穨C-7DXR-0.21.doc

Transcription

1 DECLARATION OF CONFORMITY Per FCC Part 2 Section (a) Responsible Party Name: G.B.T. INC. hereby declare s that the product Address: Valley Blvd., Suite#A LA Puent, CA Phone/Fax No: (818) / (818) Product Name: Mother Board Model Number: Conforms to the following specifications: FCC Part 15, Subpart B, Section (a) and Section (a), Class B Digital Device Supplementary Information: GA- 7DXR This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation. Representative Person's Name: Signature: ERIC LU Eric Lu Date: Mar.23, 2001 FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harm ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Move the equipment away from the receiver -Plug the equipment into an outlet on a circuit different from that to which the receiver is connected -Consult the dealer or an experienced radio/television technician for additional suggestions You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment. This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.

2 Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-7DXR is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN Limits and methods of measurement EN * Disturbances in supply systems caused of radio disturbance characteristics of EN by household appliances and similar industrial, scientific and medical (ISM electrical equipment Harmonics high frequency equipment EN55013 Limits and methods of measurement EN * Disturbances in supply systems caused of radio disturbance characteristics of EN by household appliances and similar broadcast receivers and associated electrical equipment Voltage fluctuations equipment EN Limits and methods of measurement EN Generic emission standard Part 1: of radio disturbance characteristics of Residual, commercial and light industry household electrical appliances, portable tools and similar electrical EN Generic immunity standard Part 1: apparatus Residual, commercial and light industry EN Limits and methods of measurement EN Generic emission standard Part 2: of radio disturbance characteristics of Industrial environment fluorescent lamps and luminaries EN Immunity from radio interference of EN Generic immunity standard Part 2: broadcast receivers and associated Industrial environment equipment EN Limits and methods of measurement ENV Immunity requirements for household of radio disturbance characteristics of appliances tools and similar apparatus information technology equipment DIN VDE 0855 Cabled distribution systems; Equipment EN EMC requirements for uninterruptible part 10 for receiving and/or distribution from power systems (UPS) part 12 sound and television signals CE marking (EC conformity marking) The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC EN Safety requirements for mains operated EN Safety for information technology equipment electronic and related apparatus for including electrical business equipment household and similar general use EN Safety of household and similar EN General and Safety requirements for electrical appliances uninterruptible power systems (UPS) Manufacturer/Importer Signature : (Stamp) Date : Mar. 23, 2001 Name : Rex Lin Rex Lin

3 7DXR AMD Athlon TM /Duron TM Socket A AMD Athlon TM /Duron TM Socket A REV 0.2 First Edition R C

4

5 1) 2) 3) 4) 5) 6) Suspend to RAM Dual BIOS STR Dual BIOS 7) Four Speaker SPDIF Four Speaker SPDIF TM EasyTuneIII TM EasyTuneIII TM 9) Raid Raid 10) BIOS BIOS 11) 12)

6 P.1 P.2 P.3 7DXR P.5 P.6 P.15 P.38 P.39 Suspend to RAM P.40 BIOS(Dual BIOS) P.46 Four Speaker SPDIF TM P.59 EasyTuneIII TM P.60 Raid P.61 BIOS P.82 / P.113 P.114

7 7DXR 0.2 7DXR Mar

8 7DXR (TUCD) 7DXR 2

9 7DXR ATX 30.5 x 24.5 AMD Athlon TM /Duron TM (K7) Socket A 256K/64K 600MHz ~ 1GHz 7DX AMD 761 Memory/PCI/AGP VT82C686B ( I/O ) ICS /266 MHz DDR bus speeds CLK_SW DIP Switch 95/100/106/114/120 /133/140/150MHz BIOS 1MHz pin DDR DIMM PC1600 DDR PC2100 DDR SDRAM 3GB DRAM 2.5V DDR SDRAM 72 ECC DIMM I/O VT82C686B IDE 1 AGP Pro 4 /2 (1.5V/3.3V) 5 32-bit PCI Bus ( 33MHz PCI 2.2 ) 1 AMR (Audio Modem Riser) IDE 1 IDE 2 PIO mode 3, 4 UDMA 33 / ATA 66 / ATA100 IDE & ATAPI CD-ROM IDE 3 IDE 4 Raid Ultra ATA100 Ultra ATA66 Ultra ATA33 EIDE 4 IDE bus master IDE 8 ATAPI 1 (360K 720K 1.2M 1.44M 2.88M bytes) 1 Normal/EPP/ECP 2 (COM A COM B) 4 USB 1 ( IR ) 3

10 PS/2 BIOS / / Creative CT5880 Line In/Line Out/Mic In/AUX In( ) /CD In/TEL( )/Game Port /Four Speaker SPDIF PS/2 PS/2 AWARD BIOS 2M bit BIOS (Dual BIOS) / USB / STR 5 STR EasyTuneIII 4

11 7DXR 7DXR PS/2 PS2_STR (PS2_ STR_EN) RUSB_ON (J6) PWR_FAN CPU_FAN RAM_OV USB1 COM A GUARDIAN (JP6) ATX POWER Socket A CPU STR_EN DIMM_LED RAM_LED (J30) COM B Game & Audio CDIN AUXIN LPT VCORE_OV NB_FAN (CHIP FAN) (J21) SYS_FAN1 7DXR AMD 761 SMB IDE1 IDE2 FDD AMR AMR_EN1 AGP_12V (J40) DDR1 DDR2 DDR3 AGP_PRO CODEC PCI1 CLK_SW S_IRQ VT82C686B SW2 TELE AMR_EN2 Creative CT5880 SYS_FAN2 PCI2 PCI3 PCI4 PCI5 WOR WOL J20 J19 PIDE_EN (JP52) PDC USB2 AGP_OV F_PANEL IDE4 IDE3 BAT1 BZ1 BUZ_EN IR RAID_EN (JP54) Backup BIOS Main BIOS CLR_CMOS FUSB_ON (J8) BIOS_WP 5

12 ( RAM) ATX PCB 6

13 7DXR 1 Jumper 2 (CPU) BIOS

14 DIP switch CLK_SW 95MHz~150MHz J19 & J20 100MHz 133MHz ( ) CLK_SW O ON X OFF FREQ. SW1 SW2 SW3 SW4 SW5 SW6 CPU PCI AGP FS0 FS1 FS2 FS3 FS X O O O O X ( ) O X O O O X O X O X O X O X O O X X X X X O X X O O O O O O O X X X X O X X X X X O J19 & J20 ( ) 1 1 J20 J MHz ( ) 133 MHz 66 MHz J19 J20 CLK Speed MHz ( ) MHz MHz 8

15 7DXR SW2 O ON X OFF Ratio Auto ( ) X X X X O 5X O O X O X 5.5X X O X O X 6X O X X O X 6.5X X X X O X 7X O O O X X 7.5X X O O X X 8X O X O X X 8.5X X X O X X 9X O O X X X 9.5X X O X X X 10X O X X X X 10.5X X X X X X 11X O O O O X 11.5X X O O O X 12X O X O O X 12.5X X X O O X 9

16 (CPU) ( ) 10

17 7DXR AMD AMD ( )

18 3 (DIMM) BIOS DIMM Registered DDR DIMM Devices used on DIMM 64 Mbit (4Mx4x4 banks) 64 Mbit (2Mx8x4 banks) 64 Mbit (1Mx16x4 banks) 128 Mbit (8Mx4x4 banks) 128 Mbit (4Mx8x4 banks) 128 Mbit (2Mx16x4 banks) 256 Mbit (16Mx4x4 banks) 256 Mbit (8Mx8x4 banks) 256 Mbit (4Mx16x4 banks) 512 Mbit (16Mx8x4 banks) 512 Mbit (8Mx16x4 banks) 1 DIMM x64/x72 2 DIMMs x64/x72 3 DIMMs x64/x MBytes 512 MBytes 768 MBytes 128 MBytes 256 MBytes 384 MBytes 64 MBytes 128 MBytes 192 MBytes 512 MBytes 1 GBytes 1.5 GBytes 256 MBytes 512 MBytes 768 MBytes 128 MBytes 256 MBytes 384 MBytes 1 GBytes 2 GBytes 3 GBytes 512 MBytes 1 GBytes 1.5 GBytes 256 MBytes 512 MBytes 768 MBytes 1 GBytes 2 GBytes 3 GBytes 512 MBytes 1 GBytes 1.5 GBytes 12

