CyberScan ph/ion 510 ph/ion/mv 68X090811 ver 1.0 12/99 Technology Made Easy
CyberScan ph 510 ph/mv/ CyberScan Ion 510 Ion/pH/mV/ PC510 : PC510 Eutech/ Oakton 65 778-6876 Eutech Eutech 2002 Eutech 1.0
1...3 1.1 CyberScan...3 1.2...3 1.3...3 1.4...4 2...4 2.1...5 2.2...5 2.3 A/C...5 2.4...5 2.5...5 2.6...6 3...7 3.1 ph...7 3.2 ( Ion 510)...9 3.3 mv...10 3.4...11 4...12 4.1 (ATC)...12 4.2 (MTC)...12 4.3...12 4.4...13 4.5...13 5...15 5.1 P1.0...15 5.2 P2.0...16 5.3 P3.0 ph...17 5.4 P4.0...17 6 ph...18 6.1...18 6.2...18 6.3...18 6.4 ph...19 7...20 7.1...20 7.2...20 8...21 8.1 ph...21 8.2 ph...21 8.3 ph...21 8.4...22 8.5 Specifications...24 8.6...24 2
1 1.1 CyberScan Eutech CyberScan 510 ASIC 50 CyberScan ph510 ph mv CyberScan lon510 mv ppm ph mv ph 1.2 CyberScan 510 ph mv ppm SETUP The meter is in SETUP mode. MEAS- The instrument is in the measurement mode. CAL- The instrument is in the calibration mode. MEM- Data is stored into memory READY- The measured value has stabilized. HOLD- The displayed value has been frozen. ERR - An error in operation has occured. Buffer - Prompts user to select buffer during calibration, or indicates buffer error when flashing together with the ERR annunciator. SETUP READY HOLD ON OFF MEAS MEM ERR ELECTRODE- indicates electrode error when it appears with ERR. AM PM CAL MEM R.mV ph ppm C F ph ATC ph Indicates buffer values of respective USA or NIST buffer option set. Shows the respective mode of operation. ATC (Automatic Temperature Compensation) activated. If ATC is not displayed, temperature probe is not connected. In this case the Manual Temperature Compensation is activated. 1.3 / ON/OFF CAL/MEAS SETUP CAL/MEAS 3
MODE MI/ MR/ HOLD ENTER ph/mv/ / ph ph MI mv SETUP MR mv SETUP ph 5 1.4 CyberScan 510 ATC INPUT REF REC GND DC 30K BNC BNC ph ORP ISE ph ISE / 2 BNC 4
2.1 BNC INPUT BNC ph ORP ISE REF 2.2 ATC 2.3 A/C AC/DC DC 2.4 REC GND Sensor electrode Chart recorder Temp. probe Separate ref. electrode Ground AC/DC Adapter 2.5 Bottom of Meter ph/lon : 5
: 2.6 2.6.1 ON OFF 2.6.2 CyberScan ph 510 p mv ORP CyberScan lon 510 lon ph mv MODE ph [ph] [ ] [ppm] [mv] 2.6.3 5.4 ph 2.6.4 ph USA NISTpH USA NIST 5.3 P3.0 ph 8.4.1 : 6 6
