動電源, 即可開始享受無線傳輸的方便功能 透過無線功能可將數位資訊傳輸到您的 iphone ipad ipod touch 或其他 Android 智慧型手機或平板電腦等具 Wi-Fi 功能裝置, 隨時瀏覽 隨時將美麗的照片 精彩的影片分享給您的家人朋友 PQI Air card 可支援 3 人同時連線至裝置內讀取檔案 提醒 : (1) Wi-Fi 資料傳輸率會依使用環境 搭配的相機 距離及使用人數而改變 建議 : 請先關閉相機省電模式, 避免使用 WiFi 功能時, 因電源關閉而中斷連線 包裝內容 PQI Air Card 記憶卡 ( 選配 ) PQI microsd 記憶卡 快速使用手冊 3
產品特色 隨插即用, 簡單方便瀏覽照片播放音樂播放影片支援 Wi-Fi WPA2 加密支援 ios 與 Android 系統專為 ios 設計的應用程式 (App) 專為 Android 設計的應用程式 (App) 專為 Kindle 設計的應用程式 (App) 無線分享圖片 影片 音樂可隨意變換容量, 支援 SDHC Card 容量 (4GB to 32GB) 可同時支援 3 台裝置無線傳輸, 讀取不同檔案 支援格式 依所使用之裝置平台有所不同 ios 平台支援格式 : 圖片 :.jpg,.png 音樂 :.mp3,.wav,.aif 影片 :.mp4,.mov Android 平台支援格式 :: 圖片 :.jpg,.png, bmp,.gif 音樂 :.mp3,.mp4,.3gp,.wav,.ogg,.imy,.aif 影片 :.mp4,.3gp 圖片音樂影片 4
系統需求 使用 AirCard+ 裝置需求 : ios 裝置 : iphone 3GS 4 4S ipod touch(gen4) 和 ipad. ( 建議使用 ios4.0 以上 ) Android 裝置 : 使用 Android 2.1 以上 認識 PQI Air Card 使用前, 先將 microsdhc 記憶卡 (4GB 到 32GB) 插進 PQI Air 無線轉接卡裡面 將已插卡的 PQI Air Card 放進所使用的相機內 5
安裝 PQI Air Card App:AirCard+ AirCard+ 是專門為 PQI Air Card 所開發的多媒體應用程式, 適用於 ios 與 Android 裝置, 讓使用 者可以無線存取相機記憶卡內的檔案 AirCard+ 會特別將記憶卡內的圖片檔 音樂檔與影片檔分 類, 您可以更快速的找到所需的檔案 在 ios 裝置上安裝 AirCard+ App 1. 使用 ios 上 App Store 的的功能, 並搜尋 AirCard+ 或 PQI 2. 選擇 AirCard+, 進入下載畫面, 點選 FREE, 再點選 INSTALL APP 開始安裝 3. 一旦完成安裝, 就會顯示在您 ios 裝置的頁面 在 Android 裝置上安裝 AirCard+ App 1. 使用 Android 上 Google Play 的功能, 並搜尋 AirCard+ 或 PQI 2. 選擇 AirCard+, 進入下載畫面, 點選 免費應用程式, 再點選 下載 開始安裝 3. 一旦完成安裝, 就會顯示在您 Android 裝置的頁面 6
連線到 PQI Air Card ios/android 裝置請依循以下步驟 : (1) 將已放入 microsd 記憶卡的 PQI Air card 裝進相機內 (2) 開啟相機電源, 約 25 秒後, 無線功能啟動 (3) 在您的 ios/android 裝置的 設定 功能中點選 Wi-Fi 功能, 在清單中選取 PQI Air card 以開啟連線 (4) 連線後, 開啟手持裝置上 AirCard+ 應用程式, 即可開始使用 WiFi 瀏覽與下載等功能 使用網頁瀏覽方式, 請依循以下步驟 : (1) 將已放入 microsd 記憶卡的 PQI Air card 裝進相機內 (2) 開啟相機電源, 約 25 秒後, 無線功能啟動 (3) 使用您的 Wi-Fi 裝置連線至 Air Drive 以開啟連線 (4) 連線後, 開啟 Internet 瀏覽器並且在網址列輸入 192.168.1.1 (5) 網頁開啟後, 即可瀏覽或下載儲存在 PQI Air card 中的照片及影片 7
開始使用 AirCard+ App 當您的 ios/android 裝置無線連線至 PQI Air Card 後, 您可以使用 AirCard+ App 來瀏覽檔案及 進行簡單的操作 重要提醒 : 請確認檔案格式為您的 ios/android 裝置所支援的格式 當您進入 AirCard+ 的主畫面後, 可以看見以下功能頁面 : 照片 : 檢視圖片 支援格式 點選後, 會顯示 PQI Air Card 中所有支援的圖片檔案 支援的檔案類型, 請參照支援格式 點選需要的檔案, 即可以投影片模式顯示內容 8