19 7DXR Unbuffered DDR DIMM Devices used on DIMM 64 Mbit (2Mx8x4 banks) 64 Mbit (1Mx16x4 banks) 128 Mbit (4Mx8x4 banks) 128 Mbit (2Mx16x4 banks) 256 Mbit (8Mx8x4 banks) 256 Mbit (4Mx16x4 banks) 512 Mbit (16Mx8x4 banks) 512 Mbit (8Mx16x4 banks) 1 DIMM x64/x72 2 DIMMs x64/x72 3 DIMMs x64/x MBytes 256 MBytes 384 MBytes 64 MBytes 128 MBytes 192 MBytes 256 MBytes 512 MBytes 768 MBytes 128 MBytes 256 MBytes 384 MBytes 512 MBytes 1 GBytes 1.5 GBytes 256 MBytes 512 MBytes 768 MBytes 1 GBytes 2 GBytes 3 GBytes 512 MBytes 1 GBytes 1.5 GBytes 13

20 DDR DIMM DIMM 3. DIMM DIMM DDR DDR(Double Data Rate) PC SDRAM SDRAM DDR OEM DDR SDRAM SDRAM DDR SDRAM DDR 2.1GB/s DDR DRAM PC SDRAM 3.3 volts DDR 2.5 volts DDR 14

21 7DXR P.17 ATX Power P.17 AUXIN ( ) [ ] P.22 AGP_OV (AGP 4X ) P.28 AGP_12V (J40) (AGP_Pro ) P.27 CDIN ( ) P.21 CPU_FAN ( ) P.25 Floppy Port ( ) P.19 IR ( ) P.27 NB_FAN (CHIP FAN) (J21) ( ) P.28 PWR_FAN ( ) P.24 PS/2 PS/2 P.18 RAM_LED (J30) / DIMM LED (RAM_LED(J30) ) P.26 ( ) RAM_OV ( ) P.30 SYS_FAN 1( 1 ) P.24 SYS_FAN 2( 2 ) P.25 SMB (SMBUS ) [ ] P.23 TELE ( ) [ ] P.22 USB1 ( ) P.18 USB2 ( ) P.19 VCORE_OV ( ) [ ] P.29 WOR ( ) P.23 WOL ( ) P.26 A/ B/ P.17 P.20 IDE / IDE P.20 IDE / IDE (Raid/ATA100) P.21 P.31 AMR_EN1 & AMR_EN2 ( / ) [ ] P.35 BAT 1 ( ) P.36 BIOS_WP (BIOS ) [ ] P.33 BUZ_EN ( ) [ ] P.32 CLR_CMOS ( CMOS ) P.32 F_PANEL ( ) [2x11Pins ] P.31 15

22 FUSB_ON (J8) ( ) P.34 GUARDIAN (JP6) ( ) P.34 PIDE_EN (JP52) (Promise ) P.35 PS2_STR (PS2_STR_EN) ( PS/2 / STR ) P.37 RUSB_ON (J6) ( ) P.33 RAID_EN (JP54) (Raid/ATA100 ) P.36 STR_EN (STR ) P.37 16

23 7DXR ATX Power ,5,7,13, ,2,11 3.3V 4,6,19,20 +5V V 12-12V 18-5V 8 9 5V SB (Stand by +5V) 14 AC (110/220V) ATX ATX AC (110/220V) A/ B/ A B 17

24 PS/2 PS/2 PS/2 PS/ PS/2 6 4 PS/2 PS/2 USB USB USB USB USB ZIP USB. USB 18

25 7DXR USB USB USB USB Floppy Port B IC B IC 19

26 (Line Out1) / (Line In / Line Out 2) Line Out 1 Line Out SPDIF ( AC3 ) Line Out SPDIF Out ( 56 ) Line In Line Creative Four Speaker ( 53 ) Line In Line Out 2 Line Out 1 Line In IDE IDE 1 IDE 2 20

27 7DXR IDE / IDE (Raid/ATA100) IDE 4 IDE 3 CDIN

28 AUXIN ( ) TELE ( )

29 7DXR WOR SMB SMBUS ( ) V 23

30 SYS_FAN V 3 AGP PCI PWR_FAN V 3 ATX 24

31 7DXR CPU_FAN V 3 SYS_FAN V 3 AGP PCI 25

32 WOL V 2 3 RAM_LED (J30) / DIMM_LED (RAM_LED(J30) ) V (AC110/220V) 26

33 7DXR IR V AGP_12V (J40) AGP_Pro V V AGP Pro ( ) AGP Pro 27

34 NB_FAN (CHIP FAN) (J21) V AGP_OV AGP 4X ON 1 2 SW1 SW2 1.5V ( ) OFF OFF 1.6V ON OFF 1.7V OFF ON 28

35 7DXR VCORE_OV ( ) ON O:ON, X:OFF Auto X X X X X O 1.5V O X X X O X 1.525V X O X X O X 1.55V O O X X O X 1.575V X X O X O X 1.6V O X O X O X 1.625V X O O X O X 1.65V O O O X O X 1.675V X X X O O X 1.7V O X X O O X 1.725V X O X O O X 1.75V O O X O O X 1.755V X X O O O X 1.8V O X O O O X 1.825V X O O O O X 1.85V O O O O O X 29

36 RAM_OV ON 1 2 O:ON, X:OFF SW1 SW2 2.5V ( ) OFF OFF 2.6V ON OFF 2.7V OFF ON DDR 30

37 7DXR F_PANEL (2x11Pins ) GN HD S P K RE GD P P P+ PW GN (Green Switch) Open: Normal Operation Close: Entering Green Mode GD (Green LED) Pin 1: anode(+) Pin 2: LED cathode( ) HD (IDE Hard Disk Active LED) SPKR (Speaker Connector) RE (Reset Switch) P+P P (Power LED) PW (Soft Power Connector) Pin 1: LED anode(+) Pin 2: LED cathode( ) Pin 1: VCC(+) +5v Pin 2- Pin 3: NC Pin 4: Data( ) Open: Normal Operation Close: Reset Hardware System Pin 1: LED anode(+) Pin 2: LED cathode( ) Pin 3: LED cathode( ) Open: Normal Operation Close: Power On/Off / 31

38 BUZ_EN ( ) CLR_CMOS CMOS 1 1 ( ) CMOS 1-2 CMOS 2-3 ( ) Jumper CMOS 32

39 7DXR BIOS_WP BIOS ( ) 1 1 ( ) ( ) BIOS_WP Pin2-3 RUSB_ON (J6) 1 1 ( ) ( ) BIOS USB Dev Wakeup from S3~S5 RUSB_ON (J6) STR_EN *( <Del> BIOS POWER MANAGEMENT SETUP USB Dev Wakeup from S3~S5 Enabled ESC SAVE & EXIT SETUP ) 33

40 FUSB_ON (J8) 1 1 ( ) ( ) BIOS USB Dev Wakeup from S3~S5 FUSB_ON (J8) STR_EN *( <Del> BIOS POWER MANAGEMENT SETUP USB Dev Wakeup from S3~S5 Enabled ESC SAVE & EXIT SETUP ) GUARDIAN (JP6) 1 1 ( ) 1-2 ( ) 2-3 CPU_FAN 34

