Microsoft Word - SCS01604A0JEW10 [McTronic].doc

Transcription

1 OT MATRIX LIQUI CRYSTAL ISPLAY MOULE COMPANY NAME:Mctronic USER MANUAL SC64A- Serial LC Module escription: SCS64AJEW esign PROPOSE Y Approved APPROVE SEC TECHNOLOGY CORP. ARESS: F, No., Shing e Rd., San Chung City 24 Taipei Hsien, Taiwan R.O.C. TEL: / FAX: / sdec845@ms6.hinet.net/sdec@sdec.com.tw

2 SCS64AJEW LCM SAMPLE APPROVAL ( 液晶顯示模組樣品確認書 ). PART A:FILLE Y SEC TECH( 由 SEC 填寫 ) ) COMPANY NAME( 客戶名稱 ):Mctronic 2) SEC ITEM NO.( 產品型號 ):SCS64AJEW 3) CUSTOMER ITEM NO.( 客戶產品型號 ): 4) LCM Function (LCM 內容 ): A LC TYPE (LC 種類 ): TN, HTN, STN, FSTN, FSTN ( POSITIVE/ 正向, NEGATIVE/ 反向, LACK MASK/ 內黑絲印 ) VIEWING AREA ( 視角方向 ): 3H, 6H, 9H, 2H C POLARIZER COLOR ( 偏光板顏色 ): GRAY/ 灰色, YELLOW GREEN/ 黃綠色, LUE/ 藍色, LACK/ 黑色 ACKLIGHT COLOR ( 背光顏色 ): YELLOW GREEN/ 黃綠光, ORANGE/ 橘光 AMER/ 琥珀光, RE/ 紅光, LUE/ 藍光, GREEN/ 翠綠光, WHITE/ 白光, WHITE(Patent)/ 專利白光, OULE COLOR/ 雙色光, RG/ 三色光 E TEMPERATURE ( 溫度 ): NORMAL/ 常溫, WIE/ 廣溫 F CONTROL IC ( 控制 IC):SPLC78- SAMPLE ELIVERY ATE( 出樣日期 ): PART :FILLE Y CUSTOMER( 請客戶填寫 ) CHECK LIST ITEMS( 檢查項目 ): OK NG REASON( 原因 ) ).LCM SIZE AN THICKNESS:(LCM 尺寸及厚度 ): 2).POLARIZER COLOR:( 偏光板色澤 ): 3).ELECTRO CHARACTERISTIC:( 電氣特性 ): 4).VIEWING AREA( 視角範圍 ): 5).ACKLIGHT ILLIMINATION( 背光亮度 ): 6).TEMPERATURE RANGE( 溫度範圍 ): APPROVE Y( 批准 ): ATE OF APPROVAL( 批准日期 ): Ver /9

3 SCS64AJEW REVISION RECOR Revision Page Contents 2.7 First Release Version 2. 2 Sample elivery ate Ver /9

4 SCS64AJEW SEC LC Module Numbering System S C S 4 4 A H L T S G F A J C W S H 7 8 A N N Numbering System Code Value escription Remark Company S S Company name abbreviated SEC CO.,LT 2 LCM type G C G O T S :ig Character C:Character G:Graphic O:COG T:TA S:Seven Segment :Customer esign LCM type 3 LC type S T H S F R M V A L 4,5,6 Row dots number Characters per line Year 7,8 Column dots number Lines Month 9, LC module serial number Polarizer Color & Viewing angle type 28 22,28,24, ,6,2,4... 6, ,64,28,24...,2,4...,2..2 A I A~ZZ A C E F G H I J K L M 2 acklight type L N L E C F 3 acklight color (VF color) Y N O A G R Y W P T 4 Font Code Type 2 3 A C F U Z TN type LC HTN type LC STN type LC FSTN type LC FSTN type LC Color TN / Color STN TFT LC VF VATN OLE Row dots number Characters per line Year Column dots number Lines Month LC module serial number Gray Mode/3:view Gray Mode/6:view Gray Mode/9:view Gray Mode/2:view Yellow Green Mode/3:view Yellow Green Mode/6:view Yellow Green Mode/9:view Yellow Green Mode/2:view Negative type/3:view Negative type/6:view Negative type/9:view Negative type/2:view Other Without backlight Array LE Edge LE C.C.F.L EL Without backlight Orange Amber lue Green Red Yellow-green White White(Patent) ouble Color(Y-G&R) R G No Font Table English-Japanese Font Code English-Europe Font Code English-Russian Font Code IG-5 Chinese Font Code G Chinese Font Code ST792-C Font Code ST792-F Font code (Korean) Unicode Other Font Code LC type Graphic Character Seven Segment Graphic Character Seven Segment Ux -> US Port Interface Sx ->Series Port Interface Rx -> RS-232 Port Interface Polarizer Color & Viewing angle type acklight type acklight color Font Table Code Type 5 Series Code ~Z Series Code Ver /9

