PRODUCT SPECIFICATIONS

Size: px

Start display at page:

Download "PRODUCT SPECIFICATIONS"

盈岸汤
6 years ago
Views:

1 TOP-ASIA ELECTRONICS GROUP SPECIFICATION FOR APPROVAL PRODUCT 5Vdc 2000mA SPS MODEL SW EK PART NO. SW EK VER: A CUSTOMER PWK DATE 本电器符合 AC PIN: 2 MEETSAFETYSTD., MEET ROHS MEET CEC STD. 希望回签日 /EXPECTED FEEDBACK BEFORE: 2013 年 6 月 30 日发行印 * 未签回而下订单即视同认可! 生产工厂 /MANUFACTOTRY 设计师 / 日期 DESIGNED BY 设计验证 / 日期 DESIGN VERIFIED BY 工程确认 / 日期 Engineering Verification BY QE 验证 / 日期 QE VERIFIED BY TAE SHENZHEN TOP-ASIA ELECTRONICS CO.,LTD. 地址 : 深圳市宝安区西乡后瑞新瑞物流园 B 栋三楼 Add:3F//A&B.XinRui Logistics pack,hourui,huangtian,xixiang Town,Baoan,Shenzhen,P.R.C. 业务联系 : 채선국 (CAI SEON GUK) hdt7451@hanmail.net Tel : P.C: Fax: Page 1 of 17

2 UPDATE REV Will you please sign one copy of the specifications as having your approval and return it to us for our records. We would like to point out that your release is directly influencing our bulk production start-up date. If we do not hear from you within 14 days from the date of the most recent revision, we will assume your acceptance. REV UPDATE Detail DATE A FIRST Rev.: A Page 2 of 17

3 Index 1. Scope 4 2. Electrical Characteristics test Input Characteristic Input Voltage and Frequency Input current Ac inrush current Input leakage current Efficiency Stand-by power consumption Output Characteristic Output voltage and current Output leakage current Startup and Turn-on Delay Overshoot Short-Circuit Protection (SCP) Over Current Protection (OCP) Over Voltage Protection (OVP) Loop Stability EMC-Specification Safety details: Mechanical Specifications Physical Input and Output Configuration. 6 附页 : 6. DC Cord 1 7. Production of appearance drawing Label 1 9. PE BAG Packing BOM...2 Rev.: A Page 3 of 17

4 1 Scope: This document describes power supply unit for the I.T.E.. This document covers all electrical, mechanical, environmental and testing aspects of the power supply unit. The power supply unit must comply with all of the requirements of this specification and the drawings and specifications referenced here in. 2 Electrical Characteristic test: 2.1 Input Characteristics: Input Voltage and Frequency The power supply shall meet all specifications when powered from the following sources. Voltage Range Line Frequency Minimum Voltage Maximum Voltage Vac 47 ~ 63 Hz 90Vac 264 Vac Input Current The maximum input current shall be less than 1.5A AC Inrush Current Peak inrush current shall be limited to 30A within 10ms at 264Vac(Cold Start) Input Leakage Current The leakage current shall not exceed 0.25 ma Efficiency 56% Minimum Stand-by power consumption 0.5W Max At AC nominal input@output min load Rev.: A Page 4 of 17

5 2.2 Output Characteristics: Output Voltage and Current The power supply shall have one regulated DC output of +5V. The table below defines the total regulation band for the output, which includes line regulation, load regulation, transient response, and effects due to environmental conditions and aging. Voltage shall be measured at the power supply output connector Mode Output Current Range Output Voltage range Ripple Noise Min. Max. Min. Max. Max. C.C. 0mA 2000mA 4.7V 5.3V 80mVpp Ripple & Noise Test: Add 0.1uF/50V ceramic capacitor and 10uF/50V capacitor across the output terminal.measured with 20MHz Bandwidth Oscilloscope. Line regulation:<1% Output Leakage Current With the A/C input unplugged, apply a 5V D/C source to the output as specified, The leakage current drawn from the D/C source should be less than 100uA Startup and Turn-on Delay Power supply shall be able to start up into a resistive load up to the maximum rated current with maximum load capacitance of 1,000uF. The elapsed time between the application of input power and the attainment of output voltage to the nominal value shall not exceed 1 second Overshoot At turn on, the output voltage shall not exceed steady state by more than 10% Short-Circuit Protection 5.0W Max Auto recovery Over Current Protection 6.5A Max OCP Method :Auto recovery Over Voltage Protection 10V Max OVP Method: Voltage limit Loop Stability The output shall remain stable for all input and output conditions stated in Rev.: A Page 5 of 17

