进口摇头开关IP67防水钮子开关进口钮子开关NKK摇头开关中型钮子开关说明书pdf小型钮子开关NKK钮子开关英文资料

Transcription

1 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Contents IP8 防水钮子开关厂家 NKK Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical PC PCB Mount B Series... ntistatic; Process Sealed 0.V Logic Level Straight, Right ngle, & Vertical PC PCB Mount B Series Illuminated...0 Subminiature Fully Illuminated; Process Sealed 0.V Logic Level Straight, Right ngle, & Vertical PC PCB Mount D Series... 0.V Logic Level Straight, Right ngle, & Vertical PC PCB Mount G Series... Ultra-Miniature; Process Sealed 0.V Logic Level Straight, Right ngle, & Vertical PC PCB Mount G Series Illuminated...8 Ultra-Miniature Fully Illuminated 0.V Logic Level Straight, Right ngle, & Vertical PC PCB Mount GT Series... Ultra-Miniature; Process Sealed SMT 0.V Logic Level Gull-wing Terminals Upright & Right ngle Mount M Series...8 Bushing Mount Power Level & 0.V Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap 军用钮子开关价格查询全国统一热线 tuizer@.com

2 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 IP8 防水钮子开关厂家 NKK Contents M Series...0 Straight PC with Bracket Power Level & 0.V Logic Level PCB Mount Rockers M Series... Right ngle & Vertical PC Power Level & 0.V Logic Level PCB Mount M00 Series Illuminated...7 Power Level & 0.V Logic Level LED Tipped Toggle Solder Lug, Quick Connect, & PC Bushing, Flat Frame & Snap-in Mount MT Series...8 Process Sealed Power Level & 0.V Logic Level Straight, Right ngle, Vertical, & Extended PC PCB Mount P Series...90 Internationally pproved 0 Power Level Solder Lug, Straight PC, & Quick Connect Bushing Mount S Series...9 to 0 Low, Medium, & High Capacity Solder Lug, Quick Connect, & Screw Lug Bushing Mount TL Series Illuminated...8 Power Level or 0.V Logic Level Translucent Toggle with Bright or Super Bright LED Solder Lug; Bushing Mount WT Series... Environmentally Sealed 0 Power Level Solder Lug, Screw Lug, & Wire Lead Bushing Mount 军用钮子开关价格查询全国统一热线 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

3 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series IP8 防水钮子开关厂家 NKK Process Sealed Subminiature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V C minimum between contacts for minute minimum; 00V C minimum between contacts & case for minute minimum Mechanical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits Electrical Life: 0,000 operations minimum Nominal Operating Force:.7N (momentary);.8n (maintained) for.9 (0.0mm) toggles.7n (momentary);.8n (maintained) for all other toggles Contact Timing: Nonshorting (break-before-make) ngle of Throw: Materials & Finishes Toggle: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: PCB Processing Shock: Soldering: Cleaning: Standards & Certifications Glass fiber reinforced polyamide for antistatic; nickel plated brass for all others Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 0 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering Recommended. See Profile in Supplement section. Manual Soldering: See Profile B in Supplement section. utomated cleaning. See Cleaning Specifications in Supplement section. The Series toggles have not been tested for UL recognition or CS certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. 军用钮子开关价格查询全国统一热线 tuizer@.com

4 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Subminiature IP8 防水钮子开关厂家 NKK Series Distinctive Characteristics Subminiature size saves space on PC boards. Rockers Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (dditional STC details in Terms & cronyms; see Supplement contents.) Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants..00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing. Toggle option in antistatic material available for dissipating electrostatic discharges. Matching indicators available. 军用钮子开关价格查询全国统一热线 ctual Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

5 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series IP8 防水钮子开关厂家 NKK Process Sealed Subminiature TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Poles SPST SPDT DPDT SPT J J E H K Circuits NE NE NE () R () NE 8 () () 9 () S () * * () () * 7 () ( ) = Momentary * - circuits SPDT -NE- Circuit P B B H V V J.9 (0.0mm) Bat.8 (.mm) Bat.8 (.mm) ntistatic Bat.9 (0.0mm) Flatted.8 (.mm) Flatted Snap Top for or B Paddle PC Terminals Straight Straight with Bracket Straight with Inline Bracket (Single Pole only) Right ngle with Bracket Vertical with Bracket Vertical with Inline Bracket (Single Pole only) DESCRIPTI FOR TYPICL ORDERING EXMPLE.8 (.mm) Long Bat Toggle JV 军用钮子开关价格查询全国统一热线 V G J B Optional Caps.9 (0.0mm) Bat Lever Cap.8 (.mm) Bat Lever Cap Paddles Short Paddle for K Toggle Long Paddle for K Toggle Vertical PC Terminals Cap Colors Paddle Colors Black B White B C Red C --- Yellow E --- Green F --- Blue G --- Gray H tuizer@.com

6 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Subminiature IP8 防水钮子开关厂家 NKK Series POLES & CIRCUITS Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Slot Up Center Down Up Center Down Slot Note: Terminal numbers are not actually on the switch. Rockers SP NE OPEN OPEN - SPST SP DP R 8 9 S R 8 9 S () () () () () () NE NE NE NE NE NE () () () () () () Connected Terminals & Schematics - OPEN - SPDT - - OPEN - - DPDT For Throw (-on) Pole Model Up Center Down SP 7.9 (0.0mm) Bat () Standard Material & Finish: Brass with Bright Nickel (0.0).9 (.) Dia.0 TOGGLES () () - - (COM) External Connection INTERNL CNECTI (COM) (out) Common (in) (out) (out) External Conn Material & Finish for J: Matte finish black glass fiber reinforced polyamide J J.8 (.mm) Bat.8 (.mm) ntistatic Bat (.).8 (.) Dia.0 E H K.9 (0.0mm) Flatted.8 (.mm) Flatted Snap Top for Paddles (0.0).9 External Connection (in) (out) (out) (out) (.).0 (.7).0 External Connection (in) (out) (out) (out) (.).8 External Connection (in) (out) (out) (out) 军用钮子开关价格查询全国统一热线 (.).0 Dissipating 0Kv ESD: Straight PC Dissipating 0Kv ESD: Straight PC with Bracket, Right ngle, & Vertical (.).0 The SPT model utilizes a double pole base. External connections must be made during field installation. (.0).97 (.).8 (.).0 (.) Dia.08 (.).098 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

7 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series IP8 防水钮子开关厂家 NKK Process Sealed Subminiature PC TERMINLS Use of a support bracket is recommended to increase PCB mounting strength and stability. Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers P H G (.) Typ.00 Straight Typ.00 (0.8).0 (9.0). Right ngle with Bracket.00 (0.).0 (0.7).08 (0.).00 Material: PVC Colors vailable:, B, C (.) Typ.00 (0.) Dia Typ.0 (8.8). (.) Typ.00 (0.) Dia Typ.0 (8.8). (9.0). T00.9 (0.0mm) Bat Lever Cap T7 Short Paddle Material: Polyamide Colors vailable:, B, C, E, F, G, H (.0). (0.).0 B V (.0) Dia.8 (0.0).9 (.).09 Straight with Bracket Color Codes: Material: PVC Colors vailable:, B, C B C E F G Black White Red Yellow Green Blue (9.0). (0.).00 (8.8). (.) Typ.00 (0.) Dia Typ.0 (0.) Typ.0 (0.7) Typ.08 Vertical with Bracket (.) Typ (0.).0 (.).8 (0.7) (9.0). (0.) Dia Typ.0 (0.) Typ.00 J (8.8). CPS & PDDLES B B V Straight with Inline Bracket Single Pole only (.).00 (0.) Typ.0 (9.0). (0.).00 (.) Typ.00 (0.) Dia Typ.0 (0.7) Typ.08 (.0).09 C L.00 Vertical with Inline Bracket Single Pole only (.) Typ (0.).0 T0.8 (.mm) Bat Lever Cap T8 Long Paddle Material: Polyamide Colors vailable:, B, C, E, F, G, H 军用钮子开关价格查询全国统一热线 (.0).97 (9.).70 (7.0).7 (.).9 (0.) Dia Typ.0 (0.) Typ.00 (0.7).08 (9.0). (.0) Dia.8 (.).8 H (.).09 (.0) Dia.97 Gray (.0).09 C L.00 (.).7 (.).9 tuizer@.com

8 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Subminiature TYPICL SWITCH DIMENSIS Single Pole IP8 防水钮子开关厂家 NKK Series Straight PC (.0). Slot (.0). Slot (.0). Slot (.0). Slot (.0).97 (0.) Typ.0 (.8).0 (.0).97 (9.). (.0).97 (.8).0 (.0).97 (9.).7 (0.).0 (0.) Typ.0 (0.).0 (0.).0 (0.).0 (.) Dia.0 (.) Dia.0 (.) Dia.0 (.) Dia.0 (0.0).9 (0.0).9 (.).8 (0.0).9 (.).77 (.).8 (0.0).9 (0.).00 (.). (.) (0.) (.). (0.8).0 (.). (0.) Typ.0 (0.8).0 (.). (0.) Dia Typ.0 (.) Typ.00 (.). models do not have Terminal (.) Typ.00 (.). (0.) Typ.0 Double Pole (0.) Dia Typ.0 (.) Typ.00 (.). (0.) Dia Typ.0 (0.).00 (.) Typ.00 (.). Single Pole Double Pole (0.) Dia Typ.0 (0.).00 (0.7) Typ.08 (9.8).8 (.0).09 (.) C L.00 C L (9.8).8 (.0) (9.8).8.00 P Straight PC P Straight PC Bracket B Terminals B Terminals B (9.8).8 (0.7) Typ (.) Typ.00 (0.8) Dia Typ.0 (.).00 C L 军用钮子开关价格查询全国统一热线 (.0).09 (.0).09 (.) Typ.00 (0.8) Dia Typ.0 C L.00 (.) Typ.00 (0.8) Dia Typ.0 C L (.0) (.) Typ.00 (0.8) Dia Typ.0 (.) Typ.00 (0.8) Dia Typ.0 Straight PC Bracket B tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

9 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series IP8 防水钮子开关厂家 NKK Process Sealed Subminiature TYPICL SWITCH DIMENSIS Right ngle PC Single Pole Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers H Right ngle PC H Vertical PC Vertical PC Single Pole V V Terminals V Terminals V (.0). Slot (0.) Typ.0 (.).00 (.8).0 (.0).97 (0.) Typ.0.00 (.0).97 (0.) Typ.0.00 (.0). (0.).0 (9.8).8 (.0).97 (0.).0 (.0). Slot (0.) Typ.0.00 (.0). (0.).0 (9.8).8 (0.7) Typ.08 (.) Dia.0 (.0).97 (0.) Typ.0 (9.).7 (.) Dia.0 (.) Dia.0 (0.0).9 (0.0).9 (0.7).08 (.).77 Slot Double Pole (.).00 (.).00 (.).77 (.) Dia.0 (.).8 (0.0).9 (.).9 Double Pole (.).8 Slot (0.7) (.). (9.8).9 (0.8).0 (.).08 (0.).00 (.0).09 (.) Typ.00 (0.7) (8.9).7 (0.8).0 (.). (.)..00 (0.8).0 (.).0 (.).00 (.). (.). (0.).00 (0.).00 (.0).09 (.) Typ.00 军用钮子开关价格查询全国统一热线 (0.0).9 (0.8).0 (.).08 C L (.). (0.).0 (0.) Dia Typ.0 (.0) (.8). (0.) Dia Typ.0 (.) Typ.00 (0.0).9 (0.) Dia Typ.0 (.) Typ.00 (.0).09 (.) Typ.00 (0.8) Dia Typ.0 (.).00 C L (0.).0 (0.) Dia Typ.0.00 (.) Typ (0.8) Dia Typ.0 (.) Typ.00 (.) (0.8) Dia Typ.0 C L (.0).09 (.) Typ (0.8) Dia Typ.0.00 (.) Typ (0.8) Dia Typ.0 tuizer@.com

10 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series B IP8 防水钮子开关厂家 NKK Process Sealed Subminiature ntistatic General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V C minimum for minute minimum Mechanical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits 0,000 operations minimum for locking lever models Electrical Life: 0,000 operations minimum Nominal Operating Force:,, E & K with Long Paddle:.7N (momentary);.8n (maintained) J & H & K with Short Paddle:.7N (momentary);.8n (maintained) Toggle L: 0.9N Contact Timing: Nonshorting (break-before-make) ngle of Throw: Materials & Finishes Toggle: Bushing: Gasket: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Mounting Torque: PCB Processing Soldering: Cleaning: Standards & Certifications Flammability Standards: Nickel plated brass Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing Nitrile butadiene rubber Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Copper alloy with gold plating Copper alloy with gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction).0 ~.Nm (. ~.98 lb in) for actuator with threaded bushing only Wave Soldering Recommended: See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. utomated cleaning. See Cleaning specifications in Supplement section. UL9V-0 available The B Series toggles have not been tested for UL recognition or CS certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. 军用钮子开关价格查询全国统一热线 tuizer@.com

11 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Subminiature ntistatic IP8 防水钮子开关厂家 NKK Series B Distinctive Characteristics Subminiature size saves space on PC boards. Rockers Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operator s touch travels from actuator through the bushing and bracket to the PC board. Locking lever mechanism offered as a toggle option. Optional threaded, mm diameter bushing for panel seal mounting meets IP of IEC09 specifications (similar to NEM and ). Totally sealed body construction prevents contact contamination and allows timeand money-saving soldering and cleaning. Epoxy sealed terminals lock out flux and other contaminants. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (dditional STC details in Terms & cronyms; see Supplement section.).00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

12 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series B IP8 防水钮子开关厂家 NKK Process Sealed Subminiature ntistatic TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers B Poles SPDT DPDT J E H Circuits NE NE () * R () NE 8 () () 9 () * S () ( ) = Momentary * Reverse circuits R & S available with right angle & vertical only L.9 (0.0mm) Bat DESCRIPTI FOR TYPICL ORDERING EXMPLE.9 (0.0mm) Bat Toggle Straight PC Terminals with Bracket. (8.0mm) Bat with Panel Seal Threaded Bushing (Straight PC only).8 (.mm) Bat.9 (0.0mm) Flatted.8 (.mm) Flatted Locking Lever (with Circuits & only) BB B PC Terminals P Straight * B Straight with Bracket * H Right ngle with Bracket * V Vertical with Bracket * Bracketed models are ESD protected G J Optional Caps.9 (0.0mm) Bat Lever Cap.8 (.mm) Bat Lever Cap SPDT -NE- Circuit 军用钮子开关价格查询全国统一热线 Cap Colors Paddle Colors Black B White B C Red C --- Yellow E --- Green F --- Blue G --- Gray H tuizer@.com

13 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Subminiature ntistatic IP8 防水钮子开关厂家 NKK Series B Pole SP DP E.9 (0.0mm) Bat (0.0).9 Model B B B BR B8 B9 BS B B B BR B8 B9 BS (0.0).9.9 (0.0mm) Flatted Slot (.).0 (.) Dia.0 Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Up Center Down Up Center Down () () () () () () (.7).0 NE NE NE NE NE NE () () () () () () TOGGLES Standard Material & Finish: Brass with Bright Nickel H POLES & CIRCUITS. (8.0mm) Bat with Panel Seal Threaded Bushing (8.0). (.) Dia.0 J.8 (.mm) Bat (.).8 L.8 (.mm) Flatted Locking Lever (.).8 (.).0 (.).0 Note: - OPEN - SPDT - - OPEN - - DPDT 军用钮子开关价格查询全国统一热线 Slot Terminal numbers are not actually on the switch. (.9). (.).9 (.). (COM) (COM) (.) Dia.0 (.8).8 (.) Dia.77 (.) Dia.0 tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

14 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series B IP8 防水钮子开关厂家 NKK Process Sealed Subminiature ntistatic PC TERMINLS Use of a support bracket is recommended to increase PCB mounting strength and stability. Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers P H G Straight Right ngle with Bracket T00.9 (0.0mm) Bat Lever Cap Material: PVC Colors vailable:, B, C (.) Typ (0.) Dia Typ.0 (.) Typ.00 (0.).0 (0.).0 (0.) Typ.00 (.0). (.) Typ. (.) Typ.00 (0.) Dia Typ.0 (.0) Dia.8 (0.0).9 Color Codes: Straight with Bracket Material: PVC Colors vailable:, B, C B C E F G Black White Red Yellow Green Blue B V OPTIL CPS J (0.) Typ.0 Vertical with Bracket (0.) Typ.00 (0.) Dia Typ.0 (.) Typ.00 (0.).0 (0.).0 (0.).00 T0.8 (.mm) Bat Lever Cap 军用钮子开关价格查询全国统一热线 (7.0).7 (.) Typ.00 (0.) Dia Typ.0 (0.) Typ.0 (.). (.0) Dia.8 (.).8 H Gray tuizer@.com

15 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Subminiature ntistatic TYPICL SWITCH DIMENSIS Single Pole IP8 防水钮子开关厂家 NKK Series B Straight PC (.0) Dia. Slot (.0) Dia. Slot (.0) Dia. Slot (.0) Dia. Slot (.0) Dia. (.8).8 (8.8). (.0). (8.0). (.0). (8.8). (0.) Typ.0.00 (.) Dia.0 (.) Dia.0 (.).8 (0.0).9 (.) Dia.0 (.).8 (0.0).9 (.) Dia.0 (.7).0 (0.0).9 (.) Dia.0 (.7).0 (0.0).9 Slot (.7).0 (0.0).9 (0.8).0 (.). (0.8).0 (.). (0.8).0 (.). (0.8).0 (.). (0.) Typ.0 (0.) Typ.0 (0.).0 (.9). (0.) Dia Typ.0 (.) Typ.00 (.). (0.) Dia Typ.0 (.) Typ.00 (.). Double Pole (0.) Dia Typ.0 (0.).00 (.) Typ.00 (.). Single Pole Double Pole (0.) Dia Typ.0 (0.).00 (.) Typ.00 (.). (.). (.)..00 Single Pole C L C L (7.).87 (8.8). (.0).09 (8.8). (8.8)..00 (0.) Typ.0 (8.8). (.0).09 (.).00 (8.8). (0.) Typ.0.00 (0.) Dia Typ.0 (.) Typ.00 军用钮子开关价格查询全国统一热线 (.0).09 (.) Typ.00 (0.8) Dia Typ.0 C L.00 (.) Typ.00 (0.8) Dia Typ.0 (.0).09 (.) Typ.00 (0.8) Dia Typ.0 (.).00 C L.00 (.) Typ (0.8) Dia Typ.0 (.) Typ.00 (0.8) Dia Typ.0 BP Straight PC BP Straight PC Bracket BB Straight PC Bracket BB Right ngle PC BH tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

16 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series B IP8 防水钮子开关厂家 NKK Process Sealed Subminiature ntistatic Right ngle PC TYPICL SWITCH DIMENSIS Double Pole Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers BH Vertical PC BV Vertical PC BV Locking Lever Straight PC Bracket BLB Locking Lever Straight PC Bracket BLB Slot (.0) Dia. Slot (.0) Dia. (0.) Typ.0.00 (.0) Dia. Slot (0.) Typ.0 (.).00 (.0) Dia. Slot (0.) Typ.0.00 (.0). (8.0). (.8). (8.8).8 (8.8). (8.0). (8.8). (.) Dia.0 (.) Dia (.) Dia.77.0 (.) Dia.77 (.) Dia.0 (.) Dia.0 (.7).0 (0.0).9 (.8).8 (.). (.).9 (.) Dia.0 Slot (.7).0 (0.0).9 (.8).8 (.). (.).9 Single Pole Double Pole (0.).0.00 (8.9).7 Single Pole (.).7 Double Pole (.).7 (0.).0 (.). (.).0 (.).0 (0.8).0 (0.8).0 (0.) Typ.0 (0.) Typ.0 (.). (.) (.0).09 (.0).09 (.).7 (0.) Dia Typ.0 (0.).00 (.) Typ.00 (.). (0.) Dia Typ.0 (0.).00 (0.).00 (.).7 (0.) (.).00. (.) Typ.00 (.) Typ.00 (.). (.).7 (.7).0 (0.).0 (0.).00. (.).00 (.) Typ.00 (0.0).9 (8.9).7 C L 军用钮子开关价格查询全国统一热线 C L.0 (.0).09 (0.) Typ.0 (.0).09 (.).00 (8.8). (0.) Dia Typ.0 (.) Typ.00 (8.8). (0.) Dia Typ (8.8). (0.) Dia Typ.0.00 (8.8). (8.8). (0.) Typ.0.00 (.) Typ.00 (.) (0.8) Dia Typ.0 (.0).09 (.) Typ (0.8) Dia Typ.0 C (.) L (.) Typ (0.8) Dia Typ.0 (.0).09 (.) Typ.00 (0.8) Dia Typ.0 (.).00 C L.00 (.) Typ.00 (0.8) Dia Typ.0 tuizer@.com

17 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Subminiature ntistatic TYPICL SWITCH DIMENSIS Panel Seal Single Pole IP8 防水钮子开关厂家 NKK Series B Threaded Bushing Straight PC Slot Slot (.8).89 (.8).8 (.8).89 (8.8). TM Metric Hex Nut Material: Brass, Nickel plated (.) Dia.0 (.) Dia.0 (9.0). M P0.7 (8.0). M P0.7 (8.0). M P0.7 (.).09 (8.0). (.) (0.8).7.0 (.).9 (.) (0.8).7.0 (.).9 (0.) Dia Typ.0 (.) Typ.00 (.). Panel Seal Double Pole (0.) Dia Typ.0 (.) Typ.00 (.). STNDRD HRDWRE & PNEL CUTOUT T0 Gasket Material: Nitrile butadiene rubber C L C L (.0).09 (.9).9 (.9).7 (8.8). (8.8). (.) Typ.00 (.) (8.)..9 军用钮子开关价格查询全国统一热线 (.).0 (.0).09 (.) Typ.00 (0.8) Dia Typ.0 C L BP Threaded Bushing Straight PC.00 (.) Typ.00 (0.8) Dia Typ.0 (.0).97 (.0). BP Maximum Panel Thickness with Standard Hardware:.087 (.mm) tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