5 SCS64AJEW CONTENTS PAGE LCM Sample Approval 2 REVISION RECOR 3 LC Module Number System 4. Mechanical Specification 6 2. Mechanical iagram 6 3. Interface Pin Connections 6 4. lock iagram 6 5. Absolute Maximum Ratings 7 6. Electrical Characteristics 7 7. Optical Characteristics 7 8. Optical efinitions 7 9. isplay Address 7. Interface to MPU 8. Interface to Z-8 CPU 8.2 Interface to MC68 CPU 8.3 Interface to 4-bit CPU (HMCS43C) 8.4 Interface to H685 MP 8. Timing Control 8. Write and Read Operation 8.2 usy flag check timing 8 2. Initialization of LCM 9 3. Instruction Set 4. User Font Patterns 5. Software Example 5. 8-bit operation (8 bits 2 lines) bit operation (4 bits 2 lines) 6. Character Generator ROM Map 2 7. Function Test & Inspection Criteria 3 8. Reliability Test Normal Temperature 5 9. Reliability Test Wide Temperature 6 2. Precautions Against Product Handling 7 2. Warranty 8 Ver /9

6 SCS64AJEW. Mechanical Specification ITEM STANAR VALUE UNIT NUMER OF CHARACTERS 6 CHARACTERS X 4 LINES -- CHARACTER FORMAT 5 X 8 OTS -- MOULE IMENSION NO ACKLIGHT -- mm MOULE IMENSION ARRAY LE ACKLIGHT -- mm MOULE IMENSION EGE LE ACKLIGHT (LUE) 87. (W) X 6. (H) X 2.5 (T) mm VIEWING ISPLAY AREA 62. (W) X 25. (H) mm ACTIVE ISPLAY AREA 56.2 (W) X 2.8 (H) mm CHARACTER SIZE 2.95 (W) X 4.75 (H) mm CHARACTER PITCH 3.55 (W) X 5.35 (H) mm OT SIZE.55 (W) X.55 (H) mm OT PITCH.6 (W) X.6 (H) mm ARRAY LE ACKLIGHT COLOR -- ACKLIGHT INPUT -- V -- ma ACKLIGHT HALF-LIFT TIME -- HR. EGE LE ACKLIGHT COLOR WHITE ACKLIGHT INPUT C +4.V V 52 (Type) ma ACKLIGHT LIFT TIME 2, (AVOI LIGHTING CONTINUOUSLY,Ta=25,If=2mA) HR. 2. Mechanical iagram 3. Interface Pin Connections 4. lock iagram NO SYMOL LEVEL FUNCTION VSS -- GN (V) 2 V -- C +5V 3 VO -- Contrast Adjust 4 RS H/L Register select 5 R/W H/L Read/Write 6 E H,H L Enable signal 7 H/L ata it 8 H/L ata it 9 2 H/L ata it 2 3 H/L ata it 3 4 H/L ata it H/L ata it H/L ata it H/L ata it 7 5 A(+) C+5.V LE acklight + 6 K(-) V LE acklight - Ver /9