6 3 EMC-Specification Noise-suppressed acc: EN Safety details: Standards/class : EN60950 ClassII Voltage rating input : 100Vac-240Vac 50-60Hz Output : 5Vdc 2000mA Separation (prim-sec) : galvanic, via transformer Creepage distance : >= 8.0mm And air path : >=6.0mm High-voltage test : >=3.0KV Leakage current : Maximum leakage current is10ma Application range : Information technology equipment Including electrical business equipment Ambient temperature : 0 C to +40 C, 10 to 90% rhd 5 Mechanical Specifications 5.1 Physical Case material: Dimensions: PC 75mm(L) x 30mm(W) x 42mm(H) (not include input pins) 5.2 Input and Output Configuration Input Pin: Output Connector: Polarity: Lead: EK pins 3.5*1.35*10mm H type 音叉带沟槽 Center positive 1.5m AWM AWG Rev.: A Page 6 of 17

7 SR 80± Customer: 6 DC Cord drawing(black): 2.1 音叉带沟槽 WIRE:AWM AWG DC PLUG:Φ5.5*2.1*10mm COLOR:BLACK Rev.: A Page 7 of 17

8 7 Production of appearance drawing(black): COLOR:BLACK Rev.: A Page 8 of 17

9 8 Label: 备注 : 铭牌颜色 : 灰底黑字. Rev.: A Page 9 of 17

10 POWER-TEK Customer: 02 >PE-HD< 正面印字反面印字 NOTE: 1. 材质 :PE 材质 2. 厚度 :0.03mm 3. 颜色 : 透明 4. 印字颜色 : 黑色 THIRD ANGLE PROJECTION 第三角法版面 SHEET SIZE A4 材质 MATERIAL 0.04 PE 薄膜比例 SCALE 单位 UNIT mm 齐亚圣电子有限公司 TOP-ASIA ELECTRONICS CO.,LTD 承认 APPROVED 确认 CHECKED 检图 CHECKED 制图 DRAWING L <4 4<L <20 公差 TOLERANCE 图名 NAME PE 袋图页码 PAGE 1/1 杨竣翔 20< L <50 50< L < < L 图号 DWG. NO. 日期 DATE 06/20.13 Rev.: A Page 10 of 17

11 深圳市齐亚圣电子有限公司使用机种备注 : 1. 纸箱材质为 A=A 2. 外箱尺寸为外部尺寸, 公差为 :+5,-0. 料号品名 2 外箱设计审核规格核准单位 mm 尺寸 A4 版本 A 日期 Customer: 抗张力 14 公斤 /cm 3. 装箱方式 : 100PCS/ 箱 Rev.: A Page 11 of 17

12 刀卡 ( 短 ) 隔板刀卡 ( 长 ) 备注 : 袋 3. 隔板 505*465*5mm B=B 深圳市齐亚圣电子有限公司尺寸版本使用机种料号品名规格日期 A4 A Customer: 1. 刀卡 ( 长 )505*160*5 11 刀口 2. 刀卡 ( 短 )465*160*5 6 刀口设计审核核准单位 mm Rev.: A Page 12 of 17

