GA-H61M-S2P-B3 Rev MC-61MS2PB-1002R

Transcription

1 GA-H61M-S2P-B3 Rev MC-61MS2PB-1002R

2 Motherboard GA-H61M-S2P-B3 Jun. 10, 2011 Motherboard GA-H61M-S2P-B3 Jun. 10, 2011

3 REV : X.XX.X REV : BIOS

4 GA-H61M-S2P-B3...5 GA-H61M-S2P-B BIOS BIOS MB Intelligent Tweaker(M.I.T.) (/) Standard CMOS Features (CMOS) Advanced BIOS Features (BIOS) Integrated Peripherals () Power Management Setup () PC Health Status () Load Fail-Safe Defaults () Load Optimized Defaults () Set Supervisor/User Password (/) Save & Exit Setup () Exit Without Saving ()

5 GA-H61M-S2P-B3 KB_MS COM ATX_12V LGA1155 VGA LPT CPU_FAN ATX R_USB Atheros AR8151 USB_LAN AUDIO PCIe to PCI Bridge BAT GA-H61M-S2P-B3 PCIEX16 PCI1 DDR3_1 DDR3_2 B_BIOS M_BIOS ite IT8728 PCI2 Intel H61 SATA2_0 CODEC PCIEX1 SATA2_1 F_AUDIO SYS_FAN F_USB2 F_USB1 CLR_CMOS F_PANEL SATA2_2 SATA2_3 GA-H61M-S2P-B SATA - 2 I/O

6 GA-H61M-S2P-B3 1 PCI Express x16 CPU CLK+/- (100 MHz) LGA1155 CPU DDR3 1333/1066/800 MHz Dual Channel Memory PCIe CLK (100 MHz) PCI Express Bus x16 DMI 2.0 FDI D-Sub Dual BIOS PCI Express Bus 4 SATA 3Gb/s PCIe CLK (100 MHz) x1 x1 Atheros AR8151 x1 PCIe to PCI Bridge Intel H61 8 USB 2.0/1.1 1 PCI Express x1 PCI Bus RJ45 LAN LPC Bus ite IT8728 LPT COM Port CODEC PS/2 KB/Mouse PCI CLK (33 MHz) 2 PCI MIC (Center/Subwoofer Speaker Out) Line Out (Front Speaker Out) Line In (Rear Speaker Out) - 6 -

7 1-1 (CPU) - 7 -

8 1-2 產品規格 中央處理器 (CPU) 支援LGA1155插槽處理器 Intel Core i7處理器 / Intel Core i5處理器 / Intel Core i3處理器 / Intel Pentium 處理器 / Intel Celeron 處理器 (請至技嘉網站查詢有關支援的處理器列表) L3快取記憶體取決於CPU 晶片組 Intel H61 高速晶片組 記憶體 2個1.5V DDR3 DIMM插槽 最高支援到16 GB * 由於Windows 32-bit作業系統的限制 若安裝超過4 GB的實體記憶體時 實際上顯示之記憶體容量將少於4 GB 支援雙通道記憶體技術 支援DDR3 1333/1066/800 MHz 支援non-ECC記憶體 (請至技嘉網站查詢有關支援的記憶體模組速度及列表) 顯示功能 內建於晶片組 - 1個D-Sub插座 音效 內建VIA VT1708晶片 支援High Definition Audio 支援2/4/5.1/7.1聲道 * 若要啟動7.1聲道音效輸出 必須使用HD (High Definition 高傳真)音效模 組的前方面板音源輸出接出 並透過音效軟體選擇多聲道音效功能 網路 內建1個Atheros AR8151晶片(10/100/1000 Mbit) 擴充槽 1個PCI Express x16插槽 支援x16運作規格 1個PCI Express x1插槽 (所有PCI Express插槽皆支援PCI Express 2.0) 2個PCI 插槽 儲存裝置介面 內建於晶片組 - 4個SATA 3Gb/s插座 可連接4個SATA 3Gb/s裝置 USB 內建於晶片組 - 最多支援8個USB 2.0/1.1連接埠(4個在後方面板 4個需經由排線從 主機板內USB插座接出) 內接插座 1個24-pin ATX主電源插座 1個4-pin ATX 12V電源插座 4個SATA 3Gb/s插座 1個CPU風扇插座 1個系統風扇插座 1個前端控制面板插座 1個前端音源插座 2個USB 2.0/1.1插座 1個清除CMOS資料功能接腳 -8-