7 SCS64AJEW 5. Absolute Maximum Ratings ITEM SYMOL MIN. TYPE MAX. UNIT INPUT VOLAGE VI VSS V V SUPPLY VOLTAGE FOR LOGIC V-VSS V SUPPLY VOLTAGE FOR LC V-VO 6.5 V TN NORMAL TEMPERATURE RANGE OPERATING ~+5 STORAGE -~+6 HTN WIE TEMPERATURE RANGE OPERATING -2~+7 STORAGE -3~+8 STN FSTN WIE TEMPERATURE RANGE OPERATING -2~+7 STORAGE -3~+8 STATIC ELECTRICITY e sure that you are grounded when handing LCM. 6. Electrical Characteristics ITEM SYN CONITION MIN. TYPE MAX. UNIT SUPPLY VOLTAGE FOR LOGIC V-VSS V SUPPLY VOLTAGE FOR LC V-VO Ta=-2 Ta=+25 Ta=+7 INPUT HIGH VOLTAGE VIH 2.2 V V INPUT LOW VOLTAGE VIL.6 V OUTPUT HIGH VOLTAGE VOH 2.4 V OUTPUT LOW VOLTAGE VOL.4 V SUPPLY CURRENT I V=+5V ma 7. Optical Characteristics Ta at 25 ITEM SYM CONITION MIN. TYPE MAX. UNIT VIEW ANGLE (TOP/OTTOM) θ2 / θ CR 5 35 o / 45 o deg. VIEW ANGLE (LEFT/RIGHT) φ / φ2 CR 5 35 o / 35 o deg. CONTRAST RATIO CR 8 RESPONSE TIME (RISE) TON/Tr 7 ms RESPONSE TIME (ECAY) TOFF/Tf 22 ms 8. Optical efinitions Response Time Contrast Ration View Angle Nonselected Condition tightness Rise Time 9. isplay Address Nonselected Condition Fall Time rightness of nonselected segment (2) Contrast Ration (K) = rightness of selected segment () tightness rightness curve of selected segment Set Point riving Voltage rightness curve of nonselected segment 4. X (Left) Y(TOP) θ EYE θ Y(OTTOM) V V V X (Right) Line A 8 8C 8 8E 8F Line 2 C C C2 C3 C4 C5 C6 C7 C8 C9 CA C CC C CE CF Line A 9 9C 9 9E 9F Line A C E F Line Line 2 Line 3 Line Ver /9

8 . Interface to MPU. Interface to Z-8 CPU.2 Interface to MC68 CPU SCS64AJEW.3 Interface to 4-bit CPU (HMCS43C).4 Interface to H685 MP. Timing Control. Write and Read Operation Write Operation Read Operation Item Symbol Limit (Min.) Limit (Max.) Unit Enable Cycle Time tcyce 4 -- ns Enable Pules Width ( High level ) PWEH 5 -- ns Enable Rise/Fall Time ter,tef ns Address Set-Up Time ( RS,R/W,E ) tas 3 -- ns Address Hole Time tah -- ns ata Set-Up Time tsw 4 -- ns ata elay Time tr -- ns ata Hold Time thr 2 -- ns.2 usy flag check timing Note: IR7, IR3: Instruction 7th bit, 3rd bit; AC3: Address Counter 3rd bit. Ver /9

9 2. Initialization of LCM SCS64AJEW The LCM automatically initializes (reset) when power is turned on using the internal reset circuit. If the power supply conditions for correctly operating of the internal reset circuit are not met, initialization by instruction is required. Use the procedure is next page for initialization. Internal Power Supply reset Vcc.2V 4.5V toff trcc (Note ) ms trcc. ms, toff ms. (Note 2) toff stipulates the time of power OFF for momentary power supply dip or when power supply cycles ON and OFF. Item Symbol Test condition Limit (Min.) Limit (Max.) Unit Power supply rise time trcc --. ms Power supply off time toff ms (a) 8-bit interface (b) 4-bit interface Power ON Wait more than 5ms after V rises to.9v Function Set RS R/W * * * * Wait more than 4. ms Function Set RS R/W * * * * Wait more than μs Function Set RS R/W * * * * Wait more than μs or usy Flag Check Function Set RS R/W N F * * isplay Off RS R/W isplay Clear RS R/W Entry Mode Set RS R/W I/ S Write data to the /CG RAM and set the Instruction Power ON Wait more than 5ms after V rises to.9v Function Set RS R/W Wait more than 4. ms Function Set RS R/W Wait more than μs Function Set RS R/W Wait more than μs or usy Flag Check Function Set RS R/W Function Set RS R/W N isplay Off RS R/W isplay Clear RS R/W Entry Mode Set RS R/W F * I/ Write data to the /CG RAM and set the Instruction * S Ver /9