13 深圳市齐亚圣电子有限公司地址 : 深圳市宝安西乡街道后瑞工业区 B 栋 3 楼 Tel: , Fax: 产品 BOM 资料表产品编号 : SW EKD8 产品名称 : 5V 2A D8 版本立式电源适配器 (KR030 带灯 ) 展开阶数子件编号子件名称子件用量耗损率位号 1 A 环保 1.0mm 无铅锡线 sn99.3cu KG 0.3% 1 A 环保宽 55mm 厚 0.05 封箱胶 M 0.3% 1 A F0 环保 AP-688 硅胶公斤 0% 1 C 外箱 L520*W480*H185mm A=A 外销 0.01PCS 0.3% 箱带 POWER-TEK 印字 1 C 标贴 5V2A(EK 灰底黑字 ) 1PCS 0.3% CASE 1 C03FRQCPASS0 QC PASS 易碎贴 ( 周期颜色变换 ) 1PCS 0.3% φ15mm 1 C PE 袋 160*120*0.06mm 120mm 单面开 1PCS 0.3% 口加孔印可 " 回收 " 标示和 made in china 带 POWER-TEK 字样 1 C 短 6 刀卡长 465* 宽 160* 厚 5mm B=B 0.11PCS 0.3% 1 C 长 11 刀卡长 505* 宽 160* 厚 5mm B=B 0.06PCS 0.3% 1 C 长 505* 宽 465* 厚 5mm 隔板 B=B 0.02PCS 0.3% 1 ESA 长 30* 宽 8* 厚 5.5mm 防火海棉单面贴 1PCS 0.3% PCB 锡面 1 EWDCB10055C3 红色导线 UL1007/22#0.16/17 总长 2PCS 0.3% 55mm 9/3.5mm 镀锡 V AC 1 EWJCB21535S2 DC 线 5.5*2.1*10mm 音叉直头带出台 1PCS 0.3% V+,V- UL # 印字 20#0.16/17 24W SR L= mm OD=3.8mm 1 PCDS05020V17 PCB TAE13.5W 5V2A 插件 OK 板 1PCS 0% 带灯 2 A 环保无铅纯锡条 KG 0% PCB 波峰焊接 2 A0300TF88701 环保无铅 TF-88-7 消光型助焊剂 L 0% PCB 波峰喷雾 2 ECA102DM1CJ0 高压瓷片电容 102M/1KV Y5P( 蓝色 ) 1PCS 0.3% C6 L=3.5±0.4mm 2 ECA104DM1XL1 X 电容 104M/275VAC L13*W6*H12mm 1PCS 0.3% CX1 P=10MM L=3.5±0.4mm 2 ECA108DM1000 电解电容 LOESR 1000UF/10V 1PCS 0.3% C7 Φ8*12mm L=3.5±0.2mm 2 ECA222DM1CJ0 高压瓷片电容 222M/1KV Y5P( 蓝色 ) 1PCS 0.3% C2 L=3.5±0.4mm 2 ECA222DM1YE0 Y1 电容 222M/400V Y5V P=10MM 1PCS 0.3% CY1 L=3.5±0.4mm 2 ECA227DM1020 电解电容 LOESR 220UF/16V 1PCS 0.3% C8 φ6*12mm L=3.5±0.2mm 2 ECA336DM1DE0 电解电容 33UF/400V φ13*20mm 1PCS 0.3% C1 2 ECA476DM1050 电解电容 LOESR47UF/35Vφ5*11mm 1PCS 0.3% C3 L=3.5±0.2mm 2 ECAHS 热缩套管 φ 1*7mm( 长圆套管 ) 1PCS 0.3% C1+ 2 ECAHS 热缩套管 φ 6*14mm( 长圆套管 ) 1PCS 0.3% FOR F1 2 EDIDDL4148T0 编带二极管 1N4148 DO-35 1PCS 0.3% D6 2 EDIDDN4007T0 编带 52mm 整流二极管 1N4007 DO-41 5PCS 0.3% D1-D5 2 EDIDTSB540T0 编带肖特基二极管 SB540 DO-201 1PCS 0.3% D7 5A/40V 2 EDILER3000D0 LED 红色普亮雾状 φ3mm 1PCS 0.3% LED 2 EFUT 保险管 1A/250V Ф3.6*10 慢断带引脚 1PCS 0.3% F1 2 EICUCR6203D0 CR6203 IC DIP-8 1PCS 0.3% IC1 2 EICUPC817CD0 光耦 PC817C DIP-4 1PCS 0.3% IC2 2 EICUUTC431D1 控制 IC UTC431±0.5% TO-92 1PCS 0.3% IC3 2 EINLC15A0750 电感 DR3*12φ0.75*8.5TS 1-2uH 1PCS 0.3% L1 L=4.5±0.5mm Rev.: A Page 13 of 17

