Size: px
Start display at page:

Download ""

Transcription

1 TOKYO SOKUTEIKIZAI CO., LTD. Rotary Switch RS300 P. 5 RS400 P. 5 RS500 P. 5 MR8A P. 7 Code Switch DP P.11 MR8C P.15 Rotary Encoder RE29 P.19 RE25 P.21 RE24 P.23 RE23 P.25 Manual Pulse Generator RE45T P.29 RE45B P.31 RE46 P.33 RE47 P.35 Handy Manual Pulse Generator HT P.39 HC1 P.43 HM P.49 HR P.53 HS P.57 Trackball TB36 P.61

2

3

4

5 Rotary Switches RS300/400/500 Series Outline Our RS series embody the manufacturing history of our company. All series are sturdy and solid with high dependability designed for control units of plants, installations,audio equipments, etc. Free to change the number of switch positions by replacing self-tapping screws Various combinations of double shafted model available RoHS compliant Specifications RS300 RS400 RS500 Step Angles 15/20/30/60 30/60 15/20/30/45/60 Switching Mechanism 15/20: Shorting 30/60: Non-shorting Shorting and Non-shorting selectable 15/20: Shorting 30/45/60: Non-shorting Water Proofing Adapter panel and rubber o-rings provided at requests Gold Contacts High-Voltage Withstanding Available (Up to 6,000V) Available Operating Temperature Storage Temperature -40 +C Rotational Torque 0.12N m ~ 0.35N m 0.10N m ~ 0.25N m Terminal Strength Nut Tightening Torque Vibration Resistance 10N 2N m 10Hz ~ 55Hz ~ 10Hz/min (vibrated for 1.5mm to each XYZ direction) No defect found under conditions above Heat Resistance of Solder 350±10, 3 seconds ±1 Contact Resistance Insulation Resistance (1kHz±200Hz of voltage 20mV. 50mA or less) 5mΩ max. 15mΩ max. 10mΩ max. After 1 min. of 500VDC terminal-terminal 1,000MΩ terminal-ground 50,000MΩ Withstanding Voltage 1,000VAC 1min. 500VAC 1min. Rated Value Durability Features AC 30V 3.0A/200V 0.5A 30V 1.0A/200V 0.2A 30V 1.5A/200V 0.2A DC 20V 3.0A/200V 0.2A 20V 1.0A/200V 0.1A 20V 1.5A/200V 0.1A at least 50,000 strokes Part Number Designation RS 500 N A P R G Switch Model Material Used Length of the RS300,RS400,RS500 P: Phenol shaft (mm) E: Epoxy 16, 20 Mounting N: Nut-locked at center Step Angle P: Waterproof V: Fastened with 2 screws 15, 20, 30, 60 (RS300) 30, 60 (RS400) Decks 15, 20, 30, 45, 60 (RS500) Total Poles Shape of the shaft Positions R: Round Whirl Stop L: Endless None: With whirl stop Contact Type A: Non-shorting B: Shorting Gold contact * Optional

6 RS300_Dimensions (mm) RS400_Dimensions (mm) RS500_Dimensions (mm)

7 Ultra Compact Rotary Switch MR8A Series Outline MR8A is our tiniest rotary switch designed for compact devices, used for many different equipments which has very limited space inside. Features 8mm square compact (8.0x8.0 mm) Gold plated contacts Monolithic sealed structure of the terminals to prevent entry of a soldering flux RoHS compliant Waterproofed model available Specifications Operating temperature Storage temperature Mechanical Specification Electrical Specification Rotational Torque Terminal Strength Rotation Stopper Strength Panel Nut Tightening Torque Heat Resistance of Solder Water Resistance Contact Capacity Maximum Voltage Working Electric Current Contact Resistance -20 ~ +70-4F ~ 158F Keep the body -40 ~ +70 unfrozen -40F ~ 158F 0.02±0.01N m 3N (of static load applied to the tip of the terminal once and in any direction) 0.4N m 0.8N m 300 ±10, 3±1 sec. Water resistant through the mounted panel (2m deep in the water for 2h) 0.4VA (AC&DC) 25V (AC&DC) 0.1mA ~ 50mA (AC&DC) 80mΩ max. Electrical Specification Warranty Insulation Resistance Withstanding Voltage Insulation Resistance 1 year from the date of shipment. 500MΩmin. (250VDC): Between terminals 1000MΩmin. (500VDC): Between Terminals and Ground 300VAC 1min.: Between terminals 300VAC 1min.: Between terminals and ground DC100V (1min later) DC500V (1minLater) terminal terminal terminal ground Weight 5.5g Durability Humidity Proof 100MΩ 500MΩ 50,000 strokes (Rotational Torque: ±20% the initial value, Contact Resistance: Not more than 100mΩ, Insulation Resistance: After 1min 250VDC electrification) Temperature : +40 ± 2 Relative Humidity : 90 ~ 95% (Duration : 48 ± 2h)

8 Part Number Designation Dimensions (mm) Standard MR8A_ With Support MR8A_S With Seal Washer (Front panel seal) MR8A_P PWB Mounting Hole Dimensions (mm) Standard / With Seal Washer Seal Washer (2 pcs) Mounting Hole Dimension (mm) Standard / With Seal Washer Use 2 seal washers With Support (& Seal Washer) Accessories Nut Washer Seal Washer (1 pc) With Support & Seal Washer (Front panel seal) MR8A_SP With Support (& Seal Washer) Seal Washer (2 pcs) Use 2 seal washers

9

10

11 Digital Code Switch DP Series Outline DP the market leading digital code switch series are designed for use in wide range of industrial instruments. Features High reliability with double gold-plated sliding contacts. Eco friendly: 1) Low cost and lesser parts by VA design 2) RoHS compliant Step angles: 13.85, 15, 20, 27.69, 30 Various types of codes: real binary, complementary binary, real gray, complementary gray (either inhibit and/or parity circuit enclosed in all codes for safety). Special codes also available. Duration of over switching cycles Waterproofed model available Specifications Items Operating temperature Storage temperature -20 ~ +70 (-4F ~ 158F) -40 ~ +70 (-40F ~ 158F) Rated Value Rotational torque 0.1N ~ 0.2N Terminal strength Panel nut tightening torque Stopper strength Vibration Durability Contact resistance 3N 2N m 3N m Keep the body unfrozen Range 10 ~ 55 ~ 10Hz/min No defect found after 2h of vibration stroke for 1.5mm to each XYZ direction 100mΩ Insulation resistance Withstanding voltage Load resistance Durability Warranty DC250V/ After 1min DC500V/ After1min AC250/1min AC1500V/1min Terminal to terminal Terminal to groung 500MΩ 5000MΩ Terminal to terminal Terminal to ground AC 5V 0.5A/ 48V 0.05A DC 5V 0.25A/ 25V 0.05A Rotational Contact resistance Insulation resistance 1 year from the date of shipment Over times rotations 150mΩ DC250V/50mΩ,(Over a min)

12 Part Number Designation DP P J 20 R CB Switch Model N: Non Waterproof P: Waterproof Codes 01: Real Binary 02: Complimentary Binary 03: Real Gray 04: Complimentary Gray Starting Position End Position Step Angle Connector Options None: No Connector Attached H: CB: Vertically Attached J: 15 CS: Horizontally Attached N: 30 Length of the Shaft L: 20 16: 16mm Shape of the Shaft S: : 20mm R: Round Step Angle Range of the Staring/End Positions H ~ 25 J 15 0 ~ 23 N 30 0 ~ 11 L 20 0 ~ 17 S ~ 12 Dimensions (mm) DPN/DPP DPN/DPP with Connector CB DPN/DPP with Connector CS Adapter(for waterproof) Wire Harness DP Accessor y Precautions How to connect panel 1. Peer double-sided tape off. 2. Stick double-sided tape to the panel (Pay attention to direction of adapter) 3. Use M9nut, toothed lock washer and washer to tighten panel and adapter. 4. M9 nut tightening torque shall be up to 2N.m. 5. Use double-sided tape under clean condition. PLEASE NOTE 1. Panel thickness shall be up to 2mm(to use adapter) 2. Panel thickness shall be up to 4mm(without adapter) Mounting hole dimensions 1. Make φ9.2 dimensions hole at the panel(to use adapter) 2. Check out left example to use without adapter

13

14

15 Ultra Compact Code Switch MR8C Series Outline MR8C is an ultra compact rotary code switch with resin enclosure designed especially for but not limited to - usage in devices with limited space for switch units inside. Features 8mm square compact (8.0x8.0 mm) Two different step angles; (22.5,30) Gold plated contacts Monolithic sealed structure of the terminals to prevent entry of a soldering flux RoHS compliant Dripproofed model available Specifications Operating temperature Storage temperature Mechanical Specification Electrical Specification Rotational Torque Terminal Strength Rotation Stopper Strength Panel Nut Tightening Torque Heat Resistance of Solder Water Resistance Contact Capacity Maximum Voltage Working Electric Current Contact Resistance -20 ~ +70-4F ~ 158F Keep the body -40 ~ +70 unfrozen -40F ~ 158F 0.02±0.01N m 5N (of static load applied to the tip of the terminal once and in any direction) 0.4N m 0.6N m 350 ±10, 3±1 sec. Water resistant through the mounted panel (1m deep in the water for 2h) 0.2VA (AC&DC) 15V (AC&DC) 0.1mA ~ 20mA (AC&DC) 200mΩ max. Electrical Specification Insulation Resistance Withstanding Voltage 100MΩminimum (100VDC 1min.): Between terminals 500MΩminimum (500VDC 1min.): Between Terminals and Ground 100VAC 1min.: Between terminals 500VAC 1min.: Between terminals and ground Weight 3.5g Durability Humidity Proof Warranty 1 year from the date of shipment 30,000 strokes (Rotational Torque: ±50% the initial value, Contact Resistance: Not more than 1Ω, Insulation Resistance: After 1min 100VDC electrification) Temperature : +40 ± 2 Relative Humidity : 90 ~ 95% (Duration : 48 ± 2h)

16 Part Number Designation Dimensions (mm) Standard MR8C_ With Support MR8C_S With Seal Washer (Front panel seal) MR8C_P Standard / With Seal Washer PWB Mounting Hole Dimensions (mm) Mounting Hole Dimension (mm) Standard / With Seal Washer With Suppoet (+ Seal Washer) With Suppoet (+ Seal Washer) With Support & Seal Washer (Front panel seal) MR8C_SP Code table

17

18

19 Ultra Slimline Rotary Encoder with Push Switch RE29 Series Outline RE29 series pack compact rotary encoder with dual-functional resin shaft into the space-saving resin enclosure. RE29 is recommended for wide range of machines including measurement components, medical and telecommunication devices. Extremely thin (6.6mm) and lightweight (7g) Features Multi-functional with 2 way acting push switch function and rotating function shaft Eco friendly: 1) Low cost and lesser parts by VA design 2) RoHS compliant Designed to be soldered to printed circuit board Specifications 1. Electrical and Mechanical specifications Rotary Encoder Push switch Items Number of Pulses Number of Clicks Supply Voltage Output Signals Output Voltage Response Frequency Rotational Torque High Rating of contact Travel of switch Operational Force Weight Rated Value 6 PPR 24 Clicks DC3.3V ± 5% 20mA 6mA TYP DC5V ± 5% 10mA 4mA TYP Channel A/B: Square Wave CMOS chip (Supply Voltage - 2.5V) Low 0.5V 100Hz 4 ± 2 mn m DC12V 0.1 ~ 10mA Resistance load 0.2 ± 0.1 mm 5 ± 2 N 7g ( ) 2. Reliability and Environmental Specifications Durability of operating area Items Thrust direction Radial Rotational durability Screw Torque Heat resistance of solder Operating temperature Storage temperature Push Pull Solder bit temp.: MAX 350 Output Waveform Rated Value 100N 50N 1N m 1 million strokes (No load) Not more than 1N m Within 3 seconds for each terminal -0 32F ~ F F ~ F 1) Turning the shaft clockwise will generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise will generate the signal A when the signal B outputs a high voltage(1); 3) Either signal A or B switches from 01 or 10 for every single click (Quad edge evaluation spec).