41 7DXR AMR_EN1 & AMR_EN2 / ( ) 1 AMR_EN1 1 AMR_EN2 AMR_EN1 AMR_EN2 Primary CODEC Primary / ( ) Secondary ( ) 7DXR (CT5880) Modem Riser Primary AMR_EN1 & AMR_EN2 Jumper 7DXR 7DXR AMR_EN1 & AMR_EN2 1-2 Audio Modem Riser Primary AMR_EN1 & AMR_EN2 1-2 AMR_EN1 & AMR_EN2 2-3 (CODEC ) Modem Riser Secondary AMR_EN1 & AMR_EN2 2-3 PIDE_EN (JP52) Promise 1 1 ( ) 1-2 Promise ( ) 2-3 Promise 35

42 RAID_EN (JP54) Raid/ATA ATA 100 ( ) Raid 1-2 Raid 2-3 ATA 100 ( ) Raid IDE3 IDE4 PDIE_EN (JP52) BAT1 + 36

43 7DXR STR_EN STR 1 1 ( ) ( ) PS2_STR (PS2_STR_EN) PS/2 / STR 1 1 ( ) 1-2 PS/2 / STR ( ) 2-3 PS/2 / STR SRT_EN 37

44 7DXR AMD K7 Athlon TM 1333MHz (128x1) MB PC266 DDR RAM (SAMSUNG K4H280838B-TCB0) CPU 384 KB (Althon) GA-GF2000 DDR (32MB) Promise RAID0 (IBM DTLA GB x 2) Windows SP1 + DirectX x 768 x 64k x 75Hz TUCD 1.7 Processor AMD Althon TM 1333MHz (266x5) Winbench99 CPU mark FPU Winmark Business Disk Winmark Hi-End Disk Winmark Business Graphics Winmark Hi-End Graphics Winmark Winstone 2001 Business Winstone Content Creative Winstone

45 7DXR AMD-K7 TM CPUCLK (100/133MHz) AGP 2X/4X AGPCLK (66MHz) AMD 761 System Bus 100/133MHz 100/133MHz 2.5V DDR SDRAM HCLK (100/133MHz) NPCLK (33MHz) PCI Bus 33MHz AGPCLK (66MHz) 33MHz MHz 48MHz CT5880 VT82C 686B 5 PCI Option AC97 CODEC AC -Link AMR PS/2 Floppy LPT Port Game Port COM Ports ATA66/100 IDE Channels 4 USB Ports PCI (33MHz) PDC 20265R AGPCLK (66MHz) PCI (33MHz) 48MHz MHz 33MHz ICS HCLK (100/133MHz) NPCLK (33MHz) AGPCLK (66MHz) CPUCLK (100/133MHz) 39

46 Suspend To RAM Suspend to RAM A.1 STR STR Windows 98 ACPI STR STR(S3) STR STR A.2 STR STR 1 STR Windows 98 ACPI Windows 98 A. Windows 98 B. Window D:\setup enter C. ( D ) 40

47 7DXR 2 STR STR_EN Pin ( ) 3 <Del> BIOS POWER MANAGEMENT SETUP ACPI Sleep Type S3/STR ESC SAVE & EXIT SETUP STR 41

48 A.3 STR? 1. Windows Suspend to RAM A. Windows98 B. 42

49 7DXR 2. STR A. B. 43

50 C. Suspend to RAM D. STR A.4 STR? PS/2 3. PS/ USB 44

51 7DXR A.5 1. STR A. ATX ATX 2.01 ( 720 5V Stand-By ) B. DDR SDRAM DDR-200 DDR

52 BIOS(Dual BIOS) A. BIOS (Dual BIOS)? BIOS BIOS BIOS(Main BIOS) (Backup BIOS) BIOS BIOS BIOS B. BIOS a. Award Modular BIOS v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. xxx xxx Check System Health OK, AMD-Athlon(tm)-650MHz (100x6.5) Check NVRAM Wait Press F1 to enter Dual BIOS Utility. Press ESC to quit F1 BIOS ( C ) American Megatrends Inc., KT133-7ZX001-F 46

53 7DXR b. AWARD Dual BIOS Flash ROM Dual BIOS Utility V6.60.g.01K (C) 1999, Gigabyte Technology Co., LTD. Wide Range Protection Halt On BIOS Defects Auto Recovery Boot From BIOS Recovery :Disabled :Disabled :Enabled :Main BIOS :Main to Backup F3: Load Default F5: Start BIOS Recovery F7: Save And Restart F9: Exit Without Saving Use <Space> key to toggle setup C. Dual BIOS Wide Range Protection: Disabled( ), Enabled 1: BIOS, Failure ( :Update ESCD Failure, Checksum Error Reset), Wide Range Protection Enabled, BIOS 2: ( :SCSI, ) ROM BIOS,,, ROM BIOS, BIOS, BIOS Halt On BIOS Defects : Disabled( ), Enabled Halt On BIOS Defects Enabled, CHECKSUM ERROR MAIN BIOS IS WIDE RANGE PROTECTION ERROR, ;, : Auto Recovery :Disabled <or the other key to continue.> Auto Recovery :Enabled <or the other key to Auto Recover.> 47

54 Auto Recovery : Enabled( ), Disabled BIOS BIOS BIOS Checksum Failure, BIOS Checksum Failure BIOS { BIOS Power Management Setup, ACPI Suspend Type Suspend to RAM, Auto Recovery Enabled } Boot From : Main BIOS( ), Backup BIOS 1: BIOS BIOS 2: BIOS BIOS BIOS,, BIOS Recovery : Main to Backup : BIOS Recovery :Main to Backup Main BIOS Backup BIOS BIOS Recovery :Backup to Main Backup BIOS Main BIOS, D. F3:Load Default ( ) F5:Start BIOS Recovery ( BIOS ) F7:Save And Restart ( ) F9:Exit Without Saving ( Dual BIOS ) Use <Space> Key to toggle setup ( ) 48

55 7DXR DualBIOS TM BIOS BIOS DualBIOS TM ( BIOS) BIOS BIOS BIOS B DualBIOS TM ( BIOS) DualBIOS TM ( BIOS), BIOS, 49

56 I. DualBIOS TM? : BIOS DualBIOS TM, BIOS, BIOS(Main BIOS) (Backup BIOS) BIOS, BIOS BIOS BIOS, BIOS BIOS, BIOS II. DualBIOS TM? : BIOS,, BIOS, BIOS.. 1. BIOS, 2 BIOS :, 3. BIOS, 4. BIOS BIOS,, BIOS,, BIOS, BIOS 50

57 7DXR III. DualBIOS TM? : 1. DualBIOS TM, POST (Power On Self Test), ESCD Update, PnP 2. DualBIOS TM BIOS, BIOS BIOS Checksum, Dual BIOS, Auto Recovery BIOS BIOS, Dual BIOS TM BIOS BIOS 3. Dual BIOS TM, BIOS, BIOS BIOS, BIOS 4. Dual BIOS TM, BIOS BIOS, IV. DualBIOS TM? : 1., Dual BIOS TM, BIOS, BIOS, DualBIOS TM : > BIOS, BIOS, 1> Auto Recovery, BIOS BIOS 2> BIOS, Dual BIOS, BIOS 2. BIOS, DualBIOS TM BIOS, BIOS, BIOS BIOS Checksum BIOS 51

58 BIOS 2., 2 BIOS, 4., Dual BIOS TM Dual BIOS TM, Halt On When BIOS Defects, BIOS,,, Halt On When BIOS Defects, Dual BIOS TM : BIOS, 2 2Mbit BIOS 2 4Mbit BIOS 52

59 7DXR Four Speaker SPDIF Four Speaker A. Four Speaker Creative CT speaker Four speaker Line in Line out 4 B. Four Speaker Microsoft Windows 98 a. Audio Configure 3D Audio b. Two speaker ( ) 53

60 Four Speaker SPDIF c. Four speaker Microsoft Windows Me a. 54

61 7DXR b. c. C. Four Speaker four speaker Microsoft DirectX Creative EAX :Game titles software DVD player MP3 player Microsoft DirectX four speaker 55

62 Four Speaker SPDIF SPDIF A. SPDIF SPDIF AC3 B. SPDIF a. b. 56

63 7DXR c. Creative Sound Blaster PCI128 d. Settings Output Mode 57

64 e. Digital Line Out SPDIF Out Four Speaker SPDIF f. Autosense (mono) (stereo) SPDIF Out Speaker out 58