18 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series B IP8 防水钮子开关厂家 NKK Subminiature Fully Illuminated Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V C minimum for minute minimum Mechanical Life: 00,000 operations minimum Electrical Life: 0,000 operations minimum Nominal Operating Force:.8N Contact Timing: Nonshorting (break-before-make) ngle of Throw: Materials & Finishes ctuator: Bushing Housing: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: PCB Processing Shock: Soldering: Cleaning: Standards & Certifications Polyamide Polyamide Glass fiber reinforced polyamide Phosphor bronze with tin plating Phosphor bronze with gold plating Brass with tin plating Brass with gold plating C through + C ( F through + F) 90 ~ 9% humidity for 0 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minutes; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering recommended. See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. utomated alcohol based cleaning recommended, minutes maximum. Do not use high-purity alcohol (0% alcohol or more) or organic solvent. High alcohol solution can damage clear plastic. See Cleaning specifications in Supplement section. The B Series illuminated toggles have not been tested for UL recognition or CS certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. 军用钮子开关价格查询全国统一热线 tuizer@.com

19 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Subminiature Fully Illuminated IP8 防水钮子开关厂家 NKK Series B Distinctive Characteristics LED provides maximum illumination to bushing and actuator, indicating actuator status in highly visible green, red, or amber for single color or red/green for bicolor. (Patent pending.) Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Molded-in, epoxy sealed terminals lock out flux and other contaminants. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (dditional STC details in Terms & cronyms; see Supplement section.).00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

20 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series B IP8 防水钮子开关厂家 NKK Subminiature Fully Illuminated TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers B J J P Poles SPDT Pole Throw SPDT J Model B B Slot Clear Toggle Circuits NE Combines with single color or bicolor LEDs Combines with bicolor LED only J ctuator J Clear Bushing DESCRIPTI FOR TYPICL ORDERING EXMPLE Clear Toggle & Bushing with Red LED (.).8 (.).8 Straight PC Terminals (.9) Dia.07 BJJPC Clear CTUTOR & BUSHING J PC Terminals P Straight H Right ngle V Vertical SPDT -NE- Circuit Toggle Position Connected Terminals Throw & Schematics Up Center Down Up Center Down NE Slot - - POLE & CIRCUITS NE OPEN - - Clear Bushing C LEDs Single Color C Red D mber F Green -NE- only Bicolor CF Red/Green -NE- & -- Note: Terminal numbers are not actually on the switch. LED circuit is isolated and requires an external power source. (COM) 军用钮子开关价格查询全国统一热线 () () Single Color () Bicolor () Red () Green tuizer@.com

21 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Subminiature Fully Illuminated IP8 防水钮子开关厂家 NKK Series B LEDs are an integral part of the switch and not available separately. The electrical specifications shown are determined at a basic temperature of C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. P (.0) Dia. Slot (.0) Dia. (0.) Typ.0 (.0) Dia. Slot (0.) Typ.0 Straight (8.8)..00 (8.8)..00 (8.8). (.9) Dia.07 (.9) Dia.07 (.).8 (.).8 Slot (.7).0 (.).8 (.9) Dia.07 (.7).0 (.).8 (0.8).0 (.). H (0.).0.00 (.). (0.).0.00 (8.9).7 LED COLORS & SPECIFICTIS PC TERMINLS Right ngle with Bracket TYPICL SWITCH DIMENSIS (0.) Dia Typ.0 (.) Typ.00 (.). (.).00 (.). (.). (0.).00 (0.) Typ.00 (.) Typ (8.8). Terminal is a support pin on single color models. (8.8). (0.) Dia Typ.0 (.) Typ.00 Terminal is a support pin on single color models..00 (8.8). (0.) Dia Typ.0 Single Color (.) Typ.00 Terminal is a support pin on single color models. V.00 (.) Typ (0.8) Dia Typ.0 Vertical with Bracket.00 (.) Typ.00 (0.8) Dia Typ.0 (.) (0.8) Dia Typ.0 Bicolor Red mber Green Red/Green Forward Peak Current I FM 0m 0m 0m 0m/0m Typical Forward Current I F 0m 0m 0m 0m/0m Forward Voltage V F.9V.9V.V.9V/.V Reverse Peak Voltage V RM V V V V/V Current Reduction Rate bove C I F 0.m/ C 0.8m/ C 0.m/ C/0.8m/ C mbient Temperature Range Colors 军用钮子开关价格查询全国统一热线 C D F C ~ + C CF Straight PC BJJPC Right ngle PC BJJHCF Vertical PC BJJVCF tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

22 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series D IP8 防水钮子开关厂家 NKK PCB Mount Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V C minimum between contacts for minute minimum;,00v C minimum between contacts & case for minute minimum Mechanical Life: 00,000 operations minimum for bat lever models 0,000 operations minimum for locking lever models Electrical Life: 0,000 operations minimum Contact Timing: Nonshorting (break-before-make) ngle of Throw: Materials & Finishes Toggle/Lever: Bushing: Support Bracket: Housing: Base: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: PCB Processing Soldering: Cleaning: Standards & Certifications Flammability Standards: Brass with chrome plating Brass with nickel plating Straight PC: phosphor bronze with tin plating; right angle & vertical: brass with tin plating Polybutylene terephthalate (PBT) (UL9V-0) - and -pole GFR polyamide (UL9V-0); -pole liquid crystal polymer (LCP) (UL9V-0) Phosphor bronze with gold plating Brass with gold plating Brass with gold plating 0 C through +70 C (+ F through +8 F) 90 ~ 9% humidity for 0 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering recommended. See Profile in Supplement section. Manual Soldering: - & -pole: seconds 0 C maximum; -pole: seconds 0 C maximum Hand clean locally using alcohol based solution. See Cleaning specifications in Supplement section. UL9V-0 rated housing & base The D Series toggles have not been tested for UL recognition or CS certification. These switches are designed for use in a low-current, logic level circuit. When used as intended in a logic level circuit, the results do not produce hazardous energy. 军用钮子开关价格查询全国统一热线 tuizer@.com

23 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 PCB Mount Miniature IP8 防水钮子开关厂家 NKK Series D Distinctive Characteristics Base of heat resistant resin meets UL9V-0 flammability rating. Maximized voltage capability of 8V allows use in medium source applications and increases operating life. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother positive detent actuation, increased contact stability, and unparalleled reliability. (dditional STC details under Terms and cronyms in the Supplement section.) Round.0 (0.8mm) diameter PC terminals for easy PCB assembly. Terminal spacing conforms to standard.00 (.mm) PC board grid spacing. Molded-in terminals prevent entry of flux, solvents, and other contaminants. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

24 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series D IP8 防水钮子开关厂家 NKK PCB Mount Miniature TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers D0 Poles SPDT DPDT * PDT * Combines with -NE- circuit only & not available with Right ngle Circuits NE NE () 8 () () 9 () ( ) = Momentary No Code L ctuators. (0.mm) Bat Lever.00 (.mm) Diameter Locking Lever DESCRIPTI FOR TYPICL ORDERING EXMPLE. (0.mm) Bat Lever D0P P B H V SPDT -NE- Circuit Straight PC Terminals 军用钮子开关价格查询全国统一热线 P PC Terminals Straight Straight with Bracket Right ngle w/bracket Vertical with Bracket tuizer@.com

25 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 PCB Mount Miniature IP8 防水钮子开关厂家 NKK Series D POLES & CIRCUITS Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Down Center Up Down Center Up Note: Terminal numbers are not actually on the switch. Rockers SP DP D0 D0 D0 D08 D09 D0 D0 D0 D08 D09 T Bat Lever Cap Material: Polyethylene Colors vailable: B C E F G () () NE NE NE NE () () () () () () P D0 NE No Code Material: Chrome over brass P Straight. (0.mm) Bat Lever (.0) Dia.97 (.). B (.8) Dia.0 (0.). (.0).7 Straight with Bracket T Bat Lever Conical Cap Material: Polyethylene Colors vailable: B C E F G - OPEN - SPDT - - OPEN - - DPDT OPEN CTUTORS L Material: Chrome over brass PC TERMINLS H PDT. (.mm) Diameter Locking Lever Right ngle with Bracket OPTIL CPS & CP COLORS (.8) Dia.89 (.). (.). (COM) (COM) (COM) 8 V T7 Cap Supplied with Locking Lever Material: nodized luminum (.) Dia.0 (9.).7 Colors vailable: C G (7.9).70 (7.0) (.).7.0 (8.0). 9 Vertical with Bracket Colors Codes: Black B White C Red E Yellow F Green G Blue 军用钮子开关价格查询全国统一热线 tuizer@.com (.) Dia.0 (9.).7 (7.9).70 (8.0). 7 (.) Dia.8 M P0.7 (.) Dia.8 0 Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

26 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series D IP8 防水钮子开关厂家 NKK PCB Mount Miniature TYPICL SWITCH DIMENSIS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Straight PC Single Pole D0P D0LP ctuator in Down Position Straight PC Double Pole D0P D0LP ctuator in Down Position Straight PC Four Pole (.) Dia.0 (.8) Dia.0 D0P D0LP ctuator in Down Position (.8) Dia.0 (.) Dia.0 (.8) Dia.0 (.) Dia.0 M P0.7 (0.). (7.).8 M P0.7 (7.9).70 (9.).7 M P0.7 M P0.7 (0.). (7.).8 M P0.7 (7.9).70 (9.).7 M P0.7 军用钮子开关价格查询全国统一热线 (0.). (7.9).70 (9.).7 (7.).8 (.).0 (.).0 (.9).7 (.).0 (.9).7 (.9).7 (.9).7 (.9).7 (.). (.9).7 (.). (.). (.). (.). (.). Typ.00 (0.8) Dia Typ.0 Typ.00 (0.8) Dia Typ.0 Typ.00 (0.8) Dia Typ.0 Typ.00 (0.8) Dia Typ.0 Typ.00 (0.8) Dia Typ.0 Typ.00 (0.8) Dia Typ.0 Typ.00 0 (7.0).7.00 (.) (.) (0.).0 (.).7 (0.).0 Typ.00 (.0) Dia Typ (.)Typ.00 (0.).0 (.).7 (0.).0 Typ.00 (.0) Dia Typ.09 (0.).0 (.).7 (0.).0 Typ.00 Typ.00 0 (.0) Dia Typ.09 tuizer@.com

27 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 PCB Mount Miniature TYPICL SWITCH DIMENSIS IP8 防水钮子开关厂家 NKK Series D (7.0).7 (7.0).7 (7.0).7 (7.0).7 (.8) Dia.0 (.) Dia.0 (.8) Dia.0 (.) Dia.0 (.8) Dia.0 (.) Dia.0 Straight PC Bracket Single Pole ctuator in Down Position D0B D0LB (.) Dia. (0.). (.) Dia. (0.). (.) Dia. (0.) (.8)..8 (.) Dia. (.8).8 (.) Dia. (7.9).70 (9.).7 (.8).8 (.) Dia. (7.9).70 (9.).7 (7.9).70 (.7). (.). (.7). (.). (.). (.). (.). (.). (.). (.). (.). (0.) Typ.0 (.).00 Typ.00 (0.8) Dia Typ.0 (.). (0.) Typ.0 (.).00 Typ.00 (0.8) Dia Typ.0 (0.) Typ.0 (0.) Typ.0 (.).00 Typ.00 (0.8) Dia Typ.0 (.).00 Typ.00 (0.8) Dia Typ.0 (0.) Typ.0 (.).00 Typ.00 (0.8) Dia Typ.0 (0.) Typ.0 (.).00 Typ.00 (0.8) Dia Typ.0 Typ.00 (0.7) Typ.08 (0.7) Typ.08 Straight PC Bracket Double Pole ctuator in Down Position D0B D0LB 0.00 (7.0) (.) (.).890 (0.7) Typ.08 (.).7 (0.).0 (.) Typ.00 Typ.00 (7.) Typ.00 (0.).0 (.)Typ.00 (.).7 (.0) Dia Typ.09 (.).7 (.).7 (9.) (.7) (.) (.).7... ctuator in Down Position D0B D0LB 军用钮子开关价格查询全国统一热线 (0.).0 (.) Typ.00 Typ.00 (7.) Typ.00 (.0) Dia Typ.09 (0.).0 (.) Typ.00 Typ.00 9 Typ (7.) Typ 0.00 (.0) Dia Typ.09 (.).7 (.).7 (0.).0 Straight PC Bracket Four Pole tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

28 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series D IP8 防水钮子开关厂家 NKK PCB Mount Miniature Right ngle PC Single Pole TYPICL SWITCH DIMENSIS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers D0H D0LH Right ngle PC Double Pole D0H D0LH (.).8 (0.).0 (0.7) Typ.08 (.).8 (0.).0 (.).8 (0.).0 (0.7) Typ.08 (0.).0 (.).8 (0.7) Typ.08 (0.7) Typ (.8) Dia.0 (.) Dia.0 (.8) Dia.0 (.) Dia.0 (.) Dia. (0.). (.) Dia. (0.). (.) Dia. (7.7).0 (7.7).0 (.) Dia. (.).0 (0.).0 (0.9).0 (.).00 (.).0 (0.).0 (0.9).0 (.).00 (0.).0 (0.9).0 (.).00 ctuator in Down Position (0.).0 (0.9).0 (.).00 ctuator in Down Position 军用钮子开关价格查询全国统一热线 (.).8 (0.8) Dia.0 (.).8 (0.8) Dia.0 (0.) (.).00.8 (0.8) Dia Typ.0 (.).00 (0.) (.).00.8 (0.8) Dia Typ.0 (.).00 (0.).0 (0.).0 (.) Typ.00 (.).7 (.).7 (7.0).7 (0.).0 Typ.00 Typ.00 (.).00 (.0) Dia Typ.09 (.).88 (0.).0 Typ.00 Typ.00 (.).00 (.).00 (.) Typ.00 (.0) Dia Typ.09 tuizer@.com

29 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 PCB Mount Miniature IP8 防水钮子开关厂家 NKK Series D TYPICL SWITCH DIMENSIS Vertical PC Single Pole (.) Dia. (0.) Typ.0 Rockers (0.).0 (.).8 (0.7) Typ.08 (0.).0 (.).8 (0.7) Typ.08 (0.).0 (.).8 (0.7) Typ.08 (0.).0 (.).8 (0.7) Typ (.8) Dia.0 (.) Dia.0 (.) Dia.0 (.8) Dia.0 (0.). (7.9).70 (9.).7 (7.7).0 (.) Dia. (.).0 (0.).0 (0.9).0 (.).00 (0.).0 (0.9).0 (.).00 ctuator in Down Position (.) Dia. (0.). (.) Dia. (7.9).70 (9.).7 (7.7).0 (0.).0 (0.9).0 (.).00 (0.).0 (0.9).0 (.).00 ctuator in Down Position (.).8 (.0).09 (0.).00 (0.8) Dia Typ.0 (.) Typ.00 (.).8 (.0).09 (0.).00 (0.8) Dia Typ.0 (.) Typ.00 (.).8 (.0).09 (0.).00 (0.8) Dia Typ.0 (.) Typ.00 (.).8 (.0).09 (0.).00 (0.8) Dia Typ.0 (.) Typ.00 军用钮子开关价格查询全国统一热线 (.).0 (7.0).7.00 (.).88 (.).7 (0.).0 (.).00 (.) Typ.00 (.) Typ.00 (.0) Dia Typ.09 (.).00 (0.).0 (.).7 (0.).0 (.) Typ.00 (.) Typ.00 (.0) Dia Typ.09 D0V D0LV Vertical PC Double Pole D0V D0LV tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

30 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series D IP8 防水钮子开关厂家 NKK PCB Mount Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Vertical PC Four Pole D0V D0LV TM Hex Nut Brass with nickel plating supplied (9.0). M P0.7 With Standard Hardware (8.0). (.) (.mm) for Standard Lever.0 (.mm) for Locking Lever (.).8 (.).8 (.) Dia. (.) Dia.087 (0.).0 (0.).0 STNDRD HRDWRE T07M Locking Ring Steel with zinc/chromate supplied (.7).07 (0.7) Typ.08 (0.7) Typ.08 (.0).079 (0.8).0 T09 Lockwasher Steel with zinc/chromate supplied (.) Dia. (0.) Dia.0 (0.).00 PNEL CUTOUTS & MXIMUM PNEL THICKNESS (.) TYPICL SWITCH DIMENSIS (.).7 (.0) Dia. (.8) Dia.0 (.0) Dia.7 (.) Dia.0 Without Bottom Hex Nut. (.9mm) for Standard Lever.0 (.8mm) for Locking Lever (.) Dia. (0.). (7.7).0 (.) Dia. (0.).0 (0.9).0 (.).00 ctuator in Down Position Without Locking Ring (0.).0 (0.9).0 (.).00.8 (.0mm) for Standard Lever.08 (.mm) for Locking Lever 军用钮子开关价格查询全国统一热线 (7.9).70 (9.).7 (.).0 (0.).00 (0.8) Dia Typ.0 (.) Typ.00 (.) Dia. (.).8 (.0).09 Typ.00 (.).8 (.0).09 (0.).00 (0.8) Dia Typ.0 (.) Typ.00 T0M Knurled Face Nut Brass with chrome plating (0.).0 (.).0 0 (.).890 OPTIL M P0.7 (0.0) Dia.9 (.7).07 (0.).0 Without Locking Ring & Bottom Hex Nut.8 (.7mm) for Standard Lever. (.mm) for Locking Lever (.)Typ (.).00 (.) Typ.00 (.0) Dia Typ.09 (.).7 (0.).0 Typ.00 (.) Typ.00 0 tuizer@.com

31 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series G IP8 防水钮子开关厂家 NKK Process Sealed Ultra-Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 80 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V C minimum for minute minimum Mechanical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits Electrical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits Nominal Operating Force: 0.9N for momentary &.0N for maintained ngle of Throw: 8 Materials & Finishes ctuator: Case: Sealing Rings: Movable Contacts: Stationary Contacts: Base: Terminals: Support Bracket: Environmental Data Operating Temperature Range: Humidity: Vibration: PCB Processing Shock: Soldering: Cleaning: Standards & Certifications Glass fiber reinforced polyamide Glass fiber reinforced polyamide Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Glass fiber reinforced polyamide Phosphor bronze with gold plating Phosphor bronze with tin plating C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering recommended: See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. utomated cleaning. See Cleaning specifications in Supplement section. The G Series toggles have not been tested for UL recognition or CS certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. 军用钮子开关价格查询全国统一热线 tuizer@.com

32 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Ultra-Miniature IP8 防水钮子开关厂家 NKK Series G Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Molded-in, epoxy sealed terminals lock out flux, solvents, and other contaminants. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smooth, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (dditional STC details in Terms & cronyms; see Supplement section.).00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing. Round terminals facilitate easier through-hole mounting on PC boards. Matching indicators available. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

33 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series G IP8 防水钮子开关厂家 NKK Process Sealed Ultra-Miniature TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Pole SP DP G Model G G G G8 G9 G G G G8 G9 Poles SPDT DPDT Slot SPDT -- Circuit Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Up Center Down Up Center Down () () NE NE NE NE.0 (.8mm) Column Toggle Circuits NE NE () 8 () () 9 () ( ) = Momentary () () () () () () DESCRIPTI FOR TYPICL ORDERING EXMPLE.0 (.8mm) Column Toggle GH POLES & CIRCUITS Slot ctuator.0 (.8mm) Column Toggle Note: - OPEN - SPDT - - OPEN - - DPDT CTUTOR Right ngle PC Terminals 军用钮子开关价格查询全国统一热线 (.8).0 8 (.7) Dia.07 (.0) Dia.7 H PC Terminals P Straight H Right ngle V Vertical Terminal numbers are not actually on the switch. (COM) (COM) tuizer@.com

34 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Ultra-Miniature PC TERMINLS IP8 防水钮子开关厂家 NKK Series G P H V Straight Right ngle (0.) Dia Typ.0 Slot Slot (0.) Dia Typ.0 (.).00 (.) Typ.00 (0.) Dia Typ.0 (.) (7.8).07 (.).09 (7.0).7 Slot (.).77 (.) Typ.00 8 (.7) Dia (.).0 (.7) Dia.07 (.8).0 (0.) Typ.00 (0.) Dia Typ.0 (.) Typ.00 (7.0).7 TYPICL SWITCH DIMENSIS (.0) Dia.7 (.).0 (7.0).7 Single & Double Pole (0.) Dia Typ.0 (.) Typ.00 (.).0 On single pole models, locations & are for support pins. (.8).0 (.7) Dia.07 (.).0 (.8).0 (.0) Dia.7.00 (.).0 (0.).0 (.0) Dia.7 (.0) (.7).0 Single & Double Pole (.).0 (0.).00 (.).00 Single & Double Pole (.).0 (0.) Typ.00 (.) Typ.00 (7.0).7 (.).77 (.).77 (.) Typ.00 (7.0).7 (.).00 (0.).0 (.9).9 (0.) Dia Typ.0 (.) Typ.00 (0.).0 (7.).9 (0.) Dia Typ.0 (.).00 军用钮子开关价格查询全国统一热线 (.).00 (0.) Dia Typ.0 (.).00 (0.) Dia Typ.0 (.) Typ.00 (0.) Dia Typ.0 (.) Typ.00 (0.) Dia Typ.0 (.).00 (0.) Dia Typ.0 (.).00 (0.) Dia Typ.0 C L Vertical (.) Typ.00 (0.) Typ.00 (.) Typ.00 (.) Typ (.) (.) Typ.00 (.) Typ.00 (.) Typ.00 (0.) Dia Typ.0 (7.0).7 (.).77 Straight PC G9P Right ngle PC G9H Vertical PC GV tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

