Size: px
Start display at page:

Download ""

Transcription

1 Dental Light Model AL-711M Model AL-712M Model AL-715M INSTALLATION AND OPERATION INSTRUCTIONS IMPORTANT After installation is completed, check all the bolts, screws and fasteners to confirm that they are securely fastened. R

2

3 TABLE OF CONTENTS [1] SPECIFICATIONS... 1 [2] CLASSIFICATION... 1 [3] WIRING DIAGRAM... 2 INSTALLATION INSTRUCTIONS [4] UNIT MOUNT TYPE... 3 [5] CEILING MOUNT TYPE... 5 [6] TRACK MOUNT TYPE... 7 OPERATING INSTRUCTIONS [7] OPERATION [8] ADJUSTMENTS [9] HALOGEN BULB REPLACEMENT [10] CLEANING,MAINTENANCE PARTS & DISPOSAL [11] MAINTENANCE AND INSPECTION Intended Use of the Product This product is intended for the exclusive use for diagnoses, treatments and relative procedures of dentistry, and must be operated or handled by the qualified dentists or by dental staffs under the supervision of the dentist. Such dentists or dental staffs should instruct and/or assist the patients to approach to and leave from the product. Patients should not be allowed to operate or handle the product unless he/she is so instructed. Symbols Caution It means caution, warnings, or possibility to danger. Type B Applied Parts Manufacturer Environmental condition for Operation Temperature : 41~104F (5 ~ 40 ) Humidity : 10 ~ 80% Pressure : 8.7~15.4 psi (600 ~ 1060 hpa) Environmental condition for Storage Temperature : 14~122F ( -10 ~ 50 ) Humidity : 10 ~ 80% Pressure : 8.7~15.4 psi (600 ~ 1060 hpa) Environmental condition for Transportation Temperature : 14~122F (-10 ~ 50 ) Humidity : 10 ~ 80% Pressure : 8.7~15.4 psi (600 ~ 1060 hpa)

4 WARNING To avoid the risk of electric shock, this equipment must only be connected to supply mains with protective earth Lamp cover becomes very hot during use.to avoid burning fingers, do not a touch lamp cover. Position a light head by holding light handle(s). Installation and service work should be conducted by an authorized installation/service personnel only. Always put a lamp cover on to avoid burning fingers. WARNING: The followings are prohibited. To modify this equipment. To use the equipment under any failure condition. To use the equipment without doing the daily and periodical check-up. To wipe the plastic covers with any disinfectant or detergent that contains organic solvent. Precautions for Installation Assure that the ceiling and/or framing can provide the 70 lb. (31.5kg) of dead weight capacity and the additional force of movement and positioning of the light. Keep the equipment away from water. Keep in circumstances safe from influence by temperature, humidity, wind, sun light, air containing salts and minerals. Care about stability such as inclination, vibration and impact, including handling and transportation. Do not keep the equipment in a place where chemicals are or where gas is emitted. During lifting and unpacking of the light, make sure to hold only the designated parts. Do not drop or hit the light. Do not connect to power supply other than AC120V 60HZ. Ground light properly prior to turning power on. When the installation process has been completed, verify that all the mechanical and electrical functions are working properly. Thick gloves are highly recommended at unpacking. Do not modify this equipment. CAUTION Before use Check connection of switches and make sure that the device functions properly. Make sure that grounding wire is connected. Make sure that cables are properly and perfectly connected.

5 During use CAUTION Do not use the light longer than required for examination or treatment. Always watch the patient and the equipment to make sure nothing is wrong. If anything wrong is observed with the equipment or the patient, take a proper action, such as stopping the use of equipment as well as keeping the patient in safe. Keep an eye on the patient not to touch the equipment. After use Turn off the light. Clean the equipment and get it ready for use. CAUTION Do not spray liquids directly onto light surfaces. In order to prevent damage to electrical components and systems, do not apply excess cleaning solution onto light surfaces. NOTE Warranty does not cover damage to equipment caused by disinfectant solutions Replacement of parts (Except the Bulb and Lamp cover) Replacement must be done by an professional technician(s) of our company or a company authorized by us. [1] SPECIFICATIONS 1. Focal Distance " 2. Color Temperature...4,200 Kelvin at 2,600 FTC 3. Light Intensity... High : 2,600 FTC Low : 1,670 FTC Composite Mode : 740 FTC 4. Light Pattern...8.7" x 3.3" at 29.9" 5. Power Requirement...AC. 120 V 60 Hz 0.53A 6. Bulb Type...Tungsten Halogen Type (JA 12-55WD/DL8) [2] CLASSIFICATION a. Protection against electric shock : Class I Equipment, Type B Applied Parts b. Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide

6 [3] WIRING DIAGRAM 3-1. AL-711M (Unit Mount Type) 3-2. AL-712M (Ceiling Mount Type) 3-3. AL-715M (Track Mount Type) - 2 -

7 24 [4] UNIT MOUNT TYPE (AL-711M) 4-1. Dimensions Inches 25-1/2 11/ / /8 8-5/ /8 12-1/ / Installation Instructions Assembling the head Assembling the head with the balance arm per the following instruction will be needed. 140 All necessary parts are included in the carton box. M3 x 6 Painted Screw... 4pcs. Yoke Cover... 1pce. M5 x 10 Painted Screw... 2pcs. 1) Install the light head to balance arm with two M5 x 10 painted screws. 2) Connect the wire harness. 2P connector:orange/ red from balance arm to orange/red wire from yoke cover (same color to be met at each side of connector.) 2P connector:brown/blue from balance arm to white/white from light head. Light Head Balance Arm M5x10 Painted Screws(2) Yoke Cover M3x6 Painted Screws(4) 1P connector : black wire from yoke cover to white wire from light head 3) Attach the yoke cover with four M3 x 6 painted screws

8 Mounting model AL-711M onto a light pole 1) Slide power cord through the pole adapter as shown in FIGURE 1. 2) Pull power code through light pole. (a pull string may be helpful for this operation) 3) Mount light and pole adapter onto the light pole. 4) Attach a hospital grade plug (in Canada, CSA 5-15 Hospital Grade Plug ) to power code end. This is to be installed by a licensed electrician only, in accordance with the National Electrical Code(in the USA) or Canadian Electrical Code(in Canada), and local electrical codes as applicable. 5) Remove arm locking key (save for possible future shipment). 6) To convert to left-hand operation (See FIGURE 2.): 1. Remove Right/Left Hand Operation Screw below H-bracket (as shown). 2. Rotate H-bracket to other position and reinsert screw (loosen large upper & lower screws to help in moving bracket. WARNING Do not rotate the swing-arm more than 360. Doing so may cause a breaking of wire. H-Bracket Left Hand Operation Screw-Hole Plastic Light Pole Bushing (not incluided) Loking key Right Hand Operation Screw-Hole Pole Adapter Pole (not included) Power Code Hospital Grade Plug (not included) In this figure the connecting section of swing arm and balance arm are shown from the BOTTOM FIGURE 1 FIGURE 2-4 -

