Microsoft Word - _KOTL-S13015_C1020B217F常规.doc

Size: px

Start display at page:

Download "Microsoft Word - _KOTL-S13015_C1020B217F常规.doc"

瓦季
5 years ago
Views:

1 金龙机电股份有限公司 JINLONG MACHINERY & ELECTRONICS CO., LTD. 产品规格书 PRODUCT SPECIFICATION 客户信息客户名称 / Buyer Name 客户料号 /Buyer s Part No. 客户承认签章 /Buyer s Approval & Signatures 金龙公司文件编号 /Spec No. KOTL-S13015 品名描述 Product Description 扁平振动马达 Coin type vibration motor 型号 /Part No. C1020B217F 送样日期 /Date 设计 /Designed by 审核 /Checked by 批准 /Approved by 张娜 /ZHANG NA 刘琪敏 / LIU QI MIN 邵家声 / SHAO JS

2 规格书内容 / Contents 1. 适用范围 /General Scope of Application 1/8 2. 使用条件 /Operating Conditions 1/8 3. 测定条件 /Conditions of Measurement 1/8 4. 电气性能 /Electrical Characteristics 1/8 5. 机械性能 /Mechanical Characteristics 2/8 6. 耐久性能 /Reliability Test 2/8 7. 要求 /Requirements after Reliability Tests 4/8 8. 使用注意事项 /Cautions for Use 5/8 9. 包装 /Packaging Description 6/8 10. 外形图 /Outline Drawings 7/8 11. 更改记录 /Records of Revisions 8/8

3 说明书 /Specification 编号 /No KOTL-S /8 1. 适用范围 /General Scope of Application 本说明书适用于扁平式永磁直流电机 C1020B217F 系列. This specification applies to coin type permanent-magnetic motors DC model C1020B217F. 2. 使用条件 /Operating Conditions 项目 /Item 额定电压 Rated voltage 使用电压范围 Operating voltage 旋转方向 Rotation 使用环境 Operating environment 保存环境 Storage environment 规格 /Specifications 3.0V DC 2.7~3.3V DC CW (clockwise) or CCW (counter clockwise) -20~60, 常湿 /Ordinary Humidity:65±20%RH -30~70, 常湿 /Ordinary Humidity:65±20%RH 3. 测定条件 /Conditions of Measurement 项目 /Item 温度 Temperature 湿度 Humidity 电源电压 Power supply 规格 /Specification 25±3 65±20% RH 稳压直流电源 3.0V Constant Power supply 3.0V DC. 4. 电气性能 /Electrical Characteristics 项目 /Item 规格 /Specification 条件 /Condition 4-1 额定转速 9000rpm Min Rated speed 额定电压下 4-2 额定电流 At rated voltage. 90mA Max Rated current 起动电流 mA Max 在最小起动电压下起动 Starting current Motor is rotating at minimum 起动电压 V DC Max starting voltage. Starting voltage 在 100V 直流下, 导线和机壳 4-5 绝缘电阻间 10MΩ Min Insulation resistance At DC 100V between lead wire and case. 4-6 端子阻抗 Terminal resistance 31Ω±15%( 单相 single posture) 59Ω±15%( 双相 compose posture) 在 25 下 At 25

4 说明书 /Specification 编号 /No KOTL-S /8 5. 机械性能 /Mechanical Characteristics 项目 /Item 5-1 底盖偏转强度 Bracket Deflection strength 机械噪音 Mechanical noise 规格 /Specification 9.8N 以上 9.8N or more. 小于 50 分贝. A 计权 50dB (A) Max. 在额定电压下 At rated voltage. 背景噪音 : 不大于 28dB. A 计权. Back ground noise 28dB (A) Max mm Motor Test block Foam 6. 耐久性能 / Reliability Tests 项目 /Item 规格 /Specification 判定标准 /Judgment 额定电压 / Rated voltage: 3.0V DC 试验模式 / Test mode: 2s On, 2s Off, as one cycle. 循环次数 / Test cycle: 50,000 cycles 试验后, 马达应符合项 7-1 的 6-1 寿命要求 After the test, motors Lifetime shall be approved as specified in item 7-1. 常温常湿下放置 4h 后, 马达低温放置应符合项 7-2 的要求 After Low temperature 温度 /Temperature: 30 时间 /Time: 96h hours exposure in ordinary temperature and humidity, exposure motors shall be approved as specified in item 7-2. 常温常湿下放置 4h 后, 马达高温放置应符合项 7-2 的要求 After High temperature 温度 /Temperature: +70 时间 /Time: 96h hours exposure in ordinary temperature and humidity, Exposure motors shall be approved as specified in item 7-2.

