KP-FR43M96

Size: px
Start display at page:

Download "KP-FR43M96"

Transcription

1 (2) Projection TV Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Mode d emploi Avant de faire fonctionner cet appareil, lisez attentivement le présent mode d emploi et conservez-le pour toute référence ultérieure. GB F CT Panduan Pengendalian Sebelum mengendalikan unit, sila baca buku panduan ini dengan teliti dan simpan untuk rujukan masa depan. MY,, P A KP-F43 KP-F Sony Corporation M96 M9

2 2

3 WANING To prevent fire or shock hazard, do not expose the projection TV to rain or moisture. Dangerously high voltages are present inside the projection TV. Do not open the cabinet. efer servicing to qualified personnel only. For general safety: Do not expose the projection TV to rain or moisture. Do not open the rear cover. For safe installation: Do not block the ventilation openings. Do not install the projection TV in hot, humid or excessively dusty places. Do not install the projection TV where it may be exposed to mechanical vibrations. Avoid operating the projection TV at temperatures below 5 C (4 F). If the projection TV is transported directly from a cold to a warm location, or if the room temperature has changed suddenly, the picture may be blurred or show poor color. This is because moisture has condensed on the mirror or lenses inside. If this happens, let the moisture evaporate before using the projection TV. To obtain the best picture, do not expose the screen to direct illumination or direct sunlight. It is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery. It is desirable to install the projection TV in a room where the floor and walls are not of reflecting material. If necessary, cover them with dark carpeting or wall paper. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. For safe operations: Do not operate the projection TV on anything but V AC, 50/60 Hz. Do not operate the projection TV if any liquid or solid object falls in it have it checked immediately. Do not keep the projection TV plugged in if you are not going to use it for several days. Even if your projection TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Do not pull the power cord to disconnect the projection TV. Pull it out by the plug. Do not plug in too many appliances to the same power socket. Do not damage the power cord. Do not place any objects on the projection TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Install the projection TV on a stable projection TV stand and floor which can support the projection TV set weight. Ensure that the projection TV stand surface is flat and its area is larger than the bottom area of the projection TV. Do not carry the projection TV holding the screen edges. Caution When using TV games, computers, and similar products with your projection TV, keep the brightness and contrast functions at low settings. If a fixed (non-moving) pattern is left on the screen for long periods of time at a high brightness or contrast setting, the image can be permanently imprinted onto the screen. These types of imprints are not covered by your warranty. Cleaning the Screen To clean the screen with a cloth, please use a cleaning cloth lightly moistened with water. Do not use any type of abrasive pad, alkaline cleaner, scouring powder or solvent, such as alcohol or benzine. As a safety precaution, unplug the projection TV before cleaning it. Do not rub, touch, or tap the surface of the screen with sharp or abrasive items, like a ball point pen or a screw driver. Otherwise, this type of contact may result in a scratched screen. GB 3

4 WEGA GATE WEGA GATE POG POG WEGA GATE POG WEGA GATE POG Using Your New Projection TV x Install the projection TV For the best picture quality, install the projection TV within the areas below. Optimum viewing area (Horizontal) KP-F43 KP-F53 min..9 m min..7 (6 ft.) (5.6 ft.) min. 2.4 m (8 ft.) Optimum viewing area (Vertical) KP-F43 KP-F53 min..9 m (6 ft.) min. 2.4 m (8 ft.) Using Your New Projection TV

5 Table of Contents Using Your New Projection TV Installation Getting Started... 6 Setting up your projection TV ( Initial Setup )... 7 Overview of Controls Projection TV front, inside the dropdown and rear panels... 9 Using the remote control and basic functions... 0 Advanced Operations Selecting the picture and sound modes... 2 Enjoying the WEGA Theatre Mode with center speaker... 3 Viewing two programs at the same time (KP-F53M96 only)... 4 Displaying multiple programs (KP-F53M96 only)... 5 Enjoying stereo or bilingual programs... 6 Viewing Teletext... 7 Operating optional components... 8 Menu Adjustment Introducing the WEGA GATE navigator... 9 Settings Adjustment Changing the Picture setting Changing the Sound setting Changing the Wide Screen setting Changing the Multi Picture setting (KP-F53M96 only) Changing the Channel Setup setting Changing the Setup setting Additional Information Connecting optional components Troubleshooting Specifications... Back cover GB Using Your New projection TV 5

6 Installation x Getting Started Step b b Initial Setup anguage: English Insert the batteries (supplied) into the remote. Note Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the projection TV. Tip You can also connect your projection TV to other optional components (see page 30). Step 3 Plug in the power cord, then press! on the projection TV to turn it on. Note The (standby) indicator flashes green for a few seconds when turning on the projection TV. This does not indicate a malfunction. Step 4 Set up the projection TV by following the instructions of the Initial Setup menu (see page 7). End: WEGA GATE 6 Installation

7 Installation x Setting up your projection TV ( Initial Setup ) When you turn on your projection TV for the first time, the Initial Setup menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the convergence using the buttons on the remote control or projection TV front panel. Press V or v to select the desired menu language, then press. The selected menu language appears. anguage: Initial Setup English 2 3 Press V or v to select Yes, then press to preset the channels automatically. The screen will indicate automatic presetting is in progress. After all available channels have been tuned and stored, the Program Sorting/Edit menu appears automatically on the screen. To skip automatic channel presetting, select No, then press. If the message No channel found. Please connect cable/antenna appears, check your projection TV connections, then press. The Program Sorting/Edit menu enables you to sort and edit the channels. a) If you wish to keep the channels in the current condition, press WEGA GATE to exit. b) Press V or v to select the program number with the channel you wish to change. The selected channel will appear on the screen. c) If you wish to store the channels in a different order: ) Press b to enter sorting mode. 2) Press V or v to select the new program number position for your selected channel, then press B. Initial Setup End: WEGA GATE First please connect cable/antenna Start Auto Program now? Yes No End: WEGA GATE Auto Program Program: 0 TV System: Auto VHF ow Program Sorting/Edit POG abel Skip 0 Off Off 05 Off 06 Off Sorting: Edit: Off Off Program Sorting/Edit POG abel Skip 0 Off Off 05 Off 06 Off Sorting mode Off End: WEGA GATE Exit: WEGA GATE Off Exit: WEGA GATE continue Installation 7

8 continued 4 d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: abel, Skip, (block symbol). Then press. ) To label, press V or v to select the alphanumeric characters for the label. Then press. 2) To skip the program number, press V or v to select On. Then press. You can skip this program number when using POG +/. 3) To block unwanted program number, press V or v to select. Then press. e) epeat step b) to d) if you wish to change other channels. Press WEGA GATE to go to the next menu. Make sure that Yes is selected, then press to start digital quick focus. The convergence adjustment screen appears, and the convergence is automatically adjusted. After the adjustment, the last Initial Setup menu appears automatically on the screen. Program Sorting/Edit POG abel Skip 0 Off Off 04 Off 05 Off 06 Off Edit mode Off Program Sorting/Edit POG abel Skip 0 Off Off 04 Off 05 Off 06 Off Edit mode Off Program Sorting/Edit POG abel Skip 0 Off Off 04 Off 05 Off 06 Off Edit mode Off Initial Setup Exit: WEGA GATE Exit: WEGA GATE Exit: WEGA GATE Start digital quick focus now? Yes No Exit: WEGA GATE 5 To prevent this Initial Setup menu from appearing again when you turn on the projection TV by pressing!, press V or v to select No, then press. To allow this menu to appear again, select Yes, then press. Initial Setup Display this menu next time? Yes No Tip You can immediately go to the end of the Initial Setup menu by pressing WEGA GATE. Notes Convergence can also be adjusted manually using the menu (see page 28). You can also perform the Digital Quick Focus feature using on the front panel. Sound will be muted while the Digital Quick Focus feature is running. 8 Installation

9 WEGA GATE POG Overview of Controls Overview of Controls x Projection TV front, inside the dropdown and rear panels Projection TV rear panel C 20W MAX 8 Y Y PB/ CB PB/ CB P/ C P/ C (MONO) Inside the drop-down panel 4 (MONO) WEGA GATE 2 3 Projection TV front panel 2 qs qd qf qg qh qj POG qa Button/Terminal Function Page emote control sensor. 2! Turn off or turn on the projection TV. 6 3 Standby indicator. 6 3 Wake Up indicator. 0 4 POG +/ Select program number / Adjust volume. 6 t Select TV or video input. 30 WEGA GATE menu operations 4, 5 V,v,B,b Select and adjust items. 9 7 Confirm selected items. 9 8 WEGA GATE Display or cancel WEGA GATE menu. 9 9 Adjust convergence automatically t4 Video input terminal qa i Headphone jack. qs t, t2, t3 Video input terminal, 2, qd T Monitor output terminal. 30 qf Component video input terminal. 3 qg 2 Component video input terminal 2. 3 qh Center speaker input terminal. 32 qj 8 Antenna input terminal. 30 Overview of Controls 9

10 x Using the remote control and basic functions qf qg qh qj qk ql w; wa ws WEGA THEATE ETUN VIDEO A/B POG INDEX OPTION TV POG WEGA GATE 0 Overview of Controls qa qs qd Button Description Page?/ Turn off temporarily or turn on the projection TV. 2 a Display the TV program. 3 t Select TV or video input. 30 Stereo/bilingual operations 4 A/B Select stereo/bilingual mode. 6 5 POG INDEX Display all preset TV programs. 5 (KP-F53M96 only) WEGA GATE menu operations 6 V, v, B, b Select and adjust items. 9 7 Confirm selected items. 9 8 WEGA GATE Display or cancel the WEGA 9 GATE. qj ETUN eturn to the previous level. 9 9 Change the picture size: 4:3, 6:9 (6:9 wide-mode). 0 Jump to last program number that has been watched for at least five seconds. qa POG +/ Select program number. Timer operations qs (Sleep Timer) qd (Wake Up Timer) Set projection TV to turn off automatically according to the desired period of time (max. of one hour and 30 min.). Set projection TV to turn on automatically according to the desired period of time (max. of 2 hours). The indicator on projection TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than two hour after the projection TV is turned on using the wake up timer, the projection TV automatically goes into standby mode. qf Mute the sound. qg Display on-screen information. qh WEGA THEATE Select WEGA Theatre Mode. 3

