規格書

Instruction Manual / 使用手冊 CE KT Paddle Wheel Flow Sensor & Meter Series 轉子式流量感測器 & 流量計 F - Multi-function Paddle Wheel Flow meter KTS / KTP / KTM series 多功能轉子流量計 * Accuracy is less than ± 1.0% of F.S. * Pulse rate(k - factor)is settable * Unit of Flow total meter is selectable (Liter/Gallon/Kilo-liter) * Unit of pulse is selectable (LPP/GPP/KLPP) * Status of Flow rate meter limit output (NO/NC)is changeable * Power on delay time is settable for Flow rate meter limit output * 測量精度 :± 1.0% of F.S. max. * 流量系數 K 值可設定 * 總流量計的單位可選擇 ( 公升 / 加倫 / 仟公升 ) * 脈沖輸出流量單位可選擇 ( 公升 / 加倫 / 仟公升 ) * 瞬間流量計警報輸出狀態 (NO/NC) 可設定 * 瞬間流量計警報輸出送電延遲時間可設定 KTP series * Limit of Flow rate meter + Flow total meter are settable * Communication RS-485 is optioned * 瞬間流量計及總流量計警報輸出可設定 * 可選用附 RS-485 通訊功能 KTM series * Limit of Flow rate meter + Flow total meter are settable * Transmitter:both of 4 ~ 20mA or 0 ~ 5V * 瞬間流量計及總流量計警報輸出可設定 * 附傳送器 : 4 ~ 20mA 或 0 ~ 5V KTS series * Limit of Flow rate meter is settable * Flow rate meter limit output:relay(1a) * Unit of pulse is selectable(lpp/gpp/klpp) * 瞬間流量計警報輸出可設定 * 瞬間流量計警報輸出 : 繼電器 (1a 接點 ) * 脈沖輸出流量單位可選擇 ( 公升 / 加倫 / 仟公升 ) 1111 1 :Flow meter 2 :Lead wire 3 :Hall sensor 4 :Paddle wheel 5 :Body 6 :Pipe connector FOTEK 1

Guiding of model / 型號索引 KTP 15 RS PF M12 1 2 3 4 5 1:Series / 系列 4:Material of Union / 接管材質 KTM = Paddle Wheel Flow rate Meter with transmitter PP = PP KTP = Paddle Wheel Flow rate Meter& Flow total meter PF = PVDF KTS = Paddle Wheel Flow rate Meter PVC = PVC KTW = Paddle Wheel Flow Sensor ST = SUS 316 2:Pipe size / 管徑 15 = DN15(1/2 ) / 20 = DN20(3/4 ) 25 = DN25(1 ) / 40 = DN40(1 1/2 ) 50 = DN50(2 ) 3:Communication or Transmitter / 通訊或傳送方式 Non = Without communication RS = KTP series with RS-485 or MODBUS selectable A = KTM & KTW series with Transmitter (4 ~ 20mA) V = KTM & KTW series with Transmitter(0 ~ 5V) P = KTW series pulse output only General Data / 共同規格 5:Connection method / 出線方式 Non = Lead wire(3m) 5m = Lead wire(5m) M12 = Connector M12 Specification 規格 Description Fluid 量測流體 Water or Chemical fluid Accuracy 量測精度 ± 2.0% of F.S. @ 25 Flow velocity 最大流速 10 m / s max. Low cut 最小流速 0.3 m / s min. Operating press. 工作壓力 5 kg / cm 2 Range ability 流量範圍 10:1 Response time 反應時間 Real time Material 材質 Paddle:Tefzel ;Body:PP Operating temperature 工作溫度 PVC < 50 / PP < 80 / PF < 100 / ST < 120 Operating circumstance 工作環境 -20 ~ +80 ;35% ~ 85% RH Protection class 保護等級 IP-65 Approval 認證 CE Specification / 規格 Product 產品 Flow meter Flow sensor Model 型號 KTS KTP KTM KTW Operating voltage 工作電壓 10 ~ 3DC 12~24VDC Current consumption 消耗電流 60mA max. 60mA max. Flow rate meter(lpm) 瞬間流量計 0.0 ~ 999.9 LPM(4 digits) Non Control output(lpm) 控制輸出 Relay NPN(150mA max.) Non Flow Total meter(ftm) 總流量計 Non 0 ~ 999999(6 digits) Non Control output(ftm) 控制輸出 Non NPN(150mA max.) Non Transmitter 傳送器 NPN Pulse output Non 4 ~ 20mA or 0 ~ 5V 4 ~ 20mA or 0 ~ 5V Communication 通訊模式 Non RS-485(Optioned) Non Non Approval 認證 CE 2 FOTEK

Setting of parameter / 參數設定 KTP/KTM series Function of display Display Description 運轉狀態 Running status +F 3 sec 鎖定設定 Setting of lock 累積流量單位選擇 Unit of flow total meter K 值設定 Coefficient of flow volume 瞬間流量計傳送範圍設定 Range of transmitter for LPM 3 sec 傳送最大值偏差修正 Span of transmitter 傳送零點偏差修正 Offset of transmitter 9 9 9 9 9 9 9 9 9. 9 L c k 10 U t 0 K 124.5 t r 1350.0 SPn 1.000 O S t 0.000 1> Range:0 ~ 999999 2>Flow Total meter + Flow rate meter 1> Lck = 10 :settable 1> Range:0 ~ 3 2> Unit selecting of Flow total meter 3> Ut = 0 :Liter; Ut = 1 :Gallon; Ut =2 :Kilo liter(kl) 1> Range:0.1 ~ 999.9 2> Value of Flow rate meter = Input pulses x 1 / k (LPM) 1>Range:0.1 ~999.9 2> 0.0 ~ T r 4~20 ma or 0 ~ 5V 1> Range:0.000 ~ 9.999 2> Standard value:1.000 1>Range:0.000 ~ 9.999 2>Value of offset:0.000ma ~ 1.999mA How to set the limit of meter / 如何設定流量計警報值 KTP / KTM series Function of Meter Display Description Flow total meter + Flow rate meter Press Setting of Flow rate meter Press Setting of Flow total meter Press 9 9 9 9 9 9 CV 123.4 SV 1 2 3. 4 CV 100.0 SV 9 9 9 9 9 9 CV 100000 SV 1> CV :Flow total meter, Unit:Liter, Gallon or KL selectable. Range = 0 ~ 999999() 2> SV :Flow rate meter, Unit:0.1LPM Range = 0.0 ~ 999.9 1> CV :Flow rate meter, Unit:0.1LPM 2> SV :Preset value of flow rate meter, CV SV Flow rate meter output ON CV < SV Flow rate meter output Off 1> CV :Flow total meter, Unit:Little, Gallon or Ton selectable. 2> SV :Preset value of flow total meter, CV SV Flow total meter output ON control:manual reset or Auto reset selectable. If Con = E :Flow total meter output Unit volume Pulse output * Please press the SET or key to set the limit of LPM or FTM FOTEK 3

Setting of control / 控制設定 KTP/KTM series Function of display Display Description 運轉狀態 Running status 3 sec FTM 輸出控制 OP2 control 輸出復歸時間設定 OP2 output reset time LPM(OP1) 輸出狀態 LPM(OP1) status LPM 輸出復歸應差 Hysteresis of LPM output OP1 送電動作延遲時間 OP1 power on delay time 通訊碼選擇 Communication code 傳輸速率選擇 BPS 通訊站號設定 Controller No. 9 9 9 9 9 9 9 9 9. 9 Con n t 1 0.50 CoS 0 Hys 1.0 t 2 10 r S 0 b P S 9600 I d 1 1>Range:0 ~ 999999 2>Flow total meter + Flow rate meter 1>Range:N/R/C/A/E output control for Flow total meter 2> Con = n :Op 2 manual reset; Con = r :Op 2 auto reset Con = rc:op 2 auto reset Con = E :Op 2 = Pulse output of Unit volume 1> Range:0 ~ 999.99 sec;reset time of Flow total meter 2> Con = n or E t 1 to be disappeared 1>Range:0 ~1 2> CoS = 0 : LPM > SV Op 1 ON LPM < SV - HYS Op 1 OFF CoS = 0 : LPM < SV Op 1 ON LPM > SV + HYS Op 1 OFF 1>Range:0.1 ~ 999.9 1>Range:0 ~ 9999 1>Range:0 ~3 2> RS = 0 : BCD ; RS = 1 : RTU-HEX RS=2 : ASCII-BCD ; RS=3 : MODBUS-HEX 1>Range:96 or 192 2> 96 = 9600 bps 192 = 19200 bps 1> Range:1 ~ 99 4 FOTEK

Setting of parameter / 參數設定 KTS series Function of display Display Description 運轉狀態 Status of running +F 3 sec 鎖定設定 Setting of lock K 值設定 Setting of K value 警報輸出狀態設定 Setting of Alarm status 送電動作延遲時間 Power on delay time 9 9 9 9 L k.10 1 2 3. 4 C.0 t.00 2> Range:0 ~ 999999 3> Flow meter 1> Lk = 10 :settable 1> Range:0.1 ~ 999.9 2> Coefficient off Flow meter = Input pulses x 1 / k (LPM) 1>Range: C.0 ~ C.1 2> C.0 : PV > SV Relay ON C.1 : PV < SV Relay ON 1> Range:0 ~ 99 sec 2> Delay time of power on alarm output Setting of Alarm / 警報設定 KTS series Function of display Display Description 流量計 Flow rate meter 3 sec 警報值設定 (SV) Setting of limit 警報應差設定 Hysteresis of limit 9 9 9. 9 6 6 6. 6 d. 9 9. 9 1> Range:0 ~ 999.9 2> Flow rate meter 1> Range:0.1 ~ 999.9 2> C.0 : PV > SV Relay ON C.1 : PV < SV Relay ON 1> Range:0.1 ~ 99.9 2> C.0 : PV SV - d Relay OFF C.1 : PV SV + d Relay OFF * In the setting status, the display will be flicking. * 設定狀態 : 顯示器會閃爍 FOTEK 5

Illustration / 參數說明 1> K :Coefficient of flow volume, It is required to set the correct value of K into the flow meter, If not, the flow meter will display the error flow value. 2> t r :Range of transmitter(lpm), 0.0 ~ T r 4~20 ma or 0 ~ 5V 3> SPn :Span of transmitter(lpm), Range: 0.000 ~ 9.999 :Standard value: 1.000 4> OSt :Offset of transmitter(lpm), Range: 0.000 ~ 9.999 ;Standard value: 0.000 5> Con : control of flow total meter(op2), Con= n Manual reset, Con= r Auto reset, Con= C Auto reset, Con= E Pulse output of Unit volume 6> Cos :Flow rate meter(lpm)output status selecting(op1), Cos = 0 : LPM > SV OP1 ON; LPM < SV - HYS OP1 OFF Cos = 1 : LPM < SV OP1 ON; LPM > SV + HYS OP1 OFF 7> How to reset the flow total meter:please press SET 及 key 3 sec to reset the flow total meter. 1> K : 流量系數, 請輸入正確 K 值否則無法顯示正確的每分鐘流量 2> t r : 傳送器轉換範圍設定, 0.0 ~ T r 4~20 ma or 0 ~ 5V 3> SPn : 傳送器斜率修正, 範圍 : 0.000 ~ 9.999 ; 標準值 = 1.000 4> OSt : 傳送器零點修正,, 範圍 : 0.000 ~ 9.999 ; 修正值範圍 : 0.000mA ~ 1.999mA 5> Con : 累計流量計輸出控制選擇, Con= n 手動復歸, Con= r 自動復歸, Con= c 自動復歸, Con= E 單位流量脈沖輸出 6> 如何歸零累積流量計 : 請同時按 SET 及鍵 3 秒可將累積流量計歸零 7> Cos : 瞬間流量計 (LPM) 輸出狀態選擇 (OP1), Cos = 0 : LPM > SV OP1 ON; LPM < SV - HYS OP1 OFF Cos = 1 : LPM < SV OP1 ON; LPM > SV + HYS OP1 OFF * Unit of Flow rate meter LPM ( 瞬間流量計單位 ):LPM(Litter per minute)( 公升 / 分鐘 ) * Unit of Flow total meter FTM ( 總流量計單位 ):Litter( 公升 ) / Gallon ( 加侖 )/ KL( 公噸 ) Range of transmitter KTW series / 傳送器轉換範圍 KTW series DN15 DN20 DN25 DN40 DN50 Range(LPM) 0 ~ 30 0 ~ 60 0 ~ 90 0 ~ 200 0 ~ 330 Remarks 1> Range of transmitter:it is transmitted to 4.0 ~ 20.0 ma or 0.0 ~ 5.0 V 傳送範圍 : 依傳送範圍轉換成 4.0 ~ 20.0 ma 或 0.0 ~ 5.0 V 2> It is accepted to modify the range of transmitter on customer s demand. 可依客戶需求修改傳送器轉換範圍 * Please press the SET or key to set the limit of LPM or FTM 6 FOTEK

Wiring diagram / 接線圖 KTW- -P- KTW- -V- / KTW- -A- Bro wn( 棕 ) + V Bro wn ( 棕 ) + V Grey( 灰 ) Blu e ( 青 ) Shielded ( 隔離線 ) Grey ( 灰 ) Bla ck ( 黑 ) White( 白 ) Blu e ( 青 ) Sh ie ld e d ( 隔離線 ) + + A or V Brown 12~24VDC Black +(0~5V or 4~20mA) Brown 12~24VDC Grey Pulse output Blue White -(0~5V or 4~20mA) Blue Shielded Shielded wire Grey Paddle Pulse output Shielded Shielded wire KTP- KTM- 1 Bro wn ( 棕 ) + V 1 Bro wn ( 棕 ) + V 4 Bla ck ( 黑 ) 2 White ( 白 ) 5 Ye llo w ( 黃 ) 6 Grey( 灰 ) 3 Blu e ( 青 ) + RS-485 4 2 5 6 3 Black ( 黑 ) White( 白 ) Ye llo w ( 黃 ) Grey( 灰 ) Blu e ( 青 ) + A or + V * Black wire is changeable for FTM limit output or Unit volume Pulse output. * 黑色線可選擇總流量計警報輸出或單位流量脈沖輸出 * Black wire is changeable for FTM limit output or Unit volume Pulse output * 黑色線可選擇總流量計警報輸出或單位流量脈沖輸出 Brown 10~3DC Yellow (+)RS-485 Brown 10~3DC Yellow +(4~20mA)or(0~5V) Blue Grey (-)RS-485 1 Blue Grey -(0~5V or 4~20mA) Black Flow total meter output White Flow rate meter output Black Flow total meter output White Flow rate meter output KTS- Application note 1 Bro wn ( 棕 ) 4 Black ( 黑 ) 5 Grey ( 灰 ) 2 White ( 白 ) 3 Blu e ( 青 ) NO + V COM * Black wire is an Unit volume Pulse output * 黑色線是單位流量脈沖輸出 Brown 10~3DC White COM Blue Grey NO Black NPN Pulse output Load resistance: Current output(4 ~ 20mA):120Ωmax. Voltage output(0 ~ 5V):10KΩmin. 負載阻抗 : 電流輸出 (4 ~ 20mA):120Ωmax. 電壓輸出 (0 ~ 5V):10KΩmin. FOTEK 7

Dimension / 外形圖 Pipe size 管徑 H L ΦD KTW KTM / KTP All type Pulse output Linear output DN15 78 86 95 140 41 DN20 80 88 97 150 53 DN25 83.3 91.3 100.3 160 60 DN40 101.6 109.6 118.6 185 83 DN50 115.4 123.4 132.4 196.8 110 Standard pipe size/ 標準管徑 Flow rate(lpm) Pipe size(o.d.) JIS ANSI DIN 0.3m/s min. 10m/s max. DN15(1/2 ) ψ18 ψ21.34 ψ20 3.5 120.0 DN20(3/4 ) ψ26 ψ26.67 ψ25 5.0 170.0 DN25(1 ) ψ32 ψ33.40 ψ32 9.0 300.0 DN40(1 1/2 ) ψ48 ψ48.26 ψ50 25.0 850.0 DN50(2 ) ψ60 ψ60.32 ψ63 40.0 1350.0 Installation positions / 正確安裝位置 Correct Incorrect Correct Incorrect Correct Incorrect Correct Incorrect Notice of Installation / 安裝注意事項 1> Please make sure the measuring tube must be filled with the fluid under normal operation. 請確保測量管線滿水位狀態, 否則會造成量測誤差 2> KT series can be installed at horizontal or vertical direction. KT 系列可以水平或垂直安裝 3> Please set enough length of straight pipe to avoid the vortex might be existed. (The minimum straight upstream must be over 10 x DN and downstream must be observed over 3 x DN) 安裝流量感測器時請在流量感測器前後保留適當長度的直管以防止產生窩流 3> Please adopt filtering device in the upstream to avoid the paddle wheel from be damaged by the solids or fibers. 請在流量感測器前安裝適當的濾網以避免異物破壞轉子 5> Please do not flush the pipe after the measuring unit being installed, if do, that may crack the ceramic shaft. 流量感測器完成安裝後請勿再沖洗管路, 否則可能毀損陶瓷轉軸陽明電機股份有限公司 FOTEK CONTROLS CO.,LTD. Specification may be modified without notice in advance. Copy right @ fotek 2008/10/10 F-

Instruction Manual / 使用手冊 CE KTF Thermal Mass Flow Sensor Series 熱質式流量感測器 F - Guiding of model / 型號索引 KTF 050 A N2 1 2 3 4 1:Series / 系列 KTF = Paddle Wheel Flow Sensor 2:Flow range / 流量 050 = 50LPM(nor.), 1/4 080 = 80LPM(nor.), 1/4 100 = 100LPM(nor.), 1/4 200 = 200LPM(nor.), 1/2 300 = 300LPM(nor.), 1/2 400 = 400LPM(nor.), 3/4 500 = 500LPM(nor.), 3/4 3:Transmitter / 傳送方式 A = 4 ~ 20mA + Pulse output V = 0 ~ 5 V + Pulse output 4:Gases / 量測氣體 N2 = N2 O2 = O2 Da = Dry air Specification / 規格 Specification 規格 Description Gases 量測流體 N2,O2 or Dry air Measuring range 量測範圍 Min. 0 ~ 50 L/min(nor.);Max. 0 ~ 500 L/min. Accuracy 量測精度 ± 2.0% of F.S. @ 25 Low cut 最小流速 <2% of F.S. Operating press. 工作壓力 - 0.07 ~ 0.98Mpa Response time 反應時間 3 sec max. Operating voltage 工作電壓 12 VDC ± 10% Ripple of power 電源漣波 10%peak to peak Current consumption 消耗電流 250mA max. Transmitter 傳送方式 Linear output(4 ~ 20mA)or(0 ~ 5 V) Resistance of output 輸出阻抗 50Ω max. Material of body 本體材質 SUS 316 Material of housing 外殼材質 ABS Operating circumstance 工作環境 5 ~ + 50 ;35% ~ 85% RH Protection class 保護等級 IP- 65 Approval 認證 CE Dimension / 外形圖 Measuring range (LPM) H1 (mm) H2 (mm) L (mm) 50 / 80 / 100 89.5 25 76 200 96.5 32 76 300 96.5 32 112 400 102.5 38 112 500 102.5 38 112

Wiring diagram / 接線圖 KTF- -V- / KTF- -A- Bro wn ( 棕 ) Bla ck ( 黑 ) White ( 白 ) Blu e ( 青 ) Shielded ( 隔離線 ) + A or + V 12V Connector of pipe / 接頭 TMF- - - Flow range Connector 050 50LPM 1/4"RC 080 80LPM 1/4"RC 100 100LPM 1/4"RC 200 200LPM 1/2"RC 300 300LPM 1/2"RC 400 400LPM 3/4"RC 500 500LPM 3/4"RC Brown 12VDC Black +(0~5V or 4~20mA) Blue White -(0~5V or 4~20mA) Notice of Installation / 安裝注意事項 1> Please clean the pipe line before installing the measuring unit. 安裝流量感測器前請先清潔管線 2> Please set enough length of straight pipe to avoid the vortex might be existed. (The minimum straight upstream must be over 10 x DN and downstream must be observed over 5 x DN) 安裝流量感測器時請在流量感測器前後保留適當長度的直管以防止產生窩流 3> Please select the suitable piping connector as specification. 請依流量感測器管牙規格選用適當的接管配件 4> Please install the measuring unit according the direction of arrow indicated on the body of the measuring unit. 請依流量感測器標示方向安裝 5> Please offer correct operating power supply:250ma / 12VDC ±10% 請提供正確的工作電源 :250mA / 12VDC ±10% 6> Please warm up the measuring unit at least 30 minutes to get the stable output signal. 本流量感測器須熱機 30 分鐘以上才會穩定 Range of transmitter / 傳送器轉換範圍 KTF series 050 080 100 200 300 400 500 Range(LPM) 0~50 0~ 80 0 ~ 100 0 ~ 200 0 ~ 300 0~400 0~500 Remarks 2> Range of transmitter:it is transmitted to 4.0 ~ 20.0 ma or 0.0 ~ 5.0 V 傳送範圍 : 依傳送範圍轉換成 4.0 ~ 20.0 ma 或 0.0 ~ 5.0 V 2> It is accepted to modify the range of transmitter on customer s demand. 可依客戶需求修改傳送器轉換範圍陽明電機股份有限公司 FOTEK CONTROLS CO.,LTD. Specification may be modified without notice in advance. Copy right @ fotek 2008/10/10 F-

規 格 書