35 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series G IP8 防水钮子开关厂家 NKK Fully Illuminated Ultra-Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force:.0N ngle of Throw: 8 Materials & Finishes ctuator: Case: Sealing Rings: Movable Contacts: Stationary Contacts: Base: Power Terminals: Lamp Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: PCB Processing Shock: Soldering: Cleaning: Standards & Certifications 80 milliohms maximum 00 megohms 00V DC 00V C minimum for minute minimum 00,000 operations minimum 00,000 operations minimum 0,000 operations 8V C/DC Polyamide Glass fiber reinforced polyamide Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Glass fiber reinforced polyamide Phosphor bronze with gold plating Phosphor bronze with gold plating C through + C ( F through + F) 90 ~ 9% humidity for 0 0 C (0 F) 0 ~ 00Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering recommended. See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. utomated cleaning. See Cleaning specifications in Supplement section. The G Series toggles have not been tested for UL recognition or CS certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. 军用钮子开关价格查询全国统一热线 tuizer@.com

36 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Fully Illuminated Ultra-Miniature IP8 防水钮子开关厂家 NKK Series G Distinctive Characteristics Rockers Fully illuminated toggle for highly visible status indication with LED in red, green, or amber for single color and red/green for bicolor. Ultra-miniature size allows high density mounting, and extremely light weight makes these switches ideal for handheld equipment. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Molded-in, epoxy sealed terminals lock out flux, solvents, and other contaminants. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smooth, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (dditional STC details in Terms & cronyms; see Supplement section.).00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing. Round terminals facilitate easier throughhole mounting on PC boards. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

37 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series G IP8 防水钮子开关厂家 NKK Fully Illuminated Ultra-Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Pole G SPDT DESCRIPTI FOR TYPICL ORDERING EXMPLE Pole Throw SPDT J Model G G GJHC Slot Clear Toggle Circuits NE Combines with single color or bicolor LEDs Combines with bicolor LED only TYPICL SWITCH ORDERING EXMPLE SPDT -NE- Circuit Clear Toggle, Red LED ctuator J Clear CTUTOR (.8).0 8 (.7) Dia.07 (.0) Dia.7 J H PC Terminals P H V Straight Right ngle Vertical Right ngle PC Terminals Toggle Position Connected Terminals Schematics Up Center Down Up Center Down NE LEDs are an integral part of the switch and not available separately. The electrical specifications shown are determined at a basic temperature of C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement; see Supplement Index. Slot - - POLES & CIRCUITS NE OPEN - - LED COLORS & SPECIFICTIS Colors C D F C LEDS Single Color Red mber Green -NE- only CF Bicolor Red/Green -NE- & -- Note: Terminal numbers are not actually on the switch. LED circuit is isolated and requires an external power source. (COM) () () () Single Color Single Color Bicolor Bicolor () Red () Green Red mber Green Red/Green Forward Peak Current I FM m m m m/m Typical Forward Current I F 0m 0m 0m 0m/0m Forward Voltage V F.0V.V.V.0V/.V Reverse Peak Voltage V RM V V V V/V Current Reduction Rate bove C I F 0.m/ C mbient Temperature Range 军用钮子开关价格查询全国统一热线 C D F CF ~ + C tuizer@.com

38 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Fully Illuminated Ultra-Miniature PC TERMINLS IP8 防水钮子开关厂家 NKK Series G P H V Straight Right ngle Slot (0.) Dia Typ.0 (.) Typ.00 (0.) Dia Typ.0 (.).77 (7.0).7 (.).77 (.) Typ.00 8 (.).0 (.7) Dia.07 (.8).0 (0.) Typ.00 (0.) Dia Typ.0 (.) Typ.00 (7.0).7 (.).77 (.) Typ.00 TYPICL SWITCH DIMENSIS (.0) Dia.7 (.).0 (7.0).7 (0.) Dia Typ.0 (.) Typ.00 (.).0 Vertical (.) Typ.00 (0.) Typ.00 (.) Typ.00 (0.) Dia Typ.0 Straight PC & are LED terminals; is a support pin on single color models & an LED terminal on bicolor models. GJPC Right ngle PC & are LED terminals; is a support pin on single color models & an LED terminal on bicolor models. GJHD Slot (0.) Dia Typ.0 (.) (7.8).07 (.).09 Slot (.7) Dia (.8).0 (.7) Dia.07 (.).0 (.8).0 (.0) Dia.7.00 (.).0 (0.).0 (.0) Dia.7 (.0) (.7).0 (.).0 (0.).00 (.).00 (.).0 (0.) Typ.00 (.) Typ.00 Vertical PC & are LED terminals; is a support pin on single color models & an LED terminal on bicolor models. GJVCF (7.0).7 (7.0).7 (.).00 (0.).0 (.9).9 (0.) Dia Typ.0 (.) Typ.00 (7.).9 (0.) Dia Typ.0 (.).00 军用钮子开关价格查询全国统一热线 (.).77 (0.).0 (.).00 (0.) Dia Typ.0 (.) Typ.00 (0.) Dia Typ.0 (.).00 (0.) Dia Typ.0 (.) Typ (.) (.) Typ.00 (7.0).7 (.).77 tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

39 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series GT IP8 防水钮子开关厂家 NKK Process Sealed Ultra-Miniature SMT Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: See Supplement section for explanation of operating range. Other Ratings Contact Resistance: 80 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V C minimum for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum Nominal Operating Force:.N for momentary &.7N for maintained ngle of Throw: 8 Materials & Finishes ctuator: Case: Sealing Rings: Movable Contacts: Stationary Contacts: Base: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Installation Processing Shock: Mounting: Coplanarity: Soldering: Cleaning: Standards & Certifications Flammability Standard: Polyphenylene sulfide (UL9V-0) Polyphenylene sulfide (UL9V-0) Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Polyphenylene sulfide (UL9V-0) Phosphor bronze with gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ 00Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) It is recommended that the body of models for upright mounting without bracket be fastened to a panel or similar support for protection of solder joints from mechanical stress. See specifications in Terms & cronyms in Supplement section Reflow Soldering recommended. See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. utomated cleaning. See Cleaning specifications in Supplement section. UL9V-0 actuator, case & base The GT Series toggles have not been tested for UL recognition or CS certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. 军用钮子开关价格查询全国统一热线 tuizer@.com

40 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Ultra-Miniature SMT IP8 防水钮子开关厂家 NKK Series GT Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Tape-reel and stick-tube packaging allow rapid automated placement of surface mount devices. Tape-reel packaging meets EI-8-D Standard. Heat resistant resin used for housing, base, and lever allows vapor phase and infrared convection reflow soldering. Combination of design features achieves total seal and allows automated processing techniques, including flux cleaning procedures: one-piece bushing and housing, rubber seals surrounding actuator and base, epoxy at joint of case and base, and molded-in, epoxy-sealed terminals. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (dditional STC details in Terms & cronyms; see Supplement section.) Gull-wing terminals provide mechanical stability during soldering and simplified solder joint inspection. Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of.009 (0.mm). (dditional coplanarity details in Terms and cronyms in the Supplement section.) 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

41 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series GT IP8 防水钮子开关厂家 NKK Process Sealed Ultra-Miniature SMT TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Pole SP DP Poles SPDT DPDT Circuits NE NE () 8 () () 9 () ( ) = Momentary GT Model GT GT GT GT8 GT9 GT GT GT GT8 GT9 Slot Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Up Center Down Up Center Down () ().0 (.8mm) Column Toggle P B H NE NE NE NE () () () () () () H ctuator.0 (.8mm) Column Toggle Terminals Gull Wing for Upright Mount Gull Wing for Upright with Bracket Mount Gull Wing for Right ngle Mount DESCRIPTI FOR TYPICL ORDERING EXMPLE GTH SPDT -NE- Circuit.0 (.8mm) Column Toggle POLES & CIRCUITS Note: - OPEN - SPDT - - OPEN - - DPDT CTUTOR (.7) Dia.07 (.0) Dia.7 军用钮子开关价格查询全国统一热线 Slot (.8).0 8 R S No Code Gull Wing Terminals for Right ngle Mount Terminal numbers are not actually on switch. Packaging Tape-Reel for Right ngle Only 00 Pieces/Reel Stick-Tube for Upright Mount 0 Pieces/Stick Partitioned Tray for Upright & Right ngle ny Quantity Packaging details at end of GT Series (COM) (COM) tuizer@.com

42 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Ultra-Miniature SMT TYPICL SWITCH DIMENSIS IP8 防水钮子开关厂家 NKK Series GT (0.) Typ.0 Slot (0.) Typ.0 Slot (0.) Typ.00 (.0).97 (.0).97 (8.). Single & Double Pole Single & Double Pole Single Pole Upright Mounting GTP Upright Mounting with Bracket Double Pole GTB Right ngle Mounting GTH Pad Layouts for Upright Mounting Upright Mounting with Bracket Right ngle Mounting Surface Mount (.8) Terminals.0 Single Pole Double Throw Double Pole Double Throw Slot (.7) Dia.07 (.8).0 (.7) Dia.07 (.0) Dia.7 (.8).0 (.7) Dia.07 (.).09 (.8).0 (.7) Typ.07 (.) Typ.00 (0.).0 (0.7) Typ.08 (.7) Typ.07 (.) Typ.00 (0.) Typ.0 (0.7) Typ.08 (.0) Dia.7 (0.7).08 (.).09 (9.0). (.0) Dia.7 (0.7).08 (.).09 (9.0). (9.0). (.0). (.0). (0.) Typ.00 (0.).00 (0.) Typ.00 (0.).00 (.8) Typ.0 (.) Typ.00 (0.) Typ.00 (0.9) Typ.0 (0.).0 (0.) Support Pads Support Legs.00 Support Legs.00 (0.9) Typ.0 (.) Typ.09 (.0). (.) Typ.00 (7.).99 (.8).0 (7.).99 (.7) Typ.07 (0.).0 (0.7) Typ.08 (.7) Typ.07 (.) Typ.00 (0.) Typ.0 (0.7) Typ.08 (8.). (0.) Typ.00 (.) Typ.07 (.0). (0.) Typ.00 (.).9 (0.).00 (.0). (.8).0 (.0). (.) Typ.0 (0.9) Typ.0 (.) Typ.0 (.) Typ.0 Suppor Pads.00 (9.7).8 (9.7).8 (.) Typ.0 军用钮子开关价格查询全国统一热线 (7.).99 (.8).0 (7.).99 (8.). (0.) Typ.00 (.) Typ.07 (.0). (0.) Typ.00 (.).9 (0.).00 (.) Typ.0 (.8).0 (.7) Typ.07 (.) Typ.00 (9.7).8 (0.).0 (0.7) Typ (.) Typ.08.0 (.0).8 (.) Typ.0 (9.7).8 (.8).0 (.) Typ.0 (.0).8 (.7) Typ.07 (.7) Typ.00 (0.) Typ.0 (0.7) Typ.08 tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

43 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series GT IP8 防水钮子开关厂家 NKK Process Sealed Ultra-Miniature SMT PCKGING Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers R S No Code Tape-Reel for Right ngle 00 pieces per reel Switches must be ordered in 00-piece increments when tape-reel packaging is selected. This packaging meets EI-8-D Standard for mm and mm Embossed Carrier Taping of Surface Mount Components for utomatic Handling. Stick-Tube for Upright Mount 0 pieces per stick Switches must be ordered in 0-piece increments when stick-tube packaging is selected. Partitioned Tray for Upright & Right ngle ny quantity If the G upright models are ordered in less than 0-piece increments or the right angle models in less than 00-piece increments, the switches are packaged in a partitioned tray. No code is required. 军用钮子开关价格查询全国统一热线 tuizer@.com

44 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Ultra-Miniature SMT PCKGING (CTINUED) IP8 防水钮子开关厂家 NKK Series GT Tape-Reel Packaging for Right ngle Mount Each tape-reel of 0 pockets contains 00 switches. Rockers (.0) Dia. (.0) Typ.079 Overall Dia (0.0).0 L = Length GT Upright (code P) 8. (mm) Minimum Leader Length: 7.87 (00mm) Minimum Trailer Length:.97 (0mm) Reel Dimensions GT Upright with Bracket (code B). (0mm) (.0) Dia.87 (78.9) Dia.090 (.0).079 (.).9 Stick-Tube Packaging for Upright Mount (7.7).0 (9.8).8 (.7).09 (.). (.0).9 (.0) Typ.079 (.) Dia Typ.08 (.0) Typ.0 Direction of Feed Each stick-tube contains 0 switches. (.0) Typ.7 Tape Dimensions Stick-Tube Dimensions 军用钮子开关价格查询全国统一热线 (.).0 L (.) Dia Typ.09 Part No. Terminal # (0.).0 (7.8).70 (.0).079 (.0). (.9).7 (8.).9 (.) R.09 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

45 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M General Specifications IP8 防水钮子开关厂家 NKK Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity (Resistive Load) Power Level V C 0V 0V DC for On-None-On & 0V DC for all other circuits Logic Level (gold): 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Logic/Power Level (gold over silver): Combines silver & gold ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum for silver; 0 milliohms maximum for gold Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V C minimum between contacts for minute minimum;,00v C minimum between contacts and case for minute minimum Mechanical Life: 00,000 operations minimum; 0,000 operations minimum for flat, locking & splashproof devices Electrical Life:,000 operations minimum for silver; 0,000 operations minimum for gold; 0,000 operations minimum for silver V C ngle of Throw: Materials & Finishes Toggle: Brass with chrome plating Frame: Stainless steel Bushing: Brass with nickel plating Support Bracket: Brass with tin plating Case: Diallyl phthalate resin (UL9V 0) Movable Contactor: Phosphor bronze with silver or gold plating Movable Contacts: Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code ) Stationary Contacts: Silver with silver plating (code W); copper or brass with gold plating (code G); or silver with gold plating (code ) Terminals: Copper or brass with silver plating; or copper or brass with gold plating Environmental Data Operating Temp Range: 0 C through +8 C ( F through +8 F) Humidity: 90 ~ 9% humidity for 9 0 C (0 F) Vibration: 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours Shock: 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Sealing: Splashproof bushing options B, D, D8, L, & L8, which have o-rings inside & outside the bushing, meet IP7 of IEC09 Standards. Installation Processing Mounting Torque:.0Nm (. lb in) double nut for large bushing;.nm ( lb in) double nut & 0.7Nm ( lb in) single nut for all other bushings Soldering: Wave Soldering (PC version) for Gold: See Profile in Supplement section. Manual Soldering for Gold: See Profile in Supplement section. Wave Soldering (PC version) for Silver: See Profile B in Supplement section. Manual Soldering for Silver: See Profile B in Supplement section. Note: Lever must be in (center) position while soldering. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL9V 0 for case UL: File No. E - Recognized only when ordered with marking on switch. dd /U or /CUL before dash in part number to order UL recognized switch. ll models recognized V 0V C or 0.V 8V DC maximum. CS: File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C before dash in part number to order CS certified switch. ll models certified V C 0V C or 0.V 8V maximum. 军用钮子开关价格查询全国统一热线 tuizer@.com

46 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Miniature IP8 防水钮子开关厂家 NKK Series M Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggle has two flatted sides which fit into a complementary opening inside bushing. ntijamming design protects contacts from damage due to excessive downward force on actuator. High torque bushing construction prevents rotation or separation from frame during installation. High insulating barriers increase isolation of circuits in multipole devices and provide added protection to contact points. Molded diallyl phthalate case has a UL flammability rating of 9V-0. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Prominent external insulating barriers increase insulation resistance and dielectric strength. Interlocked actuator block, lever, and interior guide prevent switch failure due to biased lever movement. Clinching of frame to case well above base and terminals provides,00v dielectric strength. ctual Size 军用钮子开关价格查询全国统一热线 Bushing Mount Bracket PC Mount ngle PC Mount Page 8 Page 0 Page tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

47 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Bushing Mount Miniature TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers M0 Poles SPST SPDT DPST DPDT SPT PDT PDT DPT Circuits * NE NE NE () 8 () () 9 () ** ** () () ** 7 () ( ) = Momentary * -NE- circuit available in - and -pole only. ** - circuits S S W 0 Small S. (0.mm) Bat S.00 (.08mm) Bat S. (.mm) Bat E.0 (.mm) Flatted * E. (.mm) Flatted E.80 (.mm) Flatted * Q.0 (.0mm) Cone * Q.0 (.mm) Cone * Q.80 (.mm) Cone * C.7 (.mm) Color Tipped Cone D.80 (.mm) Color Capped Cone Specify cap color for toggles C & D at the end of the part number. * vailable on - and -pole only. B B R L IMPORTNT: Switches are supplied without UL, culus & CS marking unless specified. UL, culus & CS recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. Large. (.mm) Large Bat.89 (7.mm) Large Bat.0 (.mm) Large Flatted Locking Lever.0 (.mm) Dia. Locking Lever S S S D D D D8 B B L L L L L8 Small Bushings.0 (8.9mm) Threaded with mm.0 (8.9mm) Threaded with.0 (8.9mm) Smooth with.80 (7.mm) Threaded with.80 (7.mm) Smooth with.0 (8.9mm) Threaded with D Flat mm.0 (8.9mm) Threaded with D Flat.0 (8.9mm) Threaded Splashproof with D Flat (combines only with S, S & S) mm.0 (8.9mm) Threaded Splashproof with D Flat (combines only with S, S & S) Large Bushings Large.7 (mm) Threaded with Large.7 (mm) Threaded Splashproof with D Flat Bushings For Locking Levers.9 (7.mm) Threaded with for Lever Lock mm.9 (7.mm) Threaded with for Lever Lock Smooth with for Lever Lock.9 (7.mm) Threaded Splashproof with D Flat for Lever Lock mm.9 (7.mm) Threaded Splashproof with D Flat for Lever Lock 军用钮子开关价格查询全国统一热线 Contact Materials & Ratings Silver; Rated V C 0V C Gold; Rated G 0.V 8V C/DC max Gold over Silver; V C & 0.V 8V C/DC max Terminals 0 Solder Lug* 0 Quick Connect 0.0 (.mm) Straight PC 0. (0.8mm) Wirewrap 0.70 (9.0mm) Wirewrap 07.9 (.mm) Wirewrap 08.0 (7.0mm) Wirewrap * Wire harness & cable assemblies offered only in mericas DESCRIPTI FOR TYPICL ORDERING EXMPLE. (0.mm) Bat Toggle / 0.0 (8.9mm) Threaded Bushing with Silver Contacts with mp Rating B C R V No Code C G M0SSW0 Optional Caps For Small Bat For S Bat Toggle Conical Cap for S Bat Toggle For Large Bat For B Toggle For B Toggle Cap for Locking Lever Nickel Plated Supplied with Switch Black Red Blue SPDT -- Circuit Solder Lug Terminals B C E F G H Cap Colors Black White Red Yellow Green Blue Gray (for K & K paddles) tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

48 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Bushing Mount Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Pole Model The SPT model utilizes a double pole base. External Conn External connection must be made during field installation. (out) (out) 军用钮子开关价格查询全国统一热线 (out) POLES & CIRCUITS Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Down Center Up Down Center Up SP M0 NE - OPEN OPEN SPST SP M0 M0 M0 M08 M09 () NE NE () () () - OPEN - SPDT DP M0 NE - - OPEN OPEN DPST DP P P M0 M0 M0 M08 M09 M0 M0 M0 M08 M09 M0 M0 M0 M08 M09 () () () NE NE NE NE NE NE () () () () () () () () () - - OPEN - - DPDT Common (in) OPEN OPEN For Throw (-On) Connected Terminals & Schematic Note: PDT PDT The DPT model utilizes a four pole base. External connection must be made during field installation. Terminal numbers are not actually on the switch. (COM) 8 External Conn Common (in) (out) (COM) (out) (COM) (out) (COM) (COM) 7 (out) (COM) Pole Model Down Center Up Down Center Up SP DP M0 M0 M07 M0 M0 M07 () () () () () () External Connection (in) (out) (out) (out) External Connection (in) (out) (out) (out) External External Connection Connection (in) 8 (in) External External Connection Connection (in) 8 (in) External Connection (in) (out) (out) (out) (out) External External Connection Connection (in) 8 (in) (out) (out) (out) 7 (out) 9 0 (out) (out) (out) (out) (out) 7 (out) 9 0 (out) (out) (out) (out) (out) 7 (out) 9 0 (out) (out) Common (in) (out) tuizer@.com 0

49 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Bushing Mount Miniature SMLL TOGGLES IP8 防水钮子开关厂家 NKK Series M Important: Toggle length changes based on bushing selected. ll illustrations are shown with.0 long bushing. When using a.80 long bushing, toggle length increases.070. E.00 Q (.) Dia. (.0).0 Cap Colors vailable:.0 (.mm) Flatted (.).00 (.).0.0 (.0mm) Cone Black B S E (.). Q (.) Dia. White. (0.mm) Bat (.8) Dia.0 (.).0 (0.).. (.mm) Flatted (.).098 (.)..0 (.mm) Cone C Only vailable in - & -Pole Red E Yellow S E (.0).97 Q (.) Dia. (.).80 F.00 (.08mm) Bat (.7) Dia.0.00 Standard Material & Finish: Brass with Bright Chrome Contact factory for optional finishes..80 (.mm) Flatted (.).098 (.).80 Only vailable in - & -Pole.80 (.mm) Cone Only vailable in - & -Pole Green 军用钮子开关价格查询全国统一热线 G Blue S.7 (.mm) C Color Tipped Cone Supplied with Cap T Material: Polycarbonate (.0) Dia.8 (.).7 (.) Dia. (.).80 (.).77 (.). Only vailable in - & -Pole.80 (.mm) D Color Capped Cone Supplied with Cap T0 Material: Polyethylene H (.7) Dia.0 (.).. (.mm) Bat Only vailable in - & -Pole Gray (For K & K only) tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