65 7DXR TM BIOS EasyTuneIII TM DOS BIOS TM TM TM Internet BIOS BIOS Windows TM BIOS 59

66 EasyTuneIII EasyTuneIII TM EasyTuneIII TM EasyTuneIII TM EasyTuneIII TM BIOS Jumpers Switches EasyTuneIII TM EasyTuneIII TM EasyTuneIII TM EasyTuneIII TM 60

67 7DXR Raid RAID? RAID RAID 0 (Striping) For capacity ( ) For sustained data transfers ( ) RAID 0 RAID 0 RAID 1 (Mirroring) For capacity ( ) For sustained data transfers ( ) 61

68 Raid RAID Striping (RAID 0) 1GB 1.2GB (2 x 1GB) Striping 1KB 1024KB Fastbuild BIOS [Desktop] 8KB [Server] [A/V Editing] 64KB 62

69 7DXR Mirroring (RAID 1) Mirroring IDE ATA RAID 1 Mirroring ( ) Mirroring RAID 1 (Mirroring) FastBuild Promise 1GB 2GB 1GB 63

70 Raid FastBuild BIOS - ( ) 1. Promise BIOS FastTrak100 (tm) BIOS Version 1.xx (Build xxxx) (c) Promise Technology, Inc. All Rights Reserved. No array defined... Press <Ctrl-F> to enter FastBuild (tm) Utility Or press <ESC> key to continue booting the system. 1. <Ctrl-F> FastBuild 2. [1] FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [Auto Setup Options Menu] Optimize Array for: Typical Application usage: Performance A/V Editing [ Auto Setup Configuration ] Mode...Stripe Spare Driver 0 Drives used in Array...2 Array Disk Capacity [ Keys Available ] [ ] Up [ ] Down [,, Space] Change Option [ESC] Exit [Ctrl-Y] Save 64

71 7DXR FastTrak Striping Master. 1. [Optimize Array for] [Performance] 2. [Typical Application usage] PC A/V Editing Server Desktop ( ) 3. <Ctrl-Y> FDISK 6. TUCD RAID FastTrak100 [Auto Setup] Mirroring [Auto Setup] [Security] (Mirroring) 1. [Optimize Array for] [Security ] 2. <Ctrl-Y> 3. Do you want the disk image to be duplicated to another? (Yes/No) Y Create and Duplicate N Create Only 4. [N] [Create Only] 5. Array has been created. <Press Any Key to Reboot> 65

72 Raid 6. FDISK 7. / FastTrak100 FastTrak100 [Auto Setup] Mirroring [Auto Setup] [Security] (Mirroring) / FastTrak100 Mirroring (RAID 1) Windows NT 4.0 Windows 2000 FastTrak100 ( IDE3 or IDE4 ) ( IDE1 oride2 Windows NT [Optimize Array for] [Security ] 2. <Ctrl-Y> Do you want the disk image to be duplicated to another? (Yes/No) Y Create and Duplicate N Create Only 3. [Y] [Create and Duplicate] (Source Disk) FastBuild 66

73 7DXR Source Disk Channel:ID Drive Model Capacity (MB) Target Disk Channel:ID Drive Model Capacity (MB) [Please Select A Source Disk] Channel:ID Drive Model Capacity (MB) 1 : Master QUANTUMCR8.4A : Master QUANTUMCR8.4A 8063 [ ] Up [ ] [ESC] Exit [Ctrl-Y] Save [Ctrl-Y] Start to duplicate the image... Do you want to continue? (Yes/No) Y Continue N Abort 6. [Y] [N] 1 7. Array has been created. <Press Any Key to Reboot> 8. TUCD RAID FastTrak100 / 67

74 Raid FastBuild FastBuild Promise FastTrak100 FastTrak100BIOS Promise BIOS FastTrak100 (tm) BIOS Version 1.xx (Build xxxx) (c) Promise Technology, Inc. All Rights Reserved. Scanning IDE drives..... BIOS FastTrak100 (tm) BIOS Version 1.xx (Build xxxx) (c) Promise Technology, Inc. All Rights Reserved. ID MODE SIZE TRACK-MAPPING STATUS 1 * 1*2 Stripe 16126M 611/128/32 Functional Press <Ctrl-F> to enter FastBuild (tm) Utility... Functional ( ) Critical ( ) Mirroring FastBuild Offline ( ) Mirroring / Striping 68

75 7DXR FastBuild <Enter> <Esc> FastBuild FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ Main Menu ] Auto Setup...[ 1 ] View Drive Assignments...[ 2 ] Define Array...[ 3 ] Delete Array...[ 4 ] Rebuild Array...[ 5 ] Controller Configuration...[ 6 ] [ Keys Available ] Press to Select Option [ESC] Exit 70 Promise ( ) 78 Mirroring FastBuild FDISK 69

76 Raid [Auto Setup <1>] <Ctrl-Y> FastBuild FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [Auto Setup Options Menu] Optimize Array for: Typical Application usage: Performance A/V Editing [ Auto Setup Configuration ] Mode...Stripe Spare Drive Count...0 Drives used in Array...2 Array Disk Capacity [ Keys Available ] [ ] Up [ ] Down [,, Space] Change Option [ESC] Exit [Ctrl-Y] Save Optimize Array For ( ) [Optimize Array for] Performance (RAID 0) Security (RAID 1) Performance ( RAID 0 Striping) FastTrak Striping Security ( RAID 1 Mirroring) Mirroring ( ) FastTrak100 Mirroring 70

77 7DXR FastTrak100 PC A/V Editing ( ) Server ( ) Desktop ) 1. [<1> Auto Setup] 2. [<1> Auto Setup] ( ) [Define Array <3>] 71

78 Raid [View Drive Assignments <2>] [Assignment] Free Mirroring (U5 100MB/sec U4 66MB/sec ) FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ View Drive Assignments ] Channel:ID Drive Model Capacity(MB) Assignment Mode 1 : Master QUANTUMCR8.4A 8063 Array 1 U5 1 : Slave QUANTUMCR8.4A 8063 Free U5 2 : Master QUANTUMCR8.4A 8063 Array 1 U5 [ Keys Available ] [ ] Up [ ] Down [ESC] Exit Mode (U=UDMA, P=PIO, D=DMA) 72

79 7DXR [Define Array <3>] FastTrak100 RAID FastTrak100 1 Promise [<1> Auto Setup] FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [Define Array Menu] Array No RAID Mode Total Drv Capacity(MB) Status * Array 1 Stripe Functional Array 2 Array 3 Array 4 [ Keys Available ] Note: * Bootable Array [ ] Up [ ] Down [ESC] Exit <Enter> Select [Space] Change Boot Drive 1. [Define Array ] <Enter> 2. [Define Array Definition] ( ) 1 FastTrak100 Striping ID RAID 1 Mirroring 73

80 Raid 1. [Definition] [Array #] RAID 2. 2 Performance (RAID 0Striping) Security (RAID 1Mirroring) FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ Define Array Definition Menu ] Array No RAID ModeTotal Drv Capacity(MB) Status Array 1 Stripe Functional Stripe Block: 64 KB [ Drive Assignments ] Channel:ID Drive Model Capacity (MB) Assignment 1 : MasterQUANTUMCR8.4A 8063 Y 1 : Slave QUANTUMCR8.4A 8063 N 2 : MasterQUANTUMCR8.4A 8063 Y [ Keys Available ] [ ] Up [ ] Down [ESC] Exit [Space] Select [Ctrl-Y] Save Striping (Stripe Block) RIAD 0 Striping Stripe block (Striping ) ( ) FastTrak100 ( A/V editing ) 64K 1. [Drive Assignments] [ ] Up [ ] Down 2. [Assignable] [Y] 3. <Ctrl-Y> a) Striping [Define Array Menu] <Esc> FastBuild 74