上傳照片 點選後, 出現裝置內建相簿內容, 選取所需相片, 即可儲存到 PQI Air Card 內 點擊 後, 出現功能選項 : 重新整理 (Refresh)/ 選擇圖片 (Select Images)/ 離開程式 (Exit)/ 取消 (Cancel), 依需求選取功能 9
點選 : 選擇圖片 功能, 勾選所需要的圖片, 依個人喜好可 : 存到裝置內的相本內 以電子郵件寄出 或是上傳到 Facebook ( 當 PQI Air card 連線到有網際網路功能的熱點時 ) 音樂 : 搜尋音樂 支援格式 點選後, 會自動將所有支援的音樂檔案顯示在同一頁面 支援的檔案類型, 請參照支援格式 選取喜愛的音樂, 即可開始播放 10
影片 : 觀賞影片 點選後, 會自動將所有支援的影片檔案顯示再同一頁面, 點選想要播放的影片, 將會開始播放 支援的檔案類型, 請參照支援格式支援格式 支援格式 設定 分為四個設定主題 : 1. 熱點 /Hotspots 預設 PQI Air Card 可連線的熱點與密碼, 設定完成後, 請按 儲存 11
2. 無線網路設定 /AirCard Setting (1) WiFi SSID 預設為 PQI Air card, 您可依個人喜好設定新的裝置名稱 (2) WiFi Password / Password Switch 可選擇開啟或關閉 開啟後, 設定連線密碼, 保護資料被未授權連線讀取 至少輸入 8 個字碼, 最長可輸入 63 個字碼, 數字 0-9 及英文字母 A-Z( 有分大小寫 ) 都可 (3) Channel 選取 PQI Air card 所使用的 Wi-Fi 頻道, 變換頻道可以防止與現存無線網路頻道衝突, 共 11 個頻道可供選擇 (4) Auto WiFi Mode 12
Enable: 相機一開啟就啟動 WiFi 連線 ( 出廠預設值 ) Disable: 使用者以手動方式開啟 WiFi 連線 開啟方式 : 相機進入瀏覽模式, 點選 PQI Air card 內建的功能圖片 (Enaable WiFi), 接者刪除該圖片, 約 25 秒後, 無線功能啟動 3. 儲存 /Save 在設定頻道 SSID Wi-Fi 密碼等設定後, 按儲存鍵, 待下次重新啟動後, 設定值生效 4. 連線到熱點 /Connect to Hotspot 點選後,PQI Air card 會依 Hotspots 欄位設定的順序作連結 您也可以由相機上來進行 Hotspot 連線 開啟方式 : 相機進入瀏覽模式, 點選 PQI Air card 內建 的功能圖片 (Connect to Hotspot), 接者刪除該圖片, 約 25 秒後,PQI Air card 就會依照預先儲存 的 Hotspot 設定, 進行 Hotspot 連線 13
Reset 連線 PQI Air Card, 選擇相機瀏覽模式, 點選 PQI Air card 內建的功能圖片 (Factory Reset), 接者刪 除該圖片, 約 10 秒後, 即還原成預設值 重要提醒 : 若您的 PQI Air card 無法正常運作, 或是您忘記密碼, 而無法連進 PQI Air card 操作時, 請依上述步驟在相機上執行 Reset 或者將 PQI Air card( 含 microsd 卡 ) 接上電腦, 開啟資料夾 DCIM\199_WiFi, 刪除 WSD00003.JPG, 即可啟動 Reset 功能, 恢復原廠設定值 此一動作不會造成 PQI Air card 內的資料遺失 14
第十二條 NCC/DGT 警語 型式認證合格之低功率射頻電機, 非經許可, 公司 商號或使用者均不得擅自變更頻率 加大功 率或變更原設計之特性及功能 第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信 ; 經發現有干擾現象時, 應立即停用, 並改善至無干擾時方得繼續使用 前項合法通信, 指依電信法規定作業之無線電通信 低功率射頻電機須忍受合法通信或工業 科學及醫療用電波輻射性電機設備之干擾 FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/tv technician for help. Any special accessories needed for compliance must be specified in the instruction manual. WARNING: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of 15
other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. FCC SAR Statement: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 1 cm between the radiator & your body. 16