ET-T 说明书EUS.cdr

Size: px

Start display at page:

Download "ET-T 说明书EUS.cdr"

宥戊僪
6 years ago
Views:

1 智能人机界面整体解决方案供应商 Intelligent human-machine interface overall solutions supplier EUS 系统屏 EUS Display ET-T 用户手册

2 目录 contents 一. 硬件介绍 Hardware introduction 产品材质 Material 01 电源 power 01 通讯接口 communication interface 01 使用温度范围 Rang of temperature 01 硬件特性 Hardware characteristic 0 产品结构图 Product structure 其他功能 Elses 0 0 二. 软件介绍 Software introduction 丰富多彩的色彩显示 Richly colorfuldisplay 03 丰富的字体和图形 Rich fonts and graphics 03 多国语言显示与中文输入 Multi-language display and chinaese 03 强大的变量处理能力 Powerful variable processing capacity 04 通讯功能 Communication 04 软件特色 Features 05 可自由定制开机画面 Free set start-up screen 06 其他功能 Else 06

3 目录 contents 三. 总体性能描叙 The overall performance specification 显示性能参数电气性能参数 performance parameters of monitor electrical component performance parameter 工作环境和可靠性参数 The work environment and the reliability parameters 用户接口特性 User interface features 软件功能 Software function 四. 外接口说明 External interface specifications 10 五. 软件功能说明 Software function explanation 通信数据帧结构 Communication data frame structure 指令集 Instruction set 触控配置文件 Touch the configuration file 显示变量配置文件 Show variable control file 14 变量类型说明 Variable types that 15 SD 卡配置文件 SD card configuration file CONFIG.TXT 配置文件说明 CONFIG.TXT Profile description RB 位说明 RB Adescription 六. 外形尺寸 Overall dimensions 19

4 一硬件介绍 Hardware introduction v, 5 input, 01

5 一硬件介绍 Hardware introduction 10M M3 3M SDRAM 18M 10M M3 3M SDRAM 18M 0

6 二软件介绍 Software introduction 03

7 二软件介绍 Software introduction 04

8 二软件介绍 Software introduction 05

9 二软件介绍 Software introduction 06

10 三总体性能描述 Performance Parameters 显示性能参数 Displaying performance parameter 参数 parameter 数据 data 说明 Instructions 显示屏类型 Display Type TFT 分辨率 Resolution 800x480 可以配制成 480x800( 转 90 度模式 ) Can be made into 480 x800 (turn 90 degrees mode) 颜色 Color 65K(65536) 色 16bit 调色板 5R6G5B 16 bit 5R6G5B palette 显示尺寸 (A.A) Display Size(A.A) mmx67. mm 安装尺寸 (A.A) P roduct Size(A.A) mmx70. 8mm 触摸屏类型 Touchscreen type 电阻 ( 电容 ) 触摸屏 RTP(CTP) 触摸屏误差 Touch screen error +/-0.5% 运行中, 可以随时重新校准 Recalibration is run, can at any time 背光类别 Backlit category LED 亮度减半寿命不低于小时 Brightness in half life of not less than hours 背光亮度 Backlight Brightness 300nit( Typ) 64 级亮度可调触摸屏可以直接控制背光亮度和点亮时间 Adjustable brightness level 64 touch screen can directly control the backlight brightness and light time Sd 接口 SD Interface SD/ SDHC FA3 文件格式用于图片, 字库, 配置文件的下载升级 FA3 file format for images, character, the configuration file download upgrades RTC 精度 RTC accuracy 1s/ 4h 5 C 环境温度下 5 C Ambient temperature 其他硬件 Other hardware 蜂鸣器 Buzzer 可以软件控制铭叫点击有效触摸按键会自动伴音提示 Click software control inscription called the effective touch button will automatically sound prompt 07