81 7DXR b) Mirroring Mirroring Mirroring Mirroring 1. Mirroring <Ctrl-Y> Do you want the disk image to be duplicated to another? (Yes/No) Y Create and Duplicate N - Create Only 2. [N] [Create Only] 3. Array has been created. <Press Any Key to Reboot> FastTrak100 Mirroring Mirroring BIOS FastTrak100 Mirroring (RAID 1) Windows NT 4.0 Windows 2000 FastTrak100 Windows NT

82 Raid 1. Mirroring <Ctrl-Y> Do you want the disk image to be duplicated to another? (Yes/No) Y - Create and Duplicate N - Create Only 2. [Y] [Create and Duplicate] FastBuild Source Disk Channel:ID Drive Model Capacity (MB) Target Disk Channel:ID Drive Model Capacity (MB) [Please Select A Source Disk] Channel:ID Drive Model Capacity (MB) 1 :Master QUANTUMCR8.4A :Master QUANTUMCR8.4A 8063 [ ] Up [ ] [ESC] Exit [Ctrl-Y] Save <Ctrl-Y> Start to duplicate the image... Do you want to continue? (Yes/No) Y Continue N Abort 5. [Y] [N] 1 6. [Y] Please Wait While Duplicating The Image 10% Complete 7. Mirroring Array has been created. <Press Any Key to Reboot> 76

83 7DXR FastTrak100 PC CMOS FastTrak100 FastTrak [Define Array Menu] ( ) FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ Define Array Menu ] Array No RAID Mode Total Drv Capacity(MB) Status * Array 1 Stripe Functional Note: * Bootable Array [ ] Up [ ] Down [ESC] Exit <Enter> Select [Space] Change Boot Drive 2. [ ] Up [ ] Down * 5. ( ) C: Mirroring Mirroring FastTrak100 DOS 77

84 FastTrak100 Raid FastTrak100 1) FastBuild 2) ( 0 1 ) FastTrak100 Promise FastTrak100 [Delete Array <4> Menu] FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ Delete Array Menu ] Array No RAID Mode Total Drv Capacity(MB) Status Array 1 Stripe Functional Array 2 Mirror Functional Array 3 Array 4 [ Keys Available ] [ ] Up [ ] Down [ESC] Exit [Del] Delete 1. <Del> 2. [View Array Definition] ( ) 78

85 7DXR FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ Define Array Menu ] Array No RAID ModeTotal Drv Capacity(MB) Status Array 1 Stripe Functional Stripe Block: 64 KB [ Drive Assignments ] Channel:ID Drive Model Capacity (MB) Assignment 1 : MasterQUANTUMCR8.4A 8063 Y 2 : MasterQUANTUMCR8.4A 8063 Y 3. <Ctrl-Y> Are you sure you want to delete this array? Press Ctrl-Y to Delete, others to Abort 4. FastBuild [Auto Setup] [Define Array ] Mirroring Mirroring [Rebuild Array <5> Menu] FastTrak BIOS [Rebuild Array ] 1. FastTrak100 BIOS 2. <Ctrl-F> FastBuild 3. [Define Array <3>] 4. ID FastBuild 8. [<5> Rebuild Array ] 79

86 Raid FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ Rebuild Array Menu ] Array No RAID ModeTotal Drv Capacity(MB) Status Array 1 Stripe Functional Array 2 Mirror Critical Array 3 Array 4 [ Keys Available ] [ ] Up [ ] Down [ESC] Exit <Enter> Select 9. Critical 10. <Enter> FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ Rebuild Array Menu ] Array No RAID Mode Total Drv Status Array 2 Mirror 2 Critical Stripe Block: Not Available [ Select Drive for Rebuild ] Channel:ID Drive Model Capacity (MB) 1 : Slave QUANTUM CR8.4A 8063 [ Keys Available ] [ ] Up [ ] Down [ESC] Exit <Enter> Select 11. [Select Drive for Rebuild] 12. <Enter> Mirroring Please Wait While Duplicating The Image 10% Complete

87 7DXR [Controller Configuration <6>] FastTrak100 BIOS ( ) FastTrak100 ( I/O ) FastBuild (tm) Utility 1.xx (c) Promise Technology, Inc. [ Adapter Configuration - Options ] Halt On Error: Enable [ System Resources Configuration ] Channel 1 (IDE1) Interrupt : A I/O Port : FFF0 Channel 2 (IDE2) Interrupt : A I/O Port : FFA8 [ Keys Available ] [,, Space] Change Option [ESC] Exit FastTrak100 BIOS [Adapter Configuration Options] BIOS FastTrak100 FastTrak [System Resources Configuration] FastTrak100 PCI FastTrak100 PCI PCI PnP BIOS 81

88 BIOS BIOS P.84 CMOS P.86 BIOS P.89 P.91 P.95 P.100 PCI P.103 P.105 / P.107 Fail-Safe P.108 Optimized P.109 (Supervisor)/ (User) P.110 SETUP P.111 SETUP P

89 7DXR BIOS Award BIOS CMOS SETUP. CMOS SETUP CMOS CMOS SRAM BIOS POST Power On Self Test Del Award BIOS CMOS SETUP POST Del CMOS SETUP Ctrl Alt Del Reset POST Del CMOS SETUP Esc SETUP Page Up Page Down F1 F2 F3 F4 F5 ( ) F6 Fail-Safe ( ) F7 Optimized ( ) F8 F9 F10 CMOS SETUP SETUP SETUP 83

90 BIOS F1 BIOS CMOS SETUP <Esc> CMOS SETUP,, Enter CMOS Setup Utility-Copyright( C ) Award Software 4Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4PnP/PCI Configurations 4PC Health Status ESC:Quit F10:Save & Exit Setup 4Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving : Select Item 1 Standard CMOS Features ( CMOS ) Advanced BIOS Features ( BIOS ) BIOS... Advanced Chipset features ( ) DRAM Timing ISA Clock... Time, Date, Hard Disk Type 84

91 7DXR Integrated Peripherals ( ) COM Port IRQ LPT Port SPP EPP ECP IDE PIO Mode.. Power Management Setup ( ) GREEN PNP/PCI Configuration ( PCI ) ISA PnP PCI PC Health Status ( ), Frequency/Voltage Control ( / ) Load Fail-Safe Defaults( Fail-Safe ) BIOS CMOS Load Optimized Defaults( Optimized ) Optimized CMOS Set Supervisor Password ( ) SETUP CMOS Set User Password ( ) PC BIOS Save & Exit Setup ( ) SETUP BIOS F10 Exit without Saving ( SETUP ) <ESC> 85

92 BIOS CMOS STANDARD CMOS SETUP IDE CMOS Setup Utility -Copyright( C ) Award Software Standard CMOS Features Date (mm:dd:yy) Wed, Feb Item Help Time (hh:mm:ss) 2 : 31 : 24 Menu Level 4 4IDE Primary Master None 4IDE Primary Slave None Change the 4IDE Secondary Master None Day, month, 4IDE Secondary Slave None Year and century Drive A 1.44M, 3.5 in. Drive B None Floppy 3 Mode Support Disabled Video Halt On Base Memory Size Extended Memory Size Total Memory EGA / VGA All, But Keyboard 640K 63488K 64512K :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Date(mm:dd:yy) ( ) 2 CMOS / / (mm) 1 12 (dd) 1 28/29/30/31 (yy)

93 7DXR Time(hh:mm:ss) ( ) : 00 : 00 RTC IDE Primary Master (Slave) / IDE Secondary Master (Slave) ( / ) IDE 1 IDE 2 CMOS 1 User TYPE CYLS HEADS SECTORS MODE 2 AUTO TYPE MODE AUTO BIOS POST IDE CYLS. HEADS PRECOMP LANDZONE SECTORS Number of cylinders( ). number of heads( ). write precomp. Landing zone. number of sectors( ). NONE <Enter> Drive A / Drive B ( A:/ B: ) None 360K, 5.25 in KB 1.2M, 5.25 in MB 720K, 3.5 in KB 1.44M, 3.5 in MB 2.88M, 3.5 in MB Floppy 3 Mode Support ( 3 Mode ) Disabled Drive A Drive B Both 3 Mode A: 3 Mode B: 3 Mode A: B: 3 Mode 87