20 Part Number Designation RE29 N F 6 S H 8 R B Series Non Waterproof 6 pulses Push switch operational force : 5N Power Voltage A 5V B 3.3V Front Attach Rotational Torque : 4mN m Rouond shaft Supply 8 ; 8mm 12 ; 12mm Dimensions (mm) PWB mounting hole dimensions (mm) 5V Circuitr y 3.3V Precautions Wiring Soldering Operation Power Use buffering amplifier when extending lead wire over 30cm. Do not put a load on the terminal area during and immediately after soldering. Do not use flow/reflow soldering machines. Use under specified power voltage and connect properly. Warranty 1 year from the date of shipment

21 Optical Rotary Encoder RE25 Series Outline RE25 is a VA designed eco friendly power-saving and low cost with lesser parts rotary encoder. Its size, mounting procedures and inner-structures have been designed for a wide-array of uses; measurement devices, medical equipments, industrial machineries, telecommunication devices and machine tools. Features Eco friendly: 1) Power-saving 2) Low cost and lesser parts by VA design 3) RoHS compliant Thin-line (18.8x25.5x8.9mm) and lightweight (18g) Various types of models with options: lead wire with or without connector, clamp for horizontal/vertical mounting Long-lasting without contact chatter due to its optical switching function Waterproofed model available Specifications 1. Electrical and Mechanical specifications Items Number of pulses Supply voltage Output signals Output voltage High Response frequency Rotational Torque Weight Light: S Standard: C Medium: M High: H 3.3V±10% 20mA Rated Value 16PPR, 25PPR 5V±10% 10mA Channel A/B: Square Wave CMOS chip Supply Voltage(3.3V): - 0.3V, (5V): - 0.5V Low 0.4V 200Hz 4±1mN m 6±2mN m 10.5±3.5mN m 16±5mN m 18g 2. Reliability and Environmental specifications Durability of operating area Rotational durability Screw Torque Heat resistance of solder Items Thrust direction Operating temperature Storage temperature Radial Light: S Push Pull Standard: C Medium: M High: H Solder bit temp.: MAX 350 Rated Value 100N 50N 1N m 1 million strokes (No load) 100 thousand strokes (No load) Not more than 1N m Within 3 seconds for each terminal 0 32F ~ F F ~ F Output Waveform 1) Turning the shaft clockwise will generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise will generate the signal A when the signal B outputs a high voltage(1); 3) Detent positions are where both signal A and B are low (0).

22 Part Number Designation RE25 N S 25 C 20 R A Series N P S C F V Waterproof No Yes Wiring Standard With wire Front Mount Vortical Mount Pulse 16 16PPR 25 25PPR Ckick Rotation Torque S 4mN m C 6mN m With M 10.5mN m H 16mN m Non W/O 4mN m Power Voltage A 5V B 3.3V R Shaft Shape Round Shaft length 16 16mm 20 20mm Dimensions (mm) RE25NSRE25PS RE25NF (front mount) RE25NC RE25PC(with wire) RE25NVRE25PV (vertical mount) Circuitr y RE25 5V RE25 3.3V Terminal number Mounting hole dimensions (mm) PWB mounting hole dimensions (mm) Precautions Wiring Soldering Operation Power Waterproofing Use buffering amplifier when extending lead wire over 30cm. Do not put a load on the terminal area during and immediately after soldering. Do not use flow/reflow soldering machines. Use under specified power voltage and connect properly. Do not fasten tighter with the torque of more than 1.5N m. RE25NF Warranty RE25_V 1 year from the date of shipment.

23 Rotary Encoder with Dual Functional Shaft RE24 Series Outline RE24 rotary encoder series contain unique mechanism for its shaft; its rotational outer axis for rotary encoder and the inner axis for push switch. RE24 is designed for use in various industrial areas: measurement component, medical equipment, industrial machinery, telecommunication device and machine tool. Features Dual inner/outer axes mechanism to help prevent misoperation Eco friendly: 1) Low cost and lesser parts by VA design 2) RoHS compliant Thin-line (18.8x25.5x8.9mm) and lightweight (18g) Long-lasting without contact chatter due to its optical switching function Specially designed knob (GG60) available Specifications 1. Electrical and Mechanical specifications Items Number of pulses Supply voltage Output signals Output voltage High Response frequency Rotational torque Push switch Light: S Standard: C Medium: M High: H Rating of contact Travel of switch Operational Force 3.3V±10% 20mA Rated Value 16PPR, 25PPR 5V±10% 10mA two square wave output (A/B), CMOS chip (Supply Voltage - 0.5V) Low 0.5V S M H 200Hz 4±1mN m 6±2mN m 10.5±3.5mN m DC12V 16±5mN m 0.2±0.1mm 3.2±1N 4.0±1N 5.0±1N 0.1 ~ 10mA Weight 18g Note : In case Rotational Torque M or H, Operational Torque should be either M or H. 2. Reliability and Environmental specifications Durability of operating area Rotational durability Screw Torque Heat resistance of solder Items Thrust direction Operating temperature Storage temperature Radial Light: S Push Pull Standard: C Medium: M High: H Solder bit temp.: MAX 350 Output Waveform Rated Value 100N 50N 1N m 1 million strokes (No load) 100 thousand strokes (No load) Not more than 1N m Within 3 seconds for each terminal 0 32F ~ F F ~ F 1) Turning the shaft clockwise will generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise will generate the signal A when the signal B outputs a high voltage(1); 3) Detent positions are where both signal A and B are low (0).

24 Part Number Designation RE24 N S 25 C S 16/24 R A Series N S C F V Waterproof No Wiring Standard With Code Front Mount Vortical Mount Pulse 16 16PPR 25 25PPR Ckick Rotation Torque S 4mN m C 6mN m With M 10.5mN m H 16mN m Non W/O 4mN m Push Switch Force S 3.2N H 5N Power Voltage A 5V B 3.3V F Shaft Shape Flat Shaft length 16 16mm (inner) 20 24mm (outer) Dimensions (mm) RE24NS RE24NF (front mount) PWB mounting hole dimensions (mm) RE24NF (front mount) RE24NV (vertical mount) Circuitr y RE24 5V RE24 3.3V Terminal number Mounting hole dimensions (mm) Precautions Wiring Soldering Operation Power Waterproofing Use buffering amplifier when extending lead wire over 30cm. Do not put a load on the terminal area during and immediately after soldering. Do not use flow/reflow soldering machines. Use under specified power voltage and connect properly. Do not fasten tighter with the torque of more than 1.5N m. Warranty RE24NF RE24NV 1 year from the date of shipment

25 Optical Rotary Encoder with Push Switch RE23 Series Outline RE23 series are optical rotary encoders with dual functions of pushing and rotating on its shaft. Its size, mounting procedures and inner-structures have been designed for a wide-array of uses; measurement devices, medical equipments, industrial machineries, telecommunication devices and machine tools. Features Multi-functional with 2 way acting pushing and rotating shaft Eco friendly: 1) Low cost and lesser parts by VA design 2) RoHS compliant Thin-line (18.8x25.5x8.9mm) and lightweight (18g) Various types of models with options: lead wire with or without connector, clamp for horizontal/vertical mounting Long-lasting without contact chatter due to its optical switching function Specifications 1. Electrical and Mechanical specifications Items Number of pulses Supply voltage Output signals Output voltage High Response frequency Rotational torque Push switch Light: S Standard: C Medium: M High: H Rating of contact Travel of switch Operational Force Weight 3.3V±10% 20mA Rated Value 16PPR, 25PPR 5V±10% 10mA Channel A/B: Square Wave CMOS chip (Supply Voltage - 0.5V) Low 0.5V S M H 200Hz 4±1mN m 6±2mN m 10.5±3.5mN m DC12V 16±5mN m 0.2±0.1mm 3.2±1N 4.0±1N 5.0±1N 18g 0.1 ~ 10mA Note : In case Rotational Torque M or H, Operational Torque should be either M or H. 2. Reliability and Environmental specifications Durability of operating area Rotational durability Screw Torque Heat resistance of solder Items Thrust direction Operating temperature Storage temperature Radial Light: S Push Pull Standard: C Medium: M High: H Solder bit temp.: MAX 350 Output Waveform Rated Value 100N 50N 1N m 1 million strokes (No load) 100 thousand strokes (No load) Not more than 1N m Within 3 seconds for each terminal 0 32F ~ F F ~ F 1) Turning the shaft clockwise will generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise will generate the signal A when the signal B outputs a high voltage(1); 3) Detent positions are where both signal A and B are low (0).

26 Part Number Designation RE23 N S 25 C S 20 R A Series N S C F V Waterproof No Wiring Standard With wire Front Mount Vortical Mount Pulse 16 16PPR 25 25PPR Ckick Rotation Torque S 4mN m C 6mN m With M 10.5mN m H 16mN m Non W/O 4mN m Push Switch Force S 3.2N H 5N Power Voltage A 5V B 3.3V R Shaft Shape Round Shaft length 16 16mm 20 20mm Dimensions (mm) RE23NS RE23NF (front mount) RE23NC (with wire) RE23NV (vertical mount) Circuitr y RE23 5V RE23 3.3V Terminal number Mounting hole dimensions (mm) Precautions PWB mounting hole dimensions (mm) Wiring Soldering Operation Power Waterproofing Use buffering amplifier when extending lead wire over 30cm. Do not put a load on the terminal area during and immediately after soldering. Do not use flow/reflow soldering machines. Use under specified power voltage and connect properly. Do not fasten tighter with the torque of more than 1.5N m. RE23NF Warranty RE23NV 1 year from the date of shipment

27

28

29 Manual Pulse Generator RE45T series Outline RE45T/V series are compact optical manual pulse generators that allow accurate and smooth manual motion for NC machine tools, industrial machines etc. Features Eco friendly: RoHS compliant Various Options -terminal block mounted type/direct moulding type -output circuit: CMOS, open collector, line driver Enclosed structure design Protection from flux 100PPR, 25PPR available Long life use Specifications Model RE645T***5 RE45T***1 RE45T***D RE45***T2 RE45V***5 Application 5V input 12V input Differential line Photo coupler Power Voltage DC5V±10% DC12V±10% DC5V±10% DC10.8Vto 26.4V Current Power 80mA 60mA 150mA (90mAtyp) 60mA Current Power (Open collector) Out put 30mA CMOS (45T) 330Ωpull-up or open collector 40mA 2.2KΩpull-up or open collector RS-422A (Line driver) Receiver's terminator : 100Ω for each signal Open collector (Current out put type) Out put voltage level 1: (Power voltage 0.5V) level 1: TR is ON Out put voltage (Pull up) level 0: 0.4V (No-load) level 0: TR is OFF Collector voltage (Open collector) Pulse per revolution Click torque Rotational Durability Protection against water Operating Temperature not more than DC30V or 50mA F 100pulse/100Click or 25Pulse/100Click S: (Soft torque) 8 ~ 16mN.m C: (Standard) 32 ~ 64mN.m Over a million times 2m water resistant (2h) (Do not push or rotate under the water) ~ not more than DC30V or 50mA F Part number designation RE45T Number of pulses 1: 100PPR 2: 25PPR 2 Click C: Standard S: Soft Blank: without click C 2 M 3 3 Output M: CMOS O: Open Collector D: Line Driver R: Pull up 4 Supply Voltage 1: 12V 2: 24V 5: 5V 1 B Dial Knob B: 15mm, with Tosoku logo C: 15mm, without logo D: 15mm, with customer logo H: 25mm with Tosoku logo J: 25mm without logo K: 25mm, with customer logo 6 Dial base / Shaft length Blank: W/O dial base,16mm 0: W/O dial base, 18mm 1: With dial base, 18mm Models Supply Out-put Pulse Per Revolution RE45T1_M5 5V 5V 100PPR Standard Model for 5V RE45T1_R1 12V 12V 100PPR Standard Model for 12V RE45T1_O5 5V OC 100PPR RE45T1_O1 12V OC 100PPR RE45T1_O2 24V OC* 100PPR 12V ~ 24V input, photo coupler only RE45T1_D5 5V Differential Line* 100PPR Special model for noise resistance RE45T2_M5 5V 5V 25PPR RE45T2_M1 12V 5V* 25PPR 12V input, 5Voutput RE45T2_O1 12V OC 25PPR RE45T2_O2 24V OC* 25PPR 12V ~ 24V input, photo coupler only RE45T2_D5 5V Differential Line* 25PPR Special model for noise resistance * Differential Line: Connect with terminating resistance 100Ω(Based on RS-422 line receiver). *5V: power voltage = 12V. Output voltage = 5V *OC( For photo coupler): Out put voltage/0level=transistor /OFF=Current/0