11 三总体性能描述 Performance Parameters 电气性能参数 Electric performance parameters 参数 parameter 测试条件 Test condition 最小值 MIN 典型值 Typical value 最大值 MAX 单位 Unit 工作电压 Operating Voltage S5V ON S5V OFF V 4 V 工作电流 working current Vcc=1V, 背光开启 Vcc=1V, Backlit open Vcc=1V, 背光关闭 Vcc=1V, light- off ma ma 工作环境和可靠性参数 The work environment and the reliability parameters 参数 parameter 测试条件 Test condition 最小值 MIN 典型值 Typical value 最大值 MAX 单位 Unit 工作温度 Operating temperature Vcc=1V, 湿度 60% C 存储温度 Storage Temperature 工作湿度 Operating humidity - Ta=5C % 5 60% 85 90% C RH 三防处理 Three processing - - 有 - - 老化时间 Ageing time 5 C H ESD 防护等级 ESD protection grade 防护等级 Protection grade 其他认证 Other authentication IEC4 级 ( 接触和空气放电 ) IP65( 正面 ) CE, ROHS 08

12 三总体性能描述 Performance Parameters 用户接口特性 User interface features 参数 parameter 规格 Specification 工作电压 Operating Voltage DC6~4V,, 带电源反接保护 DC6~4V,with the power supply reverse interface power supply 功耗 power dissipation 串口模式串口电平 Serial mode Serial port level 用户连接端子 User terminals 3. 4W( 1V, 70mA) 全双工异步串口 /Full-duplex asynchronous serial port RS485 和 RS3/TTL UART( 用户下单请选择其中之一 ) 8pin_.00mm 接线端子软件功能 Software function 参数 parameter 规格 Specification 软件平台 Software platform 硬件寄存器空间 Hardware register space 用户变量存储空间 User variable storage space 尔泰 EUS 系统软件 56 Bytes 56K Bytes EUS system software 字库和图表库存储空间 Character and graph library storage space 3M Bytes 图片存储空间 Image storage space 180M 可以保存 34 幅全屏图片 180 m can save 34 full screen image 09

13 四外接口说明 External interface specifications J1 引脚 Pin J4 引脚 Pin 引脚名称引脚类型功能描叙 The name of the pin Pin Type Function 1,,3 1, GND P 电源地 power ground 6 3,4 DIN I 串口输出 (CMOS/RS3) Serial output (CMOS/RS3) 5 5 DOUT O 串口输出 (CMOS/RS3)Serial output (CMOS/RS3) 4 6 BUSY O 串口缓存区忙信号指示 (CMOS/TTL) ( C M O S / T T L )Serial buffer busy indicator 7 - NC NC NC 8,9,10 7,8 VIN P 电源输入 (+1V) Input Power J 引脚 Pin 引脚名称 The name of the pin 引脚类型 Pin Type 功能描叙 Function 1 GND P 电源地 power ground 485DATA+ O 串口数据 (RS485) (RS485) serial port data 3 485DATA- O 串口数据 (RS485) (RS485) serial port data 4 3TX O 串口输出 (CMOS/RS3) Serial output (CMOS/RS3) 5 3RX I 串口输入 (CMOS/RS3) Serial output (CMOS/RS3) 6 VIN P 电源输入 (+1V) (+1V)Input Power 10

14 五软件功能说明 Software architecture description 通讯数据帧架构 Communication data frame structure EUS 屏的串口数据帧由 4 个数据块组成, 如下表所述 : EUS screen serial port data frame is composed of four data blocks, described in the following table: 数据块 1 Data Block 定义 Definition 帧头数据长度指令数据指令和数据的 CRC 校验 Frame header Data length order Data CRC check instructions and data 数据长度 Data length 1 1 N 说明 Introductions CONFIG.TXT 配置文件的 R3:RA 定义 CONFIG. TXT CONFIG file of R3: RA definition 数据长度包括指令数据和校验 Data length including instructions, data, and checking 0x80-0x84 CONFIG.TXT 配置文件的 R 决定是否启用 The CONFIG. TXT R to determine whether to enable configuration file 一个数据包能够传送的大数据长度为 54 字节 ( 不要 CRC 校验 ) 或 5 字节 ( 带 CRC 校验 ).CRC 校验不包括帧头和数据长度, 仅针对指令和数据, 采用 ANSI CRC-16(X16+X15+X+1) 格式. Are capable of transmitting a packet large data length of 54 bytes (don't) CRC check or 5 bytes (with CRC check). The CRC check does not include the frame head and data length, only for instructions and data, using the ANSI CRC - 16 X16 (+ X15 + X + 1) format. 11

