Transcription

1 Question? 有疑问? Contact Philips 请联系飞利浦 S7780 S7720 S7530

2

3 1

4

5 ENGLISH 6 简体中文 32 S7780, S7720, S7530

6 6 ENGLISH Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at welcome. Please read this user manual, as it contains information about the features of this shaver as well as some tips to make shaving easier and more enjoyable. General description (Fig. 1) 1 Protection cap for cleansing brush attachment 2 Click-on cleansing brush attachment 3 Comb for beard styler attachment (specific types only) 4 Click-on beard styler attachment (specific types only) 5 Click-on trimmer attachment (specific types only) 6 Click-on shaving unit 7 Handle 8 Socket for small plug 9 Battery charge indicator 10 Unplug for use symbol 11 Travel lock symbol 12 Replacement reminder 13 Cleaning reminder 14 Cleaning cartridge for SmartClean system 15 SmartClean system (specific types only) 16 Cap of SmartClean system 17 On/off button 18 Charge symbol 19 Ready symbol 20 Replacement symbol 21 Cleaning symbol 22 Adapter 23 Small plug 24 Pouch

7 ENGLISH 7 Important Read this important information carefully before you use the shaver and the SmartClean system (specific types only). Save this leaflet for future reference. Danger Keep the adapter dry. Warning The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Always unplug the shaver before you clean it under the tap. Caution Never immerse the SmartClean system in water nor rinse it under the tap. Never use water hotter than 80 C to rinse the shaver. Do not use the shaver, SmartClean system, adapter or any other part if it is damaged, as this may cause injury. Always replace a damaged adapter or part with one of the original type. Only use the SmartClean system with the original SmartClean cleaning cartridge. Always place the SmartClean system on a stable, level and horizontal surface to prevent leakage.

8 8 ENGLISH When the SmartClean system is ready for use, do not move it to prevent leakage of cleaning fluid. Always make sure that the cartridge compartment is closed before you use the SmartClean system to clean or charge the shaver. The SmartClean system thoroughly cleans but does not disinfect your shaver, therefore do not share the shaver with others. Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Water may leak from the socket at the bottom of the shaver when you rinse it. This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver. Compliance with standards This shaver is waterproof and complies with the internationally approved safety regulations. It is suitable for use in the bath or shower and for cleaning under the tap. For safety reasons, the shaver can therefore only be used cordlessly. The shaver and the SmartClean system comply with all applicable standards and regulations regarding exposure to electromagnetic fields. General The adapter is equipped with an automatic voltage selector and is suitable for mains voltages ranging from 100 to 240 volts. The adapter transforms volts to a safe low voltage of less than 24 volts.

9 ENGLISH 9 The display Charging Note: This appliance can only be used cordlessly. Charging takes approx. 1 hour. Quick charge: When the appliance is connected to the mains, the lights of the battery charge indicator light up one after the other continuously. When the shaver contains enough energy for one shave, the bottom light of the battery charge indicator starts to flash slowly. If you leave the appliance connected to the mains, the charging process continues. To indicate that the appliance is charging, first the bottom light flashes white and then lights up white continuously. Then the second light flashes and then lights up continuously, and so on until the shaver is fully charged. Battery fully charged Note: This appliance can only be used cordlessly. Note: When the battery is full, the display switches off automatically after 30 minutes. When you press the on/off button during charging, the unplug for use symbol flashes white to remind you that you have to disconnect the appliance from the mains. When the battery is fully charged, all lights of the battery charge indicator light up white continuously.

10 10 ENGLISH Battery low When the battery is almost empty, the bottom light flashes orange. Remaining battery capacity The remaining battery capacity is indicated by the lights of the battery charge indicator that light up continuously. Cleaning reminder For optimal shaving performance, we advise you to clean the shaver after every use. When you switch off the shaver, the cleaning reminder flashes to remind you to clean the shaver. Travel lock You can lock the shaver when you are going to travel. The travel lock prevents the shaver from being switched on by accident. Activating the travel lock 1 Press the on/off button for 3 seconds to enter the travel lock mode.,, While you activate the travel lock, the travel lock symbol lights up white continuously. When the travel lock is activated, the travel lock symbol flashes.

11 ENGLISH 11 Deactivating the travel lock 1 Press the on/off button for 3 seconds.,, The travel lock symbol flashes and then lights up continuously. The shaver is now ready for use again. Replacing shaving heads For maximum shaving performance, we advise you to replace the shaving heads every two years. The appliance is equipped with a replacement reminder which reminds you to replace the shaving heads. The replacement reminder lights up white continuously. Note: After replacing the shaving heads, you need to reset the shaver by pressing the on/off button for 7 seconds. Unplug for use reminder The appliance is equipped with an unplug for use reminder. The unplug for use symbol flashes white to remind you that you have to disconnect the appliance from the mains.

12 12 ENGLISH Charging Charging takes approx. 1 hour. A fully charged shaver has a shaving time of up to 50 minutes. Note: This appliance can only be used cordlessly. Charge the shaver before you use it for the first time and when the display indicates that the battery is almost empty. Charging with the adapter 1 Make sure that the appliance is switched off. 2 Insert the small plug into the appliance (1) and put the adapter in the wall socket (2). Charging in the SmartClean system (specific types only) 1 Put the small plug in the SmartClean system. 2 Put the adapter in the wall socket. 3 Press the top cap to be able to place the shaver in the holder ( click ). 4 Hold the shaver upside down above the holder. Make sure the front of the shaver points towards the SmartClean system.