10 3. Instruction Set FUNCTION R S R /W 7 Clear isplay Return Home x Entry mode set isplay ON/OFF control Cursor or isplay shift Function Set Set CG RAM address Set RAM address Read busy flag & address Write ata to CG/RAM Read ata for CG/RAM I / C S ESCRIPTION SCS64AJEW Clears entire display and returns the cursor to home position (address ). Return the cursor to the home position. Also returns the display being shifted to the original position. RAM contents remain unchanged. Set cursor move direct and specifies display shift. These operations are performed during data rite/read. For normal operation, set S to zero. I/=: increment; : decrement; S=: accompanies display shift when data is written, for normal operation, set to zero. Set ON/OFF all display (), cursor ON/OFF(C), and blink of cursor position character(). =: ON display; :OFF display. C=: ON cursor;: OFF cursor. =: ON blink cursor; : OFF blink cursor. S / C R / L x x Move the cursor and shift the display without changing RAM contents. S/C=: isplay shift; :Cursor move. R/L=: shift to right; : shift to left. Set the interface data length (L). Number of display N F x x lines (N) and character font (F). L=: 8 bits; :4 bits. L N=: 2 lines; : lines. F=: 5x dots; : 5x7 dots. ACG Set CG RAM address. CG RAM data is sent and received after this setting. A Set RAM address. RAM data is sent and received after this setting Reads usy Flag (F) indicating internal operation is AC being performed and reads address counter contents. F F=: internally operating. : can accept instruction EXECU. TIME (27KHz).52ms.52ms 38μs 38μs 38μs 38μs 38μs 38μs WRITE ATA Write data into RAM or CG RAM. 38μs REA ATA Read data from RAM or CG RAM 38μs 4. User Font Patterns ( CG RAM Character ) Character Code ( RAM data) CG RAM Address Character Pattern (CG RAM data) Hi Lo Hi Lo x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x -- Ver /9

11 5. Software Example 5. 8-bit operation (8 bits 2 lines) Function R S R w isplay escription SCS64AJEW Power on delay Initialization. No display appears. Function set x x Sets to 8-bit operation and selects 2-line display and 5x7 dots character font. (Note: number of display lines and character fonts cannot be changed after this.) isplay OFF Turn off display. isplay ON Turn on display and cursor Entry Mode Set Write data to CG/ RAM Write data to CG/ RAM Set mode to increment the address by one and to shift the cursor to the right, at the time of write, to the /CG RAM isplay is not shifted. S Write S. Cursor incremented by one and shift to right. SEC Write, E, and C. Set RAM SEC Set RAM address so that the cursor is propositioned at the head of the second line. Write data to CG/ RAM * * SEC CR Write C and R. Cursor or display shift x x SEC CR Shift only the cursor position to the left. Write data to CG/ RAM * * SEC CO., LT. Write O., LT.. Entry Mode SEC Set display mode shift at the time during writing operation. Set CO., LT. Write data to EC Write x. Cursor incremented by one and shift to right. CG/ RAM O., LT. x (The display move to left.) Write data to CG/ RAM * * Write other characters. Return Home SEC CO., LT. Return both display and cursor to the original position (Set address to zero) bit operation (4-bit, line) Function RS R/ W isplay escription Power on delay Initialization. No display appears. Function set Sets to 4-bit operation. In this case, operation is handled as 8-bits by initialization, and only this instruction completes with one write. Function set Sets 4-bit operation and selects -line display and 5x7 x x dot character font on and resetting is needed. (Number of display lines and character fonts cannot be changed hence after). isplay ON/OFF Control Turn on display and cursor. Entry Mode Set Write data to CG/ RAM S same as 8-bit operation Set mode to incremented the address by one and to shift the cursor to the right, at the time of write. To the /CG RAM display is not shifted. Write S. Cursor incremented by one and shift to right. Ver /9