15 五软件功能说明 Software Function Specification 指令集 Bit 功能 Function 指令 Instruction 数据 Data 说明 Instructions 0x80 ADR(0x00-0xFF)+Data_Pack 指定地址写寄存器数据 The specified address register data 访问控制寄存器 0x81 ADR(0x00-0xFF)+RD_LEN(0x00-0xFF) 指定地址读 RD_LEN 字节寄存器数据读寄存器的 EUS 屏应答 The specified address byte read RD_LEN register data Read the register EUS screen response ADR(0x00-0xFF)+RD_LEN+Data_Pack 0x8 ADR_H:L(0x0000-0x6FFF)+DATA0 DATAn 指定地址开始写入数据串 ( 字数据 ) 到变量存储区 Specified address began to write data (data) to the variable storage area 访问数据存储器 0x83 ADR_H:L(0x0000-0x6FFF)+RD_LEN(0x00-0x7F) 从变量存储区指定地址开始读入 RD_LEN 长度字数据读数据存储器的 EUS 屏应答 Starting from the variable storage area specified address read RD_LEN word length data Read data memory EUS screen response ADR_H:L+RD_LEN+DATA0 DATAn 写曲线缓冲区 0x84 CH_Mode(Byte)+DATA0(Word)+ +DATAn 写曲线缓冲区数据 CH_Mode 定义了后续数据的通道排列顺序 : CH_Mode 的每个位 (bit) 对应 1 个通道 ; CH_Mode.0 对应 0 通道,.7 对应 7 通道 ; 位置 1 表示对应的通道数据存在 ; 数据按照低通道数据在前排列比如 CH_Mode=0x83( B), 表示后续数据格式为 : ( 通道 0+ 通道 1+ 通道 7)+ +( 通道 0+ 通道 1+ 通道 7) Write buffer curve data. CH_Mode defines the channel of the subsequent data sequence CH_Mode each bit (bit) corres ponds to a channel;ch_mode. 0 0 channel. 7 corresponding 7 channels:position 1 said the corresponding channel data: data according to the low channel data in the previous arrangement. 1

16 五软件功能说明 Software Function Specification 触控配置文件 Touch the configuration file 触控配置文件由 N 条按照页面配置的触控指令组成, 每条触控指令固定占用或者 64 字节存储空间一条触控指令由以下 6 部分组成 : Touch the configuration file by article N of a touch instructions according to the configuration page, each touch instruction fixed 16, 3, 48 or 64 bytes of storage space.a touch instruction consists of the following six parts: 序号定义数据长度说明 The serial number Define The length of the data Instructions 1 Pic_ID 页面 ID TP_Area 8 触控按钮区域 : 左上角坐标 ( Xs,Ys), 右下角坐标 ( Xe,Ye) 当 Xs=0xFFFF 时, 表示触发控制由 0x4F 寄存器的键码值触发, 此时 Ys_H 为设定的触发键码值 (Ys_L,Xe,Ye 值未定义, 可任意写 ); 由键码值触发时, 请把按钮按压效果设置为无效 Touch button areas: upper left coordinates (Xs and Ys), the lower right corner coordinates (Xe, Ye) when Xs = 0 XFFFF said trigger control triggered by key code value of 0 x4f registers, the Ys_H trigger key code for the set value (Ys_L, Xe, Ye value undefined, can be arbitrary write);when triggered by key code values, please put the button presses effect is set to null and void. 3 Pic_Next 目标切换页面,0xFF** 表示不进行页面切换. Switch target page, 0 XFF * * says not to switch from the page. 4 Pic_On 按钮按压效果图所处的页面,0xFF** 表示没有按钮按压效果 Button press the rendering of the page, * * said there was no button press 0 XFF effect 5 6 TP_Code TP_FUN 3 控键码 : 0xFF** 表示无效的键码 0xFE**( 或者 0xFD**) 表示触控功能按键, 比如 0xFE00 表示启动变量数据触摸屏录入 0xFE** 的功能按键可以由 R.3 设置成变量改变后是否自动上传,0xFD** 的功能按键始终禁止变量改变后自动上传 0x00** 表示触控键码, 用 ASCII 表示 ; 比如 0x0031 表示按键 "1" Control key code: 0 XFF * * said invalid key code * * * * (or 0 0 xfe XFD) said touch function keys, such as 0 xfe00 said to start the touch screen input variable data.0 xfe * * function keys can be set by the R.3 into whether the variable change after uploading, 0 XFD function keys always prohibited * * variables change automatically after upload. 0 x00 * * said touch key code, use ASCII representation;s 当 TP_Code=0xFE** 时, 用来对触控功能按键进行描述 When TP_Code = 0 xfe * *, to touch the key is described. 13

