22

Transcription

1 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF G/F OF FLAT A (DUPLEX) A AS-BUILT PART PLAN 1 The thickness of the floor slabs (excluding floor finish) of G/F of Flat A (Duplex): 130mm, 230mm, 275mm and 450mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.775m, 3.925m, 4.025m and 4.275m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Room and Pool Filtration Plant Room of Flat A (Duplex) are located on LG/F. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan. 6. Please refer to glossary on p. 50 for abbreviations shown in the floor plan. 1. A A 49 AS-BUILT PART PLAN

2 FLOOR PLAN OF 1/F OF FLAT A (DUPLEX) A 1 AS-BUILT PART PLAN NOTES: AS-BUILT PART PLANS OF FLAT A (DUPLEX) The alteration works done to Flat A (duplex) are shown on the as-built part plans on p. 22 and p. 23. The alteration works have been done either by way of exempted works or minor works under the Buildings Ordinance: a) One of the sinks in Kitchen has been relocated. b) Non-structural partition walls have been added and the sink has been omitted in Bedroom 4 on G/F. c) The water closet and sink in Bathroom 6 on G/F have been repositioned. d) Non-structural partition walls have been added to the corridor between Bedroom 1 and Bedroom 2 on 1/F. e) Adjustments have been made to the non-structural partition walls between Bedroom 3 and Bedroom 4 on 1/F. AS-BUILT PART PLAN A A 2223 a b 4 c 6 d e The thickness of the floor slabs (excluding floor finish) of 1/F of Flat A (Duplex): 200mm, 275mm and 450mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.375m, 3.625m, 3.675m, 3.775m, 4.025m, 4.325m, 4.350m, 4.425m, 4.575m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Room and Pool Filtration Plant Room of Flat A (Duplex) are located on LG/F. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan. 6. Please refer to glossary on p. 50 for abbreviations shown in the floor plan. 1 A A

3 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF G/F OF FLAT B (DUPLEX) B AS-BUILT PART PLAN 1. The thickness of the floor slabs (excluding floor finish) of G/F of Flat B (Duplex): 275mm and 450mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 4.025m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Room and Pool Filtration Plant Room of Flat B (Duplex) are located on LG/F. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan. 6. Please refer to glossary on p. 50 for abbreviations shown in the floor plan. 1. B B

4 FLOOR PLAN OF 1/F OF FLAT B (DUPLEX) B 1 NOTES: AS-BUILT PART PLANS OF FLAT B (DUPLEX) The alteration works done to Flat B (duplex) are shown on the as-built part plans on p. 24 and p. 25. The alteration works have been done either by way of exempted works or minor works under the Buildings Ordinance: a) One of the sinks in Kitchen has been omitted; another sink has been altered from a double sink to a single sink. b) Non-structural partition walls have been added and the sink has been omitted in Bedroom 4 on G/F. c) Non-structural partition wall has been added to Master Bedroom on 1/F. d) Non-structural partition wall has been added to the corridor between Bedroom 1 and Bedroom 2 on 1/F. e) Study room on 1/F is now enclosed with non-structural partition walls and a door opening. AS-BUILT PART PLAN B B 2425 a b 4 c 1 d e 1 AS-BUILT PART PLAN 1. The thickness of the floor slabs (excluding floor finish) of 1/F of Flat B (Duplex): 150mm, 200mm, 275mm and 450mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.700m, 3.825m, 3.875m, 4.025m and 4.125m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Room and Pool Filtration Plant Room of Flat B (Duplex) are located on LG/F. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan. 6. Please refer to glossary on p. 50 for abbreviations shown in the floor plan. 1. B B

5 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 2/F 2 AS-BUILT PART PLAN AS-BUILT PART PLAN AS-BUILT PART PLAN

6 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 450mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Room of 2/F is located on LG/F. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 2/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions. 7. Please refer to glossary on p. 50 for abbreviations shown in the floor plan. NOTES: AS-BUILT PART PLANS OF 2/F The alteration works done to the Unit of 2/F are shown on the as-built part plans on p. 26. The alteration works have been done either by way of exempted works or minor works under the Buildings Ordinance: a) One of the sinks in Kitchen has been omitted. b) Non-structural partition walls have been added and the sink has been omitted in Bedroom 4. c) Non-structural partition wall has been added to Bedroom 2. d) Study room is now enclosed with non-structural partition walls and a door opening a b 4 c 2 d

7 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 3/F 3

8 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 450mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Room of 3/F is located on LG/F. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 3/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions. 7. Please refer to glossary on p. 50 for abbreviations shown in the floor plan.