9 後方面板裝置 連接插座 1個PS/2鍵盤插座 1個PS/2滑鼠插座 1個並列埠 1個串列埠 1個D-Sub插座 4個USB 2.0/1.1連接埠 1個RJ-45埠 3個音源接頭(音源輸入/音源輸出/麥克風) I/O控制器 內建iTE IT8728晶片 硬體監控 系統電壓偵測 CPU/系統溫度偵測 CPU/系統風扇轉速偵測 CPU/系統智慧風扇控制 * 是否支援C PU/系統智慧風扇控制功能會依不同的C PU/系統散熱風扇而 定 BIOS 附加工具程式 2個32 Mbit flash 使用經授權AWARD BIOS 支援DualBIOS PnP 1.0a DMI 2.0 SM BIOS 2.4 ACPI 1.0b 支援@BIOS 支援Q-Flash 支援Xpress BIOS Rescue 支援Download Center 支援Xpress Install 支援Xpress Recovery2 支援EasyTune * EasyTune可使用的功能會因不同主機板而有所差異 支援Smart 6 支援Auto Green 支援ON/OFF Charge 支援Cloud OC 支援3TB+ Unlock 支援Q-Share 附贈軟體 Norton Internet Security (OEM版本) 作業系統 支援Microsoft Windows 7/Vista/XP 規格 Micro ATX規格 24.4公分x 20公分 * 產品規格或相關資訊技嘉保留修改之權利 有任何修改或變更時 恕不另行通知 -9-

10 1-3 (CPU) CPU (CPU) CPU CPUCPUCPU( CPUCPU) CPU CPUCPU CPU CPU (CPU) A. CPUCPU LGA1155 CPU LGA1155 CPU CPU

11 1-4 () 2DDR3(Dual Channel Technology) BIOS 2DDR3(Channel) A (Channel A)DDR3_1 (1) B (Channel B)DDR3_2 (2) DDR3_1 DDR3_2 CPU 1. DDR3 2. DDR3( )

12 1-6 後方裝置插座介紹 PS/2 鍵盤及PS/2滑鼠插座 連接PS/2鍵盤及滑鼠至此插座 在上面的是滑鼠插座(綠色) 下面的是鍵盤插座(紫色) 並列埠 也稱為印表機連接埠 可連接印表機 掃描器等週邊設備 串列埠 串列埠可連接滑鼠 數據機等設備 D-Sub插座 此插座支援15-pin的D-Sub接頭 您可以連接支援D-Sub接頭的螢幕至此插座 USB 2.0/1.1 連接埠 此連接埠支援USB 2.0/1.1規格 您可以連接USB裝置至此連接埠 例如 USB鍵盤/滑鼠 USB 印表機 USB隨身碟 等 網路插座(RJ-45) 此網路插座是超高速乙太網路(Gigabit Ethernet) 提供連線至網際網路 傳輸速率最高每 秒可達1 GB (1 Gbps) 網路插座指示燈說明如下 連線/速度 指示燈 運作指示燈 網路插座 連線/速度指示燈 燈號狀態 亮橘色燈 亮綠色燈 燈滅 運作指示燈 說明 傳輸速率1 Gbps 傳輸速率100 Mbps 傳輸速率10 Mbps 燈號狀態 閃爍 燈滅 說明 傳輸資料中 無傳輸資料 音源輸入(藍色) 此插孔預設值為音源輸入孔 外接光碟機 隨身聽及其他音源輸入裝置可以接至此插孔 音源輸出(綠色) 此插孔預設值為音源輸出孔 在使用耳機或2聲道音效輸出時 可以接至此插孔來輸出聲 音 在4/5.1/7.1聲道音效輸出模式中 可提供前置主聲道音效輸出 麥克風(粉紅色) 此插孔為麥克風連接孔 麥克風必須接至此插孔 若要啟動7.1聲道音效輸出 必須使用HD (High Definition 高傳真)音效模組的前方面板音 源輸出接出 並透過音效軟體選擇多聲道音效功能 要移除連接於各插座上的連接線時 請先移除設備端的接頭 再移除連接至主機板 端的接頭 移除連接線時 請直接拔出 切勿左右搖晃接頭 以免造成接頭內的線路短路