12 SCS64AJEW 6. Character Generator ROM Map Lower 4 bit Higher 4 bit xxxx CHARACTER PATTERN CHART(5x7OTS+CURSOR) CG RAM () xxxx (2) xxxx (3) xxxx (4) xxxx (5) Lower 4-bit (-3) of Character Code (Hexadecimal) xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx (6) (7) (8) () (2) (3) (4) (5) (6) (7) xxxx (8) Ver /9

13 SCS64AJEW 7. Functional Test & Inspection Criteria 7. Sample plan Sample plan according to MIL-ST-5 level 2, and acceptance/rejection criteria is. ase on: Major defect: AQL.65 Minor defect: AQL Inspection condition Viewing distance for cosmetic inspection is 3cm with bare eyes, and under an environment of 8 lus (2W) light intensity. All direction for inspecting the sample should be within 45 against perpendicular line. 7.3 efinition of Inspection Zone in LC A C Zone A: Character / igit area Zone : Viewing area except Zone A (Zone A + Zone = minimum Viewing area) Zone C: Outside viewing area (invisible area after assembly in customer s product) Note: As a general rule, visual defects in Zone C are permissible, when it is no trouble for quality and assembly of customer s product. 7.4 Major efect All functional defects such as open (or missing segment), short, contrast differential, excess power consumption, smearing, leakage, etc. and overall outline dimension beyond the drawing. Are classified as major defects. 7.5 Inspection Parameters And Glass Pixel( 偏光板和玻璃圖像檢驗 ) No Polarizer ( 偏光片 ) Criteria lack or White spots Zone Acceptable number ( 可接受數量 ) and Piercing imension (mm) A C ( 黑 / 白點和刺孔 ).5 * * *.5 < *.2 < *.3 < * [ 面積 ]=(Length[ 長度 ]+Width[ 寬度 ])/2 *:isregard ( 忽略 ) 2 Scratch ( 刮傷 ) Zone Zone Acceptable number ( 可接受數量 ) X(mm) Y(mm) A C *.4 W * * * 3. L.6 W 4 4 * 2. L.8 W 2 2 * --. W * X:Length[ 長度 ] Y:Width[ 寬度 ] *:isregard( 忽略 ) 3 Air ubbles (between glass & polarizer) 氣泡 ( 玻璃跟偏光板之間 ) Zone Acceptable number ( 可接受數量 ) imension (mm) A C.2 * * *.2 < *.5 < * *:isregard( 忽略 ) Ver /9

14 SCS64AJEW 4 Glass of Pixel ( 玻璃的圖像 ) ()Pixel shape (with ent) / 圖像凹度 Less than.52 mm is no counted ( 小於.52mm 者不計 ) (2)Pixel shape (with Projection)/ 圖像凹度 Should not be connected next pixel ( 點與點間不可先連接 ) (3)eformation/ 變形 ( X + Y ) / 2.5mm Less than. mm is no counted ( 小於.5mm 者不計 ) (4) eformation/ 變形 ( X + Y ) / 2.3mm Less than.3 mm is no counted ( 小於.3mm 者不計 ) Ver /9