11 Overview of Controls Button Description Page qk Select sound mode options. 2 ql Select picture mode options. 2 w; Select surround mode options. 23 wa 0 9 Input numbers. For program numbers 0 and above, enter the second digit within two seconds. ws 2 +/ Adjust volume. TWIN picture operations (KP-F53M96 only),, V, v, B, b All buttons are used for Twin picture operations. 4 Teletext operations (green label),,,, All buttons are used for Teletext operations. 7,,,, (red, green, yellow, blue) Optional components operations VIDEO?/, OPTION, For details, see Operating optional components. 8 N, X, x,., >,, 2 +/ TruSurround, SS and symbol are trademarks of SS abs, Inc. TruSurround technology is incorporated under license from SS abs, Inc. Overview of Controls

12 Advanced Operations x Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the Custom option. WEGA THEATE VIDEO Selecting the picture mode Press to select the desired picture mode. Select To view A/B POG INDEX Vivid contrast and sharp pictures. Standard normal pictures. ETUN WEGA GATE Custom the last adjusted picture setting from the Picture Adjustment option in the menu (see page 22) Selecting the sound mode Press to select the desired sound mode. Select Dynamic Dynamic To listen to dynamic and clear sound that emphasizes both the low and high tones. Standard sound that emphasizes voice and high tones. Standard Custom Custom the last adjusted sound setting from the Sound Adjustment option in the menu (see page 23). 2 Advanced Operations

13 x Enjoying the WEGA Theatre Mode with center speaker The WEGA Theatre Mode enables you to enjoy the best picture, sound and surround effect of a cinema from a DVD source. You can use your projection TV speaker as the center speaker of your audio system for optimum vocal enhancement and control its sound volume from the remote of the projection TV. Setting up WEGA Theatre Mode WEGA THEATE WEGA THEATE ETUN VIDEO A/B POG INDEX WEGA GATE. Connect the center speaker terminals of the amplifier to the center speaker input terminal on the projection TV (see page 32). 2. Select the proper video input and center speaker mode from WEGA Theatre Setup menu and turn on (main power) the connected equipment (see page 28). 3. See the table below. If the connected equipment is a Sony audio/video equipment, you can set up the remote to work with the connected equipment (see page 8). 2 +/ OPTION TV POG To switch to WEGA Theatre Mode Press adjust center 2 +/. speaker volume WEGA THEATE. Be sure to aim the remote control at the projection TV set and connected equipment for about one second after the button is pressed. The connected equipment turns on automatically from standby mode and will start playing (only for Sony audio/ video equipment). The Picture Mode and Sound Mode will switch automatically to Custom and you can adjust the setting to your personal preference (see pages 22 and 23). Notes Be sure to place your projection TV and connected Sony equipment adjacent to each other so that you can control both the projection TV and the connected equipment by using the projection TV s remote control at the same time (see page 8). The WEGA Theatre and center speaker modes are automatically cancelled when you change the program number, video input or turn the projection TV off and on again. When the projection TV is in the center speaker mode, you cannot use the Twin pictures feature, change the surround sound and the Intelligent Volume mode. Some Sony equipment might not respond properly when WEGA THEATE button is pressed. In this case, use the equipment s own remote control. To use the projection TV s speakers as the center speaker, you can also display Center Speaker from Sound menu and select On (see page 23). Advanced Operations 3

14 x Viewing two programs at the same time 0 8 B KP-F53M96 only With the Twin pictures feature, you can display two different TV program or video input at the same time. VIDEO To Press WEGA THEATE A/B display Twin pictures. To cancel, press the button again. V/v/B/b POG INDEX WEGA ETUN GATE OPTION TV POG select a program number in the right picture swap the left and right pictures swap sound between the left and right pictures change the screen size of the Twin pictures V or v.. B or b once. A symbol will appear to indicate which screen you are hearing. Hold B to increase the left screen size. Hold b to increase the right screen size. Sound will swap automatically to the screen which is increasing in size. Selecting TV program from TV in WEGA GATE menu (see page 9) using PAP (Picture And Picture) You can select your desired TV program directly from the right picture by using V or v buttons.. Press V or v until the desired program appears on the right picture. 2. Press (or b) to display the right picture in full screen. Notes You cannot change the picture size or swap the two pictures in the PAP mode. Swapping the pictures is not available for HD (high-definition) and DVD input signals in Twin mode. HD and DVD input signals are not available in the right picture. The Twin pictures feature is not available when the projection TV is in the center speaker mode (see page 3) and you cannot set the projection TV to the center speaker mode while viewing the Twin pictures. You can only enjoy stereo sound from the left picture. You cannot change the picture to a video input in the right picture. You can only display a video input, except for HD and DVD input signals, in the right picture by swapping the pictures when a video input is displayed in the left picture. The picture and sound from the T (monitor output) terminals will always be from the left picture, even when you select the sound from the right picture by swapping the sound. Due to different video processors used, it is normal that the picture quality of the right picture might be slightly different from the left picture. 4 Advanced Operations

15 x Displaying multiple programs B KP-F53M96 only The Program Index feature displays all tuned TV programs scrolling on the screen for direct selection. POG INDEX V/v/ WEGA THEATE VIDEO A/B POG INDEX Press POG INDEX. The current program is displayed on the left. The first tuned program is displayed on the bottom right of the screen, then frozen. It scrolls up and the next program appears on the bottom-right until all tuned programs appear one by one. WEGA ETUN GATE POG 2 3 Press V or v until the program you want to view is displayed in the frame, then press. To return to scrolling, press V or v again. Press again to enlarge the selected program into the left frame. OPTION TV 4 Press POG INDEX. The selected program is displayed in full screen ,, 0 8, 8 Note When displaying multiple programs, only the sound of the left picture is heard. Advanced Operations 5

16 x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. VIDEO When receiving a NICAM program WEGA THEATE Broadcasting On-screen display (Selected sound) A/B A/B POG INDEX NICAM stereo NICAM (Stereo sound) t t Mono (egular sound) ETUN WEGA GATE NICAM bilingual NICAM Main t NICAM Sub t Mono (Main sound) (Sub sound) (egular sound) t OPTION TV POG NICAM monaural When receiving an A2 program Broadcasting On-screen display (Selected sound) A2 stereo NICAM Main (Main sound) t Stereo (Stereo sound) t t t Mono (egular sound) Mono (egular sound) A2 bilingual Main (Main sound) t Sub (Sub sound) t Note If the stereo sound is noisy when receiving a stereo program, select Mono. The sound becomes monaural but the noise is reduced. 6 Advanced Operations

17 x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. (red, green, yellow, blue), VIDEO WEGA THEATE A/B POG INDEX WEGA ETUN GATE OPTION TV POG To Do this display a Teletext Press. Each time you press, the page on the screen changes as follows: TV picture Teletext t Teletext and TV t TV. If there is no Teletext broadcast, 00 is displayed at the top left corner of the screen. check the contents Press. of a Teletext service An overview of the Teletext contents, including page numbers, appears on the screen. select a Teletext page Press the number buttons to enter the three-digit page number of the desired Teletext page. If you make a mistake, reenter the correct page number. To access the next or previous page, press or. hold (pause) a Press to display the symbol z at Teletext display the top left corner of the screen. To resume normal Teletext viewing, press. reveal concealed Press. information (e.g., To conceal the information, press the an answer to a quiz) button again. enlarge the Teletext Press. Each time you press, the display Teletext display changes as follows: Enlarge upper half t Enlarge lower half t Normal size. stand by for a Teletext () Enter the Teletext page number that page while watching you want to refer to, then press. a TV program (2) When the page number is displayed, press to show the text. select a FASTEXT Press (red, green, yellow and blue) menu or the colored that corresponds to the desired menu or boxes page number. turn off Teletext Press a. Note The FASTEXT feature can be used only when the FASTEXT broadcast is available. Advanced Operations 7

18 x Operating optional components You can use the supplied remote to operate Sony audio/video equipment. Setting up the remote to work with other connected equipment While keeping VIDEO?/ pressed, press the corresponding number button for the desired equipment (see the chart below). For example, to operate a Sony 8 mm VC: VIDEO + 8 To control Audio System, x, 2 or 3 0,, 2 or 3 DVD, 2 or 3 4, 5 or 6 VT (Beta), VT2 (8 mm) or VT3 (VHS) 7, 8 or 9 To Press turn on/off VIDEO?/ play stop fast forward/ step forward or rewind/ step backward Hold down VIDEO?/ and press Operating audio/video equipment Press or while keeping OPTION pressed, press N, x,., >, X, or 2 +/ (see the chart below). pause N while keeping OPTION pressed. x while keeping OPTION pressed. > or. while keeping OPTION pressed. X while keeping OPTION pressed. Press again to resume normal playback. mute the sound while keeping OPTION pressed. (Audio System, x, 2 or 3 only) adjust volume (Audio System, x, 2 or 3 only) 2 +/ while keeping OPTION pressed. Notes If the equipment does not have a certain function, the corresponding button on the remote will not operate. Some equipment might not respond properly to buttons on projection TV s remote. In this case, use the equipment s own remote control. 8 Advanced Operations

19 Menu Adjustment x Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and Settings menu. WEGA GATE TV External Inputs Settings TV TV End: watch the preset TV channels (see pages 7 and 4) External Inputs External Inputs Video 2 Video 2 3 Video 3 4 Video 4 HD/DVD 2 HD/DVD 2 select the inputs for the connected equipment (see page 29) End: Settings Picture DC-MF: DC250 Picture Mode: Vivid Picture Adjustment 3D-N: Off change the settings of your projection TV (see page 20) End: WEGA GATE How to use WEGA GATE WEGA GATE TV External Inputs Settings TV End: () Press WEGA GATE to display or cancel the WEGA GATE menu. (3) Press V or v to select the desired item. TV End: WEGA GATE TV External Inputs Settings (2) Press (or b) to confirm your selection or go to the next level. (4) Press ETUN to move to the previous level. Tip The WEGA GATE, operations above. and V,v,B,b buttons on the front panel can also be used for the Menu Adjustment 9

20 x Settings Adjustment You are able to change the settings of your projection TV from Settings in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select Settings and press. The following is an overview of the items that can be adjusted. Picture DC-MF: DC250 Picture Mode: Vivid Picture Adjustment 3D-N: Off End: WEGA GATE Picture (see page 22) DC-MF : DC250 DC00 Progressive Picture Mode : Vivid Standard Custom Picture Adjustment : Picture, Brightness, Color, Hue, Sharpness, Color Temperature, eset 3D-N : On Off Sound Sound Mode: Dynamic Sound Adjustment Balance 00 Intelligent Volume: Off Surround: Off Center Speaker: Off End: WEGA GATE Sound (see page 23) Sound Mode : Dynamic Standard Custom Sound Adjustment : Treble, Bass, BBE *, eset Balance Intelligent Volume : On Off Surround : TruSurround Simulated Off Center Speaker : On Off Wide Screen Wide Mode: Auto Wide: 4:3 Off Wide Screen (see page 24) Wide Mode : 6:9 4:3 Auto Wide : On Off End: WEGA GATE Multi Picture Twin: Off Swap Program Index Multi Picture (KP-F53M96 only) (see page 25) Twin : On Off Swap Program Index End: WEGA GATE 20 Menu Adjustment