50 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Bushing Mount Miniature SMLL BUSHINGS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers S (.).098 (.).098 /-0.0 (8.9mm) Threaded with (8.0) Dia. (0.8).0 /-0.80 (7.mm) Threaded with (8.0) Dia. (0.8).0 /-0 Thd (0.9).0 (8.9).0 Maximum Panel Thickness with Standard Hardware:.0 (.mm) /-0 Thd (0.9).0 (7.).80 S (.).098 When using this bushing, toggle length is increased by.070. Maximum Panel Thickness with Standard Hardware:.0 (0.8mm) D (.).098 D8 /-0.0 (8.9mm) Threaded with D Flat (8.0) Dia. /-0 Thd mm/.0 (8.9mm) Threaded Splashproof with D Flat (.) Dia. (0.9).0 (8.9).0 Maximum Panel Thickness with Standard Hardware:.0 (.mm) (.).098 (0.0) Dia.9 M P0.7 (.).09 (8.9).0 D8 combines only with S, S & S toggles. Maximum Panel Thickness with Standard Hardware:.9 (.9mm) For S, S,, or S Bushing with & for L or L Bushing (0.).0 (.).0 mm/.0 (8.9mm) Threaded with (8.0) Dia. (0.8).0 M P0.7 (0.9).0 (8.9).0 Maximum Panel Thickness with Standard Hardware:.0 (.mm) D (.).098 Hardware and Quantity mm/.0 (8.9mm) Threaded with D Flat (8.0) Dia. For S, or S Bushing with Locking Ring & for L or L Bushing M P0.7 (0.9).0 (8.9).0 (.) Dia. (.) Dia (7.mm) Smooth with (.).098 Maximum Panel Thickness with Standard Hardware:.0 (.mm) (.). (8.0) Dia. (0.8).0 S (.) (8.9mm) Smooth with (0.8).0 (8.0) Dia. (.) Dia. (0.9).0 (7.).80 When using this bushing, toggle length is increased by.070. D (.).098 (.) Dia. (.) Dia. (0.9).0 (8.9).0 /-0.0 (8.9mm) Threaded Splashproof with D Flat (0.0) Dia.9 Standard Hardware Supplied for Small Bushings 军用钮子开关价格查询全国统一热线 /-0 Thd (.).09 (8.9).0 D combines only with S, S & S toggles. Maximum Panel Thickness with Standard Hardware:.9 (.9mm) Bushing Codes S/S D/D D/D8 L/L L/L8 Hex Nut Locking Ring Lockwasher 0 0 O-ring For D, D, D or D8 Bushing with D Flat & for L or L8 Bushing (.8).8 tuizer@.com

51 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Bushing Mount Miniature LRGE TOGGLES IP8 防水钮子开关厂家 NKK Series M Toggle & Bushing Combinations: These toggles combine with the mm bushings B & B. B. (.mm) Large Bat B.89 (7.mm) Large Bat R.0 (.mm) Large Flatted Rockers B (.0) Dia. (.). Large.7 (.0mm) Threaded with (.8).07 (.).0 (.9).9 M P (.0).7 Maximum Panel Thickness with Standard Hardware:. (.mm) (.0) Dia. (7.).89 Standard Hardware for B: hex face nut T0M, locking ring T0M, lockwasher T08, and hex backup nut T7M For B Bushing with (.).00 (.) Dia.9 (.). Standard Material & Finish: Brass with Bright Chrome Optional Finishes: Contact factory for satin chrome or black. LRGE BUSHINGS For B Bushing with Locking Ring Panel Cutouts (0.9).9 (.) Dia.9 (.0) Dia.8 (9.0). (8.0) Dia.709 军用钮子开关价格查询全国统一热线 B (.). Large.7 (.0mm) Threaded Splashproof with D Flat (.).0 (.).0 M P (.0).7 Maximum Panel Thickness with Standard Hardware:. (.mm) Standard Hardware for B: hex face nut T0M and o-ring T0P For B Bushing with D Flat (.0).079 (.).7 (.) Dia.9 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

52 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Bushing Mount Miniature LOCKING LEVER & BUSHINGS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers LL Locking Mechanism /-0.9 (7.mm) Threaded with (8.0) Dia. (.) Dia.0 (.) (8.0).0. (.0).9 (9.7).8 (7.).9 No Code (0.8).0 (.).098 (.) Dia.8 /-0 Thd (0.9).0 LL mm/.9 (7.mm) Threaded with Maximum Panel Thickness with Standard Hardware:.07 (.mm) Standard Hardware for L & L: hex nuts TH or TM, locking ring T07H or T07M, and lockwasher T09 LL /-0.9 (7.mm) Threaded Splashproof with D Flat (0.0) Dia.9 (.) Dia.0 (.) (8.0).0. (.0).9 (9.8).8 (7.).9 on-none-on positions lock Supplied with Cap T7 (.).098 (.) Dia.8 /-0 Thd Lever Material & Finish: Brass with Chrome Plating on-none-(on) Lever on-off-(on) on-on-(on) Cap Material: Brass with Nickel Plating Black 军用钮子开关价格查询全国统一热线 (.).09 (8.0) Dia. (.) Dia.0 (.) (8.0).0. (.0).9 (9.7).8 (7.).9 (.) Dia.8 M P0.7 LL8 LL Smooth with (8.0) Dia. (.) Dia.0 (.) (8.0).0. (.0).9 (9.) (7.0)..7 mm/.9 (7.mm) Threaded Splashproof with D Flat Maximum Panel Thickness with Standard Hardware:.07 (.mm) Standard Hardware for L and L8: hex nut TH or TM and o-ring T (0.8).0 (.).098 (0.9).0 (0.0) Dia.9 (.) Dia.0 (.) (8.0).0. (.0).9 (9.8).8 (7.).9 on-off-on on-on-on (on)-off-(on) (on)-on-(on) position locks positions lock positions lock position locks Color Codes for Optional nodized luminum Caps C (.).098 (.) Dia.8 Red M P0.7 (.).09 (0.8).0 (.).098 (.) Dia.8 (.) Dia. G (0.9).0 Blue tuizer@.com

53 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Bushing Mount Miniature CTCT MTERILS & RTINGS IP8 防水钮子开关厂家 NKK Series M W G Silver over Silver Power V C 0V C Gold over Brass or Copper Logic V C 0V C Rockers B TERMINLS (.0) 0 Solder Lug Epoxy Seal.7.0 (.mm) Straight PC (.0).079. (0.8mm) Wirewrap or Extended PC.70 (9.0mm) Wirewrap or Extended PC (.).0 Thk = (0.8).0 (.0).079 (.7) Typ.8 (.8) Dia Typ.07.9 (.mm) Wirewrap or Extended PC.0 (7.0mm) Wirewrap or Extended PC If using as extended PC terminal, refer to the above footprints. T Lever Cap for S Bat Toggle Material: Polyethylene (.0) Dia.97 Epoxy Seal (.) (.8).0.89 (.). (.7).0 Thk = (0.8).0 (.0).7 Note: See Supplement section to find complete explanation of operating range. Gold over Silver Power V C or Logic Level or 0.V 8V C/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. C.0 (.7mm) Wide Quick Connect Single Pole Double Pole Three Pole Four Pole OPTIL CPS & CP COLORS T Conical Cap for S Bat Toggle Material: Polyethylene (.8) Dia.89 R 7 Epoxy Seal T Lever Cap for B Toggle Material: Polyvinyl Chloride Cap Colors vailable: B C E Black White Red Yellow 军用钮子开关价格查询全国统一热线 (.). (.). (.8).89 (.7) Typ.8 (.8) Dia Typ.07 (.) Dia.0 (.).8 (.8) Typ.89 9 (.7) Typ 8.8 (.8) Dia Typ.07 Thk = (0.8).0 (.). F (.7).00 V Epoxy Seal Thk = (0.8).0 (.).0 (.7).0 7 (.8) Typ.89 9 (.7) Typ.8 (.8) Dia Typ.07 Dimension = terminal lengths as shown beside the terminal codes at the left. 8 0 T0 Lever Cap for B Toggle Material: Polyvinyl Chloride (8.0) Dia. (8.).78 G (8.0).709 Green Blue tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

54 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Bushing Mount Miniature Solder Lug TYPICL SWITCH DIMENSIS Single Pole Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers M0SSW0 M0 model does not have terminal. Solder Lug Double Pole M0SSW0 M0 model does not have terminals &. Solder Lug M0SSW0 Solder Lug M0SSW0 (7.9). (.7).00 (7.).89 (.).878 (.8) Dia.0 (.8) Dia.0 (.8) Dia.0 (.8) Dia.0 Three Pole Four Pole /-0 Thd (0.). /-0 Thd (0.). /-0 Thd (0.). /-0 Thd (0.9).0 (8.9).0 (0.9).0 (8.9).0 (9.).7 (9.).7 (.).77 (.).77 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.) Typ.00 (.) x (.0) Typ.0 x.079 军用钮子开关价格查询全国统一热线 (0.). (0.9).0 (8.9).0 (0.9).0 (8.9).0 (.). (.). (.7) Typ.8 (0.8) Typ.0 (0.) Typ.00 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.) Typ.00 (.).77 (.) x (.0) Typ.0 x.079 (.7) Typ.8 (0.8) Typ.0 (0.) Typ.00 (.).77 (.8) Typ (.8) Typ.89 (.0) (.8).89 (.0). (.0). (.0) Typ.079 (.0). (.0) Typ.079 (.0). (.0) Typ.079 tuizer@.com

55 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Bushing Mount Miniature IP8 防水钮子开关厂家 NKK Series M TH for Inch TM for Metric Hex Nut Brass/Nickel (9.0). /-0 Thd or M P0.7 (8.0). (.).09 T0M Hex Face Nut Brass/Chrome (.0).0 M P (.). (.).09 STNDRD HRDWRE FOR SMLL & LRGE BUSHINGS T07H for Inch T07M for Metric Locking Ring Steel with Zinc/Chromate T0M Locking Ring Steel with Zinc/Chromate (.8).0 (.8).0 T08 Lockwasher Steel with Zinc/Chromate (not supplied with splashproof models) T09 Lockwasher Steel with Zinc/Chromate (not supplied with splashproof models) OPTIL SPLSHPROOF BOOTS T7M Hex Nut Steel with Nickel Plating T O-ring for Splashproof Models Nitrile Butadiene Rubber (.78).070 T0P O-ring for Splashproof Models Nitrile butadiene rubber Various optional nuts and - plates are available; dimensions are shown in the ccessories & Hardware section. T8 (M-metric H-Inch). (.mm) Boot for S Toggle Silicon Rubber (9.8).8 (.). (.). (9.).7 (.) Dia.8 (.7) Dia. (0.8). (.0).079 (.7).0 (.0).079 (.7).07 (.) Dia.7 ~ (.). (.).098 (.) or.9 (8.) Dia.77 (.0).09 (.0) Dia or.0 T0/H/S. (.7mm) Boot, Nut and O-ring for B Toggle More details in ccessories section (0.0) (.7).9 (.)..0 (.0) Dia.0 (.0) Dia.7 (0.8).0 (.0).09 (.).0 (9.).70 (.8).97 (.).7 (.8) Dia. T0.70 (9.mm) Boot for B Toggle Silicon Rubber (7.0) Dia.9 (7.) Dia.89 (0.).00 (8.0) Dia. (.8) Dia. (0.).00 (.) Dia.88 (8.0) Dia.709 (.) Dia. (.0) (.).8 ~.8 (.7).0 (0.) Dia.0 (0.).00 (.0).0 M P (.0). (.0).079 T0S.7 (.mm) Boot for B Toggle Silicon Rubber (0.).09 (.).7 (8.9).7 (0.).00 T8.7 (8.mm) Boot, Nut and O-ring for B Toggle More details in ccessories section (.8).8 (8.).7 (.).97 军用钮子开关价格查询全国统一热线 (.).8 ~ (.7).0 (.).7 (.0).09 (8.0) Dia. (.8) Dia. (.) Dia.8 (8.0) Dia. (.7) ~ (.).80.8 (.7).0 (.07) Dia.9 (9.) Dia.79 (.) Dia.7 (7.) Dia.89 (.).09 (.) Dia.88 (8.0) Dia.709 (.0) (.).8 ~.8 (.7).0 tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

56 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Bracket PC Mount Miniature TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers M0 Poles SPDT DPDT SPT Circuits NE NE () 8 () () 9 () * * () () * 7 () ( ) = Momentary * - circuits IMPORTNT: S S S E E E Q Q Q Switches are supplied without UL, culus & CS marking unless specified. UL, culus & CS recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. Small. (0.mm) Bat.00 (.08mm) Bat. (.mm) Bat.0 (.mm) Flatted. (.mm) Flatted.80 (.mm) Flatted.0 (.0mm) Cone.0 (.mm) Cone.80 (.mm) Cone Toggle dimensions are based on use with a.0 (8.9mm) bushing; add.070 (.78mm) to toggle length when combining with a.80 (7.mm) bushing L Locking Lever.0 (.mm) Dia. Locking Lever S S S L Standard Toggle & Bushing Combinations: SS & S S Small Bushings.80 (7.mm) Smooth with.0 (8.9mm) Smooth with.80 (7.mm) Threaded with.0 (8.9mm) Threaded with Deduct bracket thickness of.00 (0.mm) from above dimensions Bushing For Locking Levers Smooth with for Lever Lock 军用钮子开关价格查询全国统一热线 Contact Materials & Ratings Silver; Rated V C 0V C Gold; Rated G 0.V 8V C/DC max Gold over Silver; V C & 0.V 8V C/DC max 7 G B C Terminals With Bracket.0 (.mm) Straight PC with. (.8mm) Bracket. (0.8mm) Straight PC with.0 (.0mm) Bracket.9 (.mm) Straight PC with.0 (9.mm) Bracket With Reinforced Bracket.0 (.mm) Straight PC with. (.8mm) Bracket. (0.8mm) Straight PC with.0 (.0mm) Bracket.70 (9.0mm) Straight PC with.9 (.mm) Bracket B C No Code C G DESCRIPTI FOR TYPICL ORDERING EXMPLE Gold Contacts with 0.V Rating.0 (.mm) Straight PC Terminals with Bracket. (.8mm) Long Optional Caps For S Bat Toggle Conical Cap for S Bat Toggle Cap for Locking Lever Nickel Plated Supplied with Switch Black Red Blue M0SSG-BC B C E F G Cap Colors Black White Red Yellow Green Blue Red Cap on. (0.mm) Bat Toggle.0 (8.9mm) Smooth Bushing with DPDT -NE- Circuit tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

57 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Bracket PC Mount Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Pole SP DP Pole SP (.). Important: Toggle length changes based on bushing selected. ll illustrations are shown with.0 (8.9mm) long bushing. When using a.80 (7.mm) long bushing, toggle length increases.070 (.78mm). Standard Material & Finish: Brass with Bright Chrome Contact factory for optional finishes. E Model M0 M0 M0 M08 M09 M0 M0 M0 M08 M09 Model M0 M0 M07. (.mm) Flatted (.).098 (.). Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Down Center Up Down Center Up Note: Terminal numbers are not actually on the switch. () () E NE NE NE NE (.0) (.mm) Flatted (.).098 (.).80 () () () () () () POLES & CIRCUITS - OPEN - SPDT - - OPEN - - DPDT For Throw (-On) Connected Terminals & Schematics Down Center Up () External Connection (in) (out) (out) (out) SMLL TOGGLES Q.0 (.0mm) Cone (.) Dia. (.0).0 () () S (out) (out) (out) (.8) Dia.0 External Connection (in) (0.).. (0.mm) Bat S (.7) Dia.0.00 External Connection (in) (out) (out) (out).00 (.08mm) Bat Q S (.7) Dia.0.0 (.mm) Cone (.) Dia. 军用钮子开关价格查询全国统一热线 (.). (.).0 External connection must be made during field installation. External Connection The SPT model utilizes a double pole base.. (.mm) Bat External Conn E.00 Q (out) (.) Dia. (.).80 (COM) (out) (COM) (.).00 (.).0 (out).0 (.mm) Flatted Common (in).80 (.mm) Cone tuizer@.com

58 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Bracket PC Mount Miniature SMLL BUSHINGS IP8 防水钮子开关厂家 NKK Series M.80 (7.mm) Smooth with (0.8).0 (.) Dia. (0.9).0 S.0 (8.9mm) Smooth with (0.8).0 (.) Dia. (0.9).0 Rockers (8.0) Dia. (8.0) Dia. For, S,, or S Bushing with LL (.) Dia.0 (.).098 When using this bushing, toggle length is increased by.070 (.78mm)..80 (7.mm) Threaded with When using this bushing, toggle length is increased by.070 (.78mm). Maximum Panel Thickness with Standard Hardware:.0 (0.8mm) (.) (8.0).0. (.0).9 (9.) (7.0)..7 (0.8).0 (.).098 (.) Dia. Smooth with (8.0) Dia. (.).098 (.) Dia.8 (0.8).0 (.) Dia. (0.).0 (.).0 /-0 Thd (7.).80 (7.).80 (0.).00 (0.9).0 (0.).00 For or S Bushing with Locking Ring S Panel Cutouts (.) Dia. (.) Dia.087 (8.0) Dia. (8.0) Dia..0 (8.9mm) Threaded with Maximum Panel Thickness with Standard Hardware:.0 (.mm) (.). (0.8).0 LOCKING LEVER & BUSHING on-none-on positions lock No Code on-none-(on) position locks Cap for Locking Lever Supplied with Cap T7 Material & Finish: Brass with Nickel Plating (.).098 (.).098 Locking Mechanism on-off-(on) on-on-(on) positions lock (0.9) Lever Material & Finish: (0.).00.0 Brass with Chrome Plating 军用钮子开关价格查询全国统一热线 /-0 Thd (8.9).0 (8.9).0 (0.).00 (0.9).0 (0.).00 Standard Hardware: Hex Nuts (TH) Lockwasher (T09) Locking Ring (T07H) For dimensions, see ccessories & Hardware section. on-off-on on-on-on positions lock Color Codes for Optional nodized luminum Caps G Black C (on)-off-(on) (on)-on-(on) position locks Red Blue tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

59 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Bracket PC Mount Miniature CTCT MTERILS & RTINGS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers W G Silver over Silver Power V C 0V C Gold over Brass or Copper Logic Level 0.V 8V C/DC maximum Gold over Silver Note: See Supplement section to find complete explanation of operating range. Power Level or Logic V C or 0.V 8V C/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range..0 (.mm) Terminal with. (.8mm) Bracket B Material: Polyethylene Straight PC Mount with Bracket T for S Bat Toggle Cap Colors vailable: TERMINLS 7. (0.8mm) Terminal with.0 (.0mm) Bracket PCB footprints are on the following Typical Switch Dimension page. (.0) Dia.97 (.). Black OPTIL CPS & CP COLORS B.9 (.mm) Terminal with.0 (9.mm) Bracket White C Red.0 (.mm) Terminal with. (.8mm) Bracket C Material: Polyethylene E T Conical Cap for S Bat Toggle Yellow 军用钮子开关价格查询全国统一热线 (.0).7 Straight PC Mount with Reinforced Bracket. (0.8mm) Terminal with.0 (.0mm) Bracket F (.8) Dia.89 Green (.). G.70 (9.0mm) Terminal with.9 (.mm) Bracket Blue (.). tuizer@.com

60 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Bracket PC Mount Miniature IP8 防水钮子开关厂家 NKK Series M TYPICL SWITCH DIMENSIS Straight PC Bracket BRCKET LENGTH (.8).89 (.7) Typ.0 (.7).0 (.). (.) Typ.0 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 BRCKET LENGTH (.8).89 (.7) Typ.0 (.7).0 (.8) Typ. (9.) Typ.7 (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 (8.0). (.).0 (9.).8 (.).77 (.).77 Single Pole Single Pole BRCKET LENGTH (.8).89 (.7) Typ.0 (.). (.) Typ.0 (.) Typ.09 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 BRCKET LENGTH (.8).89 (.7) Typ.0 (.) Typ.09 (.8) Typ. (9.) Typ.7 (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 (.8).89 (.7).00 (.8).89 (.).0 (.7).00 C L C L (.).77 (.7) Typ.0 (.).77 (.7) Typ.0 Double Pole Double Pole (.8).70 (7.).80 (0.9).0 TERMINL LENGTH (0.) Typ.00 (0.8) Typ.0 (.8).70 (7.).80 (0.9).0 TERMINL LENGTH (0.) Typ.00 (0.8) Typ.0 (.8). Terminal Code: Terminal Length: M0SG Bracket Length:.0 (.mm). (.8mm). (0.8mm).0 (.0mm) 7.9 (.mm).0 (9.mm) (9.0).70 Terminal Code: (.7) Typ.8 (.7) Typ.8 军用钮子开关价格查询全国统一热线 Straight PC Reinforced Bracket Terminal Length: M0SG Bracket Length:.0 (.mm). (.8mm). (0.8mm).0 (.0mm).70 (9.0mm).9 (.mm) tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

