TOP-ASIA ELECTRONICS GROUP SPECIFICATION FOR APPROVAL PRODUCT 9Vdc2000mA SPS MODEL SW18-09002000-EK PART NO. SW18-09002000-EKB1 VER: A CUSTOMER PWK DATE 20130726 本电器符合 AC PIN: 2 MEETSAFETYSTD., MEET ROHS MEET CEC STD. 希望回签日 /EXPECTED FEEDBACK BEFORE: 2013 年 8 月 10 日发行印 * 未签回而下订单即视同认可! 生产工厂 /MANUFACTOTRY 设计验证 / 日期 DESIGN VERIFIED BY 设计师 / 日期 DESIGNED BY 工程确认 / 日期 Engineering Verification BY QE 验证 / 日期 QE VERIFIED BY TAE SHENZHEN TOP-ASIA ELECTRONICS CO.,LTD. 地址 : 深圳市宝安区西乡后瑞新瑞物流园 B 栋三楼 Add:3F//A&B.XinRui Logistics pack,hourui,huangtian,xixiang Town,Baoan,Shenzhen,P.R.C. 业务联系 : 채선국 (CAI SEON GUK)070-8860-1863 E-mail: hdt7451@hanmail.net Tel : 070-8860-1863 P.C:518108 Fax: 031-769-1863 Page 1 of 17
UPDATE REV Will you please sign one copy of the specifications as having your approval and return it to us for our records. We would like to point out that your release is directly influencing our bulk production start-up date. If we do not hear from you within 14 days from the date of the most recent revision, we will assume your acceptance. REV UPDATE Detail DATE A FIRST 2013-7-26 Rev.: A Page 2 of 17
Index 1. Scope 4 2. Electrical Characteristics test 4 2.1 Input Characteristic... 4 2.1.1 Input Voltage and Frequency.. 4 2.1.2 Input current... 4 2.1.3 Ac inrush current. 4 2.1.4 Input leakage current 4 2.1.5 Efficiency. 4 2.1.6 Stand-by power consumption.. 4 2.2 Output Characteristic. 5 2.2.1 Output voltage and current 5 2.2.2 Output leakage current.... 5 2.2.3 Startup and Turn-on Delay. 5 2.2.4 Overshoot... 5 2.2.5 Short-Circuit Protection (SCP).. 5 2.2.6 Over Current Protection (OCP) 5 2.2.7 Over Voltage Protection (OVP). 5 2.2.8 Loop Stability..... 5 3. EMC-Specification... 6 4. Safety details:... 6 5. Mechanical Specifications.. 6 5.1 Physical.. 6 5.2 Input and Output Configuration. 6 附图 : 6. DC Cord 1 7. Production of appearance drawing.... 1 8. Label 1 9. PE BAG 1 11. Packing....2 12. BOM 2 Rev.: A Page 3 of 17
1 Scope: This document describes power supply unit for the I.T.E.. This document covers all electrical, mechanical, environmental and testing aspects of the power supply unit. The power supply unit must comply with all of the requirements of this specification and the drawings and specifications referenced here in. 2 Electrical Characteristic test: 2.1 Input Characteristics: 2.1.1 Input Voltage and Frequency The power supply shall meet all specifications when powered from the following sources. Voltage Range Line Frequency Minimum Voltage Maximum Voltage 100-240Vac 47 ~ 63 Hz 90Vac 264 Vac 2.1.2 Input Current The maximum input current shall be less than 1.5A. 2.1.3 AC Inrush Current Peak inrush current shall be limited to 45A within 10ms at 230Vac(Cold Start). 2.1.4 Input Leakage Current The leakage current shall not exceed 0.25 ma. 2.1.5 Efficiency 72.0% Minimum. At input 100-240Vac,100%Load. 2.1.6 Stand-by power consumption 0.75W Max At AC nominal input@output min load Rev.: A Page 4 of 17
2.2 Output Characteristics: 2.2.1 Output Voltage and Current The power supply shall have one regulated DC output of +9V. The table below defines the total regulation band for the output, which includes line regulation, load regulation, transient response, and effects due to environmental conditions and aging. Voltage shall be measured at the power supply output connector Mode Output Current Range Output Voltage range Ripple Noise Min. Max. Min. Max. Max. C.C. 0mA 2000mA 8.55V 9.45V 100mVpp Ripple & Noise Test: Add 0.1uF/50V ceramic capacitor and 10uF/50V capacitor across the output terminal.measured with 20MHz Bandwidth Oscilloscope. Line regulation:<1% ;Load regulation:<5% 2.2.2 Output Leakage Current With the A/C input unplugged, apply a 9V D/C source to the output as specified, The leakage current drawn from the D/C source should be less than 100uA. 2.2.3 Startup and Turn-on Delay Power supply shall be able to start up into a resistive load up to the maximum rated current with maximum load capacitance of 1,000uF. The elapsed time between the application of input power and the attainment of output voltage to the nominal value shall not exceed 1 second. 2.2.4 Overshoot At turn on, the output voltage shall not exceed steady state by more than 10%. 2.2.5 Short-Circuit Protection 6.0W Max Auto recovery. 2.2.6 Over Current Protection 5.5A Max OCP Method :Auto recovery 2.2.7 Over Voltage Protection 15V Max OVP Method: Voltage limit Rev.: A Page 5 of 17
3 EMC-Specification Noise-suppressed acc: EN 55022 4 Safety details: Standards/class : EN60950 ClassII Voltage rating input : 100Vac-240Vac 50-60Hz Output : 9Vdc 2000mA Separation (prim-sec) : galvanic, via transformer Creepage distance : >= 6.0mm And air path : >=4.5mm High-voltage test : >= 3.3KV/2S Leakage current : Maximum leakage current is10ma Application range : Information technology equipment Including electrical business equipment Ambient temperature : 0 C to +40 C, 10 to 90% rhd 5 Mechanical Specifications 5.1 Physical Case material: Dimensions: PC 82mm(L) x 45mm(W) x 32mm(H) (not include input pins) 5.2 Input and Output Configuration Input Pin: Output Connector: Polarity: Lead: EK pins 2.1*5.5*10mm H 头音叉带沟槽 Center positive 1.5m AWM2464 22AWG Rev.: A Page 6 of 17
SR 5.5 Customer: 6 DC Cord drawing(black): 10 0.3 1500 80 2.1 音叉带沟槽 WIRE:AWM2464 22AWG DC PLUG:Φ2.1*5.5*10mm COLOR:BLACK Rev.: A Page 7 of 17
7 Production of appearance drawing(black): 45. 0.5 4.8 0.2 17.2 0.2 17.6 0.5 82 1 35 0.5 17.5 0.2 COLOR:BLACK Rev.: A Page 8 of 17
8 Label: 备注 : 铭牌颜色 : 灰底黑字. Rev.: A Page 9 of 17
180 5 6 02 >PE-HD< 75 5 180 5 POWER-TEK http://www.power-tek.cn 6 15 3 120 5 正面印字 15 3 120 5 反面印字 NOTE: 1. 材质 :PE 材质 2. 厚度 :0.03mm 3. 颜色 : 透明 4. 印字颜色 : 黑色 THIRD ANGLE PROJECTION 第三角法 版面 SHEET SIZE A4 材质 MATERIAL 0.04 PE 薄膜 比例 SCALE 单位 UNIT mm 齐亚圣电子有限公司 TOP-ASIA ELECTRONICS CO.,LTD 承认 APPROVED 确认 CHECKED 检图 CHECKED 制图 DRAWING L <4 4<L <20 公差 TOLERANCE 图名 NAME PE 袋图 页码 PAGE 1/1 杨竣翔 20< L <50 50< L <200 200< L 图号 DWG. NO. 日期 DATE 07/26.13 Rev.: A Page 10 of 17
深圳市齐亚圣电子有限公司 使用机种 备注 : 1. 纸箱材质为 A=A 2. 外箱尺寸为外部尺寸, 公差为 :+5,-0. 3. 装箱方式 : 一箱装 80PCS. 料号 品名 2 外箱 设计 审核 规格 核准 单位 mm 尺寸 A4 版本 A 日期 Customer: 抗张力 14 公斤 /cm Rev.: A Page 11 of 17
隔板 备注 : 使用机种 袋 3. 隔板 505*465*5mm B=B 深圳市齐亚圣电子有限公司 料号 品名 设计 审核 规格 核准 尺寸版本日期 A4 A Customer: 刀卡 ( 短 ) 刀卡 ( 长 ) 1. 刀卡 ( 长 )505*160*5 9 刀口 2. 刀卡 ( 短 )465*160*5 6 刀口 单位 mm Rev.: A Page 12 of 17
深圳市齐亚圣电子有限公司 地址 : 深圳市宝安西乡街道后瑞工业区 B 栋 3 楼 Tel:0755-29602774, Fax:0755-81458001 产品 BOM 资料表 产品编号 : SW18-09002000-EKB1 产品名称 : 9V2A EK B1 版本正标电源适配器 (KR030) 展开阶数 子件编号 子件名称 子件用量 耗损率 位号 1 A02009930070 环保 1.0mm 无铅锡线 sn99.3cu0.7 0.0004KG 0% 锡面修补, 焊 DC 1 A07000550050 环保宽 55mm 厚 0.05 封箱胶 0.0692M 0.3% 封箱 1 A10000000000 环保绿胶水 ( 螺丝固定剂 ) 0.0001KG 0.3% 螺母固定 1 A120000510F0 环保 AP-688/HN3051 硅胶 0.0012 公斤 0.3% 1 C01520480170 外箱 L520*W480*H185mm K=K 外销 0.0125PCS 0.3% 装箱 箱带 POWER-TEK 印字 1 C03180902003 环保标签 9V2A EK 卧式 28*24mm 灰底 1PCS 0.3% 黑字 1 C03FRQCPASS0 QC PASS 易碎贴 ( 周期颜色变换 ) 1PCS 0.3% 上下盖之间 φ15mm 1 C07180012000 PE 袋 180*120*0.06mm 120mm 单面开 1PCS 0.3% 包组立 OK 品 口加孔印可 " 回收 " 标示和 made in china 带 POWER-TEK 字样 1 C08465145050 短 6 刀卡长 465* 宽 160* 厚 5mm B=B 0.1125PCS 0.3% 装箱 1 C08505160050 长 9 刀卡长 505* 宽 160* 厚 5mm B=B 0.075PCS 0.3% 装箱 1 C09505465050 长 505* 宽 465* 厚 5mm 隔板 B=B 0.025PCS 0.3% 装箱 1 EDIDT20100D0 肖特基 MBR20100 TO-220( 金封 ) 1PCS 0.3% D7 1 EIA031027000 绝缘粒 TO-220 1PCS 0.3% D7 1 EIG191303000 绝缘片 TO-220 1PCS 0.3% D7 1 ESA150065040 长 15* 宽 6.5* 厚 4mm 黑色防火海绵贴 1PCS 0.3% 贴于变压器 1 ETHM004N60D0 场效应管 4N60 绝缘型 1PCS 0.3% Q1 1 EWDCB10070C3 红色导线 UL1007 22#0.16/17 总长 2PCS 0.3% N 70mm 9/3.5mm 镀锡 80 300V AC 1 EWJCB21540S3 DC 线 5.5*2.1*10mm 音叉直头带出台 1PCS 0.3% DC OUTPUT UL2464 22#0.16/17 L=1500+40mm 24W Min SR OD=3.5mm 1 HNUSN030024D 螺母 M3*0.5 2PCS 0.3% Q1,D7 1 HRAL0330150A 散热片 (17+16)*19*1.5mm AL 1PCS 0.3% HS1 1 HRAR0360150A 散热片 36*19*1.5mm AL 1PCS 0.3% HS2 1 HSCKM030080D 螺钉 KM3*8mm 细牙镀镍 2PCS 0.3% Q1,D7 1 PCDS09020C10 9V2A 正标插件 OK 板 0 版 1PCS 0% 2 A01009930070 环保无铅纯锡条 0.0007KG 0% PCB 波峰焊接 2 A0300TF88701 环保无铅 TF-88-7 消光型助焊剂 0.0008L 0% PCB 波峰喷雾 2 ECA102DM1CJ0 高压瓷片电容 102M/1KV Y5P( 蓝色 ) 1PCS 0.3% C9 L=3.5±0.4mm 2 ECA104DM1XL1 X 电容 104M/275VAC L13*W6*H12mm 1PCS 0.3% CX1 P=10MM L=3.5±0.4mm 2 ECA106DM1D60 电解电容 LOESR10uF/50V Φ5*11mm 1PCS 0.3% C4 L=3.5±0.2mm 2 ECA108DM1021 电解电容 LOESR 1000UF/16V 1PCS 0.3% C7 Φ10*17mm L=3.5±0.2mm 2 ECA222DJ1LM0 高压米拉电容 222J/630V CL11 1PCS 0.3% C2 P=5MM L=3.5±0.4mm 厚度 3.4mm 2 ECA222DM1YE0 Y1 电容 222M/400V Y5V P=10MM 1PCS 0.3% CY1 L=3.5±0.4mm 2 ECA227DM1020 电解电容 LOESR 220UF/16V 1PCS 0.3% C8 φ6*12mm L=3.5±0.2mm 2 ECA336DM1DE0 电解电容 33UF/400V φ13*20mm 1PCS 0.3% C1 2 ECAHS0701000 热缩套管 φ 1*7mm( 长圆套管 ) 1PCS 0.3% C1+ 2 ECAHS1406000 热缩套管 φ 6*14mm( 长圆套管 ) 1PCS 0.3% F1 2 EDIDDN4007T0 编带 52mm 整流二极管 1N4007 DO-41 5PCS 0.3% D1,2,3,4,6 MIC/CE Rev.: A Page 13 of 17
2 EDIDFFR107T0 编带快恢复二极管 FR107 DO-41 1PCS 0.3% D5 2 EFUT25002021 保险管 2.0A/250V Φ3.6*10.0mm 1PCS 0.3% F1 慢断 2 EICUPC817CD0 光耦 PC817C DIP-4 1PCS 0.3% IC2 2 EINLC15A0750 电感 DR3*12φ0.75*8.5TS 1-2uH 1PCS 0.3% L1 L=4.5±0.5mm 2 EINLS2030250 电感 UU9.8 立式 φ0.25*90ts 1PCS 0.3% LF1 20mH 北清制造 V-0 130 2 EINLT1200500 电感 T9*5*3 φ0.5*14ts 1.2MH 1PCS 0.3% L2 Min L=4.5±0.5mm 2 ERE1503TBFC0 编带碳膜电阻 150K±5% 1/4W 1PCS 0.3% R3 2 EREMF725D9T0 热敏电阻 MF72 5D-9 L=3.5±0.4mm 1PCS 0.3% NTC1 2 ETRH09002001 PQ2020 9V2A 变压器 6+8Pin 900 1PCS 0.3% T1 uh 2 PCSS09020C10 9V2A SMT OK 板 1PCS 0% 3 ECA103NK1S63 贴片电容 0805/103/50V NPO 1PCS 0.3% C5 3 ECA471SK1S63 贴片电容 0805/471/50V ±10% X7R 1PCS 0.3% C6 3 ECA474SK1S63 贴片电容 0805/474/50V ±10% X7R 1PCS 0.3% C10 3 EICUOB2263S0 贴片 IC PWM OB2263 SOT-23-6 1PCS 0.3% IC1 (OB 品牌 ) 3 EICUUTC431S1 SMD 控制 IC UTC431±0.5% SOT-123 1PCS 0% IC3 3 ERE0000SBF14 SMD1206 电阻 0R±5% 印字 0 2PCS 0.3% R9,R15 3 ERE0020SBF14 SMD1206 电阻 2R±5% 印字 2R0 2PCS 0.3% R6,R7 3 ERE0100SAF13 SMD0805 电阻 10R±5% 印字 100 1PCS 0.3% R13 3 ERE0100SBF14 SMD1206 电阻 10R±5% 印字 100 1PCS 0.3% R14 3 ERE0150SBF14 SMD1206 电阻 15R±5% 印字 150 1PCS 0.3% R19 3 ERE030ASBF14 SMD1206 电阻 3R±5% 印字 3R0 1PCS 0.3% R8 3 ERE1001SAD13 SMD0805 电阻 1K±1% 印字 1001 1PCS 0.3% R25 3 ERE1001SAF13 SMD0805 电阻 1K±5% 印字 102 2PCS 0.3% R21,22 3 ERE1003SAF13 SMD0805 电阻 100K±5% 印字 104 1PCS 0.3% R16 3 ERE1003SBF14 SMD1206 电阻 100K±5% 印字 104 2PCS 0.3% R4,R5 3 ERE1004SBF14 SMD1206 电阻 1M±5% 印字 105 3PCS 0.3% R1,R2,R11 3 ERE2200SAF13 SMD0805 电阻 220R±5% 印字 221 1PCS 0.3% R12 3 ERE2201SBF14 SMD1206 电阻 2K2±5% 印字 222 1PCS 0.3% R20 3 ERE2701SAD13 SMD0805 电阻 2K7±1% 印字 2701 1PCS 0.3% R24 3 ERE3900SAF13 SMD0805 电阻 390R±5% 印字 391 1PCS 0.3% R23 3 PCBS05030C11 TAE-5V3A REV:A CEM-1(76*39*T 1PCS 0.3% PCB 1.2MM) 1 PLB24ZXKCBB1 下盖 24W 卧式 KC 黑色铜脚 1PCS 1% 下盖 1 PLM050400250 麦拉片 50*40.5*0.4mm 非边缘背胶 1PCS 0.3% 下盖 右上角带 U 形缺口 1 PLT24ZXTTBB1 上盖 24W 卧式黑色带字无孔 1PCS 1% 上盖 Rev.: A Page 14 of 17
Rev.: A Page 15 of 17
Rev.: A Page 16 of 17
Rev.: A Page 17 of 17