15 SCS64AJEW 8. Reliability Test ( 測試條件 ) Normal Temperature ( 常溫 ) No change no display and in operation under the following text condition. ( 在不改變原先顯示下進行以下測試操作 ) Conditions : Unless otherwise specified, test will be conducted under the following condition. Temperature : 2±5 Humidity: 4±5%RH Tests will be not conducted under functioning state. ( 條件 : 除非其他特殊情況, 否則測試將以溫度 :2±5, 濕度 :4±5%RH 為主 ) NO Parameter Conditions Notes High Temperature Operating 5 ±2, 96 hrs (operation state) (96 小時, 溫度 5 ±2 電源開啟的操作情況下 ) 2 Low Temperature ±2, 96 hrs (operation state) Operating (96 小時, 溫度 ±2 電源開啟的操作情況下 ) 3 High Temperature 6 ±2, 96 hrs 2 Storage (96 小時, 溫度 6 ±2 電源關閉靜態操作下 ) 4 Low Temperature - ±2, 96 hrs, 2 Storage (96 小時, 溫度 - ±2 電源關閉靜態操作下 ) 5 amp Proof Test 4 ±2, 85 ~ 9%RH, 96hr (96 小時, 溫度 :4 ±2, 濕度 :85~9%RH 電源關閉靜態操作下 ), 2 6 Vibration Test Total fixed amplitude :.5 mm ( 完全固定輻射 :.5mm) Vibration Frequency : ~ 55 Hz ( 震動頻率 :~55 Hz) One cycle 6 seconds to 3 directions of X, Y, Z for each 5 minutes ( 每一個循環 X,Y,Z 軸方向各做 6 秒, 連續 做 5 次, 共計 5 分鐘 ) 7 Shock Test To be measured after dropping from 6cm high on the concrete surface in packing state. ( 包裝材從 6 公分高的地方向地面落下 ) ropping method comer dropping ( 角落落下方式 ) A comer:once Edge dropping ( 側邊落下 ), C, edge : once 3 Face dropping ( 表面落下 ) E, F, G face : once Note :No dew condensation to be observed. ( 不要在 " 水氣凝結點 " 下觀察 ) Note 2:The function test shall be conducted after 4 hours storage at the normal Temperature and humidity after removed from the test chamber ( 從實驗室移出後, 放在一般常溫 ( 溫度 :25, 濕度 :45%RH), 且四小時後通電流或電壓, 看它是否能正常動作 ) Note 3:Vibration test will be conducted to the product itself without putting it in a container. ( 在震動測試下, 產品本身不需容器即能自行傳導 ) Ver /9

16 SCS64AJEW 9. Reliability Test ( 測試條件 ) Wide Temperature ( 廣溫 ) No change no display and in operation under the following text condition. ( 在不改變原先顯示下進行以下測試操作 ) Conditions : Unless otherwise specified, test will be conducted under the following condition. Temperature : 2±5 Humidity: 4±5%RH Tests will be not conducted under functioning state. ( 條件 : 除非其他特殊情況, 否則測試將以溫度 :2±5, 濕度 :4±5%RH 為主 ) NO Parameter Conditions Notes High Temperature Operating 7 ±2, 96 hrs (operation state) (96 小時, 溫度 7 ±2 電源開啟的操作情況下 ) 2 Low Temperature -2 ±2, 96 hrs (operation state) Operating (96 小時, 溫度 -2 ±2 電源開啟的操作情況下 ) 3 High Temperature 8 ±2, 96 hrs 2 Storage (96 小時, 溫度 8 ±2 電源關閉靜態操作下 ) 4 Low Temperature -3 ±2, 96 hrs, 2 Storage (96 小時, 溫度 -3 ±2 電源關閉靜態操作下 ) 5 amp Proof Test 4 ±2, 85 ~ 9%RH, 96hr (96 小時, 溫度 :4 ±2, 濕度 :85~9%RH 電源關閉靜態操作下 ), 2 6 Vibration Test Total fixed amplitude :.5 mm ( 完全固定輻射 :.5mm) Vibration Frequency : ~ 55 Hz ( 震動頻率 :~55 Hz) One cycle 6 seconds to 3 directions of X, Y, Z for each 5 minutes ( 每一個循環 X,Y,Z 軸方向各做 6 秒, 連續 做 5 次, 共計 5 分鐘 ) 7 Shock Test To be measured after dropping from 6cm high on the concrete surface in packing state. ( 包裝材從 6 公分高的地方向地面落下 ) ropping method comer dropping ( 角落落下方式 ) A comer:once Edge dropping ( 側邊落下 ), C, edge : once 3 Face dropping ( 表面落下 ) E, F, G face : once Note :No dew condensation to be observed. ( 不要在 " 水氣凝結點 " 下觀察 ) Note 2:The function test shall be conducted after 4 hours storage at the normal Temperature and humidity after removed from the test chamber ( 從實驗室移出後, 放在一般常溫 ( 溫度 :25, 濕度 :45%RH), 且四小時後通電流或電壓, 看它是否能正常動作 ) Note 3:Vibration test will be conducted to the product itself without putting it in a container. ( 在震動測試下, 產品本身不需容器即能自行傳導 ) Ver /9