9 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 5/F 5 AS-BUILT PART PLAN AS-BUILT PART PLAN

10 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 450mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Room of 5/F is located on LG/F. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 5/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions. 7. Please refer to glossary on p. 50 for abbreviations shown in the floor plan. NOTES: AS-BUILT PART PLANS OF 5/F The alteration works done to the Unit of 5/F are shown on the as-built part plans on p. 30. The alteration works have been done either by way of exempted works or minor works under the Buildings Ordinance : a) One of the sinks in Kitchen has been omitted. b) Non-structural partition walls have been added and the sink has been omitted in Bedroom 4. c) Study room is now enclosed with non-structural partition walls and a door opening a b 4 c

11 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 6/F 6

12 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 450mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Room of 6/F is located on LG/F. Please refer to the floor plan on p The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 6/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions Please refer to glossary on p. 50 for abbreviations shown in the floor plan.

13 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 7/F 7 AS-BUILT PART PLAN AS-BUILT PART PLAN AS-BUILT PART PLAN AS-BUILT PART PLAN

14 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 300mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Platform of 7/F is located on Roof. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 7/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions. 7. Please refer to glossary on p. 50 for abbreviations shown in the floor plan. NOTES: AS-BUILT PART PLANS OF 7/F The alteration works done to the Unit of 7/F are shown on the as-built part plans on p. 34. The alteration works have been done either by way of exempted works or minor works under the Buildings Ordinance: a) One of the sinks in Kitchen has been omitted. b) Non-structural partition walls have been added and the sink has been omitted in Bedroom 4. c) Bathroom 3 has been relocated to extend the corridor passage from Bedroom 3 to Bedroom 4. d) Non-structural partition walls have been added to Bedroom 1. e) Study room is now enclosed with non-structural partition walls and a door opening a b 4 c d 1 e

15 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 8/F 8

16 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 300mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Platform of 8/F is located on Roof. Please refer to the floor plan on p The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 8/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions Please refer to glossary on p. 50 for abbreviations shown in the floor plan.

17 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 9/F 9

18 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 300mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Platform of 9/F is located on Upper Roof. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 9/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions. 7. Please refer to glossary on p. 50 for abbreviations shown in the floor plan.

19 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 10/F 10

20 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 300mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Platform of 10/F is located on Roof. Please refer to the floor plan on p The rectangular area which is enclosed by walls outside Bedroom 4B on this floor plan houses gas water heaters serving this residential unit on 10/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions B Please refer to glossary on p. 50 for abbreviations shown in the floor plan.

21 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 11/F 11

22 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 275mm and 300mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 3.675m, 3.725m, 3.775m, 3.825m, 3.875m, 4.025m, 4.175m, 4.225m, 4.275m, 4.325m and 4.375m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Platform of 11/F is located on Roof. Please refer to the floor plan on p The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 11/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions Please refer to glossary on p. 50 for abbreviations shown in the floor plan.

23 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF 12/F 12 AS-BUILT PART PLAN AS-BUILT PART PLAN AS-BUILT PART PLAN AS-BUILT PART PLAN AS-BUILT PART PLAN

24 1. The thickness of the floor slabs (excluding floor finish) of this residential floor: 300mm. 2. Floor-to-floor height (refers to the height between the top surface of the structural slab of a floor and the top surface of the structural slab of its immediate upper floor): 4.050m, 4.200m, 4.250m, 4.300m, 4.350m and 4.400m. 3. The internal areas of the residential properties on the upper floors will generally be slightly larger than those on the lower floors because of the reducing thickness of the structural walls on the upper floors. 4. The A/C Plant Platform of 12/F is located on Roof. Please refer to the floor plan on p The lines in blue colour marked on the floor plan show those doors where they are installed. Interior fittings between doors and walls which are installed are not shown on the floor plan The rectangular area which is enclosed by walls in Bedroom 4 on this floor plan houses gas water heaters serving this residential unit on 12/F. For details, please refer to Mechanical and Electrical Provision Plan and Schedule of Mechanical & Electrical Provisions. 7. Please refer to glossary on p. 50 for abbreviations shown in the floor plan. NOTES: AS-BUILT PART PLANS OF 12/F The alteration works done to the Unit of 12/F are shown on the as-built part plans on p. 44. The alteration works have been done either by way of exempted works or minor works under the Buildings Ordinance: a) Non-structural partition walls have been added and one of the sinks has been omitted in Kitchen. b) Non-structural partition walls have been added and the sink has been omitted in Bedroom 4. c) Non-structural partition walls have been added to Bedroom 1 and Bedroom 2. d) Study Room is now enclosed with non-structural partition walls and a door opening a b 4 c 1 2 d

25 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF ROOF AT LEVEL mPD Flat Roof on this floor plan means the uppermost roof slab of the building. 2. Please refer to glossary on p. 50 for abbreviations shown in the floor plan

26 FLOOR PLAN OF ROOF AT LEVEL mPD AIR-CONDITIONING PLANT PLATFORM 1. A/C plant platform is located on a metal rack, beneath which is the mechanical space being part of the Residential Common Areas and Facilities. 2. Please refer to glossary on p. 50 for abbreviations shown in the floor plan