21 Channel Setup Auto Program Manual Program TV System: B/G Program Sorting/Edit End: WEGA GATE Channel Setup (see page 26) Auto Program Manual Program Program : TV System : B/G I D/K M VHF ow / VHF High / UHF Fine : Auto Manual Signal Booster : Auto Off Sensitivity : High ow TV System : B/G I D/K M Program Sorting/Edit Setup anguage: English Convergence WEGA Theatre Setup Game Mode: Off Video abel Color System: Auto Eco Mode: Off End: WEGA GATE Setup (see page 28) anguage : English (Chinese) (Arabic) (Thai) Convergence : Digital Quick Focus, Manual Adjust WEGA Theatre Setup : Direct Input, Speaker Game Mode : On Off Video abel : Video Input, abel Color System : Auto PA SECAM NTSC3.58 NTSC4.43 Eco Mode : On Off S input : Auto Off Factory Settings : Yes No Note When a feature is dimmed in the menu, it is not selectable. * icensed by BBE Sound, Inc. under USP , BBE and BBE symbol are trademarks of BBE Sound, Inc. Menu Adjustment 2

22 x Changing the Picture setting 2 The Picture menu allows you to adjust the picture settings. Press WEGA GATE and select Settings. Make sure the Picture icon ( ) is selected, then press. Picture DC-MF: DC250 Picture Mode: Vivid Picture Adjustment 3D-N: Off 3 Press V or v to select the desired item (e.g., DC-MF ), then press. Select DC-MF To choose either DC250 (for high density pictures), DC00 (reduce flicker on the screen) or Progressive (reduce jitter of any small areas or scanning lines on the screen). Picture Mode choose either Vivid, Standard or Custom * (see page 2). 3D-N End: WEGA GATE improve the picture quality of TV or video if a signal received is weak. Press V or v to select On, then press. To cancel, select Off, then press. * You can adjust the setting to your personal preference in the Picture Adjustment option only when the Custom mode is selected. Adjusting the Picture Adjustment items under Custom mode 2 3 Press V or v to select either Picture (contrast), Brightness, Color, Hue (color tones), Sharpness or Color Temperature (choose either Cool, Neutral or Warm ), then press. Selecting eset will set your projection TV to the factory settings. Press V,v,B or b to adjust the setting of your selected item, then press. epeat the above steps to adjust other items. The adjusted settings will be received when you select Custom. Notes The DC-MF mode is not selectable when using the Program Index feature or when the Game Mode or Twin mode is turned On. The mode is not available for HD (highdefinition) and progressive input signals. Hue can be adjusted for the NTSC color system only. educing Sharpness can also reduce picture noise. The DC-MF logo ( Corporation. 22 Menu Adjustment ) and DC-MF are trademarks of Sony

23 x Changing the Sound setting 2 The Sound menu allows you to adjust the sound settings. Press WEGA GATE and select Settings. Press V or v to select the Sound icon ( ), then press. Sound DC-MF: Sound Mode: Dynamic Sound Adjustment Balance Intelligent Volume: Off Surround: Off Center Speaker: Off 00 3 Press V or v to select the desired item (e.g., Sound Mode ), then press. Select Sound Mode Balance Intelligent Volume To choose either Dynamic, Standard or Custom * (see page 2). Press v or B to emphasize the left speaker. Press V or b to emphasize the right speaker. End: WEGA GATE adjust the volume of all program numbers and video inputs automatically. Press V or v to select On, then press. To cancel, select Off, then press. Surround Center Speaker choose either TruSurround (surround sound that spreads out to the rear of a room), Simulated (stereo-like monaural sound) or Off. use your projection TV speaker to optimise vocal enhancement. Press V or v to select On, then press. To cancel, select Off, then press. * You can adjust the setting to your personal preference in the Sound Adjustment option only when the Custom mode is selected. Adjusting the Sound Adjustment item under Custom mode 2 3 Press V or v to select either Treble, Bass or BBE (choose either High, ow or Off ), then press. Selecting eset will set your projection TV to the factory settings. Press V, v, B or b to adjust the setting of your selected item, then press. epeat the above steps to adjust other items. The adjusted settings will be received when you select Custom. Menu Adjustment 23

24 x Changing the Wide Screen setting 2 The Wide Screen menu allows you to view the picture with optimal effect when receiving wide-mode (6:9) picture signal. Press WEGA GATE and select Settings. Press V or v to select the Wide Screen icon ( ), then press. Wide Screen Wide Mode: 4:3 Auto Wide: Off 3 Press V or v to select the desired item (e.g., Wide Mode ), then press. Select To Wide Mode change the size of the picture when receiving wide-mode (6:9) picture signal. Choose 6:9. To restore the normal picture size, select 4:3, then press. End: WEGA GATE Auto Wide display the picture in optimum wide screen automatically when you choose On. To cancel, select Off, then press. Tip You can also change to wide-mode picture size by pressing the control (see page 0). button on the remote Notes Wide Mode is not selectable for HD (080i, 720p) input signals or in the right screen when viewing twin pictures. For HD (080i, 720p) input signals, your projection TV will always display wide mode picture. Auto Wide is only available when receiving 576i, 480p and 480i input signals. 24 Menu Adjustment

25 x Changing the Multi Picture setting 2 B KP-F53M96 only The Multi Picture menu allows you to view two pictures on the screen at the same time, swap the picture of twin screen and display Program Index. Press WEGA GATE and select Settings. Press V or v to select the Multi Picture icon ( ), then press. Multi Picture Twin: Off Swap Program Index 3 Press V or v to select the desired item (e.g., Twin ), then press. Select Twin To display a different TV program beside the main picture. Press V or v to select On, then press. To cancel, select Off, then press. End: WEGA GATE Swap Program Index swap the left and right pictures of the twin screen. view multiple programs on the sub-screens. To cancel, select Program Index, then press. Tip You can also display or cancel the settings directly by pressing the, or POG INDEX buttons on the remote control (see pages 4 and 5). Menu Adjustment 25

26 x Changing the Channel Setup setting 2 The Channel Setup menu allows you to preset channels automatically, manually preset channels, select the TV system and sort or edit the channels. Press WEGA GATE and select Settings. Press V or v to select the Channel Setup icon ( ), then press. Channel Setup Auto DC-MF: Program Manual Program TV System: B/G Program Sorting/Edit 3 Press V or v to select the desired item (e.g., Auto Program ), then press. Select Auto Program Manual Program TV System To preset channels automatically. End: WEGA GATE manually preset desired channels and channels that cannot be preset automatically (see Presetting channels manually in page 27). select the TV system. Press V or v to select either B/G, I, D/K or M, then press. Program Sorting/Edit change the order in which the channels appear on the screen, label the program number, skip the program number and block unwanted programs. (see step 3 of the section Initial Setup in page 7). Notes If you preset a blocked program number, that program number will be unblocked automatically. If you sort a blocked program, that program will remain blocked. 26 Menu Adjustment

27 Presetting channels manually After selecting Manual Program, select the program number to which you want to preset a channel. () Make sure Program is selected, then press. (2) Press V or v until the program number you want to preset appears on the menu, then press. Manual Program Program: TV System: VHF ow Fine: Signal Booster: Sensitivity: 0 B/G Auto Auto High End: WEGA GATE Select the desired channel. () Make sure either VHF ow, VHF High or UHF is selected, then press. (2) Press V or v until the desired channel s broadcast appears on the projection TV screen, then press. If the sound of the desired channel is abnormal, select the appropriate TV system. () Press V or v to select TV System, then press. (2) Press V or v until the sound becomes normal, then press. If you are not satisfied with the picture and sound quality, you may be able to improve them by using the Fine tuning feature. () Press V or v to select Fine, then press. (2) Press V or v to select Manual, then press. (3) Press V,v,B or b until the picture and sound quality are optimal, then press. The + or icon on the menu flashes while tuning. If the TV signal is too weak (snowy picture), you may be able to improve the picture quality by setting the Signal Booster feature. () Press V or v to select Signal Booster, then press. (2) Make sure Auto is selected, then press. If the TV signal is too strong (picture distorted; picture with lines; signal interference), select Off, press and go to next step to adjust the Sensitivity. If the TV signal is too strong (picture distorted; picture with lines; signal interference), you may be able to adjust the TV reception sensitivity by setting the Sensitivity feature. () Press V or v to select Sensitivity, then press. (2) Press V or v to select ow, then press. Note Sensitivity is only selectable when Signal Booster is set to Off. Menu Adjustment 27

28 x Changing the Setup setting 2 3 The Setup menu allows you to change the menu language, adjust the convergence, setup WEGA Theatre Mode, adjust suitable picture setting for video games, label the connected equipment, select the color system, reduce your projection TV power consumption, select the S video input mode and reset your projection TV to factory settings. Press WEGA GATE and select Settings. Press V or v to select the Setup icon ( ), then press. Press V or v to select the desired item (e.g., anguage ), then press. Select anguage Convergence To Setup anguage: English Convergence Wega Theatre Setup Game Mode: Off Video abel Color System: Auto Eco Mode: Off End: WEGA GATE change the menu language. Press V or v to select either English, (Chinese), (Arabic) or (Thai), then press. adjust the convergence. Press V or v to select Digital Quick Focus or Manual Adjust, then press. When you select Digital Quick Focus, convergence is automatically adjusted. When you select Manual Adjust, the cross pattern appears on the screen. () Press V,v,B or b to adjust the red lines until they converge with the green lines, then press. (2) Press V,v,B or b to adjust the blue lines until they converge with the center cross pattern, then press. WEGA Theatre Setup Game Mode setup WEGA Theatre Mode for best picture, sound and surround effect enjoyment of a cinema (see page 3). Press V or v to select Direct Input, then press. Select either Video, Video 2, Video 3, Video 4, HD/DVD or HD/DVD 2 for the connected equipment that you want to view with WEGA Theatre, then press. Select Speaker and press. Normally select MAIN. When you want to use the projection TV s speakers as the center speaker, press V or v to select CENTE IN, then press. adjust the picture setting that is suitable to view video games. Press V or v to select On, then press. To cancel, select Off, then press. 28 Menu Adjustment