9 [5] CEILING MOUNT TYPE (AL-712M) 5-1. Dimensions Inches 94-1/2 - Max.120-1/2 21-1/2 - Max.47-1/2 1-9/16 3-9/ /16 1-3/ /8 8-5/ /8 12-1/ / /16 C C 18" 12" 140 Location of Light Mount (Ceiling) in Reference to Chair Position 5-2. Installation Instructions 1) Secure mounting plate to the ceiling,using the parts which will give the equipment a enough structural strength. 2) Route the power supply cable (1) through the center of the mounting plate(2). 3) Insert the suspension tube(8) into the ceiling flange and secure with roll pin(9) and set screws(7) supplied. 4) Use a level to make certain suspension tube is plumb. 5) Slide the flange cover(11) and flange cover ring(12) (flat side up) over the suspensi on tube and secure about half way up the tube. Use only one set screw(13) as you will be moving this on final installation. 6) Install the light assembly to the suspension tube by first running the 3 wire cord from the light up through the suspension tube to the ceiling flange. Secure light assembly to suspension tube with 4 Allen set screws. 7) Connect the power supply cable to the 3 wire cord from the light assembly. Be sure to follow local electrical codes. 8) Test light for proper operation. 9) Reposition flange cover and secure with flange cover ring - Secure all set screws (1) Power Supply Cable (2) Mounting Plate (3) Leveling Nut (M8 : 4pcs) (4) Washer (M8-Plain Washer / M8-Spring Washer : 4pcs) (5) Nut (M8 : 4pcs) (6) Ceiling Flange (7) Socket Screw for Flange (M6x 8 : 4pcs) (8) Suspension Tube (9) Roll Pin (6 x 70 : 1pce) (10) Socket Screw for Arm (M5 x 8 : 2pcs) (11) Flange Cover (12) Cover Ring (13) Socket Screw for Ring (M5 x 8 : 2pcs)) (14) Light Assembly - 5 -

10 AL 712-M CEILING MOUNTING TEMPLATE 6"-15/32 (REF) 6"-1/16 (REF) 4"-9/32 (REF) 7/16" Mounting Holes - 6 -

11 [6] TRACK LIGHT (AL-715M) 6-1. Dimensions Inches 75-7/ / /2 - Max /2 12-1/8 13-1/ / / Ceiling Preparation For safety in operation as well as stability of the light source, the importance of proper ceiling structure cannot be overemphasized. In general, a ceiling structure capable of supporting 200 lb. dead weight is required. 1) In conventional ceilings with joists perpendicular to center line of light, attach pallet by at least 6-5/16 x 3" lag screws. Suitable holes are provided in pallet for most installations,utilizing 16" or 12" center to center ceiling joists. For other spacings or locations, additional holes can be drilled in pallet. (SEE FIGURE 1.) IMPORTANT:Locate transformer end of track at headrest end of chair only. Electrical Feed Opening Transformer End Used for 24" Center to Center Joists Used for 16" Center to Center Joists 5/16 x 3 Lag Screws (6) Pallet FIGURE

12 2) For conventional ceilings with joists parallel to center line of light, cross blocks must be installed in 3 places to allow mounting with at least 6-5/16 x 3" lag screws. (SEE FIGURE 2.) Crossblocks 3 Places 24" Center to Center FIGURE 2. 3) For suspended ceilings on, appropriate rigid structure must be attached to ceiling framework to provide 200 lb. dead weight capacity. (SEE FIGURE 3.) FIGURE

13 6-3. ELECTRICAL PREPARATION Refer to FIGURE 4 for location of electrical feed opening in pallet, provide 3 wire, 120 V, 60Hz circuit (15 amp. fuse or breaker through flexible conduit with enough slack to protrude at least 2" below pallet when installed. Terminate conduit with 1/2" body box connector suitable for mounting through 3/16 thickness. A readily accessible shut-off switch for this circuit is recommended. Use wiring suitable for 90 C service. 1"-5/8 DIA (Electrical 3/8" DIA HOLE Head of Feed Opening) 1" DIA C'Bore (8Holes) Chair 65"-1/4 6"-5/16 Transformer End 5" 3"-5/8 4"-1/4 24" 8" 16" 11/16" FIGURE INSTALLATION INSTRUCTIONS 1) Lead out the power supply cable from the ceiling where the track light is mounted. 2) Run the power supply cable through the electrical feed opening in the pallet and mount pallet to ceiling. 3) Place track against pallet and slightly engage two mounting bolts(m8 x 25 Hex. Head bolt:6pcs and M8 spring washer:6pcs) at end opposite the electrical opening. 4) Allowing the free end to hang down slightly for access, install the conduit box connector to the track. 5) Finish bolting track securely to pallet. 6) Connect wires from feed to terminal block. 7) Slide trolley onto track (end near electrical opening) with arrow on trolley oriented toward pulley on track. 8) Carefully guide wire from trolley, around spring loaded pulley and back toward transformer end of track. 9) Attach retainer clamp to small screw(m4x8 : 1pce) in track. Clip free end of trolley wire into plastic clip near end. 10) Install rubber bumpers both ends of track in holes provided. 11) This is to be installed by a licensed electrician only, in accordance with the National Electrical Code(in the USA) or Canadian Electrical Code(in Canada), and local electrical codes as applicable. Transformer Box Install Rubber Bumpers after Trolley Plastic Wire Clip Clamp (Factory Installed on Wire) Rubber Bumpers Connector White Green Black Terminal Block Electrical Feed Z Clip To Trolley (Holds Bottom Cover) Pulley Cap - 9 -

14 12) Check operation of trolley. It is factory adjusted to provide smooth effortless travel,without play; however rollers can be readjusted if necessary. Loosen set screw and adjust socket cap screw to vary roller clearance. Trolley Adjustment Screw Set Screw 13) Unpack transformer / housing assembly and mount to track with screws (M4x15 Screw with plain washer & spring washer : 2pcs) provided. 14) Attach pigtail leads to corresponding power line wires at terminal block. Retain wires under plastic clip. Rollers 15) Connect plug-in transformer connector to trolley wire harness. 16) Carefully slide bottom cover onto track from the end on the opposite side of the ransformer end. Be sure to engage lip inside of the bottom covers onto the Z bracket on the track. 17) Install end-cap with screws(screw with plain washer & spring washer M4x15 : 2pcs) provided. 18) Slide trolley back and forth checking for binding or rubbing. 19) Confirm that balance arm is properly adjusted to stay where it is placed. If necessary, move head up or down to expose appropriate cross drilled nut and adjust with tool provided. (See SECTION 7, adjusting tension of balance arm.) 20) Turn on power and check electrical operation of light This is on inside 7 (1) Power supply cable (2) Pallet (3) Track (4) End-cap (5) Trolley (6) Transformer Box (7) Light Assembly (8) Bottom Cover (9) Rubber bumper(4pcs) (10)Screw with plain washer & spring washer M4x15(2 pcs) (11)Hex Head Bolt M8x25(6 pcs) (12)Spring Washer M8 (6 pcs)

15 [7] OPERATING INSTRUCTIONS 7-1. Major Parts Identification (1) Head Assembly (2) Balance Arm Assembly (3) Rigid Arm Assembly (4) Transformer Housing Assembly (5) Power Switch (6) Manual Switch (7) Intensity Switch 1 6 CAUTION CAUTION-Electric shock hazard, do not remove cover. Refer servicing to qualified service personnel 7-2. Power Switch Flip the toggle switch to the side marked with ' I ' to turn on the light. I ; ON O ; OFF Power Switch 7-3. Manual Switch Operation (High or Low) beam ; Flip toggle to left (HIGH or LOW is decided by the intensity switch) Off ; Flip toggle to center Composite Mode beam ; Flip toggle to right Track Type Power Switch 7-4. Intensity Switch High beam ; Flip toggle to left Low beam ; Flip toggle to right Intensity Switch Manual Switch

16 [8] ADJUSTMENTS 8-1. Adjusting Tension of Balance Arm Use slot A when making adjustment for upward / downward drifting of balance arm. Insert adjusting bar into slot A on top of balance arm, turn spring adjustment nut clockwise for more tension ; counterclockwise for less tension Adjusting Angle of Light Head Use slot B when adjusting light head angle. Lift the balance arm to upmost position, and hold it. Loosen screw C. Insert adjusting bar into slot B on top of balance arm, turn spring adjustment nut clockwise for downward angle ; counterclockwise for upward angle. Upward Adjusting Bar lance Less Tension Downward More A C Screw B

17 [9] HALOGEN BULB REPLACEMENT CAUTION Make sure the power supply is turned off. Halogen bulb and surrounding parts be hot immediately after the lamp goes off. Wait until they get cool down. IMPORTANT Do not touch glass with bare hand. Halogen bulb surface must be clean. Oil or body moisture will affect bulb span of life. If glass surface is touched, clean with alcohol. 1) To install replacement halogen bulb, turn light off and remove back cover by loosening stopper screw. 2) Disconnect the electrical connector of halogen bulb. 3) Unlock the spring clip and pull the electrical wire of halogen bulb to remove the halogen bulb from socket. 4) Attach the electrical wire of new halogen bulb and insert halogen bulb into socket. 5) After new halogen bulb is seated in housing, insert and lock spring clip into position. 6) Reattach back cover Stopper Screw 2. Back Cover 3. Electrical wire of halogenbulb 4. Spring Clip 5. Halogen Bulb 6. Socket Replace halogen bulb only with type JA-12V-55WD/DL8 obtainable through your local dealer or contact Belmont Equipment. CAUTION

18 [10] CLEANING,MAINTENANCE PARTS & DISPOSAL Cleaning CAUTION Allow light to cool prior to cleaning. Use a soft cloth or cotton only to gently clean surfaces. Use of other materials can scratch and damage surfaces. Covers can be cleaned with a soft cloth or cotton moistened with alcohol. The reflector can be cleaned with a soft and dry cloth or cotton with extreme care Maintenance Parts Bulb, Lamp cover and fuse are maintenance parts. Period for repair and supplying parts We will supply parts of the equipment for 10 years, after the manufacturing of this equipment is discontinued Lifetime Provided that the recommended and authorized care and maintenance are correctly performed, the working lifetime of this equipment is 10 years from the date of initial shipment from the manufacturer Disposal This is not an infectious device, but prior to disposal make sure that no parts of the device is infected. Follow the federal, state and local regulations for disposal

19 [11] MAINTENANCE AND INSPECTION Guide for daily maintenance and inspection (Maintenance and inspection by user) Management of maintenance and inspection of medical equipment should be implemented by the user (medical inspection). In case the user does not implement such management, it is permitted that such management is outsourced to a qualified entity such as a medical equipment repair company. For safe use of this product, it is necessary that inspection should be conducted in the specified frequency on the items described below

20 NOTE R BELMONT EQUIPMENT, Division of Takara Belmont USA, Inc. 101 Belmont Drive Somerset, New Jersey U.S.A. TEL.:(732) / (800) Fax.:(732) / (800) TAKARA CO, CANADA LTD S. Sheridan Way, Mississauga, Ont., L5J2M4, Can. TEL.:(905) Fax.:(905) TAKARA BELMONT CORPORATION (Manufacturer) 2-1-1,Higashi-shinsaibashi,Chuo-ku,Osaka,Japan TEL.: FAX.: Book No. 1A000YA0 Printed in Japan 0210

LIGHT MODEL IO-5000 AL-511T Unit Mount AL-512T Ceiling Mount AL-515T Track Mount AL-517N / AL-517T Cabinet Mount AL-518T Wall Mount AL-530X Swing Mount INSTALLATION and OPERATION INSTRUCTIONS IMPORTANT

More information

TABLE OF CONTENTS [] SPECIFICATIONS... [] CLASSIFICATION... [] WIRING DIAGRAM -. Unit Mount & Ceiling Mount (AL-90/90) Track Mount Type (AL-90).

TABLE OF CONTENTS [] SPECIFICATIONS... [] CLASSIFICATION... [] WIRING DIAGRAM -. Unit Mount & Ceiling Mount (AL-90/90) Track Mount Type (AL-90). Bel-Halo LED DENTAL LIGHT MODEL AL-90 Unit Mount AL-90 Ceiling Mount AL-90 Track Mount AL-90X Swing Mount INSTALLATION and OPERATION INSTRUCTIONS IMPORTANT After installation is completed, check all the

More information

K301Q-D VRT中英文说明书141009

K301Q-D VRT中英文说明书141009 THE INSTALLING INSTRUCTION FOR CONCEALED TANK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall

More information

Ryobi 10 in. Sliding Compound Miter Saw With Laser Model No. TSS102L Repair Sheet 0 1 2 3 4 62 65 5 6 36 68 6 8 69 6 9 80 81 6 66 40 82 23 3 4 6 44 43 4 45 50 46 52 48 49 51 59 55 54 53 60 5 61 40 58 63

More information

FIGURE A

FIGURE A RYOBI in. TABLE SAW MODEL NUMBER RTS1 REPAIR SHEET 5 5 51 1 5 50 55 5 5 5 5 0 0 0 55 5 5 5 5 0 1 1 1 1 1 5 0 1 5 1 0 5 0 1 1 0 1 1 1 11 1 1 1 15 FIGURE A The model number will be found on a label attached

More information

OA-253_H1~H4_OL.ai

OA-253_H1~H4_OL.ai WARNINGS Note: Read ALL the following BEFORE using this product. Follow all Guidelines at all times while using this product. CAUTION This warning indicates possibility of personal injury and material

More information

WFC40810

WFC40810 9000086873 (PD 85 05 10) Operating and Installation Instructions Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items

More information

LH_Series_Rev2014.pdf

LH_Series_Rev2014.pdf REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check

More information

WVT new

WVT new Operating and Installation Instructions 5120 004601 (PD 84 09 25) Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items

More information

<4D6963726F736F667420576F7264202D2032303130C4EAC0EDB9A4C0E04142BCB6D4C4B6C1C5D0B6CFC0FDCCE2BEABD1A15F325F2E646F63>

<4D6963726F736F667420576F7264202D2032303130C4EAC0EDB9A4C0E04142BCB6D4C4B6C1C5D0B6CFC0FDCCE2BEABD1A15F325F2E646F63> 2010 年 理 工 类 AB 级 阅 读 判 断 例 题 精 选 (2) Computer mouse How does the mouse work? We have to start at the bottom, so think upside down for now. It all starts with mouse ball. As the mouse ball in the bottom

More information

01CP-WX3030WNetc_CO_ENG.indd

01CP-WX3030WNetc_CO_ENG.indd Data Video Projector User s Manual (Concise) ModelS: 8928A/8930A/8931WA/ 8933W Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please

More information

1

1 Application Chuck Instruction Manual Universal Ball Lock Power Chuck APPLICATION CHUCK PBL CHUCK (UNIVERSAL BALL LOCK POWER CHUCK) TABLE OF CONTENTS Keep this manual handy for easy reference as it will

More information

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt

E15-3D1 1. Specifications Compact 4-Way Cassette type Model name MMU- AP0071MH2UL AP0091MH2UL AP0121MH2UL AP0151MH2UL AP0181MH2UL Cooling Capacity kbt E15-3D1 Compact 4-Way Cassette type MMU-AP0071MH2UL MMU-AP0091MH2UL MMU-AP0121MH2UL MMU-AP0151MH2UL MMU-AP0181MH2UL Contents 1. Specifications 2. Dimensions 3. Center of gravity 4. Piping diagram 5. Wiring

More information

Microsoft Word - A doc

Microsoft Word - A doc CONTENTS-FRAME GROUP ATV-150 F1 FRAME F1 FRAME F2 SIDE COVER F3 FUEL TANK F4 FRONT/REAR SHOCK ABSORBER F5 AIR CLEANER F6 SEAT F7 FRONT WHEEL F8 REAR WHEEL - 1 - CONTENTS-FRAME GROUP ATV-150 F9 FRONT BRAKE

More information

Rotary Switch Catalogue

Rotary Switch Catalogue Rotary Switches RS300/400/500 Series Outline Our RS series embody the manufacturing history of our company. All series are sturdy and solid with high dependability designed for control units of plants,

More information

AS4610 Series QSG-EN_SC_TC R02.book

AS4610 Series QSG-EN_SC_TC R02.book Quick Start Guide 4/48-Port GE Data Center Switch AS460-0T AS460-0P AS460-54T AS460-54P. Unpack the Switch and Check Contents AS460-0T AS460-0P Note: The switch can also be installed on a desktop or shelf

More information

CANVIO_AEROCAST_CS_EN.indd

CANVIO_AEROCAST_CS_EN.indd 简 体 中 文...2 English...4 SC5151-A0 简 体 中 文 步 骤 2: 了 解 您 的 CANVIO AeroCast CANVIO AeroCast 无 线 移 动 硬 盘 快 速 入 门 指 南 欢 迎 并 感 谢 您 选 择 TOSHIBA 产 品 有 关 您 的 TOSHIBA 产 品 的 详 情, 请 参 阅 包 含 更 多 信 息 的 用 户 手 册 () 安

More information

pdf

pdf THE INSTLLING INSTRUCTION FOR CONCELED TNK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall

More information

Microsoft Word - 00 表紙1-L版-1.doc

Microsoft Word - 00  表紙1-L版-1.doc IDX-OM-H005-L 初 版 :2003 年 7 月 改 定 :2005 年 7 月 使 用 说 明 书 冷 冻 式 空 气 干 燥 器 IDF1E-10 IDF2E-10 IDF3E-10 IDF3E-20 IDF4E-10 IDF4E-20 IDF6E-10 IDF6E-20 IDF8E-10 IDF8E-20 IDF11E-10 IDF11E-20 本 使 用 手 册 对 本 公 司 生

More information

BC04 Module_antenna__ doc

BC04 Module_antenna__ doc http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 1 of 10 http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 2 of 10 http://www.infobluetooth.com TEL:+86-23-68798999

More information

UTI (Urinary Tract Infection) - Traditional Chinese

UTI (Urinary Tract Infection) - Traditional Chinese UTI (Urinary Tract Infection) Urinary tract infection, also called UTI, is an infection of the bladder or kidneys. Urethra Kidney Ureters Bladder Vagina Kidney Ureters Bladder Urethra Penis Causes UTI

More information

CONGRATULATIONS ON YOUR PURCHASE OF OUR CAMERA This product has been carefully inspected through rigid quality control before shipment. With reasonabl

CONGRATULATIONS ON YOUR PURCHASE OF OUR CAMERA This product has been carefully inspected through rigid quality control before shipment. With reasonabl INSTRUCTIONS MANUAL SMOKE DETECTOR COLOR, B/W CCD CAMERA CONTENTS English / Chinese PREFACE SAFETY INSTRUCTIONS FUNCTION DESCRIPTION INSTALLATION SPECIFICATIONS PR0210SDE2 Thank you very much for purchasing

More information

Microsoft Word - 301E高温样本封面.doc

Microsoft Word - 301E高温样本封面.doc 无锡卓尔阀业有限公司 301E 三偏心高温 蝶阀 Triple Eccentric High Temperature Butterfly Valves STANDARD SPECIFICATION 301E GENERAL 301E Triple Eccentric High Temperature Butterfly valve 301E Triple eccentric high temperature

More information

: 205-03-311 5863 Series 0.35mm Pitch Board-to-Board Connector TABLE OF CONTENTS OUTLINE PART NAMES AND MODEL NUMBERS PART NAMES MODEL NUMBERS PRECAUTIONS IN HANDLING USING FOR BOARD-TO-BOARD CONNECTION

More information

Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E

Gerolor Motors Series Dimensions A,B C T L L G1/2 M8 G1/ A 4 C H4 E Gerolor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 12 12 1 1 0 0 2 2 31 31 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 2mm Keyed (A) 1.0'

More information

IMPORTANT SAFETY INSTRUCTIONS / When using an electrical appliance, basic safety precautions should always be followed, including the following:read a

IMPORTANT SAFETY INSTRUCTIONS / When using an electrical appliance, basic safety precautions should always be followed, including the following:read a 1-NEEDLE, 3-THREAD OVERLOCK SEWING MACHINE MO-623 INSTRUCTION MANUAL IMPORTANT: READ ALL SAFETY REGULATIONS CAREFULLY AND UNDERSTAND THEM BEFORE USING YOUR SEWING MACHINE. RETAIN THIS INSTRUCTION MANUAL

More information

HCD0174_2008

HCD0174_2008 Reliability Laboratory Page: 1 of 5 Date: December 23, 2008 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified

More information

TECHNICAL DATA Date 12/22/15 Series F21U F MOTOR SPECIFICATIONS Motor Design Applications Insulation Class Maximum Liquid Temp Frequency RPM Air Filled Effulent water Class B 0-40 C ( 32-104 F ) 60 HZ

More information

Male Circumcision - Traditional Chinese

Male Circumcision - Traditional Chinese Male Circumcision Male circumcision is the removal of the foreskin around the end of the penis. If you decide on circumcision, your baby s doctor will do it in the hospital s nursery. If your baby is small

More information

Male Circumcision - Simplified Chinese

Male Circumcision - Simplified Chinese Male Circumcision Male circumcision is the removal of the foreskin around the end of the penis. If you decide on circumcision, your baby s doctor will do it in the hospital s nursery. If your baby is small

More information

Gerotor Motors Series Dimensions A,B C T L L G1/2 M G1/ A 4 C H4 E

Gerotor Motors Series Dimensions A,B C T L L G1/2 M G1/ A 4 C H4 E Gerotor Motors Series Size CC-A Flange Options-B Shaft Options-C Ports Features 0 0 5 5 1 0 1 0 3 3 0 0 SAE A 2 Bolt - (2) 4 Bolt Magneto (4) 4 Bolt Square (H4) 1.0" Keyed (C) 25mm Keyed (A) 1.0' 6T Spline

More information

Ratings Specifications Outstanding Environmental Performance The body resin used by the BOXTC series is a reinforced PBT, which is PBT resin with high

Ratings Specifications Outstanding Environmental Performance The body resin used by the BOXTC series is a reinforced PBT, which is PBT resin with high Box Terminal TOGI s Box Terminals are the choicest terminal boxes for cable connection of industrial equipment, such as machine tool control, switching, power distribution and instrumentation equipment.

More information

Pneumonia - Traditional Chinese

Pneumonia - Traditional Chinese Pneumonia When you have pneumonia, the air sacs in the lungs fill with infection or mucus. Pneumonia is caused by a bacteria, virus or chemical. It is not often passed from one person to another. Signs

More information

二. 气门 VALVE F Intake Valve F Exhaust Valve F Valve Spring Seat F Inner Spring Of Val

二. 气门 VALVE F Intake Valve F Exhaust Valve F Valve Spring Seat F Inner Spring Of Val 一. 气缸头 CYLINDER HEAD 1 12200-F18-0000 Cylinder Head Assy 1 2 70.1-8-20 Screw M8 20 2 3 36550-F68-0000 Water Temperature Sensor Delphi15404280 1 4 16674-6-14 Hex Flange Bolt M6 14 1 5 90601-F11-0000 Gasket

More information

接线端子--Connectors规格书.doc

接线端子--Connectors规格书.doc Connectors with/without wire protector high-temperature resistant* High grade flexible strips Resistant to temperature up to 100 C (to 140 C) Multiple approvals Raised base Available with or without wire

More information

1.ai

1.ai HDMI camera ARTRAY CO,. LTD Introduction Thank you for purchasing the ARTCAM HDMI camera series. This manual shows the direction how to use the viewer software. Please refer other instructions or contact

More information

Nebulizer Treatments - Simplified Chinese

Nebulizer Treatments - Simplified Chinese Nebulizer Treatments Some medicines need to be given through a nebulizer treatment. Nebulizer treatments are also called breathing treatments, aerosol treatments or med nebs. A nebulizer changes liquid

More information

SHIMPO_表1-表4

SHIMPO_表1-表4 For servo motor ABLEREDUCER SSeries Coaxial shaft series Features S series Standard backlash is 3 arc-min, ideal for precision control. High rigidity & high torque were achived by uncaged needle roller

More information

LTTH-product-bro

LTTH-product-bro 海 南 海 航 汉 莎 技 术 培 训 有 限 公 司 培 训 课 程 介 绍 飞 机 维 修 培 训 课 程 海 航 汉 莎 培 训 产 品 产 品 选 择 培 训 目 标 海 南 海 航 汉 莎 技 术 培 训 有 限 公 司 是 于 2007 年 由 德 国 汉 莎 技 术 培 训 和 海 航 集 团 共 同 出 资 建 立 的 一 家 专 门 从 事 民 用 航 空 维 修 培 训 的 中

More information

Pro-Meter S-Series Dispensers

Pro-Meter S-Series Dispensers Pro Meter S 7608-08 - Chinese - /, :http://emanuals.nordson.com/finishing NORDSON CORPORATION AMHERST, OHIO USA ............................................. /......... 0 Pro Meter S... 0... 0... 0..................

More information

untitled

untitled F3 F3 -- DA4G8 (ENGINE TYPE NUMBER) 4D 54A0004 54A0004 (PRODUCE GLIDE NUMBER) 5 2005 (2005 YEAR) 4 4 (APRIL) A0004 (PRODUCE ORDER NUMBER) The type number and the series number are marked on the left side

More information

SHIMPO_表1-表4

SHIMPO_表1-表4 For servo motor ABLEREDUCER L Series Features Coaxial shaft series L series Helical gears contribute to reduce vibration and noise. Standard backlash is 5 arc-min, ideal for precision control. High rigidity

More information

Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies to all d

Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies to all d WeChat Search Visual Identity Guidelines WEDESIGN 2018. 04 Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies

More information

Microsoft Word - PA-110E-REV.4-MGA繝・・繧ソ繧キ繝シ繝・P0-P3_-繝壹・繧ク菴咲スョ隱ソ謨エ.doc

Microsoft Word - PA-110E-REV.4-MGA繝・・繧ソ繧キ繝シ繝・P0-P3_-繝壹・繧ク菴咲スョ隱ソ謨エ.doc Pascal mag clamp Magnetic mold clamp model MGA DATA SHEET www.pascaleng.co.jp Specifications are subject to change without prior notice. Pamphlet PA-110E REV.6 2007.09 Calculation of Fixing Force Calculation

More information

UL817 UL .. 7.1.13.. 15 17 19 21 24 26 28.30 Conductor Secureness Test UL817 (81.1 81.2) blade pin female contact Normal 13 Tightened 20 Reduced 5 18AWG 20 89 18AWG 8 36 1 dead weights tensile testing

More information

HC50246_2009

HC50246_2009 Page: 1 of 7 Date: June 2, 2009 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

TB015 Book No.PC3-101Z6 S N

TB015  Book No.PC3-101Z6 S N INDEX Item Part number Description Q'ty Chan. Serial No. Remarks 1 UNDERCARRIAGE 2 TURNTABLE & CONTROL LEVER 3 ENGINE & ELECTRICAL SYSTEM 4 HYDRAULIC PIPNG & TANK 5 COVER & CAB 6 HOE ATTACHMENT 7 DECAL

More information

Microsoft Word - GTR50 64A Engine.doc

Microsoft Word - GTR50 64A Engine.doc CONTENTS-ENGINE GROUP E1 GENERATOR & CRANKSHAFT E2 PISTON & DRIVE FACE STARTER CLUTCH OUTER ASSY E3 GTR-50 CYLINDER E4 CRANKCASE & OIL PUMP & CLUTCH & TRANSMISSION E5 R. CRANK CASE COVER E6 CARBURETOR

More information

Microsoft Word MasterCraft X-30_Maint.doc

Microsoft Word MasterCraft X-30_Maint.doc 2006 MasterCraft X30 Maintenance and Service Log MCX 350 Engine V Drive transmission Three ballast tanks Heater October 20, 2009 Table of Contents 2006 MasterCraft X30 1 1. Winterization 3 1.1 Engine (MCX

More information

OVLFx3C7_Series_A3_bgry-KB.pub

OVLFx3C7_Series_A3_bgry-KB.pub (5 mm) x High brightness with well-defined spatial radiation patterns x U-resistant epoxy lens x Blue, green, red, yellow Product Photo Here Each device in the OLFx3C7 series is a high-intensity LED mounted

More information

CYLINDER HEAD ASSY Cylinder Head Comp Flange Bolt M Aluminum Washer

CYLINDER HEAD ASSY Cylinder Head Comp Flange Bolt M Aluminum Washer HS400UTV/HS400UTV-2 ENGINE PARTS-2013 VERSION CYLINDER HEAD ASSY. 1 1220A-002C-0000 Completed Cylinder Head Comp.( For EFI) 1 第 1 页, 共 22 页 CYLINDER HEAD ASSY. 1 12200-002-0000 Cylinder Head Comp 1 2 93107-0601-4060

More information

HC70245_2008

HC70245_2008 Reliability Laboratory Page: 1 of 6 Date: September 5, 2008 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified

More information

010 X Watch out for traffic signals 011 X Bumpy road 012 O Tunnel ahead 013 X Bicycles prohibited 014 O Yield 015 O Single lane road, pass with extrem

010 X Watch out for traffic signals 011 X Bumpy road 012 O Tunnel ahead 013 X Bicycles prohibited 014 O Yield 015 O Single lane road, pass with extrem 001 X Winding road, left turn ahead 002 O Forked road 003 X Bump ahead 004 O Steep downgrade ahead 005 O Narrow bridge 006 X Narrow Road 007 X Narrow road 008 O No-gate railroad crossing 009 O Watch out

More information

CHINESE $WaP Vincent booklet

CHINESE $WaP Vincent booklet ELECTRICITY, GAS and WATER How to save money and help the environment 电, 天 然 气 和 水 如 何 省 钱 和 帮 助 改 善 环 境 CONTENTS Reach for the Stars Saving Energy Hot Water Heating & Cooling Refrigeration Lighting Cooking

More information

4802使用手册0409.doc

4802使用手册0409.doc UV-4802 1 11 12 13 1 1 1 2 21 2 22 2 23 3 24 4 4 31 4 32 5 33 7 331 7 332 8 333 9 34 11 11 41 11 411 12 412 12 413 12 42 13 14 51 14 511 14 512 14 513 15 514 15 515 16 516 18 20 61 20 62 20 63 21 64 22

More information

Logitech Wireless Combo MK45 English

Logitech Wireless Combo MK45 English Logitech Wireless Combo MK45 Setup Guide Logitech Wireless Combo MK45 English................................................................................... 7..........................................

More information

双 针 二 / 三 / 四 / 五 线 包 缝 机 操 作 指 南 要 领 : 在 您 使 用 缝 纫 机 之 前, 请 仔 细 阅 读 并 理 解 所 有 的 安 全 操 作 规 程 重 要 的 安 全 操 作 规 则 重 点 安 全 说 明 : 由 于 本 机 器 有 电 器 装 置, 所 以 在 使 用 前 必 须 时 刻 注 意 最 基 本 的 安 全 规 则, 阅 读 所 有 操 作 说

More information

ACI F Cylinder ACI F Cylinder ACI F Cylinder ACI F Cylind

ACI F Cylinder ACI F Cylinder ACI F Cylinder ACI F Cylind 单位名称 / MRO 许可证号 / CAAC Certificate No. 部件号 / Part No. 部件描述 / Description 依据文件 / Technical Data ACI F00100553 3169904-1 Body 21-50-83 ACI F00100553 3169904-5 Body 21-50-83 ACI F00100553 727475-6 Body 21-51-40

More information

Parts List and Sewing Equipment Please enter your Chinese text here! Keystone Sewing Machine Company, Inc. 267 Table of contents Table / Chinese Chine

Parts List and Sewing Equipment Please enter your Chinese text here! Keystone Sewing Machine Company, Inc. 267 Table of contents Table / Chinese Chine Parts List and Sewing Equipment Please enter your Chinese text here! 267 Manufacturer: Contact: Manufacturer: Contact: Dürkopp Adler Manufacturing (Shanghai) Co., Ltd. 1201 Luoshan Road, Pudong New Area,

More information

AS T Quick Start Guide

AS T Quick Start Guide Quick Start Guide 54-Port 0G / 40G Copper Ethernet Switch AS58-54T. Unpack the Switch and Check Contents Use the screws and cage nuts supplied with the rack to secure the switch in the rack. AS58-54T Rack

More information

HC80279_2007

HC80279_2007 Reliability Laboratory Page: 1 of 7 Date: August 31, 2007 TEMWELL CORPORATION 8F-1, NO. 51, SEC. 1, MIN SHENG E. RD., TAIPEI, TAIWAN The following merchandise was submitted and identified by the vendor

More information

Microsoft Word - HC20138_2010.doc

Microsoft Word - HC20138_2010.doc Page: 1 of 7 Date: April 26, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

MS24264 连接器

MS24264 连接器 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R Inactive for new design for 14 November 1977.For new design, use MIL-DTL-83723, series III,

More information

HC20131_2010

HC20131_2010 Page: 1 of 8 Date: April 14, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

入學考試網上報名指南

入學考試網上報名指南 入 學 考 試 網 上 報 名 指 南 On-line Application Guide for Admission Examination 16/01/2015 University of Macau Table of Contents Table of Contents... 1 A. 新 申 請 網 上 登 記 帳 戶 /Register for New Account... 2 B. 填

More information

HS244500W HS244600W.ppt

HS244500W HS244600W.ppt 西 门 子 嵌 入 式 食 具 消 毒 柜 BUILT-IN TABLEWARE STERILIZER 使 用 及 安 装 说 明 书 OPERATION AND INSTALLATION INSTRUCTION cn HS244500W HS244600W 前 言 /Preface 非 常 感 谢 您 选 购 西 门 子 家 电 的 厨 房 电 器 产 品! 在 使 用 本 产 品 前, 请 您

More information

8260

8260 8260 2004 9 Lenovo 15 32 1 60 40 60 2 ... 6... 6... 7... 9... 11... 14... 15... 15... 16... 17 PictBridge... 18... 19... 19 Lenovo... 21 Lenovo... 23... 24... 25 Lenovo... 28... 29 3 ... 30... 30... 31...

More information

Rhino SD/XD 125- or 160-mm Frames

Rhino SD/XD 125- or 160-mm Frames Rhino SD/XD 5 60 mm - Chinese - 08 8, http://emanuals.nordson.com NORDSON CORPORATION AMHERST, OHIO USA ..................... 3............ 5... 5... 8... 8... 8... 0... 0... 0... 3... 3 30 55 5 mm...

More information

Important Notice SUNPLUS TECHNOLOGY CO. reserves the right to change this documentation without prior notice. Information provided by SUNPLUS TECHNOLO

Important Notice SUNPLUS TECHNOLOGY CO. reserves the right to change this documentation without prior notice. Information provided by SUNPLUS TECHNOLO Car DVD New GUI IR Flow User Manual V0.1 Jan 25, 2008 19, Innovation First Road Science Park Hsin-Chu Taiwan 300 R.O.C. Tel: 886-3-578-6005 Fax: 886-3-578-4418 Web: www.sunplus.com Important Notice SUNPLUS

More information

Table of Contents Power Film Capacitors Power Film Capacitors Series Table Product Type Series Voltage Capacitance() Page DC-Link Power Film Capacitors Power Film Capacitors Power Film Capacitors Power

More information

E1

E1 20041016 34 CPI MOTORCYCLE 35 CPI MOTORCYCLE F1 FRAME BODY MINI 50 36 CPI MOTORCYCLE F1 FRAME BODY ITEM PARTS NO. DESCRIPTION REQD. NO. MINI 50 1 A04-41110-10-00 FRAME COMP. 1 2 S-6123-06002-20 BEARING

More information

CONTENTS D0-Page Cylinder Head D0-Page Cylinder D0-Page Camshaft D0-Page Cam Chain Tensioner D0-Page Crankcase D0-Page Oil Filter D0-Page Oil Pump D0-

CONTENTS D0-Page Cylinder Head D0-Page Cylinder D0-Page Camshaft D0-Page Cam Chain Tensioner D0-Page Crankcase D0-Page Oil Filter D0-Page Oil Pump D0- TDX-F THUMPSTAR ENGINE PARTS CONTENTS D0-Page Cylinder Head D0-Page Cylinder D0-Page Camshaft D0-Page Cam Chain Tensioner D0-Page Crankcase D0-Page Oil Filter D0-Page Oil Pump D0-Page Crankshaft/Piston

More information

Microsoft Word - 3. Vitroefication_using_EMGP.docx

Microsoft Word - 3. Vitroefication_using_EMGP.docx EM GP 冷 冻 样 品 制 备 实 习 教 程 (Xiaojun Huang, Gang Ji) 每 位 演 示 及 带 领 学 员 实 习 EM GP 冷 冻 样 品 制 备 的 老 师 的 材 料 清 单 : 1)15 个 GIG 载 网 2) 冷 冻 样 品 Ferritin 或 Ribosome 3)EM GP 专 用 镊 子 1 把 4)1-10ul 移 液 器,1 把 ( 移 液 器

More information

1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源

1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源 1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源 B. 啟 用 智 慧 型 裝 置 的 無 線 Wi-Fi C. 選 擇 無 線 網 路 名 稱 "edimax.setup"

More information

. Land Patterns for Reflow Soldering.Recommended Reflow Soldering Conditions (For Lead Free) TYPE PID0703 PID0704 PID1204 PID1205 PID1207 PID1209 L(mm

. Land Patterns for Reflow Soldering.Recommended Reflow Soldering Conditions (For Lead Free) TYPE PID0703 PID0704 PID1204 PID1205 PID1207 PID1209 L(mm .Features: 1.Magnetic Shielded surface mount inductor with high current rating. 2.Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in

More information

安 省 驾 照 中 文 考 题 007 版 页 码,/ C) 不 平 路 在 前 面 0 米 (00 英 尺 ) D) 火 车 路 在 前 A A) 目 的 地 指 示 牌 B) 学 校 区 域 小 心 儿 童 玩 耍 C) 省 公 园 D) 行 人 路 牌 A A) 学 校 巴 士 过 十 子 路

安 省 驾 照 中 文 考 题 007 版 页 码,/ C) 不 平 路 在 前 面 0 米 (00 英 尺 ) D) 火 车 路 在 前 A A) 目 的 地 指 示 牌 B) 学 校 区 域 小 心 儿 童 玩 耍 C) 省 公 园 D) 行 人 路 牌 A A) 学 校 巴 士 过 十 子 路 安 省 驾 照 中 文 考 题 007 版 页 码,/ 007--0 加 拿 大 安 大 略 省 驾 照 考 试 中 文 试 题 大 全 ONTARIO DRIVER'S LICENCE (G 笔 试 试 题 ) G 新 牌 考 取 年 内 买 汽 车 保 险 比 G 牌 便 宜, 购 买 最 优 惠 的 汽 车 保 险 问 题 请 咨 询 ( 安 省 ):6-858-0079 Robert,Email:

More information

AS X, AS X, AS X Quick Start Guide

AS X, AS X, AS X Quick Start Guide Quick Start Guide 54-Port 0G/40G Fiber Ethernet Switch AS570-54X AS57-54X AS58-54X. Unpack the Switch and Check Contents Use the screws and cage nuts supplied with the rack to secure the switch in the

More information

300cc Engine.xls

300cc Engine.xls 0 0 cc Engine Update://00 E- CRANKCASE E- CYLINDER HEAD COVER, CYLINDER HEAD (Sport and Utility model for EEC Version) E- PISTON, CRANKSHAFT, CYLINDER E- R.CRANKCASE, WATER PUMP E- CVT E- GENERATOR, STARTER

More information

Pro-Meter Gear Metering Pump

Pro-Meter Gear Metering Pump Pro Meter P/N 7580058E 0 - Chinese - 06 4 NORDSON CORPORATION AMHERST, OHIO USA ....................................... 4... 4... 4... 4... 4... 4... 6... 6... 6 O... 7... 7... 7... 8... 8... 8... 0...

More information

8016_2_1page

8016_2_1page VARICONTM PART NUMBERING SYSTEM 00 NO. NUMBER OF CONTACTS 20=020, 38=038, 56=056, 90=090, 120=120 CONTACT CODE INSULATOR V=Standard Type HV=For High Voltage ( ) ( NO. OF CONTACTS) 20,38,56,90,120 (PITCH

More information

98 PartsList FRAME 2/14 2/ Sine Fastener T Front Cover Brake Stopper CMP Front Bump

98 PartsList FRAME 2/14 2/ Sine Fastener T Front Cover Brake Stopper CMP Front Bump 98 PartsList FRAME 1/14 1/53 14 80-1488-902-00 Label, ETESIA (12048) 1 Supplied by ETESIA 13 0259-80300 Label, Cutting Height Adjusting (13255) 1 12 0259-80200 Label, ATTILA98 (13254) 2 11 0259-80100 Plate

More information

Captive Screws Styled knob series M3 thread size Smooth knob meets UL-1950 Designed for hand operation Spring ejected Wide variety of sizes, re

Captive Screws Styled knob series M3 thread size Smooth knob meets UL-1950 Designed for hand operation Spring ejected Wide variety of sizes, re 440 47 Captive Screws d knob series M3 thread size Smooth knob meets U-1950 Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options Material and Finish : Press-in:

More information

Microsoft Word - PS 15-BPT-004-EN.doc

Microsoft Word - PS 15-BPT-004-EN.doc ECL0-BPT-00 SPAREPARTS LIST Electric Stacker PS 5 Version 0/204 From truck identification number: 30307000 PS 5-BPT-004-EN Catalogue Fig. Label (for EU)...3 Fig. 2 Label (for US)...4 Fig. 3 Outline (Three-stage

More information

* 1 * *1 *2 2

* 1 * *1 *2 2 * 1 * 2 1 2 *1 *2 2 3 1 2 7 bo 8 9 6 5 4 3 bn bm bl bk 1 2 3 * 4 5 6 7 8 9 bk bl p bq bp bm * bn bo bp bq * br br 8 . bs br bq bp bo 1234567 bo bnbm bl 8 9 bk 1 2 3 4 5 6 7 8 9 bk b bl bm bn bo bp

More information

CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm mm Spindle bore 181mm is standard. 255,5 or 5mm is option. Chuck is optional. You ca

CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm mm Spindle bore 181mm is standard. 255,5 or 5mm is option. Chuck is optional. You ca CNC KINWA FLAT BED CNC LATHE CL-68x00 CL-68/CL-78 Series Swing 11, mm Between centers 00~7000mm Spindle bore 181, 255, 5, 5mm Spindle motor 60HP CL-68x00,00,00,00,00, CL-78x00,00,00,00,6000 Spindle 181mm

More information

ch_code_infoaccess

ch_code_infoaccess 地 產 代 理 監 管 局 公 開 資 料 守 則 2014 年 5 月 目 錄 引 言 第 1 部 段 數 適 用 範 圍 1.1-1.2 監 管 局 部 門 1.1 紀 律 研 訊 1.2 提 供 資 料 1.3-1.6 按 慣 例 公 布 或 供 查 閱 的 資 料 1.3-1.4 應 要 求 提 供 的 資 料 1.5 法 定 義 務 及 限 制 1.6 程 序 1.7-1.19 公 開 資

More information

PARTS LIST OF Venus.xls

PARTS LIST OF Venus.xls 6 BODY PARTS LIST OF Venus CONTROL ASSY. 40460B50T00 40460B3000 MIRROR ASSY, REAR VIEW, LH 2 65500B50T000 65500B30000 COWLING ASSY 3 6550B50T000 6550B30000 SKELETON ASSY, SUPPORT 4 6550B50T000 6550B30000

More information

MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE

MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE MODEL COLOR LIST UZ125D2K K13 BLACK YRG BLUE YPK WHITE MODEL COLOR LIST UZ125X2 G22 Q05 GRAY ORANGE GREEN WHITE N28 W08 PREFACE When it becomes

More information

Bottle Feeding Your Baby - Simplified Chinese

Bottle Feeding Your Baby - Simplified Chinese Bottle Feeding Your Baby Bottle feeding with formula will meet your baby s food needs. Your doctor will help decide which formula is right for your baby. Never give milk from cows or goats to a baby during

More information

Microsoft Word - 100999_HowUseInsulinPen_ChiTr-DTP-UPDATED-ED-HD.doc

Microsoft Word - 100999_HowUseInsulinPen_ChiTr-DTP-UPDATED-ED-HD.doc How to Use an Insulin Pen Select the Site for Injection Sites which can be used are: Back of upper arms Abdomen (around navel) Front and side area of thighs Back above waist Buttocks Stay 1 inch away from

More information

K7VT2_QIG_v3

K7VT2_QIG_v3 ............ 1 2 3 4 5 [R] : Enter Raid setup utility 6 Press[A]keytocreateRAID RAID Type: JBOD RAID 0 RAID 1: 2 7 RAID 0 Auto Create Manual Create: 2 RAID 0 Block Size: 16K 32K

More information

untitled

untitled XT50GY PARTS CATALOGUE Kinroad xintian Motorcycle Manufacture co., ltd Content 1. HEADLIGHT01 15. SWING ARM21 2. SPEEDOMETER 02 16.BRAKE ARM23 3.TAIL LIGHT 03 17. FUEL TANK 25 4.TURNSIGNAL LIGHT04 18.

More information

Microsoft Word - template.doc

Microsoft Word - template.doc HGC efax Service User Guide I. Getting Started Page 1 II. Fax Forward Page 2 4 III. Web Viewing Page 5 7 IV. General Management Page 8 12 V. Help Desk Page 13 VI. Logout Page 13 Page 0 I. Getting Started

More information

TECHNICAL DATA Date 6/12/212 Series 5ASH21.5 AS MOTOR SPECIFICATIONS Motor Design Applications Insulation Class Maximum Liquid Temp Frequency RPM Air Filled Waste Water Class B -4 C ( 32-14 F ) HZ 345

More information

iml88-0v C / 8W T Tube EVM - pplication Notes. IC Description The iml88 is a Three Terminal Current Controller (TTCC) for regulating the current flowi

iml88-0v C / 8W T Tube EVM - pplication Notes. IC Description The iml88 is a Three Terminal Current Controller (TTCC) for regulating the current flowi iml88-0v C / 8W T Tube EVM - pplication Notes iml88 0V C 8W T Tube EVM pplication Notes Table of Content. IC Description.... Features.... Package and Pin Diagrams.... pplication Circuit.... PCB Layout

More information

99 學年度班群總介紹 第 370 期 班群總導 陳怡靜 G45 班群總導 陳怡靜(河馬) A 家 惠如 家浩 T 格 宜蓁 小 霖 怡 家 M 璇 均 蓁 雴 家 數學領域 珈玲 國燈 370-2 英領域 Kent

99 學年度班群總介紹 第 370 期 班群總導 陳怡靜 G45 班群總導 陳怡靜(河馬) A 家 惠如 家浩 T 格 宜蓁 小 霖 怡 家 M 璇 均 蓁 雴 家 數學領域 珈玲 國燈 370-2 英領域 Kent 2010 年 8 月 27 日 出 刊 精 緻 教 育 宜 蘭 縣 公 辦 民 營 人 國 民 中 小 學 財 團 法 人 人 適 性 教 育 基 金 會 承 辦 地 址 : 宜 蘭 縣 26141 頭 城 鎮 雅 路 150 號 (03)977-3396 http://www.jwps.ilc.edu.tw 健 康 VS. 學 習 各 位 合 夥 人 其 實 都 知 道, 我 是 個 胖 子, 而

More information

RH9820_JE0619.indd

RH9820_JE0619.indd RH-9820 PARTS BOOK ELECTRONIC EYELET BUTTON HOLER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/eng/

More information

Yuandong-hawks Ball valve cdr

Yuandong-hawks Ball valve cdr Yuandong 奉化市远东车辆部件有限公司 Fenghua Yuandong Auto Parts imited Company 奉化市哈克斯自动化设备有限公司 Fenghua awks Automatic Equipment imited Company igh Pressure Ball Valve igh pressure Ball valve is mainly used in the hydraulic

More information

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DV-SP302 Ct WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE

More information