盟訊科技 Display A/D Board 產品承認書 客戶名稱 Customer 產品型號 Part No. UL676H 客戶型號 產品內容 Product type Display A/D Board 客戶確認簽章 : Signature by Customer: Checked By Rechecked By Approved By SAN SHEN ERIC HUANG HANSOM 備註 ROHS 盟訊科技股份有限公司 UNITED LINK TECHNOLOGY CORP. 3F-1, NO. 433, RUI GUANG ROAD,NEI HU DIST.,TAIPEI,114,TAIWAN,R.O.C TEL +886 2 26588180 FAX +886 2 26590862 www.unitedlink.com.tw 1 UL 676H Ver.A
目錄 Ⅰ. 功能與規格.......................................... 3 1. 尺寸說明...................................... 4 2. 電子規格...................................... 5 Ⅱ. 板子與各端子說明................................... 6 1. 各端子位置.................................... 6 2. 各插座說明.................................... 7 Ⅲ. 板子設定............................................ 8 Ⅳ. OSD 功能表說明..................................... 9 OSD Key 使用說明................................. 10 Ⅴ. Main Chip Features................................ 11 Ⅵ. Revision History................................. 14 www.unitedlink.com.tw 2 UL 676H Ver.A
Ⅰ. 功能與規格 www.unitedlink.com.tw 3 UL 676H Ver.A
Ⅰ. 功能與規格 1. 尺寸說明 www.unitedlink.com.tw 4 UL 676H Ver.A
Ⅰ. 功能與規格 2. 電子規格 板厚 :1.2 mm 兩層板單面上件 電源 DC Power IN: 12V ; DC Power Jack 插座 支援 NT68676UFG of Resolution Support RGB WUXGA 1920x1200@60Hz, Panel 種類 Panel LVDS 訊 30PIN 雙排排針式輸出 功能相關 號供電 3.3V 5V 12V 可供選擇 背光 背光開關 有 F/W 支援 6PIN-2.0mm Connecter 調光方式 PWM (12V 2PIN, GND 2PIN) 輸入 輸入端子 DVI 端子 有 DVI-I VGA 端子 有 DB15 90 度端子 其它功能 KeyPad 昇級 HDMI 端子 有 (without CEC function) 480i,480p,576i,576p720p,1080i,1080p PC Audio IN 有 2X1W(8Ω),0.5Vrms Earphone Output 有 0.2~2.0Vrms 特別功能 額外電源輸出 無 CEC 無 對外指示燈號輸出組, 對外接受按鍵 5 組 昇級方式採 VGA 端子..IIC 寫入 www.unitedlink.com.tw 5 UL 676H Ver.A
Ⅱ. 板子與各端子說明 1. 各端子位置 TOP VIEW: FRONT VIEW: CN1 : DC Power IN (DC 12V 電源輸入 ) CN18 : HDMI 輸入端子 CN15 : DVI 輸入端子 CN14: VGA 輸入端子 CN12 : PC AUDIO 輸入 CN4 : EARPHONE 輸出 CN5 : 背光電源與訊號輸出 CN10 : IR Inverter CN11:KeyPAD ( 按鍵 ) 輸入 CN25: LVDS 排針式 (pin header) 輸出 CN20:Speaker 輸出 CN6: PANEL (3.3V 和 5V) 輸出 ;CN7: PANEL (12V) 輸出 www.unitedlink.com.tw 6 UL 676H Ver.A
Ⅱ. 板子與各端子說明 2. 各插座說明 (1). CN1 : DC Power IN (DC 12V 電源輸入 ), DC Power Jack 插座 (2). CN10(3PIN/2.0/NC) : IR Interface Connector PIN1 PIN2 PIN3 IR Receiver GND 5V DC Power Supply (3). CN5(6PIN/2.0) : 背光電源與訊號輸出, 下圖箭頭表 PIN1 PIN1 PIN2 PIN3 PIN4 PIN5 PIN6 12V 12V BL ON/OFF BL ADJ GND GND (4). CN25(2X15PIN/2.0) : LVDS 排針式 (pin header) 輸出, 信號排列如下表 PIN 2 PIN 4 PIN 6 PIN 8 PIN 10 PIN 12 PIN 14 PIN 16 PIN 18 PIN 20 PIN 22 PIN 24 PIN 26 PIN 28 PIN 30 VSEL GND GND TXO0+ TXO1+ TXO2+ GND TXOC+ TXO3+ TXE0+ TXE1+ TXE2+ GND TXEC+ TXE3+ PIN 1 PIN 3 PIN 5 PIN 7 PIN 9 PIN 11 PIN 13 PIN 15 PIN 17 PIN 19 PIN 21 PIN 23 PIN 25 PIN 27 PIN 29 VSEL VSEL GND TXO0- TXO1- TXO2- GND TXOC- TXO3- TXE0- TXE1- TXE2- GND TXEC- TXE3- (5). CN11 (10PIN/2.0): KeyPAD ( 按鍵 ) 輸入, 箭頭表 PIN1 PIN No. PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN9 PIN10 Sch Nane Key 0 LED R LED G GND Key 1 Key2 Key 3 Key 4 No Supply No Supply 對應紅色燈綠色燈 Key 0 function 號號 GND Key 1 Key2 Key 3 Key 4 No Supply No Supply (6). CN20(4PIN/2.0) : Speaker Connector PIN1 PIN2 PIN3 PIN4 LO GND GND RO www.unitedlink.com.tw 7 UL 676H Ver.A
Ⅲ. 板子設定 注意事項 : (1) Panel 電源需正確 (2) Panel 參數需正確 1. 跳 PIN(Jumper) 的說明 表 Jumper 未插上 表 Jumper 插上 (1) CN6 : Panel 電源選擇 Panel 電源為 5V 時 Panel 電源為 3.3 V 時 (2) CN7 : Panel 電源選擇 Panel 電源為 12V 時 www.unitedlink.com.tw 8 UL 676H Ver.A
Ⅳ. OSD 功能表說明 功能選單 色彩調整 對比度 0~100 亮度 0~100 色溫 9300K 6500K User 影像調整 水平位置 0~100 垂直位置 0~100 相位 0~100( 本功能依要求已去除 ) 時脈 0~100 銳度 1 2 3 4 5 自動校正 自動影像調整 是 否 自動色彩調整 是 否 選單調整 語言選擇 8 國語言 選單水平位置 0~100 選單垂直位置 0~100 選單時間 ON OFF 其它 重置 是 否 音量 無使用 Input VGA DVI www.unitedlink.com.tw 9 UL 676H Ver.A