29 Video abel Color System Eco Mode label the connected equipment. () Press V or v to select the input you want to label, then press. (2) Press V or v to select the label options: Video / Video 2 / Video 3 / Video 4 / HD/DVD / HD/DVD 2, VC, SAT, Game or Edit *, then press. * You may edit the video label to your favorite name. Press V or v to select alphanumeric characters for the label, then press. select the color system. Press V or v to select either Auto, PA, SECAM, NTSC3.58 or NTSC4.43, then press. Normally, set this to Auto. reduce power consumption of your projection TV to save energy. Press V or v to select On, then press. When you press or turn on the projection TV, Eco Mode ( ) symbol will appear on the screen for a while. To cancel, select Off, then press. S Input select the S video input mode. Press V or v to select Auto to receive the S video signal automatically when the signals are input through both the (S video input) and (video input) jacks of the same video input channel, then press. Factory Settings To cancel, select Off, then press. reset your projection TV to factory settings. Press and press V or v to select Yes, then press. To cancel, select No, then press. Tip When the Digital Quick Focus feature is performed, manual adjustment values are erased. Notes Adjust convergence about minutes after the projection TV is first turned on. Game Mode is available only when receiving signals through the t (video input), (S video input) or (component video input) terminals. When HD (high-definition) or progressive signals are input, Game Mode does not function. Menu Adjustment 29

30 Additional Information x Connecting optional components Connecting to the video input terminal ( t ) Projection TV drop-down panel 4 (MONO) S Video cable (not supplied) Audio/Video cable (not supplied) Camcorder Projection TV rear panel C 20W MAX 8 Antenna cable (not supplied) Y Y PB/ CB PB/ CB (MONO) P/ C P/ C S Video cable (not supplied) VC Audio/Video cable (not supplied) DVD Player Notes If you connect a VC to 8 (antenna input), preset the signal output from the VC to the program number 0 on the projection TV (see page 27). When both (S video) and (video) for t or t4 are connected at the same time, (S video) is automatically selected. To view (video), disconnect the S video cable. Connecting to the monitor output terminal ( T ) Projection TV rear panel C 20W MAX 8 (MONO) Y PB/ CB P/ C Y PB/ CB P/ C Audio/Video cable (not supplied) Audio system VC 30 Additional Information

31 Connecting to the component video input terminal ( ) Projection TV rear panel C Y 20W MAX 8 Y Component video cable (not supplied) PB/ CB PB/ CB (MONO) 2 3 P/ C P/ C 2 Audio cable (not supplied) DVD player Notes The component video terminals on your DVD player are sometimes labeled Y/CB/C, Y/PB/ P, Y/Cb/Cr or Y/B-Y/-Y. If you select HD/DVD or HD/DVD 2 on your projection TV screen, the signal from the T (monitor output) terminals will not be output properly. This does not indicate a malfunction. Projection TV rear panel C 20W MAX 8 Y PB/ CB Y PB/ CB Component video cable (not supplied) (MONO) P/ C P/ C Audio cable (not supplied) Digital TV receiver Note If your DTV receiver is equipped with the Y/PB/P output terminals, connect it to the Y/PB/P terminals of (component video input ) or 2 (component video input 2). Tip The TV accepts the following signal formats: Total scanning line Effective scanning line fv (Hz) 25i 080i 50/60 750p 720p 50/60 625p 576p i 576i p 480p i 480i 60 continue Additional Information 3

32 continued Connecting an amplifier to the center speaker input terminal ( ) If you use an amplifier with a Dolby* surround decoder instead of the projection TV s audio system, you can use the projection TV s speakers as the center speaker for your audio system. Using the speaker cords supplied with the amplifier, connect the center speaker terminals of the amplifier to the (center speaker input) terminals on the projection TV. DVD player Projection TV rear panel C Y PB/ CB 20W MAX 8 Y PB/ CB Component video cable (not supplied) Optical digital cable (not supplied) (MONO) C P/ C P/ C Amplifier 2 20W 3 2 Audio cable (not supplied) Front speaker () ear speaker () Front speaker () ear speaker () Woofer Note If you use the projection TV s speaker as the center speaker and nothing is connected to the center speaker input terminals on the rear of projection TV or the sound source emitted from the amplifier does not contain the center speaker channel, no sound will be heard from the projection TV s speaker. * Dolby is a trademark of Dolby aboratories. 32 Additional Information

33 x Troubleshooting If you find any problem while viewing your projection TV, you can either use the Factory Settings function or check the Troubleshooting guide below. If the problem persists, contact your Sony dealer. Factory Settings function Press the WEGA GATE button. Choose Settings and go to Setup ( ) menu. From Setup menu, select Factory Settings. Then select Yes and press. Your projection TV will go blank for a few seconds, then the Initial Setup menu will appear. Your projection TV will be set to factory settings, but certain problems may be solved. Symptom Solutions Snowy picture, noisy sound Check the antenna cable and connection on the projection TV, VC and at the wall (see page 30). Check the antenna setup. Contact a Sony dealer for advice. Display the Channel Setup menu and select Manual Program to preset the channel again (see page 27). Display the Channel Setup menu and set the Signal Booster to Auto from Manual Program (see page 27). Try using an external booster. Distorted picture, noisy sound Good picture, noisy sound No picture, no sound Good picture, no sound Dotted lines or stripes Double images or ghosts No color Turn off or disconnect the external booster if it is in use. Display the Channel Setup menu and set the Sensitivity to ow from Manual Program (see page 27). Display the Channel Setup menu and select the appropriate TV System from Manual Program (see page 27). The sound of the right picture is selected when twin pictures are displayed. Press or B, b once (KP-F53M96 only) (see page 4). Check the power cord, antenna and VC connections (see page 30). Press?/ (power) to turn on the projection TV (see page 0). Press! (main power) on the projection TV to turn off the projection TV for about five seconds, then turn it on again (see page 9). Press 2 + to increase the volume level (see page 9). Press to cancel the muting (see page 0). The sound of the right picture is selected when twin pictures are displayed. Press or B, b once (KP-F53M96 only) (see page 4). Do not use a hair dryer or other equipment near the projection TV. Check the antenna setup. Contact a Sony dealer for advice. Use the fine tuning ( Fine ) function (see page 27). Check the antenna setup. Contact a Sony dealer for advice. Turn off or disconnect the external booster if it is in use. Display the Picture menu and select Custom of Picture Mode, then adjust the Color level in Picture Adjustment (see page 22). Display the Setup menu and check the Color System setting (usually set this to Auto ) (see page 29). Check the antenna setup. Contact a Sony dealer for advice. continue Additional Information 33

34 continued Symptom Abnormal color patches TV cannot receive stereo broadcast sound. or Stereo broadcast sound switches on and off or is distorted. Teletext display is incomplete (snowy picture or double images). The (standby) indicator on your projection TV flashes red several times after every three seconds. The projection TV screen sometimes goes blank for slightly longer than usual during channel change. Cannot play shooting games. Projection TV cabinet creaks. Solutions Keep external speakers or other equipment away from the projection TV. Do not move the projection TV while the projection TV is turned on. Check the antenna cable and connection on the projection TV, VC and at the wall (see page 30). Check the antenna setup. Contact a Sony dealer for advice. Check the antenna cable and connection on the projection TV, VC and at the wall (see page 30). Check the antenna setup. Contact a Sony dealer for advice. Display the Channel Setup menu and set the Signal Booster to Auto from Manual Program (see page 27). Use the fine tuning ( Fine ) function (see page 27). Count the number of times the (standby) indicator flashes. Press! (main power) to turn off your projection TV. Contact your nearest Sony service center. The Signal Booster is functioning to detect a weak signal. This does not indicate a malfunction. Some shooting games which involve pointing a light beam at the projection TV screen with an electronic gun or rifle cannot be used with your projection TV. For details, see the instruction manual supplied with the video game software. Change in room temperature sometimes make the projection TV cabinet expand or contract, causing a noise. This does not indicate a malfunction. Static discharge is felt when touching the projection TV cabinet. ines moving across the projection TV screen. This is the same static discharge that is felt when touching metal door handles or car doors especially when the air is dry, for example in winter. This does not indicate a malfunction. Use the fine tuning ( Fine ) function (see page 27). 34 Additional Information

35 2

36 AVETISSEMENT Afin d éviter tout risque d incendie ou d électrocution, n exposez pas le téléviseur de projection à la pluie ou à l humidité. Ce téléviseur de projection fonctionne avec des hautes tensions dangereuses. N ouvrez jamais le châssis de l appareil. Confiez l entretien à un personnel qualifié uniquement. Sécurité: N exposez pas le téléviseur de projection à la pluie ou à l humidité. N ouvrez pas le panneau arrière. Installation: Veillez à ne pas obstruer les orifices de ventilation. N installez pas le téléviseur de projection dans un endroit chaud, humide ou excessivement poussiéreux. N installez pas le téléviseur de projection dans un endroit où il risque d être soumis à des vibrations mécaniques. Evitez de faire fonctionner le téléviseur de projection à des températures inférieures à 5 C. Si vous transportez le téléviseur de projection d un endroit froid à un endroit chaud, ou si la température de la pièce change subitement, l image peut être imprécise ou présenter des couleurs peu nettes. Ceci est dû à la condensation sur le miroir ou l objectif. Si cela se produit, laissez s évaporer la condensation avant d utiliser le téléviseur de projection. Pour obtenir une meilleure image, n exposez pas l écran à la lumière directe et aux rayons du soleil. Il est recommandé d utiliser un projecteur d éclairage au plafond ou de couvrir les fenêtres faisant face à l écran avec des rideaux opaques. Il est également préférable d installer le téléviseur de projection dans un local où le sol et les murs ne sont pas revêtus d un matériau réfléchissant. Si nécessaire, utilisez un tapis foncé ou tapissez la pièce. N installez pas l appareil dans un espace confiné comme dans une bibliothèque ou un meuble encastré. Utilisation: Faites uniquement fonctionner le téléviseur de projection sur une tension de V CA 50/60 Hz. Ne faites pas fonctionner le téléviseur de projection si un liquide ou un objet est tombé à l intérieur et faites-le vérifier immédiatement. Ne laissez pas le téléviseur de projection branché sur le secteur si vous prévoyez de ne pas l utiliser pendant plusieurs jours. Même si votre téléviseur de projection est hors tension, il reste raccordé à la source d alimentation secteur tant que le cordon d alimentation est branché. Ne tirez pas sur le cordon d alimentation pour débrancher le téléviseur de projection, mais tirez sur la fiche. Ne branchez pas un nombre trop important d appareils sur la même prise. N endommagez pas le cordon d alimentation. Ne placez aucun objet sur le téléviseur de projection. Cet appareil ne doit pas être exposé à des gouttes d eau ou à des éclaboussures et aucun objet contenant du liquide, comme un vase, ne doit être placé dessus. Installez le téléviseur de projection sur un support et un sol stables en mesure de supporter son poids. Vérifiez que la surface du support est plane et qu elle est plus grande que le socle du téléviseur de projection. Ne transportez pas le téléviseur de projection en le prenant par les bords de l écran. Attention orsque vous utilisez des jeux vidéo, des ordinateurs et d autres produits similaires avec votre téléviseur de projection, maintenez les réglages de luminosité et de contraste sur de faibles valeurs. Si une image fixe (non animée) reste affichée à l écran pendant de longues périodes alors que la luminosité et le contraste sont réglés sur des valeurs élevées, l image peut rester définitivement incrustée sur l écran. Ces types d incrustations ne sont pas couverts par notre garantie car ils résultent d une utilisation inappropriée. Nettoyage de l écran Pour nettoyer l écran avec un chiffon, utilisez le chiffon de nettoyage légèrement imprégné d eau. N utilisez pas d éponge abrasive, de nettoyant alcalin, de poudre à récurer ou de solvant tel que de l alcool ou de la benzine. Par mesure de sécurité, débranchez le téléviseur avant de le nettoyer. Ne frottez pas, ne touchez pas et ne tapotez pas la surface de l écran avec des objets pointus ou abrasifs, tels que la pointe d un stylo ou un tournevis. Vous pourriez en effet rayer l écran. 3