3 3.1 ph CyberScan 510 3 NIST 3 USA ph4.01 ph 7 ph 10.01 NIST ph 4.01 ph6.86 ph 9.18 ATC ATC ph ph7 Eutech ph4 7 10 1. ON/OFF ph MODE ph 2. MEAS ph o C ATC 3. ph 4. ph7.00 5. 6. CAL/MEAS ph [CAL] ph ph : SETUP USA ph4.01 7.00 10.01 NIST ph4.01 6.86 9.18 : ENTER CAL/MEAS 1: 7
7. [READY] 2: 8. ENTER CAL/MEAS 9. ENTER 10. CAL/MEAS 1 11. 12 3: 2 12. ph ph4.01 ph 13. ph [READY] ( 3) 14. ENYER 4: 3 15. CAL/MEAS 16. 17 17. : ph10.01 ph 18. ph [READY] ERR 4 CAL/MEAS 19. ENTER ph USA 4.01 ±1.00 7.00 ±1.50 10.01 ±1.00 NIST 4.01 ±1.00 6.86 ±1.25 9.18 ±1.00 8
3.2 ( Ion 510) CyberScan lon 510 ( ) 0.10 1.0 10.0 100.0ppm 0.10 1.0 10.0 100.0 Er2 Er4 ISE 15mV/decade 90mV/decade Er3 Figure7 ISE ISE ph mv 1. BNC ON 2. MODE --- 3. CAL [CAL] 0.10 mv 4. 0.10ppm 1.0ppm 10.0ppm 5. 0.10ppm mv [READY] 6. ENTER 5 1.0ppm 1.0ppm 7. [READY] ENTER 10.0ppm CAL/MEAS SLO [mv] mv 6 Er3 5: 9
: 8. [READY] ENTER SLO [mv] 0.1 1 10ppm mv Figure 6 1 10 100ppm 1 10ppm 10 100ppm :, : 6: mv 7: Er3 3.3 mv 1. MODE mv [mv] 2. CAL/MEAS [CAL.] mv mv : mv mv - 1999mV 1999mV 1mV -199.9mV 199.9mV 0.1mV 3. mv 4. ENTER mv [R.mV] : mv mv 10
3.4 ATC [ATC] 1. 2. ph 3. mv MODE ph 4. CAL/MEAS ph 5. MODE 6. 5 0.1 7. ENTER ph 11
4 4.1 (ATC) ATC 2.2 [ATC] : 4.2 (MTC) : 1. MODE ph 2. CAL/MEAS ph [CAL] 3. ph MODE 25.0 25. 0 4. 5. 4 6. ENTER ph 7. 6 ENTER CAL/MEAS : ph 4.3 1. EC-RE005 30 6 2. ON [MEAS] ATC 4.2 3. 4. [READY] 0.01pH 5. ph510 ph mv lon510 ph mv lon MODE 12
4.4 MI HOLD [HOLD] HOLD [HOLD] 4.5 50 (LIFO) ph 510 : ph mv ( mv) Ion 510 : ph mv ( mv) ion mv 50 (LIFO) HOLD [HOLD] : 1. MI 2. [MEM] STO 3. MI 13
1. MR MEM LOC 2. ENTER 3. LOC3 LOC5 LOC3 ENTER 4. ENTER LOC2 5. MEAS P1.0 14
5 SETUP P1.0: (Clr) P2.0: (ELE) P3.0: (buf) P4.0: (rst) : 1. 2. MODE ON [SETUP] [SETUP] : CAL/MEAS CAL/MEAS 5.1 P1.0 NO 1. P1.0 CLr P1.0 2. ENTER NO YES 3. NO YES 4. ENTER CAL/MEAS 15
5.2 P2.0 ph in mv % - in mv mv in mv - 1., P1.0 2. ELE P2.0 3. ENTER P2.0 P2.1 P2.0 ph P2.1 mv ENTER P2.2 8 P2.2 % mv P2.1 mv 9 P2.1 10 4. P2.0 ENTER ELE P2.0 CAL/MEAS Figure 8: slope in % Figure 9: mv offset Figure 10: Average slope (mv) 16
5.3 P3.0 ph USA NIST 1. P1.0 2. Buf P3.0 3. ENTER P3.0 USA nst USA 4. USA 4.01, 7.00 10.01 nst 4.01, 6.86 9.18 5. ENTER P3.0 6. P3.0 CAL/MEAS 5.4 P4.0 NO 1. P1.0 2. rst P4.0 ph mv 3. ENTER P4.0 NO 4. NO YES ph mv 5. YES ENTER : YES ENTER NIST USA 17
6 ph ph PH 6.3 6.1 Eutech EC-RE005 ph7 6.2 a) b) c) 6.2.1 ( ) ph 1. 2. 4M EC-RE001 Sleeve Rubber Stopper 3. 6.3 ph a) 10 15 18