61 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK ngle PC Mount Miniature TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers M0 Poles SPDT DPDT SPT PDT PDT * DPT * -pole available on vertical models only. Circuits NE NE () 8 () () 9 () * * () () * 7 () ( ) = Momentary * - circuits available with double and four pole bases only IMPORTNT: S G 0 Switches are supplied without UL, culus & CS marking unless specified. UL, culus & CS recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. Small S. (0.mm) Bat S.00 (.08mm) Bat S. (.mm) Bat E.0 (.mm) Flatted E. (.mm) Flatted Toggle dimensions are based on use with a.0 (8.9mm) bushing; add.070 (.78mm) to toggle length when combining with a.80 (7.mm) bushing. L Locking Lever.0 (.mm) Dia. Locking Lever S S Standard Toggle, Bushing, & Terminal Combinations: L SG0, SG0, SSG0, SSG0, LLG0, & LLG0 Small Bushings.80 (7.mm) Smooth with.0 (8.9mm) Smooth with.80 (7.mm) Threaded with.0 (8.9mm) Threaded with Bushing For Locking Levers Smooth with for Lever Lock 军用钮子开关价格查询全国统一热线 Contact Materials & Ratings Silver; Rated V C 0V C Gold; Rated G 0.V 8V C/DC max Gold over Silver; V C & 0.V 8V C/DC max 0 0 Terminals.0 (.8mm) Right ngle PC (- Pole) Right ngle PCB ( Pole & 0.V Rating Only).0 (.8mm) Vertical PC (- Pole).00 (.mm) Vertical PC (- Pole).80 (7.mm) Smooth Bushing with.00 (.08mm) Bat Toggle B C No Code C G DESCRIPTI FOR TYPICL ORDERING EXMPLE M0SG0 Optional Caps For S Bat Toggle Conical Cap for S Bat Toggle Cap for Locking Lever Nickel Plated Supplied with Switch Black Red Blue Gold Contacts with 0.V Rating Vertical PC Terminals with.0 (.8mm) Terminal Spacing SPDT -NE- Circuit B C E F G Cap Colors Black White Red Yellow Green Blue tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

62 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK ngle PC Mount Miniature Toggle Position ( ) = Momentary POLES & CIRCUITS Connected Terminals Throw & Schematics Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Pole SP DP P P Model M0 * M0 M0 * M08 M09 The SPT model utilizes a double pole base. External connection must be made during field installation. Down Center Up Down Center Up () NE NE External Conn () () () M0 NE * M0 M0 NE () * M08 () () M09 () M0 NE M0 M0 NE () M08 () () M09 () M0 NE M0 M0 NE () M08 () () M09 () (out) (out) (out) - OPEN - SPDT - - OPEN - - DPDT External Connection (in) Common (in) OPEN OPEN For Throw (-On) Connected Terminals & Schematics PDT PDT External Connection (in) The DPT model utilizes a four pole base. External connection must be made during field installation. Note: Terminal numbers are not actually on the switch. * Reverse circuits available for vertical mount SP & DP upon request. External Conn Common (in) (out) 0 (out) (COM) (COM) (COM) 8 9 (out) 7 (out) 9 8 (COM) Pole Model Down Center Up Down Center Up SP DP M0 M0 M07 M0 M0 M07 () () () () () () (out) (out) (out) (out) (out) (out) (out) (out) (out) External External Connection Connection (in) 8 (in) (out) (out) (out) 7 (out) 9 0 (out) (out) External External Connection Connection (in) 8 (in) (out) (out) (out) 7 (out) 9 0 (out) (out) 7 External Connection (in) (out) (out) (out) 7 (out) 9 0 (out) (out) (out) External External Connection Connection (in) 8 (in) 军用钮子开关价格查询全国统一热线 Common (in) (out) tuizer@.com 0

63 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 ngle PC Mount Miniature SMLL TOGGLES IP8 防水钮子开关厂家 NKK Series M Important: Toggle length changes based on bushing selected. ll illustrations are shown with.0 (8.9mm) long bushing. When using a.80 (7.mm) long bushing, toggle length increases.070 (.78mm). S. (.mm) Bat.80 (7.mm) Smooth with (.).098 (8.0) Dia. For, S, or S Bushing with (0.8).0 (.) Dia. (0.).0 (.).0 (.) Dia. (0.9).0 (7.).80 When using this bushing, toggle length is increased by.070 (.78mm)..80 (7.mm) Threaded with (.).098 (.7) Dia.0 (.). (8.0) Dia. (0.8).0 /-0 Thd (0.9).0 (7.).80 When using this bushing, toggle length is increased by.070 (.78mm). Maximum Panel Thickness with Standard Hardware:.0 (0.8mm) S E. (0.mm) Bat.00 (.8) Dia.0 (0.)..0 (.mm) Flatted (.).00 (.).0 Standard Material & Finish: Brass with Bright Chrome Contact factory for optional finishes. SMLL BUSHINGS For or S Bushing with Locking Ring S S Panel Cutouts (.) Dia. (.) Dia.087 (.). E.0 (8.9mm) Smooth with (.).098 (0.8).0 (8.0) Dia.. (.mm) Flatted (.)..0 (8.9mm) Threaded with (.).098 (8.0) Dia. 军用钮子开关价格查询全国统一热线 (0.8).0 S.00 (.08mm) Bat (.7) Dia.0.00 (.).098 (.). (.) Dia. (0.9).0 (8.9).0 /-0 Thd (0.9).0 (8.9).0 Maximum Panel Thickness with Standard Hardware:.0 (.mm) Standard Hardware: Hex Nuts (TH) Lockwasher (T09) Locking Ring (T07H) For dimensions, see ccessories & Hardware section. tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

64 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK ngle PC Mount Miniature LOCKING LEVER & BUSHING Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers LL 0 (8.0) Dia. (.) Dia.0 (.) (8.0).0. (.0).9 (9.) (7.0)..7 W G Smooth with (0.8).0 (.).098 (.) Dia.8 (.) Dia. (0.9).0.0 (.8mm) Right ngle PC (- Pole) (.7) Typ.8 (.7).00 (.8) Dia Typ.07 (.) Typ.00 on-none-on positions lock (.7) Typ.8 (.8).0 (.7).00 (.) Typ.00 (.8) Dia Typ.07 on-none-(on) position locks TERMINLS Single Pole Double Pole Three Pole Locking Mechanism on-off-(on) on-on-(on) positions lock CTCT MTERILS & RTINGS on-off-on on-on-on positions lock Silver over Silver Power V C 0V C Terminal dimensions are shown on the Typical Switch Dimensions pages which follow (.7) Typ.8 (.8) Typ.0 (.). (.) Typ.00 (.8) Dia Typ.07 (on)-off-(on) (on)-on-(on) position locks Gold over Brass or Copper Logic Level 0.V 8V C/DC maximum Gold over Silver No Code Note: See Supplement section to find complete explanation of operating range. Power Level or Logic Level Cap for Locking Lever Supplied with Cap T7 Material & Finish: Brass with Nickel Plating Lever Material & Finish: Brass with Chrome V C or 0.V 8V C/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. 军用钮子开关价格查询全国统一热线 Color Codes for Optional nodized luminum Caps G Black Blue C Right ngle PCB with Reverse Circuit ( Pole & 0.V Rating Only) Red (.9) Typ. (9.7). (.) Typ.00 (.8) Dia Typ.07 tuizer@.com

65 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 ngle PC Mount Miniature TERMINLS (Continued) IP8 防水钮子开关厂家 NKK Series M 0.0 (.8mm) Vertical PC (- Pole) (.8) Typ.0 (.) Typ.09 (.8) Typ (.8) Typ.89 (.8) Typ (.8) Typ.89 (.8) Typ.0 Rockers B Material: Polyethylene.00 (.mm) Vertical PC (- Pole) T for S Bat Toggle (.0) Dia.97 (.). TH for Inch TM for Metric Hex Nut ( per switch) Brass/Nickel (9.0). /-0 Thd or M P0.7 (8.0). (.).09 (.) Typ.00 (.) Typ.00 (.0).7 (.7).00 (.) Typ.00 (.8) Dia Typ.07 Single Pole Double Pole Three Pole Four Pole (.7).00 (.8) Dia Typ.07 Single Pole Double Pole Three Pole Four Pole Terminal dimensions are shown on the Typical Switch Dimensions pages which follow. OPTIL CPS & CP COLORS C Material: Polyethylene (.) Typ.00 (.) Typ.00 T Conical Cap for S Bat Toggle (.8) Dia.89 (.) Typ.00 (.8) Dia Typ.07 (.8).89 (.). (.7).00 (.7).00 (.8) Dia Typ.07 (.). STNDRD HRDWRE T07H for Inch T07M for Metric Locking Ring ( per switch) Steel with Zinc/Chromate (.0).079 (.).7 (.0) Dia. (.0) Dia.7 (.) Typ.00 (.) Typ.00 军用钮子开关价格查询全国统一热线 (.7).07 (0.8).0 (.). (.) Typ.00 (.8) Dia Typ.07 (.8) Typ (.). (.8) Dia Typ.07 B C Colors vailable Black White Red (.) Typ.00 (.) Typ.00 (.) Typ.00 (.8) Dia Typ E F G (.). (.8) Typ.89 0 (.). (.8) Dia Typ.07 Yellow Green Blue T09 Lockwasher ( per switch, none with splashproof) Steel with Zinc/Chromate (.) Dia. (0.) Dia.0 (0.).00 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

66 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK ngle PC Mount Miniature TYPICL SWITCH DIMENSIS.0 (.8mm) Right ngle PC Single Pole Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers M0SG0.0 (.8mm) Right ngle PC Double Pole M0SG0.0 (.8mm) Right ngle PC Three Pole M0SG0 Right ngle PCB M0SG (.9). (.) Typ.0.00 (.9). (.) Typ.0.00 (.9). (.) Typ.0.00 (7.9). (.) Typ.0.00 (.) Dia. (.8).70 (.) Dia. (.8).70 (.) Dia. (.8).70 (7.).88 (7.).88 Single Pole Reverse Circuit (.7) Dia.0 (8.0). (0.9).0 (0.).0 (.09).0 (.7).00 (0.).0 (.09).0 (.7).00 (0.).0 (.8).07 (.). (0.9).0 (.). (.) Dia. (0.).0 (9.). 军用钮子开关价格查询全国统一热线 (.8).70 (8.9).0 (.7).00 (.7) Typ.00 (.8).0 (.7) Typ.00 (.8) Typ.0 (.).79 (0.8).0 (.7).0 (.0). (.0) (.0). (.0). (7.9). (.).9 (0.8) Typ.0 (.7) Typ.8 (.7).00 (.).9 (0.8) Typ.0 (.7) Typ.8 (7.).89 (.).9 (0.8) Typ.0 (.7) Typ.8 (8.). (.) Typ.0 (.9) Typ. tuizer@.com

67 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 ngle PC Mount Miniature IP8 防水钮子开关厂家 NKK Series M TYPICL SWITCH DIMENSIS Single Pole.0 (.8mm) Vertical PC (.) Dia. Rockers (.) Typ.0.00 (.) Typ.0.00 (.) Typ.0.00 (.) Typ.0.00 (.7) Dia.0 (.7) Dia.0 (.7) Dia.0 (.7) Dia.0 (.8).70 (.) Dia. (.8).70 (.) Dia. (.8).70 (.) Dia. (.8).70 (7.).88 (7.).88 (8.0). (8.0). (0.).0 (.).0 (.7).00 (0.).0 (.).0 (.7).00 (0.9).0 (0.).0 (.8).07 (.). (0.9).0 (0.).0 (.8).07 (.). (0.8) Typ.0 (.8) Typ.0 Double Pole (0.8) Typ.0 (.8) Typ.0 Three Pole (0.8) Typ.0 (.8) Typ.0 Four Pole (0.8) Typ.0 (.8) Typ.0 (.7).0 (.7) (.8).89 (.7).00 (.0). (.7) Typ.00 (.0). (.7) Typ.00 (.8) Typ.89 (7.).89 (.8) Typ.89 (.).878 军用钮子开关价格查询全国统一热线 (.7).0 0 (7.9) (.0). (.7).0 (.7).00 M0SG0.0 (.8mm) Vertical PC M0SG0.0 (.8mm) Vertical PC M0SG0.0 (.8mm) Vertical PC (.0). (.7) Typ.00 M0SG0 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

68 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK ngle PC Mount Miniature TYPICL SWITCH DIMENSIS.00 (.mm) Vertical PC Single Pole Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers M0SG.00 (.mm) Vertical PC Double Pole M0SG.00 (.mm) Vertical PC Three Pole M0SG.00 (.mm) Vertical PC Four Pole M0SG (.) Typ.0.00 (.) Typ.0.00 (.) Typ.0.00 (.) Typ.0.00 (.7) Dia.0 (.7) Dia.0 (.7) Dia.0 (.7) Dia.0 (.) Dia. (.8).70 (.) Dia. (.8).70 (.) Dia. (.8).70 (.) Dia. (7.).88 (7.).88 (8.0). (0.).0 (.).0 (.7).00 (0.).0 (.).0 (.7).00 (0.9).0 (0.).0 (.8).07 (.). (0.9).0 (0.).0 (.8).07 (.). 军用钮子开关价格查询全国统一热线 (.8).70 (8.0). (0.8) Typ.0 (.) Typ.00 (0.8) Typ.0 (.) Typ.00 (0.8) Typ.0 (.) Typ.00 (0.8) Typ.0 (.) Typ.00 (.7).0 (.7).0 (.7) (7.9). (.8).89 (.7).00 (.0). (.7) Typ.00 (.0). (.7) Typ.00 (.8) Typ.89 (7.) (.8) Typ.89 (.).878 (.0). (.7).0 (.7).00 (.0). (.7) Typ.00 tuizer@.com

69 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M00 IP8 防水钮子开关厂家 NKK LED Tipped Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Power Level V C 0V C 0V DC Logic Level (gold): 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum for silver; 0 milliohms maximum for gold Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V C minimum between contacts for minute minimum;,00v C minimum between contacts & case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum Nominal Operating Force: On-to-On Position Off-to-On Position Single Pole.9N.9N Double Pole.N 7.0N ngle of Throw: 0 Materials & Finishes Bushing: Housing: Mounting Bracket: Movable Contacts: Stationary Contacts: Lamp Contacts: Base: Switch Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Mounting Torque: Soldering Time & Temp: Cleaning: Brass with nickel plating Stainless steel Steel with tin plating Silver alloy or silver alloy with gold plating Silver with silver plating or copper or brass with gold plating Phosphor bronze Diallyl phthalate (UL9V-0) Copper with silver or gold plating Brass with silver or gold plating 0 C through + C (+ F through + F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction).7nm ( lb in) for double nut;.7nm ( lb in) for single nut Wave Soldering (PC version): See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Note: Lever must be in center position while soldering. PC mountable device is not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL9V-0 base UL: File No. E - Recognized only when ordered with marking on switch. dd /U to end of part number to order UL recognized switch. Single pole with synchronous circuits & single color LEDs & solder lug or PC recognized V C CS: File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C to end of part number to order CS certified switch. ll single pole with synchronous circuits & single color LEDs certified V C 军用钮子开关价格查询全国统一热线 tuizer@.com

70 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 LED Tipped IP8 防水钮子开关厂家 NKK Series M00 Distinctive Characteristics Industry s first LED illumination at tip of toggle switches. Single color LEDs of red, yellow, and green, plus bicolor red/green, to meet varied design requirements. LEDs can operate independently from or synchronously with switching operation. ntijamming feature to protect contacts from damage due to excessive downward force on the toggle. High torque bushing prevents the bushing from rotating or separating from the metal frame during installation. Stainless steel frame resists corrosion. Silver contacts are of specially composed alloy for hardness. High insulating barriers protect against crossover in double pole devices. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants.,00v dielectric strength between switch contacts and case is accomplished by clinching the frame away from the terminals. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

71 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M00 IP8 防水钮子开关厂家 NKK LED Tipped TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers M Poles SPDT * DPDT * vailable only with Terminals 0, 0, 0 Circuits NE IMPORTNT: T Switches are supplied without UL & CS marking unless specified. UL & CS recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. LED Circuits & ctuator Types L Isolated T Synchronous SPDT -NE- Switch Circuit LED Colors Single Color C Red E Yellow F Green Bicolor CF Red/Green W G Contact Materials & Ratings Silver; V C Gold; Rated 0.V 8V C/DC max DESCRIPTI FOR TYPICL ORDERING EXMPLE Silver Contacts with -mp Rating MTCW0 C W 0 Red LED Terminals & Mounting Types 0 Solder Lug with Threaded Bushing* 0 Quick Connect with Threaded Bushing 0 Straight PC with Threaded Bushing 0 Right ngle PC with Smooth Bushing (available with gold contacts only) Synchronous LED Circuit in ctuator / 0 Threaded Bushing Solder Lug Terminals 军用钮子开关价格查询全国统一热线 Threaded Bushings No Code /M *Wire harness & cable assemblies offered only in mericas / 0 Thread (Inch) mm Thread (Metric) tuizer@.com

72 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 LED Tipped IP8 防水钮子开关厂家 NKK Series M00 POLES & CIRCUITS & LED ILLUMINTI Toggle Position & Terminal Numbers Schematics Model Pole & Throw Down Center Up Notes: Terminal numbers are not actually on the switch. LEDs require an external power source. Rockers M SPDT Connected Power Terminals - Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals - - Red - M SPDT Connected Power Terminals - LED Circuit LED Circuit Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals - - Red - M DPDT Connected Power Terminals - - Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals Red 8-9 M DPDT Connected Power Terminals - - LED Circuit LED Circuit Isolated LEDs (see schematics) Connected LED Terminals Synchronous Single Color LED Connected LED Terminals Synchronous Bicolor LED Connected LED Terminals Red 8-9 NE NE NE NE NE NE NE NE OPEN - OPEN OPEN NE NE NE NE NE NE NE NE OPEN 7-9 OPEN OPEN - - OPEN Green Green OPEN Green Green 8-7 Isolated Single Color LED Isolated Bicolor LED Synchronous Single Color LED Synchronous Bicolor LED Isolated Single Color LED Isolated Bicolor LED Synchronous Single Color LED Synchronous Bicolor LED LED COLORS & SPECIFICTIS (COM) (COM) Red Green (+) Red COM ( ) Green (COM) L(+) L(-) (COM) Red Green COM (+) External Connection L(+) L(-) 7 9 (COM) (COM) (+) Red 7 COM 9 ( ) Green L(+) L(-) 7 9 (COM) (COM) L(+) L(-) Red Green 9 8 COM (+) 7 External Connection The electrical specifications shown are determined at a basic temperature of C. LED circuit is isolated and requires an external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in Supplement Section. The LED is an integral part of the switch Single Color Bicolor and not available separately. Bicolor LED is translucent white when unlit. C E F CF Color Red Yellow Green Red/Green Units Forward Peak Current I FM 0 0 m Typical Forward Current I F m Forward Voltage V F....7/.0 V Reverse Peak Voltage V RM V Current Reduction Rate bove C I F /0. m/ C mbient Temperature Range 0 ~ + C 军用钮子开关价格查询全国统一热线 tuizer@.com Red Green Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

73 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M00 IP8 防水钮子开关厂家 NKK LED Tipped LED CIRCUIT, TOGGLE, & MOUNTING TYPE COMBINTIS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers L T Solder Lug Toggle with Isolated LED Circuit Toggle with Synchronous LED Circuit Finish: Brushed aluminum Standard Hardware: TH Hex Nuts, T07H Locking Ring, T09 Lockwasher Standard & optional hardware details in ccessories & Hardware section. Threaded Bushing combines with Terminal codes 0, 0, & 0. Single Pole Smooth Bushing combines with Terminal code 0. TYPICL SWITCH DIMENSIS MTCFW0 Single color LED switch does not have terminal. Solder Lug Right ngle PC (.) Dia.098 (.0) Dia.97 (.) Dia.098 (.0) Dia.97 (.).0 (.7).00 (7.).89 Double Pole MTCFW0 Single color LED switch does not have terminal 8. (.9). (.).0 (.).0 (.0). (.0) Dia.97 /-0 Thd (.) Dia (.7).79 Single Pole Only (.0) Dia.97 (.7).79 /-0 Thd Max. Panel Thickness with Standard Hardware.0 (.mm) (.) Dia. (.) Dia.087 Max. Panel Thickness without Locking Ring. (.mm) MTCFG0 Single color LED switch does not have terminal. Gold contact material only (.0) Dia.97 (8.0). (8.0). (.7).79 (.) Dia. (0.9).0 /-0 Thd (0.9).0 (7.).99 (0.).799 (0.).799 (.) Dia. (.8).89 (.).0 (.8).89 (.).0 (0.).0 (.).0 (.). 军用钮子开关价格查询全国统一热线 (.7).79 0 (.7).79 0 (0.8) Typ.0 (.7) Typ.8 (0.8) Typ.0 (.7) Typ.8 (.7) Typ.00 (.8).0 (.). (.7) Typ.0 (.7) Typ.0 (.) Dia. (.8) (0.).0 (.0). (.0) Typ.079 (.).0 (.0). (.0) Typ.079 (.8) Typ.89 (.7).00 (.).9 (0.8) Typ.0 (.7) Typ.8 tuizer@.com

74 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 LED Tipped IP8 防水钮子开关厂家 NKK Series M00 CTCT MTERILS & RTINGS W G Silver over Silver Power V C 0V C Gold over Brass or Copper Logic Level 0.V 8V C/DC maximum Solder Lug with Turret LED Terminal Straight PC with Turret LED Terminal (.).0 (.8).89 (.8).89 Thk = (0.8) Typ.0 Right ngle PC Epoxy Seal (.7) Typ.0 Epoxy Seal TH Hexagon Nuts ( per switch) Material: Brass with nickel plating (9.0). /-0 Thd (8.0). (.).09 Complete explanation of operating range in Supplement section. (.).0 (.8).89 (.7).0 (.8).89 Thk = (0.8) Typ.0 Single Pole (.8).89 (.7) Typ.8 (.8) Dia Typ.07 (.0).079 (.).0 (.0).079 (.0).7 TERMINLS Quick Connect Double Pole Optional Hardware: Knurled nuts, dress nuts, and - plates are available; see details in ccessories & Hardware section. 0 Single color LED & isolated bicolor LED switches do not have terminal. STNDRD MOUNTING HRDWRE T07H Locking Ring ( per switch) Material: Steel with chromate over zinc (.0).079 (.7).07 Single Pole (.) or.9 (.7) Typ.8 (.8).0 (.). (.8) Dia Typ.07 (.) Typ.00 (.) Dia.0 (.0) Dia.7 军用钮子开关价格查询全国统一热线 (0.8).0 7 (.).0 (.8).89 (.8) Typ.89 9 (.7) Typ 8.8 (.8) Dia Typ.07 Single color LED & isolated bicolor LED switches do not have terminal. (.8).89 Thk = (0.8) Typ.0 Epoxy Seal (.7) Typ.0 Single color LED & isolated bicolor LED switches do not have terminal 8. T09 Lockwasher ( per switch) Material: Steel with chromate over zinc (.) Dia. (0.).00 (0.) Dia.0 tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