17 SCS64AJEW 2. Precautions Against Product Handling [ 產品使用注意事項 ]: The following precautions will guide you in handling our product correctly. [ 下列警戒引導正確地使用產品 ] 2. Care of the LC module against static electricity discharge. [LC 模組靜電注意事項 ] 2.. When working with the module, be sure to ground your body and any electrical equipment you may be using. We strongly recommend the use of anti static mats (made of rubber), to protect work tables against the hazards of electrical shock. [ 操作模組時, 避免操作者身體接地及任何造成靜電的設備同時使用, 強烈建議 ( 橡膠製 ) 抗靜電墊的使用, 以免工作台面遭受到電氣干擾 ] 2..2 Slowly and carefully remove the protective film from the LC module, since this operation can generate static electricity. [ 緩慢小心地移除 LC 模組上的保護膜, 以防靜電產生 ] 2..3 Avoid the use of work clothing made of synthetic fibers. We recommend cotton clothing or other conductivity-treated fibers. [ 避免穿著人造合成的工作服, 建議棉質或是有傳導性的纖維質料 ] 2.2 Liquid crystal display devices (LC devices) [ 液晶螢幕顯示器的組成 ] 2.2. The polarizer adhering to the surface of the LC is made of a soft material. Guard against scratching it. [ 偏光板是軟性原料製成, 請勿刮傷 ] The LC device panel used in the LCM is made of plate glass. Avoid any strong mechanical shock. Should the glass break handle it with care. [ 模組使用的玻璃為平面玻璃, 避免任何強烈的機械撞擊, 且觸碰時請小心 ] 2.3 When the LC module alone must be stored form long periods of time [ 當 LC 模組須長時間存放時 ] 2.3. Protect the modules from excessive external forces. [ 避免外力壓迫 ] Protect the modules from high temperature and humidity. [ 避免處於高溫高濕下 ] Keep the modules out of direct sunlight or direct exposure to ultraviolet rays. [ 遠離陽光曝曬或直接曝露在紫外線下 ] 2.4 Use the module with a power supply that is equipped with an overcurrent protector circuit, since the module is not provided with this protective feature. [ 因為模組本身沒有防護, 所以模組的供應器應配有過高電流的保護迴路 ] 2.5 o not ingest the LC fluid itself should it leak out of a damaged LC module. Should hands or clothing come in contact with LC fluid, wash immediately with soap. [LC 破裂液晶外漏時, 切勿食下液晶 ; 若手或衣服接觸到液晶, 請立刻用肥皂清洗 ] 2.6 Conductivity is not guaranteed for models that use metal holders where solder connections between the metal holder and the PC are not used. Please contact us to discuss appropriate ways to assure conductivity. [ 當金屬框並沒焊接於 PC 板上時, 無法保證使用金屬框是具有傳導性, 請連絡我們商討適當方式傳導 ] 2.7 For models which use CCFL [CCFL 的模組 ]: 2.7. High voltage of V or greater is applied to the CCFL cable connector area. [CCFL 排線連接器用於 V 以上的高電壓 ] Protect CCFL cables from rubbing against the unit and thus causing the wire jacket to become worn. [CCFL 排線必須有保護 CCFL 與模組磨擦, 以防 CCFL 外殼受到損害 ] The use of CCFLs for extended periods of time at low temperatures will significantly shorten their service life. [ 長時間低溫使用 CCFL 會明顯縮減其使用壽命 ] Ver /9