30 Dimensions (mm) Dial Dial base Dial attached on the dial base Mounting hole dimensions (mm) Precautions Soldering Temperature Time Manual Soldering Up to 350 Within 3 seconds for each terminal Flow soldering Up to 260 Within 5 seconds for each terminal NOTE: Do not put pressure on terminal during heating or soon after. Circuitry CMOS (M) Open Collector (O) Pull up (R) Line driver (D) Output Waveform 1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1);

31 Manual Pulse Generator RE45B series Outline RE45B series are optical manual pulse generator developed for NC machine tools Features Eco friendly: RoHS compliant Comfortable wide knob Various Options Printing Logo type on the wheel cover upon request Long life use Specifications Application 5V input 2V input Differential line Photo coupler Power Voltage DC5V±10% DC12V±10% DC5V±10% DC10.8V to 26.4V Current power (pull up) 80mA 60mA 150mA (90mAtyp) 60mA Current power(open collector) 30mA 40mA Open collector Output 330ΩPull-up or Open collector 2.2KΩPull-up or Open collector RS-422A (Line driver) (Current output type) Terminating register at receiver Output voltage 1 level:(power voltage 0.5V) 1level:Transistor/ON :100Ω/phrase Output voltage (pull up) 0 level: 0.4V (No-load) 0level:Transistor/OFF Collector voltage DC30V 30V Collector voltage (Open corrector) 40mA 50mA Pulse per revolution 100pulse/100Click or 25pulse/100Click Click torque A,B,C : 8 ~ 16mN.m D: 32 ~ 64mN.m Rotational Durability Over a million rotations Water resistance D type only: 2m water resistant (2h) (Do not push or rotate under the water) Operating Temperature ~ 14F 140F Part number designation RE45B A Type A: With φ 80 dial / mounted by 3 nuts C: With φ 66 dial / mounted by 1 nut D: Without Dial 2 Number of pulses 1: 100PPR 2: 25PPR 3 Output R: Voltage Output O: Open Collector D: Line Driver R B 5 4 Supply Voltage 5: 5V 1: 12V 2: 24V 5 Dial Knob (color:black) B: 15mm, with Tosoku logo C: 15mm, without logo D: 15mm, with customer logo H: 24mm with Tosoku logo J: 24mm without logo K: 24mm, with customer logo Models Supply Pulse Per Revolution RE45B_1R5 5V 5V 100PPR RE45B_1R1 12V 12V 100PPR RE45B_1O5 5V OC 100PPR RE45B_1O1 12V OC 100PPR RE45B_1O2 24V OC* 100PPR RE45B_1D5 5V Differential Line* 100PPR RE45B_2R5 5V 5V 25PPR RE45B_2R1 12V 5V* 25PPR RE45B_2O5 12V OC 25PPR RE45B_2O1 12V OC 25PPR RE45B_2O2 24V OC* 25PPR RE45B_2D5 5V Differential Line* 100PPR * Differential Line: Connect with terminating resistance 100Ω(Based on RS-422 line receiver). *5V:Supple voltage=12v, Output voltage=5v *OC:For photo coupler only, Supply voltage 12 24V

32 Dimensions (mm) Type A (with 80dial / mounted by 3 nuts) Type A, Mounting hole dimensions (mm) Type C (with 66dial / mounted by 1 nut) Type C,D, Mounting Hole Dimension (mm) Type D (without dial) Circuitry Open collector (code:o) Votage Output (code:r) Line Driver (code:d) Output Waveform 1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1);

33 Manual Pulse Generator RE46 series Outline RE46 series are incremental optical manual pulse generators developed for NC machine tools. The depth of the surface-bottom is mere 8mm which allows you to save space behind the panel. Eco friendly: RoHS compliant Features Fine operability with a large wheel and a weight inside Various Options of the input/output circuit: CMOS, open collector, line driver Chattering-free and long-life use with optical unit Original logos available on the wheel cover Specifications Application 5V input 12V input Differential line Photo coupler(12 ~ 24V) Power Voltage DC5V±10% DC12V±10% DC5V±10% DC10.8V to 26.4V Current power (pull up) 80mA 60mA 150mA (90mAtyp) 60mA Current power(open collector) 30mA 40mA Output 330ΩPull-up or Open collector 2.2KΩPull-up or Open collector RS-422A (Line driver) Output voltage (pull up) Collector voltage (Open corrector) Pulse per revolution Click torque Rotational Durability Operating Temperature Weight 1 level:(power voltage 0.5V) 0 level: 0.4V (No-load) DC30V 50mA Terminating register at receiver :100Ω/phrase 100pulse/100Click or 25pulse/100Click 32 ~ 64mN.m (320 ~ 640gf.cm) Over a million rotations -10 ~ 60 (14F ~ 140F) 220g Open collector (Current output type) 1level:Transistor/ON 0level:Transistor/OFF 30V 50mA Part number designation RE46 1 Type A 1 2 Number of Pulses 1: 100PPR 2: 25PPR 3 Click C: Standard 4 Output R: Voltage Output O: Open Collector D: Line Driver 1 2 C 3 R Supply Voltage 5: 5V 1: 12V 2: 12 24V B 6 6 Dial Knob (color black) B: 15mm with Tosoku logo C: 15mm without logo D: 15mm customer logo H: 24mm with Tosoku logo J: 24mm without logo K: with customer logo Models Supply Pulse Per Revolution RE46A1CR5_ 5V 5V 100PPR RE46A1CR1_ 12V 12V 100PPR RE46A1CO5_ 5V OC 100PPR RE46A1CO1_ 12V OC 100PPR RE46A1CO2_ 24V OC* 100PPR RE46A1CD5_ 5V Differential Line* 100PPR RE46A2CR5_ 5V 5V 25PPR RE46A2CR1_ 12V 5V* 25PPR RE46A2CO5_ 5V OC 25PPR RE46A2CO1_ 12V OC 25PPR RE46A2CO2_ 24V OC* 25PPR RE46A2CD5_ 5V Differential Line* 25PPR * Differential Line: Connect with terminating resistance 100Ω(Based on RS-422 line receiver). *5V:Supply voltage=12v, Output voltage=5v *OC:For photo coupler only, Supply voltage 12 24V

34 Dimensions (mm) Panel Mounting Hole Circuitry Open collector (code:o) Votage Output (code:r) Line Driver (code:d) Output Waveform 1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1);

35 Manual Pulse Generator RE47 series Outline RE47 is an incremental optical manual pulse generator developed mainly for NC machine tools. The series are most compact of all MPGs on our line-up and universally compatible with various sorts of compact MPGs. Eco friendly: RoHS compliant φ60mm diameter Specifications Features Less than 10mm in depth (from surface-to-bottom) allows you to save space behind the panel Fine operability with a weight inside of the dial. Various Options of the input/output circuit: CMOS, open collector, line driver Chattering-free and long-life use with optical unit Original logos available on the dial Application 5V input 12V input Differential line Photo coupler(12 ~ 24V) Power Voltage DC5V±10% DC12V±10% DC5V±10% DC10.8V to 26.4V Current power (pull up) 80mA 60mA 150mA (90mAtyp) 60mA Current power(open collector) 30mA 40mA Open collector Output 330ΩPull-up or Open collector 2.2KΩPull-up or Open collector RS-422A (Line driver) (Current output type) Terminating register at receiver Output voltage 1 level:(power voltage 0.5V) :100Ω/phrase 1level:Transistor/ON (pull up) 0 level: 0.4V (No-load) 0level:Transistor/OFF Collector voltage (Open corrector) DC30V 50mA 30V 50mA Pulse per revolution 100pulse/100Click or 25pulse/100Click Panel water resistance IP54 Click torque 8 ~ 16mN.m (80 ~ 160gf.cm) Rotational Durability Over a million rotations Operating Temperature -10 ~ 60 (14F ~ 140F) Weight 85g Part number designation RE47 1 Type A 1 2 Number of Pulses 1: 100PPR 2: 25PPR 3 Click S: Soft 4 Output R: Voltage Output O: Open Collector D: Line Driver 1 2 S 3 R Supply Voltage 5: 5V 1: 12V 2: 12 24V B 6 6 Dial Knob (color black) B: 15mm with Tosoku logo C: 15mm without logo D: 15mm customer logo Models Supply Pulse Per Revolution RE47A1SR5_ 5V 5V 100PPR RE47A1SR1_ 12V 12V 100PPR RE47A1SO5_ 5V OC 100PPR RE47A1SO1_ 12V OC 100PPR RE47A1SO2_ 24V OC* 100PPR RE47A1SD5_ 5V Differential Line* 100PPR RE47A1SR5_ 5V 5V 25PPR RE47A1SR1_ 12V 5V* 25PPR RE47A1SO5_ 5V OC 25PPR RE47A1SO1_ 12V OC 25PPR RE47A1SO2_ 24V OC* 25PPR RE47A1SD5_ 5V Differential Line* 25PPR * Differential Line: Connect with terminating resistance 100Ω(Based on RS-422 line receiver). *5V:Supply voltage=12v, Output voltage=5v *OC:For photo coupler only, Supply voltage 12 24V

36 Dimensions (mm) Panel Mounting Hole Circuitry Open collector (code:o) Votage Output (code:r) Line Driver (code:d) Output Waveform 1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1);

37

38

39 Handy Manual Pulse Generator HT Series Outline HT series are easy-to-handle and compact Handy MPGs which put a premium on safety with 3-position enabling switches and emergency stop buttons. Features Ergonomically designed and compact to be held with one hand 3-position (off-on-off) enabling switch available on either side Upper part is free to design and allows various kinds of switches (including emergency stop button) to be set RoHS compliant On the middle part: either MR8A - the rotary switch series or MR8C - the digital code switch series selectable Strong plate magnets available on back side (as option) Various types of curl cords provided along with connectors of all sorts at your request Specifications 1. Body Dimension (mm) MR8A (rotary switch) 25V15mA (AC/DC) LED light DC24V Green MR8C (code switch) 15V10mA (AC/DC) * See MR8A/MR8C catalog for more details Enabling switches Available on both sides Logo Logo available on the wheel cover 3. Curl/Straight Cords 2. Mechanical specifications 2.1 Rotary Encoder Unit Output Voltage DC5V±10%, DC12V±10% or 12~24V Wheel 100 clicks / rotation 100 pulses or 25 pulses per rotation Rotational Durability Over 1,000,000 times Output Waveform 1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1); * See RE45B catalog for more details 2.2 Selector Switches Curl Cord Straight Cord 5. Connector Unit Connector Warranty 19/25-conductor shielded cable 19-conductor: select from 2m, 3m, 4m, 5m 25-conductor: select from 3m, 5m (We will select either 19 or 25-conductor in accordance with required functions) For further details, please see the catalogues for curl cords Also available Dripproofed connector to be attached on the end of the cord optionally provided (EBSP2119-D/EBSP2119FGS-D by DDK) 1 year from the date of shipment.