13 ENGLISH 13 5 Place the shaver in the holder (1), tilt the shaver backwards (2) and press down the top cap to connect the shaver ( click ). Note: The battery symbol flashes slowly to indicate the appliance is charging. Using the shaver Shaving Skin adaptation period Your first shaves may not bring you the result you expect and your skin may even become slightly irritated. This is normal. Your skin and beard need time to adapt to any new shaving system. We advise you to shave regularly (at least 3 times a week) with this shaver for a period of 3 weeks to allow your skin to adapt to the new shaver. Note: This appliance can only be used cordlessly. 1 Press the on/off button once to switch on the shaver.,, The display lights up for a few seconds. 2 Move the shaving heads over your skin in circular movements. Note: Do not make straight movements. 3 Press the on/off button once to switch off the shaver.,, The display lights up for a few seconds to show the remaining battery charge percentage.

14 14 ENGLISH Wet shaving You can also use this shaver on a wet face with shaving foam or shaving gel. To shave with shaving foam or shaving gel, follow the steps below: 1 Apply some water to your skin. 2 Apply shaving foam or shaving gel to your skin. 3 Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin. 4 Press the on/off button once to switch on the shaver. 5 Move the shaving heads over your skin in circular movements. Note: Rinse the shaver under the tap regularly to ensure that it continues to glide smoothly over your skin. 6 Dry your face and thoroughly clean the shaver after use (see chapter Cleaning and maintenance ). Note: Make sure you rinse all foam or shaving gel off the shaver.

15 Using the click-on attachments ENGLISH 15 Using the beard styler attachment (specific types only) 1 Make sure that the appliance is switched off. 2 Pull the shaving unit straight off the appliance. Note: Do not twist the shaving unit while you pull it off the appliance. 3 Insert the lug of the beard styler attachment into the slot in the top of the appliance. Then press down the beard styler attachment to attach it to the appliance ( click ). Using the beard styler attachment with comb You can use the beard styler attachment with the comb attached to style your beard at one fixed setting, but also at different length settings. The hair length settings on the beard styler attachment correspond to the remaining hair length after cutting and range from 1 to 5mm. 1 Slide the comb straight into the guiding grooves on both sides of the beard styler attachment ( click ). 2 Press the length selector and then push it to the left or right to select the desired hair length setting. 3 Press the on/off button once to switch on the appliance. 4 You can now start styling your beard.

16 16 ENGLISH Using the beard styler attachment without comb You can use the beard styler attachment without the comb to contour your beard, moustache, sideburns or neckline. 1 Pull the comb off the beard styler attachment. Note: Grab the comb in the centre to pull it off the beard styler attachment. Do not pull at the sides of the comb. 2 Press the on/off button once to switch on the appliance. 3 You can now start contouring your beard, moustache, sideburns or neckline. Using the trimmer attachment (specific types only) You can use the trimmer attachment to groom your sideburns and moustache. 1 Make sure that the appliance is switched off. 2 Pull the shaving unit straight off the appliance. Note: Do not twist the shaving unit while you pull it off the appliance. 3 Insert the lug of the trimmer attachment into the slot in the top of the appliance. Then press down the trimmer attachment to attach it to the appliance ( click ). 4 Press the on/off button once to switch on the appliance. 5 You can now start trimming.

17 ENGLISH 17 Using the cleansing brush attachment Use the rotating cleansing brush attachment with your daily cleansing cream. The cleansing brush attachment removes oil and dirt, contributing to a healthy and oil-free skin. 1 Pull the shaving unit straight off the appliance. Do not twist the shaving unit while you pull it off the appliance. 2 Insert the lug of the cleansing brush attachment into the slot in the top of the appliance. Then press down the cleansing brush attachment to attach it to the appliance ( click ). 3 Moisten the cleansing brush attachment and your face with warm water and cleansing cream. Tip: Use the cleansing brush attachment before shaving for easier shaving and a more hygienic shaving result. 4 Press the on/off button to switch on the appliance. 5 Start cleaning the T-zone with the cleansing brush attachment. Note: Make circular motions, but not more than 3 times in one spot. 6 Start cleansing the rest of your face. Tip: Treat your face with the cleansing brush attachment for about one minute. Caution: Do not clean the sensitive area around your eyes.

18 18 ENGLISH Cleaning and maintenance Cleaning the shaver in the SmartClean system (specific types only) Do not tilt the SmartClean to prevent leakage. Note: Hold the SmartClean while you prepare it for use. Preparing the SmartClean system for use 1 Put the small plug in the back of the SmartClean system. 2 Put the adapter in the wall socket. 3 Press the button on the side of the SmartClean system (1) and lift the top part of the SmartClean system (2). 4 Pull the seal off the cleaning cartridge. 5 Place the cleaning cartridge in the SmartClean system. 6 Push the top part of the SmartClean system back down ( click ).

19 Using the SmartClean system ENGLISH 19 Always make sure to shake excess water off the shaver before you place it in the SmartClean. 1 Press the top cap to be able to place the shaver in the holder ( click ). 2 Hold the shaver upside down above the holder. Make sure the front of the shaver points towards the SmartClean system. 3 Place the shaver in the holder (1), tilt the shaver backwards (2) and press down the top cap to connect the shaver ( click ).,, The battery symbol starts to flash, which indicates that the shaver is charging. 4 Press the on/off button on the SmartClean system to start the cleaning program.,, The rinsing symbol starts to flash slowly. Note: The cleaning program takes approx. 10 minutes.