13 ) ATX_12V 2) ATX 3) CPU_FAN 4) SYS_FAN 5) SATA2_0/1/2/3 6) F_PANEL 7) F_AUDIO 8) F_USB1/F_USB2 9) CLR_CMOS 10) BAT

14 1/2) ATX_12V/ATX (2x2-pin 12V2x12-pin) 12VCPU12V (500) ATX_12V V ATX_12V 4 +12V ATX V V 2 3.3V 14-12V V 16 PS_ON (soft On/Off) V Power Good 20-5V 9 5VSB (stand by +5V) 21 +5V V 22 +5V V (2x12-pin 23 +5V (2x12-pin 1 13 ) V (2x12-pin ) 24 (2x12-pin ATX ) )

15 3/4) CPU_FAN/SYS_FAN (散熱風扇電源插座) 此主機板的CPU_FAN及SYS_FAN散熱風扇電源接頭為4-pin 電源接頭皆有防呆設計 安裝時 請注意方向(黑色線為接地線) 此主機板支援CPU風扇控制功能 須使用具有轉速控制設計 的CPU散熱風扇才能使用此功能 建議您於機殼內加裝系統散熱風扇 以達到最佳的散熱效 能 CPU_FAN 接腳 CPU_FAN 定義 接地腳 +12V /速度控制腳 轉速偵測腳 速度控制腳 SYS_FAN 接腳 定義 1 接地腳 2 +12V /速度控制腳 3 轉速偵測腳 DEBUG 4PORT 保留 1 SYS_FAN DEBUG 請務必接上散熱風扇的電源插座 以避免CPU及系統處於過熱的工作環境 若 PORT 溫度過高可能導致CPU或是系統當機 DEBUG 這些散熱風扇電源插座並非跳線 請勿放置跳帽在針腳上 PORT DEBUG PORT 5) SATA2_0/1/2/3 (SATA 3Gb/s插座) 這些SATA插座支援SATA 3Gb/s規格 並可相容於SATA 1.5Gb/s規格 一個SATA插座只能連接 一個SATA裝置 SATA2_0 1 7 SATA2_1 1 7 SATA2_2 1 7 SATA2_3 1 7 接腳 定義 接地腳 TXP TXN 接地腳 RXN RXP 接地腳 請將SATA排線的L型接頭連接至 SATA硬碟

16 6) F_PANEL () / (+/-) // SPEAK- HD+ HD- RES- RES+ CI- CI+ PWR+ MSG+ PW+ SPEAK+ PWR- MSG- PW- MSG/PWR// S0 S1 S3/S4/S5 (S1) (S3/S4)(S5) PW BIOS (BIOSPower Management Setup) SPEAK HD RES (Reset) CI /

17 7) F_AUDIO (前端音源插座) 此前端音源插座可以支援HD (High Definition 高傳真)及AC'97音效模組 您可以連接機殼 前方面板的音效模組至此插座 安裝前請先確認音效模組的接腳定義是否與插座吻合 若安裝不當可能造成設備無法使用甚至損毀 HD 接頭定義 接腳 定義 1 MIC2_L 2 接地腳 3 MIC2_R 4 -ACZ_DET 5 LINE2_R 6 接地腳 7 FAUDIO_JD 8 無接腳 9 LINE2_L 10 接地腳 AC'97接頭定義 接腳 定義 1 MIC 2 接地腳 3 MIC電源 4 無作用 5 Line Out (R) 6 無作用 7 無作用 8 無接腳 9 Line Out (L) 10 無作用 機殼前方面板的音效輸出預設值為支援HD音效模組 機殼前方面板的音源插座與後方的音源插座會同時發聲 有部份市售機殼的前方音源連接線並非模組化 而各機殼的音源連接線定義或 有不同 如何連接請洽機殼製造商 8) F_USB1/F_USB2 (USB 2.0/1.1連接埠擴充插座) 此插座支援USB 2.0/1.1規格 透過USB擴充擋板 一個插座可以接出兩個USB連接埠 USB擴充擋板為選購配件 您可以聯絡當地代理商購買 接腳 定義 電源 (5V) 電源 (5V) USB DXUSB DYUSB DX+ USB DY+ 接地腳 接地腳 無接腳 無作用 請勿將2x5-pin的IEEE 1394擴充擋板連接至USB連接埠擴充插座 連接USB擴充擋板前 請務必將電腦的電源關閉 並且將電源線自插座中拔 除 以免造成USB擴充擋板的毀損