37 WEGA GATE WEGA GATE POG POG WEGA GATE WEGA GATE POG POG Utilisation de votre nouveau téléviseur de projection x Installation du téléviseur de projection Pour obtenir une image de qualité optimale, installez le téléviseur de projection en respectant le schéma illustré ci-dessous. Zone de visualisation optimale (horizontale) KP-F43 KP-F53 min..9 m min..7 (6 ft.) (5.6 ft.) min. 2.4 m (8 ft.) Zone de visualisation optimale (verticale) KP-F43 KP-F53 min..9 m (6 ft.) min. 2.4 m (8 ft.) Utilisation de votre nouveau téléviseur de projection

KV-BZ212M50

KV-BZ212M50 -68-385- () Trinitron Color TV Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Panduan Pengendalian Sebelum mengendalikan unit,

More information

KV-AZ212M61

KV-AZ212M61 -685-750- () Trinitron Color TV Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Panduan Pengendalian Sebelum mengendalikan unit,

More information

KV-DA322M66

KV-DA322M66 2-638-77- () Trinitron Color TV Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. GB CT Panduan Pengendalian Sebelum mengendalikan

More information

TX-NR3030_BAS_Cs_ indd

TX-NR3030_BAS_Cs_ indd TX-NR3030 http://www.onkyo.com/manual/txnr3030/adv/cs.html Cs 1 2 3 Speaker Cable 2 HDMI OUT HDMI IN HDMI OUT HDMI OUT HDMI OUT HDMI OUT 1 DIGITAL OPTICAL OUT AUDIO OUT TV 3 1 5 4 6 1 2 3 3 2 2 4 3 2 5

More information

01CP-WX3030WNetc_CO_ENG.indd

01CP-WX3030WNetc_CO_ENG.indd Data Video Projector User s Manual (Concise) ModelS: 8928A/8930A/8931WA/ 8933W Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please

More information

KV-HS38/HS34/HS29M90

KV-HS38/HS34/HS29M90 4-090-175-13 (1) Trinitron KV-HS38 KV-HS34 KV-HS29 2002 Sony Corporation M90 2 3 4 6 6 7 8 9 11 16 19 20 21 24 26 27 29 32 42 45 48 50 51 52 59 62 63 5 6 7 t 8 VIDEO IN VIDEO OUT AUDIO VIDEO R L (MONO)

More information

K301Q-D VRT中英文说明书141009

K301Q-D VRT中英文说明书141009 THE INSTALLING INSTRUCTION FOR CONCEALED TANK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall

More information

Microsoft Word - template.doc

Microsoft Word - template.doc HGC efax Service User Guide I. Getting Started Page 1 II. Fax Forward Page 2 4 III. Web Viewing Page 5 7 IV. General Management Page 8 12 V. Help Desk Page 13 VI. Logout Page 13 Page 0 I. Getting Started

More information

Logitech Wireless Combo MK45 English

Logitech Wireless Combo MK45 English Logitech Wireless Combo MK45 Setup Guide Logitech Wireless Combo MK45 English................................................................................... 7..........................................

More information

<4D6963726F736F667420576F7264202D2032303130C4EAC0EDB9A4C0E04142BCB6D4C4B6C1C5D0B6CFC0FDCCE2BEABD1A15F325F2E646F63>

<4D6963726F736F667420576F7264202D2032303130C4EAC0EDB9A4C0E04142BCB6D4C4B6C1C5D0B6CFC0FDCCE2BEABD1A15F325F2E646F63> 2010 年 理 工 类 AB 级 阅 读 判 断 例 题 精 选 (2) Computer mouse How does the mouse work? We have to start at the bottom, so think upside down for now. It all starts with mouse ball. As the mouse ball in the bottom

More information

1.ai

1.ai HDMI camera ARTRAY CO,. LTD Introduction Thank you for purchasing the ARTCAM HDMI camera series. This manual shows the direction how to use the viewer software. Please refer other instructions or contact

More information

1 2 3 Speaker Cable 2

1 2 3 Speaker Cable   2 TX-NR636 AV RECEIVER http://www.onkyo.com/manual/txnr636upg/adv/ct.html Ct 1 2 3 Speaker Cable http://www.onkyo.com/manual/txnr636upg/adv/ct.html 2 HDMI OUT HDMI IN HDMI OUT HDMI OUT HDMI OUT HDMI OUT

More information

CANVIO_AEROCAST_CS_EN.indd

CANVIO_AEROCAST_CS_EN.indd 简 体 中 文...2 English...4 SC5151-A0 简 体 中 文 步 骤 2: 了 解 您 的 CANVIO AeroCast CANVIO AeroCast 无 线 移 动 硬 盘 快 速 入 门 指 南 欢 迎 并 感 谢 您 选 择 TOSHIBA 产 品 有 关 您 的 TOSHIBA 产 品 的 详 情, 请 参 阅 包 含 更 多 信 息 的 用 户 手 册 () 安

More information

Windows XP

Windows XP Windows XP What is Windows XP Windows is an Operating System An Operating System is the program that controls the hardware of your computer, and gives you an interface that allows you and other programs

More information

KV-HZ34/29 M80

KV-HZ34/29 M80 4-098-738-13 (1) Trinitron Color TV KV-HZ34 KV-HZ29 2003 Sony Corporation M80 2 3 4 6 6 7 8 9 11 17 20 21 22 23 26 27 31 34 37 49 52 53 57 5 1 (3) (1) (2) 2 (1) (2) 6 8 7 t 8 AUDIO VIDEO Y 2 Y G PB/ CB

More information

S325A 2

S325A 2 TX-NR609 S325A 2 ON/STANDBY ON/STANDBY POWER POWER ON/STANDBY POWER 3 2 2 3 3 * 4 VCR/DVR ON/STANDBY 69 5 * *2 *3*4 -*5 *5 *6 *7 *6 *6 *6 *8 *9 * *0 *9 6 * *2 *3 *4 *5 *6 *7 *8 *9 *0 *0 7 ON/STANDBY 22

More information

KDC-U5049 KDC-U4049 Made for ipod, and Made for iphone mean that an electronic accessory has been designed to connect specifically to ipod, or iphone,

KDC-U5049 KDC-U4049 Made for ipod, and Made for iphone mean that an electronic accessory has been designed to connect specifically to ipod, or iphone, KDC-U5049 KDC-U4049 Made for ipod, and Made for iphone mean that an electronic accessory has been designed to connect specifically to ipod, or iphone, respectively, and has been certified by the developer

More information

2_dvdr3380_97_CT_21221b.indd

2_dvdr3380_97_CT_21221b.indd 64 65 66 ALL 3 67 a STANDBY-ON 2 a b c d e f g h i j k l b TIMER c SYSTEM-MENU d e SELECT f REC g. > h TOP MENU i ANGLE j RETURN k SUBTITLE l REC MODE 68 m n REC SOURCE o DISC-MENU p OK q EDIT r PLAYÉ

More information

WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR S3125A Ct-2

WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR S3125A Ct-2 DR-UN7 Ct WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR S3125A...... Ct-2 1 Ct-3 Ct-4 Ct-5 ...2...3...5...5...6...8...10...10...10...11...11...12...13...14...16...18...18...18...19...19

More information

BC04 Module_antenna__ doc

BC04 Module_antenna__ doc http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 1 of 10 http://www.infobluetooth.com TEL:+86-23-68798999 Fax: +86-23-68889515 Page 2 of 10 http://www.infobluetooth.com TEL:+86-23-68798999

More information

pdf

pdf THE INSTLLING INSTRUCTION FOR CONCELED TNK Important instuction:.. Please confirm the structure and shape before installing the toilet bowl. Meanwhile measure the exact size H between outfall and infall

More information

AL-M200 Series

AL-M200 Series NPD4754-00 TC ( ) Windows 7 1. [Start ( )] [Control Panel ()] [Network and Internet ( )] 2. [Network and Sharing Center ( )] 3. [Change adapter settings ( )] 4. 3 Windows XP 1. [Start ( )] [Control Panel

More information

User’s Manual

User’s Manual SNAP 500 打 印 机 用 户 手 册 1 用 户 手 册 SNAP TM 500 打 印 机 2015 年 8 月 24 日 AVERY DENNISON Manual Edition 2.5 2 SNAP 500 打 印 机 用 户 手 册 WARNING This device complies with Part 15 of the FCC Rules. Operation is subject

More information

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DV-SP302 Ct WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE

More information

2015 Chinese FL Written examination

2015 Chinese FL Written examination Victorian Certificate of Education 2015 SUPERVISOR TO ATTACH PROCESSING LABEL HERE Letter STUDENT NUMBER CHINESE FIRST LANGUAGE Written examination Monday 16 November 2015 Reading time: 11.45 am to 12.00

More information

Microsoft PowerPoint - AWOL - Acrobat Windows Outlook.ppt [Compatibility Mode]

Microsoft PowerPoint - AWOL - Acrobat Windows Outlook.ppt [Compatibility Mode] AWOL Windows - Tips & Tricks Resolution, color depth & refresh rate Background color Service packs Disk cleanup (cleanmgr) Disk defragmentation AWOL Windows Resolution, Color Depth & Refresh Rate The main

More information

Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies to all d

Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies to all d WeChat Search Visual Identity Guidelines WEDESIGN 2018. 04 Preface This guide is intended to standardize the use of the WeChat brand and ensure the brand's integrity and consistency. The guide applies