20 20 ENGLISH,, When the cleaning program has been completed, the ready symbol lights up continuously.,, The battery symbol lights up continuously to indicate that the shaver is fully charged. This takes approx. 1 hour. Note: If you press the on/off button of the SmartClean system during the cleaning program, the program aborts. In this case, the cleaning symbol stops flashing. Note: If you remove the adapter from the wall socket during the cleaning program, the program aborts. Note: 30 minutes after the cleaning program and charging have been completed, the SmartClean switches off automatically. Replacing the cartridge of the SmartClean System Replace the cleaning cartridge when the replacement reminder flashes orange or when you are no longer satisfied with the result. 1 Press the button on the side of the SmartClean system (1) and lift the top part of the SmartClean system (2). 2 Take the empty cleaning cartridge from the SmartClean system and pour any remaining cleaning fluid out of the Cleaning cartridge. You can simply pour the cleaning fluid down the sink. 3 Throw away the empty cleaning cartridge. 4 Unpack the new cleaning cartridge and pull the seal off the cartridge. 5 Place the new cleaning cartridge in the SmartClean system.

21 ENGLISH 21 6 Push the top part of the SmartClean system back down ( click ). Cleaning the shaver under the tap Clean the shaver after every shave for optimal shaving performance. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 1 Switch off the shaver. 2 Rinse the shaving unit under a warm tap for some time. 3 Pull the shaving head holder off the bottom part of the shaving unit. 4 Rinse the shaving head holder under a warm tap for 30 seconds. 5 Carefully shake off excess water and let the shaving head holder dry. 6 Reattach the shaving head holder to the bottom part of the shaving unit ( click ).

22 22 ENGLISH Thorough cleaning method Make sure the appliance is switched off. 1 Pull the shaving head holder off the bottom part of the shaving unit. 2 Turn the retaining rings anticlockwise (1) and remove them (2). 3 Remove the shaving heads from the shaving head holder. Each shaving head consists of a cutter and guard. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally put a cutter in the wrong shaving guard, it may take several weeks before optimal shaving performance is restored. 4 Clean the cutter and guard under the tap. 5 After cleaning, place the cutter back into the guard.

23 ENGLISH 23 6 Put the shaving heads back into the shaving head holder. Note: Make sure the notches on both sides of the shaving heads fit exactly onto the projections in the shaving-head holder. 7 Place the retaining rings back onto the shaving head holder (1) and turn them clockwise (2). Note: Hold the shaving head holder in your hand when you reinsert the shaving heads and reattach the retaining rings. Do not place the shaving head holder on a surface when you do this, as this may cause damage. 8 Reattach the shaving head holder to the bottom part of the shaving unit. Cleaning the click-on attachments Cleaning the beard styler attachment (specific types only) Clean the beard styler attachment every time you have used it. 1 Pull the comb off the beard styler attachment. 2 Rinse the beard styler attachment and the comb separately under a hot tap for some time. 3 Carefully shake off excess water and let the beard styler attachment and comb dry. 4 Lubricate the teeth of the beard styler attachment with a drop of sewing machine oil every six months.

24 24 ENGLISH Cleaning the trimmer attachment (specific types only) Clean the trimmer attachment every time you have used it. 1 Switch on the appliance with the trimmer attachment attached. 2 Rinse the trimmer attachment under a hot tap for some time. 3 After cleaning, switch off the appliance. Tip: For optimal trimmer performance, lubricate the trimmer teeth with a drop of sewing machine oil every six months. 4 Carefully shake off excess water and let the trimmer attachment dry. Cleaning the cleansing brush attachment Clean the cleansing brush attachment every time you have used it. 1 Switch off the appliance. 2 Detach the brush head from the brush base. 3 Clean both parts thoroughly with hot water and soap. 4 Dry the cleansing brush attachment with a towel.

25 ENGLISH 25 Storage 1 Store the shaver in the pouch supplied. Note: We advise you to let the shaver dry before you store it in the pouch. 2 Put the protection cap on the cleansing brush to protect it from dirt accumulation. Replacement Replacing the shaving heads For maximum shaving performance, we advise you to replace the shaving heads every two years. Replacement reminder The shaving unit symbol will light up to indicate that the shaving heads need to be replaced. Replace damaged shaving heads right away. Only replace the shaving heads with original SH70 Philips shaving heads. 1 The shaving unit symbol lights up continuously when you switch off the shaver. 2 Pull the shaving head holder off the bottom part of the shaving unit.

26 26 ENGLISH 3 Turn the retaining rings anticlockwise (1) and remove them (2). 4 Remove the shaving heads from the shaving head holder and throw them away. 5 Place new shaving heads in the holder. Note: Make sure the notches on both sides of the shaving heads fit exactly onto the projections in the shaving-head holder. 6 Place the retaining rings back onto the shaving heads (1) and turn them clockwise (2). Note: Hold the shaving head holder in your hand when you reinsert the shaving heads and reattach the retaining rings. Do not place the shaving head holder on a surface when you do this, as this may cause damage. 7 Reattach the shaving head holder to the bottom part of the shaving unit. 8 To reset the shaver, press and hold the on/off button for approx. 7 seconds.