18 9) CLR_CMOS (清除CMOS資料功能接腳) 利用此接腳可以將主機板的CMOS資料(例如 日期及BIOS設定)清除 回到出廠設定值 如果 您要使用清除CMOS資料時 請使用跳帽將針腳短路數秒鐘 或使用如螺絲起子之類的金屬 物同時碰觸兩支針腳數秒鐘 開路 一般運作 短路 清除CMOS資料 清除CMOS資料前 請務必關閉電腦的電源並拔除電源線 清除CMOS資料後在啟動電腦之前 請記得移除跳帽 若未移除跳帽就開機 會造成主機板的損毀 開機後請進入BIOS載入出廠預設值(Load Optimized Defaults)或自行輸入設定值(請 參考第二章 BIOS組態設定 的說明) 10) BAT (電池) 此電池提供電腦系統於關閉電源後仍能記憶CMOS資料(例如 日期及BIOS設定)所需的電力 當此電池的電力不足時 會造成CMOS的資料錯誤或遺失 因此當電池電力不足時必須更換 您也可以利用拔除電池來清除CMOS資料 1. 請先關閉電腦 並拔除電源線 2. 小心地將電池從電池座中取出 等候約一分鐘 (或是使用 如螺絲起子之類的金屬物碰觸電池座的正負極 造成其短路 約五秒鐘) 3. 再將電池裝回 4. 接上電源線並重新開機 更換電池前 請務必關閉電腦的電源並拔除電源線 更換電池時請更換相同型號的電池 不正確的型號可能引起爆炸的危險 若無法自行更換電池或不確定電池型號時 請聯絡購買店家或代理商 安裝電池時 請注意電池上的正(+)負(-)極(正極須向上) 更換下來的舊電池須依當地法規處理

19 第二章 BIOS 組態設定 記憶CMOS資料所需的電力由主機板上的鋰電池供應 因此當系統電源關閉時 這些資料並不會遺 失 當下次再開啟電源時 系統便能讀取這些設定資料 若要進入BIOS設定程式 電源開啟後 BIOS在進行POST時 按下<Delete>鍵便可進入BIOS設定程 式主畫面 如果需要進階的BIOS設定 請在BIOS設定程式主畫面按下<Ctrl> + <F1>鍵即可 當您需要更新BIOS 可以使用技嘉獨特的BIOS更新方法 Q-Flash或@BIOS Q-Flash 是可在BIOS設定程式內更新BIOS的軟體 讓使用者不需進入作業系統 就可以輕鬆 是可在Windows作業系統內更新BIOS的軟體 透過與網際網路的連結 下載及更新最 新版本的BIOS 更新BIOS有其潛在的風險 如果您使用目前版本的BIOS沒有問題 我們建議您不要任 意更新BIOS 如需更新BIOS 請小心的執行 以避免不當的操作而造成系統毀損 我們不建議您隨意變更BIOS設定程式的設定值 因為可能因此造成系統不穩定或其它 不可預期的結果 如果因設定錯誤造成系統不穩定或不開機時 請試著清除CMOS設 定值資料 將BIOS設定回復至出廠預設值 (清除CMOS設定值 請參考第二章 Load Optimized Defaults 的說明 或是參考第一章 電池 或 CLR_CMOS接腳 的說明 ) 2-1 開機畫面 電源開啟後 會看到如以下的畫面 A. LOGO畫面(預設值): 功能鍵 B. POST畫面 Award Modular BIOS v6.00pg Copyright (C) , Award Software, Inc. H61M-S2P-B3 E2 主機板型號 BIOS版本.... <DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash 05/31/2011-H61-7A89WG0SC 功能鍵

20 2-2 BIOS BIOS <Enter> (BIOSE2) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Change CPU's Clock & Voltage <Ctrl> + <F1> Load Optimized Defaults BIOSBIOSBIOS <F11><F12>() F11Save CMOS to BIOS BIOSCMOS(Profile) (Profile 1-8)(<SPACE>) <Enter> F12Load CMOS from BIOS BIOSCMOS BIOS<Enter>