17 五软件功能说明 Software Function Specification 显示变量配置文件 Show variable configuration file 显示变量配置文件由 N 条按照页面配置的变量指令组成, 每条变量指令固定占用 3 字节存储空间每个页面固定分配 KB 或 4KB (0x0800 或 0x1000) 变量存储空间, 每个页面最多可以设置 64 或 18 个变量显示变量配置文件最大 MB, 可以配置最多 104 个页面相同类型的变量, 存储位置越靠后, 显示优先级越高一条显示变量配置指令由以下 6 部分组成 :Show variable configuration file consisting of N article according to the configuration page variable instruction, each variable instruction fixed 3 bytes of storage space.each page fixed allocation KB or 4 KB (0 x0800 or 0 x1000) variable storage space, and each page can set a maximum of 64 or 18 variables.show variable configuration file maximum MB, you can configure up to 104 pages.the same type of variable, the more storage location, shows that the higher the priority.a display variable configuration instruction consists of the following six parts: 序号定义数据长度说明 The serial number Define The length of the data Instructions 1 0x5A 1 固定 Fixed Type 1 变量类别 Variable categories 3 *SP 变量描述文件从 Flash 加载后存储到数据存储区的地址指针, 0xFFFF 表示不转存到数据存储区. Variable description file from Flash after loading the address pointer of stored in the data storage area,0 XFFFF said not archived to the data store. 4 Len_Dsc 变量描述内容的字长度 Variables describing the word length of the content 5 *VP 变量地址, 0x0000-0x6FFF, 有些无需指定地址的变量, 写 0x0000 即可当变量地址高字节为 0xFF 时, 本条指令将被取消 Address to variables. 0 x0000 x6fff 0, some don't need to specify the address variable, Write 0 x0000 can.when high variable address byte 0 XFF, this order will be cancelled. 6 Description N 当变量描述内容 When the variables describing the content 14

18 五软件功能说明 Software Function Specification 变量类型说明 Variable types that 类型 Type 功能 Function 备注说明 Descr 0x00 变量图标显示 Variable icon is displayed 0x01 动画图标显示 Animation icon is displayed 0x0 滑块刻度指示 The slider calibration instructions 图标变量 0x03 艺术字变量显示 Variable display art word Icon variable 0x04 图片动画显示 Animated picture 0x05 图标旋转指示 Icon turn indicator 0x06 位变量图标显示 A variable icon is displayed 0x10 数据变量显示 Variable data display 0x11 文本显示 Text display 文本变量 0x1 RTC 显示 RTC shows Text variables 0x13 0x0 时间变量显示实时曲线显示 Show time variable Real time curve display 0x1 0x 基本图形显示 Basic graphics display 列表显示 The list shows 图形变量 Graphic variables 0x3 进度条显示 The progress bar shows 15