75 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Process Sealed Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Power Level V C 0V 0V DC (On-On circuit) 0V DC (all other circuits) Logic Level (gold): 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Logic/Power Level: Combines silver & gold ratings (gold over silver) Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum for silver; 0 milliohms maximum for gold Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V C minimum between contacts for minute minimum;,00v C minimum between contacts & case for minute minimum Mechanical Life: 00,000 operations minimum Electrical Life:,000 operations minimum for silver; 0,000 operations minimum for gold Contact Timing: Nonshorting (break-before-make) ngle of Throw: Materials & Finishes Toggle/Lever: Support Bracket: Bushing/Housing: Sealing Ring: Base: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: PCB Processing Soldering: Cleaning: Brass with nickel plating Brass with tin plating Glass fiber reinforced polyamide (UL9V-0) Nitrile butadiene rubber Glass fiber reinforced polyamide (UL9V-0) Silver alloy with silver plating (code W); copper or phosphor bronze with gold plating (code G); or silver alloy with gold plating (code ) Silver alloy with silver plating (code W); copper or brass with gold plating (code G); or silver alloy with gold plating (code ) Copper or brass with silver or gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering Recommended: See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. utomated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications Flammability Standards: UL9V-0 rated bushing/housing & base UL: File No. E - Recognized only when ordered with marking on switch. dd /U or /CUL before first dash in part number to order UL recognized switch. ll models recognized V 0V C, 0V DC or 8V DC. CS: File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C to end of part number to order CS certified switch. ll models certified V 0V C, 0V DC. 军用钮子开关价格查询全国统一热线 tuizer@.com

76 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Miniature IP8 防水钮子开关厂家 NKK Series M Distinctive Characteristics ntijamming actuator design protects against mechanism damage from downward force on the toggle. Single unit construction of the bushing and top of the housing gives protection from cleaning fluids orother liquids. O-ring surrounding actuator at top of bushing interior prevents liquids from reaching switch mechanism. Ultrasonic welding of upper and lower housing seals out contaminants and allows automated soldering and cleaning. Terminals are epoxy sealed to prevent entry of flux, solvents, and other contaminants. Bracketed models have crimped legs to ensure secure PC mounting and prevent dislodging during automated soldering. Logic level and power capabilities are available to suit varying applications. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

77 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Process Sealed Miniature TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers MT Poles SPDT DPDT Circuits NE NE () 8 () () 9 () ( ) = Momentary S S S ctuators.00 (.7mm) Bat Lever.00 (7.mm) Bat Lever.0 (.mm) Bushing with Double Flat Contact Materials & Ratings Silver; Rated V C 0V C Gold; Rated G 0.V 8V C/DC max Gold over Silver; V C & 0.V 8V C/DC max DESCRIPTI FOR TYPICL ORDERING EXMPLE.00 (.7mm) Bat Lever Gold Contacts with 0.V Rating Bushing.0 (.mm) Double Flatted MTSG0 G SPDT -NE- Circuit Straight PC Terminals 军用钮子开关价格查询全国统一热线 PC Terminals 0 Straight Straight with.0 (.7mm) Bracket 0.0 (.8mm) Right ngle 0.0 (.8mm) Vertical 0.90 (9.9mm) Extended PC 0.78 (8.mm) Extended PC 07.9 (.0mm) Extended PC IMPORTNT: Switches are supplied without UL, culus & CS marking unless specified. UL, culus & CS recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. tuizer@.com

78 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Miniature IP8 防水钮子开关厂家 NKK Series M POLES & CIRCUITS Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Down Center Up Down Center Up Note: Terminal numbers are not actually on the switch. Rockers SP DP S W MT MT MT MT8 MT9 MT MT MT MT8 MT9 Material: Nickel over Brass () () NE NE NE NE () () () () () () Standard Combinations: S Bat Lever with straight terminals (code 0) with silver or gold contacts. G.00 (.7mm) Bat Lever - OPEN - SPDT - - OPEN - - DPDT CTUTORS Silver over Silver Power V C 0V C Gold over Brass or Copper Logic Level 0.V 8V C/DC maximum Complete explanation of operating range in Supplement section. Gold over Silver (.8) Dia.0 (.7).00.0 (.mm) Double Flatted Material: Nickel over Brass CTCT MTERILS & RTINGS Power Level or Logic Level Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. 军用钮子开关价格查询全国统一热线 tuizer@.com S BUSHING (.8).8.00 (7.mm) Bat Lever (.7) Dia.0 (7.).00 (COM) (COM) Standard Combinations: S Bat Lever with bracketed terminals (codes, 0, 0) with silver or gold contacts. (.).0 (.). V C or 0.V 8V C/DC maximum Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

79 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Process Sealed Miniature PC TERMINLS Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Straight Straight with.0 (.7mm) Bracket.0 (.8mm) Right ngle.0 (.8mm) Vertical.90 (9.9mm) Extended PC.78 (8.mm) Extended PC.9 (.0mm) Extended PC (.8).0 Epoxy Seal (.8).89 (.7).0 Thk = (0.8).0 (.9). (.7).0 Epoxy Seal (.9). (.8).0 Thk = (0.8).0 (.7).00 (.7) Typ.8 (.7).00 (.8) Dia Typ.07 (.) Typ.00 (.7) Typ.8 (.8) Dia Typ.07 Single Pole (.) Typ.0 (.8) Typ.0 (.7).00 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 Single Pole Single Pole (.) Typ.00 (.8) Dia Typ.07 Single Pole (.7) Typ.8 (.8) Dia Typ.07 Single Pole (.8).89 (.7) Typ.8 (.8) Dia Typ.07 Double Pole (.7) Typ.8 (.8).0 (.7).00 (.) Typ.00 (.8) Dia Typ.07 (.8).89 C L (.) Typ.0 (.) Typ.09 (7.9) Typ. (.7) Typ.8 (.8) Dia Typ.07 (.) Dia Typ.09 Double Pole Double Pole (.) Typ.09 (.8) Typ.0 (.) Typ.00 (.8) Dia Typ.07 Double Pole (.7) Typ.8 (.8) Dia Typ.07 Double Pole Dimension = terminal lengths as shown beside the terminal codes at the left. 军用钮子开关价格查询全国统一热线 (.7).00 tuizer@.com

80 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Process Sealed Miniature IP8 防水钮子开关厂家 NKK Series M TYPICL SWITCH DIMENSIS Single Pole Straight PC Rockers NKK P/N This Side (.). (.). (.).0 (.).0 (7.).00 (.8).8 NKK P/N This Side (.7) Dia.0 (0.) Typ.00 (0.8) Typ.0 (.7) Typ.8 (.7).0 (.8) Dia.0 (.8) Dia.0 (.). (.8).89 ctuator in Down Position (.7).00 (.).0 (9.).70 (.).80 (.8).89 ctuator in Down Position (.7).00 (.).0 Double Pole (9.).70 (.).80 NKK P/N This Side (.8).89 ctuator in Down Position (.7) Typ.8 (0.8) Typ.0 (.7) Typ.8 (0.8) Typ.0 Single & Double Pole (.7) Typ.0 (.7) Typ.0 (8.0). (.). (.).0 (.). (.7) Typ.0 (.7) Typ.8 (.8).89 (.) Typ. 军用钮子开关价格查询全国统一热线 (.7).00 (.7).0 (.8).89 (.7).00 (.7) Typ.0 MTSG0 Straight PC MTSG0 Straight PC Bracket MTSG tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

81 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series M IP8 防水钮子开关厂家 NKK Process Sealed Miniature Right ngle PC TYPICL SWITCH DIMENSIS Single Pole Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers MTSG0 Right ngle PC MTSG0 Vertical PC MTSG0 Vertical PC MTSG0 NKK P/N This Side (.).0 (.) Typ.0.00 NKK P/N This Side (.).0 (.) Typ.0.00 (.). (.) Typ.0.00 (.). (.) Typ.0.00 (.). (.). (7.).8 (7.).8 (.7) Dia.0 (7.).00 Double Pole (.7) Dia.0 Single Pole (.7) Dia.0 Double Pole (.7) Dia.0 (.). (0.).0 (.7).00 (.7).00 ctuator in Down Position (7.).00 ctuator in Down Position (7.).00 (.). (0.).0 (.7).00 NKK P/N This Side ctuator in Down Position (7.).00 (.). (.). (0.).0 (.7).00 (0.).0 (.7).00 ctuator in Down Position HNDLING PRECUTI NKK P/N This Side (0.).00 (.7) Typ.00 (.8).0 (.0).09 (0.).00 (0.8) Typ.0 (.8) Typ.0 (.0).09 (0.).00 (0.8) Typ.0 (.8) Typ.0 (.7) Typ.8 (.7) Typ.8 (.7).00 (.7).00 (.).0 (.8).89 (.). (.7).00 (.).0 (.). (0.8) Typ.0 (.). (.7). (0.8) Typ.0 (.7).00 (.). (.7).00 (.). (.7) Typ.00 When an application employs MT model with silver contacts, V C, and the switch will be actuated 00 or more times per day, note these instructions: Peel off the film seal on the switch body situated over the part number after cleaning. 军用钮子开关价格查询全国统一热线 tuizer@.com

82 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series P IP8 防水钮子开关厂家 NKK Internationally pproved Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity Resistive Load: Motor Load: Lamp Load: V C 0V C V V C for On-Off-On circuit V C for other circuits Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V C minimum between contacts for minute minimum;,000v C minimum between contacts & case for minute minimum Mechanical Life: 00,000 operations minimum Electrical Life:,000 operations minimum ngle of Throw: Materials & Finishes Toggle Cap: Lever: Bushing: Frame: Case/Base: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Soldering Time & Temp: Cleaning: Brass with nickel plating Brass with chrome plating Brass with nickel plating Stainless steel Diallyl phthalate resin (UL9V-0) Silver alloy with silver plating Pure silver with silver plating Copper with silver plating 0 C through +8 C (+ F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Wave Soldering Recommended (Straight PC): See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL9V-0 rated case/base UL: File No. E - Recognized only when ordered with marking on switch. dd /U or /CUL to end of part number to order UL recognized switch. ll models recognized at V C 0V C. CS: File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C to end of part number to order CS certified switch. ll models certified at V C 0V C. VDE: License No. 97 ll models approved at V C 0V C. Marking on switch is standard. ll models meet EN 08- standard. 军用钮子开关价格查询全国统一热线 tuizer@.com

83 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Internationally pproved IP8 防水钮子开关厂家 NKK Series P Distinctive Characteristics Meets EN 08- standard. Rockers High torque bushing construction prevents rotation or separation from frame during installation. Stainless steel frame resists corrosion and increases environmental safety. Case/base of heat resistant resin meets UL9V-0 flammability standard. Contacts of special silver alloy resist arcing and guarantee stable electrical contact and long life. High insulating barriers increase isolation of circuits in double pole devices and provide added protection to contact points. Prominent external insulating barriers increase insulation resistance and dielectric strength. Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. Clinching of the frame to the case well above the base and terminals provides,000v dielectric strength. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

84 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series P IP8 防水钮子开关厂家 NKK Internationally pproved TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers P0 Poles & Circuits SPST NE SPDT NE SPDT DPST NE DPDT NE DPDT Pole DPDT -NE- Circuit No Code DESCRIPTI FOR TYPICL ORDERING EXMPLE Model P0B.89 (7.mm) Large Bat with mm Bushing Solder Lug Terminals E B D B & Bushings. (.0mm) White Cap with mm Bushing.0 (.mm) Flatted with mm Bushing.89 (7.mm) Large Bat with mm Bushing.78 (9.0mm) White Capped Column with mm Bushing No Code P Z Terminals Solder Lug* Straight PC.87 (.7mm) Quick Connect Toggle Position Connected Terminals Throw & Schematics Down Center Up Down Center Up SP P0 NE -b OPEN OPEN SPST SP P0 P0 NE -b OPEN -a SPDT DP P0 NE -b -b OPEN OPEN DPST DP P0 P0 NE POLES & CIRCUITS -b -b OPEN -a -a DPDT 军用钮子开关价格查询全国统一热线 * Wire harness & cable assemblies offered only in mericas IMPORTNT: VDE is marked on all models. Switches are supplied without UL, culus & CS marking unless specified. UL, culus & CS recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. Note: Terminal numbers are on the switch. a a (COM) b (COM) b (COM) b (COM) a b tuizer@.com b b

85 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Internationally pproved TOGGLES & BUSHINGS IP8 防水钮子开关厂家 NKK Series P No Code Panel Thickness with. (.mm) maximum. (.0mm) White Cap with mm Bushing Epoxy Seal (.8).89 Epoxy Seal (7.).99 (.7).0 Thk = (.0).09 (.).0 E Standard Hardware For mm Bushing: Locking Ring T07M, Internal Tooth Lockwasher T09, Hex Nuts TM For mm Bushing: Hex Face Nut T0M, Locking Ring T0M, Internal Tooth Lockwasher T08, Hex Mounting Nut T7M Optional Splashproof Boot ssemblies (for code B): T0 & T8 boots plus hex nut & o-ring; see ccessories & Hardware section. No Code P Straight PC (.) Dia. (.0). (.) Dia.0 (.0). (0.0).787 (.).0 (0.).0 Solder Lug Panel Thickness with Locking Ring.0 (.mm) maximum (.) Dia. (.0) Dia. (.).00 (.).0 Thk = (.0).09.0 (.mm) Flatted with mm Bushing (.) Dia.0 (.).77 (.).09 b (.0).079 (7.) Typ.00 Panel Cutouts (.). (.) Dia.087 TERMINLS Z.89 (7.mm) Large Bat with mm Bushing B D Panel Thickness with. (.mm) maximum.87 (.7mm) Quick Connect TYPICL SWITCH DIMENSIS P0B, P0B, P0B (.).00 (.) Dia.9 (.). (.).0 (.) Dia.0 (.).0 P0 models do not have terminal a..78 (9.0mm) White Capped Column with mm Bushing Panel Thickness with Locking Ring.7 (.mm) maximum (9.0). (.7).87 Thk = (0.8).0 SPST.00 SPDT.00 DPST.00 DPDT M P0.7 (.0). M P (7.).89 (0.9).0 (8.0). (.8) Dia Typ.07 b a (7.) Typ (.8) Dia Typ.07 (.0) Dia. (7.).89 b (0.).00 (7.) Typ (.8) Dia Typ.07 P0, P0, P0 mm Bushing (.) x (.0) Typ.09 x.079 (.0).7 (.0).8 (.0).97 (.) x (.0) Typ.09 x.079 (.).8 (.0).97 (.0) Typ.09 (0.8).0 (7.).00 (0.).00 (.0) Typ.09 (0.8).0 (7.).00 P0 models do not have terminals a & a. 军用钮子开关价格查询全国统一热线 (0.).00 b a b a (0.).00 b (0.).807 b a (0.).807 (.) Typ.0 (.) Dia.7 (9.0).78 b a b (0.).00 P0 (.) Dia.9 (9.0). (.0) Dia.8 mm Bushing a P0B (7.) Typ.00 (.8) Dia Typ.07 tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

86 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Contents for Standard Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Low Capacity... Page 9 Power Level Solder Lug Terminals Bushing Mount Double Pole Medium Capacity... Page 97 ~0 Power Level Solder Lug, Quick Connect Terminals Bushing Mount Single & Double Pole Medium/High Capacity... Page 0 ~ Power Level Solder Lug, Screw Lug, Quick Connect Terminals Bushing Mount One through Four Pole High Capacity... Page 0~0 Power Level Screw Lug Terminals Bushing Mount or Mounting Screws Double Pole & Three Pole 军用钮子开关价格查询全国统一热线 tuizer@.com

87 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Low Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S GENERL SPECIFICTIS FOR S00s Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following table Rockers Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Operating Temp Range: Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor Plate: Movable & Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Installation Sealing: Mounting Torque: Soldering Time & Temperature: Standards & Certifications CS: 0 milliohms maximum 00 megohms 00V DC,00V C minimum for minute minimum 0,000 operations minimum 0,000 operations minimum 0 C through +70 C (+ F through +8 F) Brass with chrome plating Brass with chrome or nickel plating Phenolic resin Steel with zinc plating Copper with silver plating Silver alloy plus copper with silver plating Copper with silver plating 0 C through +70 C ( F through +8 F) for Splashproof models; 0 C through +70 C (+ F through +8 F) for all other models Splashproof models meet IP7 standard.9nm ( lb in) for double nut Manual Soldering: See Profile in Supplement section. File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C to end of part number to order CS certified switch. Certified V C 0V C. 军用钮子开关价格查询全国统一热线 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

88 R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Low Capacity Standard Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers * CS certified only when ordered with marking on switch (see General Specs) Model Notes: Standard Hardware: T0M Knurled Nut, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies (only for bat lever models): T0 & T8 boots plus hex nut and o-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. S *pprovals Pole & Throw (7.).9 (.0) Dia. DOUBLE POLE WITH SOLDER LUG * Toggle Position/Connected Terminals Down Center Up M P (8.0).709 (0.0).9 (.9).90 (.).7 (.0) Dia Typ.079 S & S (0.) Typ.07 (.0).7 (.) Dia.090 (.8) Typ.0 (9.0). (.0).7 (9.0). C V Electrical Capacity Resistive C 0V SR Black Polyamide Paddle (7.8).09 S does not have terminals & DC 0V (0.8) Typ.0 (0.) Typ.0 Inductive C V PF 0. S DPST - - NE S DPDT - - NE - - SR DPDT - - NE - - Throw & Schematics: DPST (COM) DPDT (COM) 军用钮子开关价格查询全国统一热线 Note: Terminal numbers are actually on the switch (.).00 ngle of Throw (.) Dia.9 (.). Maximum Panel Thickness:.8 (.0mm) tuizer@.com

89 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Medium Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S GENERL SPECIFICTIS FOR S ~ S9 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Rockers Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: ngle of Throw (α): Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Installation Sealing: Mounting Torque: Maximum Panel Thickness: Soldering Time & Temperature: Standards & Certifications UL: CS: 0 milliohms maximum,000 megohms 00V DC,000V C minimum for minute minimum 0,000 operations minimum for SW, S8W, S9W, SW, S8W, S9W 0,000 operations minimum for all other models,000 operations minimum Shown in tables on following pages Brass with chrome plating Brass with chrome plating Phenolic resin Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating 0 C through +70 C ( F through +8 F) for Splashproof models; 0 C through +70 C (+ F through +8 F) for all other models Splashproof & lever lock panel seal models meet IP7 standard.7nm ( lb in) for single nut on W & L models.9nm ( lb in) for double nut on other models Shown beneath panel cutout in switch dimension drawings Manual Soldering: See Profile in Supplement section. File No. E - Recognized only when ordered with marking on switch. dd /U or /CUL to end of part number to order UL recognized switch. UL or culus recognition designated beside part numbers on following pages. See Supplement section to find UL or culus rating details. File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C to end of part number to order CS certified switch. CS certification designated beside part numbers on following pages. See Supplement section to find CS rating details. 军用钮子开关价格查询全国统一热线 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

90 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Medium Capacity Standard Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model Notes: Standard Hardware: T0M Knurled Nut, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. S Notes: Standard Hardware: T0M Knurled Nut, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. * Wire harness & cables assemblies offered only in mericas. S *pprovals Pole & Throw (8.0).709 (8.).7 SINGLE POLE WITH SOLDER LUG * Toggle Position/Connected Terminals (.0) Dia. α (.0) Dia. (7.).89 (7.).89 M P M P (0.0).9 (0.0).9 (.7).9 (.7).0 (.7). (.7). (.) Dia Typ.09 (0.8) Typ.0 (.8) Typ.89 (.) Dia Typ.09 (.8) Typ.89 S does not have terminal S does not have terminals & Electrical Capacity Down Center Up Resistive Inductive C V C 0V (0.8) Typ.0 DC 0V (0.0).8 (.).8 C V PF 0. S SPST - NE 0 8 S SPDT - NE S SPDT Throw & Schematics: C SPST * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model US *pprovals Pole & Throw INTERNL CNECTI SPDT (COM) DOUBLE POLE WITH SOLDER LUG * Toggle Position/Connected Terminals Note: Terminal numbers are actually on the switch Electrical Capacity Down Center Up Resistive Inductive C V C 0V DC 0V (.).00 (.) Dia.9 (.). Maximum Panel Thickness:.8 (.0mm) C V PF 0. S DPST - - NE 8 S DPDT - - NE S7 DPDT Throw & Schematics: C US DPST INTERNL CNECTI DPDT (COM) 军用钮子开关价格查询全国统一热线 Note: Terminal numbers are actually on the switch (.).00 ngle of Throw α = ngle of Throw (.) Dia.9 (.). Maximum Panel Thickness:.8 (.0mm) tuizer@.com