27 ENGLISH 27 Replacing the cleansing brush head The cleansing brush head attachment should be replaced every 3 months or earlier if the filaments are deformed or damaged. Ordering accessories To buy accessories or spare parts, visit or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). The following parts are available: HQ8505 adapter SH70 Philips shaving heads HQ110 Philips Shaving Head Cleaning Spray RQ111 Philips beard styler attachment RQ585 Philips cleansing brush attachment MS591 Philips cleansing brush head (sensitive) RQ560/RQ563 Philips cleansing brush heads (normal) JC302/JC305 cleaning cartridge Shaving heads We advise you to replace your shaving heads every two year. Always replace the shaving heads with original SH70 Philips shaving heads. Recycling Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help preserve the environment.

28 28 ENGLISH Removing the rechargeable shaver battery Only remove the rechargeable battery when you discard the shaver. Make sure the battery is completely empty when you remove it. Be careful, the battery strips are sharp. 1 Remove the screw in the backpanel with a screwdriver. Then remove the back panel. 2 Bend the hooks aside and remove the power unit. 3 Break the snap hooks and remove the front panel of the power unit. 4 Take out the battery holder and cut the battery tags with a pair of cutting pliers. Guarantee and support If you need information or support, please visit or read the separate worldwide guarantee leaflet.

29 Guarantee restrictions The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit for a list of frequently asked questions or contact the Consumer Care Centre in your country. Problem Possible cause Solution The shaver does not shave as well as it used to. The shaver does not work when I press the on/off button. The shaving heads are damaged or worn. Hairs or dirt obstruct the shaving heads. The shaver is still attached to the mains. For safety reasons, the shaver can only be used cordlessly. ENGLISH 29 Replace the shaving heads (see chapter Replacement ). Clean the shaving heads by following the steps of the extra-thorough cleaning method (see chapter Cleaning and maintenance ). Clean the shaver thoroughly before you continue shaving (see chapter Cleaning and maintenance ). Disconnect the shaver from the mains and press the on/ off button to switch on the shaver (see chapter The display, section Unplug for use reminder ).

30 30 ENGLISH Problem Possible cause Solution The shaver is not entirely clean after I clean it in the SmartClean system. The rechargeable battery is empty. The travel lock is activated. The shaving unit is soiled or damaged to such an extent that the motor cannot run. You have not placed the shaver in the SmartClean system properly, so there is no electrical connection between the SmartClean system and the shaver. The cleaning cartridge is empty. The replacement symbol flashes to indicate you have to replace the cleaning cartridge. You have used another cleaning fluid than the original Philips cleaning cartridge. Recharge the battery (see chapter Charging ). Press the on/off button for 3 seconds to deactivate the travel lock. Clean the shaving heads or replace them (see chapters Cleaning and maintenance and Replacement ). Press down the top cap ( click ) to ensure a proper connection between the shaver and the SmartClean system. Place a new cleaning cartridge in the SmartClean system (see chapter Cleaning and maintenance ). Only use the original Philips cleaning cartridges.

31 Problem Possible cause Solution Water is leaking from the bottom of the shaver. The SmartClean system does not work when I press the on/off button. The shaver is not fully charged after I charge it in the SmartClean system. I replaced the shaving heads, but the replacement reminder symbol is still showing. A shaving head symbol is suddenly showing on the display. During cleaning, water may collect between the inner body and the outer shell of the shaver. The SmartClean system is not connected to the mains. You have not placed the shaver in the SmartClean system properly. You have not reset the shaver. This symbol is a replacement reminder. ENGLISH 31 This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver. Put the small plug in SmartClean system and put the adapter in the wall socket. Make sure you press the shaver in the SmartClean system until it locks into place. Reset the shaver by pressing the on/off button for approx. 7 seconds (see chapter Replacement ). Replace the shaving heads (see chapter Replacement ).

32 32 简体中文 简介感谢您的惠顾, 欢迎光临飞利浦! 为了您能充分享受飞利浦提供的支持, 请在 上注册您的产品 请阅读本用户手册, 手册包含有关此剃须刀各种功能的信息以及一些使用技巧, 让您的剃须体验更轻松更舒适 基本说明 ( 图 1) 1 清洁刷附件保护盖 2 卡入式清洁刷附件 3 适用于胡须造型器附件的修剪梳 ( 仅限于特定型号 ) 4 卡入式胡须造型器附件 ( 仅限于特定型号 ) 5 卡入式修剪器附件 ( 仅限于特定型号 ) 6 卡入式剃须刀头部件 7 手柄 8 小插头的转换插座 9 电池充电指示灯 10 拔出插头即可使用 符号 11 旅行锁符号 12 更换提醒 13 清洗提示 14 适用于高效智能清洁系统的清洁滤芯 15 高效智能清洁系统 ( 仅限于特定型号 ) 16 高效智能清洁系统顶盖 17 开 / 关按钮 18 充电符号 19 准备就绪符号 20 更换符号 21 清洁符号 22 适配器 23 小插头 24 精美软袋

33 简体中文 33 注意事项使用本剃须刀和高效智能清洁系统之前, 请仔细阅读本重要信息 ( 仅限于特定型号 ) 妥善保管手册以供日后参考 危险 保持适配器干燥 警告符号注释: 禁止用在打开的水龙头下进行清洗 警告 电源适配器内含有一个变压器 切勿自行更换插头, 否则将导致严重后果 本产品不打算由肢体不健全 感觉或精神上有障碍或缺乏相关经验和知识的人 ( 包括儿童 ) 使用, 除非有负责他们安全的人对他们使用本产品进行监督或指导 请照看好儿童, 本产品不能用于玩耍 在自来水龙头下清洗剃须刀之前, 务必拔掉其电源插头 警告 切勿将高效智能清洁系统浸入水中, 也不要在水龙头下冲洗