94 Video( ) BIOS EGA/VGA CGA 40 CGA 80 MONO EGA, VGA, SVGA, or PGA Color Graphics Adapter 40 Color Graphics Adapter 80 Halt On( ) POST NO Errors All Errors All, But Keyboard All, But Diskette All, But Disk/Key Memory ( ) ) BIOS POST(Power On Self Test) STANDARD CMOS SETUP Base Memory PC 640KB MS-DOS Extended Memory Base Other Memory Module 88

95 7DXR BIOS CMOS Setup Utility -Copyright( C ) Award Software Advanced BIOS Features Virus Warning Disabled Item Help First Boot Device Floppy Second Boot Device IDE-0 Menu Level 4 Third Boot Device CDROM Allows you to RAID/SCSI Boot Order RAID, SCSI choose the VIRUS Floppy Drive Seek Disabled Warning feature BootUp Num-Lock On For IDE Hard disk Password Check Setup Boot sector HDD S.M.A.R.T Capability Disabled Protection. If this Function is enable And someone Attempt to write Data into this area, BIOS will show A warning Message on Screen and alarm beep :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults 3 BIOS First / Second / Third Boot device SCSI/RAID Virus Warning( ) Enabled Disabled ( ) First / Second / Third Boot Device ( / / ) Floppy LS120 IDE-0~IDE3 SCSI/RAID CDROM ZIP LS120 SCSI/RAID ZIP 89

96 BIOS Disabled LAN RAID/SCSI Boot Order RAID, SCSI SCSI, RAID LAN RAID/ATA 100 ( ) PCI SCSI Floppy Drive Seek ( ) PC POST FLOPPY SEEK Enabled Disabled Floppy Seek Floppy Seek ( ) BootUp Num-Lock ( ) On Off ( ) Password Check ( ) System Setup CMOS SETUP CMOS SETUP ( ) SETUP Enter 110 HDD S.M.A.R.T. Capability ( ) Enabled Disabled S.M.A.R.T. S.M.A.R.T. ( ) 90

97 7DXR CMOS Setup Utility -Copyright( C ) Award Software Advanced Chipset Features Top Performance Disabled Item Help AGP Aperture Size 64 AGP Fast Write Enabled Menu Level 4 AGP Mode 4X AGP Always Compensate Enabled SDRAM ECC Setting Disabled DRAM Timing setting by Auto X DRAM PH Limit 8 Cycle X DRAM Idle Limit 8 Cycle X DRAM Trc Timing Value 7 Cycle X DRAM Trp Timing Value 2 Cycle X DRAM Tras Timing Value 5 Cycle X DRAM CAS Latency 2 Cycle X SDRAM Trcd Timing Value 2 Cycle :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults 4 Top Performance ( ) Top Performance Enabled Disabled Enabled AGP Aperture Size 32MB 64MB 128MB 256MB AGP Fast Write Disabled Enabled ( ) Top Performance AGP Aperture Size 32 MB AGP Aperture Size 64 MB ( ) AGP Aperture Size 128 MB AGP Aperture Size 256 MB AGP ( ) 91

98 BIOS AGP Mode (AGP ) 4X 1X/2X AGP 4X ( ) AGP 1X/2X AGP Always Compensate Enabled Disabled AGP Always Compensate ( ) SDRAM ECC Setting Disabled Check Only Correct Error Correct + Scrub DRAM Timing Setting by ( ) SDRAM ECC Setting Check Only SDRAM ECC Setting Correct Error /AGP/PCI SDRAM ECC Setting Correct + Scrub /AGP/PCI Auto Manual DRAM Timing Auto ( ) DRAM Timing Manual ( ) DRAM PH Limit NonPH (Non-page hit requests) PH (Page hit requests) cycle 1 Cycle DRAM PH Limit 1 Cycle 4 Cycle DRAM PH Limit 4 Cycle 8 Cycle DRAM PH Limit 8 Cycle 16 Cycle DRAM PH Limit 16 Cycle DRAM Idle Limit Precharge (Idle Bank) 0 Cycle DRAM Idle Limit 0 Cycle 8 Cycle DRAM Idle Limit 8 Cycle 12 Cycle DRAM Idle Limit 12 Cycle 16 Cycle DRAM Idle Limit 16 Cycle 92

99 7DXR 24 Cycle DRAM Idle Limit 24 Cycle 32 Cycle DRAM Idle Limit 32 Cycle 48 Cycle DRAM Idle Limit 48 Cycle Disabled DRAM Trc Timing Value bank 3 Cycle DRAM Trc Timing Value 3 Cycle 4 Cycle DRAM Trc Timing Value 4 Cycle 5 Cycle DRAM Trc Timing Value 5 Cycle 6 Cycle DRAM Trc Timing Value 6 Cycle 7 Cycle DRAM Trc Timing Value 7 Cycle 8 Cycle DRAM Trc Timing Value 8 Cycle 9 Cycle DRAM Trc Timing Value 9 Cycle 10 Cycle DRAM Trc Timing Value 10 Cycle DRAM Trp Timing Value bank Precharge 1 Cycle DRAM Trp Timing Value 1 Cycle 2 Cycle DRAM Trp Timing Value 2 Cycle 3 Cycle DRAM Trp Timing Value 3 Cycle 4 Cycle DRAM Trp Timing Value 4 Cycle DRAM Tras Timing Value 2 Cycle DRAM Tras Timing Value 2 Cycle 3 Cycle DRAM Tras Timing Value 3 Cycle 4 Cycle DRAM Tras Timing Value 4 Cycle 5 Cycle DRAM Tras Timing Value 5 Cycle 6 Cycle DRAM Tras Timing Value 6 Cycle 7 Cycle DRAM Tras Timing Value 7 Cycle 8 Cycle DRAM Tras Timing Value 8 Cycle 9 Cycle DRAM Tras Timing Value 9 Cycle 93

100 DRAM CAS Latency BIOS 2 Cycle DRAM CAS Latency 2 Cycle 2.5 Cycle DRAM CAS Latency 2.5 Cycle SDRAM Trcd Timing Value 1 Cycle SDRAM Trcd Timing Value 1 Cycle 2 Cycle SDRAM Trcd Timing Value 2 Cycle 3 Cycle SDRAM Trcd Timing Value 3 Cycle 4 Cycle SDRAM Trcd Timing Value 4 Cycle 94

101 7DXR CMOS Setup Utility -Copyright( C ) Award Software Integrated Peripherals OnBoard IDE1 Enabled Item Help OnBoard IDE2 Enabled VGA Boot from AGP Menu Level 4 OnBoard Sound Chip Enabled BIOS Flash Protection Disabled USB Controller 1 Enabled USB Controller 2 Enabled USB Legacy Support Disabled AC97 Audio Auto AC97 Modem Auto Onboard FDD Controller Enabled Onboard Serial Port 1 Auto Onboard Serial Port 2 Auto UART 2 Mode Standard IR Function Duplex Half TX, RX inverting enable No, Yes Onboard Parallel Port 378/IRQ7 Onboard Parallel Mode Normal ECP Mode Use DMA 3 Parallel Port EPP Type EPP1.9 Sound Blaster Disabled SB I/O Base Address 220H SB IRQ Select IRQ 5 SB DMA Select DMA 1 MPU-401 Disabled MPU-401 I/O Address H Game Port ( H) Enabled :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults 5 UART 2 Mode HPSIR ASKIR Onboard Parallel Mode ECP/EPP 95

102 OnBoard IDE1 ( channel PCI IDE ) BIOS Enabled Disabled channel IDE ( ) OnBoard IDE2 ( channel IDE ) Secondary IDE Enabled Disabled channel PCI IDE ( ) VGA Boot from ( ) AGP PCI Slot AGP ( ) PCI Onboard Sound Chip Enabled Disabled Onboard Sound Chip ( ) BIOS Flash Protection (BIOS ) Enabled Disabled BIOS ( ) USB Controller 1 Enabled Disabled USB Controller 1 ( ) USB Controller 2 Enabled Disabled USB Controller 2 ( ) USB Legacy Support Enabled Disabled USB ( USB ) DOS. Win NT4.0 ( ) 96