91 R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Medium Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S SINGLE POLE WITH QUICK CNECT Toggle Position/Connected Terminals Electrical Capacity Model Notes: Standard Hardware: T0M Knurled Nut, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. SF does not have terminal Maximum Panel Thickness:.8 (.0mm) Notes: Standard Hardware: T0M Knurled Nut, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. (8.0).709 (8.).7 pprovals Pole & Throw (.0) Dia. α (.0) Dia. (7.).89 (7.).89 M P Down Center Up Resistive Inductive M P (0.0).9 (0.0).9 (9.7).9 (.8). (7.9). (.7). (7.9). (.8). (7.) Typ.9 (.) Typ.0 (.) Dia Typ.00 (.) Dia Typ.00 (7.) Typ.9 (.) Typ.0 Note: SF (.7). SF does not have terminals & C V (0.8) Typ.0 (0.0).8 (.).8 C 0V DC 0V (.).00 (.).00 (.) Dia.9 (.). (.) Dia.9 (.). Maximum Panel Thickness:.8 (.0mm) C V PF 0. SF SPST - NE 0 8 SF SPDT - NE SF SPDT Throw & Schematics: Model pprovals SPST Pole & Throw INTERNL CNECTI SPDT (COM) DOUBLE POLE WITH QUICK CNECT Toggle Position/Connected Terminals Note: Terminal numbers are actually on the switch Electrical Capacity Down Center Up Resistive Inductive C V C 0V DC 0V C V PF 0. SF DPST - - NE 8 SF DPDT - - NE S7F DPDT Throw & Schematics: DPST INTERNL CNECTI DPDT (COM) 军用钮子开关价格查询全国统一热线 SF Note: Terminal numbers are actually on the switch SF ngle of Throw α = ngle of Throw tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

92 R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Medium Capacity Standard Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Notes: Standard Hardware: T0M Face Hex Nut, T08 Lockwasher, T7 O-ring. See ccessories & Hardware section. For.0 Quick Connect terminals, add F to end of part number. See Quick Connect terminal dimensions on previous page. For further information, contact factory. * Wire harness & cable assemblies offered only in mericas. SW SW pprovals (0.9).9 (8.0).709 α (.7) Dia. M P (7.).89 (7.0) Dia.9 Flat (7.).9 (.).9 SW does not have terminal Notes: Standard Hardware: T0M Face Hex Nut, T08 Lockwasher, T7 O-ring. See ccessories & Hardware section. For.0 Quick Connect terminals, add F to end of part number. See Quick Connect terminal dimensions on previous page. For further information, contact factory. * Wire harness & cable assemblies offered only in mericas. (0.9).9 (8.).7 Toggle Position/Connected Terminals ( ) = Momentary α (.7) Dia. M P (7.).89 (7.0) Dia.9 Flat (7.).9 (.).9 (.7).9 (.7).0 (.7). (.) Dia Typ.09 (.7). (0.8) Typ.0 (.8) Typ.89 (.) Dia Typ.09 (.8) Typ.89 Electrical Capacity Down Center Up Resistive α = Pole & C C DC ngle Model Throw V 0V 0V of Throw SW SPST - NE 0 SW SPDT - NE - 0 SW SPDT SW SPDT - NE () S8W SPDT () - () - 0 S9W SPDT - () - 0 SPST SPDT (COM) Throw & Schematics: SINGLE POLE SOLDER LUG WITH PNEL SEL * INTERNL CNECTI Toggle Position/Connected Terminals ( ) = Momentary SW does not have terminals & Note: Terminal numbers are actually on the switch (0.8) Typ.0 (0.0).8 Electrical Capacity (.).8 (.).7 (.) Dia.9 Maximum Panel Thickness:.8 (.0mm) pprovals Down Center Up Resistive α = Pole & C C DC ngle Model Throw V 0V 0V of Throw SW DPST - - NE SW DPDT - - NE S7W DPDT SW DPDT - - NE () S8W DPDT () - - () S9W DPDT - - () Throw & Schematics: DPST DOUBLE POLE SOLDER LUG WITH PNEL SEL * INTERNL CNECTI DPDT (COM) 军用钮子开关价格查询全国统一热线 Note: Terminal numbers are actually on the switch (.).7 (.) Dia.9 Maximum Panel Thickness:.8 (.0mm) tuizer@.com

93 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Medium Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S SINGLE POLE SOLDER LUG WITH LOCKING LEVER & PNEL SEL * Toggle Position/Connected Terminals Electrical Capacity pprovals Down Center Up Resistive Inductive α = Pole & C C DC C V ngle Model Throw V 0V 0V PF 0. of Throw C US SL SPST - NE 0 8 SL SPDT - NE SL SPDT Throw & Schematics: (8.0).709 (8.).7 SPST Notes: Standard Hardware: T0M Face Hex Nut, T08 Lockwasher, T7 O-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. * UL & culus recognized only when ordered with marking on switch (see General Specs) *pprovals Pole & C US Model Throw (0.7) Dia. α α (7.) Dia.9 (7.8) Dia.07 (0.7) Dia. (7.) M P.9 (.) (.0).9.7 (.) (7.0).09.9 (7.) Dia.9 (7.8) Dia.07 M P (.).9 (.).09 INTERNL CNECTI Flat Flat (7.).9 (.0).7 (7.0).9 (.7).9 (.7).0 SPDT (.7). (.7). (.) Dia Typ.09 (0.8) Typ.0 (.8) Typ.89 SL does not have terminal (.) Dia Typ.09 (.8) Typ.89 SL does not have terminals & (COM) (0.8) Typ.0 (0.0).8 (.).8 Note: Terminal numbers are actually on the switch (.). (.) Dia.80 Maximum Panel Thickness:.8 (.0mm) DOUBLE POLE SOLDER LUG WITH LOCKING LEVER & PNEL SEL * Toggle Position/Connected Terminals Electrical Capacity Down Center Up Resistive Inductive Notes: Standard Hardware: T0M Face Hex Nut, T08 Lockwasher, T7 O-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. C V C 0V DC 0V (.). (.) Dia.80 Maximum Panel Thickness:.8 (.0mm) C V PF 0. SL DPST - - NE 8 SL DPDT - - NE S7L DPDT Throw & Schematics: DPST INTERNL CNECTI DPDT (COM) 军用钮子开关价格查询全国统一热线 Note: Terminal numbers are actually on the switch SL α = ngle of Throw SL tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

94 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Medium/High Capacity Standard Size GENERL SPECIFICTIS FOR S0 ~ S9 Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity (Resistive & Inductive Load) Power Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: ngle of Throw (α): Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable & Stationary Contacts: Terminals: Environmental Data Operating Temperature Range: Installation Mounting Torque: Soldering Time & Temperature: Standards & Certifications UL: CS: Shown in the following tables 0 milliohms maximum,000 megohms 00V DC,000V C minimum for minute minimum 0,000 operations minimum,000 operations minimum for SF;,000 operations minimum for all other Ss;,000 operations minimum for all others Shown on following tables PBT for flatted lever; brass with chrome plating for all others Brass with chrome plating Melamine phenol Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating 0 C ~ +70 C (+ F ~ +8 F).9Nm ( lb in) for double nut;.7nm ( lb in) for single nut Manual Soldering: See Profile in Supplement section. File No. E - Recognized only when ordered with marking on switch. dd /U or /CUL to end of part number to order UL recognized switch. UL or culus recognition designated beside part numbers on following pages. See Supplement section to find UL or culus rating details. File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C to end of part number to order CS certified switch. CS certification designated beside part numbers on following pages. See Supplement section to find CS rating details 军用钮子开关价格查询全国统一热线 tuizer@.com

95 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Medium/High Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model (.0).0 *pprovals C US (.) Dia.0 Pole & Throw (7.).89 M P (.0).7 SINGLE POLE WITH SOLDER LUG * Toggle Position/Connected Terminals ( ) = Momentary (7.).8 (.) Dia Typ. (.0) Typ. (.) Typ.0 (9.) Max.78 (8.). S0 does not have terminal Electrical Capacity Down Center Up Resistive Inductive C V C 0V (.) Dia.9 (9.0). (.0) Dia.8 DC 0V Maximum Panel Thickness:.8 (.7mm) C V PF 0. S0 ngle of Throw S0 SPST - NE 0 0 S0 SPDT - NE S0 SPDT S0 SPDT - NE () S08 SPDT () - () S09 SPDT - () Throw & INTERNL (COM) Note: Terminal numbers are Schematics: SPST CNECTI SPDT actually on the switch Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. (9.0).78 *pprovals α (.) Dia.0 Pole & Throw (7.).89 M P DOUBLE POLE WITH SOLDER LUG * (.0).7 Toggle Position/Connected Terminals ( ) = Momentary (.).988 (.7). (.) Dia Typ.09 (.8) Typ.89 (.).07 Electrical Capacity Down Center Up Resistive Inductive C V C 0V (.) Dia.9 (9.0). (.0) Dia.8 DC 0V Maximum Panel Thickness:.8 (.7mm) C V PF 0. S DPST - - NE 0 S DPDT - - NE S DPDT S DPDT - - NE () S8 DPDT () - - () S9 DPDT - - () Throw & Schematics: C US DPST INTERNL CNECTI (COM) DPDT S does not have terminals & 军用钮子开关价格查询全国统一热线 Note: Terminal numbers are actually on the switch S α = ngle of Throw tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

96 R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Medium/High Capacity Standard Size * UL & culus recognized only when ordered with marking on switch (see General Specs) DOUBLE POLE WITH SOLDER LUG & FLTTED LEVER * Toggle Position/Connected Terminals ( ) = Momentary Electrical Capacity Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Model *pprovals Notes: Standard Hardware: T0M Knurled Nut, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. Pole & Throw (9.0). Down Center Up Resistive Inductive α (.0).7 (8.). (7.0).0 M P (.0).7 (.).988 (.7). (.) Dia Typ.09 (.8) Typ.89 C V C 0V (9.0).78 DC 0V (.).07 C V PF 0. SR DPST - - NE 0 SR DPDT - - NE SR DPDT S8R DPDT () - - () S9R DPDT - - () Throw & Schematics: SR C US (COM) DPST INTERNL DPDT Note: Terminal numbers are CNECTI actually on the switch 军用钮子开关价格查询全国统一热线 SR does not have terminals & α = ngle of Throw (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.0 (.mm) tuizer@.com

97 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Medium/High Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model (.0).0 (9.0).78 *pprovals C US (.) Dia.0 (.) Dia.0 Pole & Throw Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. (7.).89 M P (7.).89 M P (.0).7 Toggle Position/Connected Terminals ( ) = Momentary (.0).7 SINGLE POLE WITH SCREW LUG (7.).8 (.0).0 (.).0 M. P0. (.0) Typ. (.0) Typ.97 (9.) Max.78 M. x (.).0 S0T does not have terminal ST does not have terminals & (.0) Typ.09 (8.). (.).07 Electrical Capacity Down Center Up Resistive Inductive C V C 0V (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.7mm) (.) Dia.9 (9.0). (.0) Dia.8 DC 0V C V PF 0. S0T SPST - NE 0 0 S0T SPDT - NE S0T SPDT S0T SPDT - NE () S08T SPDT () - () S09T SPDT - () (COM) Throw & SPST INTERNL SPDT Note: Terminal numbers are CNECTI Schematics: actually on the switch * UL & culus recognized only when ordered with marking on switch (see General Specs) Model *pprovals Pole & Throw DOUBLE POLE WITH SCREW LUG Toggle Position/Connected Terminals ( ) = Momentary Electrical Capacity Down Center Up Resistive Inductive S0T Maximum Panel Thickness:.8 (.7mm) ST α = ngle of Throw α = ngle of Throw Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. C V C 0V DC 0V C V PF 0. ST DPST - - NE 0 ST DPDT - - NE ST DPDT ST DPDT - - NE () S8T DPDT () - - () S9T DPDT - - () Throw & Schematics: C US DPST INTERNL CNECTI DPDT (COM) 军用钮子开关价格查询全国统一热线 Note: Terminal numbers are actually on the switch tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

98 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Medium/High Capacity Standard Size * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) SINGLE POLE WITH QUICK CNECT Toggle Position/Connected Terminals Electrical Capacity Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Model Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. S0F *pprovals Pole & Throw (.0).0 (9.0).78 Down Center Up Resistive Inductive (.) Dia.0 α (.) Dia.0 (7.).89 (7.).89 M P M P (.0).7 (.0).7 (7.).8 (0.).9 (9.).7 (.0). (7.9). (.7). (.) Dia Typ.00 (0.8) Typ.0 (.) Dia Typ.00 (7.) Typ.9 (.) Typ.0 (0.8) Typ.0 (8.). (.) Typ.0 (7.) Typ.9 (.).07 (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.7mm) Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. C V C 0V SF SF does not have terminals & DC 0V C V PF 0. S0F SPST - NE 0 0 Throw & Schematics: C US SPST * UL & culus recognized only when ordered with marking on switch (see General Specs) Model *pprovals Pole & Throw INTERNL CNECTI DOUBLE POLE WITH QUICK CNECT Toggle Position/Connected Terminals ( ) = Momentary Note: Terminal numbers are actually on the switch Electrical Capacity Down Center Up Resistive Inductive C V C 0V DC 0V C V PF 0. α = ngle of Throw SF DPST - - NE 0 SF DPDT - - NE SF DPDT SF DPDT - - NE () Throw & Schematics: C DPST US INTERNL CNECTI DPDT (COM) 军用钮子开关价格查询全国统一热线 Note: Terminal numbers are actually on the switch α = ngle of Throw (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.7mm) tuizer@.com

99 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Medium/High Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S GENERL SPECIFICTIS FOR S ~ S9 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Rockers Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V C minimum for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum ngle of Throw (α): Shown on following tables Materials & Finishes Toggle: PBT resin for flatted lever; brass with chrome plating for all others Bushing: Brass with chrome plating Case: Phenolic resin Case Cover: Steel with chromate plating over zinc plating Movable Contactor: Copper with silver plating Movable Contacts: Silver alloy capped on copper with silver plating Stationary Contacts: Silver alloy capped on copper with silver plating Terminals: Brass with tin plating Environmental Data Operating Temp Range: 0 C through +70 C (+ F through +8 F) Installation Mounting Torque:.9Nm ( lb in) for double nut Maximum Panel Thickness: Shown beneath panel cutout in switch dimension drawings Soldering Time & Temperature: Manual Soldering: See Profile in Supplement section. Standards & Certifications UL: File No. E - Recognized only when ordered with marking on switch. dd /U or /CUL to end of part number to order UL recognized switch. UL or culus recognition designated beside part numbers on following pages. See Supplement section to find UL or culus rating details. CS: File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C to end of part number to order CS certified switch. CS certification designated beside part numbers on following pages. See Supplement section to find CS rating details. 军用钮子开关价格查询全国统一热线 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

100 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Medium/High Capacity Standard Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) *pprovals Pole & C US Model Throw Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. S SR (0.0).8 * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model Suffix R = Flatted Lever *pprovals Pole & Throw (9.0). (.) Dia.0 (.0).7 (7.).07 (.) Dia Typ.09 (0.8) Typ.0 S does not have terminals,, & 8 8 α (.8) Typ.89 (.). 0 7 (.0).7 α (7.).89 (8.). (7.0).0 M P M P (.0).7 (7.).07 (.0).97 (.8).8 (.) Dia Typ.09 (0.8) Typ.0 (.8) Typ (.).7 S and SR do not have terminals,, 8, &. 8 7 (.8). (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.mm) Notes: Standard Hardware for Bat Lever: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut; for Flatted Lever (R): T0M Knurled Face Nut, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies (only for bat lever models): T0 & T8 boots plus hex nut and o-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. Bat lever dimensions are same as on S0 models above. FOUR POLE WITH SOLDER LUG * Toggle Position/Connected Terminals Electrical Capacity ( ) = Momentary Down Center Up Resistive Inductive α = C V C 0V DC 0V C V PF 0. S/SR PST NE S/SR PDT NE S/SR PDT S PDT NE () S8/S8R PDT () () S9/S9R PDT () Throw & Schematics: C US PST PDT (COM) 8 Note: Terminal INTERNL CNECTI THREE POLE WITH SOLDER LUG * Toggle Position/Connected Terminals Electrical Capacity ( ) = Momentary Down Center Up Resistive Inductive α = C V 9 C 0V 7 DC 0V 0 C V PF 0. S PST NE S PDT NE S PDT S PDT NE () S8 PDT () () S9 PDT () Throw & Schematics: PST 7 9 INTERNL CNECTI PDT (COM) 军用钮子开关价格查询全国统一热线 (.).00 ngle of Throw Note: Terminal numbers are on the switch ngle of Throw numbers are on the switch (.) Dia.9 (.). Max. Panel Thickness:.0 (.mm) (.) Dia.9 (9.0). (.0) Dia.8 Max. Panel Thickness:.8 (.mm) tuizer@.com

101 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Medium/High Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. ST does not have terminals,, & 8 Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. (0.0).8 (8.0).9 *pprovals (.) Dia.0 (.) Dia.0 Pole & Throw M P (7.).89 M P (7.).89 (.0).7 (.0).7 THREE POLE WITH SCREW LUG Toggle Position/Connected Terminals (9.8).7 (9.). (7.).9 (8.).7 M. x M. x ST does not have terminals,, 8, & 8 7 (.).7 (.8). (.). Electrical Capacity Down Center Up Resistive Inductive C V C 0V DC 0V (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.mm) (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.mm) C V PF 0. C 0V PF 0. ST PST NE ST PDT NE ST PDT Throw & Schematics: C US PST PDT (COM) INTERNL CNECTI 9 7 * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model *pprovals PST Pole & Throw Toggle Position/Connected Terminals INTERNL CNECTI PDT (COM) 8 9 Electrical Capacity 7 ST ST α = ngle of Throw Note: Terminal numbers are on the switch Down Center Up Resistive Inductive ST PST NE ST PDT NE ST PDT Throw & Schematics: C US FOUR POLE WITH SCREW LUG 军用钮子开关价格查询全国统一热线 C V C 0V DC 0V C V PF 0. 0 C 0V PF 0. α = ngle of Throw Note: Terminal numbers are on the switch tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

102 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Medium/High Capacity Standard Size * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) THREE POLE WITH QUICK CNECT Toggle Position/Connected Terminals Electrical Capacity Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Model (0.0).8 (.) Dia.0 (7.).89 M P (.0).7 (.). (7.9). (.0). (.) Dia Typ.00 (7.) Typ.9 9 SF SF does not have terminals,, & 8 SF *pprovals Pole & Throw Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. (.).7 Down Center Up Resistive Inductive (.0) Dia. M P (7.).89 (.0).7 (.).0 (7.9). (.8). (.) Typ.0 (0.8) Typ.0 (.) Dia Typ.00 (7.) Typ.9 (.) Typ.0 (0.8) Typ.0 C V C 0V (.8). 9 (.). SF does not have terminals,, 8, & 8 7 DC 0V C V PF 0. SF PST NE SF PDT NE SF PDT Throw & Schematics: C PST * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model US *pprovals Pole & Throw 7 9 INTERNL CNECTI Toggle Position/Connected Terminals PDT (COM) α = ngle of Throw Note: Terminal numbers are on the switch Electrical Capacity (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.mm) Down Center Up Resistive Inductive C V C 0V DC 0V C V PF 0. SF PST NE SF PDT NE SF PDT Throw & Schematics: C US FOUR POLE WITH QUICK CNECT PST PDT (COM) 8 Note: Terminal INTERNL CNECTI 军用钮子开关价格查询全国统一热线 α = ngle of Throw numbers are on the switch (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.mm) tuizer@.com

103 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Medium/High Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S GENERL SPECIFICTIS FOR S ~ S9 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Rockers Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: ngle of Throw (α): Materials & Finishes Environmental Data Installation Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Operating Temp Range: Mounting Torque: Maximum Panel Thickness: Soldering Time & Temperature: 0 milliohms maximum,000 megohms 00V DC,000V C minimum for minute minimum 0,000 operations minimum,000 operations minimum Shown in tables on following pages Brass with chrome plating Brass with chrome plating Melamine phenol Steel with chromate plating over zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating 0 C through +70 C (+ F through +8 F).9Nm ( lb in) for double nut Shown beneath panel cutout in switch dimension drawings Manual Soldering: See Profile in Supplement section. 军用钮子开关价格查询全国统一热线 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

104 R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK Medium/High Capacity Standard Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. * Wire harness & cable assemblies offered only in mericas. S ST (9.0).78 α (.) Dia.0 M P (7.).89 (.0).7 S does not have terminals & ST does not have terminals & (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.7mm) Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssemblies: T0 & T8 boots plus hex nut & o-ring. See ccessories & Hardware section. (9.0).78 α (.) Dia.0 (7.).89 (.0).7 (.).988 (.7). (.). (.) Dia Typ.09 (.8) Typ.89 M P M X (.0). Toggle Position/Connected Terminals ( ) = Momentary Electrical Capacity pprovals Down Center Up Motor Resistive Inductive Load α = Pole & C C PF C ngle Model Throw V 0V C V C 0V V of Throw ST DPST - - NE W ST DPDT - - NE W ST DPDT W 8 ST DPDT - - NE () W S8T DPDT () - - () W S9T DPDT - - () W Throw & Schematics: DPST DOUBLE POLE WITH SOLDER LUG * Toggle Position/Connected Terminals ( ) = Momentary DOUBLE POLE WITH SCREW LUG INTERNL CNECTI DPDT (COM) Electrical Capacity pprovals Down Center Up Motor Resistive Inductive Load α = Pole & C C PF C ngle Model Throw V 0V C V C 0V V of Throw S DPST - - NE 70W S DPDT - - NE W S DPDT W 8 S DPDT - - NE () W S8 DPDT () - - () W S9 DPDT - - () W Throw & DPST (COM) INTERNL DPDT Note: Terminal numbers Schematics: CNECTI are on the switch 军用钮子开关价格查询全国统一热线 (0.8) Typ.0 (.).07 Note: Terminal numbers are on the switch (.).07 (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.8 (.7mm) tuizer@.com