b) ph c) KCl 60-80 o C Heat for 10 minutes KCl 60-80 ph 10 d) Eutech EC-DPC-BT ph 5 10 6.4 ph ph4.0 1 2 6.4.1 1. 5 2. 15 3. 5 4. 2 5. NaOH 5 15 6. C F 3 19
7 7.1 CyberScan 510 Err. 2 Err. 3 :15mV 90mV Err. 4 10 10 10 Err ( ) ( ) Ur Or ( ) 7.2 a) b) a) b) a) a) b) b) c) c) d) d). a) a) a) a) HOLD b) b) 20
8 8.1 ph ATC ph ph ph 8.2 ph ph ph4.01 7.00 10.01 NIST ph4.01 6.86 9.18 ph7.00 ph ph ph7.00 4.01 ph7.00 10.01 8.3 ph ph 25 ( o C) ph 4.01 ph 7.00 ph 10.01 0 4.01 7.12 10.33 5 4.01 7.09 10.25 10 4.00 7.06 10.18 15 4.00 7.04 10.11 20 4.00 7.02 10.05 25 4.01 7.00 10.01 30 4.01 6.99 9.95 35 4.02 6.98 9.92 40 4.03 6.97 9.88 45 4.04 6.97 9.85 50 4.06 6.97 9.82 55 4.07 6.98 9.80 60 4.09 6.98 9.77 70 4.12 6.99 9.73 80 4.16 7.00 9.69 90 4.20 7.02 9.66 21
8.4 8.4.1 ph EC-BU-1BT EC-BU-4BT EC-BU-7BT EC-BU-9BT EC-BU-10BT EC-BU-4BS EC-BU-7BS EC-BU-10BS EC-RE001 EC-RE005 EC-DPC-BT ph 1.68 (480 ml ) ph 4.01 (480 ml ) ph 7.00 (480 ml ) ph 9.18 (480 ml ) ph 10.01 (480 ml ) ph 4.01 (20 ml x 20 pcs. ) ph 7.00 (20 ml x 20 pcs. ) ph 10.01 (20 ml x 20 pcs. ) (KCl Ag/AgCl) (480 ml ) ph (480 ml ) (480 ml ) 8.4.2 (ISE) 1 BNC NH 3 I- + NH 4 Pb +2 Br - Li + Cd +2 - NO 3 Ca +2 NO x CO 2 - CIO 4 Cl - K + Cu +2 Ag + / S -2 CN- Na + F- X +, X - BF 4-22
8.4.3 ph ORP ] 1 BNC a) ph EC-FG73504 EC-FG73905 EC-FG73905 EC-FG63506 EC-FG73701 EC-FG73504 EC-FG73905 EC-FG72520 ph EC-FG63511 EC-FG63506 EC-FG73521 EC-FG52910 ph 12 14 ph EC-FG74519 ORP EC-FG79601 b) ph EC-FE72521 EC-FE73928 EC-FE72511 ORP EC-FE79602 EC-FE77689 23
8.5 Specifications Model:CyberScan 510 ph510 Lon510 ph 0.00 14.00pH 3 3 0.01 ph 3 3 0.01 ph 3 3 0.01 1999ppm 3 0.01 ppm(0.01 0.99 ppm);0.1 ppm(1.0 ppm 199.9 ppm);1 ppm(200 1999 ppm) 1% 3 mv 1999 Mv 3 3 0.1 mv( 199.9 mv), 3 3 0.2 mv( 199.9mV), 3 3 0.0 100.0 3 3 0.1 3 3 0.3 3 3 ph ph USA: ph 4.01\7.01\10.01 NIST: ph 4.01\6.86\9.18 / (0 100 ) 3 3 3 3 3 3 3 3 ( ) 3 0.1\1.0\10.0\100.0ppm 3 15 mv/decade 90mV/decade 3 0.1, 5 3 3 50 3 3 3 3 3 3 ph 3 3 BNC\Phnon\Ref\ 3 3 ( ) (+/-2000mV 3 3 / 9V (110V /220V,50-60 ) 3 3 (1 4 1 3.5, ) 3 3 230 180 63mm( ) 395 260 90mm( ) 3 3 700gm( ),1550gm( ) 3 3 8.6 Eutech 8.6.1 Eutech 24
EUTECH INSTRUMENTS PTE LTD. Blk 55, Ayer Rajah Crescent, #04-14/24 Singapore 139949 Tel: (65) 778 6876 Fax: (65) 773 0836 E-mail: marketing@eutechinst.com Web-site: http://www.eutechinst.com 25