5 说明书 /Specification 编号 /No KOTL-S /8 项目 /Item 规格 /Specification 判定标准 /Judgment 常温常湿下放置 4h 6-4 后, 马达应符合项湿度放温度 /Temperature: 的要求 After 4 置湿度 /Humidity: 95%RH hours exposure in High 放置时间 / Exposure time: 96h ordinary temperature Humidity 无水气凝结 / No condensation of moisture and humidity, Motors exposure shall be approved as specified in item 7-2. 全振幅 /Displacement: 1.5mm (p-p) 6-5 频率 /Frequency: 10~55Hz 加速度 /Acceleration: 22m/s 2 测试结果应符合项 7-2 的要求 After the 振动周期 /Period: 10 分钟范围内 (10~55~10Hz)/ test motors shall be Vibration 10 Minutes log sweep (10~55~10Hz) approved as specified 条件 /Condition: 在样机中, 在 3 个垂直的轴方向每个方向做 10 分 in item 7-2. 钟的测试 Samples shall be applied for a period of 10 minutes in three axial directions. 6-6 试验状态 /Test mode: 将马达固定在约 100 克 ( 包括马达本身 ) 的物测试结果应符合项体上, 落向水泥地面 Set the motor to a fixture of approx. 100g (include 自然跌 7-2 的要求 After the the motor) and drop it onto the concrete floor. 落 test motors shall be 高度 /Height: 1.5m Free fall approved as specified 方向 /Direction: ±x, ±y, ±z in item 7-2. 次数 /Number of times: 每个方向 3 次 / Each 3 times 测试模式 / Test mode: 1 hour at -40, 1 hour at +85, as one cycle. Transfer time between extreme temperatures:<5 分 /5min 循环次数 /Test cycle: 15 cycles Temp. Transfer < 5min Transfer < 5min 常温常湿下放置 4h T ( C) +85 后, 马达应符合项 6-7 1h 7-2 的要求 After 4 热冲击 hours exposure in Thermal ordinary temperature shock and humidity, Motors shall be approved as specified in item 7-2. End Time 1h - 40 C

6 说明书 /Specificationn 编号 /No KOTL-S /8 7. 判定基准 / Judgments after Reliability Tests 项目 /Item 7-1 表 A Table A 7-2 表 B Table B 判定基准 /Requirements 1) 额定转速 /Rated speed: 不低于初始值 -30%; 不高于初始值 +50%/ No lower than -30% of initial data; No more than +50% of initial data. 2) 额定电流 /Rated current: 不低于初始值 -30%; 不高于初始值 +50% No lower than -30% of initial data; No more than +50% of initial data. 3) 端阻 /Terminal resistance: 不大于初始值 ±15% No more than +15% of initial data; No less than -15% of initial data. 4) 起动电压 /Starting voltage: 不大于 2.5V 直流电压 2.5V DC Max 5) 绝缘电阻 /Insulation resistance: 大于 10MΩ/ 10MΩ Min 1) 额定转速 /Rated speed: 不大于初始值 ±20% No more than +20% of initial data; No less than -20% of initial data. 2) 额定电流 /Rated current: 不大于初始值 ±20% No more than +20% of initial data; No less than -20% of initial data. 3) 起动电压 /Starting voltage: 不大于 2.5V 直流电压 2.5V DC Max 4) 端阻 /Terminal resistance: 不大于初始值 ±15% No more than +15% of initial data; No less than -15% of initial data.

7 说明书 /Specification 编号 /No KOTL-S /8 8. 使用时注意事项 / Cautions for Use 8-1 必须按照规格书标准使用, 否则性能和寿命都将受到相当地减少, 必须注意电压的使用范围 Unless it is used in accordance with the specifications, the performance and life may be considerably reduced. Due attention should be paid to voltage and range for use. 8-2 建议马达在六个月内使用, 不要在以下环境中使用及保存 : 1. 高温和高湿的场所 ; 2. 腐蚀性气体, 如 :H 2 S SO 2 NO 2 Cl 2 ; 3. 生锈场所 Advice uses this motor within 6 months as avoiding as possible. Avoid use or save the motor in the following environment. 1. High temperature and high humidity area 2. Corrosive gas such as H 2 S, SO 2, NO 2, Cl Dusty area. 8-3 注意处理马达的工作环境, 避免含铁质等物体被马达吸住, 否则马达将会产生噪声, 性能会降低, 从而减少产品可靠性 Due attention must be paid to the handling and working environments because such objects as iron powder if attracted by the motor magnet, will cause noise, characteristic deterioration thus reducing the reliability. 8-4 应确信本产品不会与相关标准法律政令相背 Please confirm enough no problems of standards and laws and ordinances on your cellular phone. 8-5 拿马达时, 要轻拿轻放 To handle the motor, hold the motor case softly. 8-6 钢板面或边缘有少许锈斑是允许的 Rust of plate (steel) and similar edge should be OK. 8-7 我司遵循持续发展的策略, 在不预先通知的情况下, 有对产品 ( 部品 ) 进行修改和改进的权利, 当然这些都不会影响马达的特性及使用功能 Our company follows the sustainable developing strategy, and have the right to make changes and improvements to our product without giving notice in advance. Of course, these changes and improvements will not affect the characterisitics and function of the motor.

8 说明书 /Specification 编号 /No KOTL-S /8 9. 包装 /PACKING

9 说明书 /Specification 编号 /No KOTL-S /8 10. 外形图 / OUTLINE DRAWINGS jinlong-machinery.com

10 说明书 /Specification 编号 /No KOTL-S /8 11. 更改记录 / Records of Revision 修改号 Rev. No. 日期 Rev. Date 页码 Page No. 修改项目 Revised Item 更改原因 Reason / 产品颁布 / Release for Production

<453A5CB9E6B8F1CAE95CB9E6B8F1CAE928B1E2C6BD295C C4EAB9E6B8F1CAE95C284B4F544C2D D303032C1ACBDD3C6F72E646F63>

<453A5CB9E6B8F1CAE95CB9E6B8F1CAE928B1E2C6BD295C C4EAB9E6B8F1CAE95C284B4F544C2D D303032C1ACBDD3C6F72E646F63> 金龙机电股份有限公司 JINLONG MACHINERY & ELECTRONICS CO., LTD. 产品规格书 PRODUCT SPECIFICATION 客户信息客户名称 / Buyer Name 客户料号 /Buyer s Part No. 客户承认签章 /Buyer s Approval & Signatures 金龙公司文件编号 /Spec No. KOTL-S17046 版次 Rev.:A/2