14 2 EINLS 电感 UU9.8 立式 φ0.2*140ts 50mH 1PCS 0.3% LF1 min 2 EJU C0 跳线 φ 0.6*4mm L=5±0.3mm 1PCS 0.3% R16 2 ERE1003TDFC0 F 形碳膜电阻 100K±5% 1W 1PCS 0.3% R4 2 ERE1504TBFC0 编带碳膜电阻 1M5±5% 1/4W 1PCS 0.3% R3 2 ETRH 变压器 EF-20 5V/2A 加屏蔽 1PCS 0.3% T1 2 PCSS05020V17 PCB TAE13.5W 5V2A SMT OK 板 1PCS 0% 带灯 3 ECA102SK1S63 贴片电容 0805/102/50V ±10% X7R 1PCS 0.3% C10 3 ECA223SK1S63 贴片电容 0805/223/50V ±10% X7R 1PCS 0.3% C5 3 ECA474SK1S63 贴片电容 0805/474/50V ±10% X7R 1PCS 0.3% C9 3 ECA681SK1S63 贴片电容 0805/681/50V ±10% X7R 1PCS 0.3% C4 3 ERE0000SBF14 SMD1206 电阻 0R±5% 印字 0 2PCS 0.3% RJ1,RJ3 3 ERE0100SBF14 SMD1206 电阻 10R±5% 印字 100 1PCS 0.3% R8 3 ERE0120SBF14 SMD1206 电阻 12R±5% 印字 120 1PCS 0.3% R7 3 ERE024ASBF14 SMD1206 电阻 2R4±5% 印字 2R4 1PCS 0.3% R5 3 ERE030ASBF14 SMD1206 电阻 3R±5% 印字 3R0 2PCS 0.3% R6,R20 3 ERE0331SBF14 SMD1206 电阻 330R±5% 印字 331 1PCS 0.3% R15 3 ERE1001SAF13 SMD0805 电阻 1K±5% 印字 102 3PCS 0.3% R9,R11,R14 3 ERE1001SBF14 SMD1206 电阻 1K±5% 印字 102 1PCS 0.3% R19 3 ERE1004SBF14 SMD1206 电阻 1M±5% 印字 105 2PCS 0.3% R1,R2 3 ERE3300SAF13 SMD0805 电阻 330R±5% 印字 331 1PCS 0.3% R10 3 ERE3301SAD13 SMD0805 电阻 3K3±1% 印字 PCS 0.3% R12 3 ERE3601SAD13 SMD0805 电阻 3K6±1% 印字 PCS 0.3% R13 3 PCBSTAE13V10 PCB TAE-13.5W 94V0 1.2mm 1PCS 0.3% 1 PLB12WYKCAB1 下盖 PC12W 立式 KC 黑色铜脚 1PCS 1% 下盖 1 PLT12WYTTAB2 上盖 12W 立式黑色带孔 1PCS 1% 上盖 Rev.: A Page 14 of 17

15 Rev.: A Page 15 of 17

16 Rev.: A Page 16 of 17

17 Rev.: A Page 17 of 17

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS TOP-ASIA ELECTRONICS GROUP SPECIFICATION FOR APPROVAL PRODUCT 9Vdc2000mA SPS MODEL SW18-09002000-EK PART NO. SW18-09002000-EKB1 VER: A CUSTOMER PWK DATE 20130726 本电器符合 AC PIN: 2 MEETSAFETYSTD., MEET ROHS