34 34 简体中文 切勿使用温度高于 80 C 的热水冲洗剃须刀 如果剃须刀 高效智能清洁系统 适配器或任何其他部件损坏, 请勿再使用, 否则可能对人体造成伤害 务必用原始型号更换损坏的适配器或任何其他部件 高效智能清洁系统只能使用原装高效智能清洁清洁滤芯 高效智能清洁系统必须放在稳定 平坦的水平表面上, 以防漏液 当高效智能清洁系统准备就绪时, 切勿移动本产品, 以免清洁液漏出 使用高效智能清洁系统清洁剃须刀或充电前, 请始终确保乳液仓已关闭 高效智能清洁系统能彻底清洗您的剃须刀, 但不能消毒 ; 因此切勿与他人共用剃须刀 切勿使用压缩气体 钢丝绒 研磨性清洁剂或腐蚀性液体 ( 例如汽油或丙酮 ) 来清洁产品

35 简体中文 35 冲洗产品时, 水可能从剃须刀底部的插口漏出 这是正常的, 而且没有危险, 因为所有的电子线路都密封在剃须刀内的一个密封壳内 符合标准 此剃须刀可防水并符合国际认可的安全标准 它还可在沐浴或淋浴时使用, 也可以在水龙头下清洁 出于安全考虑, 剃须刀只能在不接电源的情况下使用 符号注释: 适合于在洗澡或淋浴时使用 允许在盛水的浴缸 淋浴 洗脸盆或其他器皿附近使用本器具 剃须刀和高效智能清洁系统符合所有有关暴露于电磁场的适用标准和法规 概述 本适配器配有自动电压选择器, 适合 100 至 240 伏范围内的电源电压 电源适配器可将 伏的电压转换为 24 伏以下的安全低电压

36 36 简体中文 显示屏充电 注意 : 本产品只能在不接电源的情况下使用 充电约需 1 小时 快速充电 : 当产品连接到电源时, 电池充电指示灯的指示灯将逐个持续亮起 当剃须刀包含的电量仍够剃须一次时, 电池充电指示灯的底灯将开始缓慢闪烁 如将产品连接至电源, 充电过程将继续 第一个底灯呈白色闪烁, 然后呈白色持续亮起, 表示产品正在充电 接着第二个指示灯闪烁, 然后持续亮起, 以此类推, 直到剃须刀充满电 电池已完全充满 注意 : 本产品只能在不接电源的情况下使用 注意 : 电池充满电后, 显示屏会在 30 分钟后自动关闭 充电期间按开 / 关按钮, 拔出插头即可使用 符号会呈白色闪烁, 提醒您需断开产品电源 电池充满电后, 所有电池充电指示灯都将呈白色持续亮起 电池电量不足 当电池的电量几乎耗尽时, 底部指示灯会呈橙色闪烁

37 电池剩余电量 简体中文 37 剩余的电池电量由持续亮起的充电指示灯来表示 清洗提示为获得更好剃须效果, 我们建议您每次使用之后都要清洁剃须刀 关闭剃须刀时, 清洗提示符号闪烁, 提醒您需要清洁剃须刀 旅行锁您可以在携带剃须刀旅行之前将其锁住 旅行锁可防止剃须刀被意外打开 启用旅行锁 1 按住开 / 关按钮 3 秒钟以进入旅行锁模式,, 激活旅行锁时, 旅行锁符号会呈白色持续亮起 激活旅行锁后, 旅行锁符号会闪烁 解除旅行锁 1 按开 / 关按钮 3 秒钟,, 旅行锁符号闪烁, 然后持续亮起 现在可以重新开始使用剃须刀

38 38 简体中文 更换剃须刀头为获得更好剃须效果, 建议每两年更换一次剃须刀头 本产品配有更换提醒, 它会提醒您更换剃须刀头 更换提醒指示灯会呈白色持续亮起 注意 : 更换剃须刀头后, 您需要通过按开 / 关按钮 7 秒来重置剃须刀 拔出插头即可使用 提醒 产品配有 拔出插头即可使用 提醒 拔出插头即可使用 符号呈白色闪烁, 提醒您需断开产品电源 充电充电约需 1 小时 剃须刀充满电后的剃须时间可长达 50 分钟 注意 : 本产品只能在不接电源的情况下使用 第一次使用剃须刀之前, 或当显示屏指示电池电量快要耗尽时, 请先为剃须刀充电 使用适配器充电 1 确保产品己关闭 2 将小插头插入本产品 (1), 然后将适配器插入电源插座 (2)

39 简体中文 39 在高效智能清洁系统中充电 ( 仅限于特定型号 ) 1 将小插头插入高效智能清洁系统 2 将电源适配器插入电源插座 3 按顶盖可将剃须刀放入支架 ( 可听到 咔哒 一声 ) 4 将剃须刀倒置放在支架上方 确保剃须刀的正面朝向高效智能清洁系统 5 将剃须刀放入支架 (1) 并向后倾斜 (2), 然后按下顶盖以连接剃须刀 ( 可听到 咔哒 一声 ) 注意 : 电池符号缓慢闪烁表示产品正在充电 使用剃须刀 剃须 皮肤适应期前几次剃须可能不会带给您预期效果, 并且您的皮肤可能会受到轻度刺激 这是正常的 您的皮肤和胡须需要时间适应新的剃须系统 建议您在 3 周时间内定期剃须 ( 至少每周 3 次 ), 以便让您的皮肤适应新的剃须刀 注意 : 本产品只能在不接电源的情况下使用