More information

入學考試網上報名指南

入學考試網上報名指南 入 學 考 試 網 上 報 名 指 南 On-line Application Guide for Admission Examination 16/01/2015 University of Macau Table of Contents Table of Contents... 1 A. 新 申 請 網 上 登 記 帳 戶 /Register for New Account... 2 B. 填

More information

OA-253_H1~H4_OL.ai

OA-253_H1~H4_OL.ai WARNINGS Note: Read ALL the following BEFORE using this product. Follow all Guidelines at all times while using this product. CAUTION This warning indicates possibility of personal injury and material

More information

UTI (Urinary Tract Infection) - Traditional Chinese

UTI (Urinary Tract Infection) - Traditional Chinese UTI (Urinary Tract Infection) Urinary tract infection, also called UTI, is an infection of the bladder or kidneys. Urethra Kidney Ureters Bladder Vagina Kidney Ureters Bladder Urethra Penis Causes UTI

More information

K7VT2_QIG_v3

K7VT2_QIG_v3 ............ 1 2 3 4 5 [R] : Enter Raid setup utility 6 Press[A]keytocreateRAID RAID Type: JBOD RAID 0 RAID 1: 2 7 RAID 0 Auto Create Manual Create: 2 RAID 0 Block Size: 16K 32K

More information

WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PORTABLE CART WARNING S325A CT-2

WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PORTABLE CART WARNING S325A CT-2 FR-N3X WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PORTABLE CART WARNING S325A CT-2 CT-3 CLASS LASER PRODUCT CT-4 CT-5 6 mm mm 3 mm 6 5mm 2 CT-6 2 CT-7 2 3 0mm

More information

Important Notice SUNPLUS TECHNOLOGY CO. reserves the right to change this documentation without prior notice. Information provided by SUNPLUS TECHNOLO

Important Notice SUNPLUS TECHNOLOGY CO. reserves the right to change this documentation without prior notice. Information provided by SUNPLUS TECHNOLO Car DVD New GUI IR Flow User Manual V0.1 Jan 25, 2008 19, Innovation First Road Science Park Hsin-Chu Taiwan 300 R.O.C. Tel: 886-3-578-6005 Fax: 886-3-578-4418 Web: www.sunplus.com Important Notice SUNPLUS

More information

5in1_eDVR_Manual_Chinese.cdr

5in1_eDVR_Manual_Chinese.cdr 02 English User Manual 29 User Manual Contents 2 5 6 7 8 9 10 11 12 14 17 18 19 20 21 22 23 24 25 26 27 Quick start Controls Accessories Minimum System Requirements Battery Charge Power On/Off LCM Indicator

More information

RX-5042S[UT]

RX-5042S[UT] TA/NEWS/INFO DISPLAY MODE AUDIO/VIDEO CONTROL RECEIVER RX-5042S INSTRUCTIONS LVT1140-006A [UT] STANDBY/ON STANDBY/ON RX-5042S G-1 ... 2... 4... 4... 4... 4 FM AM... 4... 5... 6 7... 6 7... 8... 8... 8...

More information

2004cm

2004cm 重要注意事項 視窗系統所在的硬碟分割區 ( 一般常使用 C:\ 硬碟分割區 ), 建議最少要有 20 GB 的可使用空間, 且該硬碟分割區內只限於安裝視窗系統及 DVR 主機程式 錄影紀錄的儲存位置, 應該避免使用視窗系統所在的硬碟分割區, 而是在其他的硬碟分割區內 這樣的配置方式能保持視窗系統及 DVR 主機程式的執行效能及長期穩定性 2400 1 2 2404S H1004S - - - 2416SG

More information

Microsoft Word - HC20138_2010.doc

Microsoft Word - HC20138_2010.doc Page: 1 of 7 Date: April 26, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

2017 CCAFL Chinese in Context

2017 CCAFL Chinese in Context Student/Registration Number Centre Number 2017 PUBLIC EXAMINATION Chinese in Context Reading Time: 10 minutes Working Time: 2 hours and 30 minutes You have 10 minutes to read all the papers and to familiarise

More information

穨control.PDF

穨control.PDF TCP congestion control yhmiu Outline Congestion control algorithms Purpose of RFC2581 Purpose of RFC2582 TCP SS-DR 1998 TCP Extensions RFC1072 1988 SACK RFC2018 1996 FACK 1996 Rate-Halving 1997 OldTahoe

More information

V39用户手册0227.doc

V39用户手册0227.doc 300 2004 (FCC) FCC I/O B Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilieur du Canada. Windows Windows 98 Windows 2000 Windows ME Windows XP Microsoft

More information

Microsoft Word - 3. Vitroefication_using_EMGP.docx

Microsoft Word - 3. Vitroefication_using_EMGP.docx EM GP 冷 冻 样 品 制 备 实 习 教 程 (Xiaojun Huang, Gang Ji) 每 位 演 示 及 带 领 学 员 实 习 EM GP 冷 冻 样 品 制 备 的 老 师 的 材 料 清 单 : 1)15 个 GIG 载 网 2) 冷 冻 样 品 Ferritin 或 Ribosome 3)EM GP 专 用 镊 子 1 把 4)1-10ul 移 液 器,1 把 ( 移 液 器

More information

audiogram3 Owners Manual

audiogram3 Owners Manual USB AUDIO INTERFACE ZH 2 AUDIOGRAM 3 ( ) * Yamaha USB Yamaha USB ( ) ( ) USB Yamaha (5)-10 1/2 AUDIOGRAM 3 3 MIC / INST (XLR ) (IEC60268 ): 1 2 (+) 3 (-) 2 1 3 Yamaha USB Yamaha Yamaha Steinberg Media

More information

WFC40810

WFC40810 9000086873 (PD 85 05 10) Operating and Installation Instructions Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items

More information

CONGRATULATIONS ON YOUR PURCHASE OF OUR CAMERA This product has been carefully inspected through rigid quality control before shipment. With reasonabl

CONGRATULATIONS ON YOUR PURCHASE OF OUR CAMERA This product has been carefully inspected through rigid quality control before shipment. With reasonabl INSTRUCTIONS MANUAL SMOKE DETECTOR COLOR, B/W CCD CAMERA CONTENTS English / Chinese PREFACE SAFETY INSTRUCTIONS FUNCTION DESCRIPTION INSTALLATION SPECIFICATIONS PR0210SDE2 Thank you very much for purchasing

More information

Male Circumcision - Traditional Chinese

Male Circumcision - Traditional Chinese Male Circumcision Male circumcision is the removal of the foreskin around the end of the penis. If you decide on circumcision, your baby s doctor will do it in the hospital s nursery. If your baby is small

More information

Male Circumcision - Simplified Chinese

Male Circumcision - Simplified Chinese Male Circumcision Male circumcision is the removal of the foreskin around the end of the penis. If you decide on circumcision, your baby s doctor will do it in the hospital s nursery. If your baby is small

More information

WVT new

WVT new Operating and Installation Instructions 5120 004601 (PD 84 09 25) Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items

More information

LSC操作说明

LSC操作说明 1 C H R I S T A L P H A 1-4 LSC 型 Part. No. 102041 A L P H A 2-4 LSC 型 Part. No. 10204 冷 冻 干 燥 机 操 作 说 明 新 研 制 的 LSC-8 控 制 器, 具 备 图 形 显 示 功 能, 能 以 数 据 表 形 式 显 示 参 数, 并 可 选 配 控 制 软 件 LSC-8 1/4 VGA 大 屏 幕

More information

#FT66/68CN(01~07)

#FT66/68CN(01~07) : KX-FT66CN KX-FT68CN KX-FT66 Panasonic Panasonic ( ) KX-FT66 KX-FT68 : CN KX-FT66 : ( KME ) KME Kyushu Matsushita Electric Co., Ltd. 2000 2000 2 E. F. 1. 14. ( 2. ) 3. 15. 4. 5. / 6. 1. 2. 7. 3. 4. 8.

More information

D-VE45

D-VE45 3-231-554-12 (1) Portable VIDEO CD Player D-VE45 2001 Sony Corporation Z * * 2 1. 2. 3. 4. 1. 2. 3. Z Z Z Z Z Z 3 1 i 7 2 8 3 4 9 q; 5 +/ 6 x qa qs N> qd. 4 qf qg qh Z qj qk ql u w;. wa ws wd wf wg wh

More information

S3125A Dan hab yungh youq gij digih haijbaz 2000m doxroengz haenx ancienz sawjyungh. Cs-2

S3125A Dan hab yungh youq gij digih haijbaz 2000m doxroengz haenx ancienz sawjyungh. Cs-2 TX-NR525...2...4...10...19...23...40...55...61 Cs S3125A Dan hab yungh youq gij digih haijbaz 2000m doxroengz haenx ancienz sawjyungh. Cs-2 ON/STANDBY ON/STANDBY 17 17 10 20 * * POWERPOWER ON/STANDBY POWER

More information

國 立 政 治 大 學 教 育 學 系 2016 新 生 入 學 手 冊 目 錄 表 11 國 立 政 治 大 學 教 育 學 系 博 士 班 資 格 考 試 抵 免 申 請 表... 46 論 文 題 目 申 報 暨 指 導 教 授... 47 表 12 國 立 政 治 大 學 碩 博 士 班 論

國 立 政 治 大 學 教 育 學 系 2016 新 生 入 學 手 冊 目 錄 表 11 國 立 政 治 大 學 教 育 學 系 博 士 班 資 格 考 試 抵 免 申 請 表... 46 論 文 題 目 申 報 暨 指 導 教 授... 47 表 12 國 立 政 治 大 學 碩 博 士 班 論 國 立 政 治 大 學 教 育 學 系 2016 新 生 入 學 手 冊 目 錄 一 教 育 學 系 簡 介... 1 ( 一 ) 成 立 時 間... 1 ( 二 ) 教 育 目 標 與 發 展 方 向... 1 ( 三 ) 授 課 師 資... 2 ( 四 ) 行 政 人 員... 3 ( 五 ) 核 心 能 力 與 課 程 規 劃... 3 ( 六 ) 空 間 環 境... 12 ( 七 )

More information

Pneumonia - Traditional Chinese

Pneumonia - Traditional Chinese Pneumonia When you have pneumonia, the air sacs in the lungs fill with infection or mucus. Pneumonia is caused by a bacteria, virus or chemical. It is not often passed from one person to another. Signs

More information

Microsoft Word - HSK使用手册.doc

Microsoft Word - HSK使用手册.doc HSK / New HSK Online Mock Test/Practices Student User Manual Table of contents New User... 2 1.1 Register... 2 1.2 Login... 3 1.3 Homepage... 4 Free Test... 4 2.1 Start... 5 2.2 Results... 6 Mock Test...