21 2-3 MB Intelligent Tweaker(M.I.T.) (/) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) } M.I.T Current Status [Press Enter] } Advanced Frequency Settings [Press Enter] } Advanced Memory Settings [Press Enter] } Advanced Voltage Settings [Press Enter] } Miscellaneous Settings [Press Enter] Item Help Menu Level BIOS Version BCLK CPU Frequency Memory Frequency Total Memory Size CPU Temperature E MHz MHz MHz 1024 MB 33 o C Vcore DRAM Voltage V V : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CPU (CMOSBIOS ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) } M.I.T Current Status [Press Enter] } Advanced Frequency Settings [Press Enter] } Advanced Memory Settings [Press Enter] } Advanced Voltage Settings [Press Enter] } Miscellaneous Settings [Press Enter] Item Help Menu Level BIOS Version BCLK CPU Frequency Memory Frequency Total Memory Size CPU Temperature E MHz MHz MHz 1024 MB 33 o C Vcore DRAM Voltage V V : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults BIOSCPUCPUCPUVcore

22 M.I.T. Current Status CPU/ Advanced Frequency Settings CMOS Setup Utility-Copyright (C) Award Software Advanced Frequency Settings CPU Clock Ratio [31X] CPU Frequency 3.10GHz (100x31) } Advanced CPU Core Features [Press Enter] >>>>> Standard Clock Control System Memory Multiplier (SPD) [Auto] Memory Frequency (Mhz) Internal Graphics Clock 1100 [Auto] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Advanced CPU Core Features CMOS Setup Utility-Copyright (C) Award Software Advanced CPU Core Features CPU Clock Ratio [31X] CPU Frequency 3.10GHz (100x31) Intel(R) Turbo Boost Tech. () [Auto] -Turbo Ratio(1-Core) () 34 Auto -Turbo Ratio(2-Core) () 33 Auto -Turbo Ratio(3-Core) () 33 Auto -Turbo Ratio(4-Core) () 32 Auto -Turbo Power Limit(Watts) 95 [Auto] -Core Current Limit(Amps) 97 [Auto] CPU Cores Enabled () [All] CPU Multi-Threading () [Enabled] CPU Enhanced Halt (C1E) () [Auto] C3/C6 State Support () [Auto] CPU Thermal Monitor () [Auto] CPU EIST Function () [Auto] Bi-Directional PROCHOT () [Auto] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CPU Clock Ratio (CPU) CPUCPU CPU Frequency (CPU) CPU () CPUIntel CPUIntel

23 Intel(R) Turbo Boost Tech. () Intel CPUAutoBIOS (Auto) Turbo Ratio (1-Core)/(2-Core)/(3-Core)/(4-Core) () C PUC PU( Auto) Turbo Power Limit (Watts) CPUCPUCPU AutoBIOSC PU (Auto) Core Current Limit (Amps) CPUCPUCPU AutoBIOSCPU( Auto) CPU Cores Enabled (CPU) () Intel CPUCPU All CPU() 1 CPU 2 CPU 3 CPU CPU Multi-Threading (CPU) () Intel CPUCPU (Enabled) CPU Enhanced Halt (C1E) (Intel C1E) () Intel CPU Enhanced Halt (C1E) (CPU )C P U AutoBIOS(Auto) C3/C6 State Support () C P UC3/C6 C P UC1 AutoBIOS(Auto) CPU Thermal Monitor (Intel TM) () Intel Thermal Monitor (CPU) CPUCPUAutoBIOS (Auto) CPU EIST Function (Intel EIST) () Enhanced Intel Speed Step (EIST)EISTCPU CPUAuto BIOS(Auto) () CPUIntel CPUIntel

24 Bi-Directional PROCHOT () PROCHOT Auto BIOS() Enabled CPUPROCHOTCPU Disabled CPUPROCHOT >>>>> Standard Clock Control System Memory Multiplier (SPD) () AutoBIOSSPD( Auto) Memory Frequency (Mhz) () System Memory Multiplier Internal Graphics Clock () 400 MHz3000 MHz(Auto) Advanced Memory Settings CMOS Setup Utility-Copyright (C) Award Software Advanced Memory Settings System Memory Multiplier (SPD) [Auto] Memory Frequency (Mhz) Performance Enhance [Turbo] DRAM Timing Selectable (SPD) [Auto] Profile DDR Voltage 1.5V Profile VTT Voltage 1.05V x Channel Interleaving Auto x Rank Interleaving Auto >>>>> Channel A } Channel A Timing Settings [Press Enter] >>>>> Channel B } Channel B Timing Settings [Press Enter] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults System Memory Multiplier (SPD) ()Memory Frequency(Mhz) ( ) Advanced Frequency Settings Performance Enhance () Standard Turbo () Extreme () CPUIntel CPUIntel

25 DRAM Timing Selectable (SPD) QuickExpertChannel InterleavingRank InterleavingChannel A Timing SettingsChannel B Timing Settings Auto ()QuickExpert Profile DDR Voltage 1.5V Profile VTT Voltage CPU Channel Interleaving AutoBIOS (Auto) Rank Interleaving rank rankautobios (Auto) >>>>> Channel A/B Timing Settings CMOS Setup Utility-Copyright (C) Award Software Channel A Timing Settings >>>>> Channel A Standard Timing Control x CAS Latency Time 9 Auto x trcd 9 Auto x trp 9 Auto x tras 24 Auto >>>>> Channel A Advanced Timing Control x trc 33 Auto x trrd 4 Auto x twtr 5 Auto x twr 10 Auto x twtp 21 Auto x twl 7 Auto x trfc 74 Auto x trtp 5 Auto x tfaw 20 Auto x Command Rate (CMD) 1 Auto >>>>> Channel A Misc Timing Control x IO Latency 1 Auto x Round Trip Latency 34 Auto : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults >>>>> Channel A/B Standard Timing Control CAS Latency Time Auto ()5~15 trcd Auto ()1~15 trp Auto ()1~15 tras Auto ()1~40 >>>>> Channel A/B Advanced Timing Control trc Auto ()1~ Item Help Menu Level

26 trrd Auto ()1~15 twtr Auto ()1~15 twr Auto ()1~16 twtp Auto ()1~31 twl Auto ()1~12 trfc Auto ()1~255 trtp Auto ()1~15 tfaw Auto ()1~63 Command Rate(CMD) Auto ()1~3 >>>>> Channel A/B Misc Timing Control IO Latency Auto ()1~31 Round Trip Latency Auto ()1~255 Advanced Voltage Settings CMOS Setup Utility-Copyright (C) Award Software Advanced Voltage Settings ****** Mother Board Voltage Control ****** Voltage Types Normal Current >>> CPU Dynamic Vcore(DVID) V [Auto] Graphics DVID V [Auto] DRAM Voltage 1.500V [Auto] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults >>> CPU Dynamic Vcore (DVID) Auto Graphics DVID Auto

27 DRAM Voltage Auto Miscellaneous Settings CMOS Setup Utility-Copyright (C) Award Software Miscellaneous Settings Isochronous Support Virtualization Technology () [Enabled] [Enabled] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Isochronous Support CPU(Enabled) Virtualization Technology (Intel) () Intel Virtualization Technology ()Intel (Enabled) () CPUIntel CPU Intel 2-4 Standard CMOS Features (CMOS) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Date (mm:dd:yy) Thu, Jun Time (hh:mm:ss) 22:31:24 } IDE Channel 0 Master [None] } IDE Channel 1 Master [None] } IDE Channel 2 Master [None] } IDE Channel 3 Master [None] Item Help Menu Level Halt On Base Memory Extended Memory Total Memory [All, But Keyboard] 640K 941M 950M : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) () Time (hh:mm:ss) () IDE Channel 0, 1 Master (SATA) IDE Channel 0, 1 Master SATA None SATANone Auto BIOSPOSTSATA()

28 Manual Access Mode ()CHS Access Mode Auto ()CHSLBALarge IDE Channel 2, 3, Master (SATA) Extended IDE Drive SATA Auto BIOSPOSTSATA() None SATANone Access Mode Auto ()Large ( ) Capacity Cylinder Head Precomp (Precompensation) Landing Zone Sector Halt On () POST All ErrorsNo ErrorsAll, But Keyboard () Memory () BIOSPOST (Power On Self Test) 2-5 Advanced BIOS Features (BIOS) CMOS Setup Utility-Copyright (C) Award Software Advanced BIOS Features } Hard Disk Boot Priority [Press Enter] Quick Boot [Disabled] EFI CD/DVD Boot Option [Auto] First Boot Device [Hard Disk] Second Boot Device [CDROM] Third Boot Device [USB-FDD] Password Check [Setup] HDD S.M.A.R.T. Capability [Disabled] Limit CPUID Max. to 3 () [Disabled] No-Execute Memory Protect () [Enabled] Delay For HDD (Secs) [0] Full Screen LOGO Show [Enabled] Init Display First [PCIE x16] Onboard VGA [Enable If No Ext PEG] On-Chip Frame Buffer Size [64MB+2MB for GTT] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Hard Disk Boot Priority <Enter><h><i><+>/<PageUp> <->/<PageDown><Esc> () CPUIntel CPU Intel