40 Dimensions (mm) HT Unit with curl cord This drawing is an example, it may differ according to number of swithes etc. Original Holder Material : SPCC Cathodic Electrodeposition Coating

41 H T series Order Sheet Print out this page for sending orders. We'll hand in to you a drawing in accordance with your order. The drawing shall be approved before starting in on production. 1)Select one from each spec table and fill blank spaces with "". Axis Selector/Multiplication Selector Switches Pulses/Rev. MR8C type Gray code switch 100PPR MR8A type Selection switch 25PPR *25PPR and yet 100 Clicks/Revolution Indications for Axis Selector left e.g. OFF, X, Y, Z, 4, 5 Power Supply Output 5V 5V 330Ω Pull Up Indications for Multiplication Selector right 5V 5V Open Collector for Line Driver e.g. 1, 10, V 5V 2.2kΩ Pull Up 12V 12V 2.2kΩ Pull Up 12V Open Collector 12V- for Photocoupler Curl Cord Length 24V Open Collector 2m Curl Cord (for only 19-conductor cord) * Transistor will be "OFF" at every 3m Curl Cord clicked positions. 4m Curl Cord (for only 19-conductor cord) For other open collector output 5m Curl Cord models, transistors will be "ON" at * We will select either 19-conductor cord or 25- every clicked positions. conductor cord to cover your requested specs Logo on the dial None with "TOSOKU" logo Waterproofed Connector for curl cord with an original logo( ) None Male connector EBSP2119MG-D, DDK 3-Positions Enabling Switch (contacts) Female connector EBSP2119FGS-D, DDK None * Fill in both spaces to order both connectors. One on the left On both sides 2) Other options * Assigned contacts should be 2 or Other options to request less for normally open (NO) and 2 or e.g. less for normally closed (NC). Switches with LED illumination x 2 (2A2B maximum.) 2 contact selector switch x Emergency Switch contacts None Mounted * 1 for (NO), 4 for (NC) maximum (1A/4B). Maximum of 4 contacts in total (1A3B or 4B). Magnet on the backside NoneN Mounted Rotary Encoders Pulse Generators Rotary Switches Code Switches Lever Switches Trackballs TOKYO SOKUTEIKIZAI Co., Ltd.

42

43 Handy Manual Pulse Generator HC1 Series Outline HC1 is the most compact model of all our MPG series, developed for usage in numerous industrial areas. Compact, thin-line and lightweight (26mm) Axis/Multiplication selection can be set according to customers' requirement Sealed structured box RoHS compliant (box/cord) Exclusive easy-to-attach holder as a standard accessory Rubber magnet for option Logo can be printed on the wheel cover Features Specifications 1. Body Dimension (mm)* LED Visible Indicator DC24V Green Noise Immunity EN compliant Other Features Logo available on the wheel cover * excluding hook, switch and knob 2. Mechanical specifications 2.1 Rotary Encoder Unit * See RE45B page for details 2.2 Selector Switches * See MR8A/MR8C page for details 4. Curl/Straight Cords Curl Cord Straight Cord 5. Connector Unit Connector 19/25-conductor shielded cable 19-conductor: select from 2m, 3m, 4m, 5m 25-conductor: select from 3m, 5m (We will select either 19 or 25-conductor in accordance with required functions) For further details, please see the catalogues for curl cords Also available Waterproofed connector to be attached on the end of the cord optionally provided 3. Environmental specifications Operating temperature Storage temperature F ~ 140F F ~ 158F Warranty 1 year from the date of shipment.

44 Part Number Designation HC1 main unit with curl cord Original Holder(THA) Dimensions (mm)

45 Circuitry HC115A*** DIAL Supply Voltage:5V Output:5V Resolution:100PPR (100-Detent) MAGNIFICATION R1 R2 R3 R4 C3 C4 TR1 TR2 C2 1 COM (OFF) AXIS SELECTOR X OFF Y COM Z 4 (5) (6) LAMP R1 CD1 +5V B A 0V COM x1 x10 x100 X Y Z L +L E Shield Curl Code Wiring Terminal No. Terminal symbol Color of wire V - B - A 0V COM X Y Z L +L - E Brown Red Orange Yellow Green Blue Purple Gray White Black Pink Light blue Yellow-green Light purple Color-less Color-less/BK Light blue/bk Yellow-green/BK Light brown Dial +5VDC Function Dial Channel B Output(0/5V) Dial Channel A Output(0/5V) Dial 0VDC Common Terminal ofmultiplication Switch Axis X Axis Y Axis Z Axis 4 (Axis 5) (Axis 6) LED Lamp (-) LED Lamp +24VDC Shielding Wire(connect to GND) * /BK:with Black line LED Lamp and Switches LED Lamp X Y Z X1 X10 X100 OFF 4 Axis Selector Switch Magnification Switch HC1-7 Mar.21,2012

46 Circuitry HC115A***03 DIAL Supply Voltage:5V Output:5V Resolution:100PPR (100-Detent) MAGNIFICATION X 1 X 10 X 100 E A B E A B D C AXIS SELECTOR OFF X Y Z 4 E A B D E A B D C LAMP R1 R2 R3 R4 CD1 C3 C4 TR1 TR2 C2 R1 +5V B A 0V RC R1 R2 R4 L1 L2 L4 L8 LC -L +L E Shield Curl Code Wiring Terminal No. Terminal symbol Color ofwire V - B - A 0V RC R1 R2 R4 - L1 L2 L4 L8 LC -L +L - E Brown Red Orange Yellow Green Blue Purple Gray White Black Pink Light blue Yellow-green Light purple Color-less Color-less/BK Light blue/bk Yellow-green/BK Light brown Dial +5VDC Function Dial Channel B Output(0/5V) Dial Channel A Output(0/5V) Dial 0VDC Common Terminal ofmultiplication Switch Terminal E Terminal A Terminal B Terminal E Terminal A Terminal B Terminal D Common Terminal ofaxis Selector Switch LED Lamp (-) LED Lamp +24VDC Shielding Wire(connect to GND) * /BK:with Black line LED Lamp and Switches LED Lamp X Y Z X1 X10 X100 OFF 4 Axis Selector Switch Magnification Switch HC1-6 Mar.21,2012

47 Circuitry HC11DA*** DIAL Supply Voltage:5V Output:Differential Output Resolution:100PPR (100-Detent) MAGNIFICATION (OFF) COM AXIS SELECTOR X OFF Y Z 4 (5) (6) COM LAMP CD1 C2 C3 IC1 26C31 C1 R1 +5V B B A A 0V COM x1 x10 x100 X Y Z L +L E Shield Curl Code Wiring Terminal No. Terminal symbol Color of wire 1 +5V B B A A 0V COM X Y Z L +L - E Brown Red Orange Yellow Green Blue Purple Gray White Black Pink Light blue Yellow-green Light purple Color-less Color-less/BK Light blue/bk Yellow-green/BK Light brown Dial +5VDC Dial 0VDC Function Dial Channel B Inverting Output Dial Channel B Output Dial Channel A Inverting Output Dial Channel A Output Common Terminal ofmultiplication Switch Axis X Axis Y Axis Z Axis 4 (Axis 5) (Axis 6) LED Lamp (-) LED Lamp +12~+24VDC Shielding wire(connect to GND) * /BK:with Black line LED Lamp and Switches LED Lamp X Y Z X1 X10 X100 OFF 4 Axis Selector Switch Magnification Switch HC1-5 Mar.21,2012

48 How to mount knobs for selector switches (HC1/HM/HT series) 1. All switches select OFF circuits (position no.1) when fully turned counterclockwise. 1 click/2 clicks clockwise will make a connection of position no.2/no.3 with COM which feeds a signal for each. 2. If the indications on the plate begin with OFF, 0 or any other indication to render disconnection, confirm that the shaft is turned fully counterclockwise to the end, then screw the knob on to it within 5kgf.cm of torque. If the indications begin with X, x1 or any other indication to render connection, 1) turn 1 click clockwise from the very left end, 2) adjust the white line on the knob with the indication, then 3) tighten the screw of the knob (cf. picture 2. multiplier switch). Picture 1. plate 3. The standard wiring diagrams indicated do not necessarily be consistent with the actual delivered products. Confirm the diagrams on the specifications when mounting the knobs. 4. When the knob is turned, it will stop where stopper-pin is inserted. To alter the position to stop, refer to picture 3 and 4, then re-insert the pin into the designated position. Picture 2. Indications and wiring Picture 3. The back of the knob (holes for stopper-pins) Numbers and alphabets with show positions to start, and those with show positions to stop. Select the appropriate position from the picture 4 and insert the pins into the correspondent positions. e.g. The plate shown in the picture 1 will be set as follows. Axis Selector: A, 4/ Multiple Selector: B, 3. Picture 4. Correspondent Positions of the Pins

49 Handy Manual Pulse Generator HM Series Outline HM series have a variety of switches which can be customized according to your requests. The model is compact and lightweight, which is perfect for accurate and smooth manual operation. Features Various switches available : Emergency switch (2 positions), side mounted (right/left) enabling switches, 2 rotary switches (as axis and multiplication selector etc. ) Compact, thin-line and lightweight. Strong plate magnets available on back side. (optional ) RoHS compliant (box/cord) Various types of curl cords provided along with connectors of all sorts at your request. Specifications 1. Body Dimension (mm) MR8A (Rotary switch) 25V15mA (AC/DC) LED light DC24V Green MR8C (Code switch) 15V10mA (AC/DC) * See MR8A/MR8C pages for details Enabling Switch Available on both sides Logo Logo available on the wheel cover 3. Curl/Straight Cords 2. Mechanical specifications 2.1 Rotary Encoder Unit Output Voltage Wheel Rotational Durability Output Waveform DC5V±10%, DC12V±10% 100 clicks / rotation 100 puluse or 25 pulses per rotation Over 1,000,000 times 1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1); 2.2 Selector Switches Curl Cord Straight Cord 4. Connector Unit Connector 19/25-conductor shielded cable 19-conductor: select from 2m, 3m, 4m, 5m 25-conductor: select from 3m, 5m (We will select either 19 or 25-conductor in accordance with required functions) For further details, please see the catalogues for curl cords Also available Dripproofed connector to be attached on the end of the cord optionally provided Warranty 1 year from the date of shipment. * See RE45B page for details

50 Dimensions (mm) HM Unit with curl cord This drawing is an example, it may differ according to number of swithes etc. Samples of Case layout Original Holder

51 H M series Order Sheet Print out this page for sending orders. We'll hand in to you a drawing in accordance with your order. The drawing shall be approved before starting in on production. 1)Select one from each spec table and fill blank spaces with "". Axis Selector/Multiplication Selector Switches Pulses/Rev. MR8C type Gray code switch 100PPR MR8A type Selection switch 25PPR *25PPR and yet 100 Clicks/Revolution Indications for Axis Selector left e.g. OFF, X, Y, Z, 4, 5 Power Supply Output 5V 5V 330Ω Pull Up Indications for Multiplication Selector right 5V 5V Open Collector for Line Driver e.g. 1, 10, V 5V 2.2kΩ Pull Up 12V 12V 2.2kΩ Pull Up 12V Open Collector 12V- for Photocoupler Curl Cord Length 24V Open Collector 2m Curl Cord (for only 19-conductor cord) * Transistor will be "OFF" at every 3m Curl Cord clicked positions. 4m Curl Cord (for only 19-conductor cord) For other open collector output 5m Curl Cord models, transistors will be "ON" at * We will select either 19-conductor cord or 25- every clicked positions. conductor cord to cover your requested specs Logo on the dial None with "TOSOKU" logo Waterproofed Connector for curl cord with an original logo( ) None Male connector EBSP2119MG-D, DDK 2-Position Enabling Switch Female connector EBSP2119FGS-D, DDK None * Fill in both spaces to order both connectors. One on the left On both sides 2) Other options Other options to request e.g. Switches with LED illumination x 2 Emergency Switch contacts 2 contact selector switch x None Mounted * 1 for (NO), 4 for (NC) maximum (1A/4B). Maximum of 4 contacts in total (1A3B or 4B). Magnet on the backside NoneN Mounted Rotary Encoders Pulse Generators Rotary Switches Code Switches Lever Switches Trackballs TOKYO SOKUTEIKIZAI Co., Ltd.