More information

Microsoft Word - Front cover_white.doc

Microsoft Word - Front cover_white.doc Real Time Programme 行 情 报 价 程 序 Seamico Securities Public Company Limited WWW.SEAMICO.COM Table of Content 目 录 开 始 使 用 开 始 使 用 Z Net 程 序 程 序 1 股 票 观 察 者 4 每 日 股 票 按 时 间 的 交 易 查 询 10 多 股 同 列 13 股 票 行 情

More information

Guide to Install SATA Hard Disks

Guide to Install SATA Hard Disks SATA RAID 1. SATA. 2 1.1 SATA. 2 1.2 SATA 2 2. RAID (RAID 0 / RAID 1 / JBOD).. 4 2.1 RAID. 4 2.2 RAID 5 2.3 RAID 0 6 2.4 RAID 1.. 10 2.5 JBOD.. 16 3. Windows 2000 / Windows XP 20 1. SATA 1.1 SATA Serial

More information

1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源

1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源 1. 請 先 檢 查 包 裝 內 容 物 AC750 多 模 式 無 線 分 享 器 安 裝 指 南 安 裝 指 南 CD 光 碟 BR-6208AC 電 源 供 應 器 網 路 線 2. 將 設 備 接 上 電 源, 即 可 使 用 智 慧 型 無 線 裝 置 進 行 設 定 A. 接 上 電 源 B. 啟 用 智 慧 型 裝 置 的 無 線 Wi-Fi C. 選 擇 無 線 網 路 名 稱 "edimax.setup"

More information

LH_Series_Rev2014.pdf

LH_Series_Rev2014.pdf REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check

More information

Front 2 Polar F11 ( ) : Polar F11 Polar F11 Polar F11 Polar (Keeps U Fit - Own Workout Program) Polar Polar F11 Polar F11 Polar F11 Polar (

Front 2 Polar F11 ( ) : Polar F11 Polar F11 Polar F11 Polar (Keeps U Fit - Own Workout Program) Polar Polar F11 Polar F11 Polar F11 Polar ( Front 1 - Polar F11 Light OK Back Front 2 Polar F11 ( ) : Polar F11 Polar F11 Polar F11 Polar (Keeps U Fit - Own Workout Program) Polar Polar F11 Polar F11 Polar F11 Polar (www.polarfitnesstrainer.com)

More information

HCD0174_2008

HCD0174_2008 Reliability Laboratory Page: 1 of 5 Date: December 23, 2008 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified

More information

Lorem ipsum dolor sit amet, consectetuer adipiscing elit

Lorem ipsum dolor sit amet, consectetuer adipiscing elit English for Study in Australia 留 学 澳 洲 英 语 讲 座 Lesson 3: Make yourself at home 第 三 课 : 宾 至 如 归 L1 Male: 各 位 朋 友 好, 欢 迎 您 收 听 留 学 澳 洲 英 语 讲 座 节 目, 我 是 澳 大 利 亚 澳 洲 广 播 电 台 的 节 目 主 持 人 陈 昊 L1 Female: 各 位

More information

IP505SM_manual_cn.doc

IP505SM_manual_cn.doc IP505SM 1 Introduction 1...4...4...4...5 LAN...5...5...6...6...7 LED...7...7 2...9...9...9 3...11...11...12...12...12...14...18 LAN...19 DHCP...20...21 4 PC...22...22 Windows...22 TCP/IP -...22 TCP/IP

More information

Mixcder ShareMe 7 User Manual

Mixcder ShareMe 7 User Manual User s Manual MODEL:ShareMe7 Wireless Headphone Important safety instruction If used in the correct method, this design and production of this product can ensure your personal safety completely. However,

More information

安 全 資 訊 重 要 安 全 指 示 1. 閱 讀 這 些 指 示 2. 保 留 這 些 指 示 3. 留 意 所 有 警 示 4. 遵 循 所 有 指 示 5. 不 要 在 水 源 附 近 使 用 該 產 品 6. 使 用 乾 布 擦 拭 機 器 7. 不 要 阻 塞 任 何 通 風 口 按 照

安 全 資 訊 重 要 安 全 指 示 1. 閱 讀 這 些 指 示 2. 保 留 這 些 指 示 3. 留 意 所 有 警 示 4. 遵 循 所 有 指 示 5. 不 要 在 水 源 附 近 使 用 該 產 品 6. 使 用 乾 布 擦 拭 機 器 7. 不 要 阻 塞 任 何 通 風 口 按 照 AV 收 音 擴 大 機 1 使 用 手 冊 安 全 資 訊 重 要 安 全 指 示 1. 閱 讀 這 些 指 示 2. 保 留 這 些 指 示 3. 留 意 所 有 警 示 4. 遵 循 所 有 指 示 5. 不 要 在 水 源 附 近 使 用 該 產 品 6. 使 用 乾 布 擦 拭 機 器 7. 不 要 阻 塞 任 何 通 風 口 按 照 用 戶 手 冊 來 安 裝 該 產 品 8. 不 要

More information

On/Off/ FlexiClip HFC FlexiClip

On/Off/ FlexiClip HFC FlexiClip zh-hk M.-Nr. 09 715 890 ... 7... 19... 20... 21 On/Off/... 22... 22... 23... 24... 24... 26... 27... 27... 27... 27... 27... 28... 28 FlexiClip HFC72... 29 FlexiClip... 29... 34... 34... 34... 34... 34...

More information

S325A 2

S325A 2 PR-SC5509 S325A 2 ON/STANDBY ON/STANDBY POWER POWER ON/STANDBY POWER 3 24 24 24 34 * 4 VCR/DVR ON/STANDBY 86 5 * *2 *3 *4*5 -*6 *6 *5 *6 *7 *5 *8 *6 *7 *7 *7 *2 *9 *0 * * * *0 * 6 * *0 *2 *3 *4 *5 *6 *

More information

fi-4990c

fi-4990c C150-E192-01ZH fi-4990c fi-4990c 01 No. C150-E192-01ZH Le pésent appareil numérique n ément pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescridtes

More information

DSC-F717

DSC-F717 3-078-045-51(1) Digital Still Camera CT CS DSC-F717 2002 Sony Corporation 中 文 ( 繁 體 字 ) 警 告 為 防 止 發 生 火 災 或 電 擊 的 危 險, 請 勿 讓 本 機 暴 露 於 雨 中 或 受 潮 為 防 止 觸 電, 不 要 打 開 機 殼 只 有 有 資 格 的 人 員 才 能 進 行 維 修 注 意 本

More information

B _02_ch.indd

B _02_ch.indd KDC-X8016BT KDC-X8016BTL KDC-X7016 KDC-X7016L B64-4521-10/02 (MW) 2 KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L 3 2 > > 1 2 3 4 5 6 AUX 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 4 10 38 11 12 13 14 4

More information

HC50246_2009

HC50246_2009 Page: 1 of 7 Date: June 2, 2009 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR S3125A 2

WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR S3125A 2 TX-SR309 WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR S3125A 2 ON/STANDBY 3 16 16 16 11 4 * 4 VCR/DVR ON/STANDBY 43 5 *1*2 *3 *4 *5 *6 *1 *2 *3 *4 *5 *6 6 ON/STANDBY

More information

Microsoft Word - ChineseSATII .doc

Microsoft Word - ChineseSATII .doc 中 文 SAT II 冯 瑶 一 什 么 是 SAT II 中 文 (SAT Subject Test in Chinese with Listening)? SAT Subject Test 是 美 国 大 学 理 事 会 (College Board) 为 美 国 高 中 生 举 办 的 全 国 性 专 科 标 准 测 试 考 生 的 成 绩 是 美 国 大 学 录 取 新 生 的 重 要 依

More information

Captive Screws Styled knob series M3 thread size Smooth knob meets UL-1950 Designed for hand operation Spring ejected Wide variety of sizes, re

Captive Screws Styled knob series M3 thread size Smooth knob meets UL-1950 Designed for hand operation Spring ejected Wide variety of sizes, re 440 47 Captive Screws d knob series M3 thread size Smooth knob meets U-1950 Designed for hand operation Spring ejected Wide variety of sizes, recesses and installation options Material and Finish : Press-in:

More information

MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE

MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE MODEL COLOR LIST UZ125D2 YMW GRAY YNF RED YRG BLUE 30H WHITE MODEL COLOR LIST UZ125D2K K13 BLACK YRG BLUE YPK WHITE MODEL COLOR LIST UZ125X2 G22 Q05 GRAY ORANGE GREEN WHITE N28 W08 PREFACE When it becomes

More information

WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventila

WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventila The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. http://www.sony-asia.com/section/support Sound Bar Operating Instructions

More information

4. 每 组 学 生 将 写 有 习 语 和 含 义 的 两 组 卡 片 分 别 洗 牌, 将 顺 序 打 乱, 然 后 将 两 组 卡 片 反 面 朝 上 置 于 课 桌 上 5. 学 生 依 次 从 两 组 卡 片 中 各 抽 取 一 张, 展 示 给 小 组 成 员, 并 大 声 朗 读 卡

4. 每 组 学 生 将 写 有 习 语 和 含 义 的 两 组 卡 片 分 别 洗 牌, 将 顺 序 打 乱, 然 后 将 两 组 卡 片 反 面 朝 上 置 于 课 桌 上 5. 学 生 依 次 从 两 组 卡 片 中 各 抽 取 一 张, 展 示 给 小 组 成 员, 并 大 声 朗 读 卡 Tips of the Week 课 堂 上 的 英 语 习 语 教 学 ( 二 ) 2015-04-19 吴 倩 MarriottCHEI 大 家 好! 欢 迎 来 到 Tips of the Week! 这 周 我 想 和 老 师 们 分 享 另 外 两 个 课 堂 上 可 以 开 展 的 英 语 习 语 教 学 活 动 其 中 一 个 活 动 是 一 个 充 满 趣 味 的 游 戏, 另 外

More information

LK110_ck

LK110_ck Ck 电子琴 LK110CK1A Ck-1 1. 2. 1. 2. 3. (+) ( ) Ck-2 1. 2. 3. * 1. 2. 3. Ck-3 Ck-4 LCD LCD LCD LCD LCD LCD 15 * * / MIDI Ck-5 100 50 100 100 100 1 2 MIDI MIDI Ck-6 ... Ck-1... Ck-6... Ck-8... Ck-9... Ck-10...