27 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT FLOOR PLAN OF UPPER ROOF AIR-CONDITIONING PLANT PLATFORM 1. Please refer to glossary on p. 50 for abbreviations shown in the floor plan

28 FLOOR PLAN OF LG/F AIR-CONDITIONING PLANT ROOM AND POOL FILTRATION PLANT ROOM 1. Please refer to glossary on p. 50 for abbreviations shown in the floor plan

29 FLOOR PLANS OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT GLOSSARY A/C DUCT = AIR-CONDITIONING DUCT A/C PLANT PLATFORM = AIR-CONDITIONING PLANT PLATFORM A/C PLANT ROOM = AIR-CONDITIONING PLANT ROOM A/C PLATFORM WITHIN MECHANICAL SPACE (UPPER PART) BALCONY BATH = BATHROOM B.R. = BEDROOM B.W. = BAY WINDOW COMMUNAL OUTDOOR SWIMMING POOL COMMUNAL ROOF DINING = DINING ROOM DISABLED PLATFORM ELET. DUCT = ELECTRIC DUCT ENTRANCE FOYER ENTRANCE LIFT LOBBY FAMILY ROOM FIREMAN S LIFT LOBBY FLAT ROOF FOYER GARDEN AREA GLASS CANOPY H.R. = HOSE REEL JACUZZI POOL KITCHEN LAV. = LAVATORY LAWN LIFT LIVING = LIVING ROOM MASTER BATH = MASTER BATHROOM MASTER BEDROOM MASTER LAV. = MASTER LAVATORY METER ROOM P.D. = PIPE DUCT P.D. (W/ PLUMBING) = PIPE DUCT (WITH PLUMBING) PLANTER POOL DECK POOL FILTRATION PLANT ROOM RECREATIONAL FACILITIES - FITNESS ROOM - SHOWER ROOM STUDY = STUDY ROOM SWIMMING POOL TEL. = TELEPHONE PIPE DUCT = UTILITY PLATFORM VERANDAH VESTIBULE VOID

30 AREA OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT

31 AREA OF RESIDENTIAL PROPERTIES IN THE DEVELOPMENT Description of Residential Property Block Name Floor Saleable Area (including balcony, utility platform and verandah, if any) sq m (sq ft) Airconditioning plant room Area of other specified items (Not included in the Saleable Area) sq m (sq ft) Bay window Cockloft Flat roof Garden Parking space Roof Stairhood Terrace Yard G/F & 1/F Flat A (Duplex) A (5,188) Balcony : (36) Utility Platform : Verandah : (113) (188) (35) (3,245) G/F & 1/F Flat B (Duplex) B (4,819) Balcony : (54) Utility Platform : (16) Verandah : (261) (201) (20) (3,520) 2/F (5,146) Balcony : (54) Utility Platform : (16) Verandah : (535) (138) (17) (52) OPUS HONG KONG 3/F (5,132) Balcony : (54) Utility Platform : (16) Verandah : (492) (215) (17) 5/F (5,154) Balcony : (54) Utility Platform : (16) Verandah : (483) (182) (17) 6/F (5,199) Balcony : (54) Utility Platform : (16) Verandah : (490) (121) (17) 7/F (5,271) Balcony : (54) Utility Platform : (16) Verandah : (503) (17)

32 Description of Residential Property Block Name Floor Saleable Area (including balcony, utility platform and verandah, if any) sq m (sq ft) Airconditioning plant room Area of other specified items (Not included in the Saleable Area) sq m (sq ft) Bay window Cockloft Flat roof Garden Parking space Roof Stairhood Terrace Yard 8/F (5,331) Balcony : (54) Utility Platform : (16) Verandah : (519) (17) 9/F (5,275) Balcony : (54) Utility Platform : (16) Verandah : (456) (17) (52) OPUS HONG KONG 10/F (5,322) Balcony : (54) Utility Platform : Verandah : (490) (17) (31) 11/F (5,409) Balcony : (54) Utility Platform : (16) Verandah : (530) (17) 12/F (5,444) Balcony : (54) Utility Platform : (16) Verandah : (546) (17) (1,508) 1. The saleable area is calculated in accordance with Section 8 of the Residential Properties (First-hand Sales) Ordinance. 2. The floor areas of balcony, utility platform and verandah (if any) are calculated in accordance with Section 8 of the Residential Properties (First-hand Sales) Ordinance. 3. The area of other specified items (not included in the saleable area) are calculated in accordance with Part 2 of Schedule 2 to the Residential Properties (First-hand Sales) Ordinance Note: The areas in square metre have been converted to square foot based on a conversion rate of 1 square metre = square feet and rounded off to the nearest integer. 1 =10.764