105 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 High Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S GENERL SPECIFICTIS FOR S800s ~ S7 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Rockers Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V C minimum for minute minimum for S800s & S800Ds,000V C minimum for minute minimum for S7 Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum for S800Ds,000 operations minimum for S800s & S7 Materials & Finishes Toggle: Brass with nickel plating for S7 Brass with chrome plating for S800s & S800Ds Bushing: Brass with chrome plating Case: Phenolic resin for S7; melamine phenol for S800s Case Cover: Steel with chromate plating over zinc plating Movable Contactor Plate: Copper with silver plating Movable & Stationary Contacts: Silver alloy capped on copper with silver plating Common Terminals: Brass Contact Terminals: Brass with silver or nickel plating Environmental Data Operating Temp Range: 0 C through +70 C (+ F through +8 F) Installation Mounting Torque:.9Nm ( lb in) for double nut Maximum Panel Thickness: Shown beneath panel cutout in switch dimension drawings Standards & Certifications UL: File No. E - Recognized only when ordered with marking on switch. dd /U or /CUL to end of part number to order UL recognized switch. UL or culus recognition designated beside part numbers on following pages. See Supplement section to find UL or culus rating details. CS: File No. 0_0_000 - Certified only when ordered with marking on switch. dd /C to end of part number to order CS certified switch. CS certification designated beside part numbers on following pages. See Supplement section to find CS rating details. 军用钮子开关价格查询全国统一热线 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

106 R R R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK High Capacity Standard Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssembly: T0 boot plus hex nut & o-ring. See ccessories & Hardware section. S8 8 (.) Dia.0 (.0).8 M P S8 does not have terminals & Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. Optional Splashproof Boot ssembly: T0 boot plus hex nut & o-ring. See ccessories & Hardware section. *pprovals Pole & Throw 8 (.) Dia.0 DOUBLE POLE WITH SCREW LUG Toggle Position/Connected Terminals Down Center Up (.0).8 M P (.0).7 S8 S8 does not have terminals, & 7 (.0).7 (.0).9 (.0).9 M.x (.0) Typ.7 C V M.x (.0) Typ Resistive C 0V Electrical Capacity (.) Typ.7 DC 0V (.0).9 (.0).7 (.0).9 DC V C V PF 0. (.0). (.0). Inductive C 0V PF 0. S8 DPST - - NE W S8 DPDT - - NE S8 DPDT Throw & Schematics: C DPST * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) *pprovals Pole & C US Model Throw US (COM) DPDT Toggle Position/Connected Terminals (COM) Electrical Capacity (.) Dia.9 (9.0). (.0) Dia.8 Motor Load C V Note: Terminal numbers are on the switch Maximum Panel Thickness:.77 (.mm) Down Center Up Resistive Inductive C V C 0V DC 0V DC V C V PF 0. S8 PST NE S8 PDT NE S8 PDT Throw & Schematics: PST THREE POLE WITH SCREW LUG (COM) 8 9 PDT (COM) 军用钮子开关价格查询全国统一热线 C 0V PF 0. Note: Terminal numbers are on the switch (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.77 (.mm) tuizer@.com

107 R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 High Capacity Standard Size IP8 防水钮子开关厂家 NKK Series S * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. *pprovals (9.0). Pole & Throw 8 (.0).7 (8.). (7.0).0 Toggle Position/Connected Terminals M P (.0).7 (.0).9 M.x (.0) Typ.7 Double Pole (.0).7 (.0).9 (.0). (.) Dia.9 (9.0). S8D does not have terminals & Electrical Capacity Down Center Up Resistive Inductive L/R = ms S8D DPST - - NE (0) 0 S8D DPDT - - NE S8D DPDT Throw & Schematics: C US DPST DOUBLE POLE WITH SCREW LUG & FLTTED LEVER DC 0V DC 8V DC V DC 0V (COM) (COM) DPDT 00V DC WIRING INSTRUCTIS. DC switch use Middle terminal shall be the minus pole when using DC circuit. Switch case is marked with (+) and (-). Do not store near (cm) highly magnetic items. If actuation is interrupted when switching from to, arcing may continue and switch could be burned.. Wiring for DC00V 0 External Connection Minus Pole Connection Plus Pole Connection () () () () Contact Connection Position. Inductive load DC 00V (.0) Dia.8 Maximum Panel Thickness:.77 (.mm) DC V DC 8V DC V DC 0V ( ) capacity is due to wiring. Refer to instructions below. (9.8).8 (9.8).8 Note: Terminal numbers are on the switch Inductive loads produce an arc caused by counter-electromotive force when opening the circuit. Recommend inserting spark elimination circuit. Contact factory for details. Contact Point 军用钮子开关价格查询全国统一热线 R C. Compressed terminal connection When connecting screw terminal with compressed terminal, select compressed terminal using drawing below. D L (Patent Pending) S8D tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

108 R R 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series S IP8 防水钮子开关厂家 NKK High Capacity Standard Size Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers * UL, culus & CS recognized only when ordered with marking on switch (see General Specs) Model *pprovals (9.0). Pole & Throw Toggle Position/Connected Terminals S8D Electrical Capacity Down Center Up Resistive Inductive L/R = ms S8D PST NE S8D PDT NE S8D PDT Throw & Schematics: C US PST THREE POLE WITH SCREW LUG & FLTTED LEVER (COM) 8 9 PDT DC 0V DC 8V DC V (COM) DC 0V (.) Typ.7 DC V Three Pole (.0).9 DC 8V DC V (.0). DC 0V Note: Terminal numbers are on the switch Notes: Standard Hardware: T0M Face Hex Nut, T0M Locking Ring, T08 Lockwasher, T7M Backup Hex Nut. See ccessories & Hardware section. 8 (.0).7 (8.). (7.0).0 M P (.0).7 (.0).9 M.x (.0) Typ.7 S8D does not have terminals, & 7. Positive (+) must be connected to end terminals & negative to common terminals (.) Dia.9 (9.0). (.0) Dia.8 Maximum Panel Thickness:.77 (.mm) 军用钮子开关价格查询全国统一热线 tuizer@.com

109 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series TL IP8 防水钮子开关厂家 NKK Fully Illuminated Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Power Level V C 0V C V DC for silver Logic Level (gold): 0.V 8V C/DC maximum for gold (pplicable Range 0.m ~ 0mV ~ 8V) Note: See Supplement Index for explanation of operating range. Other Ratings Contact Resistance: 0 milliohms maximum for silver; 0 milliohms maximum for gold Insulation Resistance:,000 megohms 00V DC Dielectric Strength:,000V C minimum between contacts for minute minimum;,00v C minimum between contacts & case for minute minimum Mechanical Life: 0,000 operations minimum Electrical Life:,000 operations minimum for silver; 0,000 operations minimum for gold Static Capability: Withstands 0 kilovolts ESD minimum Nominal Operating Force:.9N for.89 (7.mm) toggle;.n for. (.0mm) toggle ngle of Throw: Materials & Finishes Toggle: Housing: Sealing Ring: Base: Movable Contactor: Movable Contacts: Stationary Contact: Lamp Contacts: Power Terminals: Lamp Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Mounting Torque: Soldering Time & Temperature: Standards & Certifications Flammability Standards: Polycarbonate Glass fiber reinforced polyamide Nitrile butadiene rubber Diallyl phthalate (UL9V-0) Phosphor bronze with silver or gold plating Silver alloy or copper with gold plating Silver plus copper with silver plating or copper with gold plating Beryllium copper with silver plating Copper with silver or gold plating Brass with silver plating 0 C through + C (+ F through + F) 90 ~ 9% humidity for 0 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for.7 hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction).98nm (8.7 lb in) maximum Manual Soldering: See Profile B in Supplement section. UL9V-0 base 军用钮子开关价格查询全国统一热线 tuizer@.com

110 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Fully Illuminated IP8 防水钮子开关厂家 NKK Series TL Distinctive Characteristics Choice of long or short toggles in translucent colors combine with bright LEDs available in red, amber, and green, plus super bright LEDs available in white, green, and blue. Black face nut enhances front panel appearance. ntistatic material used for toggle withstands 0 kilovolts electrostatic discharge. Panel seal, achieved with use of optional exterior o-ring, conforms to IP of IEC09 Standards. Interior o-ring protects contacts from oil, dust, water, and other contaminants. UL9V-0 flammability rated for base. High insulating barriers protect against crossover. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. 军用钮子开关价格查询全国统一热线 ctual Size tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

111 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series TL IP8 防水钮子开关厂家 NKK Fully Illuminated TYPICL SWITCH ORDERING EXMPLE Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers TL Pole DPDT D N W0 Circuit NE D S C D F N Toggle Lengths.89 (7.mm) (combines with silver contacts only). (.0mm) (combines with gold contacts only) DPDT -NE- Circuit Solder Lug Terminals Toggle Colors For Bright Red mber Green For Super Bright No Color W0 G0 DESCRIPTI FOR TYPICL ORDERING EXMPLE TLDNW0G Housing Black Terminals, Contacts & Ratings G LED Colors Bright C Red D mber F Green Super Bright B White F Green G Blue Solder Lug Terminals * V C for.89 (7.mm) Toggle only Solder Lug Terminals * Gold 8V C/DC for. (.0mm) Toggle only.89 (7.mm) Toggle Length; No Color (matte finish of clear material) Blue, Super Bright LED Black Housing Silver Contacts with -amp Rating 军用钮子开关价格查询全国统一热线 * Wire harness & cable assemblies offered only in mericas tuizer@.com

112 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Fully Illuminated IP8 防水钮子开关厂家 NKK Series TL POLE & CIRCUIT Toggle Position Connected Terminals Throw & Power/Lamp Schematics Pole Model Down Center Up Down Center Up Notes: Terminal numbers are not actually on switch. Lamp circuit is isolated and requires an external power source. Rockers DP TL NE -b -b OPEN -a -a D.89 (7.mm) Combines with Silver Contacts only Material: Polycarbonate Black CTCT MTERILS, RTINGS, & TERMINLS W Silver Contacts Power Level V C 0V C V DC G Gold Contacts Logic Level 0.V 8V C/DC See Supplement Index for complete explanation of operating range. TOGGLE LENGTHS & COLORS S. (.0mm) (7.).89 (.0). Combines with Gold Contacts only Material: Polycarbonate HOUSING The housing consists of the one-piece bushing/case of glass fiber reinforced polyamide in black color only. DPDT a Colors vailable for Bright LED C D Red mber F Green Color vailable for Super Bright LED No Color (ppearance is matte N finish of clear material) The diallyl phthalate material used for the base is UL flammability rated 9V-0; housing material is not. Solder Lug Terminals LED CODES & SPECIFICTIS (.). Exopy Seal (COM) b (.7).0 Turret LED Thk = (0.).0 a (.0) b (.0).079 (.0) (.).8.8 (.0) Typ.079 (.) Typ.0.97 Solder Lug Thk = (0.8) Typ.0 Electrical specifications are determined at a basic temperature of C. Lamp circuit is independent of switch operation. If the source voltage is greater than rated voltage, a ballast resistor is required. The ballast resistor calculation and more lamp detail are shown in Supplement section. Super Bright LEDs are Electrostatic Sensitive TTENTI ELECTROSTTIC SENSITIVE DEVICES Colored Bright Clear Super Bright (+) (-) LED Factory ssembled C D F B F G Not vailable Separately Color Red mber Green White Green Blue Forward Peak Current I FM 0m 0m 0m 0m 0m 0m Typical Forward Current I F 0m 0m 0m 0m 0m 0m Forward Voltage V F.0V.V.7V.V.V.V Reverse Peak Voltage V RM V V V V V V Current Reduction Rate bove C I F 0.m/ C 0.m/ C 0.0m/ C 0.0m/ C 0.0m/ C 0.0m/ C mbient Temperature Range 0 C ~ + C 0 C ~ + C 军用钮子开关价格查询全国统一热线 tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

113 I I 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series TL IP8 防水钮子开关厂家 NKK Fully Illuminated TYPICL SWITCH DIMENSIS 7.mm Toggle Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers TLDNW0G.0mm Toggle TLSCG0C T7M Black Hex Nut Use as Face Nut Chrome/Steel (.0).0 M P (.0). (.0).079 Maximum Panel Thickness with Standard Hardware.7 (.0mm) (.).77 (8.0) Sq.709 (.0). (8.0) Sq.709 (.).098 (.).098 T7M Hex Nut Use as Backup Nut Nickel/Steel (.0) Dia. (7.).89 STNDRD HRDWRE (.0).0 M P (.0). (.0).079 M P M P (.0). (0.0).9 (0.0).9 Panel Cutouts (.).8 (.0).87 (.).8 (.0).87 (.). (.). T08 Lockwasher Not to use with Panel Seal Steel with Chromate/Zinc (.0).09 (.).7 (.8) Dia. (.8) Dia. (0.).00 Hardware details in ccessories & Hardware section. (.) Dia.9 (.) Dia.9 军用钮子开关价格查询全国统一热线 (.).00 (.). (.) x (.0) Typ.0 x.079 (0.) Typ.0 (.7) Typ (.).8. (0.8) Typ.0 (0.) Typ.00 (.) x (.0) Typ.0 x.079 (0.) Typ.0 (.7) Typ (.).8. (0.8) Typ.0 (0.) Typ.00 T0P O-ring Use for Panel Seal Nitrile butadiene rubber b a b a L ( ) v I L ( ) vi L ( ) I v L ( ) vi (.7) Typ.0 b a (.7) Typ.0 b a (.0) Typ.079 (.0) Typ.97 (.0) Typ.079 (.0) Typ.97 OPTIL HRDWRE Maximum Panel Thickness with Standard Hardware & T0P O-ring. (.0mm) (.) Dia.7 (7.) Dia.89 (.).09 tuizer@.com

114 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series WT IP8 防水钮子开关厂家 NKK Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity (Resistive Load) Power Level: V C 0V C or 0V DC Other Ratings Contact Resistance: 0 milliohms maximum for solder lug & screw terminal models; 0 milliohms maximum for wire lead terminal models Insulation Resistance: 00 megohms 00V DC Dielectric Strength:,00V C minimum for minute minimum Mechanical Life: 0,000 operations minimum for On-None-Off, On-None-On, & On-Off-On models 0,000 operations minimum for all other models Electrical Life:,000 operations minimum ngle of Throw: Materials & Finishes Toggle: Brass with chrome plating Bushing & Outer Case: Fiberglass reinforced polyamide (UL9V-0) Inner Case: Melamine Inner Sealing Ring: Nitrile butadiene rubber for On-None-Off, On-None-On, & On-Off-On models; silicone rubber for all other models Outer Sealing Ring: Natural rubber Movable Contactor: Copper with silver plating Movable Contacts: Silver alloy plus copper with silver plating Stationary Contacts: Silver alloy plus copper with silver plating Terminals: Copper with tin plating for solder lug & wire lead; brass with silver plating for screw lug Wire Lead Covers: Heat resistant polyvinyl chloride (Leads are WG ) Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Front Panel Seal: Behind Panel Seal: Installation Soldering Time & Temp: Mounting Torque: 0 C through +70 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) IP7 of IEC09, dust tight & water protected during temporary immersion for all models; optional toggle boot T0 for additional protection (details at end of WT section) IP0 of IEC09, dust tight but not water protected for solder lug & screw terminal models IP7 of IEC09, dust tight & water protected during temporary immersion for wire lead models Manual Soldering: See Profile in Supplement section..7nm ( lb in) Standards & Certifications Flammability Standards: UL9V-0 outer case Wiring Material Standards: UL WM 0 Recognized at Flammability VW-; Temperature Range 0 C ~ +0 C; Maximum Load 00V; WG. CS TEW 0 Certified at Temperature Range 0 C ~ +0 C; Maximum Load 00V 军用钮子开关价格查询全国统一热线 tuizer@.com

115 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Environmentally Sealed IP8 防水钮子开关厂家 NKK Series WT Distinctive Characteristics Sealing for wire lead models meets IP7 of IEC09 Standards at front and back panel. Sealing for solder lug or screw lug models meets IP7 at front panel and IP0 at back panel. Single unit construction of bushing and case gives added protection from environmental elements. Epoxy sealed base covered by outer case doubles protection from dust and water (not operable under water or oil). Specially designed contact mechanism that breaks light contact welds for circuits,, and. Interlocked movable contact mechanism provides highly reliable switching by minimizing contact bounce over center contact. Heat resistant resin used for outer housing meets UL9V-0 flammability standard and provides high arc and tracking resistance. 军用钮子开关价格查询全国统一热线 ctual Size Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

116 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series WT IP8 防水钮子开关厂家 NKK Environmentally Sealed Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Pole Model Poles WT SPST SPDT DPST DPDT DPDT -NE- Circuit TYPICL SWITCH ORDERING EXMPLE Circuits NE NE NE () 8 () () 9 () ( ) = Momentary DESCRIPTI FOR TYPICL ORDERING EXMPLE WTS Solder Lug Terminals S T L S Terminals Solder Lug* Screw Lug Wire Lead Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Down Center Up Down Center Up Note: SP WT NE a-b OPEN OPEN SPST SP WT WT WT WT8 WT9 Flat () NE NE () () () DP WT NE POLES & CIRCUITS -b OPEN -a SPDT a-b a-b WT NE WT -b DP WT NE () OPEN -b WT8 () () WT9 () 军用钮子开关价格查询全国统一热线 Flat OPEN OPEN DPST -a -a DPDT * Wire harness & cable assemblies offered only in mericas Terminal numbers are not actually on wire lead models. a a a (COM) b a (COM) (COM) b b (COM) a a b tuizer@.com b b

117 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Environmentally Sealed IP8 防水钮子开关厂家 NKK Series WT TYPICL SWITCH DIMENSIS Single Throw Solder Lug (.7) Dia. (.7) Dia. (.7) Dia. Flatted M P (7.).89 Flatted M P (7.).89 Flatted M P (7.).89 (9.).78 (9.).78 (9.).78 (.0).09 (.0).09 (.0).09 (7.).07 (7.).07 (0.).0 (.8).89 (.8).89 (8.).7 (.) Dia Typ.09 (0.8) Typ.0 (.) Typ. (0.8) Typ.0 (.) Dia Typ.09 (.) Typ. M. x (.0).09 b a (.8).89 (9.).7 Single Pole b a (.8).89 (9.).7 Single Pole b a (.).0 (9.).7 Single Pole 军用钮子开关价格查询全国统一热线 (8.8). (8.8). (8.8). b b a a (9.).7 Double Pole b b a a (9.).7 Double Pole b b a a (9.).7 Double Pole (8.8). (.8).89 WTS Double Throw Solder Lug (8.8). (.8).89 Single Throw Screw Lug (8.8). (.).0 WTS WTT tuizer@.com Rockers Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons

118 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Series WT IP8 防水钮子开关厂家 NKK Environmentally Sealed TYPICL SWITCH DIMENSIS Double Throw Screw Lug Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers WTT Single & Double Pole Wire Lead WTL Wire leads are covered with heat resistant vinyl in accordance to UL 0 and CS TEW 0 Standards for ppliance Wiring Material (WM). (.7) Dia. (.7) Dia. Flatted M P (7.).89 (9.).78 (.0).09 (0.).0 (8.).7 M. x (.).0 (.0).09 (0.0).9 (00.0) + - (0.0) 7.87 STNDRD WIRE COLOR SCHEME Terminal Numbers & Wire Colors a b a b WT Black White WT-9 White Black Red Single Pole Single Pole Double Pole Double Pole WT Black White Blue Yellow WT-9 White Black Red Yellow Blue Green 军用钮子开关价格查询全国统一热线 Flatted M P (7.).89 (9.).78 (.0).09 (.). b a (9.).7 (0.8).89 b a (8.8). (0.).89 b b a a (9.).7 b (0.8).89 b a a (8.8). (0.).89 tuizer@.com

119 进口摇头开关 IP7 防水钮子开关进口钮子开关选型说明书进口摇杆开关 Environmentally Sealed PNEL CUTOUT & THICKNESS IP8 防水钮子开关厂家 NKK Series WT (.). (.) Dia.9 Maximum Effective Panel Thickness With Standard Hardware:.7 (.0mm) With optional Boot ssembly T0/H/S:.0 (.mm) With optional Boot ssembly T8:.08 (.mm) Rockers T0M Hex Face Nut Material: Brass with Chrome Plating supplied with each switch (.0).0 M P (.). (.).09 T0 for Oil Resistance Boot Material: Black nitrile butadiene rubber Hex Nut Material & Finish: Nickel plated brass O-ring Material: Nitrile butadiene rubber (0.0) (.7).9 (.)..0 T8 Splashproof Boot ssembly Boot Material: Black Silicon rubber (.) ~ (.).8.7 (.) Max.0 Nut Material & Finish: Nickel plated brass O-ring Material: Nitrile butadiene rubber STNDRD HRDWRE T08 Internal Tooth Lockwasher Material: Steel with Zinc/Chromate supplied with each switch OPTIL CCESSORIES Boot ssemblies for High Particulate Contamination pplications (7.) Dia.89 (7.0) Dia.9 (.0) Dia.0 T0H for Dust & Ozone Resistance Boot Material: Gray ethylene propylene rubber Hex Nut Material & Finish: Nickel plated brass O-ring Material: Nitrile butadiene rubber (0.0).9 (.7). (.0) Dia.0 Note: When using boot assemblies T0/H/S or T8, also use o-ring T0P from the standard hardware supplied. Hex face nut T0M and lockwasher T08 are not used with these boot assemblies. 军用钮子开关价格查询全国统一热线 (.0).09 (.8).8 (8.).7 (.).97 (.0).09 Boot Hex Nut O-ring Panel O-ring (.).08 (.).7 (.8) Dia. (.8) Dia. (0.).00 (7.0).9 M P (.).09 (.) Dia.7 (7.) Dia.89 (8.0) Dia. (.8) Dia. (.) Dia.8 Boot O-ring Panel O-ring T0P O-ring Material: Nitrile butadiene rubber supplied with each switch Boot Hex Nut O-ring (.) Dia.7 (7.) Dia.89 (.).09 T0S for Retention of Flexibility, Resilience & Tensile Strength Over Wide Temperature Range Boot Material: Black silicone rubber Hex Nut Material & Finish: Nickel plated brass O-ring Material: Nitrile butadiene rubber (.8).8 (8.).7 (.).97 (8.0) Dia. (.) Dia.8 M P (.0).09 (.) Dia.7 (7.) Dia.89 Boot & Nut O-ring tuizer@.com Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons