TOP-ASIA ELECTRONICS GROUP SPECIFICATION FOR APPROVAL PRODUCT 12Vdc2000mA SPS MODEL SW24-12002000-W PART NO. SW24-12002000-WB4-F VER: B CUSTOMER PWK DATE 20130819 本电器符合 AC PIN: 2 MEETSAFETYSTD., MEET ROHS MEET CEC STD. 希望回签日 /EXPECTED FEEDBACK BEFORE: 2013 年 08 月 30 日发行印 * 未签回而下订单即视同认可! 生产工厂 MANUFACTOTRY 设计验证 / 日期 DESIGN VERIFIED BY 设计师 / 日期 DESIGNED BY 工程确认 / 日期 Engineering Verification BY QE 验证 / 日期 QE VERIFIED BY TAE SHENZHEN TOP-ASIA ELECTRONICS CO.,LTD. 地址 : 深圳市宝安区西乡后瑞新瑞物流园 B 栋三楼 Add:3F//A&B.XinRui Logistics pack,hourui,huangtian,xixiang Town,Baoan,Shenzhen,P.R.C. 业务联系 : 채선국 (CAI SEON GUK)070-8860-1863 E-mail: hdt7451@hanmail.net Tel : 070-8860-1863 P.C:518108 Fax: 031-769-1863 Page 1 of 17
UPDATE REV Will you please sign one copy of the specifications as having your approval and return it to us for our records. We would like to point out that your release is directly influencing our bulk production start-up date. If we do not hear from you within 14 days from the date of the most recent revision, we will assume your acceptance. REV UPDATE Detail DATE A FIRST 2013-7-11 B 更新铭牌认证号 2013-8-19 Rev.: B Page 2 of 17
Index 1. Scope 4 2. Electrical Characteristics test 4 2.1 Input Characteristic... 4 2.1.1 Input Voltage and Frequency.. 4 2.1.2 Input current... 4 2.1.3 Ac inrush current. 4 2.1.4 Input leakage current 4 2.1.5 Efficiency. 4 2.1.6 Stand-by power consumption.. 4 2.2 Output Characteristic. 5 2.2.1 Output voltage and current 5 2.2.2 Output leakage current.... 5 2.2.3 Startup and Turn-on Delay. 5 2.2.4 Overshoot... 5 2.2.5 Short-Circuit Protection (SCP).. 5 2.2.6 Over Current Protection (OCP) 5 2.2.7 Over Voltage Protection (OVP). 5 2.2.8 Loop Stability..... 5 3. EMC-Specification... 6 4. Safety details:... 6 5. Mechanical Specifications.. 6 5.1 Physical.. 6 5.2 Input and Output Configuration. 6 附图 : 6. DC Cord 1 7. Production of appearance drawing..... 1 8. Label 1 9. PE BAG 1 10. BOX..1 11. Packing.1 12. BOM 2 Rev.: B Page 3 of 17
1 Scope: This document describes power supply unit for the I.T.E.. This document covers all electrical, mechanical, environmental and testing aspects of the power supply unit. The power supply unit must comply with all of the requirements of this specification and the drawings and specifications referenced here in. 2 Electrical Characteristic test: 2.1 Input Characteristics: 2.1.1 Input Voltage and Frequency The power supply shall meet all specifications when powered from the following sources. Voltage Range Line Frequency Minimum Voltage Maximum Voltage 100-240Vac 47 ~ 63 Hz 90Vac 264 Vac 2.1.2 Input Current The maximum input current shall be less than 1.5A. 2.1.3 AC Inrush Current Peak inrush current shall be limited to 45A within 10ms at 230Vac(Cold Start). 2.1.4 Input Leakage Current The leakage current shall not exceed 0.25 ma. 2.1.5 Efficiency 78% Minimum. at input 100-240Vac, 100% Load 2.1.6 Stand-by power consumption 0.75W Max At AC nominal input@output min load Rev.: B Page 4 of 17