52

53 Handy Manual Pulse Generator HR Series Outline HR series provide you comfort in long time use and safety with various options of switches. Features Ergonomically designed to be held with one hand 3-position (off-on-off) switch available on both sides RoHS compliant (box/cord) Upper part is free to design and allows various kinds of switches (including emergencystop button) to be set HR series also provide you various line-up of switches to be set on the middle part: DP - the digital code switch series, RS400 - the rotary switch series etc. Strong plate magnets available on back side. (optional) Various types of curl cords provided along with connectors by all sorts of your request Specifications 1. Body Dimension Enabling Switch Other Features 2. Mechanical specifications 2.1 Rotary Encoder Unit Output Voltage Wheel Rotational Durability Output Waveform (mm) Available on both sides Logo available on the wheel cover DC5V±10%, DC12V±10% 100 clicks / rotation 100 puluse or 25 pulses per rotation Over 1,000,000 times 1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1); 2.2 Selector Switches * See RS400/DP pages for details 3. Curl/Straight Cords Curl Cord Straight Cord 4. Connector Unit Connector 19/25-conductor shielded cable 19-conductor: select from 2m, 3m, 4m, 5m 25-conductor: select from 3m, 5m (We will select either 19 or 25-conductor in accordance with required functions) For further details, please see the catalogues for curl cords Also available Dripproofed connector to be attached on the end of the cord optionally provided Warranty 1 year from the date of shipment. * See RE45B page for details

54 Dimensions (mm) HR Unit with curl cord This drawing is an example, it may differ according to number of swithes etc. Original Holder

55 H R series Order Sheet Print out this page for sending orders. We'll hand in to you a drawing in accordance with your order. The drawing shall be approved before starting in on production. 1)Select one from each spec table and fill blank spaces with "". Axis Selector/Multiplication Selector Switches Pulses/Rev. Gray code switch 100PPR Binary code switch 25PPR Selection switch *25PPR and yet 100 Clicks/Revolution Indications for Axis Selector left e.g. OFF, X, Y, Z, 4, 5 Power Supply Output 5V 5V 330Ω Pull Up 5V Open Collector Indications for Multiplication Selector right 5V for Line Driver e.g. 1, 10, V 5V 2.2kΩ Pull Up 12V 12V 2.2kΩ Pull Up 12V Open Collector 12V- for Photocoupler Curl Cord Length * 24V Open Collector 2m Curl Cord (for only 19-conductor cord) * Transistor will be "OFF" at every 3m Curl Cord clicked positions. 4m Curl Cord (for only 19-conductor cord) For other open collector output 5m Curl Cord models, transistors will be "ON" at * We will select either 19-conductor cord or 25- every clicked positions. conductor cord to cover your requested specs Logo on the dial None with "TOSOKU" logo Waterproofed Connector for curl cord with an original logo( ) None Male connector EBSP2119MG-D, DDK 3-Positions Enabling Switch (contacts) Female connector EBSP2119FGS-D, DDK None * Fill in both spaces to order both connectors. One on the left On both sides 2) Other options * Assigned contacts should be 2 or Other options to request less for normally open (NO) and 2 or e.g. less for normally closed (NC). Switches with LED illumination x 2 (2A2B maximum.) 2 contact selector switch x Emergency Switch contacts None Mounted * 1 for (NO), 4 for (NC) maximum (1A/4B). Maximum of 4 contacts in total (1A3B or 4B). Magnet on the backside NoneN Mounted Rotary Encoders Pulse Generators Rotary Switches Code Switches Lever Switches Trackballs TOKYO SOKUTEIKIZAI Co., Ltd.

56

57 Handy Manual Pulse Generator HS Series Outline HS is a free-to-design handheld manual pulse generator which allows wide variety of switches laid out at your service. Features Optional layout of switches 3-position (off-on-off) switch available on both sides RoHS compliant (box/cord) Emergency stop button also available Holder provided Strong plate magnet as an additional accessory. (optional) Various types of curl cords provided along with connectors by all sorts of your request Specifications 1. Body Dimension Enabling Switch Other Features 2. Mechanical specifications 2.1 Rotary Encoder Unit Output Voltage Wheel Rotational Durability Output Waveform (mm) Available on both sides Logo available on the wheel cover DC5V±10%, DC12V±10% 100 clicks / rotation 100 puluse or 25 pulses per rotation Over 1,000,000 times 1) Turning the shaft clockwise would generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A when the signal B outputs a high voltage(1); * See RE45B page for details 2.2 Selector Switches RS400 (Rotary switch) AC 30V1.0A / 200V0.2A DC 20V1.0A / 200V0.1A (Registance Load) DP (Code switch) AC 5V0.5V/50V0.05A DC 5V0.25A / 25V0.05A (Registance Load) * See RS400/DP pages for details 3. Curl/Straight Cords Curl Cord Straight Cord 4. Connector Unit Connector Warranty 19/25-conductor shielded cable 19-conductor: select from 2m, 3m, 4m, 5m 25-conductor: select from 3m, 5m (We will select either 19 or 25-conductor in accordance with required functions) For further details, please see the catalogues for curl cords Also available Dripproofed connector to be attached on the end of the cord optionally provided 1 year from the date of shipment.

58 䠉 䠇 Dimensions (mm) This drawing is an example, it may differ according to number of swithes etc. HS Main unit 㻝㻤㻜 䠇 䠫䠢䠢 䠉 䠴 䠵 䠶 䠐 㻥㻢 㻠㻜 㽢䠍 㽢䠍䠌 㽢䠍䠌䠌 㻞㻞 㻝㻠 㻝㻢 㻡㻜 㻔㻟㻡㻕 㻔㻠㻡㻕 HS Original holder 㻝㻣㻡 㻢㻜 㼼㻜㻚㻝 㻢㻜 㼼㻜㻚㻝 㻟㻜㼼㻜㻚㻝 㻹㼍㼠㼑㼞㼕㼍㼘㻌㻦㻌㻿㻼㻯㻯 㻮㼘㼍㼏㼗㻌㻯㼔㼞㼛㼙㼍㼠㼑 㻞㻤 㻞㻡㻚㻣 㻝㻞 㻡㻜 㻟㻠㼼㻜㻚㻝 㻞㻣 㻝㻜 㻝㻢㻚㻡 㻞㻤 㻥㻠 㻤㻞 㻞㻤 㻴㼛㼘㼑㻌㼒㼛㼞㻌㻣㻙㻹㻠 HS Layout examples

59

60

61 Track ball TB36 Series Outline TB36 series are high-spec trackballs for various sorts of professional use: for medical devices (e.g. ultrasonic reflectoscope, specular microscope), mixing units of audio devices, factory automation systems etc. Low Cost RoHS compliant Translucent ball with LED option Easy Maintenance Long life use -Over 3million ball revolutions. Features Specifications Operating temperature Supply voltage Ball 0 to F to 113F DC5V±5% no more than 30mA S φ 36mm/1.4inch Output axes 2way axes (X, Y) Pulse 216 pulses per ball generation (±10%) Out put signals Ball driving force Life time Ball load Two square wave signals: CMOS (TTL) 15±10mN Over 3million ball revolutions 200N maximum downward pressure Mounting position Horizontal to 30 Output Wave form

Manual Pulse Generator Catalogue

Manual Pulse Generator Catalogue Manual Pulse Generator RE45T series Outline RE45T/V series are compact optical manual pulse generators that allow accurate and smooth manual motion for NC machine tools, industrial machines etc. Features

More information

Rotary Switch Catalogue

Rotary Switch Catalogue Rotary Switches RS300/400/500 Series Outline Our RS series embody the manufacturing history of our company. All series are sturdy and solid with high dependability designed for control units of plants,

More information

Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E

Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E Gerolor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 12 12 1 1 0 0 2 2 31 31 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 2mm Keyed (A) 1.0'

More information

Gerotor Motors Series Dimensions A,B C T L L G1/2 M G1/ A 4 C H4 E

Gerotor Motors Series Dimensions A,B C T L L G1/2 M G1/ A 4 C H4 E Gerotor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 5 5 1 0 1 0 3 3 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 25mm Keyed (A) 1.0' 6T Spline

More information

接线端子--Connectors规格书.doc

接线端子--Connectors规格书.doc Connectors with/without wire protector high-temperature resistant* High grade flexible strips Resistant to temperature up to 100 C (to 140 C) Multiple approvals Raised base Available with or without wire

More information

LH_Series_Rev2014.pdf

LH_Series_Rev2014.pdf REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check

More information

K301Q-D VRT中英文说明书141009

K301Q-D VRT中英文说明书141009 THE INSTALLING INSTRUCTION FOR CONCEALED TANK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall

More information

BC04 Module_antenna__ doc

BC04 Module_antenna__ doc http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 1 of 10 http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 2 of 10 http://www.infobluetooth.com TEL:+86-23-68798999

More information

Captive Screws Styled knob series M3 thread size Smooth knob meets UL-1950 Designed for hand operation Spring ejected Wide variety of sizes, re

Captive Screws Styled knob series M3 thread size Smooth knob meets UL-1950 Designed for hand operation Spring ejected Wide variety of sizes, re 440 47 Captive Screws d knob series M3 thread size Smooth knob meets U-1950 Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options Material and Finish : Press-in:

More information

Ratings Specifications Outstanding Environmental Performance The body resin used by the BOXTC series is a reinforced PBT, which is PBT resin with high

Ratings Specifications Outstanding Environmental Performance The body resin used by the BOXTC series is a reinforced PBT, which is PBT resin with high Box Terminal TOGI s Box Terminals are the choicest terminal boxes for cable connection of industrial equipment, such as machine tool control, switching, power distribution and instrumentation equipment.

More information

. Land Patterns for Reflow Soldering.Recommended Reflow Soldering Conditions (For Lead Free) TYPE PID0703 PID0704 PID1204 PID1205 PID1207 PID1209 L(mm

. Land Patterns for Reflow Soldering.Recommended Reflow Soldering Conditions (For Lead Free) TYPE PID0703 PID0704 PID1204 PID1205 PID1207 PID1209 L(mm .Features: 1.Magnetic Shielded surface mount inductor with high current rating. 2.Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in

More information

SHIMPO_表1-表4

SHIMPO_表1-表4 For servo motor ABLEREDUCER SSeries Coaxial shaft series Features S series Standard backlash is 3 arc-min, ideal for precision control. High rigidity & high torque were achived by uncaged needle roller

More information

Table of Contents Power Film Capacitors Power Film Capacitors Series Table Product Type Series Voltage Capacitance() Page DC-Link Power Film Capacitors Power Film Capacitors Power Film Capacitors Power

More information

Cube20S small, speedy, safe Eextremely modular Up to 64 modules per bus node Quick reaction time: up to 20 µs Cube20S A new Member of the Cube Family

Cube20S small, speedy, safe Eextremely modular Up to 64 modules per bus node Quick reaction time: up to 20 µs Cube20S A new Member of the Cube Family small, speedy, safe Eextremely modular Up to 64 modules per bus de Quick reaction time: up to 20 µs A new Member of the Cube Family Murrelektronik s modular I/O system expands the field-tested Cube family

More information

SHIMPO_表1-表4

SHIMPO_表1-表4 For servo motor ABLEREDUCER L Series Features Coaxial shaft series L series Helical gears contribute to reduce vibration and noise. Standard backlash is 5 arc-min, ideal for precision control. High rigidity

More information

Microsoft Word - PZ series.doc

Microsoft Word - PZ series.doc 叠 层 片 式 铁 氧 体 磁 珠 P 系 列 Multilayer Chip Ferrite Bead P Series Operating Temp. : -4 ~ +8 特 征 FEATUES 内 部 印 有 银 电 极 的 叠 层 结 构, 铁 氧 体 屏 蔽 无 串 扰 Internal silver printed layers and magnetic shielded structures

More information

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt E15-3D1 Compact 4-Way Cassette type MMU-AP0071MH2UL MMU-AP0091MH2UL MMU-AP0121MH2UL MMU-AP0151MH2UL MMU-AP0181MH2UL Contents 1. Specifications 2. Dimensions 3. Center of gravity 4. Piping diagram 5. Wiring

More information

Current Sensing Chip Resistor

Current Sensing Chip Resistor 承認書 APPROVAL SHEET 廠商 : 客戶 : 麗智電子 ( 昆山 ) 有限公司 核準審核制作核準審核簽收 公 司 章 公 司 章 Liz Electronics (Kunshan) Co., LTD No. 989, Hanpu Road Kunshan City Jiangsu Province China Tel:0086-0512-57780531 Fax:0086-0512-57789581

More information

pdf

pdf THE INSTLLING INSTRUCTION FOR CONCELED TNK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall

More information

000

000 Style and Usage Application of Pogo Pin Connector Portable Electronic Products ( Notebook, MP3, DSC, GPS, TV Game Peripherals...) Telecommunication Products (Cell phone, Two-Way Radio, Blue tooth..) Automotive

More information

OVLFx3C7_Series_A3_bgry-KB.pub

OVLFx3C7_Series_A3_bgry-KB.pub (5 mm) x High brightness with well-defined spatial radiation patterns x U-resistant epoxy lens x Blue, green, red, yellow Product Photo Here Each device in the OLFx3C7 series is a high-intensity LED mounted

More information

HC50246_2009

HC50246_2009 Page: 1 of 7 Date: June 2, 2009 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

HC70245_2008

HC70245_2008 Reliability Laboratory Page: 1 of 6 Date: September 5, 2008 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified

More information

Microsoft Word - 301E高温样本封面.doc

Microsoft Word - 301E高温样本封面.doc 无锡卓尔阀业有限公司 301E 三偏心高温 蝶阀 Triple Eccentric High Temperature Butterfly Valves STANDARD SPECIFICATION 301E GENERAL 301E Triple Eccentric High Temperature Butterfly valve 301E Triple eccentric high temperature

More information

OA-253_H1~H4_OL.ai

OA-253_H1~H4_OL.ai WARNINGS Note: Read ALL the following BEFORE using this product. Follow all Guidelines at all times while using this product. CAUTION This warning indicates possibility of personal injury and material

More information

Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies to all d

Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies to all d WeChat Search Visual Identity Guidelines WEDESIGN 2018. 04 Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies

More information

Chroma 61500/ bit / RMS RMS VA ()61500 DSP THD /61508/61507/61609/61608/ (61500 ) Chroma STEP PULSE : LISTLIST 100 AC DC

Chroma 61500/ bit / RMS RMS VA ()61500 DSP THD /61508/61507/61609/61608/ (61500 ) Chroma STEP PULSE : LISTLIST 100 AC DC MODEL 61509/61508/61507/ 61609/61608/61607 PROGRAMMABLE AC POWER SOURCE MODEL 61509/61508/61507/ 61609/61608/61607 61509/61609: 6kVA 61508/61608: 4.5kVA 61507/61607: 3kVA : 0-175V/0-350V/Auto : DC, 15Hz-2kHz

More information

8260

8260 Manual and Pilot Operated Spool Valves 6L Stainless Steel and Brass Bodies /4" to " NPT / / 6/6 Features Ideal for valve automation for the oil and gas market Reliable, robust design with high flow performance

More information

HC20131_2010

HC20131_2010 Page: 1 of 8 Date: April 14, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

iml v C / 4W Down-Light EVM - pplication Notes. IC Description The iml8683 is a Three Terminal Current Controller (TTCC) for regulating the cur

iml v C / 4W Down-Light EVM - pplication Notes. IC Description The iml8683 is a Three Terminal Current Controller (TTCC) for regulating the cur iml8683-220v C / 4W Down-Light EVM - pplication Notes iml8683 220V C 4W Down Light EVM pplication Notes Table of Content. IC Description... 2 2. Features... 2 3. Package and Pin Diagrams... 2 4. pplication

More information

Microsoft Word - LD5515_5V1.5A-DB-01 Demo Board Manual

Microsoft Word - LD5515_5V1.5A-DB-01 Demo Board Manual Subject LD5515 Demo Board Model Name (5V/1.5A) Key Features Built-In Pump Express TM Operation Flyback topology with PSR Control Constant Voltage Constant Current High Efficiency with QR Operation (Meet

More information

HCD0174_2008

HCD0174_2008 Reliability Laboratory Page: 1 of 5 Date: December 23, 2008 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified

More information

1-S40A...-1 DAT00452 V.005

1-S40A...-1 DAT00452 V.005 1. 1-S40A -1 Technical data: DATA SHEET Technical data Unit 1-S40A -1 OIML R60 D1 C3 Emax Max. capacity Kg 50,100,200,500 50,100,200,500 t 1, 2, 3, 5 1, 2, 3, 5 vmin % of Cn 0.0286 0.0120 Sensitivity mv/v

More information

Ryobi 10 in. Sliding Compound Miter Saw With Laser Model No. TSS102L Repair Sheet 0 1 2 3 4 62 65 5 6 36 68 6 8 69 6 9 80 81 6 66 40 82 23 3 4 6 44 43 4 45 50 46 52 48 49 51 59 55 54 53 60 5 61 40 58 63

More information

iml v C / 0W EVM - pplication Notes. IC Description The iml8683 is a Three Terminal Current Controller (TTCC) for regulating the current flowin

iml v C / 0W EVM - pplication Notes. IC Description The iml8683 is a Three Terminal Current Controller (TTCC) for regulating the current flowin iml8683-220v C / 0W EVM - pplication Notes iml8683 220V C 0W EVM pplication Notes Table of Content. IC Description... 2 2. Features... 2 3. Package and Pin Diagrams... 2 4. pplication Circuit... 3 5. PCB

More information

Induction Heating and Melting Capacitors

Induction Heating and Melting Capacitors General Information Induction Heating and Melting Capacitors pplication: The capacitors are applicable for indoor use and intended to be used for power factor correction in induction heating, melting,

More information

8016_2_1page

8016_2_1page VARICONTM PART NUMBERING SYSTEM 00 NO. NUMBER OF CONTACTS 20=020, 38=038, 56=056, 90=090, 120=120 CONTACT CODE INSULATOR V=Standard Type HV=For High Voltage ( ) ( NO. OF CONTACTS) 20,38,56,90,120 (PITCH

More information

FIGURE A

FIGURE A RYOBI in. TABLE SAW MODEL NUMBER RTS1 REPAIR SHEET 5 5 51 1 5 50 55 5 5 5 5 0 0 0 55 5 5 5 5 0 1 1 1 1 1 5 0 1 5 1 0 5 0 1 1 0 1 1 1 11 1 1 1 15 FIGURE A The model number will be found on a label attached

More information

SIE 004 ATTUATORE EETTRICO EECTRIC ACTUATOR ID.COT.EQ PZW also avaliable with U approval. STADARD VERSIO 0 90 ( O REQUEST ) ODE VOTAGE 0040V A

SIE 004 ATTUATORE EETTRICO EECTRIC ACTUATOR ID.COT.EQ PZW also avaliable with U approval. STADARD VERSIO 0 90 ( O REQUEST ) ODE VOTAGE 0040V A SIE 004 GEERA SPECIFICATIOS The BIA electric actuators are suitable for th generation, together with pr The range has been manufactured with following characteristics: The housing of the actuators provides

More information

1.ai

1.ai HDMI camera ARTRAY CO,. LTD Introduction Thank you for purchasing the ARTCAM HDMI camera series. This manual shows the direction how to use the viewer software. Please refer other instructions or contact

More information

CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm mm Spindle bore 181mm is standard. 255,5 or 5mm is option. Chuck is optional. You ca

CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm mm Spindle bore 181mm is standard. 255,5 or 5mm is option. Chuck is optional. You ca CNC KINWA FLAT BED CNC LATHE CL-68x00 CL-68/CL-78 Series Swing 11, mm Between centers 00~7000mm Spindle bore 181, 255, 5, 5mm Spindle motor 60HP CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm

More information

TX-NR3030_BAS_Cs_ indd

TX-NR3030_BAS_Cs_ indd TX-NR3030 http://www.onkyo.com/manual/txnr3030/adv/cs.html Cs 1 2 3 Speaker Cable 2 HDMI OUT HDMI IN HDMI OUT HDMI OUT HDMI OUT HDMI OUT 1 DIGITAL OPTICAL OUT AUDIO OUT TV 3 1 5 4 6 1 2 3 3 2 2 4 3 2 5

More information

iml88-0v C / 8W T Tube EVM - pplication Notes. IC Description The iml88 is a Three Terminal Current Controller (TTCC) for regulating the current flowi

iml88-0v C / 8W T Tube EVM - pplication Notes. IC Description The iml88 is a Three Terminal Current Controller (TTCC) for regulating the current flowi iml88-0v C / 8W T Tube EVM - pplication Notes iml88 0V C 8W T Tube EVM pplication Notes Table of Content. IC Description.... Features.... Package and Pin Diagrams.... pplication Circuit.... PCB Layout

More information

Thin Film Precision Temperature Chip Resistor TPT 2013.xls

Thin Film Precision Temperature Chip Resistor TPT 2013.xls FEATURE Thin Film Passivity NiCr Resistor Very Tight Tolerance from ±0.01%. Extremely Low TCR from ±5ppm/ Wide R-Value Range Rated : 1/32W ~ 1W (0402 ~2512) Applications Medical Equipment Testing / Measurement

More information

Microsoft Word - AP1515V02

Microsoft Word - AP1515V02 Document No. Rev.: V0.20 Page: 1 of 9 Revision History Rev. DRN # History Initiator Effective Date V01 V02 Initial document 黃宗文 Add second package description 葉宗榮 2014/05/15 2015/09/08 Initiator: 雷晨妤 (DCC)

More information

001Contents

001Contents Selection Guide Inductions of types Selection guide Contents 002 003 Standard capacitive sensors DC series AC series 008 024 Special capacitive sensors High temperature series Ring series 029 035 Accessories

