CDXX-R3300-R3300S

Transcription

1 (1) FM/AM Compact Disc Player AUTOESTEREO PARA DISCO COMPACTO Operating Instructions Manual de instrucciones GB ES CT For installation and connections, see the supplied installation/connections manual. Para obtener información sobre la instalación y las conexiones, consulte el manual de instalación/conexiones suministrado. CDX-R3300 CDX-R3300S 2004 Sony Corporation

2 Welcome! Thank you for purchasing this Sony Compact Disc Player. You can enjoy its various features even more with: MP3 file playback. CD-R/CD-RW which can have a session added can be played (page 7). Discs recorded in Multi Session can be played, depending on the recording method (page 7). CD TEXT information (displayed when a CD TEXT disc* 1 is played). ID3 tag* 2 version 1.0, 1.1, 2.2, 2.3 or 2.4 information (displayed when an MP3 file is played). Optional controller accessories Card remote commander RM-X114 Rotary commander RM-X4S *1 A CD TEXT disc is an audio CD that includes information such as the disc name, artist name, and track names. This information is recorded on the disc. *2 ID3 tag is an MP3 file that contains information about album name, artist name, track name, etc. This label is located on the bottom of the chassis. 2

3 Table of Contents Location of controls Precautions Notes on discs About MP3 files Getting Started Resetting the unit Detaching the front panel Setting the clock CD Player Playing a disc Display items Playing tracks repeatedly Repeat Play Playing tracks in random order Shuffle Play Radio Storing stations automatically Best Tuning Memory (BTM) Receiving the stored stations Storing only the desired stations Other Functions Using the rotary commander Adjusting the sound characteristics Quickly attenuating the sound Changing the sound and display settings Menu Setting the equalizer (EQ3) Additional Information Maintenance Removing the unit Specifications Troubleshooting Error displays/messages

4 Location of controls Refer to the pages listed for details. ATT OFF DSPL EQ3 SEEK ALBUM + REP SHUF SOURCE MODE SEL SENS SCRL BTM CDX-R3300 CDX-R3300S a Volume +/ button b ATT (attenuate) button 16 c DSPL (display mode change) button 10, 12 d OPEN/EJECT shutter 11 e Display window f EQ3 button 17, 18 g OFF (Stop/Power off) button* 9, 11 h SEEK +/ button Radio: To tune in stations automatically/find a station manually. CD (MP3 files): To skip tracks/fast-forward, reverse a track. i (front panel release) button 9 j SOURCE (Power on/radio/cd) button To select the source. k MODE button To change the operation. l SEL (select) button To select items. m RESET button (located on the front side of the unit, behind the front panel) 9 n Number buttons 17 Radio: To store the desired station on each number button. MP3 files: (1): ALBUM 11 (2): ALBUM + 11 CD: (3): REP 12 (4): SHUF 12 o Frequency select switch (located on the bottom of the unit) See Frequency select switch in the Installation/Connections manual. p SENS button 13 q SCRL (scroll) button 12 r BTM button 13 s Receptor for the card remote commander * Warning when installing in a car without an ACC (accessory) position on the ignition switch After turning off the ignition, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. 4

5 Card remote commander RM-X114 (optional) Selecting an album with the card remote commander Album can be skipped using the DISC (ALBUM) (+/ ) buttons on the card remote commander. DSPL MENU PRESET + DISC + MODE LIST To Press Skip albums* 2 + or [once for each album] Album selection To continuously skip albums, press and hold either button. SEEK SOUND OFF SOURCE DISC PRESET + VOL SEEK+ ENTER ATT *2 Available only when an MP3 file is played. Skipping tracks continuously Press once (SEEK) (+) or (SEEK) ( ) on the card remote commander, then press again within 2 seconds and hold. The corresponding buttons of the card remote commander control the same functions as those on this unit. a DSPL button b MENU button* 1 c SOURCE button d SEEK ( /+) buttons e SOUND button f OFF button g VOL (+/ ) buttons h MODE button i LIST button* 1 j DISC* 1 (ALBUM)/PRESET (+/ ) buttons k ENTER button* 1 l ATT button *1 Not available for this unit Note If the display disappears by pressing (OFF), it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. Tip For details on how to replace the battery, see Replacing the lithium battery on page 19. 5

6 Precautions If your car has been parked in direct sunlight, allow the unit to cool off before operating it. Power aerial will extend automatically while the unit is operating. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. Moisture condensation On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. To maintain high sound quality Be careful not to splash juice or other soft drinks onto the unit or discs. Notes on discs To keep a disc clean, do not touch its surface. Handle the disc by its edge. Keep your discs in their cases or disc magazines when not in use. Do not subject discs to heat/high temperature. Avoid leaving them in a parked car or on a dashboard/rear tray. Do not attach labels, or use discs with sticky ink/residue. Such discs may stop spinning when used, causing a malfunction, or may ruin the disc. Do not use any discs with labels or stickers attached. The following malfunctions may result from using such discs: Inability to eject a disc (due to a label or sticker peeling off and jamming the eject mechanism). Inability to read audio data correctly (e.g., playback skipping, or no playback) due to heat shrinking of a sticker or label causing a disc to warp. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. You cannot play 8 cm CDs. 6

7 Before playing, clean the discs with a commercially available cleaning cloth. Wipe each disc from the centre out. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analogue discs. Music discs encoded with copyright protection This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Notes on CD-Rs (recordable CDs)/CD- RWs (rewritable CDs) This unit can play the following discs: Type of discs Label on the disc Audio CD MP3 files Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. You cannot play a CD-R/CD-RW that is not finalized*. You can play MP3 files recorded on CD- ROMs, CD-Rs, and CD-RWs. A CD-R/CD-RW to which a session can be added can be played. About MP3 files MP3 (MPEG 1 Audio Layer-3) is a standard technology and format for compressing a sound sequence. The file is compressed to about 1/10 of its original size. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed. Notes on discs You can play MP3 files recorded on CD-ROMs, CD-Rs, and CD-RWs. The disc must be in the ISO 9660* 1 level 1 or level 2 format, or Joliet or Romeo in the expansion format. You can use a disc recorded in Multi Session* 2. * 1 ISO 9660 Format The most common international standard for the logical format of files and folders on a CD-ROM. There are several specification levels. In Level 1, file names must be in the 8.3 format (no more than 8 characters in the name, no more than 3 characters in the extension.mp3 ) and in capital letters. Folder names can be no longer than 8 characters. There can be no more than 8 nested folder levels. Level 2 specifications allow file names up to 31 characters long. Each folder can have up to 8 trees. For Joliet or Romeo in the expansion format, make sure of the contents of the writing software, etc. * 2 Multi Session This is a recording method that enables adding of data using the Track-At-Once method. Conventional CDs begin at a CD control area called the Lead-in and end at an area called Lead-out. A Multi Session CD is a CD having multiple sessions, with each segment from Lead-in to Lead-out regarded as a single session. CD-Extra: The format which records audio (audio CD data) as tracks on session 1, and records data as tracks on session 2. Mixed CD: In this format, data is recorded as track 1, and audio (audio CD data) is recorded as track 2. continue to next page t * A process necessary for a recorded CD-R/CD-RW disc to be played on the audio CD player. 7

8 Notes With formats other than ISO 9660 level 1 and level 2, folder names or file names may not be displayed correctly. When naming, be sure to add the file extension.mp3 to the file name. If you put the extension.mp3 to a file other than MP3, the unit cannot recognize the file properly and will generate random noise that could damage your speakers. The following discs take a longer time to start playback. a disc recorded with complicated tree structure. a disc recorded in Multi Session. a disc to which data can be added. Cautions when playing a disc that is recorded in Multi Session When the first track of the first session is audio CD data: Only audio CD data of the first session is played back. Any data in subsequent sessions is skipped. When the first track of the first session is not audio CD data: If an MP3 file is in the disc, only MP3 file(s) is played back and other data is skipped. (Audio CD data is not recognized.) If no MP3 file is in the disc, NO MUSIC is displayed and nothing is played back. (Audio CD data is not recognized.) The playback order of the MP3 files The playback order of the folders and files is as follows: Folder (album) MP3 file (track) Tree 1 (root) Tree 2 Tree 3 Tree 4 Tree 5 Notes A folder that does not include an MP3 file is skipped. When you insert a disc with many trees, it takes a longer time to start playback. We recommend that you make only one or two trees for each disc. Maximum folder number: 150 (including root folder and empty folders) The maximum number of MP3 files and folders that can be contained in a disc: 300 When a file/folder name contains many characters, this number may become less than 300. Tip To specify a desired playback order, before the folder or file name, input the order by number (e.g., 01, 02 ), then record contents onto a disc. (The order differs depending on the writing software.) 8

9 Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Remove the front panel and press the RESET button with a pointed object, such as a ballpoint pen. RESET button Note Pressing the RESET button will erase the clock setting and some stored contents. Detaching the front panel You can detach the front panel of this unit to protect the unit from being stolen. Caution alarm If you turn the ignition switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional amplifier and do not use the built-in amplifier, the beep sound will be deactivated. 1 Press (OFF)*. CD playback or radio reception stops (the key illumination and display remain on). * If your car has no ACC (accessory) position on the ignition switch, be sure to turn the unit off by pressing (OFF) until the display disappears to avoid car battery drain. 2 Press, then pull it off towards you. (OFF) OPEN/EJECT Notes If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. Do not drop or put excessive pressure on the front panel and its display window. Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Tip When carrying the front panel with you, use the supplied front panel case. continue to next page t 9

10 Attaching the front panel Attach part A of the front panel to part B of the unit as illustrated and push the left side into position until it clicks. Setting the clock The clock uses a 12-hour digital indication. Example: To set the clock to 10:08 OPEN/EJECT 1 Press (DSPL) for 2 seconds. The hour indication flashes. Note Do not put anything on the inner surface of the front panel. 1Press the volume +/ button to set the hour. 2Press (SEL). The minute indication flashes. 3Press the volume +/ button to set the minute. 2 Press (DSPL). The clock starts. After the clock setting is completed, the display returns to normal play mode. 10

11 CD Player To eject the disc 1 Open the shutter. Playing a disc 1 Open the shutter. 2 Push down the shutter. 2 Insert the disc labelled side up. Playback starts automatically. 3 Close the shutter. If a disc is already inserted, press (SOURCE) repeatedly until CD appears to start playback. To Stop playback Skip tracks Automatic Music Sensor Fast-forward/ reverse Manual Search Press (OFF) (SEEK) ( /+) (./>) [once for each track] (SEEK) ( /+) (m/m) [hold to desired point] Skip albums* (1)(ALBUM ) or Albums selection (2)(ALBUM+) The disc is ejected. Notes While ejecting or inserting a disc, do not close the shutter. The disc may be caught and damaged. A disc may be ejected if you open the shutter forcefully. Before playing a track, this unit reads all track and album information on the disc. Depending on the track structure, it may take more than a minute before playback begins. During this time, READ is displayed. Please wait for play to start automatically when the reading is complete. Depending on the condition of the disc, it may not play back (page 6, 7). While the first/last track on the disc is playing, if (SEEK) ( ) or (SEEK) (+) is pressed, playback skips to the last/first track of the disc. When the last track on the disc is over, playback restarts from the first track of the disc. If you play a high-bit rate MP3 file such as 320 kbps, sound may be intermittent. Tip A disc can be played with the shutter opened or closed. * Available only when an MP3 file is played. To skip tracks continuously, press (SEEK) (+) or (SEEK) ( ), then press again within 2 seconds and hold. 11

12 12 Display items When the disc/album/track changes, any prerecorded title* 1 of the new disc/album/track is automatically displayed (if A.SCRL (Auto Scroll) is set to ON, names exceeding 8 characters will be scrolled (page 16)). Source Displayable items Track number/elapsed playing time Disc name* 1 /Artist name* 2 Album (folder) name* 3 Track (file) name* 1 * 3 ID3 tag* 3 Clock To Press Switch display item (DSPL) Scroll display item (SCRL) *1 When pressing (DSPL), NO NAME indicates that there is no prerecorded name to display. *2 Only for CD TEXT discs with the artist name. *3 Only for MP3 files. Only track name/artist name/album name in ID3 tag is displayed. When pressing (DSPL), NO ID3 indicates that there is no ID3 tag to display. Notes Some characters cannot be displayed. For some CD TEXT discs with very many characters, information may not scroll. This unit cannot display the artist name for each track of a CD TEXT disc. Notes on MP3 ID3 tag applies to version 1.0, 1.1, 2.2, 2.3 and 2.4. Some characters and signs cannot be displayed (appear as * ). The maximum number of displayable characters for an album (folder) name/ track (file) is 64 (Romeo) or 32 (Joliet); ID3 tag 30 characters (1.0, 1.1, 2.2 and 2.3) or 126 characters (2.4). In the following cases, elapsed playing time may not be displayed accurately. when an MP3 file of VBR (variable bit rate) is played. during fast-forward/reverse. Tips When A.SCRL (Auto Scroll) is set to OFF and the disc/album/track is changed, the disc/album/track name does not scroll. When an MP3 file is played and the album is changed, the new album number is displayed. Playing tracks repeatedly Repeat Play You can select: REP-TRACK to repeat the current track. REP-ALBM* to repeat the tracks in the current album. * Available only when an MP3 file is played. During playback, press (3) (REP) repeatedly until the desired setting appears in the display. Repeat Play starts. To return to normal play mode, select REP-OFF. Playing tracks in random order Shuffle Play You can select: SHUF-ALBM* to play the tracks in the current album in random order. SHUF-DISC to play the tracks in the disc in random order. * Available only when an MP3 file is played. During playback, press (4) (SHUF) repeatedly until the desired setting appears in the display. Shuffle Play starts. To return to normal play mode, select SHUF-OFF.

13 Radio The unit can store up to 6 stations per band (FM1, FM2, FM3, AM1 and AM2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. Storing stations automatically Best Tuning Memory (BTM) The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press (BTM) for 2 seconds. The unit stores stations in the order of their frequencies on the number buttons. A beep sounds when the setting is stored. Notes If only a few stations can be received due to weak signals, some number buttons will retain their former settings. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. Receiving the stored stations 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press the number button ((1) to (6)) on which the desired station is stored. If preset tuning does not work Automatic tuning/local Seek Mode Automatic tuning: Press (SEEK) (+) or (SEEK) ( ) to search for the station. Scanning stops when the unit receives a station. Repeat the operation until the desired station is received. Local Seek Mode: If the automatic tuning stops too frequently, press (SENS) repeatedly until LOCAL-ON appears in the display. Only the stations with relatively strong signals will be tuned in. To cancel the local seek mode, press (SENS) twice when receiving FM. Note When receiving AM, to cancel the local seek mode, press (SENS) ( LOCAL-OFF appears). Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) (+) or (SEEK) ( ) to locate the approximate frequency, then press (SEEK) (+) or (SEEK) ( ) repeatedly to fine adjust to the desired frequency (manual tuning). If FM stereo reception is poor Monaural Mode During radio reception, press (SENS) repeatedly until MONO-ON appears in the display. The sound improves, but becomes monaural ( ST disappears). To return to normal radio reception mode, press (SENS) ( MONO-OFF appears). 13

14 Storing only the desired stations You can manually preset the desired stations on any chosen number button. 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press (SEEK) (+) or (SEEK) ( ) to tune in the station that you want to store. 4 Press the desired number button ((1) to (6)) for 2 seconds until MEM appears. The number button indication appears in the display. Note If you try to store another station on the same number button, the previously stored station will be erased. Other Functions You can also control the unit with a rotary commander (optional). Using the rotary commander First, attach the appropriate label depending on how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls. SEL MODE DSPL DSPL MODE SEL By pressing buttons (SEL) (ATT) (MODE) (SOURCE) OFF (DSPL) Rotate the VOL control to adjust the volume. (OFF) Press (SOURCE) (MODE) (ATT) (OFF)* 1 (SEL) (DSPL) To Change the source (Radio/CD)/Power on Change radio band Attenuate the sound Stop playback or radio reception/power off Adjust and select Change the display item 14

15 By rotating the control Changing the operative direction The operative direction of controls is factory-set as shown below. To increase SEEK/AMS control Rotate and release to: Skip tracks. To continuously skip tracks, rotate once and rotate again within 2 seconds and hold the control. Tune in stations automatically. Rotate, hold, and release to: Fast-forward/reverse a track. Find a station manually. To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. By pushing in and rotating the control Press (SEL) for 2 seconds while pushing the VOL control. PRESET control Push in and rotate the control to: Receive preset stations. Change albums* 2. *1 If your car has no ACC (accessory) position on the ignition key switch, after turning off the ignition, be sure to press and hold (OFF) until the display disappears. *2 Available only when an MP3 file is played. When an MP3 file is played, you can select an album using the rotary commander. To Do this Skip albums Push in and rotate [once for Album selection each album] the control. To continuously skip albums, push in and rotate (and hold) the control. 15

16 Adjusting the sound characteristics You can adjust the balance, fader, low pass filter and subwoofer volume. 1 Press (SEL) repeatedly until BAL, FAD, LPF or SUB appears. Each time you press (SEL), the item changes as follows: LOW* 1 t MID* 1 t HI* 1 t BAL (left-right) t FAD (front-rear) t LPF (low pass filter)* 2 * 3 t SUB (subwoofer volume)* 2 * 4 *1 When EQ3 is activated (page 17). *2 When SUB is selected (page 16). *3 The cut off frequency is adjustable to 78 Hz, 125 Hz or OFF. *4 The volume level is adjustable between 10 and +10 steps. (Below 10, ATT is displayed.) 2 Press the volume +/ button to adjust the selected item. Note Adjust within 3 seconds after selecting the item. Changing the sound and display settings Menu The following items can be set: Set up REAR/SUB* 1 to switch the audio output REAR or SUB. Select REAR to output to a power amplifier. Select SUB to output to a subwoofer. A.SCRL (Auto Scroll)* 2 (page 12) DEMO* 1 to turn the demonstration display on or off. Select ON to activate the demonstration display (The demonstration starts about 10 seconds after the unit is turned off). Select OFF to deactivate the demonstration display. BEEP to turn the beeps on or off. DIM to change the brightness of the display. Select ON to dim the display. Select OFF to deactivate the Dimmer. Quickly attenuating the sound Press (ATT). After ATT-ON momentarily appears, ATT appears in the display. To restore the previous volume level, press (ATT) again. 16

17 Switching the REAR/SUB* 1 Press (SEL) and then press the volume + (REAR) or (SUB) button. After 3 seconds, the display returns to normal play mode. Selecting the desired item Press (SEL) and the desired button simultaneously. (SEL) + (3): A.SCRL* 2 (SEL) + (4): DEMO* 1 (SEL) + (6): BEEP (SEL) + (DSPL): DIM After the mode setting is completed, the display returns to normal play mode. To cancel the item, press (SEL) and the desired button simultaneously again. *1 When the unit is turned off. *2 When no CD is playing, this item will not appear. Setting the equalizer (EQ3) You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM and OFF (equalizer OFF)). You can store a different equalizer setting for each source. Selecting the equalizer curve 1 Press (SOURCE) to select a source (Radio or CD). 2 Press (EQ3) repeatedly until the desired equalizer curve. Each time you press (EQ3), the item changes. To cancel the equalizing effect, select OFF. continue to next page t 17

18 Adjusting the equalizer curve You can store and adjust the equalizer settings for different tone ranges. 1 Press (SOURCE) to select a source (Radio or CD). 2 Press (EQ3) repeatedly to select the desired equalizer curve. 3 Adjusting the equalizer curve. 1 Press (SEL) repeatedly to select the desired tone range. Each time you press (SEL), the tone range changes. LOW t MID t HI (t BAL t FAD t LPF t SUB) 2 Press the volume +/ button repeatedly to adjust to the desired volume level. The volume level is adjustable by 1 db steps from 10 db to +10 db. Additional Information Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Fuse (10 A) 3 Repeat step 1 and 2 to adjust the equalizer curve. To restore the factory-set equalizer curve, press (SEL) for 2 seconds. Note When EQ3 is set to OFF, you cannot adjust the equalizer curve settings. Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 9) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged. Main unit Back of the front panel 18 Notes For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. Never touch the connectors directly with your fingers or with any metal device.

19 Replacing the lithium battery Under normal conditions, battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion. Removing the unit 1 Remove the protection collar. 1 Detach the front panel (page 9). 2 Engage the release keys together with the protection collar. Orient the release key correctly. x + side up 3 Pull out the release keys to remove the protection collar. Notes on lithium battery Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to assure a good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. continue to next page t WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. 19

20 2 Remove the unit. 1 Insert both release keys together until they click. Face the hook inwards. 2 Pull the release keys to unseat the unit. 3 Slide the unit out of the mounting. 20

21 Specifications CD Player section Signal-to-noise ratio 120 db Frequency response 10 20,000 Hz Wow and flutter Below measurable limit Tuner section FM Tuning range Aerial terminal Intermediate frequency Usable sensitivity Selectivity Signal-to-noise ratio FM tuning interval: 50 khz/200 khz switchable MHz (at 50 khz step) MHz (at 200 khz step) External aerial connector 10.7 MHz/450 khz 9 dbf 75 db at 400 khz 67 db (stereo), 69 db (mono) Harmonic distortion at 1 khz 0.5 % (stereo), 0.3 % (mono) Separation Frequency response AM Tuning range Aerial terminal Intermediate frequency Sensitivity 30 µv 35 db at 1 khz 30 15,000 Hz AM tuning interval: 9 khz /10 khz switchable 531 1,602 khz (at 9 khz step) 530 1,710 khz (at 10 khz step) External aerial connector 10.7 MHz/450 khz General Outputs Inputs Tone controls Power requirements Dimensions Mounting dimensions Mass Supplied accessories Optional accessories Audio outputs terminal (rear/sub switchable) Power aerial relay control terminal Power amplifier control terminal Remote controller input terminal Aerial input terminal Low: ±10 db at 60 Hz (XPLOD) Mid: ±10 db at 1 khz (XPLOD) High: ±10 db at 10 khz (XPLOD) 12 V DC car battery (negative earth) Approx mm (w/h/d) Approx mm (w/h/d) Approx. 1.2 kg Parts for installation and connections (1 set) Front panel case (1) Card remote commander RM-X114 Rotary commander RM-X4S Design and specifications are subject to change without notice. Power amplifier section Outputs Speaker outputs (sure seal connectors) Speaker impedance 4 8 ohms Maximum power output 52 W 4 (at 4 ohms) 21

22 Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General No sound. Press the volume + button to adjust the volume. Cancel the ATT function. Set the fader control to the centre position for a 2-speaker system. The contents of the memory have been erased. The RESET button has been pressed. t Store again into the memory. The power lead or battery has been disconnected. The power connecting lead is not connected properly. No beep sound. The beep sound is cancelled (page 16). An optional power amplifier is connected and you are not using the built-in amplifier. The display disappears from/does not appear in the display window. The display disappears if you press and hold (OFF). t Press and hold (OFF) again until the display appears. Remove the front panel and clean the connectors. For details, see Cleaning the connectors on page 18. Stored stations and correct time are erased. The fuse has blown. Makes noise when the ignition key is in the ON, ACC, or OFF position. The leads are not matched correctly with the car s accessory power connector. No power is being supplied to the unit. Check the connection. If everything is in order, check the fuse. The car does not have an ACC position. t Press (SOURCE) (or insert a disc) to turn on the unit. The power is continuously supplied to the unit. The car does not have an ACC position. The power aerial does not extend. The power aerial does not have a relay box. CD playback A disc cannot be loaded. Another CD is already loaded. The CD has been forcibly inserted upside down or in the wrong way. Playback does not begin. Defective or dirty CD. CD-R/CD-RW that is not finalized. You tried to play back a CD-R/CD-RW not designed for audio use. Some CD-Rs/CD-RWs may not play due to its recording equipment or the disc condition. MP3 files cannot be played back. Recording was not performed according to the ISO 9660 level 1 or level 2 format, or the Joliet or Romeo in the expansion format. The file extension.mp3 is not added to the file name. Files are not stored in MP3 format. MP3 files take longer to play back than others. The following discs take a longer time to start playback. a disc recorded with complicated tree structure. a disc recorded in Multi Session. a disc to which data can be added. A disc is automatically ejected. The ambient temperature exceeds 50 C. The operation buttons do not function. CD will not be ejected. Press the RESET button. The sound skips from vibration. The unit is installed at an angle of more than 45. The unit is not installed in a sturdy part of the car. The sound skips. Dirty or defective disc. 22

23 Radio reception Preset tuning is not possible. Store the correct frequency in the memory. The broadcast signal is too weak. The stations cannot be received. The sound is hampered by noises. Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car s aerial booster (only when your car has built-in FM/AM aerial in the rear/side glass). Check the connection of the car aerial. The auto aerial will not go up. t Check the connection of the power aerial control lead. Check the frequency. Automatic tuning is not possible. The local seek mode is set to ON. t Set the local seek mode to OFF (page 13). The broadcast signal is too weak. t Perform manual tuning. The ST indication flashes. Tune in the frequency accurately. The broadcast signal is too weak. t Set the monaural reception mode to ON (page 13). A programme broadcast in stereo is heard in monaural. The unit is in monaural reception mode. t Cancel monaural reception mode (page 13). Error displays/messages Error displays The following indications will flash for about 5 seconds, and an alarm sound will be heard. ERROR A CD is dirty or inserted upside down. t Clean or insert the CD correctly. A CD cannot play because of some problem. t Insert another CD. FAILURE The connection of speakers/amplifiers is incorrect. t See the installation guide manual of this model to check the connection. NO MUSIC A CD which is not a music file is inserted in this unit. t Insert a music CD in this unit. OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. RESET The CD unit cannot be operated because of some problem. t Press the RESET button on the unit. Messages L.SEEK +/ The local seek mode is on during automatic tuning (page 13). or You have reached the beginning or the end of the disc and you cannot go any further. If these solutions do not help improve the situation, consult your nearest Sony dealer. 23

24 Bienvenido Gracias por adquirir este reproductor de discos compactos Sony. Disfrutará aún más de sus distintas funciones con: Reproducción de archivos MP3. Pueden reproducirse discos CD-R/CD-RW a los que pueden añadirse sesiones (página 7). Los discos grabados en Multi Session se pueden reproducir, según el método de grabación (página 8). Información CD TEXT (se muestra al reproducir discos CD TEXT* 1 ). Información de la versión 1.0, 1.1, 2.2, 2.3 ó 2.4 del indicador ID3* 2 (se muestra al reproducir un archivo MP3). Accesorios de controlador opcionales Control remoto de tarjeta RM-X114 Mando rotatorio RM-X4S *1 Un disco CD TEXT es un CD de audio que incluye información como el nombre del disco, el nombre del artista y los nombres de las pistas. Esta información está grabada en el disco. *2 El indicador ID3 es un archivo MP3 que contiene información sobre el nombre del álbum, el nombre del artista, el nombre de la pista, etc. Esta etiqueta está situada en la parte inferior del chasis. 2

25 Tabla de contenido Ubicación de los controles Precauciones Notas sobre los discos Acerca de los archivos MP Procedimientos iniciales Restauración de la unidad Extracción del panel frontal Ajuste del reloj Reproductor de CD Reproducción de discos Elementos de la pantalla Reproducción repetida de pistas Reproducción repetida Reproducción de pistas en orden aleatorio Reproducción aleatoria Radio Almacenamiento automático de emisoras Memoria de la mejor sintonía (BTM) Recepción de las emisoras memorizadas Almacenamiento de las emisoras deseadas Otras funciones Uso del mando rotatorio Ajuste de las características de sonido Atenuación rápida del sonido Cambio de los ajustes de sonido y la pantalla Menú Ajuste del ecualizador (EQ3) Información complementaria Mantenimiento Extracción de la unidad Especificaciones Solución de problemas Mensajes/indicaciones de error

26 Ubicación de los controles Consulte las páginas indicadas para obtener información detallada. ATT OFF DSPL EQ3 SEEK SOURCE MODE SEL REP ALBUM + SHUF SENS SCRL BTM CDX-R3300 CDX-R3300S a Botón volumen +/ b Botón ATT (atenuación) 17 c Botón DSPL (cambio del modo de indicación) 11, 13 d Obturador OPEN/EJECT 11, 12 e Pantalla f Botón EQ3 19 g Botón OFF (detener/apagar)* 10, 12 h Botón SEEK +/ Radio: Sintonización automática de emisoras/ localización manual de una emisora. CD (archivos MP3): Omisión de pistas/avance o retroceso rápido de una pista. i Botón (extracción del panel frontal) 10 j Botón SOURCE (encendido/radio/cd) Para seleccionar la fuente. k Botón MODE Para cambiar el funcionamiento. l Botón SEL (selección) Para seleccionar elementos. m Botón RESET (ubicado en la parte frontal de la unidad, detrás del panel frontal) 9 n Botones numéricos 18 Radio: Para almacenar la emisora deseada en cada botón numérico. Archivos MP3: (1): ALBUM 12 (2): ALBUM + 12 CD: (3): REP 14 (4): SHUF 14 o Selector de frecuencias (ubicado en la parte inferior de la unidad) Consulte la sección Selector de frecuencias en el manual Instalación/ Conexiones. p Botón SENS 15 q Botón SCRL (desplazamiento) 13 r Botón BTM 14 s Receptor del control remoto de tarjeta * Advertencia sobre la instalación en un automóvil sin posición ACC (accesorio) en el interruptor de encendido Después de apagar el motor, asegúrese de presionar (OFF) en la unidad hasta que se apague la pantalla. Si no lo hace, la pantalla no se desactiva y se descarga la batería. 4

27 Control remoto de tarjeta RM-X114 (opcional) Selección de un álbum con el control remoto de tarjeta Utilice los botones DISC (ALBUM) (+/ ) del control remoto de tarjeta para omitir el álbum. DSPL MENU PRESET + DISC + MODE LIST Para Omitir álbumes* 2 Selección de álbumes Presione + o [una vez por cada álbum] Para omitir álbumes continuamente, mantenga presionado cualquier botón. SEEK SOURCE SEEK+ *2 Disponible únicamente cuando se reproduce un archivo MP3. SOUND OFF DISC PRESET + VOL ENTER ATT Omisión continua de pistas Presione (SEEK) (+) o (SEEK) ( ) una vez en el control remoto de tarjeta, vuélvalo a presionar antes de que pasen 2 segundos y manténgalo presionado. Los botones correspondientes del control remoto de tarjeta controlan las mismas funciones que los de esta unidad. a Botón DSPL b Botón MENU* 1 c Botón SOURCE d Botones SEEK ( /+) e Botón SOUND f Botón OFF g Botones VOL (+/ ) h Botón MODE i Botón LIST* 1 j Botones DISC* 1 (ALBUM)/ PRESET (+/ ) k Botón ENTER* 1 l Botón ATT *1 No disponible en esta unidad Nota Si la pantalla se apaga al presionar (OFF), no podrá usarse con el control remoto de tarjeta a menos que se presione (SOURCE) en la unidad o que se inserte un disco para que dicha unidad se active primero. Sugerencia Para obtener información detallada sobre cómo cambiar las pilas, consulte Sustitución de la pila de litio en la página 21. 5

28 Precauciones Si estaciona el automóvil bajo la luz directa del sol, deje que la unidad se enfríe antes de usarla. La antena motorizada se extenderá automáticamente mientras la unidad se encuentra en funcionamiento. Si desea realizar alguna consulta o solucionar algún problema relativo a la unidad que no se trate en este manual, póngase en contacto con el distribuidor Sony más cercano a su domicilio. Condensación de humedad En días lluviosos o en zonas muy húmedas, es posible que se condense humedad dentro de las lentes y la pantalla de la unidad. Si esto ocurre, la unidad no funcionará correctamente. En este caso, extraiga el disco y espere una hora aproximadamente hasta que se haya evaporado la humedad. Para mantener una alta calidad de sonido Asegúrese de no derramar ningún tipo de bebida o refresco sobre la unidad ni los discos. Notas sobre los discos Para mantener los discos limpios, no toque su superficie. Tómelos por los bordes. Guarde los discos en sus cajas o en los cargadores de discos cuando no los use. No someta los discos al calor ni a altas temperaturas. Evite dejarlos en un automóvil estacionado o sobre el tablero o la bandeja trasera. No adhiera etiquetas, ni utilice discos con residuos o tinta pegajosos. Tales discos pueden dejar de girar durante el uso, causando fallas de funcionamiento, o pueden dañarse. No use discos con etiquetas o engomados. Su uso puede producir las siguientes fallas de funcionamiento: Imposibilidad de expulsar el disco (dado que se despegó la etiqueta o el engomado y se obstruye el mecanismo de expulsión). Imposibilidad de leer los datos de audio correctamente (por ejemplo, se interrumpe la reproducción o simplemente no la hay) debido a que el calor contrae el engomado o la etiqueta y hace que el disco se deforme. Los discos con formas no estandarizadas (p. ej. con forma de corazón, cuadrado o estrella) no pueden reproducirse en esta unidad. Si lo intenta, puede dañar la unidad. No los utilice. No se pueden reproducir discos compactos de 8 cm. 6

29 Antes de realizar la reproducción, limpie los discos con un paño de limpieza disponible en el mercado. Hágalo desde el centro hacia los bordes. No use solventes como bencina, diluyentes, productos de limpieza disponibles en el mercado ni aerosoles antiestáticos para discos analógicos. Notas sobre los CD-R (CD grabables) y CD-RW (CD regrabables). En esta unidad se pueden reproducir los siguientes discos: Tipo de disco Etiqueta del disco Audio CD Discos de música codificados con protección de los derechos de autor Este producto ha sido diseñado para reproducir discos que cumplen con el estándar Compact Disc (CD). Desde hace poco tiempo, algunas compañías discográficas comercializan discos de música codificados con protección de derechos de autor. Tenga en cuenta que, entre estos discos, algunos no cumplen con el estándar CD, por lo que no podrán reproducirse con este producto. Archivos MP3 Según el estado del disco o el equipo utilizado para su grabación, es posible que algunos discos CD-R/CD-RW no puedan reproducirse en esta unidad. No es posible reproducir un disco CD-R o un CD-RW que no esté finalizado*. Puede reproducir archivos MP3 grabados en CD-ROM, CD-R y CD-RW. Pueden reproducirse CD-R/CD-RW a los que puede añadirse una sesión. * Proceso necesario para reproducir en el reproductor de CD de audio discos CD-R o CD-RW grabados. 7

30 Acerca de los archivos MP3 MP3 (MPEG 1 Audio Layer-3) es una tecnología y formato estándar para la compresión de una secuencia de sonido. El archivo se comprime a casi 1/10 de su tamaño original. Se comprimen los sonidos que no percibe el oído humano, mientras que los que sí pueden oírse no se comprimen. Notas sobre los discos Puede reproducir archivos MP3 grabados en CD- ROM, CD-R y CD-RW. El disco debe tener formato de nivel 1 o nivel 2 de ISO 9660* 1, o la norma Joliet o Romeo si está en formato de expansión. Puede usar un disco grabado en Multi Session* 2. *1 Formato ISO 9660 La norma internacional más utilizada para el formato lógico de archivos y carpetas en un CD-ROM. Existen varios niveles de especificaciones. En el nivel 1, los nombres de los archivos deben ajustarse al formato de 8,3 (8 caracteres como máximo en el nombre y 3 caracteres como máximo en la extensión.mp3 ) y escribirse en mayúsculas. Los nombres de las carpetas no pueden superar los 8 caracteres. No se permiten más de 8 niveles de carpetas anidadas. Las especificaciones del nivel 2 permiten nombres de hasta 31 caracteres. Cada carpeta puede tener hasta 8 árboles. Con respecto al formato de expansión conforme a la norma Joliet o Romeo, revise el contenido del software de escritura, etc. Notas En el caso de formatos que no sean ISO 9660 de nivel 1 o nivel 2, es posible que los nombres de las carpetas y de los archivos no se vean correctamente. Al asignar nombres, asegúrese de añadir la extensión de archivo.mp3 al nombre del archivo. Si asigna la extensión.mp3 a un archivo que no sea un MP3, la unidad no podrá reconocer el archivo correctamente y generará un ruido que podría dañar los altavoces. El inicio de la reproducción tarda algo más de tiempo en los siguientes discos: disco grabado con una estructura de árbol complicada. disco grabado en Multi Session. disco al que es posible añadir datos. Precauciones que debe tomar al reproducir un disco grabado en Multi Session Cuando la primera pista de la primera sesión sea de datos de CD de audio: Sólo se reproducen los datos de CD de audio de la primera sesión. Se omitirá cualquier dato en las sesiones posteriores. Cuando la primera pista de la primera sesión no sea de datos de CD de audio: Si el disco contiene un archivo MP3, sólo se reproducirán archivos MP3 y los demás datos se omitirán (los datos de CD de audio no se reconocen). Si el disco no contiene ningún archivo MP3, aparece el mensaje NO MUSIC y no hay reproducción (los datos de CD de audio no se reconocen). *2 Multi Session Se refiere a un método de grabación que permite añadir datos con el método Track-At- Once. Los CD convencionales comienzan en un área de control del CD denominada Delimitador de inicio y finalizan en un área llamada Delimitador de fin. Un CD Multi Session es un CD que posee muchas sesiones y en el cual cada segmento entre los delimitadores de inicio y de fin se considera como una sola sesión. CD Extra: se trata del formato que graba datos de audio (datos de audio de CD) como pistas en la sesión 1 y que graba datos como pistas en la sesión 2. CD combinado: en este formato, los datos se graban como pista 1 y los datos de audio (datos de audio de CD) se graban como pista 2. 8

31 Orden de reproducción de los archivos MP3 El orden de reproducción de las carpetas y archivos es el siguiente: Procedimientos iniciales Carpeta (álbum) Archivo MP3 (pista) 3 Restauración de la unidad Antes de usar la unidad por primera vez, o después de sustituir la batería del automóvil o de cambiar las conexiones, debe restaurarla. Extraiga el panel frontal y presione el botón RESET con un objeto puntiagudo como, por ejemplo, un bolígrafo Botón RESET Nota Al presionar RESET, se borra el ajuste del reloj y algunos contenidos memorizados Árbol 1 (raíz) Árbol 2 Árbol 3 Árbol 4 Árbol 5 Notas Toda carpeta que no incluya un archivo MP3 se omitirá. Cuando inserta un disco con muchos árboles, la reproducción tarda más para iniciarse. Se recomienda crear sólo uno o dos árboles para cada disco. Cantidad máxima de carpetas: 150 (incluidas la carpeta raíz y las vacías) El número máximo de archivos y carpetas MP3 que un disco puede contener: 300 Si un nombre de archivo o carpeta contiene muchos caracteres, este número puede reducirse a menos de 300. Sugerencia Si desea especificar un orden de reproducción dado, antes del nombre de la carpeta o archivo, ingrese el orden por número (por ej., 01, 02 ), luego grabe el contenido en el disco (el orden varía según el software de escritura). 9

32 Extracción del panel frontal Puede extraer el panel frontal de esta unidad para evitar que la roben. Alarma de precaución Si gira la llave de encendido hasta la posición OFF sin haber extraído el panel frontal, la alarma de precaución sonará durante unos segundos. Si conecta un amplificador opcional y no usa el integrado, el sonido se desactiva. 1 Presione (OFF)*. Se detiene la reproducción de CD o la recepción de la radio (la iluminación de las teclas y la pantalla permanecen activados). * Si el automóvil no tiene una posición ACC (accesorio) en el interruptor de encendido, asegúrese de apagar la unidad presionando (OFF) hasta que se apague la pantalla para evitar que se descargue la batería del auto. 2 Presione y, a continuación, extraiga el panel frontal hacia usted. Instalación del panel frontal Fije la parte A del panel frontal en la parte B de la unidad, tal como muestra la ilustración, y presione el lado izquierdo hasta que encaje. OPEN/EJECT Nota No coloque nada sobre la superficie interior del panel frontal. (OFF) OPEN/EJECT Notas Si extrae el panel con la unidad encendida, la alimentación se desactiva automáticamente para evitar que los altavoces se dañen. No deje caer el panel frontal ni su pantalla. Tampoco ejerza excesiva presión sobre éstos. No someta el panel frontal al calor ni a temperaturas altas o humedad. Evite dejarlo en un automóvil estacionado o sobre el tablero o la bandeja trasera. Sugerencia Al transportar el panel frontal, utilice el estuche suministrado. 10

33 Ajuste del reloj El reloj emplea una indicación digital de 12 horas. Ejemplo: para ajustar el reloj a las 10:08 1 Presione (DSPL) durante 2 segundos. La indicación de hora parpadea. Reproductor de CD Reproducción de discos 1 Abra el obturador. 1 Presione el botón Volumen +/ para ajustar la hora. 2 Presione (SEL). La indicación de minutos parpadea. 3 Presione el botón Volumen +/ para ajustar los minutos. 2 Presione (DSPL). 2 Inserte el disco con la etiqueta orientada hacia arriba. El reloj se pone en funcionamiento. Al finalizar el ajuste del reloj, la pantalla vuelve al modo de reproducción normal. La reproducción se inicia automáticamente. 3 Cierre el obturador. continúa en la página siguiente t 11

34 Si ya hay un disco insertado, presione (SOURCE) varias veces hasta que aparezca CD para iniciar la reproducción. Para Presione Detener la (OFF) reproducción Omitir pistas (SEEK) ( /+) Sensor de música (./>) automático [una vez por pista] Avanzar/retroceder rápidamente Búsqueda manual Omitir álbumes* Selección de álbumes (SEEK) ( /+) (m/m) [manténgalo presionado hasta alcanzar el punto deseado] (1)(ALBUM ) o (2)(ALBUM+) * Disponible únicamente cuando se reproduce un archivo MP3. Para omitir pistas continuamente, presione (SEEK) (+) o (SEEK) ( ), vuelva a presionarlo antes de que transcurran 2 segundos y manténgalo presionado. Notas No cierre el obturador mientras expulse o inserte un disco, puesto que podría bloquearse y dañar el disco. Si abre el obturador a la fuerza, es posible que se expulse el disco. Antes de reproducir una pista, la unidad lee la información de todas las pistas y álbumes del disco. En función de la estructura de las pistas, es posible que la reproducción tarde más de un minuto en iniciarse. Durante este tiempo, aparece READ en la pantalla. Espere hasta que la reproducción se inicie automáticamente una vez terminada la lectura. Según las condiciones del disco, es posible que éste no se reproduzca (página 6, 8). Si al reproducir la primera o última pista del disco, presiona (SEEK) ( ) o (SEEK) (+), saltará a la última o primera pista del mismo. Cuando finalice la última pista del disco, la reproducción se reiniciará a partir de la primera pista. Si reproduce un archivo MP3 de elevada tasa de bits, como 320 kbps, es posible que el sonido sea discontinuo. Sugerencia Un disco puede reproducirse mientras el obturador esté abierto o cerrado. Para expulsar el disco 1 Abra el obturador. 2 Presiónelo. El disco se expulsa. 12