19 五软件功能说明 Software Function Specification SD 卡配置接口 SD card configuration interface 文件类型 The file type 命名规则 Naming rules 举例 For example 说明 Instructions 图片文件 Image files 图片存储位置 +( 可选的 ) 文件名.BMP Image storage location + file name (optional). BMP 00 开机界面.BMP 00 boot interface. BMP 必须是和 EUS 屏分辨率相同的 16 位色 BMP 文件 Must be 16 and EUS screen resolution is same color BMP file. 字库文件 Font file 字库存储位置 +( 可选的 ) 文件名.BIN/HZK/DZK Word stock storage location + file name (optional). BIN/HZK/DZK 63_GBK1 汉字库.DZK 63 _gbk1. Chinese character DZK 可以由 TS3 字库提取软件生成 Can be extracted by the TS3 word stock software generated 图标库字库存储位置 +( 可选的 ) 文件名.ICO 41 图标库.ICO 工具箱 ICON 生成 Icon library Word stock storage location + file name (optional). ICO 41 icon library. ICO Toolbox "ICON" generated 专用字库 The special character 00*.HZK 00_ASC.HZK 工具箱 0 号字库生成 Toolbox "0 word stock" generated 输入法词库 Input method thesaurus 1*.BIN 1_PY_EUS.BIN 预装 pre-installed 变量初始化 The variable initialization *.BIN 变量初始化.BIN variable initialization. BIN 触控配置 13*.BIN 13 触控配置文件.BIN EUS 组态软件生成 Touch the configuration 13 touch the configuration file. BIN EUS configuration software is generated 变量配置 14 变量配置文件.BIN EUS 组态软件生成 14*.BIN Variable configuration 14 variable configuration file. BIN EUS configuration software is generated 硬件设置 The hardware configuration CONFIG. TXT CONFIG. TXT 16

20 五软件功能说明 Software Function Specification CONFIG.TXT 配置文件说明说明 Instructions EUS 屏驱动模式选择, 配置错误会导致显示异常, 用户不要配置. EUS screen drive mode selection, configuration errors can lead to display abnormal, users don't configuration. 波特率设置, 0 x x 1 0 对应 b p s b p s R1 0x00 0x01 0x0 0x03 0x04 0x05 0x06 0x07 0x08 波特率 1.K.4K 4.8K 9.6K 19.K 38.4K 57.6K 115.K 8.8K R 1 0 x x 0 A 0 x 0 B 0 x 0 C 0 x 0 D 0 x 0 E 0 x 0 F 0 x x 1 1 波特率 76.8K 6.5K 15K 50K 30.4K 345.6K 691.K 91.6K 自定义 Baud rate Settings, 0 x00-0 x10 corresponds to 100 BPS to BPS R1 0 x00 0 x01 0 x0 0 x03 x04 x07 x06 x x08 Baud rate 1. K,.4 K, 4.8 K, 9.6 K, 19. K, 38.4 K, 57.6 K, 115. K to 8.8 K R1 x x0a x0b x0e x0d x0c x0f to 0 x10 0 x11 Baud rate 76.8 K, 6.5 K, 15 K, 50 K, 30.4 K, K, 691. K, 91.6 K custom SYS_CFG 配置字, 按位 (bit) 定义, 说明如后 SYS_CFG configuration characters, bitwise (bit) is defined, such as after. UART_SYNC_H 串口帧头高字节 UART_SYNC_H frame head high byte serial port EUS 屏驱动模式选择, 配置错误会导致显示异常, 用户不要配置 EUS screen drive mode selection, configuration errors can lead to display abnormal, users don't configuration. When R1 = 0 x11, the high byte of baud rate configuration word.r5: R9 = / users to customize the baud rate.set BPS baud rate, for example, R5: R9 = /10000 = 65 = 0 x071 R5 = 0 R9 = 71 触摸屏控制背光启动后, 点击触摸屏后背光点亮亮度 The touch screen control backlit, click touch screen backlight after light brightness 触摸屏控制背光启动后, 一段时间不点击触摸屏, 背光关闭的亮度 Touch screen control backlit starts, for a period of time don't click on the touch screen, the brightness of the backlight close 触摸屏控制背光启动后, 触摸屏背光点亮时间, 单位为 1.0 秒 Touch screen backlight control, touch screen backlight light time, unit for 1.0 seconds UART_SYNC_L UART_SYNC_ 串口帧头低字节按位 (bit) 定义, 说明如后当 R1=0x11 时, 波特率配置字的低字节 17

21 五软件功能说明 Software Function Specification RB 位说明 A description 0= 点击触摸屏后, 松开触摸屏时, 自动上传 0x7 指令, 触控模式下必须设置为 0 1= 点击触摸屏后, 离开触摸屏时, 不上传 0x7 指令 0 = after click on the touch screen, loosen the touch screen, automatic upload 0 x7 instructions, touch mode must be set to 0. 1 = after click on the touch screen, leaving the touch screen, do not upload 0 x7 instructions. 坐标回传模式下 : 0= 点击触摸屏后, 会以 100ms 的间隔定时自动上传 0x73 指令, 直到触摸屏松开 1= 点击触摸屏后, 只会在按下时自动上传 1 次 0x73 指令触控模式下, 并且 Para1.0=1: 0= 点击触摸屏后, 会以 100ms 的间隔定时自动上传 0x79 指令, 直到触摸屏松开 1= 点击触摸屏后, 只会在按下时自动上传 1 次 0x79 指令 Coordinates back mode: 0 = after click on the touch screen, with 100 ms interval timing automatically upload 0 x73 instructions, until the touch screen to loosen. 1 = after click on the touch screen, it will only upload automatically when press the 1 0 x73 instructions. Touch mode and Para1.0 = 1: 0 = after click on the touch screen, with 100 ms interval timing automatically upload 0 x79 instructions, until the touch screen to loosen. 1 = after click on the touch screen, it will only upload automatically when press the 1 0 x79 instructions. 0= 点击触摸屏后, HMI 不进行触控界面的切换 1= 点击触摸屏后,HMI 自动按照 0x1E 配置文件的要求进行触控界面的切换 0 = after click on the touch screen, HMI touch interface switching. 1 = after click on the touch screen, HMI automatically according to the requirements of 0 x1e configuration file to switch from the touch interface. 0= 背光不受触摸屏或键盘控制 1= 背光由触摸屏或键盘控制, 同时用户也可以通过 0x5E/0x5F 指令强制开关 0 = backlight is not controlled by the touch screen or keyboard 1 = backlit by the touch screen or keyboard control, at the same time, the user can also forced switch by 0 x5e / 0 x5f instructions. 0= 触摸屏或按键有蜂鸣器伴音 1= 触摸屏或按键无蜂鸣器伴音 0 = touch screen or buttons have buzzer sound.1 = no buzzer sound touch screen or buttons. 0= 0 显示 1= 偏转 90 显示 0 = 0 display.1 = 90 deflection display. 0= 触控模式下, 蜂鸣器伴音一直开启 1= 触控模式下, 蜂鸣器只有在点击有效位置时鸣叫一次 0 = touch mode, the buzzer sound has been open. 1 = touch mode, the buzzer only sing once when clicking the effective position.0 触控模式下 :0= 不上传 0x79 指令 1= 上传 0x79 指令 Touch mode: 0 = do not upload 0 x79 instructions upload 1 = 0 x79 18

22 六外形尺寸 Overall dimensions 19

23 智能人机界面整体解决方案供应商 Intelligent human-machine interface overall solutions supplier COM

ET 说明书.cdr

ET 说明书.cdr 智能人机界面整体解决方案供应商 Intelligent human-machine interface overall solutions supplier EUS 系统屏 EUS Display ET-T640480-05607 用户手册目录 contents 一. 硬件介绍 Hardware introduction 产品材质 Material 01 电源 power 01 通讯接口 communication