More information

进口防倾斜开关说明书进口防倾倒开关NKK开关进口防倒开关样本pdf资料进口倾斜开关

进口防倾斜开关说明书进口防倾倒开关NKK开关进口防倒开关样本pdf资料进口倾斜开关 进口防倾倒开关 N 开关北京 N 深圳 N 无锡 N 天津 N N 开关官网的进口倾倒开关说明书 Distinctive Characteristics DSA Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when

More information

8260

8260 ASCO Stainless Steel Spool Valves Manually Operated and Main Supply Reset Valves Pilot Operated 316L Stainless Steel Bodies 1/4" NPT 3/2 Features Ideal for oil and gas control panel applications Drop-in

More information

a) Rating and Characteristics Disk Type 05D *Rated Rated Peak Varistor Clamping Typ. cap. Series Part No. Rated Voltage Energy Rated Power Current(8 2

a) Rating and Characteristics Disk Type 05D *Rated Rated Peak Varistor Clamping Typ. cap. Series Part No. Rated Voltage Energy Rated Power Current(8 2 ZR NR Series (Radial type) Disk type general use ZR type (Low voltage) and NR type (Medium/High Voltage) are for protection of electronics and control eqiupments from surge and noise. 1. Features Superior

More information

Microsoft Word - VA REV.A.doc

Microsoft Word - VA REV.A.doc Data Sheet Customer: Product : Multilayer Chip Varistor - VA Series Size: 0402/0405/0508/0603/0612/0805/1206/1210/1812 /2220 Issued Date: 22-Jan-11 Edition : REV.A VIKING TECH CORPORATION 光頡科技股份有限公司 No.70,

More information

Microsoft Word - SWRH-B series of Shielded SMD Power Inductor.doc

Microsoft Word - SWRH-B series of Shielded SMD Power Inductor.doc Wire Wound SMD Power Inductors SWRH-B Series Operating Temperature: -25 ~+105 (Including self-heating) FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting

More information

Pin Configurations Figure2. Pin Configuration of FS2012 (Top View) Table 1 Pin Description Pin Number Pin Name Description 1 GND 2 FB 3 SW Ground Pin.

Pin Configurations Figure2. Pin Configuration of FS2012 (Top View) Table 1 Pin Description Pin Number Pin Name Description 1 GND 2 FB 3 SW Ground Pin. Features Wide 3.6V to 32V Input Voltage Range Output Adjustable from 0.8V to 30V Maximum Duty Cycle 100% Minimum Drop Out 0.6V Fixed 300KHz Switching Frequency 12A Constant Output Current Capability Internal

More information

History Universal Universal 1958Universal 1984Magnetek Magnetek Lighting Group Universal Technologies Lighting Energy Savin

History Universal Universal 1958Universal 1984Magnetek Magnetek Lighting Group Universal Technologies Lighting Energy Savin 220240V ELECTRONIC BALLAST History 1967 1947Universal Universal 1958Universal 1984Magnetek 1997 2001Magnetek Lighting Group Universal Technologies Lighting 1999 2002Energy Saving Incorporation P.2 Company

More information

HC20093A_2008

HC20093A_2008 Reliability Laboratory Page: 1 of 6 Date: March 5, 2008 KORENIX TECHNOLOGY., CO. FL 9, NO. 100-1, MIN-CHUAN RD. SHING TIEN CITY, TAIPEI, TAIWAN The following merchandise was submitted and identified by

More information

Microsoft Word - HC20138_2010.doc

Microsoft Word - HC20138_2010.doc Page: 1 of 7 Date: April 26, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

Microsoft Word - P SDV series.DOC

Microsoft Word - P SDV series.DOC 片式压敏电阻器 SDV 系列 Chip SDV Series Operating Temp. : -55 ~ +125 特征 SMD 结构适合高密度安装 优异的限压比, 响应时间短 (

More information

HC70044_2008

HC70044_2008 Page: 1 of 9 Date: July 10, 2008 KORENIX TECHNOLOGY CO., LTD. 9 F, NO. 100-1, MING-CHUAN RD., SHIN TIEN CITY, TAIPEI, TAIWAN The following merchandise was submitted and identified by the vendor as: Product

More information

FILTRON 1. DC AC AC 220V 50HZ 2. 1 1 1 3. / / / / 4. 1) 2 3 4 5 6 5. 6. 7. 8. 9. / 10. 1. 2. 3. 4. 5. 6. 7. DC AC FILTRON DC AC FILTRON DC 12V 12VDC D

FILTRON 1. DC AC AC 220V 50HZ 2. 1 1 1 3. / / / / 4. 1) 2 3 4 5 6 5. 6. 7. 8. 9. / 10. 1. 2. 3. 4. 5. 6. 7. DC AC FILTRON DC AC FILTRON DC 12V 12VDC D 2006 4 27 1 JY FILTRON 1. DC AC AC 220V 50HZ 2. 1 1 1 3. / / / / 4. 1) 2 3 4 5 6 5. 6. 7. 8. 9. / 10. 1. 2. 3. 4. 5. 6. 7. DC AC FILTRON DC AC FILTRON DC 12V 12VDC DC FILTRON AC 24VAC 24VAC AC 24VAC AC

More information

(Microsoft Word W Technical document for \300\366\304\313.doc)

(Microsoft Word W Technical document for \300\366\304\313.doc) 1/15 V ALTIS-3535-3W-W-V Technical Document Features...2 Application...2 Environmental Compliance...2 Absolute Maximum Ratings...3 Flux Characteristics (Tj=50, IF=700mA)...4 Mechanical Dimension...5 Pad

More information

CNC KINWA FLAT BED CNC LATHE CL-58x3000 CL-38/CL-58 Series Swing 660, 900mm Between centers 1000~6000mm Spindle bore 120,186,258,375mm Spindle motor 3

CNC KINWA FLAT BED CNC LATHE CL-58x3000 CL-38/CL-58 Series Swing 660, 900mm Between centers 1000~6000mm Spindle bore 120,186,258,375mm Spindle motor 3 CNC KINWA FLAT BED CNC LATHE CL-8x000 CL-8/CL-8 Series Swing 660, 900mm Between centers 00~6000mm Spindle bore 1,186,8,7mm Spindle motor 0,40HP 14 CL-8x00,00,00,000,4000 CL-8x00,00,000,4000,000, C L8/C

More information

Sosen SS-50R-36 LED Driver Spec Sheet

Sosen SS-50R-36 LED Driver Spec Sheet SPECIFICATION 50W LED DRIVER Issued date: January 20, 2013 REV: V1.0 Model: SS-50R Description: 50W AC to DC LED DRIVER Customer: Customer Approval Signature SHENZHEN SOSEN ELECTRONICS CO LTD WRITTEN CHECKED

More information

<4D6963726F736F667420576F7264202D2032303130C4EAC0EDB9A4C0E04142BCB6D4C4B6C1C5D0B6CFC0FDCCE2BEABD1A15F325F2E646F63>

<4D6963726F736F667420576F7264202D2032303130C4EAC0EDB9A4C0E04142BCB6D4C4B6C1C5D0B6CFC0FDCCE2BEABD1A15F325F2E646F63> 2010 年 理 工 类 AB 级 阅 读 判 断 例 题 精 选 (2) Computer mouse How does the mouse work? We have to start at the bottom, so think upside down for now. It all starts with mouse ball. As the mouse ball in the bottom

More information

Logitech Wireless Combo MK45 English

Logitech Wireless Combo MK45 English Logitech Wireless Combo MK45 Setup Guide Logitech Wireless Combo MK45 English................................................................................... 7..........................................

More information

热设计网

热设计网 例 例 Agenda Popular Simulation software in PC industry * CFD software -- Flotherm * Advantage of Flotherm Flotherm apply to Cooler design * How to build up the model * Optimal parameter in cooler design

More information

AS4610 Series QSG-EN_SC_TC R02.book

AS4610 Series QSG-EN_SC_TC R02.book Quick Start Guide 4/48-Port GE Data Center Switch AS460-0T AS460-0P AS460-54T AS460-54P. Unpack the Switch and Check Contents AS460-0T AS460-0P Note: The switch can also be installed on a desktop or shelf

More information

MAGNETIC CONTACTOR / SWITCH Functionalities and characteristics of Magnetic Contactor Configuration Composite magnetic switch (abbreviated as MS) is c

MAGNETIC CONTACTOR / SWITCH Functionalities and characteristics of Magnetic Contactor Configuration Composite magnetic switch (abbreviated as MS) is c http://www.seec.com.tw http://circuit-breaker.seec.com.tw 2014 MAGNETIC CONTACTOR / SWITCH N Series BREAKER & SWITCHGEAR SYSTEM MAGNETIC CONTACTOR / SWITCH Functionalities and characteristics of Magnetic

More information

目录 2

目录 2 Safety Protection Catalogue 2012/2013 Industrial Plug & Socket MAXTRIC circuit breaker Working with the world s electric specialist together @ 2 Technical Data Rated Voltage: AC 24, 42, 110, 127, 220,

More information

Resistors - All Resistors - Chip Resistors

Resistors - All Resistors - Chip Resistors THICK FILM CHIP RESISTORS 特性 (Features) 輕薄短小 : 小型輕量, 大幅縮小 PC 板面積及重量 Small size and ligtweight with size range per int'l standard 裝配性佳 : 外觀均勻精確, 易於裝配 Highly stable in auto-placement surface mounting application

More information

IEC A( ) B C D II

IEC A( ) B C D II ICS 13.120 K 09 GB 4706.1 2005/IEC 60335-1:2004(Ed4.1) 1 Household and similar electrical appliances- Safety General requirements IEC60335-1 2004 Ed4.1,IDT 2005-08-26 2006-08-01 IEC 1 2 3 4 5 6 7 8 9 10

More information

01CP-WX3030WNetc_CO_ENG.indd

01CP-WX3030WNetc_CO_ENG.indd Data Video Projector User s Manual (Concise) ModelS: 8928A/8930A/8931WA/ 8933W Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please

More information

History 97 97Universal Universal 98Universal 98Magnetek Magnetek ighting Group Universal Technologies ighting Energy Saving Incorporation

History 97 97Universal Universal 98Universal 98Magnetek Magnetek ighting Group Universal Technologies ighting Energy Saving Incorporation 00V EECTROIC BAAST History 97 97Universal Universal 98Universal 98Magnetek 997 00Magnetek ighting Group Universal Technologies ighting 999 00Energy Saving Incorporation P. Company Profile Universal ighting

More information

GLP-V2R3

GLP-V2R3 Latest Edit Date: 2017.10.06 Pages: 2 / 9 * Features & Application: * Product Identify: 1.Power supply PWM circuit input / output inductor 2.Power line noise suppression 3.DC-DC Converter 4.Shielding Structure

More information

TECHNICAL DATA Date 12/22/15 Series F21U F MOTOR SPECIFICATIONS Motor Design Applications Insulation Class Maximum Liquid Temp Frequency RPM Air Filled Effulent water Class B 0-40 C ( 32-104 F ) 60 HZ

More information

Important Notice SUNPLUS TECHNOLOGY CO. reserves the right to change this documentation without prior notice. Information provided by SUNPLUS TECHNOLO

Important Notice SUNPLUS TECHNOLOGY CO. reserves the right to change this documentation without prior notice. Information provided by SUNPLUS TECHNOLO Car DVD New GUI IR Flow User Manual V0.1 Jan 25, 2008 19, Innovation First Road Science Park Hsin-Chu Taiwan 300 R.O.C. Tel: 886-3-578-6005 Fax: 886-3-578-4418 Web: www.sunplus.com Important Notice SUNPLUS