29 Quick Boot Smart 6 SMART QuickBoot (Disabled) EFI CD/DVD Boot Option 2.2 TBEFI GPT(Windows 7 64-bitWindows Server bit )AutoBIOS(: Auto) First/Second/Third Boot Device (//) <h><i><enter>hard DiskCDROMUSB-FDDUSB-ZIPUSB-CDROMUSB- HDDLegacy LANDisabled () Password Check () BIOS BIOSSet Supervisor/User Password Setup BIOS() System BIOS HDD S.M.A.R.T. Capability () S.M.A.R.T. (Disabled) Limit CPUID Max. to 3 (CPUID) () CPUID Windows XPDisabled Windows NT 4.0Enabled(Disabled) No-Execute Memory Protect (Intel) () Intel Execute Disable Bit (buffer overflow)(enabled) Delay For HDD (Secs) () 0~15(0) Full Screen LOGO Show () LogoDisabled POST(Enabled) Init Display First () PCIPCI Express PCI PCI Onboard PCIE x16 PCIEX16() Onboard VGA () Enable If No Ext PEG PCI Express() () CPUIntel CPU Intel

30 Always Enable PCI Express Always Enable On-Chip Frame Buffer Size () Frame Buffer Size MS-DOS 32MB+2MB for GTT~480MB+2MB for GTT(64MB+2MB for GTT) 2-6 Integrated Peripherals () CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals SATA AHCI Mode SATA Port0-1 Native Mode USB Controllers USB Legacy Function USB Storage Function Azalia Codec Onboard H/W LAN Onboard LAN Boot ROM Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode [IDE] [Enabled] [Enabled] [Enabled] [Enabled] [Auto] [Enabled] [Disabled] [3F8/IRQ4] [378/IRQ7] [SPP] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults SATA AHCI Mode (Intel H61) Intel H61SATAAHCI IDE SATAIDE() AHCI SATAAHCIAHCI (Advanced Host Controller Interface) Serial ATANative Command Queuing (Hot Plug) SATA Port0-1 Native Mode (Intel H61SATANative IDE) Intel H61SATA Disabled SATALegacy IDE Legacy IDEIRQ Native IDEDisabled Enabled SATANative IDENative IDE Enabled() USB Controllers (USB ) USB(Enabled) USB USB Legacy Function (USB) MS-DOSUSB(Enabled) USB Storage Function (USB) POSTUSBUSBUSB( Enabled) Azalia Codec () (Auto) Disabled

31 Onboard H/W LAN () (Enabled) Disabled Onboard LAN Boot ROM () Boot ROM(Disabled) Onboard Serial Port 1 () AutoBIOSDisabledBIOS Auto3F8/IRQ4 ()2F8/IRQ33E8/IRQ42E8/IRQ3Disabled Onboard Parallel Port () DisabledBIOS 378/IRQ7 ()278/IRQ53BC/IRQ7Disabled Parallel Port Mode () SPP ()EPPECPECP+EPP 2-7 Power Management Setup () CMOS Setup Utility-Copyright (C) Award Software Power Management Setup ACPI Suspend Type [S3(STR)] Soft-Off by PWR-BTTN [Instant-Off] PME Event Wake Up [Enabled] Power On by Ring [Enabled] Resume by Alarm [Disabled] x Date (of Month) Alarm Everyday x Time (hh:mm:ss) Alarm 0 : 0 : 0 HPET Support () [Enabled] HPET Mode () [32-bit mode] Power On By Mouse [Disabled] Power On By Keyboard [Disabled] x KB Power ON Password Enter AC Back Function [Soft-Off] ErP Support [Disabled] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ACPI Suspend Type () S1(POS) ACPIS1 (POSPower On Suspend)S1 S3(STR) ACPIS3 (STRSuspend To RAM)()S3 S1 Soft-Off by PWR-BTTN () MS-DOS Instant-Off () Delay 4 Sec. 44 () Windows 7/Vista