40 40 简体中文 1 按一下开 / 关按钮以启动剃须刀,, 显示屏将亮起几秒钟的时间 2 将剃须刀头在您的皮肤上作迂回运动 注意 : 请勿作直线运动 3 按一下开 / 关按钮关闭剃须刀电源,, 显示屏将亮起几秒钟时间, 以显示电池剩余电量 湿剃您也可以先用剃须泡沫或剃须啫喱将脸弄湿, 然后再用此剃须刀进行剃须 要用剃须泡沫或剃须啫喱剃须, 请按照下面的步骤执行操作 : 1 用水润湿一下皮肤 2 在皮肤上涂上剃须泡沫或剃须啫喱 3 在水龙头上冲洗一下剃须刀头部件, 确保剃须刀头部件可以在您的皮肤上顺畅滑动 4 按一下开 / 关按钮以启动剃须刀 5 将剃须刀头在您的皮肤上作迂回运动 注意 : 在水龙头下定期冲洗剃须刀, 确保其能够继续在您的皮肤上顺畅滑动 6 使用后, 擦干您的脸并彻底清洁剃须刀 ( 见 清洁和保养 一章 ) 注意 : 确保冲洗干净剃须刀上的泡沫或剃须啫喱

41 简体中文 41 使用卡入式附件 使用胡须造型器附件 ( 仅限于特定型号 ) 1 确保产品己关闭 2 将剃须刀头部件竖直抽离产品 注意 : 将剃须刀头部件从产品上拉下时, 不要旋转 3 将胡须造型器附件的凸缘插入产品顶部的槽内 然后按下胡须造型器附件以将其安装在产品上 ( 可听到 咔哒 一声 ) 使用带修剪梳的胡须造型器附件您可以使用带修剪梳的胡须造型器附件以固定设置 ( 也可使用不同的长度设置 ) 修整胡须 胡须造型器附件的须发长度设置对应修剪后剩余的须发长度, 范围为 1 到 5 毫米 1 将修剪梳直接滑入胡须造型器附件两侧的导槽中 ( 可听到 咔哒 一声 ) 2 按下长度选择器, 然后将其向左或向右推动以选择所需的须发长度设置 3 按一下开 / 关按钮打开产品 4 您现在可以开始修整胡须 使用不带修剪梳的胡须造型器附件您可以使用不带修剪梳的胡须造型器附件修整胡须 须髭 鬓角或颈部的轮廓 1 将修剪梳抽离胡须造型器附件

42 42 简体中文 注意 : 抓住修剪梳的中心位置, 将其抽离胡须造型器附件 请勿拉拔修剪梳的侧面 2 按一下开 / 关按钮打开产品 3 您现在可以开始修整胡须 须髭 鬓角或颈部 使用修剪器附件 ( 仅限于特定型号 ) 您可使用修剪器附件修剪鬓角和须髭 1 确保产品己关闭 2 将剃须刀头部件竖直抽离产品 注意 : 将剃须刀头部件从产品上拉下时, 不要旋转 3 将修剪器附件的凸缘插入产品顶部的槽内 然后按下修剪器附件以将其安装在剃须刀上 ( 可听到 咔哒 一声 ) 4 按一下开 / 关按钮打开产品 5 现在可以开始修剪了 使用清洁刷附件将旋转清洁刷附件与日常洁面产品一起使用 清洁刷附件可去除油脂和污垢, 焕发健康无油脂的肌肤

43 简体中文 43 1 将剃须刀头部件竖直抽离产品 将剃须刀头部件从产品上拉下时, 不要旋转 2 将清洁刷附件的凸缘插入产品顶部的槽内 然后按下清洁刷附件以将其安装在产品上 ( 可听到 咔哒 一声 ) 3 用温水润湿清洁刷附件, 并用洁面霜润湿您的面部 提示 : 剃须之前使用清洁刷附件进行清洁, 便于轻松剃除毛发, 带来更卫生的剃须效果 4 按开 / 关按钮启动产品 5 先用清洁刷附件清洁 T 区 注意 : 在同一位置作圆周运动不要超过 3 次 6 开始清洁面部的其他部位 提示 : 使用清洁刷附件清洁面部大约 1 分钟 警告 : 切勿清洁眼部周围的敏感区域

44 44 简体中文 清洁和保养在高效智能清洁系统中清洁剃须刀 ( 仅限于特定型号 ) 切勿倾斜高效智能清洁系统, 以防溢漏 注意 : 在准备使用高效智能清洁系统时用手握住 高效智能清洁系统使用准备 1 将小插头插入高效智能清洁系统的背面 2 将电源适配器插入电源插座 3 按高效智能清洁系统侧面上的按钮 (1), 然后提起高效智能清洁系统的顶部 (2) 4 将密封圈从清洁滤芯上拔下 5 将清洁滤芯放置在高效智能清洁系统中 6 将高效智能清洁系统的顶部向下推回去 ( 可听到 咔哒 一声 )