More information

r_09hr_practical_guide_kor.pdf

r_09hr_practical_guide_kor.pdf PRACTICAL GUIDE TO THE EDIROL R-09HR 3 4 PRACTICAL GUIDE TO THE EDIROL R-09HR 5 Situation 1 6 1 2 3 PRACTICAL GUIDE TO THE EDIROL R-09HR WAV MP3 WAV 24 bit/96 khz WAV 16 bit/44.1 khz MP3 128 kbps/44.1

More information

HC20131_2010

HC20131_2010 Page: 1 of 8 Date: April 14, 2010 WINMATE COMMUNICATION INC. 9 F, NO. 111-6, SHING-DE RD., SAN-CHUNG CITY, TAIPEI, TAIWAN, R.O.C. The following merchandise was submitted and identified by the vendor as:

More information

目 录 目 录 1. 安 装 和 快 速 入 门 附 件 1.1 随 机 附 件... 3 1.2 附 件 信 息... 3 连 接 和 设 定 1.3 连 接... 3 1.4 记 录 纸... 4 快 速 入 门 1.5 发 送 传 真 / 复 印... 5 1.6 接 收 传 真... 5 2

目 录 目 录 1. 安 装 和 快 速 入 门 附 件 1.1 随 机 附 件... 3 1.2 附 件 信 息... 3 连 接 和 设 定 1.3 连 接... 3 1.4 记 录 纸... 4 快 速 入 门 1.5 发 送 传 真 / 复 印... 5 1.6 接 收 传 真... 5 2 KX-FT832CN KX-FT836CN KX-FT836 感 谢 您 购 买 Panasonic 传 真 机 请 于 使 用 前 仔 细 阅 读 操 作 使 用 说 明 书, 并 妥 善 保 管 本 机 与 来 电 显 示 兼 容 您 必 须 向 服 务 供 应 商 / 电 话 公 司 申 请 并 取 得 相 应 的 服 务 目 录 目 录 1. 安 装 和 快 速 入 门 附 件 1.1 随

More information

LCT C-C_CS

LCT C-C_CS LAMP POWER ENGLISH ENGLISH HD-Z70RX5 HD-Z56RX5 Rear Projection TV INSTRUCTIONS LCT1913-001C-C LAMP/PROGRAM POWER - - HD-ILA - * H b 6 p 1 LAMP/PROGRAM POWER 26 2 LAMP/PROGRAM POWER LAMP/PROGRAM POWER

More information

untitled

untitled Sansa Fuze TM MP3 1-866-SANDISK (726-3475) www.sandisk.com/techsupport www.sandisk.com/sansa Fuze-8UM-CHS ... 3... 4 Sansa Fuze TM... 6... 6... 7... 7 Sansa Fuze... 7... 8... 9... 9... 10... 11... 11...

More information

IMPORTANT SAFETY INSTRUCTIONS / When using an electrical appliance, basic safety precautions should always be followed, including the following:read a

IMPORTANT SAFETY INSTRUCTIONS / When using an electrical appliance, basic safety precautions should always be followed, including the following:read a 1-NEEDLE, 3-THREAD OVERLOCK SEWING MACHINE MO-623 INSTRUCTION MANUAL IMPORTANT: READ ALL SAFETY REGULATIONS CAREFULLY AND UNDERSTAND THEM BEFORE USING YOUR SEWING MACHINE. RETAIN THIS INSTRUCTION MANUAL

More information

SCPH-143A

SCPH-143A English 3-072-345-51(2) Instruction manual Thank you for purchasing the LCD screen (for PS one ). Before using this product, carefully read this manual and retain it for future reference. This LCD screen

More information

VP2765-LED-1_UG_SCH.book

VP2765-LED-1_UG_SCH.book ViewSonic VP2765-LED LCD Display Model No. : VS13963 ... 1... 2... 3... 4... 4... 5... 5... 6 /... 7... 7 ( )... 8 LCD... 9... 9... 10... 12... 16... 17... 18 LCD... 19... 20 ViewSonic VP2765-LED FCC FCC

More information

S3125A 2

S3125A 2 TX-SR308 S3125A 2 ON/STANDBY 3 16 16 11 4 * 4 VCR/DVRON/STANDBY 44 5 * *1 *2 *3 *4 * *1 *2 *3 *4 * * 6 ON/STANDBY 18 TUNING MODE 21 STANDBY 18 DISPLAY 19 HDMI THRU 33 SETUP 28 SPEAKERS AB 10 20 TUNINGPRESET

More information

Cube20S small, speedy, safe Eextremely modular Up to 64 modules per bus node Quick reaction time: up to 20 µs Cube20S A new Member of the Cube Family

Cube20S small, speedy, safe Eextremely modular Up to 64 modules per bus node Quick reaction time: up to 20 µs Cube20S A new Member of the Cube Family small, speedy, safe Eextremely modular Up to 64 modules per bus de Quick reaction time: up to 20 µs A new Member of the Cube Family Murrelektronik s modular I/O system expands the field-tested Cube family

More information

REMOTEAIRPRO说明书中英文版

REMOTEAIRPRO说明书中英文版 REMOTE AIR PRO Product Manual Welcome to your new REMOTE AIR PRO REMOTE AIR PRO Whatʼs Included Instruction manual 1 Motor Installation The motor is mounted on 19 mm or 15 mm rods. For 15 mm rods use

More information

Epson

Epson WH / MS CMP0087-00 TC WH/MS EPSON EPSON EXCEED YOUR VISION EXCEED YOUR VISION Seiko Corporation Microsoft and Windows are registered trademarks of Microsoft Corporation. Mac and Mac OS are registered trademarks

More information

(baking powder) 1 ( ) ( ) 1 10g g (two level design, D-optimal) 32 1/2 fraction Two Level Fractional Factorial Design D-Optimal D

(baking powder) 1 ( ) ( ) 1 10g g (two level design, D-optimal) 32 1/2 fraction Two Level Fractional Factorial Design D-Optimal D ( ) 4 1 1 1 145 1 110 1 (baking powder) 1 ( ) ( ) 1 10g 1 1 2.5g 1 1 1 1 60 10 (two level design, D-optimal) 32 1/2 fraction Two Level Fractional Factorial Design D-Optimal Design 1. 60 120 2. 3. 40 10

More information

RAID RAID 0 RAID 1 RAID 5 RAID * ( -1)* ( /2)* No Yes Yes Yes A. B. BIOS SATA C. RAID BIOS RAID ( ) D. SATA RAID/AHCI ( ) SATA M.2 SSD ( )

RAID RAID 0 RAID 1 RAID 5 RAID * ( -1)* ( /2)* No Yes Yes Yes A. B. BIOS SATA C. RAID BIOS RAID ( ) D. SATA RAID/AHCI ( ) SATA M.2 SSD ( ) RAID RAID 0 RAID 1 RAID 5 RAID 10 2 2 3 4 * (-1)* (/2)* No Yes Yes Yes A. B. BIOS SATA C. RAID BIOS RAID ( ) D. SATA RAID/AHCI ( ) SATA M.2 SSD ( ) ( ) ( ) Windows USB 1 SATA A. SATASATAIntel SATA (SATA3

More information

ebook140-8

ebook140-8 8 Microsoft VPN Windows NT 4 V P N Windows 98 Client 7 Vintage Air V P N 7 Wi n d o w s NT V P N 7 VPN ( ) 7 Novell NetWare VPN 8.1 PPTP NT4 VPN Q 154091 M i c r o s o f t Windows NT RAS [ ] Windows NT4

More information

Microsoft PowerPoint - STU_EC_Ch08.ppt

Microsoft PowerPoint - STU_EC_Ch08.ppt 樹德科技大學資訊工程系 Chapter 8: Counters Shi-Huang Chen Fall 2010 1 Outline Asynchronous Counter Operation Synchronous Counter Operation Up/Down Synchronous Counters Design of Synchronous Counters Cascaded Counters

More information

您 對 本 產 品 的 選 擇 充 分 顯 示 了 您 對 音 響 設 備 的 精 通, 我 們 十 分 感 謝 您 的 惠 顧, 並 為 本 公 司 提 供 優 質 產 品 一 貫 傳 統 而 感 到 無 比 的 自 豪 為 使 您 的 裝 置 與 使 用 能 得 到 最 好 的 發 揮, 我 們

您 對 本 產 品 的 選 擇 充 分 顯 示 了 您 對 音 響 設 備 的 精 通, 我 們 十 分 感 謝 您 的 惠 顧, 並 為 本 公 司 提 供 優 質 產 品 一 貫 傳 統 而 感 到 無 比 的 自 豪 為 使 您 的 裝 置 與 使 用 能 得 到 最 好 的 發 揮, 我 們 NT-503 USB DAC/Network Player 關 於 此 機 器 的 網 路 功 能, 請 看 網 路 說 明 書 使 用 者 說 明 書 與 網 路 說 明 書 可 以 從 TEAC Global Site (http://www.teac-global.com/) 下 載 USB D/A 轉 換 器 / 網 路 播 放 機 使 用 說 明 書 欲 播 放 USB 快 閃 記 憶 體

More information

coverage2.ppt

coverage2.ppt Satellite Tool Kit STK/Coverage STK 82 0715 010-68745117 1 Coverage Definition Figure of Merit 2 STK Basic Grid Assets Interval Description 3 Grid Global Latitude Bounds Longitude Lines Custom Regions

More information

WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventila

WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventila Sound Bar Operating Instructions GB CT The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. http://www.sony-asia.com/section/support

More information

/ 212ºF (100ºC) 2 UL CR2032 DL2032 3 Wave SoundTouch SoundTouch SoundTouch Bose / 3 Bose Corporation 1999/5/EC 32ºF (0 C) 113

/ 212ºF (100ºC) 2 UL CR2032 DL2032 3 Wave SoundTouch SoundTouch SoundTouch Bose / 3 Bose Corporation 1999/5/EC  32ºF (0 C) 113 Owner s Guide / 212ºF (100ºC) 2 UL CR2032 DL2032 3 Wave SoundTouch SoundTouch SoundTouch Bose / 3 Bose Corporation 1999/5/EC www.bose.com/compliance. 32ºF (0 C) 113ºF (45 C) 1 EN/IEC 60825 CD 1 1 CLASS

More information

26-15003117x-New Royal-TWN-03.indd

26-15003117x-New Royal-TWN-03.indd 請 登 錄 您 的 產 品 以 獲 得 支 援, 網 址 www.philips.com/welcome 26 繁 體 中 文 Type HD8930 使 用 說 明 書 26 TWN 使 用 咖 啡 機 前, 請 仔 細 閱 讀 本 說 明 書 目 錄 前 言...3 一 般 說 明 ( 圖 1)...3 重 要 指 示...4 設 計 用 途... 4 電 源 - 電 源 線... 4 為 了

More information