2.2 Output Characteristics: 2.2.1 Output Voltage and Current The power supply shall have one regulated DC output of +12V. The table below defines the total regulation band for the output, which includes line regulation, load regulation, transient response, and effects due to environmental conditions and aging. Voltage shall be measured at the power supply output connector Mode Output Current Range Output Voltage range Ripple Noise Min. Max. Min. Max. Max. C.C. 0mA 2000mA 11.4V 12.6V 120mVpp Ripple & Noise Test: Add 0.1uF/50V ceramic capacitor and 10uF/50V capacitor across the output terminal.measured with 20MHz Bandwidth Oscilloscope. Line regulation:<1% ;Load regulation:<5% 2.2.2 Output Leakage Current With the A/C input unplugged, apply a 12V D/C source to the output as specified, The leakage current drawn from the D/C source should be less than 100uA. 2.2.3 Startup and Turn-on Delay Power supply shall be able to start up into a resistive load up to the maximum rated current with maximum load capacitance of 1,000uF. The elapsed time between the application of input power and the attainment of output voltage to the nominal value shall not exceed 1 second. 2.2.4 Overshoot At turn on, the output voltage shall not exceed steady state by more than 10%. 2.2.5 Short-Circuit Protection 8W Max Auto recovery. 2.2.6 Over Current Protection 5.5A Max OCP Method :Auto recovery 2.2.7 Over Voltage Protection 18V Max OVP Method: Voltage limit Rev.: B Page 5 of 17
3 EMC-Specification Noise-suppressed acc: EN 55022 4 Safety details: Standards/class : EN60950 ClassI/II Voltage rating input : 100Vac-240Vac 50-60Hz Output : 12Vdc 2A Separation (prim-sec) : galvanic, via transformer Creepage distance : >= 6.0mm And air path : >=4.5mm High-voltage test : >=3.6KV/2S Leakage current : Maximum leakage current is10ma Application range : Information technology equipment Including electrical business equipment Ambient temperature : 0 C to +40 C, 10 to 90% rhd 5 Mechanical Specifications 5.1 Physical Case material: Dimensions: PC 96mm(L) x 44mm(W) x 30mm(H) 5.2 Input and Output Configuration Input Pin: Output Connector: Polarity: Cord: EK ACpins 2.1*5.5*10mm H 头音叉带沟槽 Center positive 1.5m AWM2464 22AWG Rev.: B Page 6 of 17
SR SR 80±10 5.5 Customer: 6 DC Cord drawing(black): 10 0.5 120 1500 80 700 50 2.1 WIRE: AWM2464 22AWG DC PLUG:Φ5.5*2.1*10mm COLOR:BLACK EK AC CORD Rev.: B Page 7 of 17
7 Production of appearance drawing(black): Rev.: B Page 8 of 17