45 简体中文 45 使用高效智能清洁系统将剃须刀放入高效智能清洁系统之前, 务必确保甩掉剃须刀上多余的水份 1 按顶盖可将剃须刀放入支架 ( 可听到 咔哒 一声 ) 2 将剃须刀倒置放在支架上方 确保剃须刀的正面朝向高效智能清洁系统 3 将剃须刀放入支架 (1) 并向后倾斜 (2), 然后按下顶盖以连接剃须刀 ( 可听到 咔哒 一声 ),, 电池符号将开始闪烁 4 按高效智能清洁系统上的开 / 关按钮以启动清洁程序,, 开 / 关按钮和清洁符号均持续亮起 注意 : 冲洗阶段大约需要 10 分钟

46 46 简体中文,, 清洁程序完成后, 准备就绪符号会持续亮起,, 电池符号持续亮起, 表示剃须刀已充满电 此过程需要大约 1 个小时 注意 : 如果在清洁程序运行期间按下高效智能清洁系统的开 / 关按钮, 则程序将中断 此时, 清洗符号将停止闪烁 注意 : 如果在清洁程序运行期间将适配器从插座中拔出, 则程序将中断 注意 : 在执行清洁程序和充电完成 30 分钟后, 高效智能清洁系统将自动关闭 更换高效智能清洁系统的滤芯 当更换提醒呈橙色闪烁时, 或当您对效果不再满意时, 请更换清洁滤芯 1 按高效智能清洁系统侧面上的按钮 (1), 然后提起高效智能清洁系统的顶部 (2) 2 从高效智能清洁系统中取出空的清洁滤芯, 然后将清洁滤芯中残余的清洁剂倒出 您只需将清洁剂倒入水槽 3 丢弃空的清洁滤芯 4 拆开新清洁滤芯的包装, 然后将密封圈从滤芯上拔下 5 将新的清洁滤芯放置在高效智能清洁系统中 6 将高效智能清洁系统的顶部向下推回去 ( 可听到 咔哒 一声 )

47 简体中文 47 在水龙头下冲洗剃须刀每次剃须后清洁剃须刀, 以获得更好的剃须性能 使用热水时一定要小心 切记先检查水温是否太高, 以防烫手 不要用毛巾或纸巾擦拭剃须刀头部件, 因为这样可能会损坏剃须刀头 1 关闭剃须刀 2 在热水龙头下冲洗剃须刀头部件片刻 3 将剃须刀头支架从剃须刀头部件的底部抽离 4 将剃须刀头支架在热水龙头下冲洗 30 秒 5 小心甩干多余的水, 然后使剃须刀头支架干燥 6 将剃须刀头支架重新装回剃须刀头部件的底部 ( 可听到 咔哒 一声 ) 彻底清洁方法 确保产品电源已关闭 1 将剃须刀头支架从剃须刀头部件的底部抽离

48 48 简体中文 2 逆时针 (1) 旋转固定环, 并将其取下 (2) 3 从剃须刀头支架上卸下剃须刀头 每个剃须刀头都包括刀片和网罩 注意 : 不要同时清洁多组刀片和网罩, 因为它们都是相互匹配的 如果不小心将刀片装到了错误的网罩上, 则需要数周时间才能恢复产品的最佳剃须性能 4 在水龙头下清洁刀片和网罩 5 清洁后, 将刀片放回网罩中 6 将剃须刀头装回到剃须刀头支架中 注意 : 确保剃须刀头两侧的槽口正好卡入剃须刀头支架上的凸起部位

49 简体中文 49 7 将固定环放回剃须刀头支架 (1) 并将其顺时针旋转 (2) 注意 : 当您重新插入剃须刀头并重新安装固定环时, 请将剃须刀头支架握在手中 当您执行此操作时, 切勿将剃须刀头支架放在平面上, 否则可能会造成损坏 8 将剃须刀头支架重新装回剃须刀头部件的底部 清洁卡入式附件 清洁胡须造型器附件 ( 仅限于特定型号 ) 每次使用后, 请清洁胡须造型器附件 1 将修剪梳抽离胡须造型器附件 2 在热水龙头下单独冲洗胡须造型器附件和修剪梳片刻 3 小心地甩干多余的水, 然后使胡须造型器附件和修剪梳干燥 4 每 6 个月用一滴缝纫机油润滑一次胡须造型器附件的齿 清洁修剪器附件 ( 仅限于特定型号 ) 每次使用后都要清洁修剪器附件 1 打开装有修剪器附件的产品 2 在热水龙头下冲洗修剪器附件片刻 3 清洁完成后, 关闭产品 提示 : 为获得最佳修剪器性能, 每六个月用一滴缝纫机油润滑修发器齿

50 50 简体中文 4 小心地甩干多余的水, 然后使修剪器附件干燥 清洗清洁刷附件每次使用后都要清洗清洁刷附件 1 关闭产品 2 从毛刷基座上卸下刷头 3 用热水和肥皂彻底清洁两个部件 4 用毛巾擦干清洁刷附件 存储 1 将剃须刀存放在随附的软袋中 注意 : 我们建议您先使剃须刀干燥, 然后再将其存放在软袋中 2 将保护盖放在清洁刷上, 以防产品积聚灰尘

51 简体中文 51 更换更换剃须刀头为获得更好剃须效果, 建议每两年更换一次剃须刀头 更换提醒剃须刀头部件符号会亮起, 指示需要更换剃须刀头 应立即更换损坏的剃须刀头 只能用原装 SH70 飞利浦剃须刀头进行更换 1 关闭剃须刀后, 剃毛刀头部件符号会持续亮起 2 将剃须刀头支架从剃须刀头部件的底部抽离 3 逆时针 (1) 旋转固定环, 并将其取下 (2) 4 将剃须刀头从剃须刀头支架上卸下并丢弃 5 将新的剃须刀头放在支架中 注意 : 确保剃须刀头两侧的槽口正好卡入剃须刀头支架上的凸起部位