More information

<4D6963726F736F667420506F776572506F696E74202D20C6F3D2B5BCB0B2FAC6B7BCF2BDE92DD6D0D3A2CEC420C1F5B9FAD3B1205BBCE6C8DDC4A3CABD5D>

<4D6963726F736F667420506F776572506F696E74202D20C6F3D2B5BCB0B2FAC6B7BCF2BDE92DD6D0D3A2CEC420C1F5B9FAD3B1205BBCE6C8DDC4A3CABD5D> 企 业 及 产 品 简 介 COMPANY & PRODUCTS INTRODUCTION 山 东 泗 水 康 得 新 复 合 材 料 有 限 公 司 SHANDONG SISHUI KANGDE XIN COMPOSITE MATERIAL CO., LTD. 集 团 概 况 KDXGROUP OVERVIEW 1 拥 有 两 大 产 业 群 : 预 涂 膜 和 光 学 膜 1. GROUP HAS

More information

(baking powder) 1 ( ) ( ) 1 10g g (two level design, D-optimal) 32 1/2 fraction Two Level Fractional Factorial Design D-Optimal D

(baking powder) 1 ( ) ( ) 1 10g g (two level design, D-optimal) 32 1/2 fraction Two Level Fractional Factorial Design D-Optimal D ( ) 4 1 1 1 145 1 110 1 (baking powder) 1 ( ) ( ) 1 10g 1 1 2.5g 1 1 1 1 60 10 (two level design, D-optimal) 32 1/2 fraction Two Level Fractional Factorial Design D-Optimal Design 1. 60 120 2. 3. 40 10

More information

LF31B5800P67-N08

LF31B5800P67-N08 FEATUES Multilayer monolithic construction yields high reliability Excellent solderability and heat resistance for either flow or reflow soldering Substantial EMI suppression over a wide frequency range

More information

HC80279_2007

HC80279_2007 Reliability Laboratory Page: 1 of 7 Date: August 31, 2007 TEMWELL CORPORATION 8F-1, NO. 51, SEC. 1, MIN SHENG E. RD., TAIPEI, TAIWAN The following merchandise was submitted and identified by the vendor

More information

G99T Dimensions of signal translator ± R ± Pin assignment of signal translator D-sub 9 pin definition

G99T Dimensions of signal translator ± R ± Pin assignment of signal translator D-sub 9 pin definition 70 G99T7-306 Linear Guideways PG Type Pin assignment of signal translator D-sub 9 pin definition for signal output connector (5V RS4/TTL) Pin No. signal I/O GND I DC5V I 3 O 8 O 4 O 7 O 6 SGND I output

More information

UL817 UL .. 7.1.13.. 15 17 19 21 24 26 28.30 Conductor Secureness Test UL817 (81.1 81.2) blade pin female contact Normal 13 Tightened 20 Reduced 5 18AWG 20 89 18AWG 8 36 1 dead weights tensile testing

More information

CANVIO_AEROCAST_CS_EN.indd

CANVIO_AEROCAST_CS_EN.indd 简 体 中 文...2 English...4 SC5151-A0 简 体 中 文 步 骤 2: 了 解 您 的 CANVIO AeroCast CANVIO AeroCast 无 线 移 动 硬 盘 快 速 入 门 指 南 欢 迎 并 感 谢 您 选 择 TOSHIBA 产 品 有 关 您 的 TOSHIBA 产 品 的 详 情, 请 参 阅 包 含 更 多 信 息 的 用 户 手 册 () 安

More information

r_09hr_practical_guide_kor.pdf

r_09hr_practical_guide_kor.pdf PRACTICAL GUIDE TO THE EDIROL R-09HR 3 4 PRACTICAL GUIDE TO THE EDIROL R-09HR 5 Situation 1 6 1 2 3 PRACTICAL GUIDE TO THE EDIROL R-09HR WAV MP3 WAV 24 bit/96 khz WAV 16 bit/44.1 khz MP3 128 kbps/44.1

More information

RF & MICROWAVE COMPONENTS

RF & MICROWAVE COMPONENTS MICROOT MICROWAVE CO., LTD. RF & MICROWAVE COMPONENTS WWW.MIC-ROOT.COM Catalogue 1. ABOUT MICROOT...3 2. Broadband 90/180deg Hybrid and Coupler...4 3. Broadband Power Divider... 13 4. Filter... 20 5. RF

More information

1

1 Application Chuck Instruction Manual Universal Ball Lock Power Chuck APPLICATION CHUCK PBL CHUCK (UNIVERSAL BALL LOCK POWER CHUCK) TABLE OF CONTENTS Keep this manual handy for easy reference as it will

More information

区 域 活 动 进 入 中 班 我 们 区 域 的 设 置 和 活 动 材 料 都 有 所 变 化, 同 时 也 吸 引 孩 子 们 积 极 的 参 与 学 习 操 作 区 的 新 材 料 他 们 最 喜 欢, 孩 子 们 用 立 方 块 进 行 推 理 操 作 用 扑 克 牌 进 行 接 龙 游

区 域 活 动 进 入 中 班 我 们 区 域 的 设 置 和 活 动 材 料 都 有 所 变 化, 同 时 也 吸 引 孩 子 们 积 极 的 参 与 学 习 操 作 区 的 新 材 料 他 们 最 喜 欢, 孩 子 们 用 立 方 块 进 行 推 理 操 作 用 扑 克 牌 进 行 接 龙 游 日 常 生 活 本 月 我 们 日 常 生 活 活 动 的 重 点 :1. 让 孩 子 养 成 良 好 的 生 活 习 惯, 注 重 生 活 细 节 如 : 在 换 好 鞋 子 后 能 将 鞋 子 整 齐 的 摆 放 进 鞋 架 坐 在 椅 子 上 换 鞋 正 确 的 收 放 椅 子 等 2 让 孩 子 有 自 我 照 顾 的 意 识 如, 让 孩 子 感 受 自 己 的 冷 热 并 告 知 老 师,

More information

Microsoft Word - template.doc

Microsoft Word - template.doc HGC efax Service User Guide I. Getting Started Page 1 II. Fax Forward Page 2 4 III. Web Viewing Page 5 7 IV. General Management Page 8 12 V. Help Desk Page 13 VI. Logout Page 13 Page 0 I. Getting Started

More information

Microsoft Word - 00 表紙1-L版-1.doc

Microsoft Word - 00  表紙1-L版-1.doc IDX-OM-H005-L 初 版 :2003 年 7 月 改 定 :2005 年 7 月 使 用 说 明 书 冷 冻 式 空 气 干 燥 器 IDF1E-10 IDF2E-10 IDF3E-10 IDF3E-20 IDF4E-10 IDF4E-20 IDF6E-10 IDF6E-20 IDF8E-10 IDF8E-20 IDF11E-10 IDF11E-20 本 使 用 手 册 对 本 公 司 生

More information

1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源

1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源 1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源 B. 啟 用 智 慧 型 裝 置 的 無 線 Wi-Fi C. 選 擇 無 線 網 路 名 稱 "edimax.setup"

More information

Product Type Batteries (only) Circuit Breatkers & Load Protection Connection Devices Contactors Ethernet Switches, Stratix Switches I/O Modules; PLC N

Product Type Batteries (only) Circuit Breatkers & Load Protection Connection Devices Contactors Ethernet Switches, Stratix Switches I/O Modules; PLC N 1201 South Second Street Milwaukee, Wisconsin U.S.A. 53204 Tel 414-382-2000 1 July 2016 RE: China Restriction of Hazardous Substances (RoHS) Dear Customer, Rockwell Automation is committed to demonstrating

More information

0402 Series Thin Film Chip Resistors

0402 Series Thin Film Chip Resistors Data Sheet Customer: Product: -W Series Sizes.: 0402/0603/0805/1008/1206 Issued Date: Edition: 23-Dec-16 REV.C6 VIKING TECH CORPORATION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou Township, Hsinchu County 303,

More information

xe c.pdf

xe c.pdf MITSUBISHI Industrial Sewing Machine Parts Catalog Model PLKE1010 CONTENTS Page A Construction 1 B C D E F G H J Arm bed & it s accessories 2 Arm bed & it s accessories 4 Sewing mechanism 6 Sewing mechanism

More information

TOYOGIKEN TOYOGIKEN TOYOGIKEN TOYOGIKEN 1 项 FIRST NUMBE 固体防护级别 PROTECTION AGAINIST SOLID 2 项 SECOND NUMBE 液体防护级别 PROTECTION AGAINIST LIQUIDS 1 项 IK CODE 外部冲击防护级别 PROTECTION AGAINIST MECHANICAL IMPACT

More information

Yuandong-hawks Ball valve cdr

Yuandong-hawks Ball valve cdr Yuandong 奉化市远东车辆部件有限公司 Fenghua Yuandong Auto Parts imited Company 奉化市哈克斯自动化设备有限公司 Fenghua awks Automatic Equipment imited Company igh Pressure Ball Valve igh pressure Ball valve is mainly used in the hydraulic

More information

αlpha-res1000 / αlpha-res1000 / Eutech Eutech Eutech Instruments Pte Ltd EUTECH INSTRUMENTS PTE LTD Blk 55 Ayer Rajah Crescent, #04-16/24, S

αlpha-res1000 / αlpha-res1000 / Eutech Eutech Eutech Instruments Pte Ltd EUTECH INSTRUMENTS PTE LTD Blk 55 Ayer Rajah Crescent, #04-16/24, S EUTECH αlpha-res1000 / Resistivity Controller αlpha RES1000 MEAS 18.20 1 25.0 M ATC ALARM REL A REL B REL A ENTER ESC AUTO MANU REL B αlpha-res1000 / αlpha-res1000 / Eutech Eutech Eutech Instruments Pte

More information

Our Mission ICAPlants has been working since a long time in industrial automation, developing specific solutions for many industrial purposes to satis

Our Mission ICAPlants has been working since a long time in industrial automation, developing specific solutions for many industrial purposes to satis Tyres Assembly Systems Our Mission ICAPlants has been working since a long time in industrial automation, developing specific solutions for many industrial purposes to satisfy Customers worldwide. Our

More information

: 205-03-311 5863 Series 0.35mm Pitch Board-to-Board Connector TABLE OF CONTENTS OUTLINE PART NAMES AND MODEL NUMBERS PART NAMES MODEL NUMBERS PRECAUTIONS IN HANDLING USING FOR BOARD-TO-BOARD CONNECTION

More information

TECHNICAL DATA Date 6/12/212 Series 5ASH21.5 AS MOTOR SPECIFICATIONS Motor Design Applications Insulation Class Maximum Liquid Temp Frequency RPM Air Filled Waste Water Class B -4 C ( 32-14 F ) HZ 345

More information

Product Type Batteries (only) Circuit Breakers & Load Protection Connection Devices Contactors Ethernet Switches, Stratix Switches I/O Modules; PLC Ne

Product Type Batteries (only) Circuit Breakers & Load Protection Connection Devices Contactors Ethernet Switches, Stratix Switches I/O Modules; PLC Ne 1201 South Second Street Milwaukee, Wisconsin U.S.A. 53204 Tel 414-382-2000 1 July 2016 RE: China Restriction of Hazardous Substances (RoHS) Dear Customer, Rockwell Automation is committed to demonstrating

More information

Specification For 46 Watts

Specification For 46 Watts SPECIFICATION FOR APPROVAL CUSTOMER : CUSTOMER P.N. : PRODUCT MODEL : JAMSP-ZA700IC72VO-050D PRODUCT NO. : MFT0057-NO SAMPLE DATE : 2013-06-01 CUSTOMER AUTHORIZED SIGNATURE Please return to us one copy

More information

WFC40810

WFC40810 9000086873 (PD 85 05 10) Operating and Installation Instructions Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items

More information