8 Label: 31.5 +0-0.2 POWER-TEK 电源适配器 AC/DC ADAPTER MODEL/ 型号 :SWPP-12002000-W PART/ 料号 :SWPP-12002000-WB4-F INPUT/ 输入 :100-240VAC,50/60Hz,1.5A OUTPUT/ 输出 : 12V 2.0A : SW24-12002000-W : 100-240VAC 50/60Hz 1.5A : 12V 2.0A : SHENZHEN TOP-ASIA ELECTRONICS CO.,LTD : CHINA 71.5 +0-0.2 HU10553-11005 : P S E 届出事业者 S&E A072221 CAUTION 注意 : FOR INDOOR USE ONLY 仅限室内使用 RISK OF ELECTRIC SHOCK 内有高压危险 DRY LOCATION USE ONLY 仅限在干燥地点使用 C UL R LISTED E333054 46AV US I.T.E.POWER SUPPLY MADE IN CHINA/ 中国制造 备注 : 铭牌颜色 : 灰底黑字. Rev.: B Page 9 of 17
9.PE BAG 330 5 6 02 >PE-HD< 75 5 330 5 POWER-TEK http://www.power-tek.cn 6 15 3 110 5 正面印字 15 3 110 5 反面印字 NOTE: 1. 材质 :PE 材质 2. 厚度 :0.03mm 3. 颜色 : 透明 4. 印字颜色 : 黑色 THIRD ANGLE PROJECTION 第三角法 版面 SHEET SIZE A4 材质 MATERIAL 0.04 PE 薄膜 比例 SCALE 单位 UNIT mm 齐亚圣电子有限公司 TOP-ASIA ELECTRONICS CO.,LTD 承认 APPROVED 确认 CHECKED 检图 CHECKED 制图 DRAWING L <4 4<L <20 公差 TOLERANCE 图名 NAME PE 袋图 页码 PAGE 1/1 杨竣翔 20<L <50 50< L <200 200< L 图号 DWG. NO. 日期 DATE 07/11.13 Rev.: B Page 10 of 17
备注 : 2.L=150 2mm,W=60 2mm,H=70 2mm. 品名 设计 审核 规格 尺寸 A4 版本 A 日期 Customer: 1. 白色纸盒 (T=1.0mm) 使用机种料号 核准单位 mm Rev.: B Page 11 of 17
深圳市齐亚圣电子有限公司 使用机种 备注 : 隔板 1. 纸箱材质为 A=A 2. 外箱尺寸为外部尺寸, 公差为 :+5,-0. 4. 隔板 :345L*295Wmm B=B. 料号 品名 外箱 2 设计 审核 规格 核准 单位 mm 尺寸 A4 版本 A 日期 Customer: 抗张力 14 公斤 /cm 3. 装箱方式 : 50PCS/ 箱 345 295 Rev.: B Page 12 of 17
深圳市齐亚圣电子有限公司 地址 : 深圳市宝安西乡街道后瑞工业区 B 栋 3 楼 Tel:0755-29602774, Fax:0755-81458001 产品 BOM 资料表 产品编号 : SW24-12002000-WB4-F 产品名称 : 12V2A B4 版本 F 电源适配器 (KR030) 展开阶数 子件编号 子件名称 子件用量 耗损率 位号 1 A02009930070 环保 1.0mm 无铅锡线 sn99.3cu0.7 0.0004KG 0% 1 A07000550050 环保宽 55mm 厚 0.05 封箱胶 0.0629M 0.3% 1 A10000000000 环保绿胶水 ( 螺丝固定剂 ) 0.0002KG 0.3% 1 A120000510F0 环保 AP-688/HN3051 硅胶 0.0018 公斤 0% 1 C01360310360 外箱 L370*W320*H340mm A=A 外销 0.02PCS 0.3% 箱带 POWER-TEK 印字 1 C02150060070 小白盒 L150*W60*H70mm 300g+ 表坑 1PCS 0.3% 1 C03241202005 标贴 31.5*71.5mm 12V2A 灰底黑字 1PCS 0.3% FOR CASE 1 C03FRQCPASS0 QC PASS 易碎贴 ( 周期颜色变换 ) 1PCS 0.3% φ15mm 1 C07330011000 PE 袋 330*110*0.06mm 110mm 单面开 1PCS 0.3% 口, 加孔, 印可 " 回收 " 标志和 made in china 带 POWER-TEK 字样 1 C09345295050 隔板长 345* 宽 295* 厚 5mm 0.04PCS 0.3% 1 ECAHS7314001 热缩套管厚 0.4mm* 14mm* 长 73mm 1PCS 0.3% HS2 ( 长圆套管 ) 1 EDIDT10100D0 肖特基 MBR10100 TO-220( 金封 ) 1PCS 0.3% D7 1 ESA065050130 防火海绵单面贴 L13*W6.5*H5mm 1PCS 0.3% 变压器顶部 1 ETHM004N60D0 场效应管 4N60 绝缘型 1PCS 0.3% Q1 1 EWBBEK0700W1 韩规对 36W SR 0.3m m2 *2 电源线 1PCS 0.3% 原 AC 座位置 印字 0.75m m2 *2 L=700+35mm 1 EWKCB21535T1 DC 线 5.5*2.1*10mm 音叉直头带出台 1PCS 0.3% V+/V- UL2464 22#0.16/17 L=1500+40mm 带磁环 36W SR 0D=3.5mm 1 HNUSN030024D 螺母 M3*0.5 2PCS 0.3% Q1,D7 1 HRAL0880195A 散热片 2.0*19.5*88mm AL( 单脚钉 ) 1PCS 0.3% HS2 1 HRAR0620200A 散热片 62*20*1.5 AL 1PCS 0.3% HS1 1 HSCKM030080D 螺钉 KM3*8mm 细牙镀镍 2PCS 0.3% FOR HS1;2 1 PCDSTAE24C3F 12V2A F 插件 OK 板 3 版 1PCS 0% TAE-36W 方案 2 A01009930070 环保无铅纯锡条 0.0008KG 0% PCB 波峰焊接 2 A0300TF88701 环保无铅 TF-88-7 消光型助焊剂 0.001L 0% 喷雾 2 ECA104DM1XL2 X 电容 104M/275VAC L18*W6*H12mm 1PCS 0.3% CX1 P=15MM L=3.5±0.4mm 2 ECA106DM1D60 电解电容 LOESR10uF/50V Φ5*11mm 1PCS 0.3% C4 L=3.5±0.2mm 2 ECA107DM1020 电解电容 LOESR100UF/16VΦ5*11mm 1PCS 0.3% C9 L=3.5±0.2mm 2 ECA108DM1021 电解电容 LOESR 1000UF/16V 2PCS 0.3% C7,C8 Φ10*17mm L=3.5±0.2mm 2 ECA222DJ1LM0 高压米拉电容 222J/630V CL11 1PCS 0.3% C2 P=5MM L=3.5±0.4mm 厚度 3.4mm 2 ECA222DM1YE0 Y1 电容 222M/400V Y5V P=10MM 1PCS 0.3% CY1 L=3.5±0.4mm 2 ECA476DM1DE0 电解电容 47uF/400V Φ 16*27 1PCS 0.3% C1 2 ECAHS1205000 热缩套管 φ 5*12mm( 长圆套管 ) 1PCS 0.3% R9+ 2 EDIDFFR104T0 编带快恢复二极管 FR104 DO-41 1PCS 0.3% D6 2 EDIDFFR107T0 编带快恢复二极管 FR107 DO-41 1PCS 0.3% D5 2 EDIDKBP206D0 桥堆 KBP206 2A/600V 1PCS 0.3% BD1( 注意加工脚长, 引脚需歪插才对 PCB 孔 ) 2 EDILEG3000D0 LED 绿色普亮雾状 φ3mm 1PCS 0.3% LED1 Rev.: B Page 13 of 17
2 EFUT25003120 保险管 3.15A/250V φ3.6*10mm 1PCS 0.3% F1 慢断 2 EICUPC817CD0 光耦 PC817C DIP-4 1PCS 0.3% U2 2 EINLT9010650 电感 T12.7*7.3*4.7 φ0.65 0.9mH 1PCS 0.3% L1 L=4.5±0.5mm 2 EJU0605035C0 跳线 φ 0.6*5mm L=5±0.3mm 1PCS 0.3% L3 2 EJU0606035C0 跳线 φ 0.6*6mm L=5±0.3mm 1PCS 0.3% J2 2 EJU0608035C0 跳线 φ 0.6*8mm L=5±0.3mm 2PCS 0.3% L2 2 EJU0611035C0 跳线 φ 0.6*11mm L=5±0.3mm 1PCS 0.3% J1 2 ERE047BTDFC0 F 型碳膜电阻 0R47±5% 1W 1PCS 0.3% R9 L=3.5±0.4 2 EREMF725D9T0 热敏电阻 MF72 5D-9 L=3.5±0.4mm 1PCS 0.3% NTC1 2 ETRH000RM100 环保变压器 12V3A 无铅 RM10 42:6:9 1PCS 0.3% T1 800UH 带飞线 2 PCSSRHD36C15 12V3A SMT OK 板 5 版 1PCS 0% 3 ECA102SK1S63 贴片电容 0805/102/50V ±10% X7R 3PCS 0.1% C3,C5,C6 3 ECA104SK1S63 贴片电容 0805/104/50V ±10% X7R 1PCS 0.1% C10 国巨品牌 ( 厚度 1.25±0.1mm) 3 ECA471SK1S63 贴片电容 0805/471/50V ±10% X7R 1PCS 0.1% C11 3 EICCOX3165S0 贴片 IC PWM COX3165/SOP-8 1PCS 0% U1 3 EICUUTC431S1 SMD 控制 IC UTC431±0.5% SOT-123 1PCS 0% U3 3 ERE0100SAF13 SMD0805 电阻 10R±5% 印字 100 1PCS 0.1% R11 3 ERE0100SBF14 SMD1206 电阻 10R±5% 印字 100 1PCS 0.1% R13 3 ERE0270SBF14 SMD1206 电阻 27R±5% 印字 270 2PCS 0.1% R10,Re 3 ERE0471SAF13 SMD0805 电阻 470R±5% 印字 471 1PCS 0.1% R18 3 ERE1001SAD13 SMD0805 电阻 1K±1% 印字 1001 1PCS 0.1% R15 3 ERE1001SAF13 SMD0805 电阻 1K±5% 印字 102 1PCS 0.1% R16 3 ERE1002SAF13 SMD0805 电阻 10K±5% 印字 103 1PCS 0.1% R7 3 ERE1004SBF14 SMD1206 电阻 1M±5% 印字 105 2PCS 0.1% R3,R4 3 ERE2200SAF13 SMD0805 电阻 220R±5% 印字 221 1PCS 0.1% R8 3 ERE2201SBF14 SMD1206 电阻 2K2±5% 印字 222 1PCS 0.1% R6 3 ERE2702SAF13 SMD0805 电阻 27K±5% 印字 273 1PCS 0.1% R12 3 ERE3303SBF14 SMD1206 电阻 330K±5% 印字 334 4PCS 0.1% Ra,Rb,Rc,Rd 3 ERE3901SAD13 SMD0805 电阻 3K9±1% 印字 3901 1PCS 0.1% R20 3 ERE4701SAF13 SMD0805 电阻 4K7±5% 印字 472 1PCS 0.1% R14 3 ERE5103SBF14 SMD1206 电阻 510K±5% 印字 514 2PCS 0.1% R1,R2 3 PCBSTAE36C12 PCB TAE-36W 90.5*39.5*1.6mm 1PCS 0% PCB 22F 1 PLB36ZXWWWB2 下盖 36W 台式黑色 (SR+SR) 1PCS 1% CASE 1 PLT36ZXWWWB2 上盖 36W 台式黑色带字 (SR+SR) 1PCS 1% CASE Rev.: B Page 14 of 17
Rev.: B Page 15 of 17
Rev.: B Page 16 of 17
Rev.: B Page 17 of 17