Ⅴ. Main Chip Features NT68676UFG Features Analog Graphic Input Support RGB WUXGA 1920x1200@60, 2048x1152@60hz input for NT68676UFG and WSXGA 1680x1050@75hz for NT68676FG. Triple 8bit 250Mhz ADCs (0.55 ~ 0.9V) Bandwidth 205Mhz HPLL With 64 steps phase Adjust for RGB Channel in NT68676UFG and 166Mhz HPLL for NT68676FG Auto Offset for Component Video Sync. Processor for H/V Sync. Measurement with SOG support Supports Both Non-interlaced and Interlaced Input signals Digital Graphic Input Integrated Single Link TMDS Receiver up To 225MHz deep color mode Support HDCP V1.1 Compliant Support HDMI V1.3 8/10/12 bit deep color mode. Resolutions up To 1080p @ 60Hz Compliant with 8CH Audio decode Build in H/W CEC Controller. Video Processing Zoom and shrink engine with non-linear scaling in horizontal direction for wide screen panels The 4rd generation Bright Frame with adaptive contrast control, 24 color tones adjustment, srgb real color engine and edge enhancement functions Support Linear & Non-linear 4/8/16/32 Segment Histogram & I-Gamma Curve Adjustable sharpness setting Built-in 2D Noise Reduction function and noise meter Dynamic ghost/ ringing reduction filter Dynamic backlight control for ultra-high contrast and power saving Advance dithering enhancement for smoothing gray object that support 16.7M color Sync Processor Support TTL Sync-On-Green (SOG), (Including Sync Slicer) Polarity detection Frequency measurement Fast mode change detection Interlace or non-interlace input detection www.unitedlink.com.tw 10 UL 676H Ver.A
Separate or composite sync auto switching (including Sync Separator) Internal OSD Programmable multi-color RAM font as well as a bitmapped graphical OSD are supported Provide 1,2,3,4 bits/pixel RAM Fonts Optional 10x18, 12x18, 10x16, 12x16 dot matrix Internal SRAM allows up to 8192 characters, with programmable OSD frame size. Width is 128 column, and Height is 64 row Programmable shadow or border control for each character by each row Programmable blinking effects for each character Spacing control to avoid expansion distortion Supports simultaneous display of up to 8 OSD windows for Frame1 (extra 4 wondows for Frame2) Maximum 4 times of global zoom for horizontal and vertical axis Separate row zoom control Support flexible FG or BG optional transparent, translucent, and opaque effects 256 palette with 64K color selectable Top-bottom flip, left-right mirror and 90 degree / 270 degree rotated Flexible Fade-in, Fade-out effect Splitting OSD frame supported Gradient fade-in/fade -out Insert variable space by row 2 Independent control Frame control supported. Pixel base adjustment for window size control. Up to 18K byte RAM size (6Kx24bits) Display Output 8/6 bit single/dual port WUXGA,LVDS panels for NT68676UFG and WSXGA for NT68676FG. LVDS Dual port support up to 200MHz ( AC spec ). All of output keep Low after power up Audio Output 1 Channel R/L analog output for external amplifier ( output 0 ~ 1Vrms) 1 S/PDIF digital output 1 I2S digital output for external amplifier Built-in Dual Pixel LVDS Transmitter Integrate the Dual Port, 4 Data Channel and Clock-Out Low-Voltage differential LVDS transmitter to supports single or dual pixel 6/8-bit display data transmission Suited for single pixel VGA, SVGA, XGA and dual pixel SXGA, WSXGA, WUXGA(NT68676UFG only) display transmission from controller to display with low EMI www.unitedlink.com.tw 11 UL 676H Ver.A
Embedded Microcontroller External SPI flash IF (Support flash size up to 4Mbits) 4 Hardware DDC ports Provide 3 timers for software application. Low power detector function. Misc. Buiild In 3.3V to 1.8V LDO Power 3.3V/1.8V power supply Support Ultra-Low Power Standby Mode. Package QFP 128 pin www.unitedlink.com.tw 12 UL 676H Ver.A
Ⅵ. Revision History 版本變更內容變更時間 Ver. A 初版 2015/03/31 www.unitedlink.com.tw 13 UL 676H Ver.A