18 SCS64AJEW 2.8 For models which use touch panels [ 觸控式面板模組 ]: 2.8. o not stack up modules since they can be damaged by components on neighboring modules. [ 勿堆疊模組以防損壞 ] o not place heavy objects on top of the product. This could cause glass breakage. [ 勿將重物放置在產品上, 會導致玻璃破損 ] 2.9 For models which use COG & TA [COG 及 TA 模組 ]: 2.9. The mechanical strength of the product is low since the IC chip is faces out unprotected from the rear. e sure to protect the rear of the IC chip from external forces. [ 由於 IC 晶片表面無防護, 所以抗壓力有限, 須加強保護以防外力 ] Given the fact that the rear of the IC chip is left exposed, in order to protect the unit from electrical damage, avoid installation configurations in which the rear of the IC chip runs the risk of making any electrical contact. [ 勿暴露 IC 晶片以防電氣干擾, 且避免安裝 IC 時有任何電子接觸 ] 2. Models which use flexible cable, heat seal, or TA [ 加有軟排線 熱封條或 TA 的模組 ]: 2.. In order to maintain reliability, do not touch or hold by the connector area. [ 以維持產品信賴度, 請勿觸碰或握住連接器 ] 2..2 Avoid any bending, pulling, or other excessive force, which can result in broken connections. [ 避免彎曲 拉扯或過度力量, 會造成連接器損壞 ] 2. In case of acrylic plate is attached to front side of LC panel, cloudiness (very small cracks) can occur on acrylic plate, being influenced by some components generated from polarizer film. Please check and evaluate those acrylic materials carefully before use. [ 貼在 LC 玻璃前面的壓克力板若有模糊情況 ( 微小裂縫 ), 即會影響偏光板 ; 使用前請仔細確認壓克力材質 ] 2.2 In case of buffer material such as cushion/gasket is assembled into LC module, it may have an adverse effect on connecting parts (LC panel-tcp/ HEAT SEAL/ FPC, PC-TCP/HEAT SEAL/FPC, TCP-HEAT SEAL, TCP-FPC, HEAT SEAL-FPC) depending on its materials. Please check and evaluate these materials carefully before use. [ 緩衝原料像是減震墊 / 襯墊, 或許會對連接器 (LC panel-tcp/ HEAT SEAL/ FPC, PC-TCP/HEAT SEAL/FPC, TCP-HEAT SEAL, TCP-FPC, HEAT SEAL-FPC) 造成反效果, 使用前請仔細確認材料 ] 2. Warranty [ 保證 ]: This product has been manufactured to your company s specifications as a part for use in your company s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in medical devices, nuclear power control equipment, aerospace equipment, fire and security systems, or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. If the product is to be used in any of the above applications, we will need to enter into a separate product liability agreement. [ 此產品的製造是依照客戶的規格, 被使用於客戶的一般電子產品上, 保證產品製作根據出貨的規格, 若產品的使用不是在一般電子設備, 而組裝於下列產品上則無法受理 ( 如醫療產品 核心電源控制設備 航空設備 防火及保全系統, 或任何相關儀器會直接影響人類生命等 ), 若模組使用於上述的儀器, 則需商討各別產品責任義務的協定 ] Ver /9

19 SCS64AJEW 2. We cannot accept responsibility for any defect, which may arise after the application of strong external force to the product. [ 不受理因強大外力衝擊造成產品的缺陷 ] 2.2 We cannot accept responsibility for any defect, which may arise from additional manufacturing of the product (including disassembly and reassembly), after product delivery. [ 不受理產品出貨後, 因額外加工 ( 包含拆裝及重新封包 ) 造成的缺陷 ] 2.3 We cannot accept responsibility for any defect, which may arise due to the application of static electricity after the product, has passed your company s acceptance inspection procedures. [ 不受理通過貴公司檢驗流程後, 由於靜電造成產品的缺陷 ] 2.4 We cannot accept responsibility for intellectual property of a third party, which may arise through the application of our product to your assembly with exception to those issues relating directly to the structure or method of manufacturing of our product. [ 不受理因在客戶產品生產線端所產生的第三人智慧財產權責任, 除非與我司生產製造方法有直接關係的問題 ] 2.5 When the product is in CCFL models, CCFL service life and brightness will vary according to the performance of the inverter used, leaks, etc. We cannot accept responsibility for product performance, reliability, or defect, which may arise. [ 產品是 CCFL 模組時,CCFL 的壽命及亮度將取決於連接器的性能 漏電量等 ; 無法受理因 CCFL 造成產品性能的缺陷 ] 2.6 SEC will not be held responsible for any quality guarantee issue for defect products longer than (one) year from SEC production which ever comes later. [ 出廠超過一年的瑕疵品, 任何品質擔保則不受理 ] Ver /9