103 7DXR AC97 Audio Auto Disabled BIOS AC 97 AC 97 AC 97 ( ) AC97 Modem Auto Disabled BIOS AC 97 (AMR ) AC 97 AC 97 ( ) Onboard FDC Controller ( ) Enabled Disabled ( ) Onboard Serial Port 1( 1) Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled BIOS ( ) 1 3F8 1 2F8 1 3E8 1 2E8 1 Onboard Serial Port 2 ( 2) Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled BIOS ( ) 2 3F8 2 2F8 2 3E8 2 2E8 2 UART 2 Mode ( I/O 2 ) ASKIR HPSIR Standard I/O 2 ASKIR I/O 2 HPSIR I/O ( ) 97

104 BIOS IR Function Duplex Half Full TX, RX inverting enable IR ( ) IR No, No No, Yes Yes, No Yes, Yes TX, RX inverting enable No, No TX, RX inverting enable No, Yes ( ) TX, RX inverting enable Yes, No TX, RX inverting enable Yes, Yes Onboard Parallel port ( ) 378/IRQ7 278/IRQ5 3BC/IRQ7 Disabled 378 ( ) 278 3BC Onboard Parallel Mode ( ) EPP ECP EPP/ECP Normal EPP Enhanced Parallel Port ECP Extended Capabilities Port EPP ECP ( ) ECP Mode Use DMA ( DMA ) 1 DMA 1 3 DMA 3 ( ) Parallel Port EPP Type EPP 1.9 EPP 1.7 Parallel Port EPP Type EPP 1.9 ( ) Parallel Port EPP Type EPP 1.7 Sound Blaster Enabled Disabled Sound Blaster ( ) 98

105 7DXR SB I/O Base Address 220H 240H 260H 280H SB I/O Base 220H ( ) SB I/O Base 240H SB I/O Base 260H SB I/O Base 280H SB IRQ Select IRQ 5 / 10 ( 5 ) SB DMA Select DMA 0 / 1 / 2/ 3 ( 1 ) MPU-401 Enabled Disabled MPU-401 MPU-401 ( ) Ps. Force Feedback joystick MPU-401 MPU-401 I/O Address H MPU-401 I/O H ( ) H MPU-401 I/O H H MPU-401 I/O H H MPU-401 I/O H Game Port ( H) Enabled Disabled Game Port ( H) ( ) Game Port ( H) 99

106 BIOS CMOS Setup Utility -Copyright( C ) Award Software Power Management Setup ACPI Sleep Type S1(POS) Item Help Suspend Time Out (Minute) Disabled Soft-Off by PBTN Instant-off Menu Level 4 System after AC Back Off PME Event Wake Up Enabled USB Dev Wakeup from S3-S5 Disabled ModemRingOn/WakeOnLan Enabled MODEM Use IRQ 3 Resume by RTC Alarm Disabled X Date (of Month) Alarm 0 X Time (hh:mm:ss) Alarm IRQ Wakeup Events Press Enter VGA OFF LPT & COM LPT/COM HDD & FDD ON PCI master OFF :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults 6 ACPI Sleep Type (ACPI ) S1 (POS) S3 (STR) ACPI S1 ( ) ACPI S3 Suspend Time Out (Minute) Disabled 30Sec-1 Hour ( ) Soft-off by PBTN ( ) Instant-off Suspend Soft-Off ( ) Soft-Off 100

107 7DXR System After AC Back ( ) Last State Off On Soft PWR button ( ) PME Event Wake Up ( ) Disabled Enabled ( ) USB Dev Wakeup from S3-S5 ( (S3)~ (S5) USB ) Enabled Disabled ( ) ModemRingOn / WakeOnLan ( / ) Disabled Enabled / / ( ) MODEM Use IRQ NA MODEM IRQ 3 MODEM Use IRQ 3 ( ) 4 MODEM Use IRQ 4 5 MODEM Use IRQ 5 7 MODEM Use IRQ 7 9 MODEM Use IRQ 9 10 MODEM Use IRQ MODEM Use IRQ 11 Resume by RTC Alarm ( ) Resume by RTC Alarm Enabled Disabled Enabled ( ) Date ( of Month) Alarm : 0~31 Time ( hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) 101

108 BIOS IRQs Activity Disabled Primary Secondary ( ) IRQ [3-15] Disabled Enabled IRQ[3-15] VGA ( ) ( APM ) OFF ON ( ) LPT & COM ( ) ( APM ) LPT/COM NONE LPT COM ( ) HDD & FDD (, ) ( APM ) ON OFF ( ) PCI master ( APM ) ON OFF PCI PCI ( ) 102

109 7DXR PCI CMOS Setup Utility -Copyright( C ) Award Software PnP/PCI Configurations Reset Configuration Data Disabled Item Help Resources Controlled By Auto (ESCD) Menu Level 4 X IRQ Resources Press Enter INT A Assignment Auto Default is Disabled. INT B Assignment Auto Select Enabled to INT C Assignment Auto reset Extended System INT D Assignment Auto Configuration Data ESCD) when you exit Setup if you have installed a new add-on and the System reconfiguration has caused such a serious conflict that the OS cannot boot Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults 7 PCI Reset Configuration Data ( ) BIOS PnP Enabled Disabled Reset Configuration Data Reset Configuration Data ( ) Resources Controlled by ( ) Manual Auto (ESCD) CMOS SETUP ISA BIOS PnP ( ) 103

110 BIOS IRQ ( ) IRQ PC COM 1(IRQ 4) COM 2(IRQ 3) LPT(IRQ 7) IDE(IRQ 14,15) IRQ 5/9/10/11 DMA BIOS PnP VGA... Reserved PCI Device INT A / B / C / D Assignment PCI PnP ( ) Auto BIOS ( ) 3 INT A / B / C / D Assignment 3 4 INT A / B / C / D Assignment 4 5 INT A / B / C / D Assignment 5 7 INT A / B / C / D Assignment 7 9 INT A / B / C / D Assignment 9 10 INT A / B / C / D Assignment INT A / B / C / D Assignment INT A / B / C / D Assignment INT A / B / C / D Assignment INT A / B / C / D Assignment

111 7DXR CMOS Setup Utility -Copyright( C ) Award Software PC Health Status CPU Warning Temperature Disabled Item Help CPU Fan Warning No System Fan Warning No Menu Level 4 Current CPU Temp. 57 C/134 F Current System Temp. 31 C/87 F CPU Fan Speed 5553 RPM System Fan Speed 0 RPM Vcore 3.10V 3.3V 3.31V 5V 5.10V 12V 12.42V Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults 8 CPU Warning Temperature ( C / F) 60 C / 140 F 60 C / 140 F P.O.S.T. 70 C / 158 F 70 C / 158 F P.O.S.T. 80 C / 176 F 80 C / 176 F P.O.S.T. 90 C / 194 F 90 C / 194 F P.O.S.T. Disabled ( ) 105

112 BIOS CPU Fan Warning ( ) Yes No P.O.S.T. P.O.S.T. ( ) System Fan Warning (System ) Yes No System P.O.S.T. System P.O.S.T. ( ) Current CPU Temp. ( C / F) Current System Temp. ( C / F) System CPU Fan / System Fan Speed (RPM) Voltage (v) Vcore / 3.3V / 5V / 12V Vcore / 3.3V / 5V / 12V 106

113 7DXR / CMOS Setup Utility -Copyright( C ) Award Software Frequency/Voltage Control CPU Vcore Select Default Item Help CPU Frequency Control Disabled CPU Clock 100 Menu Level 4 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults 9 / CPU Vcore Select ( ) 0.025V ( ) CPU Frequency Control ( ) Disabled Enabled ( ) CPU Clock ( ) CPU Frequency Control 107