52 52 简体中文 6 将固定环放回剃须刀头 (1) 并将其顺时针旋转 (2) 注意 : 当您重新插入剃须刀头并重新安装固定环时, 请将剃须刀头支架握在手中 当您执行此操作时, 切勿将剃须刀头支架放在平面上, 否则可能会造成损坏 7 将剃须刀头支架重新安装到剃须刀头部件的底部 8 要重置剃须刀, 请按住开 / 关按钮约 7 秒钟 更换清洁刷头应每 3 个月更换一次清洁刷头附件, 或当刷毛在更短时间内出现变形或损坏时更换 订购附件要购买附件和备件, 请访问 service 或请联系飞利浦经销商 您也可以联系您所在国家 / 地区的飞利浦客户服务中心 ( 联系详情, 请参阅全球保修卡 ) 可选配以下附件 : HQ8505 适配器 SH70 飞利浦剃须刀头 HQ110 飞利浦剃须刀头清洁喷雾剂 RQ111 飞利浦胡须造型器附件 RQ585 飞利浦清洁刷附件

53 MS591 飞利浦清洁刷头 ( 敏感肌肤 ) RQ560/RQ563 飞利浦清洁刷头 ( 普通肌肤 ) JC302/JC305 清洁滤芯 剃须刀头 建议您每两年更换一次剃须刀头 务必使用原装 SH70 飞利浦剃须刀头进行更换 回收弃置产品时, 请不要将其与一般生活垃圾扔在一起, 应将其交给指定的回收中心, 这样做有利于环保 卸下剃须刀的充电电池 只有在丢弃剃须刀时才可取下充电电池 请确保在取下电池时电量已完全耗尽 注意, 电池带非常锋利 1 用螺丝刀卸下背板中的螺钉 然后卸下背板 2 将钩子向外掰, 取出电源部件 简体中文 53 3 脱开安全钩, 取下电源部件的前面板

54 54 简体中文 4 取出电池舱, 用一把钢丝钳剪下电池标签 保修和支持 如果您需要信息或支持, 请访问 support 或阅读单独的全球保修卡 保修条款由于剃须刀头 ( 刀片和网罩 ) 属于易磨损物品, 因此不在国际保修条款的涵盖范围之列 故障种类和处理方法本章归纳了使用本产品时最常见的一些问题 如果您无法根据以下信息解决问题, 请访问 查阅常见问题列表, 或联系您所在国家 / 地区的客户服务中心 问题可能的原因解决方法 剃须刀的剃须效果没有以前好 剃须刀头已损坏或磨损 毛发或污垢堵塞了剃须刀头 更换剃须刀头 ( 见 更换 一章 ) 通过执行下列彻底清洁方法中的步骤来清洁剃须刀头 ( 见 清洁和保养 一章 ) 在继续剃须前彻底清洁剃须刀 ( 见 清洁和保养 一章 )

55 问题可能的原因解决方法 按下开 / 关钮时, 剃须刀不工作 剃须刀放在高效智能清洁系统中清洁之后依然没有完全干净 水从剃须刀底部漏出 剃须刀仍连接到电源 出于安全考虑, 剃须刀只能在不接电源的情况下使用 充电电池的电量已耗尽 旅行锁已被激活 剃须刀头部件被污染或损坏, 导致马达无法运行 您未将剃须刀正确插接到高效智能清洁系统, 因此高效智能清洁系统和剃须刀之间未通电 清洁滤芯是空的 更换符号闪烁表示您必须更换清洁滤芯 您使用了其他清洁剂, 而不是原装飞利浦清洁滤芯 在清洁过程中, 水可能聚集在剃须刀的机身内部与外壳之间 简体中文 55 断开剃须刀的电源, 按开 / 关按钮打开剃须刀 ( 请参阅 显示屏 一章中的 拔出插头即可使用提醒 部分 ) 给电池充电 ( 见 充电 一章 ) 按住开 / 关按钮 3 秒钟以禁用旅行锁 清洁剃须刀头或进行更换 ( 见 清洁和保养 及 更换 章节 ) 按下顶盖 ( 可听到 咔哒 一声 ) 以确保剃须刀和高效智能清洁系统之间的连接正确 将新的清洁滤芯放置在高效智能清洁系统中 ( 见 清洁和保养 一章 ) 只能使用飞利浦原装清洁滤芯 这是正常的, 没有危险, 因为所有电子元件都封闭在剃须刀内部的密封电源部件中

56 56 简体中文 问题可能的原因解决方法 按下开 / 关按钮时, 高效智能清洁系统不工作 剃须刀在高效智能清洁系统中无法充满电 我更换了剃须刀头, 但仍然显示更换提醒符号 显示屏上突然显示剃须刀头符号 高效智能清洁系统未连接电源 您未将剃须刀正确插接到高效智能清洁系统 您尚未重置剃须刀 此符号是更换提醒 将小插头插入高效智能清洁系统, 然后将适配器插入电源插座 确保将剃须刀按入高效智能清洁系统, 直至其锁定到位 按住开 / 关按钮大约 7 秒钟以重置剃须刀 ( 见 更换 一章 ) 更换剃须刀头 ( 见 更换 一章 )

57 简体中文 57 保留备用 30/10/2014

58