32 PME Event Wake Up () ACPIPCIPCIe/ +5VSB1ATX (Enabled) Power On by Ring () ACPI /(Enabled) Resume by Alarm () (Disabled) Date (of Month) Alarm: Everyday ()1~31 () Time (hh: mm: ss) Alarm: (0~23) : (0~59) : (0~59) () HPET Support () Windows 7/VistaHigh Precision Event Timer (HPET )(Enabled) HPET Mode () Windows 7/VistaHPET32-bit Windows 7/Vista 32-bit mode64-bit Windows 7/Vista 64-bit modehpet Support(32-bit mode) Power On By Mouse () PS/2/ +5VSB1ATX Disabled () Double Click PS/2 Power On By Keyboard () PS/2/ +5VSB1ATX Disabled () Password 1~5 Keyboard 98 Windows 98 KB Power ON Password () Power On by KeyboardPassword <Enter>1~5<Enter> <Enter> <Enter> <Enter> AC Back Function () Soft-Off ( ) Full-On Memory () Windows 7/Vista

33 ErP Support (S5)1(Disabled) 2-8 PC Health Status () CMOS Setup Utility-Copyright (C) Award Software PC Health Status Reset Case Open Status [Disabled] Case Opened No Vcore 1.200V DDR15V 1.516V +12V V Vtt 1.076V Current System Temperature 31 o C Current CPU Temperature 33 o C Current CPU FAN Speed 2027 RPM Current SYSTEM FAN Speed 0 RPM CPU Warning Temperature [Disabled] CPU FAN Fail Warning [Disabled] SYSTEM FAN Fail Warning [Disabled] CPU Smart FAN Control [Normal] x Slope PWM 1.75 PWM value / o C CPU Smart FAN Mode [Auto] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Reset Case Open Status () Disabled () Enabled Case Opened () CI NoYes Reset Case Open StatusEnabled Current Voltage(V) Vcore/DDR15V/+12V/Vtt () Current System/CPU Temperature (/CPU) /CPU Current CPU/SYSTEM FAN Speed (RPM) () CPU/ CPU Warning Temperature (CPU) C PU Disabled (CPU)60 o C/ 140 o F70 o C/158 o F 80 o C/176 o F90 o C/194 o F CPU/SYSTEM FAN Fail Warning (CPU/) (Disabled)

34 CPU Smart FAN Control (CPU) CPUCPU Normal CPUCPUEasyTune () Silent CPU Manual Slope PWMCPU Disabled CPU Slope PWM (CPU) CPUCPU Smart FAN ControlManual 0.75 PWM value / o C ~ 2.50 PWM value / o C CPU Smart FAN Mode (CPU) CPU Smart FAN Control Auto CPU() Voltage 3-pinCPUVoltage PWM 4-pinCPUPWM 3-pin4-pinCPUVoltage 4-pin CPUIntel PWMPWM 2-9 Load Fail-Safe Defaults () CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Fail-Safe Defaults Save (Y/N)? & Exit N Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Load Fail-Safe Defaults <Enter><Y>BIOS BIOS

35 2-10 Load Optimized Defaults () CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Optimized Defaults Save (Y/N)? & Exit N Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Load Optimized Defaults <Enter><Y>BIOSBIOS BIOSCMOS 2-11 Set Supervisor/User Password (/) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management SetupEnter Password: PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Change/Set/Disable Password <Enter>8<Enter> BIOS Supervisor () Advanced BIOS FeaturesPassword CheckSetupBIOS SystemBIOS User () Advanced BIOS FeaturesPassword CheckSystemBIOS BIOS BIOS <Enter>BIOS <Enter>PASSWORD DISABLEDBIOS

36 2-12 Save & Exit Setup () CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Save to CMOS and EXIT (Y/N)? Y Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Save Data to CMOS <Enter><Y>BIOS <N><Esc> 2-13 Exit Without Saving () CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Quit Without Saving (Y/N)? N Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to BIOS F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS Abandon all Data <Enter><Y>BIOSBIOS <N><Esc>

37 ( Run.exe) Xpress Install Xpress InstallXpress Install

38 - 38 -

39 1. () SN SN (11) () a. f. b. g. c. h. d. i. (RAMVGAUSB) e (V1.1)

40 (2) (2) ~ 09:30 ~ 08:30 09:30 ~ 05:30 / () () ()