114 BIOS Fail-Safe CMOS Setup Utility -Copyright( C ) Award Software 4Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4Frequency/Voltage Control Load Fail - Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password 4PnP/PCI Configurations Load Fail-Safe Defaults Save (Y/N)? & Exit N Setup 4PC Health Status ESC:Quit F10:Save & Exit Setup Exit Without Saving : Select Item Load Fail-Safe Defaults 10 Fail-Safe Y Enter BIOS Fail-Safe Defaults Fail-Safe Defaults 108

115 7DXR Optimized CMOS Setup Utility -Copyright( C ) Award Software 4Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password 4PnP/PCI Configurations Load Optimized Defaults Save &(Y/N)? Exit Setup N 4PC Health Status ESC:Quit F10:Save & Exit Setup Exit Without Saving : Select Item Load Optimized Defaults 11 Optimized Y Enter Load Optimized Defaults CMOS 109

116 (Supervisor)/ (User) BIOS Enter CMOS Setup Utility -Copyright( C ) Award Software 4Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup Enter Password: 4PnP/PCI Configurations 4Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup 4PC Health Status ESC:Quit F10:Save & Exit Setup Exit Without Saving : Select Item Change / Set / Disable Password 12 (Supervisor)/ (User) 8 Enter BIOS Enter BIOS PASSWORD DISABLED SUPERVISOR Supervisor Advanced BIOS Features Password Check System User Supervisor Password Check Setup BIOS Supervisor USER User Advanced BIOS Features Password Check System User Supervisor BIOS USER Password BIOS Supervisor 110

117 7DXR SETUP CMOS Setup Utility -Copyright( C ) Award Software 4Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password 4PnP/PCI Configurations SAVE to CMOS and Save EXIT & (Y/N)? Exit Setup Y 4PC Health Status ESC:Quit F10:Save & Exit Setup Exit Without Saving : Select Item Save Data to CMOS 13 SETUP Y Enter RTC CMOS Setup Utility N Esc 111

118 BIOS SETUP CMOS Setup Utility -Copyright( C ) Award Software 4Standard CMOS Features 4Advanced BIOS Features 4Advanced Chipset Features 4Integrated Peripherals 4Power Management Setup 4Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password 4PnP/PCI Configurations Quit Without Saving Save (Y/N)? & Exit N Setup 4PC Health Status ESC:Quit F10:Save & Exit Setup Exit Without Saving : Select Item Abandon all Datas 14 SETUP Y Enter Setup Utility N Esc 112

119 7DXR BIOS Lot / (CPU) (RAM) (Video) (Audio) (HDD) CD-ROM / DVD-ROM (Modem) (Network) AMR / CNR : 113

120 A AMD 761_VIA 686A/B A. AMD AGP Miniport (Win98/SE/ME only) (TUCD) ( ICON) 1. AMD AGP Miniport Driver 2. Next (1) (2) AMD AGP Miniport (4) 3. Finish (3) 114

121 7DXR B: VIA IDE Bus Master (TUCD) ( ICON) 1. VIA IDE Bus Master Driver (1) 2. Next (2) 3. Next 4. Next (3) (4) 5. Next (5) (6) 115

122 6. Finish (7) 116

123 7DXR B Promise PCI Device A. Promise ATA100 (TUCD) ( ICON) 2. Driver Information 1. Promise PCI Device (1) (2) Promise ATA Control Panel 4. System (4) (3) (5) (6) 117

124 Next 11. Next (7) (8) 12. SCSI controllers 13. Next 16.Click Next. 14. Have Disk (9) (10) 15. D:\Other\Promise\ata100\WINME ( D ) (11) 17. Next (12) 118

125 7DXR 18. Next 19. Finish (13) (14) 20. Yes (15) Driver Information 119

126 B. Promise RAID (TUCD) (, ICON) 2. Driver Information 1. Promise PCI Device (1) (2) Promise RAID 3. Control Panel 4. System (4) (3) (5) (6) 120

127 7DXR Next 11. Next (7) (8) 12. SCSI controllers 13. Next 14. Have Disk (9) (10) 16. OK 15. D:\Other\Promise\IdeRAID\win9x -ME ( D ) (11) 17. Next (12) 121

128 18. Next 19. Finish (13) (14) 20. Yes (15) Driver Information 122

129 7DXR C. FastTrak Utilities (TUCD) ( ICON) 2. FastTrak Utilities Installation 1. Promise PCI Device (1) (2) 3. Next (3) (4) 4. Yes 5. Next (5) (6) 123

130 6. Next 7. Next (7) (8) 8. Next 9. Next (9) (10) 10. Next 11. Finish (11) (12) 124

131 7DXR C Creative Sound (TUCD) ( ICON) Audio 1. Creative 5880 Sound Driver 2. OK (1) LAVA! Player 2.5 Creative Sound Blaster PCI128 Software (2) 4. Next 3. Yes (4) (3) 125

132 5. Next 6. (5) (6) 7. Next (7) (8) 8. Finish (9) 126

133 7DXR LAVA! Player (1) 1. Next (2) 2. Yes 3. Next (3) (4) 4. Next (5) (6) 127

134 5. Next 6. Finish (7) (8) 128

135 7DXR D EasyTuneIII (TUCD) ( ICON) Tools 2. EasyTuneIII Ver.3.2g 1. Gigabyte Utilities (1) (2) 4. Next 3. Next (4) (3) 5. Next 6. Next (5) (6) 129

136 7. Finish (7) (8) 130

137 7DXR E BIOS BIOS OS Tools Writer v1.06g 1. Gigabyte Utilities (1) (2) (3) 1. I. Internet BIOS a. "Internet Update" b. "Update New BIOS" ( server 1 in Taiwan" server 2 in Taiwan") d. e. BIOS 131

138 II. Internet BIOS a. "Internet Update" b. "Update New BIOS" c. " "All Files (*.*)" d. BIOS ( : 7DXR.F1) e. III. BIOS "Save Current BIOS" BIOS IV. Flash ROM "About this Flash ROM 2. a. I ( ) BIOS b. II BIOS c. BIOS BIOS II BIOS d. BIOS 132

139 7DXR DOS BIOS BIOS (AMI AWARD) PCB ( ) A DOS format A: /s A. B. 4 COMMAND.COM ( ) ( ) ( ) ( ) ( ) ( ) C. CONFIG.SYS AUTOEXEC.BAT D. BIOS (.zip ) 1. (AMI ) flashxxx.exe (Award ) Awdflash.exe BIOS BIOS 1. DOS DOS awdflash filename.xxx BIOS Enter BIOS Yes "No" BIOS? Yes BIOS reset ( ) BIOS BIOS ( ) Del CMOS SETUP default ( reset ) 133

140 F ACPI Advanced Configuration and Power Interface APM Advanced Power Management AGP Accelerated Graphics Port AMR Audio Modem Riser ACR Advanced Communications Riser BIOS Basic Input / Output System CPU Central Processing Unit CMOS Complementary Metal Oxide Semiconductor CRIMM Continuity RIMM CNR Communication and Networking Riser DMA Direct Memory Access DMI Desktop Management Interface DIMM Dual Inline Memory Module DRM Dual Retention Mechanism DRAM Dynamic Random Access Memory DDR Double Data Rate ECP Extended Capabilities Port ESCD Extended System Configuration Data ECC Error Checking and Correcting EMC Electromagnetic Compatibility EPP Enhanced Parallel Port ESD Electrostatic Discharge FDD Floppy Disk Device FSB Front Side Bus HDD Hard Disk Device IDE Integrated Dual Channel Enhanced IRQ Interrupt Request I/O Input / Output IOAPIC Input Output Advanced Programmable Input Controller ISA Industry Standard Architecture LAN Local Area Network LBA Logical Block Addressing LED Light Emitting Diode MHz Megahertz MIDI Musical Interface Digital Interface MTH Memory Translator Hub MPT Memory Protocol Translator NIC Network Interface Card OS Operating System 134